Bluetooth® GPS Watch with Heart Rate Measurement1 25 2 2 1 2 7 7 8 D F H E G KRIPPL-WATCHES WARENHANDELS GMBH MARIA-THERESIA-STR. 41 4600 WELS, AUSTRIA SERIAL NO.: PO7044 MODEL NO.:

Bluetooth® GPS Watch with Heart Rate Measurement

User Manual

Spend a little Live a lot.

ID: #05007

myhansecontro

l.c

om

MA

NU

AL D

EVELOPED IN GER

MA

NY

User-friendlyManual

QR codes take you where you want to go quickly and easily

Whether you require product information, spare parts or accesso-ries, details on warranties or aftersales services, or if you want to watch a product demonstration video, our QR codes will take you there in no time at all.

What is a QR code?

A QR code (QR = Quick Response) is a type of matrix that can be read with a smartphone camera and that contains a link to a website or contact details, for example.

Advantage: You do not need to manually enter a website address or contact details.

This is how it works

To scan the QR code, all you need is a smartphone with QR code rea-der software and an internet connection*. This type of software can be downloaded for free from your app store.

Try it out now

Just scan the QR code with your smartphone and find out more about the Aldi product you have purchased.*

Your Aldi Service Portal

All details mentioned above can also be found in the Aldi Service Portal at www.aldi.co.uk.

* Depending on your tarif plan you may be charged for the connection.

need is a smaet connecti

from your

e QR code withore about th

rix th a link to a

nter a we

Dok./Rev.-N

r. 92989_20

150302 neu

Overview .............................................................................4Use ........................................................................................5Scope of delivery/device parts ..........................................6General information ...........................................................7

Reading and storing the instruction manual ...................7Explanation of symbols .........................................................7Checking the GPS watch and product contents .............. 9

Safety ...................................................................................9Proper use ............................................................................... 9Safety notes ...........................................................................10Water-resistance ...................................................................16

Start-up ............................................................................. 18Charging the battery pack of the GPS watch ..................18Chest strap ............................................................................ 20Bike holder ............................................................................ 22Downloading and installing the Crane Connect app ... 23General information about GPS ........................................ 24

Operation ..........................................................................27Turning the GPS watch on and off .................................... 27Locking keys ......................................................................... 27Illumination of the display panel ...................................... 28GPS watch modes ................................................................ 29System setting mode ..........................................................30Time mode ............................................................................ 37Workout mode with GPS ..................................................... 37Interval mode with GPS ...................................................... 42History mode ........................................................................45Alarm mode ..........................................................................48Data transfer .........................................................................49

Cleaning and maintenance ............................................. 50Changing the transmitter unit’s battery ..........................51

Storage ..............................................................................53Troubleshooting .............................................................. 54Technical data .................................................................. 58

Declaration of conformity ..................................................59Disposal .............................................................................59

Disposing of the packaging ...............................................59Disposing of old devices .....................................................60

Warranty ........................................................................... 61Warranty Card ......................................................................61Warranty conditions ........................................................... 62

Contents

S wa...............

................ the Crane Co

out GPS.......................

ch on and of...................

he displaydes .........

etting modeode ...............ut mode wit mode

de

.............................

............................

A

B C

1

2

3

4

5

6

16

17

20

19

18

15

22

23

21

24

14

13

9

11

10

12

7

8

4 GB IRE

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r V1

V1

V1

V1

V1

V1

V1

2 2 211 25

7

7 8

D

F

H

E

G

KRIPPL-WATCHESWARENHANDELS GMBHMARIA-THERESIA-STR. 414600 WELS, AUSTRIASERIAL NO.: PO7044MODEL NO.: HO5-GPS-6ATYPE: D92J63EAN: 20023898BLUETOOTH ID: D024216PLU: 924123 BAR WATER RESISTANT1 X 3.7 V 24mA

06/2015

36

5GB IRE

Korrektu

r

Korrektu

r

7

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r V1

V17

V1

V1

V1

V1

V1

6 GB IRE

Product contents⁄device parts

1 GPS watch

2 USB connector cable

3 Cleaning brush

4 Bike holder

5 Cable strap for 4

6 Fixing plate for 4

7 Chest strap

8 Transmitter unit

9 ST./STP key (start/stop)

10 VIEW key

11 LAP/RESET key

12 MODE key

13 Display panel

14 LIGHT key (light)

15 Top row

16 GPS icon

17 Heart rate icon

18 Centre row

19 Bottom row

20 Battery charging level icon

21 L icon (lap)

22 Heart rate icon

23 P icon (12 h time format)

24 Workout icon

25 Charging contacts

Korrektu

r

ST./STP key (start/stop)ST./STP key (start/stop)

LAP/RESET keyLAP/RESET key

MODE keyMODE key Korrektu

r

Korrektu

r Heart rate iconHeart rate icon

Korrektu

r 23

Korrektu

r

Korrektu

r

24

Korrektu

r V1

Battery charging level Battery charging level iconicon

L icon (lap)L icon (lap)

AFTER SALES [email protected]

GB

IRE00800/52323000

General information GBIRE

7

General information

Reading and storing the instruction manual

This instruction manual accompanies this Bluetooth® GPS “Watch with Heart Rate Meas-urement”. It contains important information on

start-up and handling.

For improved readability, the Bluetooth® GPS watch with heart rate measurement will be referred to below merely as the “GPS watch” below.

Before using the GPS watch, please read through the instruction manual carefully. This particularly applies for the safety notes. Failure to comply with the instruction manual may result in damage to the GPS watch and falsified workout results.

The instruction manual is based on the standards and rules in force in the European Union. When abroad, you must also observe country-specific guidelines and laws.

Store the instruction manual and packaging for future use. If you pass the GPS watch on to third parties, please be absolutely sure to include this instruction manual.

Korrektu

r Before using the GPS watch, please read through the Before using the GPS watch, please read through the instruction manual carefully. This particularly applies for instruction manual carefully. This particularly applies for the safety notes. Failure to comply with the instruction the safety notes. Failure to comply with the instruction manual may result in damage to the GPS watch and manual may result in damage to the GPS watch and falsified workout results. falsified workout results.

The instruction manual is based on the standards and The instruction manual is based on the standards and rules in force in the European Union. When abroad, you rules in force in the European Union. When abroad, you must also observe country-specific guidelines and laws.must also observe country-specific guidelines and laws.

Store the instruction manual and packaging for future Store the instruction manual and packaging for future use. If you pass the GPS watch on to third parties, please use. If you pass the GPS watch on to third parties, please

V1

For improved readability, the Bluetooth® GPS watch with For improved readability, the Bluetooth® GPS watch with heart rate measurement will be referred to below merely heart rate measurement will be referred to below merely


IRE00800/52323000

IRE General informationGB

8

Explanation of symbolsThe following symbols and signal words are used in this instruction manual, on the GPS watch or on the packaging.

WARNING!

WARNING! This signal word designates a hazard with moderate degree of risk which may lead to death or severe injury if not avoided.

CAUTION!

CAUTION! This signal word designates a hazard with low risk that, if not avoided, may result in minor or moderate injury.

NOTICE!

NOTICE! This signal word warns against potential damages to property.

This symbol provides you with useful supplementary information on assembly or operation.

Declaration of conformity (see chapter “Declaration of conformity”): Products marked with this symbol fulfil the require-ments of the EC directives.

Korrektu

r This signal word designates a hazard with low risk This signal word designates a hazard with low risk

that, if not avoided, may result in minor or moderate injury.that, if not avoided, may result in minor or moderate injury.

Korrektu

r

This signal word warns against potential This signal word warns against potential damages to property.damages to property.

This symbol provides you with useful This symbol provides you with useful

V1

This signal word designates a hazard with This signal word designates a hazard with moderate degree of risk which may lead to death or moderate degree of risk which may lead to death or


GB

IRE00800/52323000

Safety GBIRE

9

Checking the GPS watch and product contents

1. Carefully take the GPS watch and its accessories out of the packaging.

2. Remove the packaging material and all protective wrapping.

3. Check to make sure that the delivery is complete (see fig. A).

4. Check whether the GPS watch or the individual parts exhibit damages. If this is the case, do not use the GPS watch. Contact the manufacturer via the service address indicated on the warranty card.

Safety

Proper useThe GPS watch has a navigation system. The US “GPS” satellite network orbiting the earth can be used to determine the position of the user. This can be done any time and anywhere in the world when outdoors.

The GPS watch primarily serves to measure distance, speed and altitude and is particularly suitable for sports like running, cycling, hiking, sailing, skiing etc.

However, the GPS watch is not suitable for demanding applications such as paragliding, skydiving or gliding.

The GPS watch is designed for private use and is not suitable for commercial use.

Check whether the GPS watch or the individual partsexhibit damages. If this is the case, do not use the exhibit damages. If this is the case, do not use the GPS watch. Contact the manufacturer via the service GPS watch. Contact the manufacturer via the service address indicated on the warranty card.address indicated on the warranty card.

Proper useThe GPS watch has a navigation system. The US “GPS” The GPS watch has a navigation system. The US “GPS” satellite network orbiting the earth can be used to satellite network orbiting the earth can be used to determine the position of the user. This can be done any determine the position of the user. This can be done any time and anywhere in the world when outdoors.time and anywhere in the world when outdoors.

V1

e sure that the delivery is complete e sure that the delivery is complete

Check whether the GPS watch or the individual partsCheck whether the GPS watch or the individual partsexhibit damages. If this is the case, do not use the exhibit damages. If this is the case, do not use the


IRE00800/52323000

IRE SafetyGB

10

The GPS watch can also be used as a workout aid for measuring and displaying your heart rate. The GPS watch is not a medical device.

Only use the GPS watch as described in this instruction manual. Any other use is considered improper and may result in damage to property.

The manufacturer or vendor accepts no liability for damage caused by improper or incorrect use.

Safety notes

WARNING!

Risk of accident/injury!

Do not use the GPS watch when you are driv-ing a vehicle. Looking away from the road is dangerous and may cause an accident; you or other persons could be injured as a result. − Stop or let a passenger perform the settings.K

orrektu

r Risk of accident/injury!Risk of accident/injury!

Do not use the GPS watch when you are drivDo not use the GPS watch when you are driving a vehicle. Looking away from the road is ing a vehicle. Looking away from the road is dangerous and may cause an accident; you dangerous and may cause an accident; you or other persons could be injured as a result.or other persons could be injured as a result.− Stop or let a passenger perform the − Stop or let a passenger perform the

settings.settings.

V1


GB

IRE00800/52323000

Safety GBIRE

11

WARNING!

Health hazard!

