Step 8: Form a figure-8 knot in the ends of the rope. To do
this, first make a loop in the rope,
like this.
Step 9: Then, instead of putting the ends of the rope through
the loop, give the loop a half twist
first, like this.
7/31/2019 Breast Harness
4/17
Step 10: Pull the knot tight, and you have a support point.
Step 11: Take the second piece of rope and double it. Pass the
loop through one of the existing
loops in the lower harness, then run the ends of the rope
through the loop. Pull the rope tight to
anchor it.
7/31/2019 Breast Harness
5/17
Step 12: Wrap the rope around the front of the body, over the
breasts.
7/31/2019 Breast Harness
6/17
7/31/2019 Breast Harness
7/17
Step 14: Wrap in the reverse direction, then run the ends
through the loop again and reverse
direction again.
Step 15: When you have three double strands of wraps, secure the
ends with a half hitch, like
you did for the lower harness.
7/31/2019 Breast Harness
8/17
Step 16: Separate the two ends, and lead them over the
shoulders.
7/31/2019 Breast Harness
9/17
7/31/2019 Breast Harness
10/17
Step 18: Run the rope ends under the upper set of wraps.
Step 19: Loop the rope ends around the upper wraps, so that the
ends go in between the ropes
from the shoulders.
7/31/2019 Breast Harness
11/17
7/31/2019 Breast Harness
12/17
7/31/2019 Breast Harness
13/17
Step 21: Run the rope ends under the lower wraps.
Step 22: Loop the rope ends around the lower wraps and pull
taut, just as you did with the
upper wraps.
7/31/2019 Breast Harness
14/17
Step 23: Take the rope ends, and feed them under the upper wraps
from the bottom. Pull the
ends down.
Step 24; Feed the ends under the lower wraps from the bottom.
Pull on the ropes, pulling theupper and lower wraps together. This
gently squeezes the breasts, supporting them and making
