BESI Over the Shoulder Harness - american-bus-inc.comamerican-bus-inc.com/wp-content/uploads/2015/11/ABA-vests-harness... · Our Over the Shoulder Harness is designed and tested to

Our Over the Shoulder Harness is designed and tested to meet FMVSS-213 standard,

along with FMVSS-302 flammability requirements. The Harness must be used with an

existing lap belt in order to meet the FMVSS-213 Standard. The Over the Shoulder

Harness is an added way to give extra upper body support when being transported in a

school bus.

Part No:

SBRYHAR-1: Child Hi Back

SBRYHAR-2: Child Low Back

SBRYHAR-3: Adult Hi Back

SBRYHAR-4: Adult Low Back

Height Requirement

For Child Harness: From the crease in the seat to the top of the child’s shoulders the

measurement must be between 11.5” and 18”

For Adult Harness: From the crease in the seat to the top of the adult’s shoulders the

measurement must be between 19” and 29”

Weight Requirement

20lbs to 165lbs

**Recommended replacement after 5 years in service.**

Besi Over the Shoulder Harness

Parts Specialist for ALL School Bus Bodies

123 Citycentre Dr. Cincinnati, OH 45216 T: (800) 582-7118 F: (513) 679-4424

Besi Protech III



Accommodates children 25-90lbs, maximum waist size 30.5" and up to

51"tall

Pro Tech III has been dynamically tested and meets the FMVSS 213 Standards.

Height adjustment for verifying torso heights

6 point securement

Made with durable fire block school bus seating material

Seams are RF sealed eliminating sewn seams, this process is used in the Medical

industry to not allow liquid penetration, just clean

Memory foam construction with lumbar support for comfort

Pro Tech III: Stay with the bus in seat position or conveniently fold and store

away in pouch. Does not require Lap or Shoulder Belts, Adjust easily to fit the

child, allows for safely and comfortably transporting children.

Seat mount fits Low Back, NY hi-back, and Seat Belt ready seats for school buses

Recommended to replace 5 years after being put in service

1 year warranty

Besi Protech III



Installation Sheet

Unlatch lift and tilt seat cushion forward.

Znfold unit. T ake the cam-wrap strap with the

buckle tongue end and drop down between

Push the Pro-Tech snug against the seat back. Connect the cam-wrap on the back of the seat and adiust to a snug pos1t1on

:When A using the Pro-Tech II Place child in seat, connect the color coded straps together pull the adjustment straps to fit firmly across the hip and shoulder areas.

the back and cushion.

lhe straps should be firm enough for you to place your index finger between the child and the belt.

�ut cushion in place and latch. Under the cushion, bring forward and connect the 1" strap to the front side push buckle (holding the pad on the seat)

5d just for torso ii heights; lower slip

for shorter, middle slip for medium and

------ii upper slip for taller. :----i_l _.

then Slide

into webbing

the correout

corslot to make the proper adjustment

6.Jhen using the Pro-Tech III Place child in seat, connect the left and right side straps into the center push button buckle, pull the adiustment straps to fit firmly across the hip and shoulder areas.

Warning! This securement must only be used on school bus seats. Entire seat directly behind must be unoccupied or have secured occupants.

Our Securement Vests are dynamically tested to meet FMVSS-213 standard, along withFMVSS-302 flammability requirements.

The BESI and UNIVERSAL Safety Securement Vest is available in 3 color coded sizes:small, medium and large.

The BESI Safety Vest comes with 2 separate zipper inserts that gives you the ability toadjust to any size child! Inserts expand the vest 2" and 4". Both inserts may be zippedtogether to expand the vest up to 6". (shown below)

BESI and UNIVERSAL Safety Securement Vests are color coded by size. The seatmounts are color coded to match the vest.

The UNIVERSAL Vest is offered with attached inserts. The attached inserts are two 3"panels with a maximum expansion of 6". Also, includes shoulder adjustability.