The GPS watch is not a medical device; it is a workout aid for measuring and displaying your heart rate. − Always consult a physician before you start a regular workout routine. − Persons with pacemakers may only use devices for measuring heart rate in consultation with their physician. − Do not use the chest strap if you are allergic to latex. The chest strap may contain latex constituents and cause irritation and reddening of your skin. − Batteries may pose a risk to health if ingested. You should therefore store the battery and the chest strap so that they are not accessible for small children. If a battery has been swallowed, you must seek immediate medical attention.

Korrektu

r devices for measuring heart rate in devices for measuring heart rate in consultation with their physician.consultation with their physician.

− Do not use the chest strap if you ar− Do not use the chest strap if you arallergic to latex. The chest strap may allergic to latex. The chest strap may contain latex constituents and cause contain latex constituents and cause irritation and reddening of your skin.irritation and reddening of your skin.

− Batteries may pose a risk t− Batteries may pose a risk tingested. You should therefore store the ingested. You should therefore store the battery and the chest strap so that they battery and the chest strap so that they are not accessible for small children. If a are not accessible for small children. If a

V1

− Always consult a physician before you − Always consult a physician before you art a regular workout routine. art a regular workout routine.

ers may only use ers may only use devices for measuring heart rate in devices for measuring heart rate in


IRE00800/52323000

IRE SafetyGB

12

− Promptly remove an empty battery from the chest strap. Otherwise it could leak. In this case, avoid contact with skin, eyes or mucus membranes. In the event of contact with battery acid, immediately flush the applicable areas with plenty of clean water and consult a physician promptly.

WARNING!

Danger for children and persons with impaired physical, sensory or mental capacities (e.g. partially disabled persons, older persons with reduced physical and mental capacities) or lack of experience and knowledge (e.g. older children). − The GPS watch may be used by children ages eight and over as well as persons with impaired physical, sensory or mental capacities or those lacking expe-rience and knowledge if they are super-vised or have been instructed in how to safely use the GPS watch and have understood the risks associated with using it.

Korrektu

r Danger for children and persons with Danger for children and persons with impaired physical, sensory or mental impaired physical, sensory or mental capacities (e.g. partially disabled persons, capacities (e.g. partially disabled persons, older persons with reduced physical and older persons with reduced physical and mental capacities) or lack of experience mental capacities) or lack of experience and knowledge (e.g. older children).and knowledge (e.g. older children).− The GPS watch may be used by childr− The GPS watch may be used by childr

ages eight and over as well as persons ages eight and over as well as persons with impaired physical, sensory or with impaired physical, sensory or

V1


GB

IRE00800/52323000

Safety GBIRE

13

− Children may not play with the GPS watch. Cleaning and user maintenance must not be performed by unsupervised children. − Keep children under the age of eight away from the GPS watch and the acces-sories. − Do not allow children to play with the packaging wrapper. They could swallow it and suffocate.

WARNING!

Risk of explosion and fire!Lithium battery packs and batteries could explode if handled improperly. − Your GPS watch is operated with a lithium polymer battery pack, which you cannot replace. − You may not heat, open or short circuit battery packs and batteries or dispose of them in fire. Do not drill through the GPS watch. − To avoid overheating the battery pack, do not expose the GPS watch to direct sunlight or other heat sources, e.g. in a vehicle.

Korrektu

r Risk of explosion and fire!Risk of explosion and fire!Lithium battery packs and batteries could Lithium battery packs and batteries could explode if handled improperly.explode if handled improperly.

Your GPS watYour GPS watch is operated with a lithium ch is operated with a lithium polymer battery pack, which you cannot polymer battery pack, which you cannot replace. replace.

− You may not heat− You may not heat

V1

o play with the o play with the packaging wrapper. They could swallow packaging wrapper. They could swallow


IRE00800/52323000

IRE SafetyGB

14

− Only use the enclosed charging cable and a USB port on your PC or a USB charger to charge the battery pack in the GPS watch. − Never charge the battery pack at tem-peratures below +10 °C! This will dam-age the chemical composition of the cell and may result in a fire. − Only replace the battery for the chest strap transmitter unit with an equiva-lent battery type (CR2032). − Do not attempt to charge the battery or reactivate it with other means.

NOTICE!

Risk of damage!

Improper handling of the GPS watch may damage the GPS watch. − Do not place any objects on the GPS watch and do not apply pressure to the display panel. Otherwise the display panel could break. − Avoid contact between the display pan-el and angular objects.

Korrektu

r strap transmitter unit with an equiva-lent battery type (CR2032).lent battery type (CR2032).

o charge the battery or o charge the battery or reactivate it with other means.reactivate it with other means.

Korrektu

r

Risk of damage!Risk of damage!

Improper handling of the GPS watch may Improper handling of the GPS watch may damage the GPS watch.damage the GPS watch.− Do not place any objects on the GPS − Do not place any objects on the GPS

V1ery for the chest ery for the chest

strap transmitter unit with an equiva-strap transmitter unit with an equiva-


GB

IRE00800/52323000

Safety GBIRE

15

− Avoid very strong magnetic fields (e.g. transformers). Otherwise, they could cause inconsistencies in meas-uring time and positioning. Failure to observe these notes may result in faults or damage to your GPS watch. − For optimal battery pack power, avoid deep discharges. Charge the battery pack when only one bar is visible on the battery pack indicator. − Do not overcharge the battery pack. Connecting a charged or partially charged battery pack several times may overcharge it and damage the cells. − Do not leave the battery pack connected to the charger for several days. − Never open the housing of the GPS watch or chest strap, it does not contain any parts requiring maintenance (only the battery must be changed; see section “Changing the battery”). − Only parts that comply with the original device data may be used for repairs. Electrical and mechanical parts, which are essential for providing protection against sources of danger, are located in this device.

Korrektu

r ge the battery pack. ge the battery pack.

Connecting a charged or partially Connecting a charged or partially charged battery pack several times may charged battery pack several times may overcharge it and damage the cells.overcharge it and damage the cells.

− Do not leave the battery pack connect− Do not leave the battery pack connectto the charger for several days.to the charger for several days.Never open the housing of the GPS Never open the housing of the GPS watch or chest strwatch or chest strany parts requiring maintenance (only any parts requiring maintenance (only the battery must be changed; see section the battery must be changed; see section

V1

deep discharges. Charge the battery deep discharges. Charge the battery pack when only one bar is visible on the pack when only one bar is visible on the

ge the battery pack. ge the battery pack.


IRE00800/52323000

IRE SafetyGB

16

− Liability and warranty claims are waived in the event of repairs performed by the user, improper connection of the device or incorrect operation.

Water-resistanceThe GPS watch is water-resistant up to 3 bar; the chest strap is splash-proof.

Refer to the table below to determine the level of water-resistance for your GPS watch and appropriate use. The bar value refers to air overpressure that was applied to test water-resistance (DIN 8310).

Water resistant up to

Rain, splashes

Washing hands

Shower-ing

Bathing, swim-ming

Water sports

n/a1 Yes No No No No

3 bar1 Yes Yes No No No

1) The watch withstands a pressure of 3 bar for a limited amount of time.

Korrektu

r

Korrektu

r

Korrektu

r use. The bar value refers to air overpressure that was use. The bar value refers to air overpressure that was applied to test water-resistance (DIN 8310).applied to test water-resistance (DIN 8310).

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r Shower-Showering

Korrektu

r

Korrektu

r

YesYes No No No NoNo No No No

Yes YesYes Yes

V1

Refer to the table below to determine the level of Refer to the table below to determine the level of water-resistance for your GPS watch and appropriate water-resistance for your GPS watch and appropriate use. The bar value refers to air overpressure that was use. The bar value refers to air overpressure that was


GB

IRE00800/52323000

Safety GBIRE

17

NOTICE!

Risk of damage!

− Do not immerse the GPS watch or the transmitter in water or other liquids. − Do not press the keys when the GPS watch is wet. Otherwise, water could penetrate the housing and damage the clockwork. − Keep in mind that salt and thermal water may cause metal parts to corrode. − It is recommended that you do not wear the watch in a sauna or in the shower as differences in temperature may cause condensation to form, which could damage the clockwork. − Peak pressures may occur when swim-ming or when exposed to a water jet (e.g. when showering or washing your hands). During such activities, affected areas may be subjected to a significantly greater pressure than expected for the immersion depth. Only watches with a classification of 5 bar or more can be con-sidered water-proof (showering allowed).

Korrektu

r Keep in mind that salt and thermal waterKeep in mind that salt and thermal watermay cause metal parts to corrode.may cause metal parts to corrode.

− It is recommended that you do not wear − It is recommended that you do not wear ch in a sauna or in the shower as ch in a sauna or in the shower as

differences in temperature may cause differences in temperature may cause condensation to form, which could condensation to form, which could damage the clockwork.damage the clockwork.Peak prPeak pressures may occur when swimessures may occur when swimming or when exposed to a water jet ming or when exposed to a water jet (e.g. when showering or washing your (e.g. when showering or washing your

V1

watch is wet. Otherwise, water could watch is wet. Otherwise, water could penetrate the housing and damage the penetrate the housing and damage the

Keep in mind that salt and thermal waterKeep in mind that salt and thermal water


IRE00800/52323000

IRE Start-upGB

18

Watches with a classification of 10 bar can also be used when swimming. − If a watch is subjected to substantial changes in temperature such as when sun-bathing followed by a dip in cool water, liquid may condense in the hous-ing. This is not necessarily a sign that it is not water proof; it is, however, imperative that the moisture is removed. Contact our customer service team in such cases.

Start-up

Charging the battery pack of the GPS watchThe GPS watch has an integrated lithium polymer battery pack. Fully charge the GPS watch before first use (approx. 3 hours).

1. If necessary and to avoid corrosion, dry the contact points 25 of the GPS watch thoroughly before starting the charge process.

2. Secure the clip on the USB cable 2 on the GPS watch 1 (see fig. D).

NOTICE!

Risk of damage!

Korrektu

r customer service team in such cases.

Charging the battery pack of the GPS watchCharging the battery pack of the GPS watchThe GPS watch has an integrated lithium polymer The GPS watch has an integrated lithium polymer battery pack. Fully charge the GPS watch before first use battery pack. Fully charge the GPS watch before first use (approx. 3 hours).(approx. 3 hours).

If necessary and to avoid corrIf necessary and to avoid corr of the GPS watch thoroughly before of the GPS watch thoroughly before

V1

not water proof; it is, however, imperative not water proof; it is, however, imperative that the moisture is removed. Contact our that the moisture is removed. Contact our customer service team in such cases.customer service team in such cases.


GB

IRE00800/52323000

Start-up GBIRE

19

Incorrectly connecting the cable may cause the watch or cable to heat up. − Make sure that the USB cable is connected so that the metal pins on the clip lock directly into the contact points of the watch.

