www.metalmont.it

• Bearings temperature probes.

• Anti-clogging device on elevator head.

• Belt misalignment control device on the head.

• Belt misalignment control device on the foot.

• Dust suction fitting between elevator legs (standard for ET-150/200/250).

• Steel or stainless steel buckets.

• Self-extinguishing and food-grade belts.

• Execution in painted steel or in stainless steel.

• Explosion proof execution according to the ATEX directive.

• Additional feeding hopper.

• Two or three inlets hopper.

• Service platforms, rest platforms, ladders.

AVAILABLE ACCESSORIES AND SPECIAL VERSIONS

ET SERIESET SERIES

Via Guglielmo Marconi, 9231020 Revine Lago - Treviso - Italytel +39 0438 562028

BUCKET ELEVATORS

TECHNICAL DATA

Data and features are not binding.The company reserves the right to make changes without notice.

Technical Data / Model ET-040 ET-060 ET-120 ET-150 ET-200 ET-250Capacity* t/h 40 60 120 150 200 250Belt speed m/s 2,9 2,9 2,9 2,9 2,9 2,9Buckets width/Belt width mm 140/160 180/220 240/270 280/320 300/330 330/360Belt type Antistatic and oil resistant black rubberN. of buckets/m n. 9 6 6,5 5,5 5 5,5Buckets material PolyethyleneLegs thickness mm 2 2 2 2,5 2,5 2,5Wear plate on the head (polyethylene) mm 8 8 8 8 8 8

Dimensions / Model ET-040 ET-060 ET-120 ET-150 ET-200 ET-250

A - Height of the head mm 940 1204 1240 1511 1511 1511B - Height of the foot mm 911 1031 1281 1524 1524 1524C - Frontal width of the legs mm 190 268 336 445 445 445D - Lateral width of the legs mm 180 228 278 345 345 345H - Standard legs heights mm 500/1000/1500/2000 Q - Size of the square inlet/outlet mm 210 210 300 300 350 350

*Capacity based on wheat S.G. 0,78 t/m3; moisture 15%; Impurities 2%; machine horizontal

B15

00 - I

SPEZ

IONE

H=50

0-100

0-150

0-200

0A

Q

Q

DC

Q

DX

bucketelevators

The highest performances in the agroindustrial sector

BUCKET ELEVATORS

ET SERIES

Ideal for the vertical handling of the cereals or bulk granular products in general, Metalmont bucket elevator ET series features a high degree of performance reliability guaranteed by Metalmont design philosophy, always aimed at achieving the highest level of efficiency.

Speed rotation sensor

ELEVATOR LEGGING

• Standard legging in welded and hot-dipped galvanized steel.• Inspection legging.

IDLER ELEMENT (TAIL)

• Squirrel cage idler pulley.• Tensioning slides with supports and self-aligning ball bearings.• High resistance idler shaft.• Screw belt tensioner system.• Speed rotation sensor.• Inlet hopper.

6sizes

BELTS

• Multi-ply with rubber coating and fabric reinforcing plies.• Oil and grease resistant according to ISO 252 and DIN 22102.• Antistatic according to ISO 284 and DIN 22104.• Continuous working temperature range -20°C / +100°C with maximum peaks up to 130°C.

6sizes

6sizes

DRIVING ELEMENT (HEAD)

• Helical bevel geared motors direct coupled to the driveshaft.• Back-stop device.• Drive pulley with rubber coating.• High resistance driveshaft.• Supports with self-aligning ball bearings.• Dismountable upper cover.• Wear plate on the upper head cover.• Discharge hopper with square outlet.• Inspection window.

6sizes

6sizes

BUCKETS

• Material: High Density Polyethylene (HDP).• Medium resistance to abrasion.• Good resistance to impacts.• Working temperature up to 70°C.• Suitable for foodstuff.

6sizes

RANGE

• ET - 040 40 t/h• ET - 060 60 t/h• ET - 120 120 t/h• ET - 150 150 t/h• ET - 200 200 t/h• ET - 250 250 t/h

High build quality machines:performance and reliability guaranteed

Buckets

Multi-ply belt

Inspection legging

Inspection window

Discharge hopper with

square outlet

Inlet hopper