4 point securement w/o crotch strap 5 point w/ crotch strap

SMALL MEDIUM LARGE Waist Size Range - 22" to 28" Waist size range - 30" to 36" Waist Size Range - 38" to 44"

SBRVEST25CST SBRVEST33CST SBRVEST41CST only available with crotch strap

SBRVEST33ADJ without crotch strap

SBRVEST41ADJ without crotch strap

TAN MAROON GREY



Besi Universal Securement Vest

Adjustable Securement Vest

1. Lift the cushion portion of the bench seat, and place the male

end of the cam wrap buckle in the space between the seat

cushion and seat back. Close and secure the seat cushion

assembly. On some seats lifting the seat cushion is unnecessary,

simply push the male end of the seat mount through the seat

bite, between the cushion and back until it is visible from behind

and below the seat.

2. Place the female end of the seat mount buckle over the top of

the seat back and bring the male end around from the bottom.

Click belt buckle together making sure that red release button is

facing inward

3. heck to make sure that bottom hooks of seat mount are 1 to 3

inches out of the seat bite; then tighten the seat mount until an

indentation is made in the top of the seat foam.

1. With passenger sitting down secure the upper and lower D-

rings of the vest to the snap hooks on the seat mount.

2. Make sure passenger is snug against the seat bottom and back.

If adjustment is necessary unhook the top D-rings from the snap

hooks and raise or lower the upper yoke of the seat mount

using the provided adjuster, then secure D-rings.

3. Recheck to make sure that the seat mount is tight and adjust as

necessary.

Attaching Vest To Seat Mount



Besi Universal Securement Vest

BESI / Universal Securement Vest Installation Instructions



Go quickly and safely.Convenient, innovative fold up case* opens

up quickly to provide a five-point child restraint.

The C.E. White Portable Child Restraint Seat (PCR) from HSM Transportation Solutions

Designed for transporting young children, this innovative PCR provides the best of both worlds:

a convenient fold up carrying and storage case when not in use, then it unfolds fast into a

five-point restraint system that meets National Highway Transportation Safety Administration

(NHTSA) regulations for children.

* Patent Pending

C E White Portable Child Seat



Vertical shoulder

height adjustments

Attaches quickly and easily to any school

bus seat without requiring seat belt

All belts and attachment straps fold conveniently

inside the self-contained carrying case*Accommodates

children 20–90 lbs.

and up to 57" height

Meets and exceeds FMVSS 213

and all Head Start Standards

To install, drivers simply place the carrying case on the

seat, unfasten the Velcro lip and unfold the case to create a

cushioned seat. A belt wraps around the bus seat and attaches

to the PCR, while the built-in five-point harness provides an

adjustable restraint system for children from 20 to 90 pounds.

When not in use, the seat converts to a self-contained carrying

case with an adjustable strap that creates a handle or shoulder

strap which makes it easy to carry, reducing wear and tear and

increasing the useful life of the system.

Make life easier and safer: Go with the C.E. White PCR system from HSM Transportation Solutions

* Patent Pending

C E White Portable Child Seat



STANDARD ADJUSTABLE

All E-Z-ON safety vests...exceed the requirements of Federal impact test standards. They are dynamically tested and designed for the specific transportation needs of children, teenagers and adults who have physical, behavioral, emotional and aging special needs.

XXS-S has sewn crotch straps that meet NHTSA guidelines

Portable or sewn crotch straps are available to order sizes M-LG

MEETS FMVSS 213

Must use with E-Z-ON ’s vehicle tether mount, floor mount, or wheel chair mount

Fits ages 2 through adult 20-168 lbs.

Accessories are available

Replace after crash or 5 years from the date of manufacture.