3. Connect the USB cable with a USB charger or a USB port on your computer carrying power. There is no need to install a driver for charging the battery pack.

If the GPS watch has been switched off, it automatically switches on when charging.

The icon of a charging battery appears on the display panel 13 during the charging process.

If the battery pack is fully charged, the “FULL” indicator will appear.

4. Pull the USB plug out of the USB charger or PC.

5. Carefully take the clip for the USB cable off of the GPS watch.

Korrektu

r If the GPS watch has been switched off, it automatically switches on when charging.

The icon of a charging battery appears on the display The icon of a charging battery appears on the display during the charging process. during the charging process.

If the battery pack is fully charged, the “FULL” indicator If the battery pack is fully charged, the “FULL” indicator

Pull the USB plug out of the USB charger or PC.Pull the USB plug out of the USB charger or PC.

Carefully tCarefully take the clip for the USB cable off of the GPS ake the clip for the USB cable off of the GPS watch.watch.

V1

port on your computer carrying power. There is no port on your computer carrying power. There is no need to install a driver for charging the battery pack.need to install a driver for charging the battery pack.

If the GPS watch has been switched off, it automatically If the GPS watch has been switched off, it automatically


IRE00800/52323000

IRE Start-upGB

20

Battery pack charging levelOne battery pack charge is sufficient for max. 16 hours of operation in workout mode with GPS and approx. one year in watch mode.

The battery pack charging level is indicated with four bars in the icon 20 on the display panel 13 .

− If only one bar is visible, you should charge the watch as soon as possible.

Chest strapThe elastic chest strap with the transmitter unit is for meas-uring the heart rate. The transmitter unit records heart beats via the gummed area of the chest strap and transmits the pulses to the GPS watch via Bluetooth®. Therefore, you must establish a Bluetooth® connection between the GPS watch and the transmitter unit (“Pairing”) after putting on the chest strap. By factory default, the watch is paired with the chest strap. Normally, re-pairing is only required after changing the batteries of the chest strap of after changing the chest strap.

The battery is already inserted in the chest strap upon delivery; it is operational. The section “Changing the battery of the transmitter unit” explains how to change the transmitter unit’s battery.

The transmitter unit becomes active when you put the chest strap on and switches off when you take the chest strap or transmitter unit off.

Korrektu

r with the transmitter unit is for meas

uring the heart rate. The transmitter unit records heart uring the heart rate. The transmitter unit records heart beats via the gummed area of the chest strbeats via the gummed area of the chest strap and transmits ap and transmits the pulses to the GPS watch via Bluetooth®. Therefore, you the pulses to the GPS watch via Bluetooth®. Therefore, you must establish a Bluetooth® connection between the GPS must establish a Bluetooth® connection between the GPS watch and the transmitter unit (“Pairing”) after putting on watch and the transmitter unit (“Pairing”) after putting on the chest strap. By factory default, the watch is paired with the chest strap. By factory default, the watch is paired with the chest strap. Normally, re-pairing is only required after the chest strap. Normally, re-pairing is only required after changing the batteries of the chest strap of after changing changing the batteries of the chest strap of after changing

chest strap.chest strap.

The battery is already inserted in the chest strap upon The battery is already inserted in the chest strap upon

V1

with the transmitter unit is for measwith the transmitter unit is for measuring the heart rate. The transmitter unit records heart


GB

IRE00800/52323000

Start-up GBIRE

21

To put the chest strap on:

1. To ensure proper contact with the skin, wet the gummed surface of the chest strap 7 with a small amount of warm water or apply a small amount of ECG gel (available in special medical stores) (see fig. F).

2. Use the snap fasteners to connect the transmitter unit 8 with the chest strap (see fig. G).

3. Adjust the chest strap so that it is fitted firmly on the chest under the pectoral muscles and the transmitter unit is the right way around (see fig. H).

4. Switch the GPS watch to workout mode and have it display your heart rate (see section “Workout mode with GPS”). The heart beat icon 17 or 22 or in the top row 15 will start flashing and your heart rate will be displayed after a short time. If this is not the case, refer to the chapter “Troubleshooting”.

Korrektu

r unit is the right way around (see

Switch the GPS watch to workout mode and have it Switch the GPS watch to workout mode and have it ate (see section “Workout mode ate (see section “Workout mode

with GPS”). The heart beat icon with GPS”). The heart beat icon will start flashing and your heart rate will start flashing and your heart rate

will be displayed after a short time.will be displayed after a short time.If this is not the case, refer to the chapter If this is not the case, refer to the chapter “Troubleshooting”.“Troubleshooting”.

V1

Adjust the chest strap so that it is fittAdjust the chest strap so that it is fitted firmly on the ed firmly on the chest under the pectoral muscles and the chest under the pectoral muscles and the transmitter transmitter

fig. Hfig. H).).

Switch the GPS watch to workout mode and have it


IRE00800/52323000

IRE Start-upGB

22

Bike holderThe GPS watch can be worn like a wristwatch or be mounted on the handlebar of your bike with the enclosed holder:

1. Mount the bike holder 4 on the handlebar of your bike.

2. Use the enclosed insertion plate 6 if the bike holder is too loose.

3. You can use cable straps 5 to permanently mount

the bike holder:

4. Mount the GPS watch on the bike holder.

4

5

Mount the GPS watchMount the GPS watchKorrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1


GB

IRE00800/52323000

Start-up GBIRE

23

Downloading and installing the Crane Connect appYou can use the GPS watch with your smartphone (Android or iOS). For this, you will need the free Crane Connect App:

The app works with iPhone 4s and higher, iPads from the 3rd generation and higher, Bluetooth® Smart Ready smartphones and tablets with Android 4.3 as well as more recent versions. Bluetooth® 4.0 must be supported. You can find a compatibility list on www.cranesportsconnect.com/kompatibilitaet.

− Download the free Crane Connect app from the App Store, from the Google Play Store or via the following QR code:

QR code for Android: QR code for iOS:

− Install the Crane Connect app on your smartphone.

NOTICE!

Follow the instructions on your smartphone for this.

Korrektu

r www.cranesportsconnect.com/kompatibilitaet.

ane Connect app from the App ane Connect app from the App Store, from the Google Play Store or via the following Store, from the Google Play Store or via the following

QR code for Android: QR code for iOS:QR code for Android: QR code for iOS:

V1

smartphones and tablets with Android 4.3 as well as smartphones and tablets with Android 4.3 as well as more recent versions. Bluetooth® 4.0 must be supported. more recent versions. Bluetooth® 4.0 must be supported.

www.cranesportsconnect.com/kompatibilitaet.www.cranesportsconnect.com/kompatibilitaet.

ane Connect app from the App


IRE00800/52323000

IRE Start-upGB

24

General information about GPSThe global positioning system (GPS) uses a network of US satellites to measure distance, speed and altitude. The United States of America operates this network of satellites and is also responsible for its accuracy and maintenance.

Proper reception of satellite signals is only possible in clear weather (clear skies) and suitable reception area – an open area with an unobstructed view of the sky.

Poor weather (e.g. heavy snowfall) and a disrupted re-ception area (GPS watch is covered by clothing or other objects, high rises, narrow valleys and gullies inhibit reception) can significantly affect the performance and accuracy of the GPS watch.

GPS reception is significantly restricted in buildings: Under certain circumstances, it may be possible to determine one’s position in the vicinity of windows with an unobstructed view of the sky; however, it is not possible to receive GPS signals in other indoor areas and in basements.

If the GPS watch is not able to receive a signal, it will switch GPS off after 30 minutes to save battery power.

Korrektu

r ception area (GPS watch is covered by clothing or other objects, high rises, narrow valleys and gullies inhibit objects, high rises, narrow valleys and gullies inhibit reception) can significantly affect the performance and reception) can significantly affect the performance and

GPS reception is significantly restricted in buildings: GPS reception is significantly restricted in buildings: Under certain circumstances, it may be possible to Under certain circumstances, it may be possible to determine one’s position in the vicinity of windows with determine one’s position in the vicinity of windows with an unobstructed view of the sky; however, it is not an unobstructed view of the sky; however, it is not possible to receive GPS signals in other indoor areas and possible to receive GPS signals in other indoor areas and in basements.in basements.

If the GPS watch is not able to receive a signal, it will If the GPS watch is not able to receive a signal, it will

V1

open area with an unobstructed view of the sky.open area with an unobstructed view of the sky.

Poor weather (e.g. heavy snowfall) and a disrupted rePoor weather (e.g. heavy snowfall) and a disrupted reception area (GPS watch is covered by clothing or other ception area (GPS watch is covered by clothing or other objects, high rises, narrow valleys and gullies inhibit


GB

IRE00800/52323000

Start-up GBIRE

25

Accuracy of GPSThe GPS watch is accurate to 3 metres CEP (50 %) outdoors. The specification of accuracy refers to so-called 50 % CEP (circular error probability). This means that with excellent satellite reception, 50 % of all measurements are located within a circle with the specified radius of 3 m. However, this also means that half of the measurement points are outside of this radius.

But 95 % of all measurement points are located within a circle with twice the specified radius. With excellent satellite reception, nearly all points are located within a circle with a radius of 6 m.

95 %

of all

measuring

points

50 % of

all

measu

ring p

oints

3 m

6 mKorrektu

r satellite reception, nearly all points are located within a satellite reception, nearly all points are located within a

Korrektu

r

Korrektu

r

Korrektu

r

95 %

of all

measuring

points

V1But 95 % of all measurement points are located within But 95 % of all measurement points are located within

a circle with twice the specified radius. With excellent a circle with twice the specified radius. With excellent satellite reception, nearly all points are located within a satellite reception, nearly all points are located within a


IRE00800/52323000

IRE Start-upGB

26

Finding satellitesIn ideal conditions during a cold start, finding satellites may take up to a few minutes or only a few seconds with a warm start.

A cold start is at hand when you use the GPS watch for the first time, haven’t used it for a prolonged period or have covered a considerable distance since the last time your position was determined (e.g. 300 km). In this case, the GPS watch must retrieve the satellite constellations again.

A warm start is possible when the GPS watch has not covered a large distance since the last time the position was determined and providing a considerable amount of time has not passed. The more satellites have moved out of the periphery of the GPS watch since the last positioning, the longer it will take to find satellites.

For fast GPS reception, it is important that the watch must be in an idle position and motionless.

Tip: Before you start your workout, set your GPS watch down in open terrain with an unobstructed view of the sky (e.g. on a window ledge or car roof) and activate workout or interval mode (see sections “Workout mode” and “Interval mode”) so that the GPS watch starts looking for satellites.

