Berridge Product Catalog 2012

MANUFACTURING COMPANY2012 PRODUCT CATALOG

FREEDOM OF FORM IN ARCHITECTURALMETAL SYSTEMS

Roofs • Walls • Soffits • Mansards • CeilingsFascia • Facades • Equipment Screens • Restoration

Berridge exclusive on-site fabricationtechnology provides:

Custom Contoured PanelsCurved Barrel Vault Panels

Tapered PanelsCompound Curved Panels

Long Length Panels

For Technical or Sales Assistance:

(800) 669-0009www.berridge.com

BERRIDGE

© 2012 Berridge Manufacturing Company • 800-669-0009 • www.berridge.comAll information subject to change without notice.

2

tee-panel curved tee-panel high seam tee-panel cee-lock zee-lock

curved zee-lock batten seam bermuda panel spanish tile s-tile

victorian shingle classic shingle rustic shake fish scale fluted fascia

hs-12 & hs-8 hr-16 vee-panel fw-12 l-panel

b-6 panel flush seam thin line s-deck deep deck

m-panel r-panel double rib curved flat seam arch. privacY fencing

General Information ..........................................................3Green Sustainable Information ..........................................4Berridge Standard, Metallic & Premium Colors ................. 5Berridge Finishes & Product Specifications....................... 6Berridge Testing Summary Chart .....................................7Standing Seam Roof Systems .....................................8-13Other Roof Systems ..................................................14-15

Simulated Tile Roof Systems.......................................16-17Metal Shingles .............................................................18-19Fascia, Wall & Soffit Panels ........................................20-27Exposed Fastener Roof & Wall Panels .......................28-31 Special Application Products ......................................32-33Light-Gauge Framing Components .................................. 34Vantage Point Retrofit Roof System ................................. 35

BERRIDGE ARCHITECTURAL METAL PRODUCTS

8

20

25

30

9

21

26

10

22

27

31 31 32 33

11

23

28

12-13

24

29

12

18

14

18

15

19

16

19

17

32


3

Since 1970, Berridge Manufacturing Company has provided customers with the industry’s highest quality metal roofing and siding products. For over 40 years, the company has specialized in the research and development of architectural sheet metal products. Many similar products listed in Sweet’s Catalog were originally designed and developed by Berridge Manufacturing Company.

Berridge’s unique Total Program is a comprehensive approach to supplying superior products and services to customers around the world. The Total Program offers a full range of precision-tolerance portable roll forming machines, painted coil and flat sheet, and over 30 panel styles, all backed by technical and marketing support. The Total Program presents an unparalleled range of products and depth of service that has placed Berridge at the forefront of the architectural metal panel industry.

In response to market demand, Berridge developed reconstructive building products for the restoration of historical buildings. A complete line of residential roofing and siding products round out the extensive product line, giving Berridge the industry’s most comprehensive line of architectural metal products.

Shop drawings and engineering services for all Berridge products are available upon request. Contact Berridge’s Technical Department at 1-800-231-8127 for pricing or assistance. Architectural details and specifications are available at www.berridge.com.

Berridge’s modern, high-production equipment provides customers with low cost, top-quality products. Highly specialized manufacturing equipment converts large, bare Galvalume and galvanized steel coils into pretreated, prefinished, high quality fabricated architectural sheet metal products. Berridge equipment includes a continuous coil

coating line, slitting lines, cut-to-length lines, roll formers, mechanical and hydraulic press-brakes, punch presses, stamping and bending fixtures, and a variety of special dies. This complete line of in-house equipment not only produces top-of-the-line products at the most competitive prices but assures prompt delivery as well.

In 1984, Berridge revolutionized the architectural metal panel industry with the introduction of the Model SS-14 Portable Roll Former. This unique machine was designed to roll continuous length, straight, standing seam panels as well as curved panels. Today, over 10 different panels including standing seam, soffit and wall panels may be formed using Berridge portable roll formers. Contact Berridge Sales Department at 1-800-669-0009 for more information about the Model SS-14 and other Berridge portable roll formers.

Right: Curved Panel Applications are possible with Berridge Portable Roll-Formers. Curved standing seam roof panels are curved at the job site.

Above: The unique patented Berridge Vinyl WeatherSeal, which is used on all standing seam and Bermuda Panel systems, provides extra watertight integrity.

INTRODUCTION & SERVICE

PORTABLE ROLL FORMERS

EQUIPMENT

Berridge SS-1421 High Seam Tee-Panel Portable Roll Former can form straight and curved roof panels in continuous lengths to eliminate panel end splices. Machine also curves factory formed snap-on seam caps.

Berridge CL-21 Cee-Lock Portable Roll Former forms straight standing seam roof panels in continuous lengths to eliminate panel end splices. Machine also inserts patented vinyl weatherseal in female snap-lock leg.

4 © 2012 Berridge Manufacturing Company • 800-669-0009 • www.berridge.comAll information subject to change without notice.

4

BERRIDGE IS COMMITTED TO “GREEN” SUSTAINABLE COOL METAL ROOFING

recYcled content of berridge metalberridge metal products have a high recycled content and are 100% recyclable at the end of their lifespan. using building products that incorporate recycled materials helps reduce the impacts resulting from the extraction and processing of natural resources.

post-consumer* steel recycled content 25.5%pre-consumer* steel recycled content 6.8%total recYcled content 32.3%

*these values are based on data from the steel recycling institute (november, 2009) and may vary.

leed® v3 2009 compliancein addition to meeting leed® criteria for ss credit 7.2: heat island effect and for mr credit 4: recycled content, using berridge metal products can contribute to other leed® points. reference the technical bulletins section at www.berridge.com for complete information on berridge’s compliance with leed® v3 2009. while every effort has been made to provide accurate information, applicants for leed® certification should verify compliance with a leed® expert. for more information on leed® 2009 certification visit www.usgbc.org.

berridge metal roofing is cool & sustainablethe high reflectivity, emissivity and solar reflectance index (sri) of berridge metal roofing helps mitigate the heat island effect. berridge’s kynar 500® & hylar 5000™ cool metal roof colors are optimal for reducing energy consumption, particularly where cooling loads dominate. for leed® compliance, reference sri values for berridge color finishes below.

