Sheet Metal Contractors

Industrial Metal Manufacturers

Paint Finishing Systems

Commercial & Institutional

We have been fabricating welded stacks andbreeching for the past 18 years, both indesign/build, and built to specifications. Some stacks and breechings are pre-insulatedand pre-cladded ready for installation.

Hoisting/InstallationThe installation is normally performed by crane.Hoisting by helicopter is performed if and whennecessary.

Material SpecificationStainless Steel, Carbon Metal and AluminizedSteel are primarily used for the fabricationprocess. Based on the specification of the project,the customer will specify the type of metal.

Welding ProcessA.W.S. D9.1 welding is used for various weldedproducts such as Stacks, Breeching and SpecialExhaust Systems.

Stacks and BreechingsOur Stacks and Breechings are professionallyengineered by an Ontario Certified P. Eng.

• Manufactured to SMACNA Design Standards

• Manufactured and Installed to NFPA-96

• A.W.S. D9.1 A QC Welding

STACKS & BREECHING FABRICATION

Tek-Mor Incorporated20 Simpson Rd., Bolton, ON Tel: (905) 857-6415 Fax: (905) 857-5514 or (905) 857-8486

Quality and Commitment is Our Pride

For more information on our Stacks and Breechings or our other products and servicesvisit us at www.tek-mor.com

Tek-Mor Manufactures Custom Fabrication of Self-Supporting Stacks and GuidedStacks for the Commercial, Industrial and Automotive Industry. Stacks and

Breechings are manufactured both as single and double wall.

Our products are produced with precision high quality workmanship and built to customerspecifications for industries such as:

Automotive • Industr ia l • Pharmaceutical • Commercial Inst i tut ional • Hospitals • Col leges/Univers i t ies

Food/Beverage • Treatment Plants