The GPS icon 16 flashes while searching. As soon as enough satellites are received, the icon will be illuminated continuously.

Korrektu

r A warm start is possible when the GPS watch has not covered a large distance since the last time the position covered a large distance since the last time the position was determined and providing a considerable amount was determined and providing a considerable amount of time has not passed. The more satellites have moved of time has not passed. The more satellites have moved out of the periphery of the GPS watch since the last out of the periphery of the GPS watch since the last positioning, the longer it will take to find satellites. positioning, the longer it will take to find satellites.

For fast GPS reception, it is important that the watch For fast GPS reception, it is important that the watch must be in an idle position and motionless.must be in an idle position and motionless.

TipTip: Before you start your workout, set your : Before you start your workout, set your GPS watch down in open terrain with an GPS watch down in open terrain with an unobstructed view of the sky (e.g. on a window unobstructed view of the sky (e.g. on a window

V1

In this case, the GPS watch must retrieve the satellite In this case, the GPS watch must retrieve the satellite

A warm start is possible when the GPS watch has not A warm start is possible when the GPS watch has not covered a large distance since the last time the position


GB

IRE00800/52323000

Operation GBIRE

27

Operation

Turning the GPS watch on and offThe watch is shipped in a deactivated state. The GPS watch will turn on when the battery pack is being charged.

ActivationPress and hold the LAP/RESET key 11 for approx. 5 seconds to activate the GPS watch. The time will appear on the display panel 13 .

DeactivationTo conserve battery power, you can switch the GPS watch off when not in use:

1. Switch to time mode (see section “Time mode”).

2. Press and hold the LAP/RESET key 11 for approx. 5 seconds.

As soon as the display panel 13 goes out, the GPS watch has switched off.

Locking keysYou can lock the key functions to protect against unwanted use:

− Tap the VIEW 10 and MODE keys 12 simultaneously. A key icon and the message “ON” will appear briefly on the display panel. The keys are now locked.

Korrektu

r To conserve battery power, you can switch the GPS To conserve battery power, you can switch the GPS watch off when not in use:watch off when not in use:

o time mode (see section “Time mode”).o time mode (see section “Time mode”).

Press and hold the LAP/RESETPress and hold the LAP/RESET5 seconds.

As soon as the display panel As soon as the display panel watch has switched off.watch has switched off.

Locking keysLocking keys

V1

for approx. for approx. 5 seconds to activate the GPS watch. The time will 5 seconds to activate the GPS watch. The time will


IRE00800/52323000

IRE OperationGB

28

− To unlock them, tap the VIEW and MODE keys again simultaneously. A key icon and the message “OFF” will briefly appear on the display panel. The keys have now been unlocked.

Illumination of the display panel − Tap the LIGHT 14 key to illuminate the display panel for approx. 3 seconds.

Night modeIt is also possible to continuously illuminate the display panel:

− Press and hold the LIGHT key 14 for approx. 3 seconds. This will activate night mode so that the display panel is continuously illuminated. If the GPS watch is not receiving a GPS signal, night mode will automatically deactivate after approx. 5 minutes.

NOTICE!

The light consumes a considerable amount of energy, which depletes the battery pack more quickly.

− Tap the LIGHT key to deactivate night mode. The display light will go out after approx. 3 seconds.

Korrektu

r It is also possible to continuously illuminate the It is also possible to continuously illuminate the

key key

Korrektu

r 14 for approx. for approx.

This will activate night mode so that the display This will activate night mode so that the display panel is continuously illuminated. panel is continuously illuminated. If the GPS watch is not receiving a GPS signal, night If the GPS watch is not receiving a GPS signal, night mode will automatically deactivate after approx. mode will automatically deactivate after approx. 5 minutes.5 minutes.

NOTICE!NOTICE!

V1

It is also possible to continuously illuminate the It is also possible to continuously illuminate the


GB

IRE00800/52323000

Operation GBIRE

29

GPS watch modesThe GPS watch has the following main modes, which will be described in greater detail in the following sections.

• System setting mode Configure basic settings.

• Time mode Displays the current and 2nd time.

• Workout mode with GPS Perform sport with automatic measurement of distance and heart frequency.

• Interval mode with GPS Perform different sports one after another.

• History mode Access the workout summary.

• Alarm mode View and configure alarm time.

By tapping the MODE key 12 , you access the modes one after another except for the setting mode which is described below.

Perform different sports one after another.Perform different sports one after another.

out summary.out summary.

View and configurView and configure alarm time.e alarm time.

By tapping the MODE key By tapping the MODE key one after another except for the setting mode which is one after another except for the setting mode which is described below.described below.

V1

Perform sport with automatic measurement of Perform sport with automatic measurement of


IRE00800/52323000

IRE OperationGB

30

System setting modeIn setting mode, you define the basic settings for the GPS watch such as language, time and display panel contrast.

To access the setting mode:

1. Access the time mode: To do so, tap the MODE key 12 several times until the word “CLOCK” appears on the top row 15 and the time appears a short time later.

2. Press and hold the MODE key 12 for approx. two seconds. The first item in setting mode (“PAIR”) will appear.

The following keys are active in setting mode:

− ST./STP 9 – Increase the value, change selection (e.g. yes/no or units, etc.), start functions.

− LAP/RESET 11 – Reduce value, change selection.

− VIEW 10 – Skip to the next menu item.

− MODE 12 – Leave menu, back to time mode.

Any changes made to values take effect immediately.

You can make the following settings:

Korrektu

r The first item in setting mode The first item in setting mode

The following keys are active in setting mode:The following keys are active in setting mode:

Korrektu

r

– Increase the value, change selection – Increase the value, change selection (e.g. yes/no or units, etc.), start functions.(e.g. yes/no or units, etc.), start functions.

LAP/RESET LAP/RESET Korrektu

r

11

– Skip to the next menu item. – Skip to the next menu item.

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1


GB

IRE00800/52323000

Operation GBIRE

31

PAIR ? StrapThis function establishes a Bluetooth® connection between the chest strap transmitter unit and the GPS watch.

1. Put on the chest strap (see section “Chest strap”).

2. Access the menu item “PAIR ? Strap”.

3. Tap the ST./STP key 9 . The message “PAIRING” will appear; the connection will be established.

− After a short time, the message “DONE!” will appear and the Bluetooth® connection will be established.

− If the message “FAIL!” appears, check to make sure that the chest strap is properly fitted and start from the beginning.

PAIR ? APPThis function establishes a Bluetooth® connection between the GPS watch and the Crane Connect app on your smartphone (see section “Downloading and installing the Crane Connect app”).

1. Activate Bluetooth® on your smartphone.

2. Start the Crane Connect app on your smartphone.

3. In the app, select the icon for the GPS watch in the “ All settings” menu. The “Settings” menu will appear.

Korrektu

r The message “PAIRING” will appear; The message “PAIRING” will appear; the connection will be established.the connection will be established.

er a short time, the message “DONE!” will appear er a short time, the message “DONE!” will appear and the Bluetooth® connection will be established.and the Bluetooth® connection will be established.

If the message “FAIL!” appears, check tIf the message “FAIL!” appears, check tthat the chest strap is properly fitted and start from that the chest strap is properly fitted and start from the beginning.the beginning.

PAIR ? APPPAIR ? APPThis function establishes a Bluetooth® connection This function establishes a Bluetooth® connection between the GPS watch and the Crane Connect app on between the GPS watch and the Crane Connect app on

V1

The message “PAIRING” will appear; The message “PAIRING” will appear; V1


IRE00800/52323000

IRE OperationGB

32

4. Tap the option “Connect” in the “Pairing” field.

5. On the GPS watch, access the menu item “PAIR ? APP”.

6. Tap the ST./STP key 9 . The message “PAIRING” will appear; the connection will be established.

− After a short time, the message “DONE!” will appear and the Bluetooth® connection will be established.

− If the message “FAIL!” appears, make sure that Bluetooth® is activated on your smartphone and start from the beginning.

GPS SYNCThis function switches automatic syncing of the time via the GPS signal ON or OFF. The GPS system is activated in workout and interval mode. A very accurate time signal automatically adapted to your current time zone is transmitted at the same time.

Summer time (DST)As soon as you have activated the “GPS Sync” function, summer time is switched ON or OFF as a result.

Korrektu

r er a short time, the message “DONE!” will appear er a short time, the message “DONE!” will appear

and the Bluetooth® connection will be established.and the Bluetooth® connection will be established.

If the message “FAIL!” appears, makIf the message “FAIL!” appears, make sure that e sure that Bluetooth® is activated on your smartphone and Bluetooth® is activated on your smartphone and start from the beginning.start from the beginning.

This function switches automatic syncing This function switches automatic syncing of the time via the GPS signal ON or OFF. of the time via the GPS signal ON or OFF. The GPS system is activated in workout The GPS system is activated in workout and interval mode. A very accurate time and interval mode. A very accurate time signal automatically adapted to your signal automatically adapted to your

V1

er a short time, the message “DONE!” will appear er a short time, the message “DONE!” will appear and the Bluetooth® connection will be established.


GB

IRE00800/52323000

Operation GBIRE

33

Setting the time (SECOND)If you have deactivated the “GPS Sync” function, manually set the time by following the steps below:

The time will appear on the display panel and the word “SECOND” will appear on the top row 15 . The seconds indicator will flash.

1. To reset the seconds to zero, tap the ST./STP key 9 . Then wait e.g. for the time signal from a radio station.

2. Tap the VIEW key 10 . The word “MINUTE” will appear on the top row and the minute indicator will flash.

3. Use the ST./STP 9 and LAP/RESET 11 keys to set the minutes.

4. Repeat steps 2 and 3 to set the hours, year, month and day.

Time format (FORMAT)You can switch the time displayed between 12 hours (“AM/PM”) or 24 hours.

− Tap the ST./STP key 9 to switch the time format.

Korrektu

r

Korrektu

r

Korrektu

r The word “MINUTE” will appear on the top row The word “MINUTE” will appear on the top row and the minute indicator will flash.and the minute indicator will flash.

Korrektu

r

and and and keys to set the minutes. keys to set the minutes.

Repeat steps 2 and 3 tRepeat steps 2 and 3 tyear, month and day.year, month and day.

Time format (FORMAT)Time format (FORMAT)You can switch the time displayed You can switch the time displayed

V1Then wait e.g. for the time signal Then wait e.g. for the time signal


IRE00800/52323000

IRE OperationGB

34

2nd Time (T2)This function sets the number of hours the 2nd time should differ from the current time.

UNITSThis function determines the units of measure in which values will be displayed:

• MET – metric in metres (m, km, km/h) and grams (kg).