Berridge ColorsSolar

Reflectivity Emissivity SRIAlmond 67.10 0.90 82

Aged Bronze 29.66 0.86 30

Antique Copper Cote 29.30 0.85 29

Award Blue 17.20 0.83 12

Bristol Blue 30.30 0.86 31

Buckskin 39.71 0.86 43

Burgundy 30.05 0.85 30

Champagne 34.95 0.85 36

Charcoal Grey 29.64 0.87 30

Colonial Red 33.03 0.85 34

Copper Brown 29.57 0.87 30

Copper-Cote 45.24 0.87 51

Dark Bronze 28.20 0.91 30

Deep Red 38.54 0.84 41

Forest Green 29.08 0.85 29

Hartford Green 28.20 0.90 30

Hemlock Green 30.92 0.83 30

Lead-Cote 32.90 0.90 35

Matte Black 28.70 0.91 30

Medium Bronze 31.39 0.85 32

Natural White 75.93 0.84 93

Parchment 51.72 0.83 58

Patina Green 34.42 0.86 36

Preweathered Galvalume 33.61 0.80 32

Royal Blue 29.90 0.90 32

Shasta White 60.00 0.84 70

Sierra Tan 34.81 0.84 36

Teal Green 28.10 0.89 29

Terra-Cotta 31.66 0.83 31

Zinc-Cote 52.45 0.87 61

Zinc Grey 37.88 0.84 40

Satin Finish Galvalume 74.00 0.14 67

Acrylic Coated Galvalume 67.00 0.06 55

SRI Values are provided by Berridge’s paint supplier and may vary slightly. Reference www.berridge.com for the most up-to-date information on Berridge SRI Values.


5

All colors except Award Blue comply with LEED® v3 & Energy Star requirements for steep slope roofs greater than 2:12. Almond & Natural White comply with LEED® v3 requirements for low slope roofs, 2:12 or less. Natural White also complies with Energy Star requirements for low slope roofs, 2:12 or less.

BERRIDGE MANUFACTURING COMPANYKYNAR 500® HYLAR 5000™COLOR FINISHES

TEAL GREEN BURGUNDY DEEP REDMATTE BLACK

HARTFORD GREENZINC GREY COLONIAL REDROYAL BLUE

HEMLOCK GREEN TERRA-COTTABRISTOL BLUECHARCOAL GREY

FOREST GREEN PATINA GREENSHASTA WHITE SIERRA TAN

AWARD BLUE COPPER-COTETM

LEAD-COTETM PREWEATHERED GALVALUME®

ANTIQUE COPPER-COTE

CHAMPAGNE

ZINC-COTETM

NATURAL WHITE

BUCKSKIN PARCHMENT

AGED BRONZE

MEDIUM BRONZE

COPPER BROWN

DARK BRONZE

ALMOND

PREMIUM COLORS

ACRYLIC-COATED GALVALUME®

Berridge premium colors require a nominal surcharge.

METALLIC COLORS

STANDARD COLORS

Berridge metallic colors are premium finishes which require a nominal surcharge.Due to limitations in the printing process, please request actual color chips for accurate color viewing.

Due to limitations in the printing process, please request actual color chips for accurate color viewing.

NATURAL METAL FINISH

Ber r i dge Ac ry l i c -Coa ted Galvalume® is a coated sheet product that combines the corrosion resistance of GALVALUME® steel sheet with a clear, organic resin applied to the top side and bottom side of GALVALUME® substrate.

(800) 669-0009www.berridge.com

Energy Star is only valid in the

United States.


6

Berridge owns and operates its own modern continuous coil coating line in San Antonio, Texas, painting both 48” and 42” wide Galvalume® master coils.

notes:1. Special colors and finishes are available. Please consult Berridge for pricing and delivery. 2. Berridge metallic finishes are premium finishes and require a nominal surcharge.3. Galvalume® is a registered trademark of BIEC International, Inc.4. Kynar 500® is a registered trademark of Arkema, Inc.5. Hylar 5000TM is a registered trademark of Solvay Solexis.

All Berridge-applied colors are premium fluoropolymer coatings produced with full strength Kynar 500® or Hylar 5000™ resin. Kynar 500® or Hylar 5000™ affords maximum exterior durability due to its outstanding resistance to ultraviolet radiation. Full-strength Kynar 500® or Hylar 5000™ color finishes carry a 20-year warranty against cracking, peeling and fading (not to exceed 5 N.B.S. units). These are the highest quality exterior finishes available!

Metallic colors are processed and finished on Berridge’s continuous coil-coating line. These proprietary finishes are available for all factory products, flat sheet, and coil. Flat sheets and coils in metallic finishes are available to sheet metal companies for fabrication of special profiles, shapes or flashing. Berridge Metallic Finishes include:

COPPER-COTE™ANTIQUE COPPER-COTECHAMPAGNE ZINC-COTE™LEAD-COTE™PREWEATHERED GALVALUME®

* Metallic Finishes are premium colors which require a nominal surcharge.

Acrylic-Coated Galvalume® (ACG) is a coated sheet product that combines the corrosion resistance of GALVALUME® steel sheet with a clear, acrylic coating that is applied over GALVALUME® substrate. The surface treatment is essentially invisible but it provides excellent characteristics to enhance the performance and applicability of GALVALUME® steel sheet. These enhancements include: good rollformability without the need for oils, excellent transit and field-storage performance without staining, dramatic decrease in finger printing or foot printing during installation and long term surface brightness when exposed to the environment. It is applied at the mill by roll-coating a uniform, thin film of a water-base acrylic solution onto both surfaces of the sheet.

KYNAR 500® OR HYLAR 5000TM COLORS & NATURAL METAL FINISHES

BERRIDGE METALLIC FINISHES*

COATING SYSTEM

ACRYLIC-COATED GALVALUME®

SPECIFICATIONS FOR ALL 24-GAUGE & 22-GAUGE* BERRIDGE PRODUCTS IN GALVALUME®

SHEET METAL MATERIAL

A. Prefinished metal shall be Aluminum-Zinc Alloy Coated (AZ-55 Galvalume®) Steel Sheet, 24-Gauge or 22-Gauge*, ASTM 792-08, Grade 40, yield strength 40 ksi min.

