Upload
others
View
23
Download
0
Embed Size (px)
Citation preview
Bulldozer
SD32DDesigned For Desert Environments.
Engine model: Cummins NTA855-C360S10 Rated power : 320 HP 235kW @2000 RPM Operating weight: 38002 kg
OVERALL DIMENSIONS
Semi-U blade
4030
2420
2780
2140
560
1560
1720
4445
3150
4670 1235
865030
0
890
835
80
3540
Designed for Maximum Productivity
Ergonomic Cabin Designed for Optimal Operator Comfort
Stronger Push Force at Lower Costs
Large Dozing Capacity
SD32
D
Bulld
ozer
THE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. THE PICTURES MAY INCLUDE OPTIONS. THE ACTUAL COLOR AND APPEARANCE OF THE PRODUCT MAY DIFFER FROM WHAT IS SHOWN.
DOZER EQUIPMENT
Use of high-tensile-strength steel in moldboard for strengthened blade construction. Hydraulic pipings for blade tilting are housed inside the dozer frame and protected from damage.
Width HeightMax.Tilt Adjust-
mentMax lift height
of bladeMax drop below ground of blade Drop Angle
Weight Dozing Capacity
(mm) (mm) (mm) (mm) (mm) (kg) (m3)
Straight tilt Blade 4130 1590 1000 1560 560 55° 4520 10
Angle Blade 5000 1140 1000 1703 630 55° 4855 6
Semi-U Blade 4030 1725 1000 1560 560 55° 4868 11.9
HYDRAULIC SYSTEMHydraulic control unit:All spool-type control valves housed in hydraulic tank. Gear-type hydraulic pump with a capacity (discharge flow) of 355 Itr./min.Relief valve setting ................................................. .... 140 kg /cm2
Cylinder Number of cylinders Bore
Blade lift 2 140 mm
Blade tilt 1 225 mm
Ripper lift 2 225 mm
Ripper tilt 2 225 mm
Transmission560 mm (22.0") single-grouser shoesHydraulic track adjusters24 V, 35 A alternator24 V, 11 kW electric starting motorAir cleaner inner element lock
Track roller guard (each side)Decelerator pedalSegmented sprocketsDry, horizontal-type air cleaner with pre-cleaner24 V (12 V x 2), 195 Ah batteries
Lower guard (4 pieces)7-roller track frameLighting system (including 1 rear and 4 front lights)Front pull hookIn-line radiator
MULTISHANK RIPPER
Choice of rigid or variable type. Hydraulically controlled parallel-ogram type with 3 shanks. Additional weight (without hydraulic control unit) 3802 kg 4915 kg for variable type.Beam length ..................................................................................2420 mm Max. lift above ground ..................................................................883 mmMax. digging depth ....................................................................... 835 mm
VARIABLE GIANT RIPPER
Variable, parallelogram-type single-shank ripper ideal for digging up hard rocks. Digging angle with stepless adjustability from 34°25' to 60°.Additional weight (without hydrauliccontrol unit) ....................3252 kg Beam length ................................................................................. 1156 mm Max. lift above ground ................................................................ 965 mm Max. drop below ground............................................................1250 mm
ROPS CANOPY
Meets ISO 3471, SAE J1040c and SAE J395a ROPS standards, as well as ISO 3449 FOPS standards.Additional weight with mounting brackets................................1562 kg Steel cab also available.Additional weight (with mounting brackets) ..............................460 kg
This specification sheet may contain attachments and optional equipment that are not available in your area. Please consult your local Shantui distributor for those items you may require.Materials and specifications are subject to change without notice.
TypeAdditional weight
(kg) Ground contact
area (cm2)
560 mm extreme service shoe
460 35280
610 mm single-grous-er shoe
210 38430
660 mm single-grous-er shoe
400 41580
710 mm single-grous-er shoe
620 44730
760 mm single-grous-er shoe
820 47880
ATTACHMENTS AND OPTIONAL EQUIPMENT
STANDARD EQUIPMENT
Shantui Construction Machinery Co., Ltd.
ADDRESS: No. 58 G327 Highway Jining City, Shandong, CHINA
TEL: +86-537-2909351 2909368 2909369 FAX: +86-537-2311219 EMAIL: [email protected]
SD32
D
Bulld
ozer
Advanced Structure
Cummins Engine
Even in the harshest desert conditions, the SD32’s power-to-ground shift works wonders to increase your productiv-ity. The low center of gravity gives it excellent gradeabiltiy in the desert and keeps operator comfort at a maximum even in the roughest terrains, reducing fatigue on the machine and the operator at the same time.
The semi-U dozer blade, sized at 4030mm in width and 1725mm in height, provides a wide swath of dozing capacity (11.7 cubic meters), boosting productivity.