• IMP – imperial with foot (ft), miles (m, m/h) and British pound (lb).

• NAU – nautical with sea miles (nm), knots (kt) and British pounds (lb).

Automatic lap (AUTO LAP)In workout mode, the laps covered can be counted and recorded in lap times. Mark the beginning of each lap by tapping the LAP/RESET key 11 .

With the “AUTO LAP” function, laps can automatically be generated according to the distance covered.

1. Set the desired distance after which a new lap will be marked (e.g. 1 km). Possible values: 0.1 to 5.0 km/m/nm.

2. Tap the VIEW key 10 .

Korrektu

r miles (m, m/h) and British pound (lb). miles (m, m/h) and British pound (lb).

– nautical with sea miles (nm), – nautical with sea miles (nm), knots (kt) and British pounds (lb).knots (kt) and British pounds (lb).

Automatic lap (AUTO LAP)Automatic lap (AUTO LAP)In workout mode, the laps covered In workout mode, the laps covered can be counted and recorded in lap can be counted and recorded in lap times. Mark the beginning of each lap times. Mark the beginning of each lap by tapping the LAP/RESET key by tapping the LAP/RESET key

V1

V1


GB

IRE00800/52323000

Operation GBIRE

35

3. Set to “ON” to activate the “AUTO LAP” function.

When “AUTO LAP” is activated, you can still manually record additional lap times at any time with the LAP/RESET key 11 .

Automatic indicator charge (SCROLL)In workout mode, you can switch the values displayed with the VIEW key 10 . The function “SCROLL” will automatically change the indicator every 5 seconds. Here you can switch the automatic indicator change function ON or OFF.

HR ZONEYou can set the upper and lower heart rate limit at which the GPS watch emits a warning tone when exceeded or fallen below.

1. Set the upper limit in the centre row.


3. Set the lower limit in the bottom row.


5. Switch the warning tone ON or OFF in the bottom row.

Gender (GENDER)Set your gender here: “M” for male, “F” for female.

This value and the weight are needed to calculate the calories burned.

Korrektu

r indicator change function ON or OFF.indicator change function ON or OFF.

You can set the upper and lower heart You can set the upper and lower heart rate limit at which the GPS watch emits rate limit at which the GPS watch emits a warning tone when exceeded or fallen a warning tone when exceeded or fallen

Set the upper limit in the centre rSet the upper limit in the centre r

Tap the Tap the VIEW key VIEW key

Set the lower limit in the bottom rSet the lower limit in the bottom r

Tap the Tap the

V1change the indicator every 5 seconds.

indicator change function ON or OFF. V1


IRE00800/52323000

IRE OperationGB

36

WEIGHTSet your weight here.

KEY TONEYou can activate key sounds and acoustic signals when changing activities in interval mode (“ON”) or you can deactivate them (“OFF”).

CONTRASTYou can set the LCD contrast from 1 (bright) to 16 (dark) to optimise the readability of the display panel for you.

Language (ENGLISH)Here you can configure the language to be displayed on the display panel. Possible selections: “DEUTSCH” and “ENGLISH”.

RESETDuring a reset, all values are reset to the basic settings and all data (workout protocols etc.) are deleted.

− Select “YES” to perform a reset.

− Select “NO” if you do not want to perform the reset.

Korrektu

r readability of the display panel for you.

Here you can configure the language to Here you can configure the language to be displayed on the display panel. Possible selections: be displayed on the display panel. Possible selections:

NGLISH”.

During a reset, all values are reset During a reset, all values are reset to the basic settings and all data to the basic settings and all data (workout protocols etc.) are deleted.(workout protocols etc.) are deleted.

− Select “YES” t− Select “YES” to perform a reset.

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1


GB

IRE00800/52323000

Operation GBIRE

37

Time modeIn time mode, you see the current time and date. The GPS function is deactivated in order to save power; a battery pack charge lasts for approx. one year.

To access the time mode:

− If necessary, tap the MODE key 12 several times until the word “CLOCK” appears in the top row 15 and the time appears a short time later.

− Press the VIEW key 10 to switch between the current time and the 2nd time.

Workout mode with GPSIn workout mode, you can perform a sport and the GPS watch will automatically measure the distance and heart rate. From this data and the values you provided for gender and weight, the GPS watch will also determine the calories burned.

After your workout, the GPS watch will save all relevant data and you can view this data on your GPS watch or transfer it to the Crane Connect app on your smart-phone/tablet for further analysis. If the Internet connection on your smartphone is active, the Crane Connect app will automatically upload all workout data to the website www.cranesportsconnect.com for permanent storage after your workout.

The preprogrammed sports “Running”, “Cycling” and “Hiking” as well as profiles 1 and 2 differ with respect to the values displayed: Whilst cycling, speed is of interest and while hiking, altitude.

Korrektu

r current time and the 2nd time.

Workout mode with GPSWorkout mode with GPSIn workout mode, you can perform a sport and the GPS In workout mode, you can perform a sport and the GPS watch will automatically measure the distance and heart watch will automatically measure the distance and heart rate. From this data and the values you provided for rate. From this data and the values you provided for gender and weight, the GPS watch will also determine gender and weight, the GPS watch will also determine the calories burned.the calories burned.

After your workout, the GPS watch will save all relevant After your workout, the GPS watch will save all relevant data and you can view this data on your GPS watch data and you can view this data on your GPS watch or transfer it to the Crane Connect app on your smartor transfer it to the Crane Connect app on your smartphone/tablet for further analysis. If the Internet connectionphone/tablet for further analysis. If the Internet connection

V1

and the time appears a short time later.and the time appears a short time later.

to switch between the to switch between the


IRE00800/52323000

IRE OperationGB

38

To access the workout mode:

− If applicable, tap the MODE key 12 several times, until the name of one of the preprogrammed sports mentioned above appears on the top row 15 . The GPS watch will look for the GPS signal and the GPS icon 16 will flash. Once a GPS signal is received, the icon will be illuminated continuously. After a moment, the preset indicators for this sport will appear. A total of 6 values can be displayed on 2 pages.

− With the VIEW key 10 , you can switch the indicator between the 1st and 2nd page.

Selecting a sportBefore you start the workout, you can select another sport:

− Press and hold the LAP/RESET key 11 to select a preprogrammed sport. The 5 predefined sports will appear one after another in the top row 15 : RUNNING, CYCLING, HIKING, USER 1, USER 2.

− Once the desired sport is displayed, release the LAP/RESET key.

for this sport will appear. A total of 6 for this sport will appear. A total of 6 values can be displayed on 2 pages.values can be displayed on 2 pages.

, you can switch , you can switch the indicator between the 1st and 2nd the indicator between the 1st and 2nd

Selecting a sportSelecting a sportBefore you start the workout, Before you start the workout, you can select another sport:you can select another sport:

− Press and hold the LAP/RESET− Press and hold the LAP/RESETpreprogrammed sport. preprogrammed sport.

V1

signal is received, the icon will be illuminated signal is received, the icon will be illuminated

After a moment, the preset indicators After a moment, the preset indicators

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1


GB

IRE00800/52323000

Operation GBIRE

39

The following table will show you the preprogrammed indicators:

Sport Indicator 1st page Indicator 2nd page

RUNNING duration, distance, pace

lap time, heart rate, calories

CYCLING speed, distance, duration

average speed, heart rate, calories

HIKING height, distance, duration

time, heart rate, calories

USER 1 distance, pace, duration

lap time, heart rate, lap number

USER 2 heart rate, duration, height

geographic lati-tude, distance, geographic longitude

Configuring an indicatorYou can modify the values to be shown:

− Top row 15 : press and hold the LIGHT key 14 .

− Centre row 18 : press and hold the VIEW key 10 .

− Bottom row 19 : regular the MODE key 12 .

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r heart rate,caloriescalories

durationduration

USER 2 heart rate,USER 2 heart rate,duration,duration,heightheight

V1

V1

heart rate,heart rate,caloriescalories

time,time,heart rate,heart rate,


IRE00800/52323000

IRE OperationGB

40

The following values can be shown in the centre line:

• Distance (0-99.99)

• Duration (format up to 60 minutes = mm:ss.th, 1 hour and over = hh:mm:ss)

• Current heart rate

• Current pace (“CP”)

• Current speed (“km/h”/“MPH”/“kn”)

The following values can be displayed in the top and bottom row:

• Altitude (0-9999m)

• Calories (0-9000)

• Distance (0-99.99)

• Duration (format up to 60 minutes = mm:ss.th, 1 hour and over = hh:mm:ss)

• Current heart rate

• Lap No. (0-99)

• Lap time (format up to 60 minutes = mm:ss.th, 1 hour and over = hh:mm:ss)

• Average pace (“AP”)

• Current pace (“CP”)

• Average speed (“AS”)

• Current speed (“km/h”/“MPH”/“kn”)

• Time

• Geographic latitude (degree of latitude, LAT)

• Geographic longitude (degree of longitude, LON)

Korrektu

r o 60 minutes = mm:ss.th, o 60 minutes = mm:ss.th,

1 hour and over = hh:mm:ss)1 hour and over = hh:mm:ss)

ate

Lap No. (0-99)

Lap time (format up to 60 minutLap time (format up to 60 minut1 hour and over = hh:mm:ss)1 hour and over = hh:mm:ss)

age pace (“AP”)age pace (“AP”)

V1

The following values can be displayed in the top and The following values can be displayed in the top and


GB

IRE00800/52323000

Operation GBIRE

41

Starting⁄stopping the workout − Before starting your workout, wait until the GPS watch is receiving a proper GPS signal and the GPS icon 16 is no longer flashing (also see section “Finding satellites”).

− Press the ST./STP key 9 to start or stop the workout. The workout icon 24 will illuminate. It will go out when you stop your workout.

Taking lap times − During your workout, press the LAP/RESET key 11 to take a lap time. The laps can also be timed automatically (see section “AUTO LAP”). A maximum of 99 lap times are saved for each workout.

After your workoutOnce you have completed your workout, transfer the training data to the memory of the GPS watch:

− Press and hold the LAP/RESET key 11 until the message “SAVED!” appears in the top row 15 .

As a result, you have reset all data for the workout to zero and can start a new workout. The data for the workout you completed will be stored in the memory of the GPS watch. You can view them in the protocol later (see section “History mode”) or transfer them to the Crane Connect app on your smartphone/tablet (see section “Data transfer”).

Korrektu

r , press the LAP/RESET key , press the LAP/RESET key

The laps can also be timed automatically The laps can also be timed automatically (see section “AUTO LAP”). (see section “AUTO LAP”). A maximum of 99 lap times are saved A maximum of 99 lap times are saved for each workout.for each workout.