B. Finish shall be full strength Kynar 500® or Hylar 5000™ fluoropolymer coating applied by the manufacturer on a continuous coil coating line, with a top side dry film thickness of 0.75 ± 0.05 mil over 0.20 ± 0.05 mil prime coat, to provide a total top side dry film thickness of 0.95 ± 0.10 mil. Bottom side shall be coated with a primer and beige urethane coating with a total dry film thickness of 0.35 ± 0.05 mil. Finish shall conform to all tests for adhesion, flexibility, and longevity as specified by the Kynar 500® or Hylar 5000™ finish supplier.

C. Strippable film shall be applied to the top side of all prefinished metal to protect the finish during fabrication, shipping and field handling. This strippable film MUST be removed immediately before installation.

D. Unpainted metal shall be Aluminum-Zinc Alloy Coated (AZ-55 Acrylic Coated Galvalume®) Steel Sheet, 24-Gauge or 22-Gauge*, ASTM 792-08, Grade 40, yield strength 40 ksi min., with clear acrylic coating on both sides of material.

E. Field protection must be provided by the contractor at the job site so stacked or coiled material is not exposed to weather and moisture.

F. Flashing maybe factory fabricated or field fabricated. Unless otherwise specified all exposed adjacent flashing shall be of the same material and finish as panel system.

Note: The rolling process of sheet metal results in inherent surface unevenness referred to as “oil-canning.” This condition is also caused by several factors including thermal expansion and contraction, dark colors, both medium and high-gloss finishes, and uneven substrate. “Oil-canning” in itself is not sufficient cause for material rejection.

*not all products and colors are available in 22-gauge.

for complete specifications visit www.berridge.com

Protective Strippable Film (painted material only)0.75 ± 0.05 mil Kynar500® Hylar5000™ top coat0.20 ± 0.05 mil primer coat24 gauge or 22 gauge Galvalume substrate0.35 ± 0.05 mil total dry film thickness for primer coat (non-metallics only) & beige urethane backer coat (all colors)


7

ul 90 - Uplift Tests of Roof Systemul 1897 - Uplift Tests of Roof Systemul 790 - Fire Tests of Roof Systemul 263 - Fire Tests of Construction and Materialsul 2218 - Impact Resistance of Prepared Roof Covering Materialsastm e-1592 - Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Differenceastm e-330 - Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference

astm e-2140 - Water Penetration of Metal Roof Panel Systems by Static Water Pressure Headastm e-1646 - Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Differenceastm e-1680 - Rate of Air Leakage Through Exterior Metal Roof Panel Systemsastm e-331 - Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Differenceastm e-283 - Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified

Pressure Differences Across the Specimenfm 4471 - This standard states Approval requirements for Class 1 Panel Roofs. A Class 1 Panel Roof meets the criteria of this standard for fire, wind, foot traffic & hail damage resistance.florida product approval - Standard of practice for product evaluations and consistency of enforcement for the state of Florida.miami-dade approval - Established with its main goal to allow new and innovated ideas to be developed into useful, practical, lasting and safe products for use in High Velocity Hurricane Zones.

BERRIDGE TESTING SUMMARY CHART

standing seam roof panels ul 90

ul 1897

ul 790

ul 263

ul 2218

astm e 1592

astm e 330

astm e 2140

astm e 1646

astm e 1680

astm e 331

astm e 283

fm 4471

flprodapp

miamidade

Tee Panel • • • • • • • • • •High Seam Tee Panel • • • • • • • • • •Cee-Lock Panel • • • • • • • • • • • •Zee-Lock Panel (Single Lock) • • • • • • • • • • • • •Zee-Lock Panel (Double Lock) • • • • • • • • • • • • • •other roof sYstems ul

90ul

1897ul 790

ul 263

ul 2218

astm e 1592

astm e 330

astm e 2140

astm e 1646

astm e 1680

astm e 331

astm e 283

fm 4471

flprodapp

miamidade

Bermuda Roof Panel • • • • •Spanish Tile Roof System • • • •S-Tile Roof Panel • • • • •Batten Seam Roof System • • • • • •Victorian & Classic Shingles • • • •Rustic Shake Shingle • •Curved Flat Seam Panel • •"R" Panel • • • • •"M" Panel • • • • •Deep Deck Panel • • • • • • • •S-Deck • • • •Double Rib Panel • • • • •fascia, wall & soffit panels ul

90ul

1897ul 790

ul 263

ul 2218

astm e 1592

astm e 330

astm e 2140

astm e 1646

astm e 1680

astm e 331

astm e 283

fm 4471

flprodapp

miamidade

Flush Seam Panel • • •L-Panel • • •HR-16 Panel • • • • •HS Wall Panels • •FW-12 Panel • • • • •Thin Line Panel • •B-6 Panel • •Fluted Fascia Panel • •

For actual test results, technical questions, fastener types, fastener spacing, or job-specific engineering, please contact Berridge’s Technical Department at (800) 669-0009. Updates and additional testing are added on a continual basis. Consult Technical Dept. for the latest updates.


8

Berridge Tee-PanelMetal Standing Seam with exclusive patented vinyl weatherseal as an integral part of Snap-On Seam. For residential or commercial construction with solid sheathing.

• Available in 24 gauge steel• Concealed fasteners• Extruded vinyl weatherseal as integral part

of Snap-on seam cap• UL 580 tested• UL 90 wind uplift & UL fire resistance listed• ASTM air & water resistance tested• Florida Product Approval• May be site-formed in continuous

lengths with Berridge SS-14 portable roll former

• Convex (min 4’) & concave (min 6’) curving with Berridge SS-14 portable roll former

stan

ding

sea

m me

tal

roof

sYs

tems

1” (25 mm)

12 ¾” Coverage (324 mm)

See www.berridge.com for Details and SpecificationsVinyl Weatherseal: US Patent No. 4641475

Snap-On Seam(with Vinyl Weatherseal)

Tee-Panel


9

Berridge Curved, Compound Curved & Tapered Tee-PanelMetal Standing Seam with exclusive patented vinyl weatherseal as an integral part of Snap-On Seam. Concave, convex or compound curved cornersand domed roof construction withsolid sheathing.

