CameraLink SELECTOR / DISTRIBUTOR / REPEATER

This unit works as a digital signal selector (also available as a distributor or a repeater) for 2 devices which is compliant with CameraLink Base Configurationstandard. When using as a selector, image processing board can be used efficiently by switching input depend on devices. As a distributor, parallel processing by 2 distributing output is available when setting in image processing system.

Overview

Features

MODE and SELECT of input panel

- For control signal(CC1-CC4) and Communication Line(SerTFG,Ser TC) specified with CameraLink Base Configuration, input/output can be changed by the switch on input panel. Switching by external control signal is also available.- Providing pre-emphasis function to improve signal jitter. It can be used as a repeater to extend CameraLink cable.

MODED=Distributor R=RepeaterS=Selector

SELECTMODE=SA - LED lights green and INPUT A is selected.B - LED lights umber and INPUT B is selected.MODE=DA - LED lights green and CC1-CC4 of OUTPUT A and SERTC,SERFG are selected and connected.B - LED lights umber and OUTPUT B is selected.

Input/Output signalREMOTE inputCamera clockPower supply/consumptionTemperature/HumiditySizeWeightAccessories

株式会社スタック〒350-1306 埼玉県狭山市富士見1-22-3TEL: 04-2959-7585 FAX: 04-2957-3347URL: http://www.stac.co.jp/

CameraLink Base Configuration 2 input / 2 output0-5V TTL level connector : HR10A-7R-6P(HIROSE)66MHz(MAX)DC 5V/ 5W (with attached AC adapter)0°C-40°C, 0%-80% (no condensation)150(W)×36(H)×80(D)mm0.6 kgAC adapter x 1, Instruction manual x 1

Specifications

Output panel

STAC Corporation1-22-3, Fujimi, Sayama-shi, Saitama, 350-1306 JAPANTEL: 81-4-2959-7585 FAX: 81-4-2957-3347URL: http://www.stac.co.jp/

Switch MODE to use as a distributor, a repeater or a selector.

Distributor modeDistributor

SelectorSelector mode

* Product appearance and specifications are subject to change without notice.

CLSD-650

画像処理ボードCameraLink compatible camera

System connection example

RepeaterRepeater mode

CLSD-650Image processing device

Image processing device

Image processing device

CameraLink compatible cable

CameraLink compatible cable

CameraLink compatible cable

CameraLink compatible cable

CameraLink compatible camera

CLSD-650

CameraLink compatible camera

CameraLink compatible cable

CameraLink compatible cable

PEM (Pre emphasis) Improve jitter of signal.3 staged level change.Activate when extend cable length.

DC 5V IN

REMOTEWhen SELECT SW is in the center（LED=red light),INPUT A,B is selectable by control signal. When MODE is D, CC1-CC4 of OUTPUT A,B and SERTC,SERFG is selectable by control signal.

REMOTE and PEM switch

Image processing device