After your workoutAfter your workoutOnce you have completed your workout, transfer the Once you have completed your workout, transfer the training data to the memory of the GPS watch:training data to the memory of the GPS watch:

− Press and hold the LAP/RESET− Press and hold the LAP/RESET

V1

It will go out when you stop your workout.It will go out when you stop your workout.

, press the LAP/RESET key , press the LAP/RESET key


IRE00800/52323000

IRE OperationGB

42

− Complete your workout (the workout symbol 24 will go out) and finish by accessing time mode. Thus, you terminate GPS reception to save battery power of the GPS watch.

Interval mode with GPSIn interval mode, you can perform up to four sports con-secutively and with multiple repetitions.

Example: You configure three repetitions, the first activity involves 5:00 minutes of running, the second activity in-volves 3:00 minutes of walking. You start your workout, the GPS watch displays “RUN” and counts down from 5 minutes. A time signal will sound when ten seconds are left; then the 2nd activity will begin. The GPS watch dis-plays “WALK” and counts down from 3 minutes; a time sig-nal will be emitted when 10 seconds are left. Then the first activity will restart. The process will be repeated a second time, then the workout is complete and “FINISHED!” will appear on the GPS watch.

As in workout mode, the GPS watch automatically meas-ures the distance and heart rate and calculates the calo-ries burned. After your workout, the GPS watch will save all relevant data and you can view this data on your GPS watch or transfer it to the Crane Connect app on your smartphone/tablet for further analysis. If the Internet connection on your smartphone is active, the Crane Connect app will automatically upload all workout data to the website www.cranesportsconnect.com for perma-nent storage after your workout.

Korrektu

r volves 3:00 minutes of walking. You start your workout, the GPS watch displays “RUN” and counts down frthe GPS watch displays “RUN” and counts down frminutes. A time signal will sound when ten seconds are minutes. A time signal will sound when ten seconds are left; then the 2nd activity will begin. The GPS watch disleft; then the 2nd activity will begin. The GPS watch displays “WALK” and counts down from 3 minutes; a time sigplays “WALK” and counts down from 3 minutes; a time signal will be emitted when 10 seconds are left. Then the first nal will be emitted when 10 seconds are left. Then the first

art. The process will be repeated a second art. The process will be repeated a second time, then the workout is complete and “FINISHED!” will time, then the workout is complete and “FINISHED!” will appear on the GPS watch.appear on the GPS watch.

As in workout mode, the GPS watch automatically measAs in workout mode, the GPS watch automatically measures the distance and heart rate and calculates the caloures the distance and heart rate and calculates the calories burned. After your workout, the GPS watch will save ries burned. After your workout, the GPS watch will save

V1

Example: You configure three repetitions, the first activity Example: You configure three repetitions, the first activity involves 5:00 minutes of running, the second activity ininvolves 5:00 minutes of running, the second activity involves 3:00 minutes of walking. You start your workout, volves 3:00 minutes of walking. You start your workout, the GPS watch displays “RUN” and counts down fr


GB

IRE00800/52323000

Operation GBIRE

43

To access the interval mode:

− Tap the MODE key 12 several times if necessary until the world “INTERVAL” appears in the top row 15 . After a moment, the first activity (in this case “Run”) with the config-ured time (in this case 3 minutes – “03:00”) will appear and the number of repetitions (“03 REP”).

Defining intervalsBefore you start your workout, you can define how it is structured:

1. In interval mode, press and hold the MODE key 12 until the number of repetitions flashes in the bottom row.

2. Configure how often certain activities will be repeated.

3. Tap the VIEW key 10 . The first activity will be shown.

4. Select “OFF” to deactivate this activity and continue with step 11. Or select “ON” to edit the sport.

5. Tap the VIEW key 10 . The sport will start to flash.

6. Now select one of the following sports:

Korrektu

r Before you start your workout, Before you start your workout, you can define how it is structured:you can define how it is structured:

al mode, press and hold al mode, press and hold the MODE key

Korrektu

r

12 until the number of until the number of until the number of repetitions flashes in the bottom row.repetitions flashes in the bottom row.

Configure how ofConfigure how ofwill be repeated.will be repeated.

Tap the Tap the

V1“03:00”) will appear and the number “03:00”) will appear and the number

V1

V1

V1

V1

V1


IRE00800/52323000

IRE OperationGB

44

RUN, JOG, WALK, REST, FAST, MED, SLOW.

7. Tap the VIEW key 10 . The workout duration will start to flash.

8. Set the minutes for the desired workout length.


10. Set the seconds for the workout length.


12. Repeat steps 4 to 11 for the other three sports.

You have now defined your interval workout.

Starting⁄stopping the interval workout − Before starting your workout, wait until the GPS watch is receiving a proper GPS signal and the GPS icon 16 is no longer flashing (also see section “Finding satellites”).

− Press the ST./STP key 9 to start or stop the interval workout. The workout icon 24 will illuminate. It will go out when you stop your workout.

− To switch to the next sport before the set time has elapsed, tap the LAP/RESET key 11 .

After your workoutOnce you have completed the workout, the GPS watch will automatically save the workout data.

If you stop the workout early with the ST./STP key 9 , you can manually save the workout data to the memory of the GPS watch:

Korrektu

r Starting⁄stopping the interval workoutStarting⁄stopping the interval workout− Before starting your workout, wait until the GPS − Before starting your workout, wait until the GPS

ch is receiving a proper GPS signal and the ch is receiving a proper GPS signal and the is no longer flashing is no longer flashing

(also see section “Finding satellites”).(also see section “Finding satellites”).

T./STP key T./STP key

Korrektu

r

9 to start or stop the interval to start or stop the interval to start or stop the interval

The workout icon The workout icon

Korrektu

r

24 will illuminate. It will go out will illuminate. It will go out will illuminate. It will go out when you stop your workout.when you stop your workout.

ch to the next sport before the set time has ch to the next sport before the set time has elapsed, tap the LAP/RESET key elapsed, tap the LAP/RESET key

V1

o 11 for the other three sports.o 11 for the other three sports.

You have now defined your interval workout. You have now defined your interval workout.

Starting⁄stopping the interval workoutStarting⁄stopping the interval workout


GB

IRE00800/52323000

Operation GBIRE

45

− Press and hold the LAP/RESET key 11 until the workout data are reset to the initial values.

As a result, you have reset all data for the workout to zero and can start a new workout. The data for the workout you completed will be stored in the memory of the GPS watch. You can view them in the protocol later (see section “Reading protocols”) or transfer them to the Crane Connect app on your smartphone/tablet (see section “Data transfer”).

− Complete your workout (the workout symbol 24 will go out) and finish by accessing time mode. Thus, you terminate GPS reception to save battery power of the GPS watch.

History modeIn protocol mode, you can view the data saved during the workouts.

To access the protocol mode:

− Tap the MODE key 12 several times if necessary until the word “PROTOCOL” appears in the top row 15 . The last data record saved will appear after a moment:

• You will see the number of the data record (“02”) and the date (“APR30”) in the top row 15 .

Korrektu

r will go out) and finish by accessing time mode. Thus, you terminate GPS reception to save battery power you terminate GPS reception to save battery power

In protocol mode, you can view In protocol mode, you can view the data saved during the workouts.the data saved during the workouts.

To access the protocol mode:To access the protocol mode:

− Tap the MODE k− Tap the MODE kif necessary until the word if necessary until the word “PROTOCOL” appears in the top “PROTOCOL” appears in the top

V1out (the workout symbol out (the workout symbol

will go out) and finish by accessing time mode. Thus, will go out) and finish by accessing time mode. Thus, you terminate GPS reception to save battery power you terminate GPS reception to save battery power


IRE00800/52323000

IRE OperationGB

46

• You will see the time when the workout is completed in the centre row.

• In the bottom row, you will see the number of laps (“L02”) to the extent they were counted and the week day (“TUE”).

− By pressing the ST./STP 9 or LAP/RESET key 11 , you browse forward or backward through the stored data records.

− By pressing the VIEW key 10 , you can access further details for the selected workouts on four or five pages. In the process, the top row will always show the number of the data record and the date.

• 2nd page Centre: Distance, bottom: Time

• 3rd page Centre: average speed, bottom: calories.

• 4th page Centre: average pace, bottom: calories.

• 5th page Centre: maximum heart rate, bottom: average heart rate.

• 6th page (only when laps were recorded) Top: lap number and lap distance. Centre: lap time Bottom: interim time

− In the lap view, you browse forward or backward through the stored lap data with the ST./STP 9 or LAP/RESET key 11 .

− Press the VIEW key 10 to go back to the workout

Korrektu

r pages. In the process, the top row will always show the number of the data record and the date.the number of the data record and the date.

e: Distance, bottom: Timee: Distance, bottom: Time

Centre: average speed, bottom: calories.Centre: average speed, bottom: calories.

e: average pace, bottom: calories.e: average pace, bottom: calories.

5th page 5th page e: maximum heart rate, bottom: average heart rate.e: maximum heart rate, bottom: average heart rate.

6th page (only when laps were r6th page (only when laps were r

V1

, you can access further , you can access further details for the selected workouts on four or five details for the selected workouts on four or five pages. In the process, the top row will always show pages. In the process, the top row will always show the number of the data record and the date.


GB

IRE00800/52323000

Operation GBIRE

47

summary.

Deleting workout dataYou can delete the data for the last workout or all data out of the memory of the GPS watch:

1. Access the protocol mode (see previous section).

2. Press and hold the MODE key 12 until the word “DELETE” appears in the top row. “Last” will appear in the centre row.

3. If you do not want to delete the last workout you saved, proceed with step 6.

4. If you would like to delete the last workout saved, select “YES” with the ST./STP key 9 in the bottom row.

5. Tap the VIEW key 10 . The last workout is deleted and the message “DONE !” will appear briefly. Then the GPS watch will switch back to protocol mode.

6. Tap the VIEW key 10 . Now “ALL” is displayed in the centre row.

7. If you would like to delete all the workout data saved, use the ST./STP key 9 to select “YES” in the bottom row.

8. Tap the VIEW key 10 . If you selected “Yes” in the previous step, all data records have been deleted and the message “DONE !” will appear briefly. Then the GPS watch will switch back to protocol mode.

Korrektu

r o delete the last workout saved, o delete the last workout saved, select “YES” with the ST./STP key select “YES” with the ST./STP key

Korrektu

r 9

Korrektu

r 10 .

The last workout is deleted and the message “DONE !” The last workout is deleted and the message “DONE !” will appear briefly. Then the GPS watch will switch will appear briefly. Then the GPS watch will switch back to protocol mode.back to protocol mode.