• Available in 24 gauge steel• Concealed fasteners• Extruded vinyl weatherseal as integral part of

Snap-on seam cap • UL 580 tested• UL 90 wind uplift & UL fire resistance listed• ASTM air & water resistance tested• Florida Product Approval• Site-formed & curved with Berridge

SS-14 portable roll former (Use SL-24 for tapered & SL-1 for compound curved panels)

standing seam metal roof sYstems

1” (25 mm)

12 ¾” Coverage (324 mm)Width at eave varies on tapered Tee-Panel

See www.berridge.com for Details and Specifications Vinyl Weatherseal: US Patent No. 4641475


Tee-Panel


10

• Available in 24 gauge steel• Concealed fasteners• Extruded vinyl weatherseal as integral part

of Snap-on seam cap• UL 580 tested• UL 90 wind uplift & UL fire resistance listed• ASTM air & water resistance tested• Florida Product Approval• May be site-formed in continuous lengths

with Berridge SS-1421 portable roll former• Consult Berridge for minimum radius.

(Striated profile is standard)

stan

ding

sea

m me

tal

roof

sYs

tems

Berridge High Seam Tee-PanelMetal Standing Seam with exclusive patented vinyl weatherseal as an integral part of Snap-On Seam. For residential or commercial construction with solid sheathing.

1” or 1 ½”(25 mm or 38 mm)

18 ¼” Coverage (464 mm)

See www.berridge.com for Details and Specifications


Tee-Panel

Vinyl Weatherseal: US Patent No. 4641475


11

Cee-Lock PanelCee-Lock Clip or Continuous Cee-Rib

Vinyl Weatherseal (Optional) is required for Watertight Warranties.

Vinyl Weatherseal: US Patent No. 4641475

• Available in 24 & 22-gauge steel• Easy to install, integral snap-lock seam• UL 90 wind uplift & UL fire resistance listed• Concealed fasteners• Patented vinyl weatherseal (optional)• Striated profile is available• ASTM air & water resistance tested• ASTM E-1592 tested• UL 1897 tested• Miami-Dade approved• Florida Product Approval• May be site-formed in continuous

lengths with Berridge CL-21 portable roll former

1 ½”(38 mm)

16 ½” Coverage (419 mm)



Berridge Cee-Lock PanelMetal Standing Seam with exclusive patented vinyl weatherseal as an integral part of Snap-Lock Seam. Residential andcommercial construction with solid sheathing.


12

Berridge Zee-LockArchitectural/Structural standing seam roof system for use over open purlin framing or solid sheathing. Straight or curved applications.

• Available in 24 & 22 gauge steel • Extruded patented* vinyl weatherseal• Mechanically seamed sidelap• 2” high standing seam sidelap• UL 90 wind uplift & UL fire resistance listed• ASTM air & water resistance tested• ASTM E-1592 & UL 580/UL 1897 tested• ASTM E-2140 tested• Corps of Engineers CEGS 07416 approved• Miami-Dade Approved• Florida Product Approval• Optional striated profile available• Continuous lengths when site-formed with SP-21 portable roll-former• Site-curved with ZC-21 curving machine

notes: Zee-Lock Panel with continuous 24 GA Zee-Rib. Values based on 1996 edition of AISI and good engineering practice.

ZEE-LOCK SECTION PROPERTIES BASED ON 24 GA 40 K.S.I.

ZEE-LOCK IX (in4/ft) MA (ft.lbs/ft) VA (lbs/ft)

Positive Bending 0.1525 184.65 990

Negative Bending 0.1031 161.33 990

The Berridge Zee-Lock Seamer locks the sidelap seam in a single pass. Use continuous Zee-Rib with vinyl for best performance.

berridge curved zee-lockBerridge Zee-Lock Single Lock can be curved to a minimum radius of 20’ using the Berridge ZC-21 Curver machine. Curving of the panel to be done on-site.

stan

ding

sea

m me

tal

roof

sYs

tems

2”51 mm

ZEE-LOCK PANEL CROSS-SECTION

¼”

16”406 mm

1 3/16”

11/16”


ZEE-LOCK PANEL ASSEMBLYOPTIONAL

SNAP-ON BATTEN CAP

Optional Extruded Vinyl Weatherseal (*US Patent No. 5134825) Note: Vinyl Weatherseal required for open framing and curved

applications as well as for Watertight Warranties.

Continuous Zee-Rib or Zee-Clip


13

notes: Zee-Lock Panel with continuous 24 GA Zee-Rib. Values based on 1996 edition of AISI and good engineering practice.

ZEE-LOCK SECTION PROPERTIES BASED ON 24 GA 40 K.S.I.

ZEE-LOCK IX (in4/ft) MA (ft.lbs/ft) VA (lbs/ft)

Positive Bending 0.1525 184.65 990

Negative Bending 0.1031 161.33 990

Berridge Zee-Lock Double-LockArchitectural/Structural standing seam roof system for use over open purlin framing or solid sheathing.

• Available in 24 gauge steel• Mechanically double-locked sidelap• 2” high standing seam sidelap• UL 90 wind uplift & UL fire resistance listed• FMRC Approved & 1-120 rated• ASTM air & water resistance tested• ASTM E-1592 & UL 580/UL 1897 tested• ASTM E-2140 tested• Florida Product Approval• Miami-Dade Approval• Optional striated profile available• Continuous lengths when site-formed with SP-21 portable roll-former

The Berridge Zee-Lock Double-Lock Seamer double locks the sidelap seam in a single pass. Not available for use with vinyl weatherseal.

ZEE-LOCK DOUBLE-LOCK PANEL ASSEMBLY

The 180-degree mechanically seamed Zee-Lock seam is not available with vinyl weatherseal.

