Download pdf - Bulldozer Engine model: Cummins NTA855-C360S10 SD32D … · 2015. 6. 11. · The Cummins NTA855-C360S10 turbo-charged, after-cooled engine meets tremendous power needs at 320 HP (235kW)

Bulldozer

SD32DDesigned For Desert Environments.

Engine model: Cummins NTA855-C360S10 Rated power : 320 HP 235kW @2000 RPM Operating weight: 38002 kg

OVERALL DIMENSIONS

Semi-U blade

4030

2420

2780

2140

560

1560

1720

4445

3150

4670 1235

865030

0

890

835

80

3540

Designed for Maximum Productivity

Ergonomic Cabin Designed for Optimal Operator Comfort

Stronger Push Force at Lower Costs

Large Dozing Capacity

SD32

D

Bulld

ozer

THE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. THE PICTURES MAY INCLUDE OPTIONS. THE ACTUAL COLOR AND APPEARANCE OF THE PRODUCT MAY DIFFER FROM WHAT IS SHOWN.

DOZER EQUIPMENT

Use of high-tensile-strength steel in moldboard for strengthened blade construction. Hydraulic pipings for blade tilting are housed inside the dozer frame and protected from damage.

Width HeightMax.Tilt Adjust-

mentMax lift height

of bladeMax drop below ground of blade Drop Angle

Weight Dozing Capacity

(mm) (mm) (mm) (mm) (mm) (kg) (m3)

Straight tilt Blade 4130 1590 1000 1560 560 55° 4520 10

Angle Blade 5000 1140 1000 1703 630 55° 4855 6

Semi-U Blade 4030 1725 1000 1560 560 55° 4868 11.9

HYDRAULIC SYSTEMHydraulic control unit:All spool-type control valves housed in hydraulic tank. Gear-type hydraulic pump with a capacity (discharge flow) of 355 Itr./min.Relief valve setting ................................................. .... 140 kg /cm2

Cylinder Number of cylinders Bore

Blade lift 2 140 mm

Blade tilt 1 225 mm

Ripper lift 2 225 mm

Ripper tilt 2 225 mm

Transmission560 mm (22.0") single-grouser shoesHydraulic track adjusters24 V, 35 A alternator24 V, 11 kW electric starting motorAir cleaner inner element lock

Track roller guard (each side)Decelerator pedalSegmented sprocketsDry, horizontal-type air cleaner with pre-cleaner24 V (12 V x 2), 195 Ah batteries

Lower guard (4 pieces)7-roller track frameLighting system (including 1 rear and 4 front lights)Front pull hookIn-line radiator

MULTISHANK RIPPER

Choice of rigid or variable type. Hydraulically controlled parallel-ogram type with 3 shanks. Additional weight (without hydraulic control unit) 3802 kg 4915 kg for variable type.Beam length ..................................................................................2420 mm Max. lift above ground ..................................................................883 mmMax. digging depth ....................................................................... 835 mm

VARIABLE GIANT RIPPER

Variable, parallelogram-type single-shank ripper ideal for digging up hard rocks. Digging angle with stepless adjustability from 34°25' to 60°.Additional weight (without hydrauliccontrol unit) ....................3252 kg Beam length ................................................................................. 1156 mm Max. lift above ground ................................................................ 965 mm Max. drop below ground............................................................1250 mm

ROPS CANOPY

Meets ISO 3471, SAE J1040c and SAE J395a ROPS standards, as well as ISO 3449 FOPS standards.Additional weight with mounting brackets................................1562 kg Steel cab also available.Additional weight (with mounting brackets) ..............................460 kg

This specification sheet may contain attachments and optional equipment that are not available in your area. Please consult your local Shantui distributor for those items you may require.Materials and specifications are subject to change without notice.

TypeAdditional weight

(kg) Ground contact

area (cm2)

560 mm extreme service shoe

460 35280

610 mm single-grous-er shoe

210 38430


400 41580


620 44730


820 47880

ATTACHMENTS AND OPTIONAL EQUIPMENT

STANDARD EQUIPMENT

Shantui Construction Machinery Co., Ltd.

ADDRESS: No. 58 G327 Highway Jining City, Shandong, CHINA

TEL: +86-537-2909351 2909368 2909369 FAX: +86-537-2311219 EMAIL: [email protected]

SD32

D

Bulld

ozer

Advanced Structure

Cummins Engine

Even in the harshest desert conditions, the SD32’s power-to-ground shift works wonders to increase your productiv-ity. The low center of gravity gives it excellent gradeabiltiy in the desert and keeps operator comfort at a maximum even in the roughest terrains, reducing fatigue on the machine and the operator at the same time.