Tap the VIEW key VIEW key

Korrektu

r

Now “ALL” is displayed in the centre row.Now “ALL” is displayed in the centre row.

If you would like tIf you would like tsaved, use the ST./STP key saved, use the ST./STP key

V1 want to delete the last workout you want to delete the last workout you

o delete the last workout saved,


IRE00800/52323000

IRE OperationGB

48

Alarm modeIn alarm mode, you can view and set the alarm time.

To access the alarm mode:

− If necessary, tap the MODE key 12 several times until the word “ALARM” appears in the top row 15 . The set alarm time will appear after a moment.

− You can switch the alarm ON or OFF in the bottom row with the ST./STP key 9 .

Setting the alarm time1. Press and hold the MODE key 12 in alarm mode until the number of hours flashes in the centre row.

2. Set the hour for the intended alarm time with the ST./STP 9 and LAP/RESET key 11 .

3. Tap the VIEW key 10 . The number of minutes will flash in the centre row.

4. Use the ST./STP 9 and LAP/RESET key 11 to set the minutes for the intended alarm time.

5. Tap the VIEW key 10 . The alarm has now been set and switched ON.

An alarm signal will sound for 30 seconds at the set alarm time which you can switch off by pressing any key.

The settings will remain intact and the alarm will “ring” again the next day.

in alarm mode until the number of in alarm mode until the number of hours flashes in the centre row.hours flashes in the centre row.

Set the hour for the intended alarm time with theSet the hour for the intended alarm time with the

Korrektu

r

and LAP/RESET key and LAP/RESET key

Tap the Tap the VIEW key VIEW key

Korrektu

r

The number of minutes will flash in the centre row.The number of minutes will flash in the centre row.

Use the ST./SUse the ST./S

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1


GB

IRE00800/52323000

Operation GBIRE

49

Data transferIn order to transfer the workout data saved on the GPS watch to the Crane Connect app on your smartphone/tablet, the following prerequisites must be in place:

− End any workouts in progress (the workout symbol 24 must be off).

− Save the last workout data on the GPS watch (see both sections “After your workout”).

− Access the time mode (see section “Time mode”).

− Activate Bluetooth® on your smartphone or tablet.

− Install the Crane Connect app on your smartphone/tablet.

− In the app’s home menu, open the analysis via the symbol for the GPS watch. The app will connect to the GPS watch itself and the data transfer will start.

− In the app, you can select whether the data will be automatically deleted from the GPS watch after the transfer or whether it will be retained there.

Korrektu

r ane Connect app on your smartphone/ane Connect app on your smartphone/

− In the app’s home menu, open the analysis via the − In the app’s home menu, open the analysis via the symbol for the GPS watsymbol for the GPS watch. The app will connect to the ch. The app will connect to the GPS watch itself and the data transfer will start.GPS watch itself and the data transfer will start.

− In the app, you can select whether the data will be − In the app, you can select whether the data will be omatically deleted from the GPS watch after the omatically deleted from the GPS watch after the

transfer or whether it will be retained there.transfer or whether it will be retained there.

V1

(see both sections “After your workout”).(see both sections “After your workout”).

− Access the time mode (see section “Time mode− Access the time mode (see section “Time mode

e Bluetooth® on your smartphone or tablet.e Bluetooth® on your smartphone or tablet.

ane Connect app on your smartphone/ane Connect app on your smartphone/


IRE00800/52323000

IRE Cleaning and maintenanceGB

50

Cleaning and maintenance

NOTICE!

Risk of damage!

Water that has penetrated the housing can cause damage to the GPS watch or the transmitter unit. − Never immerse the GPS watch or the transmitter unit in water. − Make sure that no water penetrates the housing.

NOTICE!

Risk due to improper operation!

Improper handling of the GPS watch may result in damage. − Do not use any aggressive cleaners, brushes with metal or nylon bristles or similar. They could damage the surfaces. − Make sure that no drops of water are left on the display of the GPS watch. Water may cause permanent discolouration.

1. Only clean the GPS watch and the chest strap with a soft, damp and lint-free cloth.

Korrektu

r e that no water penetrates the e that no water penetrates the

Korrektu

r

Risk due to improper operation!Risk due to improper operation!

Improper handling of the GPS watch may Improper handling of the GPS watch may result in damage.result in damage.− Do not use any aggressive cleaners, − Do not use any aggressive cleaners,

brushes with metbrushes with met

V1− Never immerse the GPS watch or the − Never immerse the GPS watch or the

e that no water penetrates the


GB

IRE00800/52323000

Cleaning and maintenance GBIRE

51

2. Check the charging contacts 25 on the back of the watch. If they are contaminated with perspiration residue, flakes of skin or dust, use the cleaning brush

3 contained in the product contents.

3. Add a few drops of clean water to the contact pins of the watch and then clean them with the cleaning brush.

325

Changing the transmitter unit’s battery

NOTICE!

Risk of damage!If you do not close the battery compartment cover properly, moisture may penetrate the transmitter unit. This could lead to damage to the transmitter unit. − Firmly close the battery compartment cover to prevent moisture from pene-trating the transmitter unit.

Korrektu

r

Korrektu

r 25

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Changing the transmitter unit’s batteryChanging the transmitter unit’s battery

Korrektu

r

NOTICE!

Risk of damage!Risk of damage!

V1

V1

V1

V1

V1

V1

V1


IRE00800/52323000

IRE Cleaning and maintenanceGB

52

1. To open the battery compartment cover 26 , use a coin to turn it counterclockwise.

2. Take the old battery out and insert a new one of the same type so that it is in the same position. Do not remove the white sticker from the battery compartment. The battery must be located under the small golden metal hook, the positive pole must be pointing up.

3. Put the battery compartment cover back into place. Observe the marks on the cover and on the housing.

4. To close the battery compartment cover, use a coin to turn it clockwise.

26

CR2032

CR2032

CR2032

CR2032

Korrektu

r The battery must be located under the small golden The battery must be located under the small golden metal hook, the positive pole must be pointing up.metal hook, the positive pole must be pointing up.

Put the battery compartment coverPut the battery compartment coverback into place. Observe the marks back into place. Observe the marks on the cover and on the housing.on the cover and on the housing.

Korrektu

r

Korrektu

r V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1

V1


GB

IRE00800/52323000

Storage GBIRE

53

Storage − Clean the GPS watch and the chest strap thoroughly before storage (see section “Cleaning”).

− Charge the battery pack fully.

− Switch the GPS watch off.

− Remove the battery from the transmitter unit.

− Always store the GPS watch and the chest strap in a dry place.

− Protect the GPS watch and the chest strap against exposure to direct sunlight and other sources of heat.

− Store the GPS watch and chest strap so that they are not accessible for children at a storage temperature between -20 °C and +70 °C.

Korrektu

r exposure to direct sunlight and other sources of heat.

e the GPS watch and chest strap so that they are e the GPS watch and chest strap so that they are not accessible for children at a storage temperature not accessible for children at a storage temperature between -20 °C and +70 °C.between -20 °C and +70 °C.

V1ect the GPS watch and the chest strap against ect the GPS watch and the chest strap against

exposure to direct sunlight and other sources of heat.exposure to direct sunlight and other sources of heat.

e the GPS watch and chest strap so that they are


IRE00800/52323000

IRE TroubleshootingGB

54

Troubleshooting

Problem Possible cause Solutions, tips

The battery pack in the GPS watch is not charging.

The charging ca-ble is not proper-ly connected.

The metal pins must lock directly into the contact points of the watch.

Charging con-tacts are dirty.

Clean the charg-ing contacts on the back of the watch (see sec-tion “Cleaning”).

USB port is de-energised.

Make sure that the USB port to which the GPS watch is connect-ed has power.

Keys don't respond.

Keys are locked. To unlock them tap the VIEW 10 and MODE key 12 at the same time.

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r ing contacts on the back of the the back of the watch (see secwatch (see section “Cleaning”). tion “Cleaning”).

USB port is USB port is de-energised.de-energised.

Keys don't Keys don't Keys are locked. To unlock Keys are locked. To unlock

V1

V1

watch.

Clean the chargClean the charging contacts on ing contacts on the back of the the back of the


GB

IRE00800/52323000

Troubleshooting GBIRE

55


Display blank. The GPS watch is off.

To turn it on, press the LAP/RESET key 11 for approx. 5 seconds.

The battery pack is empty.

Charge the bat-tery pack.

Contrast too low. Increase the con-trast (see “System setting mode”, “Contrast”).

Display dark. GPS watch is overheated (ex-posure to sun-light, excessively high ambient temperature).

Let the GPS watch cool off.

Display very slow.

Normal at tem-peratures below 0 °C.

When the tem-perature rises above 0 °C again, the display will return to normal.

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r Display dark. GPS watch is Display dark. GPS watch is

overheated (exoverheated (exposure to sunposure to sunlight, excessively light, excessively high ambient high ambient temperature).temperature).

Display very Display very

V1

V1

V1

tery pack.tery pack.

Contrast too low. Increase the conContrast too low. Increase the contrast (see “System trast (see “System setting mode”, setting mode”,


IRE00800/52323000

IRE TroubleshootingGB

56


Speed is not shown.

GPS reception insufficient.

Observe the notes on “Gen-eral information about GPS”.

Speed is shown al-though not walking/cycling.

Heart rate is not shown.

Connection between the GPS watch and the chest strap interrupted.

Establish the Bluetooth® connection be-tween the GPS watch and the chest strap (see section “Pair ? Strap”).

Transmitter unit battery emp-ty or inserted incorrectly.

Check the battery (see “Changing the transmitter unit's battery”).

No conductive connection with the skin because the chest strap is too dry.

Moisten the gummed part of the strap with a small amount of water.

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r the chest strap interrupted.

connection beconnection between the GPS tween the GPS watch and the watch and the

Transmitter unit Transmitter unit battery empbattery empty or inserted ty or inserted incorrectly.incorrectly.

V1

V1Establish the Establish the

Bluetooth® Bluetooth® connection beconnection be


GB

IRE00800/52323000

Troubleshooting GBIRE

57


Workout can-not be started.

The memory of the GPS watch is full; the work-out time or lap time exceeds 99 hours.

Transfer data to the Crane Connect app and clear mem-ory (see section “RESET”).

“Memory full!” message.

Memory fullPlease make sure that the GPS watch does not automati-cally clear the memory containing your data.

To do so, you must activate automatic clearing of the memory after a data transfer under Settings before the data is transferred from the GPS watch to the app.

If the memory of the watch is full, no more data can be recorded and the time measurement for the workout can no longer be started in workout or interval mode. This means that the ST./STP key can no longer be pressed. However, before the memory is full, the mes-sage “Memory full!” will appear on the display of the GPS watch. Once the workout time or the lap time is full (99h), no further recording is possible either!