Continuous Zee-Rib


2”51 mm

ZEE-LOCK PANEL CROSS-SECTION

¼”

16”406 mm

1 3/16”

11/16”



14

Berridge Batten Seam Panel

• Available in 24 gauge steel• Spans over open purlins• Concealed fasteners• UL 90 & UL fire resistance listed• Florida Product Approval• May be site-formed in continuous lengths with Berridge BP-21 portable roll-former

Two-part system utilizes Deep Vee Panel and square Snap-On battens for more visible seams. May be installed over open framing or solid sheathing.

2”

Snap-On Batten Cap

1 ¾”(45 mm)

16” Coverage (406 mm)

othe

r ro

of s

Yste

ms

See www.berridge.com for Details and Specifications Deep-Vee Panel


15

1”(25 mm)


other roof sYstems

Berridge Bermuda PanelTraditional Bermuda roof design. Continuous length panels for roof, fascia or mansard.

• Available in 24 gauge steel• Strong horizontal lines• Optional patented* vinyl weatherseal• Smooth, stepped appearance• Concealed fasteners• UL90 listed• Optional wood grain embossed texture• Florida Product Approval• May be site-formed in continuous lengths

using Berridge BP-14 portable roll former

See www.berridge.com for Details and Specifications Vinyl Weatherseal: US Patent No. 5134825


16

Berridge Spanish TilePrefinished metal Spanish Tile System usedwith Deep-Vee Panel. Eliminates the need for solid sheathing and furring strips.

2”(51 mm)

8” Width (203 mm)Spanish Tile

9” Width (227 mm)Deep-Vee Panel

1 ½”(38 mm)


Eave Closure

simu

late

d ti

le r

oof

sYst

ems

• Available in 24 gauge steel• Stronger and lighter than clay tiles• May be installed over open framework• Available in all standard Berridge

Kynar 500® or Hylar 5000TM finishes• Florida Product Approval• UL 580/UL 1897 tested• Concealed fasteners



17

Berridge S-TilePrefinished metal S-Tile panels with aclean, crisp simulated tile appearance.

3’ min - 40’ max

14” (350 mm) 14” (350 mm) 14” (350 mm)

1 ½”(38 mm)

32 11/16“ Coverage (830 mm)

simulated tile roof sYstems

• Available in 24 gauge steel• Light weight: only 1.2 pounds per

square foot• Available in all standard Berridge

Kynar 500® or Hylar 5000TM finishes• Exposed fasteners• Miami-Dade approved• Florida Product Approval• UL 580/UL 1897 tested• Continuous length eave-to-ridge

panels up to 40’ long for fast installation without panel endlaps



18

Berridge Victorian ShinglesPrefinished Kynar 500® Hylar 5000TM or Acrylic Coated Galvalume® traditional shingle for restoration, residential & commercial construction with solid sheathing for roofs or walls. Concealed Fasteners. Florida & Miami-Dade approved. 24 gauge steel. UL 580/UL 1897 tested.

Berridge Classic ShinglesPrefinished Kynar 500® Hylar 5000TM or Acrylic Coated Galvalume® traditional shingle for restoration, residential & commercial construction with solid sheathing for roofs or walls. Concealed Fasteners. Florida & Miami-Dade approved. 24 gauge steel. UL 580/UL 1897 tested.

9” Coverage(229 mm)




meta

l sh

ingl

es


19

Berridge Rustic Shake ShinglesPrefinished heavy-gauge shingles with concealed fasteners for residential or commercial construction with solid sheathing. Florida Product Approval. 24 gauge steel.

Berridge Fish Scale ShinglesHistorical product for gable, sidewall, steep mansard or fascia applications (80°+) with solid sheathing. 24 gauge steel.

8 ½”(216 mm)

11 ½” Coverage (292 mm)



metal shingles


20

fasc

ia, w

all

& so

ffit

pan

els

7/ 8”(22 mm)


9 5/ 8” (244 mm)

hs-12 wall panel


5 5/ 8” (143 mm)

hs-8 wall panel7/ 8”

(22 mm)

Detail of HS-12 & HS-8Panel Interlock

Berridge HS-8 & HS-12Prefinished horizontal or vertical wall panel.Versatile and maintenance-free.

• 24 gauge with stucco embossed texture• Available in 22 gauge• Concealed fasteners• Multi-purpose wall panel• May be used horizontally or vertically• May be used for soffit applications• Wide rib appearance• Interlocks with HR-16 wall panel• Factory formed to 40’ max• ASTM E-1592 tested• Florida Product Approval• Consult Berridge for smooth finish availability



21

Berridge HR-16Prefinished horizontal or vertical wall panel. Versatile and maintenance-free.

Detail of HR-16Panel Interlock

fascia, wall & soffit panels


4” (102 mm)

1 1/ 8”(29 mm)

1 5/ 8”(41 mm)

hr-16 wall panel

7/ 8”(22 mm)

• 24 gauge smooth• Available in 22 gauge• Concealed fasteners• May be used horizontally or vertically• Narrow-rib appearance• Multi-purpose panel• Florida Product Approval• Miami-Dade Approved• ASTM E-1592 tested• Factory formed to 40’ max

Berridge HR-16 can be installed horizontally or vertically.

Berridge HR-16 is an ideal corrugated wall panel for large expanses. Interlocks with HS-8 & HS-12



22

Berridge Vee-PanelWall, soffit and facade systemVersatile and maintenance freePrefinished metal wall panels for open spans

3/8”(10 mm)

12 3/4” (324 mm)

4 1/4” (108 mm)

vented vee-panel notes: Panel provides 6.08 square inches of Net Free Vent Area (NFVA) per square foot of panel (6.46 square inches per linear foot). Berridge Manufacturing Company does not recommend vented products in applications subject to aggressive atmospheres, marine environments or high humidity due to the corrosive nature of these environments on raw edges of steel.

fasc

ia, w

all

& so

ffit

pan

els

• 24 gauge standard• Available in 22 gauge• Concealed fasteners• Vee-Groove appearance• Use horizontally for soffit• Use vertically for facade or wall• Panel may be vented• Open framing or solid deck applications• Optional wood grain embossing

Berridge Vee-Panel is great for walls, fascia and soffit applications.

