USER MANUAL

1

Camera IP

| H-963 ; 78-772# |

| H-250 ; 78-773# |

| H-257 ; 78-770# |

| H-258 ; 78-771# |

USER MANUAL

2

Connecting the Hardware Conecting Wi-Fi.

Connecting via network cable

Device Connection 1. Near the wireless router, plug one end of the enclosed power adapter into the power jack of the

camera, and the other end of the power adapter into the wall outlet.

2. When camera finishes rotating and Ding-Dong tone coming out, it means that IP camera is waiting

for receiving Wi-Fi signal (if you connect the camera with Ethernet cable, there will not be any

Ding-Dong tone coming out from camera).

3. Make Wi-Fi available on your mobile phone.

Note: when the IP camera is in the initial state, there is Ding-Dong tone coming out from it. Here are three methods to suspend the Ding-Dong tone:

1. connect your IP camera to the router with Ethernet cable;

2. connect your IP camera to the router via smart-config;

3. power off the IP camera.

USER MANUAL

3

Downlad and Install App

Android users can search IPCAM P from Google Play store, or just scan the QR-code below to download the App.

iOS users can download IPCAM P from App Store.

After installing, the icon will pop up on the mobile phone.

Add Camera

1. Run the IPCAM P App. Click on on the home screen, then click on “Add manually”. Please click

on “Next” from the first option “Wi-Fi SmartConfig”.

(1-1) (1-2)

USER MANUAL

4

2. Confirm that you already followed instructions to be as picture 2-1. The app. will automatically select the Wi-Fi network. Input Wi-Fi password and click on “Setting”, then it

will be in configuration process as picture 2-2..

(2-1) (2-2)

(2-3)

Tips for Wi-Fi Smart-config:

The camera only supports the 2.4 GHz wireless spectrum. If your mobile phone is connected to 5.0 GHz wireless spectrum, please switch to the 2.4 GHz one.

USER MANUAL

5

3. When Ding-Dong ring tone stopped, please select the device UID number as picture 3-1,

consider a name for your camera and click on “Add” as picture 3-2.

(3-1) (3-2)

4. Once the camera was added, you will be redirected to the home screen, where you can view the camera. Click on the video, it could be shown solely. Click on < on the top for

return .

`

(4-3) (4-4)

USER MANUAL

6

Advance settings

5. As picture 5-1, tap , to get function list bar and tap , navigating into advanced

settings, you can change password, set up motion detection, recording etc

(5-1) (5-2)

(5-3) (5-4)

USER MANUAL

7

Change password camera

6. In the "Advanced Settings" menu (picture 5-1) Click "Modify Security Code" (picture

6-1), enter the old password in the "Old", the default password is admin. In the "New"

enter new password, in the "Confirm" enter new password again, then click OK. The

password will be changed.

(6-1) (6-2)

The program will go to edit camera settings view.

Make a re-connection to watch real-time video transmission.

USER MANUAL

8

Settings connect Wi-fi

7. From the "Advanced Settings" menu, click "Wi-Fi Network Management”

(picture 7-1), expand the list of available Wi-Fi networks, choice and click (pcture 7-2),

In the next window, enter the password for the selected Wi-Fi network and press "OK"

(Picture 7-3). Correctly adding a camera to a WiFi network is shown in picture 7-4. The

name of the Wi-Fi network and "connected”.

You can remove the Ethernet cable. For a moment the camera preview will be

unavailable and will reappear after the camera switches to a Wi-Fi connection.

(7-1) (7-2)

(7-3) (7-4)

USER MANUAL

9

Motion decetion

8. From the "Advanced Settings" menu, "Event settings" (picture 8-1), expand the menu

(picture 8-2) and select the motion detection sensitivity. Off sensor ("Off") to the

maximum sensitivity ("Max"). The higher the sensitivity, the more the camera will

record. In the "Notification" menu in the list (Picture 8-3) you can choose the type of

event / alarm notification. When set to sensitivity, the camera may sound a beep..

(8-1) (8-2)

(8-3)

USER MANUAL

10

Recording SD card

9. The SD card's recording function is only available when the SD card is mounted in the

device. From the "Recording Settings" menu. Select one of the options from the list

(Picture 9-1). OFF (turn off recording), All time (continuous recording in 24 hour

mode), Alarm (motion video recording). If the space on the SD card is full, the

camcorder automatically overwrites the oldest recordings.

(9-1)

Play records SD card

10. After a successful video recording setup. On the SD cards will display video records 10

minutes time, or alarm records. To check the recording, go back to the main screen and

click "Recording Files" (picture 10-1). In the list (pigure 10-2), select the video with the

specified time and type of recording to play it.

(9-3) (9-4)

USER MANUAL

11

Made in ChRL for:

PROLECH R. i S. Leszek Sp. J.

Stary Puznów 58B

08-400 Garwolin, Polska

www.blow.com.pl

Service:

Serwis BLOW

Stary Puznów 58B

08-400 Garwolin, Polska

serwis@prolech.com.pl

www.blow.com.pl

Electrical equipment marked with a crossed-out wheelie bin

symbol cannot be disposed of with municipal waste. Such

equipment is subject to collection and recycling.

www.blow.pl | www.prolech.com.pl