USER MANUAL FOR BOM CREATION

PRESS ENTER

Step 1: Click on CS01 for creation of the BOM.

Step 3: Check the Validity From Date of the BOM.

Step 2: Put the Material, Plant and Usage(Always 1) for which the BOM is to be Created.

Step 6: The unit in which the quantity of the component items are required.

Step 5: Put the quantity of the Component Items.

Step 4: Enter the Components Item Code which is required to produce the material.

Step 8: Save the BOM

Step 7: Check the base Quantity of the BOM Header material.

Once the BOM is saved the system will give the below message.