Berridge Vee-Panel can be installed vertically on curved fascia applications.

Berridge Vee-Panel can be vented for soffit applications.See www.berridge.com for Details and Specifications


23

Berridge FW-12 PanelWall, Liner or Soffit Panels. Versatile, maintenance-free, prefinished metal wall panels for open spans.

1 1/2”(38 mm)


4” (102 mm)

Available smooth without grooves.

vented fw-12 notes: Panel provides 7.79 square inches of Net Free Vent Area (NFVA) per square foot of panel (7.79 square inches per linear foot). Berridge Manufacturing Company does not recommend vented products in applications subject to aggressive atmospheres, marine environments or high humidity due to the corrosive nature of these environments on raw edges of steel.


• 24 gauge standard• Available in 22 gauge• Concealed fasteners• Flush appearance• Multi-purpose panel• Use horizontally for soffit• Use vertically for facade or wall• Available with or without grooves• Florida Product Approval• Miami-Dade Approved• ASTM E-1592• Optional stucco embossing (Recommended for wall applications)

Berridge FW-12 can be vented for soffit applications.

Berridge FW-12 is a multipurpose wall, fascia and soffit panel as shown above.

With a 12” coverage, Berridge FW-12 panel is ideal for large soffit and ceiling applications.



24

Berridge L-PanelVersatile, maintenance-free, prefinished metal liner or soffit panels for open spans.

vented l-panel notes: Panel provides 5.35 square inches of Net Free Vent Area (NFVA) per square foot of panel (5.19 square inches per linear foot). Berridge Manufacturing Company does not recommend this product in applications subject to aggressive atmospheres, marine environments or high humidity due to the corrosive nature of these environments on raw edges of steel.

Available smooth without grooves.

Available with one groove.

1”(25 mm)

11 5/8” Coverage (290 mm)

Standard with two grooves.

fasc

ia, w

all

& so

ffit

pan

els

• 24 gauge standard • Consult BMC on 22 gauge availability• Concealed fasteners• Flush appearance• Use vertically for fascia applications • Available with or without grooves• Panel may be vented• Florida Product Approval• Miami-Dade Approved• ASTM E-1592 • May be site-formed using Berridge FP-16

portable roll former

Berridge L-Panel is an economical and versatile panel for fascia, soffit, liner, and celing applications. Available with 2 grooves, 1 groove or no grooves as shown above.

Berridge B-6 Panel can be used vertically on curved wall applications.Berridge L-Panel can be vented for soffit applications.

Berridge L-Panel is a great soffit panel and can be site-formed with the FP-16 portable roll former.



25

Berridge B-6 PanelPrefinished soffit panels for open spans to finish underside with maintenance-free metal.


5/ 8”(16 mm)


• 24 gauge steel• Concealed fasteners• Use vertically for fascia, facade or siding• Self-venting• Spans over open framework or solid sheathing• Florida Product Approval

Berridge B-6 Panel can be used vertically on curved wall applications.

Berridge B-6 Panel can be used vertically on curved wall applications. Berridge B-6 Panel is a great option for interior ceiling and wall applications.

Berridge B-6 Panel is a good option for fascia and soffit applications and provides a sleek, corrugated appearance.



26

Berridge Flush SeamWith rigid embossed texture for soft, uniform reflectivity. Prefinished fascia or soffit panel for open spans to provide flat appearance.

3 7/8” Coverage (98 mm)

½”(13 mm)

fasc

ia, w

all

& so

ffit

pan

els

• 24 gauge steel• Spans over open framework or solid sheathing• Concealed fasteners• Flat appearance• Stucco embossed texture• Multi-purpose panel• Use horizontally for soffit• Use vertically for facade or wall• Self-venting• Optional wood grain texture• Florida Product Approval

Berridge Flush Seam can be used vertically on curved wall applications. Panel does not curve.

Berridge Flush Seam’s embossed texture make it a good option for large wall expanses.

Berridge Flush Seam is a multipurpose wall, soffit and liner panel and can also be used in interior ceiling applications as shown above.



27

Berridge Thin-LineVersatile, maintenance-free, prefinished metal fascia, facade, wall or soffit panels for open spans.

3 5/8” (91 mm)

3/8”(9 mm)


• 24 gauge steel• Channel drain interlock• Narrow, strong panel• Smooth appearance• Concealed fasteners• Thin extruded appearance• Use horizontally for soffit• Use vertically for fascia or wall• Optional wood grain or stucco embossed texture• Florida Product Approval

Berridge Thin Line panel provides smooth, narrow lines.

Berridge Thin Line is a multipurpose wall,soffit, liner, ceiling and fascia panel.



28

Berridge S-DeckCorrugated structural metal sheathing. S-Deck may be curved for covered walkways, shelter covers, etc.

• 24 gauge standard• Available in 22 gauge• Vertical and horizontal applications• 32” panels can be factory curved• Minimum 5’ radius for curved panels • Florida Product Approval• ASTM E-1592 tested

Nominal 32” Coverage (813mm)

2 2/3”67 mm

7/8”22 mm

curved s-deck notes: Curved S-Deck is available in 32” exposure panels only. Berridge recommends lapping two corrugations on panel side laps when using curved S-Deck. Exposure will be 29-1/3” with two laps or 32” with one lap.

eXpo

sed

fast

ener

roo

f &

wal

l pa

nels

7/8”22 mm

Nominal 34 2/3” Coverage (880mm)

2 2/3”67 mm



29

Berridge Deep-DeckPrefinished corrugated 7.2” roof or wall panel for use on open framing or solid sheathing.

