Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
1
System
Cable Distribution Cabinets from SystemGEYER are suitable for a very wide range of applications. Their modular design makes it possible. There are four widths, threeheights and five different pedestals available.
The versions available with asymmetrical doorsmean that many different applicationscould be covered. They are regularlyused for many telecommunications
uses, broad band cable networks and alsoenergy metering applications.
Size 00/845Size 0/845 – 0/1355Size 1/845 – 1/1355Size 2/845 –2/1355
with asymmetrical doors Size 1/845/1005/1355Size 2/845/1005/1355
Cable Distribution Cabinets
Features
Various applications possible due to modular system
4 sizes, 3 heights, 5 kinds of pedestals
Types with asymmetric doors
2
System
Advantages
Enclosures in modern ripped design avoids undesired poster
Easy exchance of damaged parts
Labyrinthic slots for life part protection
Pedestal with standard site opening
Locking handle with double locking system, one locking cylinder included
Door opening angle 180°
Doors with 3-point locking system
modernribbed surface
easy exchangeif parts get damaged
expected break area incase of crash
Flush fitted lockingdevice made of highimpact material.
On request one or twolocking cylinders.
Cabinets size 2 onrequest both doorswith seperate lockinghandle.
Doors can beunhinged easily
Door hinge left andright possible withoutalteration
Door opening angle180° (90° when 2cabinets are fittednext to each other)
Opening inthe side on request
Various types ofpedestals, e.g.flood type, forconcrete mountingor wall pedestal.
Cable Distribution Cabinets
3
System
Cable Distribution Cabinets
Technical specifications:
• Protection degree IP43 on special request IP44 with accessories
Colour
Lightgrey according to RAL 7035
Dimensions:
• Cable Distribution Cabinets according to DIN 43629CDC size 0/845 - HxWxD (mm) 845 x 585x315CDC size 1/845 - HxWxD (mm) 845 x 780x315CDC size 2/845 - HxWxD (mm) 845x1110x315
• Cable Distribution Cabinets according to DIN 43629, part 1CDC size 0/1005 - HxWxD (mm) 1005x 585x315CDC size 0/1355 - HxWxD (mm) 1355x 585x315CDC size 1/1005 - HxWxD (mm) 1005x 780x315CDC size 1/1355 - HxWxD (mm) 1355x 780x315CDC size 2/1005 - HxWxD (mm) 1005x1110x315CDC size 2/1355 - HxWxD (mm) 1355x1110x315
• Cable Distribution CabinetsCDC with pedestal size 00/845 - HxWxD (mm) 1745x 480x315
Locking device
Three point locking system suitable for:one or two cylinders with key or triangular lock or square lock
Standard pedestal
• Side opening ∅ 55mm for temporary connection. This opening can be closed from inside after using.
• With cable support bar angle iron 40x40x3mm for fixing clamps.• Cast iron base plate with rods to adjust the pedestal on the base
plate (see accessories page H3-44)
Pedestal for concrete mounting
• Side opening ∅ 55mm for temporary connection. This opening can be closed from inside after using.
• The pedestal is fixed onto the ground by 4 bolts.
Cabinet
• Modern ripped surface design• Easy replacement of damaged parts (e.g. sidewalls, roof)• Recycable because no pressed metal parts used in the enclosure
Doors
• Door opening angle 180° (90° when 2 cabinets are fitted next to each other)
• Doors are easily to put on ist hinges and to take off• Door hinge left and right possible without alteration• DIN size 2 cabinets can be supplied with 2 seperate and
independent lockable doors
Ventilation
On bottom and top side of the cabinet there are labyrinthine slots
Basement
To reduce condensation water inside the cabinet it is recomended tofill the pedestal up the height of the cable support bar angle iron witha filling compound.The filling compound (25l plastic bag Reference No. 95075; see page H3-44) should be filled in approx. 200-300mm.Required qty. DIN size 00 - 2 plastic bags ;
DIN size 1 and 2 - 3 plastic bags
CDCs with assymetric doors
CDCs with assymetric doors have a mounting plate factory fitted andalso got a seperation wall inbetween the 2 doors.Both doors have an independent double locking system with 1 profilecylinder (second cylinder can be retrofitted).