WAIST MEASUREMENTS REQUIRED

EXTRA SMALL SMALL MEDIUM LARGE

Waist Size 19”, 20”, 22” Waist Size 25”, 27”, 29” Waist Size 32”, 34”, 36” Waist Size 37”, 39”, 41”

SBREZ103ZSXXS SBREZ103ZSS SBREZ103ZSM SBREZ103ZSL

CROTCH STRAP CROTCH STRAP CROTCH STRAP

E-Z-ON Adjustable Vests



FLOOR MOUNT – (for use in vans)

Floor Mount that is designed for use in all Passenger Vehicles.

Works in conjunction with the E-Z-On Vest to safely secure the individual

Comes with 2 sets of hardware that need to be installed in the vehicle itself behind

the seat where the person will be seated.

Meets and passes federal standards

2 straps come over the top and 2 straps go under the seat to attached to the vest

SEAT MOUNT – (school bus only use)

Portable Seat Mount has only been tested on school buses use in vans are at

customer’s risk

The Portable Seat Mount works with all of the E-Z-On Vests

Use without seatbelt

E-Z-ON® hooks attach to metal slots on an adjustable vest at the shoulders, and

attach to D-rings on the hip strap

E-Z-ON Types of Mounts



E-Z-ON Standard Vests



XX Small (22”) CROTCH STRAP

Small (25”) CROTCH STRAP

Small Medium (28”) CROTCH STRAP

Medium (32”) CROTCH STRAP

Medium Large (34”)

Large (37”) Extra Large (37”)

Extra Exrta Large (43”)

Portable seat mount

SBREZ101ZSXXS SBREZ101ZSS SBREZ101ZSSM SBREZ101ZSM SBREZ102ZSML SBREZ102ZSL SBREZ102ZSXL SBREZ102ZSXXL

Vest Only

SBREZ101ZBXXS SBREZ101ZBS SBREZ101ZBSM SBREZ101ZBM SBREZ102ZBML SBREZ102ZBL SBREZ102ZBXL SBREZ102ZBXXL

MAX VEST – “HOUDINI PROOF”

Some kids can get out of whatever you put on them. They are amazing escape artists who can distract

the bus driver, disrupt the other passengers and put themselves and others in danger by being

unrestrained while the vehicle is moving. The MAX VEST will hold your escape artist in place to their final

destination.

The MAX was tested with extreme conditions and far exceeds any expectation for performance. Try the

MAX and see why it’s the product that Head Start, Special Needs and the School Transportation Industry

has been asking for.

DETAILS

The MAX Vest is all one piece

All adjustable pieces and clips

are now located behind the seat

Zipper has a hook clip to

prevent unzipping

Backpack provided with the

vest for the transportation of vest

with student

Vest can’t be left on the seat

since it is all once piece

****Even though it has been tested

in extreme conditions and will keep

tougher kids in their seat, the Max

vest can’t guarantee kids won’t be

able to get out of them.

E-Z-ON Max Vests



1. Locate the anchor point and prepare the seatfor the installation (unlock and/or open the bottomseat), hardware kit included.

2. Have the person/child step into the crotch straps(or use the method that you have been trained thatworks best). You may find it works best to put thearms through first or use your own policy.

3. Place the arms through the arm holes(just as in our normal vest configuration)

4. Close the vest snuggly around the person/childusing the back zipper closure. To keep the zipperlocked in place, clip the mini hook into the zipper.

5. Release the crotch strap from the Velcro locatedinside the zipper closure as this secures the crotchstraps in place.Note: the crotch strap must remain inside the zipperclosure.

6. Lay the crotch strap and tether on top of the seat

7. Position the person/child onto the seat

a. Lower the hip straps through the bight of the seat

b. Attach the tether strap to the anchor point

c. Pull both hip straps downward and hook thestraps into the D ring. Adjust as snug as possible.If the hip straps are too long, you can criss-crossthem to take up any excess length.

d. Adjust the tether strap so that it is taut withoutslack – keeping the shoulders snug against the back seat

e. Adjust the crotch strap so it is also snug

f. Buttocks must be tight against the bight,and shoulders must be snug to the seat back(child must be seated as straight and tight againstthe seat back as possible).

g. Adjust each shoulder harness so they aresnug without allowing the lower hip straps toleave the pelvic area. Push in the adjuster whilepulling on the shoulder strap to lengthen. Just pullthe loose end of the webbing to shorten. Thenreplace the Velcro strap.