2” (51 mm)

1 ½”(38 mm)


7.2” (183 mm)

eXposed fastener roof & wall panels

• 24 gauge standard• Available in 22 gauge• Wide, economical 36” coverage• Vertical & horizontal applications• Structural properties• Multi-use panel: roof, wall, deck• Purlin bearing leg standard• Florida Product Approval• ASTM E-1592 tested



30

Berridge M-PanelPrefinished or Acrylic Coated Galvalume, wall, soffit, fascia, mansard, liner or equipment screen panel

38 ¼” Overall Width (972 mm)

1” (25 mm)


6” (152 mm) 3 ½” (89 mm)2 ½” (64 mm)

eXpo

sed

fast

ener

roo

f &

wal

l pa

nels

• 24 gauge standard• Available in 22 gauge• Wide, 3-foot coverage• UL 90 approved• Spans over open purlins• Florida Product Approval



31

Berridge R-PanelPrefinished or Acrylic Coated Galvalume, wall, soffit, fascia, mansard, liner or equipment screen panel

38 ¼” Overall Width (972 mm)

1” (25 mm)1¼”(32 mm)


4” 4” 4” 12” (305 mm)

Berridge Double-Rib PanelPrefinished or Acrylic Coated Galvalume exposed fastener panel for use over solid sheathing.

12” (305 mm)

½”(13 mm)


eXposed fastener roof & wall panels

• 24 gauge standard• Available in 22 gauge• Wide, 3-foot coverage• UL 90 approved• Spans over open purlins• Florida Product Approval• UL 580/UL 1897 tested

• 24-gauge steel• Wide, economical 24” coverage• Residential or utility • Traditional appearance• Florida Product Approval




32

Berridge Fluted FasciaInterlocking panels with fluted texture for large expansive walls, fascia or steep mansards. 24 gauge.• 34 ½” x 10” exposure • Panel interlock for wind resistance• Multi-use panel • Florida Product Approval

Berridge Curved Flat SeamPrefinished flat seam metal panel system with concealed fasteners. Hand curve over solid sheathing. Florida Product Approval. 24 gauge steel.


3/8”(9 mm)


3/16”(5 mm)

spe

cial

tY a

ppli

cati

on p

rodu

cts

Berridge Curved Flat Seam is hand-curved over solid decking.




33

Architectural Privacy FenceBerridge’s Architectural Privacy Fencing utilizes Berridge’s Spaceframe 24 GA metal studs, track & blocking combined with a wide selection of factory produced panels and 16 GA posts.

Berridge SpaceframeBerridge Spaceframe Building System components are used for the construction of light-commercial and residential projects.

• 24-gauge Berridge Spaceframe Components• Sturdy 16-gauge galvanized steel posts• Available in 4’2”, 6’2”, 8’2” & 10’2” heights• Consult BMC for other fence heights• 31 Berridge Kynar 500© Hylar 5000™ Colors• 20-Year Paint Finish Limited Warranty• Permanent: will not rot, fade, crack or split• Residential or commercial applications• Level and sloped applications• 100% recyclable materials• Interlocking panels with concealed fasteners• Choose from 5 Berridge 24-gauge panels: Vee-Panel, Flush Seam, Thin-Line, B-6, HR-16.

24 GA Studs3 1/2” X 1 1/2”

24 GA Track3 9/16” X 1 9/16”

24 GA Blocking3 1/2” X 24”

16 GACee-Channel 2 1/2” X 8”

phYsical properties gross properties

Thickness (in)

Depth(in)

Flange(in)

Lip(in)

Weight (lb/ft)

Ag(in2)

Ix(in4)

Sx(in3)

Iy(in4)

Sy(in3)

rx(in)

ry(in)

single stud 0.024 3.5 1.450 --- 0.535 0.157 0.252 0.155 0.043 0.039 1.265 0.526

double stud 0.024 3.5 1.450 --- 0.535 0.31491 0.504 0.309 0.149 0.097 1.265 0.689

torsional properties full braced properties & allowable strength

J(in4)

Cw(in6)

Xo(in)

Ae(in2)

Ix(in4)

Sx(in3)

Tension(lbs)

Moment(lbs•ft)

Shear(lbs)

single stud 0.00003023 0.0715 -1.045 0.105 0.252 0.155 3771 309 1171

double stud 0.00006046 0.14307 0.00 0.21001 0.504 0.309 7542 618 2343

Double Stud Assembly

specialtY application products



34

24-gauge & 16-gauge components Weight/LF A(in2)(Full)

I (Effective) in4 Allow. Moment (in. - kips) Allow. Shear

(kips)T.I.C. B.I.C. T.I.C. B.I.C.

Hat Section Purlin24-Gauge

3 ¼”

5 1/16”

1 1/4”

1 5/8” 0.65 lbs .1900 .0665 .0679 1.61 1.77 1.01

Framing Section24-Gauge

3 3/8”

1 ¾”

½”

2 1/8”

5/8”.065 lbs .1900 .0759 .0866 1.80 2.26 1.08

Channel Section24-Gauge

¾”1 ¾”

2”

0.47 lbs .1380 .0530 .0556 1.15 1.21 1.08

Furring Channel24-Gauge

7/8”

1 ¼”

1 3/8”2 3/8”

½” 0.35 lbs .1030 .0180 0.180 0.78 0.86 0.53

High Purlin16-Gauge

2”

3” ½”1 ½” ½” 1.43 lbs 0.422 .151 5.74 2.71

Low Purlin16-Gauge

1 ½”

2 ½” ½”3/4”5/8” 0.82 lbs 0.242 .017 1.51 0.61

Angle 1 ½” x 2”16-Gauge

1 ½”2” 0.69 lbs 0.203 .084 .029 1.78 0.56 1.31

Channel 4” x 2”16-Gauge 4”

2”

½”1.70 lbs 0.501 1.22 17.7 3.76

Channel & Zee Purlin4” x 2 ½”16-Gauge

2 ½”

4”

2 ½”

4”

1.97 lbs 0.557 1.42 18.4 3.84


2”

½”2.10 lbs 0.621 3.15 30.6 3.45

Channel & Zee Purlin6” x 2 ½” 16-Gauge

2 ½”

6”

2 ½”

6” 2.41 lbs 0.677 3.61 31.8 3.20


2”

½”2.50 lbs 0.737 6.43 45.0 2.36

Channel & Zee Purlin8” x 2 ½”16-Gauge

2 ½”

8”

2 ½”

8” 2.82 lbs 0.797 7.09 47.7 2.36

notes for 24 ga (0.60 mm) & 16 ga (1.52 mm) shapes:1. Values based on 2007 North American Specification for the Design of Cold-Formed Steel Structural members, with compression flange braced against lateral buckling.2. Net section properties are used for resisting moment determination and allowable shear loads.3. Minimum yield strength = 40 ksi for 24 gauge shapes and 50 ksi for 16 gauge shapes (Galvanized steel material).

