GENERAL“AE” range of 2-way (Fig.200 and Fig.210) and 4-way (Fig.220 and Fig.230) breeching inlet cabinets are generally fabricated from electro-galvanised steel material. Aluminium or stainless steel materials are available upon request.

The breeching inlet cabinets are manufactured strictly in accordance with BS 5041 : Part 5 : 1974.

The door hinges are either riveted or welded to the cabinet and swings out 180 degree from left to right. The cabinet comes with a standard springlock and 6mm thick wire glass. The wordings on the glass vary according to the fire protection systems in which the breeching inlet is installed, eg. DRY RISER INLET, WET RISER INLET, SPRINKLER BREECHING INLET, FOAM INLET, etc.

The rear of the cabinet panel has the cut-out holes for easy installa-tion of the breeching inlet to the pipework.

The quality of workmanship and its’ finishes are carefully planned and executed from the initial stage of preparing the material and fabricating up to the painting process.

The standard finishes of the electro-galvanised steel and aluminium cabinets are “Red” epoxy/polyester powder coated and oven baked. Stainless steel cabinets come with 4B quality finishes.

FEATURES• Compact and elegant design.• Quality finishes in epoxy/polyester powder coated and

oven baked.• Easy installation with pre-cut flange holes at the rear panel.

Fig.200

Fig.230

Fig.210

Fig.220

BREECHING INLET CABINET

Fig.200

Fig.220

“Surface” Type Breeching Inlet Cabinet

FRONT ELEVATION SECTION VIEW REAR VIEW

395mm

20mm

20mm

595mm

Springlock

6mm wire glass

295mm

370mm

25mm

100mm cut-out hole

8 nos x 22mm bolt holes

185m

m

185m

m

240mm 355mm

PCD = 180mm dia

595mm

20mm

595mm

Springlock

6mm wire glass

20mm

150mm cut-out hole

8 nos x 22mm bolt holes

255m

m

315m

m

255mm 340mm

PCD = 240mm dia

295mm

570mm

25mm

Fig.210

Fig.230

“Recessed” Type Breeching Inlet Cabinet

FRONT ELEVATION SECTION VIEW REAR VIEW

100mm cut-out hole

8 nos x 22mm bolt holes

185m

m

185m

m

240mm 355mm

PCD = 180mm dia

395mm

38mm

38mm

38mm 38mm 595mm

Springlock

6mm wire glass

295mm

370mm

25mm

595mm

38mm

38mm 38mm

38mm

595mm

Springlock

6mm wire glass

150mm cut-out hole

8 nos x 22mm bolt holes

255m

m

315m

m

255mm 340mm

PCD = 240mm dia

295mm

570mm

25mm

* All dimensions shown are in millimetres.

* Due to the improvement in the design and standard, we reserve the right to change the specifications without prior notice.

BREECHING INLET CABINET