Embed Size (px)
Citation preview
buesch.com
Angle and butt jointsfor EPDM or NBR
UNO
BÜSCH Technology GmbHNeuburger Straße 2690451 NürnbergE-Mail [email protected]. +49 911 46 254-0Fax +49 911 46 254-70
buesch.com
UNOANGLE AND BUTT JOINTS
“Designed to last“The BÜSCH pledge of quality
READY TO ASSEMBLEfor quick and easyinstallatione
WELDING TEST for flawless stainless-steel joints
UNOANGLE AND BUTT JOINTS for total reliability for all seal joints
SELF-THREADINGfor stainless steel passivation for total protection against corrosion
PRESSURE TEST to ensure water-tight-ness prior to delivery
BÜSCH TECHNOLOGY GMBHCOMPANY
BÜSCH CERTIFICATIONS
Member of the Warenzeichenverband Edel-stahl Rostfrei e.V. (trademark association for stainless steel)
Member of the Deutschen Vereinigung für Wasserwirtschaft, Abwasser und Abfall e.V. (German Association for Water, Wastewater and Waste.)
Certified to ISO 9001
Certified for factory production control of structural components and assembly kits for steel construction plants up to EXC2 in accordance with EN 1090-2
The EPDM seals used by BÜSCH comply with the technical specifications of British Standard BS 6920-1:2000 for use in drin-king water. WRAS Directory: 1109543
Manufacturer qualification for welding steel structures in accordance with EN 1090-2:2008 + A1:2011 and compliance with the technical requirements for the manufacture of fittings in accordance with DIN 19704 hydraulic steel construction
buesch.com
Angle and butt jointsfor EPDM or NBR
UNO
BÜSCH Technology GmbHNeuburger Straße 2690451 NürnbergE-Mail [email protected]. +49 911 46 254-0Fax +49 911 46 254-70
buesch.com
UNOANGLE AND BUTT JOINTS
“Designed to last“The BÜSCH pledge of quality
READY TO ASSEMBLEfor quick and easyinstallatione
WELDING TEST for flawless stainless-steel joints
UNOANGLE AND BUTT JOINTS for total reliability for all seal joints
SELF-THREADINGfor stainless steel passivation for total protection against corrosion
PRESSURE TEST to ensure water-tight-ness prior to delivery
BÜSCH TECHNOLOGY GMBHCOMPANY
BÜSCH CERTIFICATIONS
Member of the Warenzeichenverband Edel-stahl Rostfrei e.V. (trademark association for stainless steel)
Member of the Deutschen Vereinigung für Wasserwirtschaft, Abwasser und Abfall e.V. (German Association for Water, Wastewater and Waste.)
Certified to ISO 9001
Certified for factory production control of structural components and assembly kits for steel construction plants up to EXC2 in accordance with EN 1090-2
The EPDM seals used by BÜSCH comply with the technical specifications of British Standard BS 6920-1:2000 for use in drin-king water. WRAS Directory: 1109543
Manufacturer qualification for welding steel structures in accordance with EN 1090-2:2008 + A1:2011 and compliance with the technical requirements for the manufacture of fittings in accordance with DIN 19704 hydraulic steel construction
buesch.com
Angle and butt jointsfor EPDM or NBR
UNO
BÜSCH Technology GmbHNeuburger Straße 2690451 NürnbergE-Mail [email protected]. +49 911 46 254-0Fax +49 911 46 254-70
buesch.com
UNOANGLE AND BUTT JOINTS
“Designed to last“The BÜSCH pledge of quality
READY TO ASSEMBLEfor quick and easyinstallatione
WELDING TEST for flawless stainless-steel joints
UNOANGLE AND BUTT JOINTS for total reliability for all seal joints
SELF-THREADINGfor stainless steel passivation for total protection against corrosion
PRESSURE TEST to ensure water-tight-ness prior to delivery
BÜSCH TECHNOLOGY GMBHCOMPANY
BÜSCH CERTIFICATIONS
Member of the Warenzeichenverband Edel-stahl Rostfrei e.V. (trademark association for stainless steel)
Member of the Deutschen Vereinigung für Wasserwirtschaft, Abwasser und Abfall e.V. (German Association for Water, Wastewater and Waste.)