4. E = 29,500 ksi.5. Values are for upward and downward loads.6. T.I.C. = Top in Compression7. B.I.C. = Bottom in Compression

fra

ming

mem

bers

3/4”

3/4”

3/4”


35

3

5

6

1

7

2

Roof Plane4

VANTAGE POINT: MORE THAN JUST A NEW ROOF — IT’S A

WHOLE NEW LOOK!

Solution: Berridge Vantage Point Retrofit Roof System provides a totally new design appearance, hides unsightly mechanical equipment, and offers watertight integrity.

Problem: Flat roofs can sometimes become problematic and unsightly with rooftop units, mechanical equipment, and pooling water.

AFTER

BEFORE

Thermal & Mechanical Considerations Insulation The space between the old and new roof allows for low-cost, blanket

insulation to greatly reduce heating and cooling costs. Vapor Barrier (if required) A vinyl vapor barrier on the underside of the blanket insulation avoids

condensation from the building penetrating insulation and reaching the framing system and roof panels.

Mechanical Equipment Any existing and new mechanical equipment should be located at ground

level to reduce penetrations. Ventilation The new attic space can be vented with ridge vents or louvers. Thermal Movement Accommodated at the eaves and with inner-rib expansion joints.

BASIC VANTAGE POINTRETROFIT ROOF ASSEMBLY

Berridge VANTAGE POINT reroofing system combines a new aesthetic look with simple mechanical attachment over existing flat, built-up roofs that will last for years to come. VANTAGE POINT is more than just a patch-up or a re-roof solution; it is a permanent new roof with a new higher profile which gives your old building a totally new look. The sloped, light-weight, self-supporting metal panels need no substrate, thus avoid-ing extra weight and cost. They provide a watertight standing seam that sheds water in contrast to dated, flat, built-up roofs which are subject to water pooling and subsequent leakage. Added insulation may be placed on the existing flat roof.

retrofit roof sYstem

Economical Installation—No Tear-Off Required!

High-Quality Structural/Architectural Panel

The Berridge Zee-Lock architectural/structural standing seam roof systems provides superior aesthetic appearance and excellent performance.

Single-Source ConvenienceThe installer orders all necessary coil material & components and all pre-cut retrofit roof system framing members from Berridge.

A Retrofit Design Checklist for Architects & Designers

Roof Design: Low slope to steep mansard profile. Intersecting planes such as hips, dormer and valleys should be kept to a minimum.

Penetrations: Minimize penetrations such as skylights, curbs for roof-mounted heating or air-conditioning units, etc.

ZEE-LOCK

5 6

Hat-Channel24 Gauge

3 ¼”

5 1/16”

1 1/4”

1 5/8”

Open-Track16 Gauge

4 1/4”

2”

1 16 ga. Cee-Channel. Connect ea. end w/ (4) #12-14 self-drilling fasteners.

2 16 ga. Eave Strut. Connect to beam w/ (2) #12-14 self-drilling fasteners.

3 41 2

Cee-Channel16 Gauge

2 ½”

4” 3/4”

Zee-Purlin 16 Gauge

2 ½”

4”3/4”

Eave Strut16 Gauge

Zee-Purlin 16 Gauge

2 ½”

4” 4”3/4”

3 16 ga. Continuous 4” x 2-1/2” Zee-Purlin Roof Support.

4 16 ga. Continuous 4” x 2-1/2” Retrofit Zee-Purlin.

5 24 ga. Hat-Channel. Connect to beam w/ (2) #12-14 self-drilling fasteners ea flange.

6 16 ga. Open-Track x 1’-0” Long. Anchor into wall. Connect to beam w/ (2) #12-14 self-drilling fasteners ea flange.

7 24 ga. 2” Bottom Flange Strapping at Purlin mid-span. Connect to purlin w/ (1) #12-14 self-drilling fastener.

Disclaimer: Project specific engineering required. Consult Engineering Dept. for pricing. Suggested detail shown above may not be applicable to every project.

SPECIFY BERRIDGEARCHITECTURALMETAL PRODUCTS!www.berridge.com

Berridge California Sales Corporation is a separate entity from Berridge Manufacturing Company.Berridge Product Catalog - 2012 | 13M | Printed in the USA.

*

Berridge Manufacturing Company is registered with the AIA Continuing Education System (AIA/CES) and is committed to developing quality learning activities in accordance with the CES criteria. Please call Berridge’s Staff Architect at 800-231-8127 to schedule a seminar.

BMC SAN ANTONIOCorporate Headquarters6515 Fratt RoadSan Antonio, Texas 78218(800) 669-0009 toll-free(210) 650-3050 local(210) 650-0379 fax

BMC SEGUINProduction Facility2201 Rudeloff RoadSeguin, Texas 78155(830) 401-5200 local(830) 303-0530 fax

BMC HOUSTONBranch Facility & Technical1720 Maury StreetHouston, Texas 77026(713) 223-4971 local(713) 236-9422 fax

BMC DALLASBranch Facility2015 California CrossingDallas, Texas 75220(972) 506-8496 local(972) 506-8478 fax

BMC ATLANTABranch Facility319 Lee Industrial RoadAustell, Georgia 30168(770) 941-5141 local(770) 941-7344 fax

BMC CHICAGOBranch Facility1175 Carolina RoadW. Chicago, Illinois 60185(630) 231-7495 local(630) 231-7520 fax

BMC DENVERBranch Facility7505 East 41st AvenueDenver, Colorado 80216(303) 322-3703 local(303) 322-3810 fax

BERRIDGE CALIFORNIASALES CORPORATION*18732 Corby AvenueArtesia, California 90701(562) 402-2081 local(562) 865-7878 fax

Documents

Berridge Product Catalog 2012