2

4

7e

7c

7f

7d

3

7a 7b

7g

Behind the Seat

Behind the Seat

Behind the Seat

Behind the Seat

FOR SCHOOL BUS USE ONLY

“MAX” INSTRUCTIONS

Read and understand instructions thoroughly prior to product use. Follow all written instructions and refer to illustrations where provided.

E-Z-ON Max Vest


“MAX” EMERGENCY RELEASE The MAX will have a red deSignation on the chest straps and tether to easily identify a MAX VesT.

“MAX” PROPERLY INSTALLED

EMERGENCY RELEASETo remove childs, 3 cuts of strapping are necessary. The firSt 2 cutS are the hip StrapS which are cut above the hip strap adjuster. The 3rd cut is the tether which is also cut above the Tilt Lock Ad-juster. The remaining tehter and crotch straps can be used to guide and/or lower the child to safety.

IMMEDIATE EMERGENCY RELEASETo remove child, 2 cuts of strapping are necessary. cut the front StrapS and the crotch Strap.

FOR SCHOOL BUS USE ONLY

E-Z-ON Max Vest


STANDARD STAR Standard STAR Part # STAR1 Provides solutions for Head Start and disability passengers.

Features a five-point restraint with a quick release buckle.

Does not require the use of a lap belt.

Flexible positioning base situates the child in the proper restraint position.

One size fits students from 25 to 65 pounds and up to 57inches tall.

Easy to install on existing high and low back seats.

Compliant with all Federal and Head Start Safety Requirements.

STANDARD STAR WITH CHEST STRAP Standard Star with Chest Strap Part # STAR2 Provides solutions for Head Start and disability passengers.

Features a five-point restraint with a quick release buckle.

Does not require the use of a lap belt.

Flexible positioning base situates the child in the proper restraint position.

One size fits students from 25 to 65 pounds and up to 57inches tall.

The Orange Chest Strap provides additional upper body trunk support

Easy to install on existing high and low back seats.

Compliant with all Federal and Head Start Safety Requirements.

Star Seats



http://ewss.org/product/standard-star.html

http://ewss.org/product/standard-star-with-chest-strap.html

STAR PLUS STAR Plus Part # STAR3 Fits children from 25 to 90 pounds and up to 57 inches tall.

Fits your current high & low back seats.

No lap belts required.

Meets FMVSS requirements.

Compatible with both seat belt-ready and non-seat belt-ready seats.

STAR PLUS WITH CHEST STRAP STAR Plus with Chest Strap Part # STAR4 Fits children from 25 to 90 pounds and up to 57 inches tall.

Fits your current high & low back seats.

No lap belts required.

The Orange Chest Strap provides additional upper body trunk support

Meets FMVSS requirements.

Compatible with both seat belt-ready and non-seat belt-ready seats.

Star Seats



http://ewss.org/product/star-plus.html

http://ewss.org/product/star-plus-with-chest-strap.html

SPECIAL NEEDS STAR Part # STAR5 Support features with the five-point restraint include an abductor, recline wedge, torso

supports and adjustable headrest.

Easily adjusts to provide support for children 20-105 pounds with a torso height up to 20

inches tall.

Meets or exceeds all applicable federal and Head Start safety standards.

Installs on both standard FMVSS 222 and 210 seats.

Fits both Standard and High Back Seats

Seatpad can be removed and washed without removing the seat.

Star Seats



http://ewss.org/product/special-needs-star.html

Documents

BESI Over the Shoulder Harness - american-bus-inc.comamerican-bus-inc.com/wp-content/uploads/2015/11/ABA-vests-harness... · Our Over the Shoulder Harness is designed and tested to