The semi-U dozer blade, sized at 4030mm in width and 1725mm in height, provides a wide swath of dozing capacity (11.7 cubic meters), boosting productivity.

The SD32D was designed with an advanced structure that offers reliable perfor-mance and convenient and flexible operation. A tough undercarriage that still has plenty of “give” in it for shifting desert conditions.

The Cummins NTA855-C360S10 turbo-charged, after-cooled engine meets tremendous power needs at 320 HP (235kW) at 2000 RPM. This direct-injection engine choice provides excellent fuel economy and rapid response to shifting load requirements.

SD32D Bulldozer—Designed for Maximum Productivity in Harsh Desert Conditions

Top-of-the-Line Hydraulics

It comes standard with an advanced hydraulic drive system and hydraulic controls.

Ergonomically Designed Cab

The wide-vision cab, tiltable cushioned seat and easy access control panel and levers make for an operator work environment that brings less fatigue and more productivity.



Extraordinary Stability and Traction in Shifting Sands

Large-capacity Blade

ENGINE

Cummins NTA855-C360S10, 4-cycle, water cooled, in-line overhead valve direct injection, turbo-sharged diesel. Rated revolutions of 2000rpm at 235kW power. Six cylinders with bore stroke of 139.7 x 152.4mm, and piston displacement of 14.0101. Minimum fuel consumptions runs at 217 g/kW-h. Maximum torque at 1036/1400 N-m/rpm.

STEERING

FLUIDS CAPACITY

Steering clutch is lubricated, multi-disc, spring loaded, hydraulically separated, hydraulically controlled system. Steering brake is lubricated, floating, direct on-off hydraulic inter-linking system.Min. turning radius..................................................................3.8 m

Coolant ................................................................................... 121 Itr. Fuel tank ........................................................................... ..... 640 ltr. Engine ..................................................................................... 47 Itr. Torque converter, transmission,bevel gear, and steering system..........................................185 ltr. Final drive (each side) ...................................................... .... 55 ltr.

FINAL DRIVE

Two-stage speed reduction of spur gear, with splash lubrica-tion and easy access sprocket points for work site mainte-nance.

UNDERCARRIAGE

Suspension ...................................Oscillation-type equalizer barTrack roller frame .......................................................Box-section,high-tensile-strength steel constructionRollers and idlers .................................. Lubricated track/carrierrollers and idlers are sealed with floating seals.Number of track rollers (each side) .......................................... 7Number of carrier rollers (each side) ....................................... 2Track shoes ...........................Reinforced single-grouser shoes.Unique dust seals for preventing entry of dust into pin-to-bushing clearances for extended service. Track tension eaily adjusted with grease gun.Number of shoes (each side) ................................................... .41Grouser height ................................................................... ... 80 mm Shoe width (standard) ... ....................................................560 mm Ground contact length... ...................................................3150mm Ground pressure (tractor) ................................ ?????0.79 kg/cm2

Weight of machine including all fluids, the operator and stan-dard equipment is approximately 33,078 kg. Operating weight for similar machine with semi-U type blade is 38,002 kg.

OPERATING WEIGHT

SPECIFICATIONS

TRANSMISSION

3-element, single stage, single phase torque converter. Pow-er transmission is planetary gear, multi-disc clutch, hydrau-lically connected and forced lubrication type. Main drive is spiral bevel gear, splash lubricated, with single stage speed reduction. Final drive has 2-stage speed reduction or the spur gear and is splash lubricated.

(Usable pull will depend upon traction and weight of equipped tractor.)

DRAW

BAR

PULL

(100

0Kg)

Forward Reverse

1st 0—3.6 0—4.4

2nd 0—6.6 0—7.8

3rd 0—11.5 0—13.5

TRAVEL SPEED (km/h)

SD32D

Bulld

ozer

High Efficiency Push Factors

This machine is a showcase for our prowess in high efficiency push factors. It’s a medium size, heavy duty machine that will push you forward to greater levels of efficiency and productivity, and at a much lower cost than similarly rated competitor machines.

Ergonomically Designed CabThe wide-vision cab, tiltable cushioned seat and easy access control panel and levers make for an operator work environment that brings less fatigue and more productivity.

Desert-ready Equipment

The SD32D needs no add-ons to start working in desert conditions. It comes out of the factory ready-to-go with a radiator and filters designed specifically for desert conditions.