CDC-type space behind door H x W (mm)left right
SL 081 V 740 x 286 740 x 416SL 082 V 740 x 274 740 x 757SL 101 V 900 x 286 900 x 416SL 102 V 900 x 274 900 x 757SL 131 V 1250 x 286 1250 x 416SL 132 V 1250 x 274 1250 x 757
4
System
Distribution Cabinets
Product range
Size 00 / Height 845
Size 0 / Height 845 Height 1005 Height 1355
Size 1 / Height 845 Height 1005 Height 1355
Size 2 / Height 845 Height 1005 Height 1355
5
System
* Mounting depth in locking area
Note:CDCs with busbar systems not being fully fitted with built-in units it isrecommended to cover these empty spaces with a protection cover.For built-in units and protection-covers see page H3-41.
Cable Distribution Cabinets
Size 00/Height 845
Empty cabinet, single door SL 084
Cabinet with mounting plate, single door SL 084 PHxWxD (mm) 750x358x6 (PVC)
Cabinet with busbar-system, single door SK 084 GAE-Cu 30 x 6 mm (4-wire)max. 4 built-in units of 100mm width
Standard pedestal (kit) size 00 (900 mm) SX 004
Proposed accessories: for CDC size 00 filling compound 2 x 95075, ground grid 69756 or ground grid with adjustment rods 69769
Type Reference-No.
Cabinet bearing area
6
System
* Mounting depth in locking area
Note:CDCs with busbar systems not being fully fitted with built-in units it isrecommended to cover these empty spaces with a protection cover.For built-in units and protection-covers see page H3-41.
Cable Distribution Cabinets
Size 0/Heigth 845
Empty cabinet, single door SL 080
Cabinet with mounting plate, single door SL 080 PHxWxD (mm) 750x500x6 (PVC)
Cabinet with busbar-system, single door SK 080 GAE-Cu 30 x 6 mm (4-wire)max. 5 built-in units of 100mm width
Standard pedestal (kit) size 0 (900 mm) SX 005
Higher pedestal flood type (kit) size 0, SX 030(height 1125 mm)
Pedestal for concrete mounting size 0 SX 014
Wall pedestal size 0 with coverplate SX 011and 4 cable entries with stepped gasket for cable 50–185 mm2
Proposed accessories: for CDC size 0 filling compound 2 x 95075, ground grid 69757 or ground grid with adjustment rods 69770
Type Reference-No.
7
System
Cable Distribution Cabinets
Size 0/Height 1005
Empty cabinet, single door SL 100
Cabinet with mounting plate, single door SL 100 PHxWxD (mm) 895x491x6 (PVC)
Cabinet with busbar-system, single door SK 100 GAE-Cu 30 x 6 mm (4-wire)max. 4 built-in units of 100mm width
Standard pedestal (kit) size 0 (900 mm) SX 005
Higher pedestal flood type (kit) size 0, SX 030(height 1125 mm)
Pedestal for concrete mounting size 0 SX 014
Wall pedestal size 0 with coverplate SX 011and 4 cable entries with stepped gasket for cable 50–185 mm2
Proposed accessories: for CDC size 0 filling compound 2 x 95075, ground grid 69757 oder ground grid with adjustment rods 69770
Type Reference-No.
* Mounting depth in locking area
Note:CDCs with busbar systems not being fully fitted with built-in units it isrecommended to cover these empty spaces with a protection cover.For built-in units and protection-covers see page H3-41.
8
System
Cable Distribution Cabinets
Size 0/Height 1355
Empty cabinet, single door SL 130
Cabinet with mounting plate, single door SL 130 PHxWxD (mm) 1245x491x6 (PVC)
Standard pedestal (kit) size 0 (900 mm) SX 005
Higher pedestal flood type (kit) size 0, SX 030(height 1125 mm)
Pedestal for concrete mounting size 0 SX 014
Wall pedestal size 0 with coverplate SX 011and 4 cable entries with stepped gasket for cable 50–185 mm2
Proposed accessories: for CDC size 0 filling compound 2 x 95075, ground grid 69757 or ground grid with adjustment rods 69770
Type Reference-No.
* Mounting depth in locking area
Note:CDCs with busbar systems not being fully fitted with built-in units it isrecommended to cover these empty spaces with a protection cover.For built-in units and protection-covers see page H3-41.
9
System
Cable Distribution Cabinets
Size 1/Height 845
Empty cabinet, single door SL 081
Cabinet with mounting plate, single door SL 081 PHxWxD (mm) 750x658x6 (PVC)
Cabinet with busbar-system, single door SK 081 GAE-Cu 30 x 6 mm (4-wire)max. 7 built-in units of 100mm width
CDC with asymmetrical doors SL 081 Vand mounting plate750 x 658 x 6 mm (PVC)on request:fixing onto a pedestal for temporary outdoor installation (SX009)
Standard pedestal (kit) size 1 (900 mm) SX 006
Higher pedestal flood type (kit) size 1, SX 031(height 1125 mm)
Pedestal for concrete mounting size 1 SX 015
Wall pedestal size 1 with coverplate SX 012and 6 cabel entries with stepped gasket for cabel 50–185 mm2
Proposed accessories: for CDC size 1 filling compound 3 x 95075, ground grid 69758 or ground grid with adjustment rods 69771
Type Reference-No.
* Mounting depth in locking area
Note:CDCs with busbar systems not being fully fitted with built-in units it isrecommended to cover these empty spaces with a protection cover.For built-in units and protection-covers see page H3-41.
10
System
Cable Distribution Cabinets
Size 1/Height 1005
Empty cabinet, single door SL 101
Cabinet with mounting plate, single door SL 101 PHxWxD (mm) 895x686x6 (PVC)
Cabinet with busbar-system, single door SK 101 GAE-Cu 30 x 6 mm (4-wire)max. 7 built-in units of 100mm width
CDC with asymmetrical doors SL 101 Vand mounting plate HxWxD (mm) 895x686x6 (PVC)on request:fixing onto a pedestal for temporary outdoor installation (SX009)
Standard pedestal (kit) size 1 (900 mm) SX 006
Higher pedestal flood type (kit) size 1, SX 031(height 1125 mm)
Pedestal for concrete mounting size 1 SX 015
Wall pedestal size 1 with coverplate SX 012and 6 cabel entries with stepped gasket for cabel 50–185 mm2
Proposed accessories: für CDC size 1 filling compound 3 x 95075, ground grid 69758 oder ground grid with adjustment rods 69771
Type Reference-No.
* Mounting depth in locking area
Note:CDCs with busbar systems not being fully fitted with built-in units it isrecommended to cover these empty spaces with a protection cover.For built-in units and protection-covers see page H3-41.
11
System
Cable Distribution Cabinets
Size 1/Height 1355
Empty cabinet, single door SL 131
Cabinet with mounting plate, single door SL 131 PHxWxD (mm) 1245x686x6 (PVC)
CDC with asymmetrical doors SL 131 Vand mounting plateHxWxD (mm) 1245x686x6 (PVC)on request:fixing onto a pedestal for temporary outdoor installation (SX009)
Standard pedestal (kit) size 1 (900 mm) SX 006
Higher pedestal flood type (kit) size 1, SX 031(height 1125 mm)
Pedestal for concrete mounting size 1 SX 015
Wall pedestal size 1 with coverplate SX 012and 6 cable entries with stepped gasket for cable 50–185 mm2
Proposed accessories: for CDC size 1 filling compound 3 x 95075, ground grid 69758 or ground grid with adjustment rods 69771
Type Reference-No.
* Mounting depth in locking area
Note:CDCs with busbar systems not being fully fitted with built-in units it isrecommended to cover these empty spaces with a protection cover.For built-in units and protection-covers see page H3-41.
12
System
Cable Distribution Cabinets
Size 2/Height 845
Empty cabinet, double door SL 082
Cabinet with mounting plate, double door SL 082 PHxWxD (mm) 750x988x6 (PVC)
Cabinet with busbar-system, double door SK 082 GAE-Cu 30 x 8 mm (4-wire)max. 10 built-in units of 100mm width
CDC with asymmetrical doors SL 082 Vand mounting plateHxWxD (mm) 750x988x6 (PVC)on request:fixing onto a pedestal for temporary outdoor installation (SX010)
Standard pedestal (kit) size 2 (900 mm) SX 007
Higher pedestal flood type (kit) size 2 SX 032(height 1125 mm)
Pedestal for concrete mounting size 2 SX 016
Wall pedestal size 2 with coverplate SX 013and 9 cable entries with stepped gasket for cable 50–185 mm2
Proposed accessories: for CDC Size 2 filling compound 3 x 95075, ground grid 69759 or ground grid with adjustment rods 69772
Type Reference-No.
* Mounting depth in locking area
Note:CDCs with busbar systems not being fully fitted with built-in units it isrecommended to cover these empty spaces with a protection cover.For built-in units and protection-covers see page H3-41.
13
System
Cable Distribution Cabinets
Size 2/Height 1005
Empty cabinet, double door SL 102
Cabinet with mounting plate, double door SL 102 PHxWxD (mm) 895x1016x6 (PVC)
Cabinet with busbar-system, double door SK 102 GAE-Cu 30 x 8 mm (4-wire)max. 10 built-in units of 100mm widthn
CDC with asymmetrical doors SL 102 Vand mounting plate HxWxD (mm) 895x1016x6 (PVC)on request:fixing onto a pedestal for temporary outdoor installation (SX010)
Standard pedestal (kit) size 2 (900 mm) SX 007
Higher pedestal flood type (kit) size 2 SX 032(height 1125 mm)
Pedestal for concrete mounting size 2 SX 016
Wall pedestal size 2 with coverplate SX 013and 9 cable entries with stepped gasket for cable 50–185 mm2
Type Reference-No.
Proposed accessories: for CDC Size 2 filling compound 3 x 95075, ground grid 69759 or ground grid with adjustment rods 69772
* Mounting depth in locking area
Note:CDCs with busbar systems not being fully fitted with built-in units it isrecommended to cover these empty spaces with a protection cover.For built-in units and protection-covers see page H3-41.
14
SystemSize 2/Height 1355
Empty cabinet, double door SL 132
Cabinet with mounting plate, double door SL 132 PHxWxD (mm) 1245x988x6 (PVC)
CDC with asymmetrical doors SL 132 Vand mounting plate HxWxD (mm) 1245x988x6 (PVC)on request:fixing onto a pedestal for temporary outdoor installation (SX010)
Standard pedestal (kit) size 2 (900 mm) SX 007
Higher pedestal flood type (kit) size 2 SX 032(height 1125 mm)
Pedestal for concrete mounting size 2 SX 016
Wall pedestal size 2 with coverplate SX 013and 9 cable entries with stepped gasket for cable 50–185 mm2
Cable Distribution Cabinets
Type Reference-No.
Proposed accessories: for CDC Size 2 filling compound 3 x 95075, ground grid 69759 or ground grid with adjustment rods 69772
* Mounting depth in locking area
Note:CDCs with busbar systems not being fully fitted with built-in units it isrecommended to cover these empty spaces with a protection cover.For built-in units and protection-covers see page H3-41.
15
System
Ordering example for Size 0/Height 845
5 Built-in units maximum
consisting of:1xCabel distribution cabinet size 0 SK 080 GA
with busbar-system1xStandard pedestal SX 005
(kit) size 0 (900 mm)
requiredExample space
1xHRC-fuse strip with disconnector, size 2 12xHRC-load fuse strip, size 2 EH 241 AAG 21xHRC-fuse strip, size 2 EH 212 CAB 11xHRC-load fuse strip, size 00 EH 041 CAD 0,51xHRC-fuse strip, size 00 EH 052 CAD 0,51xAdapter set with insulating protection 75950
Ordering example for Size 1/Height 845
7 Built-in units maximum
consisting of:1xCabel distribution cabinet size 1 SK 081 GA
with busbar-system1xStandard pedestal SX 006
(kit) size 1 (900 mm)
requiredExample space
1xHRC-fuse strip with disconnector, size 2 11xHRC-load fuse strip, size 2 EH 241 CAC 12xHRC-fuse strip, size 2 EH 212 CAB 12xHRC-load fuse strip, size 00 EH 041 CAD 11xAdapter set with insulating protection 759502x HRC-fuse strip, size 00 EH 052 CAD 11xAdapter set with insulating protection 75950
Alternative combinations: The cable distribution cabinets can beequipped with all kind of built-in units.
1 built-in unit consits of:1x HRC-fuse strip with disconnector, size 2
or 1x HRC load fuse strip, size 2or 1 x HRC fuse strip, size 2or 2 x HRC load fuse strip, size 2
(Adapter set required)or 2 x HRC fuse strip, size 2 or (Adapter set required)or 1 x direct connection via srews, bolts and direct
termination
Cable Distribution Cabinets
16
System
HRC fuse strips may only be used by authorized technicians or electrotechnically instructed persons.Locked doors are required for distribution cabinets.
Size 3
HRC-Fuse strips EH 341 AABSize 3, 630A - 690V1-pole switchableScrew connection M12 x 30Incoming coverMaterial to fix on busbars
HRC Load Fuse strips EH 343 AABSize 3, 630A - 690V3-pole switchableScrew connectionM12 x 30Incoming coverMaterial to fix on busbars
Size 1 and 2
HRC Load Fuse strips EH 241 AAGSize 2, 400A-690V1-pole switchableScrew connection M12 x 35Incoming coverMaterial to fix on busbars
HRC Load Fuse strips EH 241 CACSize 2, 400A-690V1-pole switchableV-direct terminals 35-240 mm2, seIncoming coverMaterial to fix on busbars
HRC Load Fuse strips EH 243 AABSize 2, 400A-690V3-pole switchableScrew connection M12 x 30Incoming coverMaterial to fix on busbars
HRC-Fuse strips EH 231 CAASize 2, 400A-690VV-direct terminals 35-240mm2, seIncoming cover, fuse link coverMaterial to fix on busbars
with body cover EH 232 CABU-shaped, 1000mm wide
Shroud above busbars 47930symmetric H x B (mm) 560 x 102
Size 00
HRC-Fuse strips EH 041 AAC*Size 00, 160A-690V1-polig schaltbarScrew connection M8 x 20Incoming coverConnection material
HRC-Fuse strips EH 041 CAD*Size 00, 160-690V1-pole switchableV-shaped framedirect terminals 10-95mm2, seIncoming coverConnection material
HRC-Fuse strips EH 052 AAC*Size 00, 160A-690VScrew connection M8 x 20Incoming cover, fuse link coverConnection material
HRC-Fuse strips EH 052 CAD*Size 00, 160A-690VV-shaped framedirect terminals 10-95mm2, seIncoming cover, fuse link coverConnection material
* Adapter set required for mounting
Required for HRC-Fuse strips, size 00
Adapter set with insulated protectioncover to fit on the space of a built-in unit load fuse strip size 2, a built-in unit of 2 load fuse strips size 00
with steel frame V-clamps 7595010–95mm2 Al/Cu (for PEN)
with screw connection 75952M8 x 20 (for PEN)
Cabinets and Pillars
HRC-Fuse Strips
Type Reference-No. Type Reference-No.
17
System
Cabinets and Pillars
Connections
Direct termination 44630for aluminium and cooper conductors with mounting screw M12x55 (1pcs)scope of termination:50mm2, re35–70mm2, rm50–185mm2,se35–150mm2,sm
Direct termination 44631for aluminium and cooper conductors with mounting screw M12x55 (1pcs)scope of termination:2x 50mm2, re2x 35–70mm2, rm2x 50–185mm2, se2x 35–150mm2, sm
Direct termination 69993Steelframe-V-terminal for Al- andCu conductors with V-shapedcontact-flags and connecting screwsscope of termination:16–150mm2, re16–150mm2, rm35–240mm2, se35–240mm2, sm
Shroud above busbars 60138for direct terminations H x W (mm) 750 x 100
Type Reference-No.
The feeding can also be realized through NH00 and Nh2 fuse strips.
18
System
Double locking 78842complete (without locking cylinder)
Locking devices 50994Half cylinder with 2 keys
Spare partOnly the key 50995
Ground grid for polyester pedestalswith screw M10 forearth connection with 2 clamping straps
for cable distribution cabinetsCDC size 00 69756CDC size 0 69757CDC size 1 69758CDC size 2 69759
for pillarsType162 90224Type 115/135/
152/172/202 90216Type 155/175/205 69757Type 157/177/207
Ground grid for polyester pedestalswith screw M10 forearth connection with 2 clamping strapswith adjustment roots
for cable distribution cabinetsCDC size 00 69769CDC size 0 69770CDC size 1 69771CDC size 2 69772
for pillarsType 162 90226Type 115/135/
152/172/202 90218Type 155/175/205 69770Type 157/177/207 69771
Filling compound 95075Plastic bagwith 25 l absorber stones.To reduce condensation water inside of the cabinet.
Type of cabinet required quantity
115, 135, 142, 1 bag152, 153, 154162, 172, 173, 202
size 00, size 0 2 bags155, 175, 176, 205
size 1, size 2 3 bags157, 177, 207
The filling height should be approximately 200–300mm
Type Reference-No.Type Reference-No.
Spare parts and accessories
Spare parts and accessories for cabinets and pillars
lock lid
locking cylinder
dummy insert, black
or
blank locking grey
lock handle
lock housing
locking cylinderwith two keys
19
System
Spare parts and accessories
Spare parts and accessories for cabinets and pillars
Meter coverIP54 sealableretrofit375mm without door SY 375 A375mm with door SY 375 AT
450mm without door SY 450 A450mm with door SY 450 AT
Cover for multi-rate tariff deviceIP54 sealableretrofit300mm without door SY 300 A
Cover DY 57308 Asealable,with cable-end insulation(for meterplate outlet)
Blank piece RAL 9002 DY 69 Xlength 216 mm 1 set = 10 pieces
Blank piece DY 95032 Alockable
Cover 49626 for temporary connection side opening ∅ 55mm of SL 152/155/157/172175/202/205/207
Intermediate slider DY 56132 W(e. g. when different tariffs)
Seperation wall DY 54694 Wperforatedfor vertical seperation ofdifferent tariffgroups formod. devices 68/85mm
Seperation wall DY 37205 Wfor vertical seperationfixing on 2 DIN rails230mm longusage in 300mmdistribution area
Flanges see page H3-10.Terminals see page H5-4.
Cable-end insulating set DY 56814 Afor crimped cables 10mm2
(7 pieces)
Bag for wiring diagrams 55696DIN A4
Heating 33W 55517thermostatically controlled
Lighting fitting 75924with switch and socket outlet "Schuko"for cabinets DIN size 00 - 2
Door stopper 69846limitates the door opening at approx. 110°
Main MCBE=Exact-Charakteristic, 25kAacc. to DIN VDE 0641,05...1,2 . In20A XHA120-425A XHA125-432A XHA132-435A XHA135-440A XHA140-450A XHA150-463A XHA163-480A XHA190-4100A XHA199-4
Main MCB with busbar adapter3 x 1-poleE=Exact-Charakteristic, 25kAacc. to DIN VDE 0641,05...1,2 . In25A XKS325-435A XKS335-440A XKS340-450A XKS350-463A XKS363-4
Type Reference-No.Type Reference-No.