Certified to ISO 9001
Certified for factory production control of structural components and assembly kits for steel construction plants up to EXC2 in accordance with EN 1090-2
The EPDM seals used by BÜSCH comply with the technical specifications of British Standard BS 6920-1:2000 for use in drin-king water. WRAS Directory: 1109543
Manufacturer qualification for welding steel structures in accordance with EN 1090-2:2008 + A1:2011 and compliance with the technical requirements for the manufacture of fittings in accordance with DIN 19704 hydraulic steel construction
buesch.com2018-10-08|en
BÜSCHPENSTOCKS
UNO angle and butt jointsDURABLE, RELIABLE, SAFE
UNO processes and standards Advantages of UNO
SAFOX® XL CP
AVAILABLE FOR ALL BÜSCH PENSTOCKS
i
UNO Adhesive bond
i
EXPLOSION PROTECTIONCERTIFICATE
IDENTICAL STRENGTH
IDENTICAL EXPANSION
IDENTICAL ELASTICITY
IDENTICAL MATERIAL PROPERTIES
NO RISK OF JOINT LEACKAGE
UNO angle and butt joints have the same chemical properties and durability as the vulcanised rubber:
UNO angle and butt joints therefore form a single unit with the vulcanised rubber, which means:
INCREASED RISK OF JOINT LEACKAGE
HIGH SUSCEPTIBILITY TO CRACKS
UNPROVEN LONG-TERM STABILITY
JOINT QUALITY DEPENDENT ON THE MANUFACTURE
UNFLEXILE ADHESIVE LAYER-CONNECTION
Adhesive bonds always have a property that is independent of the residual ma-terial and therefore remain an indepen-dent component:
STANDARDS FOR HYDRAULIC STEEL CONSTRUCTION VULCANISATION OR SIMILAR PROCESS
(BONDING MATERIALS ARE NOT COMPARABLE!)
i
BÜSCH angle joints BÜSCH butt joints
All BÜSCH angle joints are vulcanised, according to the re-quirements of the hydraulic steel construction standards.The connecting element used has the same chemical proper-ties as the residual rubber, and forms a unit with it after vulca-nisation.
BÜSCH butt joints (SAFOX®) are butt-welded, which corres-ponds to a similar procedure in accordance with the standards for hydraulic steel construction.An intermediate material is not required, as the thermoplastic properties of the elastomers are sufficient.
BÜSCHPENSTOCKS
UNO angle and butt jointsDURABLE, RELIABLE, SAFE
UNO processes and standards Advantages of UNO
SAFOX® XL CP
AVAILABLE FOR ALL BÜSCH PENSTOCKS
i
UNO Adhesive bond
i
EXPLOSION PROTECTIONCERTIFICATE
IDENTICAL STRENGTH
IDENTICAL EXPANSION
IDENTICAL ELASTICITY
IDENTICAL MATERIAL PROPERTIES
NO RISK OF JOINT LEACKAGE
UNO angle and butt joints have the same chemical properties and durability as the vulcanised rubber:
UNO angle and butt joints therefore form a single unit with the vulcanised rubber, which means:
INCREASED RISK OF JOINT LEACKAGE
HIGH SUSCEPTIBILITY TO CRACKS
UNPROVEN LONG-TERM STABILITY
JOINT QUALITY DEPENDENT ON THE MANUFACTURE
UNFLEXILE ADHESIVE LAYER-CONNECTION
Adhesive bonds always have a property that is independent of the residual ma-terial and therefore remain an indepen-dent component:
STANDARDS FOR HYDRAULIC STEEL CONSTRUCTION VULCANISATION OR SIMILAR PROCESS
(BONDING MATERIALS ARE NOT COMPARABLE!)
i
BÜSCH angle joints BÜSCH butt joints
All BÜSCH angle joints are vulcanised, according to the re-quirements of the hydraulic steel construction standards.The connecting element used has the same chemical proper-ties as the residual rubber, and forms a unit with it after vulca-nisation.
BÜSCH butt joints (SAFOX®) are butt-welded, which corres-ponds to a similar procedure in accordance with the standards for hydraulic steel construction.An intermediate material is not required, as the thermoplastic properties of the elastomers are sufficient.
BÜSCHPENSTOCKS
UNO angle and butt jointsDURABLE, RELIABLE, SAFE
UNO processes and standards Advantages of UNO
SAFOX® XL CP
AVAILABLE FOR ALL BÜSCH PENSTOCKS
i
UNO Adhesive bond
i
EXPLOSION PROTECTIONCERTIFICATE
IDENTICAL STRENGTH
IDENTICAL EXPANSION
IDENTICAL ELASTICITY
IDENTICAL MATERIAL PROPERTIES
NO RISK OF JOINT LEACKAGE
UNO angle and butt joints have the same chemical properties and durability as the vulcanised rubber:
UNO angle and butt joints therefore form a single unit with the vulcanised rubber, which means:
INCREASED RISK OF JOINT LEACKAGE
HIGH SUSCEPTIBILITY TO CRACKS
UNPROVEN LONG-TERM STABILITY
JOINT QUALITY DEPENDENT ON THE MANUFACTURE
UNFLEXILE ADHESIVE LAYER-CONNECTION
Adhesive bonds always have a property that is independent of the residual ma-terial and therefore remain an indepen-dent component:
STANDARDS FOR HYDRAULIC STEEL CONSTRUCTION VULCANISATION OR SIMILAR PROCESS
(BONDING MATERIALS ARE NOT COMPARABLE!)
i
BÜSCH angle joints BÜSCH butt joints
All BÜSCH angle joints are vulcanised, according to the re-quirements of the hydraulic steel construction standards.The connecting element used has the same chemical proper-ties as the residual rubber, and forms a unit with it after vulca-nisation.
BÜSCH butt joints (SAFOX®) are butt-welded, which corres-ponds to a similar procedure in accordance with the standards for hydraulic steel construction.An intermediate material is not required, as the thermoplastic properties of the elastomers are sufficient.
BÜSCHPENSTOCKS
UNO angle and butt jointsDURABLE, RELIABLE, SAFE
UNO processes and standards Advantages of UNO
SAFOX® XL CP
AVAILABLE FOR ALL BÜSCH PENSTOCKS
i
UNO Adhesive bond
i
EXPLOSION PROTECTIONCERTIFICATE
IDENTICAL STRENGTH
IDENTICAL EXPANSION
IDENTICAL ELASTICITY
IDENTICAL MATERIAL PROPERTIES
NO RISK OF JOINT LEACKAGE
UNO angle and butt joints have the same chemical properties and durability as the vulcanised rubber:
UNO angle and butt joints therefore form a single unit with the vulcanised rubber, which means:
INCREASED RISK OF JOINT LEACKAGE
HIGH SUSCEPTIBILITY TO CRACKS
UNPROVEN LONG-TERM STABILITY
JOINT QUALITY DEPENDENT ON THE MANUFACTURE
UNFLEXILE ADHESIVE LAYER-CONNECTION
Adhesive bonds always have a property that is independent of the residual ma-terial and therefore remain an indepen-dent component:
STANDARDS FOR HYDRAULIC STEEL CONSTRUCTION VULCANISATION OR SIMILAR PROCESS
(BONDING MATERIALS ARE NOT COMPARABLE!)
i
BÜSCH angle joints BÜSCH butt joints
All BÜSCH angle joints are vulcanised, according to the re-quirements of the hydraulic steel construction standards.The connecting element used has the same chemical proper-ties as the residual rubber, and forms a unit with it after vulca-nisation.
BÜSCH butt joints (SAFOX®) are butt-welded, which corres-ponds to a similar procedure in accordance with the standards for hydraulic steel construction.An intermediate material is not required, as the thermoplastic properties of the elastomers are sufficient.
buesch.com
Advantages of UNO
2018-10-08|en