The SD32D was designed with an advanced structure that offers reliable perfor-mance and convenient and flexible operation. A tough undercarriage that still has plenty of “give” in it for shifting desert conditions.
The Cummins NTA855-C360S10 turbo-charged, after-cooled engine meets tremendous power needs at 320 HP (235kW) at 2000 RPM. This direct-injection engine choice provides excellent fuel economy and rapid response to shifting load requirements.
SD32D Bulldozer—Designed for Maximum Productivity in Harsh Desert Conditions
Top-of-the-Line Hydraulics
It comes standard with an advanced hydraulic drive system and hydraulic controls.
Ergonomically Designed Cab
The wide-vision cab, tiltable cushioned seat and easy access control panel and levers make for an operator work environment that brings less fatigue and more productivity.
THE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. THE PICTURES MAY INCLUDE OPTIONS. THE ACTUAL COLOR AND APPEARANCE OF THE PRODUCT MAY DIFFER FROM WHAT IS SHOWN.
THE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. THE PICTURES MAY INCLUDE OPTIONS. THE ACTUAL COLOR AND APPEARANCE OF THE PRODUCT MAY DIFFER FROM WHAT IS SHOWN.
Extraordinary Stability and Traction in Shifting Sands
Large-capacity Blade
ENGINE
Cummins NTA855-C360S10, 4-cycle, water cooled, in-line overhead valve direct injection, turbo-sharged diesel. Rated revolutions of 2000rpm at 235kW power. Six cylinders with bore stroke of 139.7 x 152.4mm, and piston displacement of 14.0101. Minimum fuel consumptions runs at 217 g/kW-h. Maximum torque at 1036/1400 N-m/rpm.
STEERING
FLUIDS CAPACITY
Steering clutch is lubricated, multi-disc, spring loaded, hydraulically separated, hydraulically controlled system. Steering brake is lubricated, floating, direct on-off hydraulic inter-linking system.Min. turning radius..................................................................3.8 m
Coolant ................................................................................... 121 Itr. Fuel tank ........................................................................... ..... 640 ltr. Engine ..................................................................................... 47 Itr. Torque converter, transmission,bevel gear, and steering system..........................................185 ltr. Final drive (each side) ...................................................... .... 55 ltr.
FINAL DRIVE
Two-stage speed reduction of spur gear, with splash lubrica-tion and easy access sprocket points for work site mainte-nance.
UNDERCARRIAGE
Suspension ...................................Oscillation-type equalizer barTrack roller frame .......................................................Box-section,high-tensile-strength steel constructionRollers and idlers .................................. Lubricated track/carrierrollers and idlers are sealed with floating seals.Number of track rollers (each side) .......................................... 7Number of carrier rollers (each side) ....................................... 2Track shoes ...........................Reinforced single-grouser shoes.Unique dust seals for preventing entry of dust into pin-to-bushing clearances for extended service. Track tension eaily adjusted with grease gun.Number of shoes (each side) ................................................... .41Grouser height ................................................................... ... 80 mm Shoe width (standard) ... ....................................................560 mm Ground contact length... ...................................................3150mm Ground pressure (tractor) ................................ ?????0.79 kg/cm2
Weight of machine including all fluids, the operator and stan-dard equipment is approximately 33,078 kg. Operating weight for similar machine with semi-U type blade is 38,002 kg.
OPERATING WEIGHT
SPECIFICATIONS
TRANSMISSION
3-element, single stage, single phase torque converter. Pow-er transmission is planetary gear, multi-disc clutch, hydrau-lically connected and forced lubrication type. Main drive is spiral bevel gear, splash lubricated, with single stage speed reduction. Final drive has 2-stage speed reduction or the spur gear and is splash lubricated.
(Usable pull will depend upon traction and weight of equipped tractor.)
DRAW
BAR
PULL
(100
0Kg)
Forward Reverse
1st 0—3.6 0—4.4
2nd 0—6.6 0—7.8
3rd 0—11.5 0—13.5
TRAVEL SPEED (km/h)
SD32D
Bulld
ozer
High Efficiency Push Factors
This machine is a showcase for our prowess in high efficiency push factors. It’s a medium size, heavy duty machine that will push you forward to greater levels of efficiency and productivity, and at a much lower cost than similarly rated competitor machines.
Ergonomically Designed CabThe wide-vision cab, tiltable cushioned seat and easy access control panel and levers make for an operator work environment that brings less fatigue and more productivity.
Desert-ready Equipment
The SD32D needs no add-ons to start working in desert conditions. It comes out of the factory ready-to-go with a radiator and filters designed specifically for desert conditions.