If you have further questions, you can also reach us at the following address:

KRIPPL-WATCHES

Maria-Theresia-Straße 41 4600 Wels Austria

Korrektu

r cally clear the memory containing your data.cally clear the memory containing your data.

To do so, you must activate automatic clearing of the To do so, you must activate automatic clearing of the memory after a data transfer under Settings before the memory after a data transfer under Settings before the data is transferred from the GPS watch to the app.data is transferred from the GPS watch to the app.

If the memory of the watch is full, no more data can be If the memory of the watch is full, no more data can be recorded and the time measurement for the workout recorded and the time measurement for the workout can no longer be started in workout or interval mode. can no longer be started in workout or interval mode. This means that the ST./STP key can no longer be This means that the ST./STP key can no longer be pressed. However, before the memory is full, the mes. However, before the memory is full, the message “Memory full!” will appear on the display of the sage “Memory full!” will appear on the display of the GPS watch. Once the workout time or the lap time is full GPS watch. Once the workout time or the lap time is full

V1Please make sure that the GPS watch does not automatiPlease make sure that the GPS watch does not automati

cally clear the memory containing your data.cally clear the memory containing your data.


IRE00800/52323000

IRE Technical dataGB

58

E-mail address: [email protected]

Please visit our online product service page for helpful FAQs for your GPS watch.

http://www.cranesportsconnect.com EAN Code: 20023898

Technical dataModel: HO5-GPS-6A/6B/6C

Power supply – GPS watch – Transmitter unit

lithium polymer battery pack, 380 mAH, 3.7 V lithium battery 3 V, CR2032

Transmission frequency from the transmitter unit to the GPS watch: Bluetooth® 4.0

GPS accuracy: 3 metres CEP (50 %) in the open

Operating temperature:

Storage temperature:

-10 °C to +60 °C

-20 °C to +70 °C

Article number: 92412

All data stated are merely nominal values. Technical changes reserved.

Korrektu

r pack, 380 mAH, 3.7 Vpack, 380 mAH, 3.7 Vlithium battery 3 V, lithium battery 3 V, CR2032CR2032

Transmission frequency from Transmission frequency from the transmitter unit to the GPS the transmitter unit to the GPS

Operating temperature:Operating temperature:

Storage temperature:Storage temperature:

V1

HO5-GPS-6A/6B/6CHO5-GPS-6A/6B/6C

lithium polymer battery lithium polymer battery pack, 380 mAH, 3.7 Vpack, 380 mAH, 3.7 V


GB

IRE00800/52323000

Disposal GBIRE

59

Declaration of conformity

Krippl-Watches hereby declares that the GPS watch (model no. HO5-GPS-6A/6B/6C) complies with the fundamental requirements and other applicable provisions of the R&TTE

1999/5/CE, 2004/108/EC (electromagnetic compatibility) and RoHS 2011/65/EU directives.

You can access the complete text for the declaration of conformity on our website:

www.cranesportsconnect.com (EAN code: 20023898).

Disposal

Disposing of the packagingDispose of the packaging separated into single type materials. Dispose of card-board and carton as waste paper and foils via the recyclable material collection service.

Korrektu

r www.cranesportsconnect.com (EAN code: 20023898).www.cranesportsconnect.com (EAN code: 20023898).

Disposing of the packagingDisposing of the packaging

Korrektu

r

Korrektu

r

Korrektu

r

Dispose of the packaging separated into Dispose of the packaging separated into single type materials. Dispose of cardsingle type materials. Dispose of cardboard and carton as waste paper and board and carton as waste paper and

V1You can access the complete text for the declaration of You can access the complete text for the declaration of

www.cranesportsconnect.com (EAN code: 20023898).


IRE00800/52323000

IRE DisposalGB

60

Disposing of old devices(Applicable in the European Union and other European states with systems for the separate collection of reusable waste materials)

Old devices must not be disposed of with household waste! If the GPS watch can no longer be used, every user is required by law to dispose of old devices separately from their household

waste, e.g. at a collection point in his community/bor-ough. This ensures that old devices are recycled in a professional manner and also rules out negative conse-quences for the environment. For this reason, electrical equipment is marked with the symbol shown here.

Batteries and rechargeable batteries may not be disposed of with household waste!

As the end user you are required by law to bring all batteries and rechargeable batteries, regardless whether they contain harmful substances* or not, to a collection point run by the communal authority or borough or to a

retailer, so that they can be disposed of in an environ-mentally friendly manner.

Bring the entire GPS watch (including the battery pack) to your collection point and make sure that it is in an uncharged state!

* labelled with: Cd = cadmium, Hg = mercury, Pb = lead

Korrektu

r ough. This ensures that old devices are recycled in a professional manner and also rules out negative conseprofessional manner and also rules out negative consequences for the environment. For this reason, electrical quences for the environment. For this reason, electrical equipment is marked with the symbol shown here.equipment is marked with the symbol shown here.

Batteries and rechargeable batteries may not be Batteries and rechargeable batteries may not be disposed of with household waste!disposed of with household waste!

As the end user you are required by law to As the end user you are required by law to bring all batteries and rechargeable batteries, bring all batteries and rechargeable batteries, regardless whether they contain harmful regardless whether they contain harmful substances* or not, to a collection point run by substances* or not, to a collection point run by

V1

devices separately from their household devices separately from their household , e.g. at a collection point in his community/bor, e.g. at a collection point in his community/bor

ough. This ensures that old devices are recycled in a ough. This ensures that old devices are recycled in a professional manner and also rules out negative conseprofessional manner and also rules out negative conse

GBIRE

Description of malfunction:

Return your com-pleted warranty card together with the

faulty product to:

Krippl-Watches

Freepostcode: RLTU-ZYZE-SKLG

Picadilly 180

W1J 9HF London

UNITED KINGDOM

Your details:

Name

Address

E-mail

Date of purchase * * We recommend you keep the receipt with this warranty card.

Location of purchase

Phone lines available Monday to Friday, 8am - 6pm. Calls cost 10p per minute from a landline, calls from mobiles may vary.

YEARS

WARRANTY

Warranty CardBLUETOOTH® GPS WATCH WITH HEART RATE MEASUREMENT

AFTER SALES SUPPORT

[email protected]

00800/52323000

Model: AE5-GPS-6A/6B/6CvProduct Code: 92412

06/2015

IRE

GBKorrektu

r Description of malfunction:Description of malfunction:

Korrektu

r

Return your comReturn your com--pleted warranty card pleted warranty card together with the

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r * We recommend you keep the receipt with this warranty card.* We recommend you keep the receipt with this warranty card.

Korrektu

r

Korrektu

r

Korrektu

r V1

* We recommend you keep the receipt with this warranty card.V1

V1

V1

V1

IREGB

Warranty conditions

Dear Customer,

The ALDI warranty offers you extensive benefits compared

to the statutory obligation arising from a warranty:

Warranty period: 3 years from date of purchase.

6 months for wear parts and con-sumables under normal and proper conditions of use (e.g. rechargeable batteries).

Costs: Free repair/exchange or refund. No transport costs.

Hotline: Free hotline.

ADVICE: Please contact our service hotline by phone, e-mail or fax before sending in the device. This allows us to provide support in the event of possible oper-ator errors.

In order to make a claim under the warranty, please send us:

• together with the faulty item the original receipt and the warranty card properly completed.

• the faulty product with all components included in the packaging.

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r

Korrektu

r Free repair/exchange or refund.No transport costs.No transport costs.

Free hotline.

Please contact our service hotline by phone, e-mail or fax before sending in the device. This allows us to provide support in the event of possible operator errors.

In order to make a claim under the warranty, please In order to make a claim under the warranty, please send us:send us:

together with the faulty ittogether with the faulty it

V1

conditions of use (e.g. rechargeable conditions of use (e.g. rechargeable

Free repair/exchange or refund.Free repair/exchange or refund.

GBIRE

The warranty does not cover damage caused by:

• Accident or unanticipated events (e.g. light-ning, water, fire).

• Improper use or transport.

• Disregard of the safety and maintenance in-structions.

• Other improper treatment or modification.

After the expiry of the warranty period, you still have the possibility to have your product repaired at your own ex-pense. If the repair or the estimate of costs is not free of charge you will be informed accordingly in advance.

This warranty does not limit the statutory obligation of the seller arising from a warranty. In the event that a product is received for repair, neither the service company nor the seller will assume any liability for data or settings possibly stored on the product by the customer.

Korrektu

r charge you will be informed accordingly in advance.charge you will be informed accordingly in advance.

This warranty does not limit the statutory obligation of the This warranty does not limit the statutory obligation of the seller arising from a warranty. In the event that a product seller arising from a warranty. In the event that a product is received for repair, neither the service company nor the is received for repair, neither the service company nor the seller will assume any liability for data or settings possibly seller will assume any liability for data or settings possibly stored on the product by the customer.stored on the product by the customer.

V1

After the expiry of the warranty period, you still have the After the expiry of the warranty period, you still have the possibility to have your product repaired at your own expossibility to have your product repaired at your own expense. If the repair or the estimate of costs is not free of pense. If the repair or the estimate of costs is not free of charge you will be informed accordingly in advance.charge you will be informed accordingly in advance.

This warranty does not limit the statutory obligation of the

Spend a little Live a lot.

Great care has gone into the manufacture of this product and it should there-fore provide you with years of good service when used properly. In the event of product failure within its intended use over the course of the first 3 years af-ter date of purchase, we will remedy the problem as quickly as possible once it has been brought to our attention. In the unlikely event of such an occurrence, or if you require any information about the product, please contact us via our helpline support services, details of which are to be found both in this manual and on the product itself.

PRODUCED IN CHINA FOR:

ALDI STORES LTD. PO BOX 26, ATHERSTONE

WARWICKSHIRE, CV9 2SH

ALDI STORES (IRELAND) LTD.

PO BOX 726, NAAS, CO. KILDARE.

visit us at www.aldi.com

AFTER SALES SUPPORT

www.aldi.co.uk00800/52323000

Model: AE5-GPS-6A/6B/6C Product code: 92412

06/2015

YEARSWARRANTY

GB IRE

IRELAN

theoblem

unlikely eout the produ

ils of which are to

FOR:

D. PO BOX 26, A

IRE, CV9 2SH

Korrektu

r

roduct and ien used propee course o

Documents

Bluetooth® GPS Watch with Heart Rate Measurement1 25 2 2 1 2 7 7 8 D F H E G KRIPPL-WATCHES WARENHANDELS GMBH MARIA-THERESIA-STR. 41 4600 WELS, AUSTRIA SERIAL NO.: PO7044 MODEL NO.: