CATALOG Inductors - Panasonic · ETQ P5M Y ETQ P6M Y ... Safety Precautions (PCC for automotive use) 49 PCC-M0730L (MC) for consumer use ETQ P3L 51 PCC-M0740L (MC) Low DCR Type for

InductorsProducts Catalog

2020

g

2020.3

PCC-M0530M/M0540M M0630M/M0645M M0754M/M0750M M0854M/M0850M M1054M/M1050M M1050ML/M1060ML (MC)

PCC-M0854MS/M1050MS (MC)

PCC-M1280MF (MC) ETQ P8M□□□JFA PCC-M0530M-LP/M0630M-LP ETQ P3M□□□KV□ M0840M-LP/M1040M-LP (MC) ETQ P4M□□□KV□ PCC-M0648M-LE ETQ P4M□□□KFN

M0748M-LE (MC) ETQ P4M□□□KFM PCC-M0530M-H M0630M-H (MC) PCC-D1413H (DUST) ETQ PDH240DTV　Soldering Conditions (Power Choke Coils (Automotive Grade))　Safety Precautions (Common precautions for Power Choke Coils (Automotive Grade)) PCC-M0730L (MC) ETQ P3L PCC-M0740L (MC) Low DCR Type ETQ P4L PCC-M1040L (MC) ETQ P4L PCC-M1040L (MC) Low DCR Type ETQ P4L PCC-M1250L (MC) ETQ P5L　Packaging Methods ∙ Soldering Conditions（Power Choke Coils (Consumer use) )　Safety Precautions (Common precautions for Power Choke Coils (Consumer use))

　Chip ELT 3KN

49

Inductors CONTENTSProduct ltem Type ∙ Series Part Number Page

Power ChokeCoils

(AutomotiveGrade)

　ETQ P3M□□□Y□□　ETQ P4M□□□Y□□　ETQ P5M□□□Y□□　ETQ P6M□□□Y□□

1

ETQ P5M□□□YSK ETQ P5M□□□YSC

17

20

25

37

ETQ P3M□□□HF□ 44

5253

Power ChokeCoils

(Consumer use)

55575961636567

Voltage Step-upCoils 69

02　　Feb. 2020

Power Inductors

Power Choke Coil (Automotive Grade)SeriesPCC-M0530M、M0540M PCC-M0854M、M0850MPCC-M0630M、M0645M PCC-M1054M、M1050MPCC-M0754M、M0750M PCC-M1050ML、M1060ML

High heat resistance and high reliability using metal composite core (MC)

Industrial Property : patents 21 (Registered 2/Pending 19)

●High heat resistance : Operation up to 150 °C including self-heating ●Fig.1 ●High-reliability : Inductance v.s. DC current, Temp. High vibration resistance as result of newly developed ETQP5M470YFM (reference) integral construction; under severe reliability conditions of automotive and other strenuous applications●High bias current : Excellent inductance stability using ferrous alloy magnetic material (Fig.1)●Temp. stability : Excellent inductance stability over broad temp. range (Fig.1)●Low audible (buzz) noise : A gapless structure achieved with metal composite core●High efficiency : Low DC resistance of winding and low eddy-current loss of the core●Shielded construction●AEC-Q200 compliant●RoHS compliant

Recommended Applications ●Noise filter for various drive circuitry requiring high temp. operation and peak current handling capability●Boost-Converter, Buck-Converter DC/DC

Standard Packing Quantity (Minimum Quantity/Packing Unit) ● 1,000 pcs/box （2 reel）： PCC - M0645M，M0754M，M0750M，M0854M，M0850M，

　　　　　　M1054M，M1050M，M1050ML，M1060ML● 2,000 pcs/box （2 reel）： PCC - M0530M，M0540M，M0630M

Explanation of Part Numbers

Temperature rating

Features

Code SizeP

4.7 μH□ 5 mm

4R7 →220 → 22 μH101 → 100 μH N □ 6 mm

M □ 7 mmK □ 8 mmC □ 10 mm

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 02　　Feb. 2020

Operating temperature range Tc : -40 ℃ to +150 ℃ (Including self-temperature rise)

Ta : -5 ℃ to +35 ℃ 85%RH max.Storage condition After PWB mountingBefore PWB mounting

1 2 3 4 5 6 7 8 9 10 11 12

E T Q P M Y

25 °C100 °C125 °C150 °C

0

10

20

30

40

50

60

0 1 320.5 1.5 2.5

DC Bias (A)

Indu

ctor

s (μ

H)

Product Code Height Winding Inductance Suffix SizeCoreClassification

1

Power Inductors

1. Series PCC-M0530M/PCC-M0540M (ETQP3M□□□YFP/ETQP4M□□□YFP)

ETQP3M2R2YFP 1ETQP3M3R3YFP 1ETQP4M4R7YFP 1ETQP4M220YFP 1*1: Measured at 100 kHz*2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also ✽5*3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 52 K/W measured on 5.5×5.0×3.0 mm case size and approx.

48 K/W measured on 5.5×5.0×4.0 mm case size. See also (✽5)*4: Saturation rated current : DC current which causes L(0) drop –30 %.*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used．*6: Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +155°C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.

Performance Characteristics (Reference 1)● Inductance vs DC Current

22 163.0 (179.0) 1.9 2.3 3.1

5.0 8.64.6 36.0 ( 39.6) 4.0 4.8 7.7

Should a safety concern arise regarding this product, please be sure to contact us immediately. 02　　Feb. 2020

SeriesInductance *1 DCR (at 20 ℃)

（ｍΩ）Rated Current (Typ. : A) MSL

Level△T=40K △L=–30%

L0(μH)

Tolerance

(%) Typ. (max.) Tolerance

(%) *2 *3 *4

Standard Parts

PCC-M0530M[5.5×5.0×3.0(mm)]

PCC-M0540M[5.5×5.0×4.0(mm)]

Part No.

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.

*5

2.2

±20

22.6 ( 24.8)

±10

4.8 5.8 10.93.3 31.3 ( 34.4) 4.1

［ ETQP3M2R2YFP ］［ ETQP3M3R3YFP ］

［ ETQP4M4R7YFP ］［ ETQP4M220YFP ］

0 12 0 12

1 3 40 5

0.0

1.0

2.5

1.5

0.5

2.0

0

43

5

1

2

0

10

20

30

0 12

0

43

5

1

2

15

5

25

10

10

1014

14

14862 4

862 4

862 4

2

Indu

ctor

s(μ

H)

Indu

ctor

s (μ

H)

Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)

DC Bias (A)

DC Bias (A)

DC Bias (A)

DC Bias (A)

2

Power Inductors

Performance Characteristics (Reference 2)● Case Temperature vs DC Current

PWB condition A : Four-layer PWB (1.6 mm FR4), See also ✽2PWB condition B : Multilayer PWB with high heat dissipation performance. See also ✽3


Tem

pera

ture

ris

e ΔT

(K)

DC Bias (A)

DC Bias (A)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

0

20

40

80

60

0

20

40

80

60

DC Bias (A)

DC Bias (A)

1.50.5 1.0 2.0 2.5 3.0 3.5

0

20

40

80

60

0

20

40

80

60

0

［ ETQP3M2R2YFP ］［ ETQP3M3R3YFP ］

［ ETQP4M4R7YFP ］［ ETQP4M220YFP ］

31 5 720 4 6 8

31 5 720 4 6

31 5 720 4 6

3

Power Inductors

2. Series PCC-M0630M/PCC-M0645M (ETQP3M□□□YFN/ETQP4M□□□YFN)

ETQP3MR68YFN 1ETQP3M1R0YFN 1ETQP4M2R2YFN 1ETQP4M3R3YFN 1ETQP4M6R8YFN 1ETQP4M100YFN 1ETQP4M220YFN 1ETQP4M330YFN 3ETQP4M470YFN 1*1: Measured at 100 kHz*2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also ✽5*3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 44 K/W measured on 6.5×6.0×3.0 mm case size and approx. 37 K/W measured on 6.5×6.0×4.5 mm case size. See also (✽5)*4: Saturation rated current : DC current which causes L(0) drop –30 %.*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used．*6: Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +155°C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.


172.00 (189.20) 2.0 2.5 4.147 210.00 (231.00) 1.8 2.2 3.8

54.20 (59.60) 3.5 4.5 8.322 126.00 (138.60) 2.3 2.9 6.0

16.10 (17.71) 6.4 8.2 13.36.8 39.30 (43.20) 4.1 5.2 10.0

*3 *4 *5

10.7 20.0

L0(μH)

Tolerance


(%) *2

Standard Parts

PCC-M0645M[6.5×6.0×4.5(mm)]

Series

PCC-M0630M[6.5×6.0×3.0(mm)]

±10

9.8 12.0 24.00.68

Part No.Inductance *1 DCR (at 20 ℃)


Level△T=40K △L=–30%


1.0

3.3

10

33

±20

6.30 (6.90)7.90 (8.70) 8.8

2.2 10.40 (11.44) 8.0 10.2 14.4

［ ETQP3MR68YFN ］［ ETQP3M1R0YFN ］

［ ETQP4M3R3YFN ］［ ETQP4M6R8YFN ］［ ETQP4M100YFN ］

［ ETQP4M220YFN ］［ ETQP4M330YFN ］［ ETQP4M470YFN ］

Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)

0.0

0.4

0.6

0.2

0.0

0.4

1.0

0.2

0

4

3

1

2

0

8

6

2

4

0

4

2

0

10

20

30

0

10

20

30

0

10

20

30

0.8

0.6

8

6

12

10

40

40

50

0 4 128 16 20 24 0 10 205 15

0 4 128 16 20 0 2 64 8 10 0 2 64 8

0 2 64 8 10 12 0 2 31 4 5 0 2 31 4 5

DC Bias (A) DC Bias (A)

DC Bias (A) DC Bias (A) DC Bias (A)


0.1

0.3

0.5

0.7

5

15

25

3

1

5

7

31 5 7 92 6 10 14 18 31 5 7 9

0.5 1.5 2.5 3.5 4.5 0.5 1.5 2.5 3.5 4.5

Indu

ctor

s(μ

H)

DC Bias (A)

0

3

1

2

0 10 205 15

［ ETQP4M2R2YFN ］

4

Power Inductors




［ ETQP3MR68YFN ］［ ETQP3M1R0YFN］

［ ETQP4M3R3YFN ］［ ETQP4M6R8YFN ］［ ETQP4M100YFN ］

［ ETQP4M220YFN ］［ ETQP4M330YFN ］［ ETQP4M470YFN ］

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

0

20

40

80

60

0

20

40

80

60

0

20

40

80

60

0

20

40

80

60

0

20

40

80

60

0

20

40

80

60

0

20

40

80

60

0 4 8 12 16 0 4 8 12 16

0 4 8 12 0 2 4 6 0 1 32 4 5 6

0 1 32 4 0 1 32 0 1 32




0

20

40

80

60

2 6 2 6

2 6

10 14 18 10 14 18

10 1 3 5 7

0.5 1.5 2.5 0.5 1.5 2.5

［ ETQP4M2R2YFN ］

Tem

pera

ture

ris

e ΔT

(K)

DC Bias (A)

0

20

40

80

60

0 4 8 12 162 6 10 14

5

Power Inductors

3. Series PCC-M0754M/PCC-M750M (ETQP5M□□□YFM/ETQP5M□□□YGM)

ETQP5M3R3YFM 1ETQP5M4R7YFM 1ETQP5M6R8YFM 1ETQP5M100YFM 1ETQP5M220YFM 1ETQP5M330YFM 1ETQP5M470YFM 1ETQP5M680YFM 1

ETQP5M101YGM 3

*1: Measured at 100 kHz*2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also ✽5*3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant is approx. 31 K/W measured on 7.5×7.0×5.4 mm　case size and approx.　 29 K/W measured on 7.5×7.0×5.0 mm case size. See also (✽5)*4: Saturation rated current : DC current which causes L(0) drop –30 %.*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used．*6: Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +155°C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.


95 348.00 (382.80) 1.4 1.9 3.1

2.9 4.166 251.00 (276.10) 1.8 2.3 3.9

22 92.00 (102.00) 3.0 3.7 5.810 37.60 (41.30) 4.7 5.7 10.6

±20

11.90 (13.09)

±10

8.34.7 20.40 (22.50) 6.36.8 26.70 (29.40) 5.5

33 120.00 (132.00) 2.648 156.00 (172.00) 2.3



Level△T=40K △L=–30%L0

(μH)Tolerance


(%) *2 *3 *4 *5

Standard Parts

Series


PCC-M0750M[7.5×7.0×5.0(mm)]

3.3 10.48.06.9

14.413.112.1

3.3 4.8

PCC-M0754M[7.5×7.0×5.4(mm)]

［ ETQP5M6R8YFM］

［ ETQP5M220YFM ］［ ETQP5M330YFM ］

［ ETQP5M470YFM ］［ ETQP5M101YGM ］

［ ETQP5M100YFM ］

Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)




Indu

ctor

s(μ

H)

DC Bias (A)

0

4

3

1

2

6

5

0 10 205 15

0

10

20

25

5

15

0 2 64 8 100

10

20

30

40

0 2 64 8

0

10

20

30

40

50

60

0 2 31 4 5 60

20

40

80

60

100

0 2 31 4 5

0

8

6

2

4

0 84 12 16

3

1

5

7

2 6 10 14

0

4

2

8

6

12

10

0 84 12 162 6 10 14

［ ETQP5M4R7YFM ］［ ETQP5M3R3YFM ］


Indu

ctor

s(μ

H)

DC Bias (A)

0

4

3

1

2

0 10 205 15

Indu

ctor

s(μ

H)

DC Bias (A)

0

20

40

80

60

0 2 64 831 5 7

6

Power Inductors




［ ETQP5M4R7YFM ］［ ETQP5M6R8YFM］

［ ETQP5M220YFM ］［ ETQP5M330YFM ］



Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)



DC Bias (A)

0

20

40

80

60

0 2 4 6 8 100

20

40

80

60

0 2 4 6 8 10

0

20

40

80

60

0 2 4 6 80

20

40

80

60

0 1 32 4 50

20

40

80

60

0 1 32 4 5

0

20

40

80

60

0 1 32 4

［ ETQP5M101YGM ］

Tem

pera

ture

ris

e ΔT

(K)

DC Bias (A)

0

20

40

80

60

0 1 320.5 1.5 2.5


Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)


［ ETQP5M3R3YFM ］

0

20

40

80

60

0

20

40

80

60

0 2 4 6 8 10 12 14

0 1 32 4

7

Power Inductors

4. Series PCC-M0854M/PCC-M0850M (ETQP5M□□□YFK/ETQP5M□□□YGK)

ETQP5M2R5YFK 1ETQP5M3R3YFK 1ETQP5M100YFK 1ETQP5M150YFK 1ETQP5M220YFK 1ETQP5M470YFK 1

ETQP5M101YGK 3

*1: Measured at 100 kHz*2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also ✽5*3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 27 K/W measured on 8.5×8.0×5.4 mm case size and approx.



48 125.00 (138.00) 2.9 3.4 5.4

48.20 (53.10) 4.7 5.5 7.26.9

*5

2.5

±20

7.60 (8.40)

±10

11.9 14.0 20.13.3 9.50 (10.45) 10.7 12.5 17.910 13.015

△L=–30%L0

(μH)Tolerance


(%) *2 *3 *4

Standard Parts

SeriesPart No.

PCC-M0854M[8.5×8.0×5.4(mm)]

33.40 (36.80) 5.7 6.7

22 63.00 (70.00) 4.1 4.8

Inductance *1 DCR (at 20 ℃)（ｍΩ）

Rated Current (Typ. : A) MSLLevel△T=40K


PCC-M0850M[8.5×8.0×5.0(mm)]


100 302.00 (333.00) 1.7 2.1 3.0

［ ETQP5M2R5YFK ］［ ETQP5M100YFK ］

［ ETQP5M150YFK ］［ ETQP5M220YFK ］［ ETQ5M470YFK ］

［ ETQP5M101YGK ］

［ ETQP5M3R3YFK ］

Indu

ctor

s (μ

H)

Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)


0

10

20

25

5

15

0 2 64 8 10010

203040

5060

0 2 64 8

40

020

80

60

100120

0 2 31 4 5

DC Bias (A)

0 10 20 300.0

1.0

2.5

1.5

0.5

2.0

3.0

5 15 25 0

4

2

8

6

1210

0 84 12 162 6 10 14

0 84 120

10

20

5

15

2 6 10


Indu

ctor

s(μ

H)

DC Bias (A)

Indu

ctor

s(μ

H)

0 10 20 305 15 250

4

3

1

2

8

Power Inductors




［ ETQP5M2R5YFK ］［ ETQP5M100YFK ］

［ ETQP5M150YFK ］［ ETQP5M220YFK ］［ ETQ5M470YFK ］

［ ETQP5M101YGK ］

DC Bias (A)


0

20

40

80

60

0 2 4 6 8 10

0

20

40

80

60

0 4 8 12 16 20

0

20

40

80

60

0 1 32 4 5 6 70

20

40

80

60

0 1 32 4 5

0

20

40

80

60

1.50.5 1.0 2.0 2.5 3.00

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

0

20

40

80

60

0 2 64 81 3 5 7DC Bias (A) DC Bias (A)

Tem

pera

ture

ris

e ΔT

(K)

DC Bias (A)

0

20

40

80

60

0 63 9 12 15 18

［ ETQP5M3R3YFK ］

9

Power Inductors

5. Series PCC-M1054M/PCC-M1050M (ETQP5M□□□YFC/ETQP5M□□□YGC)

ETQP5M1R5YFC 1ETQP5M2R5YFC 1ETQP5M3R3YFC 1ETQP5M4R7YFC 1ETQP5M100YFC 1ETQP5M150YFC 1ETQP5M220YFC 1ETQP5M330YFC 1ETQP5M470YFC 1ETQP5M680YFC 1ETQP5M3R3YGC 3

ETQP5M101YGC 3




208.00 (229.00) 2.2 2.7 3.0

4.93.3 7.10 (7.81) 11.8 14.7 23.4

4.2 6.832.5 68.50 ( 75.40) 4.2 5.0

6.2 8.815 35.60 (39.16)

7.6

1.45

±20

3.80 (4.20)

±10

17.9

3.3 7.10 (7.90) 13.14.7

22 45.00 (50.00) 5.2

47 99.00 (108.90) 3.5

97

2.5 5.30 (5.90) 15.1 18.1 27.2


PCC-M1050M[10.7×10.0×5.0(mm)]

66 136.00 (149.60) 3.0 3.6

PCC-M1054M[10.7×10.0×5.4(mm)]

10.20 (11.30) 10.910 23.80 (26.20) 7.1

21.4 35.1

8.5 10.75.8 7.0

15.7 22.713.1 20.0

12.0

Standard Parts



Level△T=40K Series△L=–30%L0

(μH)Tolerance


(%) *2 *3 *4 *5

［ ETQP5M4R7YFC ］

［ ETQP5M470YFC ］［ ETQP5M330YFC ］


［ ETQP5M220YFC ］

0 10 20 30 40 0 10 20 30 40 0 10 20 30

0 10 205 15 0 84 12 16 0 84 122 6 1410

0 842 6 10 0 842 6 10 0 842 6 10




0.4

1.2

0.8

1.6

1.0

2.5

1.5

0.5

2.0

3.0

0

4

3

1

2

0

43

12

6

5

0

4

2

86

1210

0

10

20

5

15

0

10

20

25

5

15

0102030

405060

0

10

20

30

40

Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)

0.0 0.0 5 15 25

2 6 10 14

［ ETQP5M1R5YFC ］［ ETQP5M2R5YFC ］［ ETQP5M3R3YFC ］

NEW

10

Power Inductors

Performance Characteristics (Reference 1)




［ ETQP5M1R5YFC ］［ ETQP5M2R5YFC］










DC Bias (A)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

0

20

40

80

60

0

20

40

80

60

0

20

40

80

60

0

20

40

80

60

0

20

40

80

60

0

20

40

80

60

0

20

40

80

60

0

20

40

80

60

0

20

40

80

60

0

20

40

80

60

0 4 8 12 16 20 0 2 4 6 8100 2 64 8

0 4 128 16 20 240 10 205 15 25 30 0 10 205 15 25

1012

100 2 64 8 0 1 32 4 5 6 7

0 1 32 4 5 6

［ ETQP5M101YGC ］

DC Bias (A)

0

20

40

80

60

0 1 32 4 5

0 2 31 4


0 2 4 61 3 5 8 9

DC Bias (A)

0

20

40

80

60

Indu

ctor

s(μ

H)

7

［ ETQP5M101YGC ］

DC Bias (A)

02040

80

60

100120

Indu

ctor

s(μ

H)

2 4 61 3 70 5DC Bias (A)

0

4

3

1

2

0 10 205 15 25 30 35

Indu

ctor

s(μ

H)

［ ETQP5M3R3YGC ］

0

20

40

80

60

0 10 205 15

Tem

pera

ture

ris

e ΔT

(K)

DC Bias (A)

Tem

pera

ture

ris

e ΔT

(K)［ ETQP5M3R3YGC ］

11

Power Inductors

6. Series PCC-M1050ML/PCC-M1060ML (ETQP5M□□□YLC/ETQP6M□□□YLC)

ETQP5MR33YLC 1ETQP5MR68YLC 1ETQP5M1R0YLC 1ETQP5M2R0YLC 1ETQP6M1R5YLC 1ETQP6M2R5YLC 1ETQP6M3R3YLC 1ETQP6M4R7YLC 1




17.0 26.34.7 8.70 (9.57) 11.8 14.1 22.53.3 6.00 (6.60) 14.2

23.3 32.02.5 4.55 (5.00) 16.3 19.6 25.8

±10

33.20.68 1.75 (1.93) 26.31.0 2.30 (2.53) 23.02.0 4.60 (5.06) 16.21.5 3.20 (3.52) 19.5

Standard Parts



Level△T=40K Series△L=–30%

L0(μH)

Tolerance


(%) *2 *3 *4 *5

19.4 31.3


PCC-M1060ML[10.9×10.0×6.0(mm)]

PCC-M1050ML[10.9×10.0×5.0(mm)]

39.7 56.731.5 40.027.5 37.8

0.33

±20

1.10 (1.21)

［ ETQP5MR33YLC ］［ ETQP5MR68YLC ］

［ ETQP5M1R0YLC ］




Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)

0 10 20 30 40 50 60 70 80 0 10 20 30 40 50 60

0 10 20 30 40 50 60

0 10 20 30 40

0 10 205 15 25 30 40 5035 45

0 10 205 15 25 30 40 5035 45

0.1

0.3

0.2

0.4

0.0

0.60.7

0.2

0.4

0.00.1

0.3

0.5

0.0

0.4

1.0

0.2

0.80.6

1.2

0.0

1.0

2.5

1.5

0.5

2.0

3.0

0.0

1.0

2.5

1.5

0.5

2.0

0.0

1.0

1.5

0.5

2.0

DC Bias (A)DC Bias (A)



12

Power Inductors

Performance Characteristics (Reference 1)




［ ETQP5MR33YLC ］［ ETQP5MR68YLC ］







Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)


0

20

40

80

60

0

20

40

80

60

0

20

40

80

60

0

20

40

80

60

0

20

40

80

60

0

20

40

80

60

0

20

40

80

60

0

20

40

80

60

0 10 20 30 40 50 60 0 10 205 15 25 30 4035 45

0 10 205 15 25 30 35 0 10 205 15 25 30

0 10 205 15 25 30 35

0 10 205 15 25 0 10 205 15




0 8 164 12 20 24 28


Indu

ctor

s(μ

H)

DC Bias (A)


Indu

ctor

s(μ

H)

DC Bias (A)0 10 205 15 25 30 4035 0 10 205 15 25 30 4035

0.0

1.0

2.5

1.5

0.5

2.0

3.03.5

0

4

3

1

2

5

13

Power Inductors

Dimensions in mm (not to scale) Dimensional tolerance unless noted : ±0.5

3.0 max.4.0 max.

M0850M 5.0 max.

(ETQP5M□□□YFC/YGC) (ETQP5M□□□YLC/ETQP6M□□□YLC)

Series PCC-M0754M Series PCC-M0854M

Series PCC-M1054M Series PCC-M1050MLSeries PCC-M1050M Series PCC-M1060ML

Series HM0754M 5.4 max.

Series HM0630M 3.0 max.M0645M 4.5 max.

SeriesM0530MM0540M


(ETQP5M□□□YFM/YGM)Series PCC-M0750M

(ETQP5M□□□YFK/YGK)Series PCC-M0850M

H


Series PCC-M0530M

(ETQP3M□□□YFP/ETQP4M□□□YFP)

Series PCC-M0630M

(ETQP3M□□□YFN/ETQP4M□□□YFN)Series PCC-M0540M Series PCC-M0645M

M0750M 5.0 max.


M1050M 5.0 max.

Series HM1050ML 5.0 max.M1060ML 6.0 max.


3.0±

0.3

1.2 1.2

H

SuffixInductance5.5±0.4

5.0±

0.4

PolarityDate Code

0.05

min

.

SuffixInductance

PolarityDate Code

3.0±

0.3

1.5 1.5

6.5±0.4

6.0±

0.4

H0.

05m

in.

SuffixInductance SuffixInductance

SuffixInductance SuffixInductance

PolarityDate CodePolarityDate Code

PolarityDate Code PolarityDate Code

3.0±

0.3

2.0 2.0

H

7.5±0.4

7.0±

0.4

0.1m

in.

3.0±

0.3

2.0

H8.5±0.4

8.0±

0.4

4.2±

0.3

10.7±0.5

10.0

±0.

4

7.3±

0.3

1.8 1.8

H

0.15

min

.

2.0

0.1m

in.

2.0 2.0

10.9±0.6

10.0

±0.

4

H0.

1min

.

14

Power Inductors

Recommended Land Pattern in mm (not to scale) Dimensional tolerance unless noted : ±0.5

※Don't wire on the pattern on shaded portion the PWB.


■ As for Soldering Conditions and Safety Precautions (Power Choke Coils (Automotive Grade)),Please see Data Files


Series PCC-M0854M Series PCC-M0850M

(ETQP5M□□□YFK/YGK)

Series PCC-M1050ML Series PCC-M1060ML

(ETQP5M□□□YLC/ETQP6M□□□YLC)

Series PCC-M1054MSeries PCC-M1050M

(ETQP5M□□□YFC/YGC)

Series PCC-M0540M Series PCC-M0750M Series PCC-M0530M Series PCC-M0630M

(ETQP3M□□□YFN/ETQP4M□□□YFN)Series PCC-M0645M

(ETQP3M□□□YFP/ETQP4M□□□YFP)

Series PCC-M0754M

(ETQP5M□□□YFM/YGM)

6.0

3.6

6.1

2.27.2

7.0

3.6

7.1

2.88.8

9.0

4.0

9.4

3.812.4

11.0

4.8

11.7

6.113.7

7.9

11.9

6.513.9

3.6

8.4

2.810.0

8.0

11.0

15

Power Inductors

Packaging Methods (Taping) ● Embossed Carrier Tape Dimensions in mm (not to scale)

PCC-M0530M PCC-M0540M PCC-M0630M PCC-M0645M PCC-M0754M/M0750M PCC-M0854M/M0850M PCC-M1054M/M1050M PCC-M1050ML/M1060ML

● Taping Reel Dimensions in mm (not to scale)

PCC-M0530M/M0540M PCC-M0630M/M0645M PCC-M0754M/M0750M PCC-M0854M/M0850M PCC-M1054M/M1050M PCC-M1050ML/M1060ML

Component Placement (Taping)

Standard Packing Quantity/Reel

1,000 pcs PCC-M0540M ETQP4M◻◻◻YFP PCC-M0630M ETQP3M◻◻◻YFN PCC-M0645M ETQP4M◻◻◻YFN

1,000 pcs / box（2 reel） 500 pcs

PCC-M0754M ETQP5M◻◻◻YFM PCC-M0750M ETQP5M◻◻◻YGM PCC-M0854M ETQP5M◻◻◻YFK PCC-M0850M ETQP5M◻◻◻YGK

SeriseM0630M/M0645MM0754M/M0750MM0854M/M0850M

SeriseM0530M/M0540MM1054M/M1050MM1050ML/M1060ML

PCC-M1050ML ETQP5M◻◻◻YLC PCC-M1060ML ETQP6M◻◻◻YLC

PCC-M0530M ETQP3M◻◻◻YFP2,000 pcs / box（2 reel）

Series

A

A

5.6

16.01.75

7.52.0

0.4

3.34.3

7.1 3.35.0

8.1 6.09.1

10.65 11.5 0.5

B

8.67.6

W E F P1 P２

11.75

6.6

6.1

Should a safety concern arise regarding this product, please be sure to contact us immediately. 02　　Feb. 2020Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.

C D E WB

100 13 221

PCC-M1054M ETQP5M◻◻◻YFC PCC-M1050M ETQP5M◻◻◻YGC

33017.5

25.5

Serise

Serise Part No. Minimum Quantity/ Packing Unit Quantity per reel

P０ φD0 t1 t2

24.0

12.0

6.35

1.54.0

16.0

E

W

t1

t2P2 P0

P1

A

Tape running direction

F

A

E

DW

B

C

Terminal

B

Term

inal

16

Power Inductors

Power Choke Coil (Automotive Grade)Series : PCC-M0854MS

PCC-M1050MS



●The vibration-resistant structure achieves a vibration acceleration-resistance of 50 G or higher in 150 ºC environments●Reduce core loss in high frequency band (More than 2 MHz)●High heat resistance : Operation up to 150 °C including self-heating●SMD type●High-reliability : High vibration resistance as result of newly developed integral construction;

under severe reliability conditions of automotive and other strenuousapplications

●High bias current : Excellent inductance stability using ferrous alloy magnetic material●Temp. stability : Excellent inductance stability over broad temp. range●Low audible (buzz) noise : New metal composite core technology●High efficiency : Low DC resistance of winding and low eddy-current loss of the core●Shielded construction●AEC-Q200 compliant●RoHS compliant

Recommended Applications ●ECU placed in the engine itself, mechanical-electrical-integrated ECU●Noise filter for various drive circuitry requiring high temp. operation and peak current handling capability●Boost-Converter, Buck-Converter DC/DC

Standard Packing Quantity (Minimum Quantity/Packing Unit) ● 1,000 pcs/box （2 reel）


Temperature rating

Features

R68 → Code SizeK

0.68 μH□ 8 mm

C □ 10 mm




1 2 3 4 5 6 7 8 9 10 11 12

E T Q P M Y SProduct Code Height Winding Inductance Suffix SizeCoreClassification

17

Power Inductors

ETQP5M2R5YSK 1

ETQP5MR68YSC 1



Performance Characteristics (Reference)● Inductance vs DC Current

● Case Temperature vs DC Current PWB condition A : Four-layer PWB (1.6 mm FR4), See also ✽2PWB condition B : Multilayer PWB with high heat dissipation performance. See also ✽3


Standard Parts



Level△T=40K △L=–30%L0

(μH)Tolerance


(%) *2 *3 *4 *5

21.7

0.68 1.66 (1.83) 27.0 32.3 40.0


Series

PCC-M0854MS[8.5×8.0×5.4(mm)]

PCC-M1050MS[10.9×10.0×5.0(mm)]

Series PCC-M0854MS(ETQP5M□□□YSK)

Series PCC-M1050MS(ETQP5M□□□YSC)

2.45±20

7.40 (8.14)±10

12.0 14.1

［ ETQP5M2R5YSK ］［ ETQP5MR68YSC ］

［ ETQP5M2R5YSK ］［ ETQP5MR68YSC ］


Tem

pera

ture

ris

eΔT

(K)

DC Bias (A)

Tem

pera

ture

ris

eΔT

(K)

DC Bias (A)

Indu

ctor

s(μ

H)

Indu

ctor

s (μ

H)

0 10 205 15 30250.0

1.0

2.5

1.5

0.5

2.0

3.00.60.7

0.2

0.4

0.00.1

0.3

0.5

0 10 20 30 40 50

0

20

40

80

60

0

20

40

80

60

0 10 205 15 25 30 35 40 45100 2 64 8 12 14 16 18 20

5.08

±0.

3

1.3 1.3

8.5±0.4

8.0±

0.4

0.1

min

.

5.4

max

.

10.9±0.6

7.3±

0.3

1.8 1.8

10.0

±0.

40.

15 m

in.

5.0

max

.

SuffixInductance

PolarityDate Code

SuffixInductance

PolarityDate Code

18

Power Inductors





　　　PCC-M0854MS　　　PCC-M1050MS


Standard Reel Dimensions





6.00.4

330

ETQP5M◻◻◻YSKETQP5M◻◻◻YSC

A

7.5 12.09.1 8.6

Series

16.016.0

2.0 4.0 1.510.65 11.75 24.0

1.7511.5 0.5

E W17.52 25.5

6.35

B C φD

100 13 21


500 pcs1,000 pcs / box（2 reel）Serise Part No. Minimum Quantity/ Packing Unit Quantity per reel

Series PCC-M0854MS Series PCC-M1050MS(ETQP5M□□□YSK)

W E F P1 t1 t2

(ETQP5M□□□YSC)

Series BA P２ P０ φD0

A

E

DW

B

C

E

W

t1t2P2 P0

P1

A


F

B

7.9

11.9

6.513.9

116

9.5

10.5

9

4.826

Serise PCC-M0854MS Serise PCC-M1050MS

Terminal

Term

inal

19

Power Inductors

Power Choke Coil (Automotive Grade)Series : PCC-M1280MF



●High heat resistance : Operation up to 160 °C including self-heating●Large current Power ：53 A (R33 type)●High vibration resistance ：30 G●SMD type●High-reliability : High vibration resistance as result of newly developed integral construction;

under severe reliability conditions of automotive and other strenuous applications

●High bias current : Excellent inductance stability using ferrous alloy magnetic material●Temp. stability : Excellent inductance stability over broad temp. range●Low audible (buzz) noise : A gapless structure achieved with metal composite core●High efficiency : Low DC resistance of winding and low eddy-current loss of the core●Shielded construction●AEC-Q200 compliant●RoHS compliant


Recommended Applications ● 500 pcs/box （2 reel）


Temperature rating




Code Size4R7 → 4.7 μH A

0.68 μH□ 12 mm

Features

R68 →

1 2 3 4 5 6 7 8 9 10 11 12

E T Q P 8 M JProduct Code Height Winding Inductance Suffix SizeCoreClassification

20

Power Inductors

ETQP8MR33JFA 1ETQP8MR68JFA 1ETQP8M1R0JFA 1ETQP8M1R5JFA 1ETQP8M2R5JFA 1ETQP8M3R3JFA 1ETQP8M4R7JFA 1*1: Measured at 100 kHz ▲ETQP8MR33JFA : Under development*2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also ✽5*3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 20 K/W measured. See also (✽5)*4: Saturation rated current : DC current which causes L(0) drop –30 %.*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used．*6: Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +160°C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.


▲ Under development

4.7 4.90 (5.39) 16.8 20.2 24.7

23.0 27.7 32.13.3 3.60 (3.96) 19.6 23.6 27.6

Standard Parts


（ｍΩ）Rated Current (Typ. : A)

△T=40K △L=–30%L0

(μH)Tolerance


(%) *2 *3 *4

PCC-M1280MF[12.6×13.2×8.0(mm)]

Series


1.36 (1.50) 31.8

MSLLevel

*5

38.3 44.41.5 1.80 (1.98) 27.7 33.3 29.92.5 2.60 (2.86)


±20

0.70 (0.77)

±10

44.4 53.5 84.50.68 1.10 (1.21) 35.4 42.6 56.90.33

1.0

PCC-M1280MF[12.6×13.1×8.0(mm)]

0.1

［ ETQP8MR33JFA ］［ ETQP8MR68JFA ］

［ ETQP8M1R5JFA ］［ ETQP8M2R5JFA ］［ ETQP8M3R3JFA ］

［ ETQP8M4R7JFA ］

Indu

ctor

s (μ

H)

Indu

ctor

s (μ

H)

Indu

ctor

s (μ

H)

Indu

ctor

s(μ

H)

Indu

ctor

s (μ

H)

Indu

ctor

s (μ

H)

0.4

0.2

0.0 0.0 0.0

0

0.70.6

0 40 120806020 1400.0

70100 80

0 20

0



DC Bias (A)

5

30

Indu

ctor

s (μ

H)

DC Bias (A)

0

3

2

0

10 20


0.05

4

1.0

1

0.8

1.2

0.00

0.100.150.200.25

0.350.30

0.40

100 160

0.3

0.5

0 20 40 60 80

0.40.2

0.6

0.0

0

50 6030 40

1.0

1.5

0.5

2.0

50 604010

1.0

2.5

1.5

0.5

2.0

3.0

1.0

2.5

1.5

0.5

2.0

3.0

20 30 50 604010

3.5

20 30 504010

20 30 504010

▲

21

Power Inductors





［ ETQP8MR33JFA ］［ ETQP8MR68JFA］

［ ETQP8M1R5JFA ］［ ETQP8M2R5JFA ］［ ETQP8M3R3JFA ］


Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

0

20

40

80

60



DC Bias (A)


Tem

pera

ture

ris

e ΔT

(K)

DC Bias (A)

0

20

40

80

60

0

20

40

80

60

0

20

40

80

60

0

20

40

80

60

0

20

40

80

60

0

20

40

80

60

0 10 20 30 40 50 60 70 80 0 10 20 30 40 50 60 0 10 20 30 40 50 60

0 10 20 30 40 50 0 10 205 15 25 30 4035 0 10 205 15 25 30 35

0 10 205 15 25 30

▲

22

Power Inductors


●ETQP8MR33JFA ●ETQP8M1R5JFA ●ETQP8M3R3JFA●ETQP8MR68JFA ●ETQP8M2R5JFA ●ETQP8M4R7JFA●ETQP8M1R0JFA


●ETQP8MR33JFA ●ETQP8M4R7JFA ●ETQP8M3R3JFA

●ETQP8M2R5JFA ●ETQP8MR68JFA●ETQP8M1R0JFA●ETQP8M1R5JFA


ETQP8MR68JFAETQP8M1R0JFA

Part No.

ETQP8M1R5JFAETQP8M2R5JFA

ETQP8MR33JFA

Should a safety concern arise regarding this product, please be sure to contact us immediately.Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.

02　　Feb. 2020

8.6±0.85

9.0±1.258.8±1.05

ETQP8M4R7JFA2.1±0.4 8.0±1.0 1.25±0.42.1±0.4 8.0±1.02.1±0.4 8.0±1.01.8±0.4

BA B2.25±0.2

APart No.ETQP8M3R3JFA7.3±1.0 1.5±0.4

A

B

20

Inductance12.6±0.5

13.2

±0.

5

0.05

min

.

Inductance

0.05

min

.

12.6±0.5

13.1

±0.

5R68 3R3

Data code Data code

A A

B

A

8.0m

ax.

8.0m

ax.

10 10 10 10 10 10

10 10 10 10

Recommendcopper pad area

14.22.0

5.7

4.35

14.8

5.4

4.0

5.4

20 14.8 20 14.8

20 14.8

20 14.8

5.4

4.0

5.4

5.4

4.0

5.4

5.4

4.0

5.4

5.4

4.0

5.4

13.62.0

7.2

13.82.0

7.0

14.22.0

6.2

14.12.0

6.7

3.2 3.4

3.7 4.0



Recommendresist opening area

Recommendresist opening area Recommend

resist opening areaDon't wire this portion with PWB. Don't wire this portion with PWB.Don't wire this portion with PWB.



Don't wire this portion with PWB.



Don't wire this portion with PWB.

23

Power Inductors


● Component Placement (Taping)


Standard Reel Dimensions


PCC-M1280MFW

330 (100) 13 21 2 33.5A B C φD ESerise

4±0.22±0.2

A-A’

Sec

tion

1.75

±0.

128

.4±

0.1

３2±

0.3

13.3

5±0.

5

1.7+

0.15

A'

9.6±0.50.5A20.0±0.2

1.5+0.1

B

D

12.9±0.5

0

D B-B’ Section

0.05

A

E

φDW

B

C


Terminal Terminal

24

Power Inductors

Power Choke Coil (Automotive Grade)SeriesPCC-M0530M-LP PCC-M0630M-LPPCC-M0840M-LP PCC-M1040M-LP



Features●High heat resistance : Operation up to 155 °C including self-heating●Low profile : ３ｍｍ max. height（PCC-M0530M-LP, PCC-M0630M-LP）

４ｍｍ max. height（PCC-M0840M-LP, PCC-M1040M-LP）●SMD type ●High-reliability : High vibration resistance as result of newly developed integral construction ;


●High bias current : Excellent inductance stability using ferrous alloy magnetic material ●Temp. stability : Excellent inductance stability over broad temp. range●Low audible (buzz) noise : A gapless structure achieved with metal composite core●High efficiency : Low DC resistance of winding and low eddy-current loss of the core●Shielded construction●AEC-Q200 compliant●RoHS compliant

●Noise filter for various drive circuitry requiring high temp. operation and peak current handling capability●Boost-Converter, Buck-Converter DC/DC

Standard Packing Quantity (Minimum Quantity/Packing Unit) ●4,000 pcs/box （2 reel）： PCC-M0530M-LP，M0630M-LP●1,000 pcs/box （2 reel）： PCC-M0840M-LP，M1040M-LP


Temperature rating

0.68 μH

□ 10 mm

Recommended Applications

After PWB mounting

4.7 μH22 μH

Storage condition

Operating temperature range

Before PWB mounting

→→

4R7220

→R68

Ta : -5 ℃ to +35 ℃ 85%RH max.

Tc : -55 ℃ to +155 ℃ (Including self-temperature rise)

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.01　　Feb. 2020Should a safety concern arise regarding this product, please be sure to contact us immediately.

K

Size□ 5 mm□ 6 mm□ 8 mm

CodePN

C

1 2 3 4 5 6 7 8 9 10 11 12

E T Q P M K VProduct Code Height Winding Inductance Suffix SizeCoreClassification

25

Power Inductors

1. Series PCC-M0530M-LP (ETQP3M□□□KVP)

ETQP3M100KVP 1ETQP3M6R8KVP 1ETQP3M4R7KVP 1ETQP3M3R3KVP 1ETQP3M2R2KVP 1ETQP3M1R5KVP 1ETQP3M1R0KVP 1ETQP3MR68KVP 1ETQP3MR33KVP 1

*1: Measured at 100 kHz*2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also ✽5*3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 51 K/W measured on 5.5×5.0×3.0 mm case size. See also ✽5*4: Saturation rated current : DC current which causes L(0) drop –30 %.*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used．*6: Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +155°C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.

Performance Characteristics (Reference 1) ● Inductance vs DC Current

15.90.33 4.85 (5.34) 10.6 12.7 21.8

7.5 9.0 14.11.50 12.00 (13.20)

65.70 (72.27) 2.9 3.5 6.110.00

±20

96.00 (105.60)

±10

2.4

4.70 45.60 (50.16) 3.43.30

12.01.00 9.60 (10.56)


0.68 7.60 (8.36) 8.4 10.2

PCC-M0530M-LP[5.5×5.0×3.0(mm)]

27.30 (30.03) 4.42.20 20.00 (22.00) 5.2

2.9 4.26.80

6.3 10.16.7 8.1

4.1 6.75.4 8.0

Standard Parts




(μH)Tolerance


(%) *2 *3 *4 *5

Indu

ctor

s(μ

H)

［ ETQP3M100KVP ］

DC Bias (A)0 2 64 8

0

4

8

12

［ ETQP3M3R3KVP ］


Indu

ctor

s (μ

H)

DC Bias (A)

Indu

ctor

s (μ

H)

DC Bias (A)

0

1.0

3.0

0 4 128 16

0 10 200

0.4

0.8

1.2

2.0

Indu

ctor

s(μ

H)


DC Bias (A)


［ ETQP3MR68KVP ］

Indu

ctor

s (μ

H)

DC Bias (A)

Indu

ctor

s (μ

H)

DC Bias (A)

Indu

ctor

s (μ

H)


DC Bias (A)



Indu

ctor

s (μ

H)

DC Bias (A)

Indu

ctor

s (μ

H)

DC Bias (A)

0 2 64 80

4

8

2

0 2 64 120

4

3

5

6

10

1

2

8 10

0

1.0

2.5

0 4 128 16

2.0

0

1.0

1.5

0 4 128 16

2.0

1.5

0.5 0.5

20

0 10 200

0.4

0.8

0.6

0

0.2

0.3

0.4

0 4 128 16 20

0.2

30

0.1

26

Power Inductors

Performance Characteristics (Reference 2) ● Case Temperature vs DC Current



Tem

pera

ture

ris

e ΔT

(K)

［ ETQP3M100KVP ］

0 1 32 40

20

40

80



0 2 64 8

0 124 8

5

60

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

0

20

40

80

60

0

20

40

80

60

Tem

pera

ture

ris

e ΔT

(K)

0

20

40

80

60

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

0

20

40

80

60

0

20

40

80

60

Tem

pera

ture

ris

e ΔT

(K)

0

20

40

80

60

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

0

20

40

80

60

0

20

40

80

60

0 1 32 4 5 0 1 32 4 5 6

0 2 64 8 0 2 64 8 10 12

0 124 8 16 0 124 8 16










27

Power Inductors

2. Series PCC-M0630M-LP (ETQP3M□□□KVN)

ETQP3M330KVN 1ETQP3M220KVN 1ETQP3M150KVN 1ETQP3M100KVN 1ETQP3M6R8KVN 1ETQP3M4R7KVN 1ETQP3M3R3KVN 1ETQP3M2R2KVN 1ETQP3M1R5KVN 1ETQP3M1R0KVN 1ETQP3MR68KVN 1*1: Measured at 100 kHz*2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also ✽5*3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 44 K/W measured on 6.4×6.0×3.0 mm case size. See also ✽5*4: Saturation rated current : DC current which causes L(0) drop –30 %.*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used．*6: Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +155°C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.


9.9 12.1 16.00.68 5.20 (5.72) 10.8 13.2 20.2

6.5 7.9 12.81.50 11.00 (12.10) 7.4 9.1 14.2

4.6 5.6 9.83.30 24.10 (26.51) 5.0 6.1 11.5

5.86.80 45.60 (50.16) 3.6 4.5 8.1

33.00

±20

206.00(226.60)22.00 128.00(140.80)15.00 99.20 (109.12)10.00 71.00 (78.10)

4.70 29.00 (31.90)

2.20 14.50 (15.95)

1.00 6.20 (6.82)

PCC-M0630M-LP[6.4×6.0×3.0(mm)]


±10

1.7 2.1 3.02.22.5 3.0 5.12.9 3.6

2.7 4.3

Standard Parts




(μH)Tolerance


(%) *2 *3 *4 *5

Indu

ctor

s(μ

H)

［ ETQP3M330KVN ］

DC Bias (A)0 2 543

0

10

20

30

［ ETQP3M6R8KVN ］


0

2

6

0 4 128 16

0 124 80

0.5

1.0

1.5

4

1

8

16 20 24

2.0

Indu

ctor

s (μ

H)


DC Bias (A)0 2 64

0

5

15

20

8

Indu

ctor

s(μ

H)


DC Bias (A)0 642

0

10

15

20In

duct

ors

(μH

)


DC Bias (A)0 6 12108

0

4

8

12

4

25

10

5

8 2


0

2

4

0 4 128 16

3

5［ ETQP3M3R3KVN ］

0

2.0

0 4 128 20

1.0

3.0


0

1.0

2.0

0 4 128 16

1.5

2.5

20

1 0.5

16 20 24


0 10 200

0.4

0.8

30

1.2

［ ETQP3MR68KVN ］

0 100

0.2

0.4

0.6

20 30 40

0.8

Indu

ctor

s(μ

H)

Indu

ctor

s (μ

H)

Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)

Indu

ctor

s(μ

H)

Indu

ctor

s (μ

H)

Indu

ctor

s(μ

H)

DC Bias (A) DC Bias (A) DC Bias (A) DC Bias (A)


28

Power Inductors




Tem

pera

ture

ris

e ΔT

(K)


DC Bias (A)0 1 32

0

20

40

80



0 2 64

0 124 8

60

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

0

20

40

80

60

0

20

40

80

60

Tem

pera

ture

ris

e ΔT

(K)


DC Bias (A)0 1 32

0

20

40

80



0 2 64

0 2010 15

60Te

mpe

ratu

re r

ise

ΔT(K

)Te

mpe

ratu

re r

ise

ΔT(K

)

0

20

40

80

60

0

20

40

80

60

Tem

pera

ture

ris

e ΔT

(K)


DC Bias (A)0 1 52

0

20

40

80


［ ETQP3MR68KVN ］

0 2 64

60

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

0

20

40

80

60

0

20

40

80

60

Tem

pera

ture

ris

e ΔT

(K)


DC Bias (A)0 2 64

0

20

40

80


0 4 128

60

Tem

pera

ture

ris

e ΔT

(K)

0

20

40

80

60

4 3 4

8 8

5 0 2010 155

DC Bias (A) DC Bias (A) DC Bias (A) DC Bias (A)


29

Power Inductors

3. Series PCC-M0840M-LP (ETQP4M□□□KVK)

ETQP4M330KVK 1ETQP4M220KVK 1ETQP4M150KVK 1ETQP4M100KVK 1ETQP4M6R8KVK 1ETQP4M4R7KVK 1ETQP4M3R3KVK 1ETQP4M2R2KVK 1ETQP4M1R5KVK 1ETQP4M1R0KVK 1ETQP4MR68KVK 1*1: Measured at 100 kHz*2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also ✽5*3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 36 K/W measured on 8.5×8.0×4.0 mm case size. See also ✽5*4: Saturation rated current : DC current which causes L(0) drop –30 %.*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used．*6: Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +155°C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.


0.68 2.92 (3.21) 16.6 19.5 29.01.00 3.70 (4.07) 14.8 17.3 24.4

20.41.50 4.90 (5.39) 12.8 15.1 22.5

15.13.30 14.10 (15.51) 7.6 8.9 17.4

6.80 23.50 (25.85)16.10 (17.71) 7.1 8.3

3.215.00 55.00 (60.50) 3.810.00 41.60 (45.76) 4.4

PCC-M0840M-LP[8.5×8.0×4.0(mm)]


2.20 8.50 (9.35) 9.8 11.4

5.9 6.9 11.04.70

4.5 7.65.2 9.1

3.1 4.73.8 6.0

Standard Parts



33.00

±20

118.00 (129.80)

±10

2.622.00 78.40 (86.24)

MSLLevel△T=40K Series△L=–30%

L0(μH)

Tolerance


(%) *2 *3 *4 *5

Indu

ctor

s(μ

H)

［ ETQP4M330KVK ］

DC Bias (A)0 4 62

0

10

20

30

［ ETQP4M6R8KV ］

［ ETQP4M1R5KVK ］

Indu

ctor

s(μ

H)

DC Bias (A)

Indu

ctor

s (μ

H)

DC Bias (A)

0

2

6

0 5 1510 20

0 3010 200

0.5

1.0

1.5

4

8

40

2.0

Indu

ctor

s (μ

H)


DC Bias (A)0 8 1240

10

20

25



Indu

ctor

s (μ

H)

DC Bias (A)

Indu

ctor

s(μ

H)

DC Bias (A)

0

2

4

0 2010 30

0 3010 200

0.4

0.8

1.2

3

5

40

Indu

ctor

s(μ

H)


DC Bias (A)0 8 124

0

10

15

20


［ ETQP4MR68KVK ］

Indu

ctor

s (μ

H)

DC Bias (A)

Indu

ctor

s (μ

H)

DC Bias (A)

0

1.0

3.0

0 2010 30

0 3010 200

0.2

0.4

0.6

2.0

40

0.8

Indu

ctor

s (μ

H)


DC Bias (A)0 8 124

0

4

8

12


Indu

ctor

s(μ

H)

DC Bias (A)

0

0.5

1.5

0 10 3020 40

1.0

2.0

8

15

55

16

1

2.5

50

30

Power Inductors




Tem

pera

ture

ris

e ΔT

(K)


DC Bias (A)0 1 32

0

20

40

80



DC Bias (A)

DC Bias (A)

0 2 64

60

Tem

pera

ture

ris

e Δ

T(K)

Tem

pera

ture

ris

e ΔT

(K)

0

20

40

80

60

0

20

40

80

60

4 5

8 10






［ ETQP4MR68KVK ］



Tem

pera

ture

ris

e ΔT

(K)

0 1 320

20

40

80

0 84

0 5 15

60Te

mpe

ratu

re r

ise

ΔT(K

)Te

mpe

ratu

re r

ise

ΔT(K

)

0

20

40

80

60

0

20

40

80

60

4 5

12

Tem

pera

ture

ris

e ΔT

(K)

0 20

20

40

80

0 4

0 10 20

60

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

0

20

40

80

60

0

20

40

80

60

4 6

8 12

Tem

pera

ture

ris

e (Δ

TK)

0 420

20

40

80

0 84

60

Tem

pera

ture

ris

e ΔT

(K)

0

20

40

80

60

6 8

12 16

6

302520100 5 15 252010




31

Power Inductors

4. Series PCC-M1040M-LP (ETQP4M□□□KVC)

ETQP4M470KVC 1ETQP4M330KVC 1ETQP4M220KVC 1ETQP4M150KVC 1ETQP4M100KVC 1ETQP4M6R8KVC 1ETQP4M4R7KVC 1ETQP4M3R3KVC 1ETQP4M2R2KVC 1ETQP4M1R5KVC 1ETQP4M1R0KVC 1*1: Measured at 100 kHz*2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also ✽5*3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 27 K/W measured on 10.7×10.0×4.0 mm case size. See also ✽5*4: Saturation rated current : DC current which causes L(0) drop –30 %.*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used．*6: Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +155°C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.▲ ETQP4M4R7KVC Under development (Start of mass production: the 2nd half of 2019) Please contact us for customized part no.



17.4 25.01.00 2.60 (2.86) 19.6 23.9 34.6

11.2 13.93.30 9.40 (10.34) 10.3 12.6 17.1

7.6 10.86.80 18.50 (20.35) 7.4 8.9 12.1

4.1 5.0 7.415.00 37.00 (40.70) 5.2 6.3 9.2

3.4 4.2 5.647.00

±20

132.00 (145.20)

±10

2.8

22.00 60.00 (66.00)

1.50 4.90 (5.39) 14.3

4.70 11.80 (12.98) 9.2

PCC-M1040M-LP[10.7×10.0×4.0(mm)]


2.20 6.80 (7.48) 12.1 14.8 21.0

10.00 25.40 (27.94) 6.3

3.4 4.733.00 84.60 (93.06)

Standard Parts




(μH)Tolerance


(%) *2 *3 *4 *5

Indu

ctor

s(μ

H)

［ ETQP4M470KVC ］

DC Bias (A)0 4 620

10

20

30


［ ETQP4M2R2KVC ］

Indu

ctor

s(μ

H)

DC Bias (A)

Indu

ctor

s(μ

H)

DC Bias (A)

0

12

0 4 128 20

0 3010 200

0.5

1.0

1.5

4

8

40

2.5

50

40

16

2.0

Indu

ctor

s(μ

H)


DC Bias (A)0 6 1020

10

20

30



Indu

ctor

s(μ

H)

DC Bias (A)

Indu

ctor

s(μ

H)

DC Bias (A)

0

8

0 5 1510 25

0 3010 200

0.5

1.0

1.5

4

6

40

20

2.0

Indu

ctor

s(μ

H)


DC Bias (A)0 8 1240

5

10

15

［ ▲ETQP4M4R7KVC ］


Indu

ctor

s(μ

H)

DC Bias (A)

Indu

ctor

s(μ

H)

DC Bias (A)

0

5

0 10 30

0 3010 200

0.4

0.8

1.2

2

3

40

25

20

20

Indu

ctor

s(μH

)［ ETQP4M150KVC ］

DC Bias (A)0 12 1680

5

10


Indu

ctor

s(μ

H)

DC Bias (A)

0

3.0

0 10 30

2.0

1.0

20

15

20

8 4 8 4

2

4

1

50 50 60

32

Power Inductors




Should a safety concern arise regarding this product, please be sure to contact us immediately.Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before

01　　Feb. 2020

Tem

pera

ture

ris

e ΔT

(K)


DC Bias (A)0 1 32

0

20

40

80



DC Bias (A)

DC Bias (A)

0 2 64

0 10 20

60

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

0

20

40

80

60

0

20

40

80

60

4 5

8 10 12





［ ▲ETQP4M4R7KVC ］




Tem

pera

ture

ris

e ΔT

(K)

DC Bias (A)0 1 32

0

20

40

80

DC Bias (A)

DC Bias (A)

0 4

0 10 20

60Te

mpe

ratu

re r

ise

ΔT(K

)Te

mpe

ratu

re r

ise

ΔT(K

)

0

20

40

80

60

0

20

40

80

60

4 5

8 12

Tem

pera

ture

ris

e ΔT

(K)

DC Bias (A)0 42

0

20

40

80

DC Bias (A)

DC Bias (A)

0 4

0 10 20

60

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

0

20

40

80

60

0

20

40

80

60

6 8

8 12 16

Tem

pera

ture

ris

e ΔT

(K)

DC Bias (A)0 420

20

40

80

DC Bias (A)0 4

60

Tem

pera

ture

ris

e ΔT

(K)

0

20

40

80

60

6 8

8 12 16

6

30

33

Power Inductors


Should a safety concern arise regarding this product, please be sure to contact us immediately. 01　　Feb. 2020Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before

Series PCC-M0530M-LP Series PCC-M0630M-LP(ETQP3M□□□KVP) (ETQP3M□□□KVN)

(ETQP4M1R0KVC)

Series PCC-M0840M-LP Series PCC-M1040M-LP(ETQP4M□□□KVK) (ETQP4M□□□✽KVC) ✽Exemption 1R0

Series PCC-M1040M-LP

SuffixInductance

PolarityDate Code

5.5±0.4

1.0±0.4 1.0±0.4

2.54

±0.

3

5.0±

0.4

3.0

max

.

0.05 min.

SuffixInductance

PolarityDate Code

6.4±0.4

1.04±0.4 1.04±0.4

3.18

±0.

3

6.0±

0.4

3.0

max

.

0.05 min.

SuffixInductance

PolarityDate Code

8.5±0.4

1.3±0.4 1.3±0.4

5.08

±0.

3

8.0±

0.4

4.0

max

.

0.05 min.

SuffixInductance

PolarityDate Code

10.7±0.4

2.08±0.4 2.08±0.4

3.0±

0.3

10.0

±0.

4

4.0

max

.

0.05 min.

SuffixInductance

PolarityDate Code

10.7±0.4

2.15±0.5 2.15±0.5

4.7±

0.3

10.0

±0.

4

4.0

max

.

0.05 min.

34

Power Inductors





Series PCC-M0530M-LP Series PCC-M0630M-LP Series PCC-M0840M-LP (ETQP3M□□□KVP) (ETQP3M□□□KVN) (ETQP4M□□□KVK)

Series PCC-M1040M-LP Series PCC-M1040M-LP (ETQP4M□□□✽KVC)✽Exemption 1R0 (ETQP4M1R0KVC)


7.06.0

9.0

11.0

5.33

4

3.25

4

4.95

3

11.0

2.79

6.5

2.946

6.756

7.4

3.429

8.255

9.5

4.826

9.652

11.711.7

5.842

12.192

5.187

12.065

3.42

9

35

Power Inductors





Series A B W E t2

PCC-M0530M-LP 5.6 6.1 16 1.75 7.5 8 2 4F P1 P２ P０ φD0 t1

1.5 0.3

0.41.5 0.51.5

6.35

3.3PCC-M0630M-LP 6.5 7.1 16 1.75 7.5 8 2 4 1.5 0.3 3.3

16 2

W

17.5PCC-M0630M-LPPCC-M0840M-LP

PCC-M0840M-LP 8.63 9.1 16 1.75 6.0PCC-M1040M-LP 10.65 11.75 24 1.75 11.5 4

7.5 12 2 4

2

Series A B C D EPCC-M0530M-LP

330 (100) 13 21

4,000 pcs / box（2 reel）


2,000 pcs

500 pcs


PCC-M1040M-LP 25.5

Part No. Quantity per reelMinimum Quantity / Packing UnitSeriesPCC-M0530M-LPPCC-M0630M-LPPCC-M0840M-LPPCC-M1040M-LP

ETQP3M□□□KVPETQP3M□□□KVNETQP4M□□□KVKETQP4M□□□KVC

F

φD0 E

W

t1t2P2 P0

P1

A

B

A

E

D

W

B

C

Term

inal


36

Power Inductors

Power Choke Coil (Automotive Grade)Series : PCC-M0648M-LE

PCC-M0748M-LE



●Low loss (Low DC resistance)●High heat resistance : Operation up to 150 °C including self-heating●SMD type●High-reliability : High vibration resistance as result of newly developed integral construction ;






Temperature rating Operating temperature range



4R7220

4.7 μH22 μH

Features


Size□ 6 mm□ 7 mm

CodeNM

→→

1 2 3 4 5 6 7 8 9 10 11 12

E T Q P M K FProduct Code Height Winding Inductance Suffix SizeCoreClassification

37

Power Inductors

1. Series PCC-M0648M-LE (ETQP4M□□□KFN)

ETQP4M3R3KFN 1ETQP4M4R7KFN 1ETQP4M100KFN 1ETQP4M150KFN 1

*1: Measured at 100 kHz*2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also ✽5

*3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 30 K/W measured on 6.4×6.0×4.8 mm case size. See also (✽5)*4: Saturation rated current : DC current which causes L(0) drop –30 %.*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used．*6: Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150°C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.

Performance Characteristics (Reference①)● Inductance vs DC Current

MSLLevel△T=40K

PCC-M0648M-LE[6.4×6.0×4.8(mm)]

Series△L=–30%

*5

9.2 12.07.3 9.3

Standard Parts



L0(μH)

Tolerance


(%) *2 *3 *4


4.1 5.2 8.115.00 63.80 (70.18) 3.3 4.2 6.7

3.30

±20

13.10 (14.41)

±10

7.24.70 20.70 (22.77) 5.710.00 40.40 (44.44)

Indu

ctor

s(μ

H)

［ ETQP4M3R3KFN ］

2 64 80

［ ETQP4M100KFN ］

Indu

ctor

s(μ

H)

DC Bias (A)

1 3

14

5

16

Indu

ctor

s(μ

H)



Indu

ctor

s(μ

H)

DC Bias (A)

0 2 64 8

120

4

3

10

1

2

10

7 9


0

86

24

1210

0

43

1

2

56

0

4

20

12

8

16

2 64 80 14 161210

2 64 80 14 161210

38

Power Inductors

Performance Characteristics (Reference②)● Case Temperature vs DC Current



Tem

pera

ture

ris

eΔT

(K)

DC Bias (A)

0

20

40

80

DC Bias (A)

60

Tem

pera

ture

ris

eΔT

(K)

Tem

pera

ture

ris

eΔT

(K)

Tem

pera

ture

ris

eΔT

(K)

DC Bias (A)

71 3 2 45 6

DC Bias (A)





0

20

40

80

60

0

20

40

80

60

0

20

40

80

60

0 2 64 8

0 2 64 8 10 12 14 0 2 64 8 10 12

1 3 50

39

Power Inductors

2. Series PCC-M0748M-LE (ETQP4M□□□KFM)

ETQP4M4R7KFM 1ETQP4M100KFM 1ETQP4M220KFM 1ETQP4M470KFM 1


*3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 30 K/W measured on 7.4×7.0×4.8 mm case size. See also (✽5)*4: Saturation rated current : DC current which causes L(0) drop –30 %.*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used．*6: Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150°C

should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.


Standard Parts



Series△T=40K △L=–30%

L0(μH)

Tolerance


(%) *2 *3 *4

MSLLevel

*5

10.7PCC-M0748M-LE

[7.4×7.0×4.8(mm)]10.00 36.00(39.60) 4.5 6.0 9.622.00 84.10(92.51) 2.9

4.70

±20

16.80(18.48)

±10

6.5 8.8


4.647.00 148.60(163.46) 2.2 2.9 3.7

3.9

Indu

ctor

s(μ

H)

［ ETQP4M4R7KFM ］

2 64 80

［ ETQP4M220KFM ］

Indu

ctor

s(μ

H)

DC Bias (A)

1 3

14

5

16

Indu

ctor

s(μ

H)


Indu

ctor

s(μ

H)

DC Bias (A)

0 2 64 8

120

4

3

12

10

7


05

15

10

0

8

6

2

4

1012

0

2 64 80 14 161210

56

1 3 50 2 4

25

20

30

10

20

30

40

50［ ETQP4M470KFM ］

40

Power Inductors




Tem

pera

ture

ris

e ΔT

(K)

DC Bias (A)

0

20

40

80

DC Bias (A)

60

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

Tem

pera

ture

ris

e ΔT

(K)

DC Bias (A)

71 3 2 45 6

DC Bias (A)

［ ETQP4M4R7KFM ］




0

20

40

80

60

0

20

40

80

60

0

20

40

80

60

0 2 64 8

0 2 64 8 10 12 14 0 2 64 8 10 12

1 3 50 7

41

Power Inductors





(ETQP4M□□□KFN) (ETQP4M□□□KFM)


Series PCC-M0648M-LE Series PCC-M0748M-LE (ETQP4M□□□KFN) (ETQP4M□□□KFM)

Series PCC-M0648M-LE


Series PCC-M0748M-LE

6.4±0.4

1.6±0.4

2.0±

0.2

6.0±

0.4

4.8

max

.

2.0±

0.2

7.0±

0.4

7.4±0.4

1.6±0.4 1.6±0.4 1.6±0.4

4.8

max

.

0.05

min

.

0.05

min

.

7.4 8.4

2.2

2.2

7.0

8.0

7.42.0

8.43.0

SuffixInductance

PolarityDate Code PolarityDate Code

SuffixInductance

42

Power Inductors





5.0t2

PCC-M0648M-LE 6.6 7.1 16 1.75 7.5 12 2 4F P1 P２ P０ φD0 t1

7.5 12 2 41.5 0.4

Series A B W E

PCC-M0748M-LE 7.6 8.1 16 1.75

E W

1.5 0.4 6.0

Series A B C D


PCC-M0748M-LE2 17.5

Quantity per reel

PCC-M0648M-LE330 (100) 13 21

Serise Part No. Minimum Quantity/ Packing Unit

500 pcsPCC-M0648M-LEPCC-M0748M-LE

ETQP4M□□□KFNETQP4M□□□KFM


F

φD0 E

W

t1t2P2 P0

P1

A

B

A

E

φDW

B

C


Term

inal

43

Power Inductors

Power Choke Coil (Automotive Grade)Series : PCC-M0530M-H

PCC-M0630M-H


●Reduce core loss in high frequency band (More than 2 MHz)●High heat resistance : Operation up to 150 °C including self-heating●Low profile : ３ｍｍ max. height●SMD type●High-reliability : High vibration resistance as result of newly developed integral construction ;






Temperature rating

Features


Size□ 5 mm□ 6 mm

CodePN

2.2 μH10 μH

→→

Operating temperature range

2R2100



1 2 3 4 5 6 7 8 9 10 11 12

E T Q P M H FProduct Code Height Winding Inductance Suffix SizeCoreClassification

44

Power Inductors

Series PCC-M0530M-H/PCC-M0630M-H (ETQP3M□□□HFP/ETQP3M□□□HFN)

ETQP3M2R2HFP 1

ETQP3M100HFN 1ETQP3M220HFN 1


*3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 20 K/W measured. See also (✽5)*4: Saturation rated current : DC current which causes L(0) drop –30 %.*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used．*6: Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150°C

should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.



4.03.0 3.7

[6.5×6.0×3.0(mm)]2.1 2.568.0 (74.8)

144.0 (158.4)

±20PCC-M0630M-H

5.2 6.3 PCC-M0530M-H[5.5×5.0×3.0(mm)]

Standard Parts


（ｍΩ）

L0(μH)

Tolerance


(%)

22.0

±20

*2 *3Series

Rated Current (Typ. : A) MSLLevel△T=40K △L=–30%

*4 *5

9.0

5.5

19.5 (21.45)2.2

10.0

Indu

ctor

s(μ

H)

［ ETQP3M2R2HFP ］

2 64 80

Indu

ctor

s(μ

H)

DC Bias (A)

14

Indu

ctor

s (μ

H)

［ ETQP3M100HFN ］

DC Bias (A)

120

8

6

10

12

2

4

10

DC Bias (A)

1 3 50 2 64 87 9

1 3 50 2 64 87

0.5

0

10

15

0

5

20

25

1.5

1.0

2.5

2.0


45

Power Inductors




Tem

pera

ture

ris

e ΔT

(K)

DC Bias (A)

DC Bias (A)

0

20

40

80

60

Tem

pera

ture

ris

e Δ

T(K)

0

20

40

80

60

Tem

pera

ture

ris

e Δ

T(K)

DC Bias (A)1 3 50 2 64 8

［ ETQP3M2R2HFP ］

［ ETQP3M22HFN ］


0

20

40

80

60

7 1 3 50 2 64

1 30 2 4

46

Power Inductors





(ETQP3M□□□HFP) (ETQP3M□□□HFN)


Series PCC-M0530M-H Series PCC-M0630M-H (ETQP3M□□□HFP) (ETQP3M□□□HFN)

Series PCC-M0530M-H


Series PCC-M0630M-H

5.5±0.4 6.5±0.4

5.0±

0.4

6.0±

0.4

1.2±0.4 1.2±0.4

3.0±

0.3

3.0

max

.

0.05

min

.

1.5 1.5

3.0±

0.3

3.0

max

.

0.05

min

.

SuffixInductance

PolarityDate Code

SuffixInductance

PolarityDate Code

6.1

3.6

6.0

7.2

2.2

7.13.

6

7.0

8.8

2.8

47

Power Inductors






1,000 pcs

Quantity per reelMinimum Quantity/ Packing UnitPCC-M0530M-H PCC-M0630M-H

ETQP3M□□□HFPETQP3M□□□HFN


Serise Part No.

2 17.5

Series A B C D E WPCC-M0530M-H

330 (100) 13 21PCC-M0630M-H

3.3PCC-M0630M-H 7.1 6.6 16 1.75

Series A B W E t1

7.5 12 2 41.5 0.41.5 0.4

3.3t2

PCC-M0530M-H 5.6 6.1 16 1.75 7.5 12 2 4F P1 P２ P０ φD0

F

φD0 E

W

t1t2P2 P0

P1

A

B

Series PCC-M0530M-H SeriesPCC-M0630M-H

A

E

φDW

B


Term

inal

C

48

Power Inductors

Power Choke Coil (Automotive Grade)Series : PCC-D1413H(DUST)

Realize high heat resistance, low loss and high reliability with dust core (DUST)

Industrial Property：patents 5 (Pending)

●High heat resistance : Operation up to 150 °C including self-heating●SMD and small package : L 14.7×W 13.2×H 13.1 mm●High-reliability : High vibration resistance as result of newly developed integral construction ;


●High bias current : Excellent inductance stability using ferrous alloy magnetic material●High Vibration proof : 5 Hz to 2 kHz/30 G●High efficiency : Achieve by Low loss Dust core and Edgewise coil with rectangular wire●Shielded construction●AEC-Q200 compliant●RoHS compliant

Recommended Applications ● Driver circuits of fuel injection systems in automotive, driver circuits of diesel common rail injection,

step-up power supplies for motor driver-circuits

● 600 pcs /10 tray


Temperature rating

✽1: Measured at 100 kHz.✽2: Reference Only.✽3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. ※ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150°C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.


Standard Parts

Tc : -40 ℃ to +150 ℃ (Including self-temperature rise)Operating temperature range

Ta : -5 ℃ to +35 ℃ 85%RH max.

△T=40K (A)L0 at 0A (μH) L1 at 10A (μH)

Inductance✽1

Features

Standard Packing Quantity

Storage condition After PWB mountingBefore PWB mounting

6.9ETQPDH240DTV 36.0±30 % (24.0) ✽2 25.8 typ. 50.0 typ.

DCR ACR Rated Current ✽3

Part No. at 20 °C (mΩ) at 20 kHz (mΩ)

1 2 3 4 5 6 7 8 9 10 11 12

E T Q P H DProduct Code Height Winding Inductance Suffix SizeCoreClassification

49

Power Inductors

Performance Characteristics (Reference)● Inductance vs DC Current ● Case Temperature vs DC Current

Dimensions in mm (not to scale) ConnectionDimensional tolerance unless noted : ±0.5

✽None polar character


RecommendResist opening area

✽ Due to bigger part, Thermal Capacity is large and may occure PWB temperature differences during reflow process.Recommended land pattern (Heat absorb) should

Recommend be designed with reflow mountablity.copper pad area



1.9

4.4

10.3510.35

20.6

5 8.

4

Indu

ctor

s(μ

H)

［ ETQPDH240DTV ］

2 64 80

DC Bias (A)1 314 516 0 2 64 812

0 010

510

10 7 9

Tem

pera

ture

ris

eΔT

(K)

［ ETQPDH240DTV ］

P2

P1

P1

P2

15

20

25

3035

40

4550

10

20

3040

50

60

7080

90100

2018

13.2±0.6

14.7

13.1

6.7

min

.

10.53

10.53 2.45

2.45

5.9

DC Bias (A)

SuffixInductance

Date Code

12.6

50

Power Inductors

● Blister Tray (mm) 60 pcs

● Blister Tray Dimention

ETQPDH240DTV

Standard Packing Quantity/Tray

15.1 19 18A Ｂ GFE

Component Placement (Tray)

Packaging Methods (Tray)


Quantity

Part No.152 262

ETQPDH240DTVPart No.

600 pcs /10 Tray (60 pcs / 1 Tray )

DC23 14.8

F

D

C

EB G

A

51

Power Inductors

Soldering Conditions

● Pb free solder recommended temperature profile Power Choke Coils (Automotive Grade)

ETQP3M◻◻◻HFNETQPDH◻◻◻DTV


Reflow soldering conditions

Time ofReflow

ETQP3M◻◻◻KVN ETQP4M◻◻◻KVK ETQP4M◻◻◻KVC

2 times max.

ETQP4M◻◻◻YFP ETQP3M◻◻◻YFN ETQP4M◻◻◻YFN ETQP5M◻◻◻YFM ETQP5M◻◻◻YGM ETQP5M◻◻◻YFKETQP5M◻◻◻YGK ETQP5M◻◻◻YFCETQP5M◻◻◻YGC

T3

ETQP4M◻◻◻KFN ETQP4M◻◻◻KFM ETQP3M◻◻◻HFP

ETQP5M◻◻◻YLC ETQP6M◻◻◻YLC ETQP5M◻◻◻YSK ETQP5M◻◻◻YSC ETQP8M◻◻◻JFA ETQP3M◻◻◻KVP

T3 LimitETQP3M◻◻◻YFP

150 to 170 60 to 120 230 °C 30 to 40 250 °C, 5 s 260 °C, 10 s

Part No. Preheat Soldering Peak TemperatureT1 [°C] t1 [s] T2 [°C] t2 [s]

t1 t2

T1

T2T3

0

Tem

pera

ture

(°C

)

Time

52

Power Inductors

Safety Precautions(Common precautions for Power Choke Coils (Automotive Grade) : Series DUST, Series MC）

・ When using our products, no matter what sort of equipment they might be used for, be sure to make a writtenagreement on the specifications with us in advance. The design and specifications in this catalog are subject tochange without prior notice.

・ Do not use the products beyond the specifications described in this catalog.・ This catalog explains the quality and performance of the products as individual components. Be fore use, check and

evaluate their operations when installed in your products.・ Install the following systems for a failsafe design to ensure safety if these products are to be used in equip ment

where a defect in these products may cause the loss of human life or other significant damage, such as damage tovehicles (au to mo bile, train, vessel), traffic lights, medical equipment, aerospace equipment, elec tric heatingappliances, com bus tion/gas equipment, rotating equipment, and disaster/crime prevention equip ment.

✽ Systems equipped with a protection circuit and a protection device.✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault.

■Precautions for use1. Provision to abnormal condition

This power choke coil itself does not have any protective function in abnormal condition such as overload,short-circuit and open-circuit conditions, etc.Therefore, it shall be confirmed as the end product that there is no risk of smoking, fire, dielectric withstandvoltage, insulation resistance, etc. in abnormal conditions to provide protective devices and/or protection circuitin the end product.

2. Temperature riseTemperature rise of power choke coil depends on the installation condition in end products. It shall be confirmedin the actual end product that temperature rise of power choke coil is in the limit of specified temperature class.

3. Dielectric strengthDielectric withstanding test with higher voltage than specific value will damage Insulating material and shortenits life.

4. WaterThis Power choke coil must not be used in wet condition by water, coffee or any liquid because insulation

5. PottingIf this power choke coil is potted in some compound, coating material of magnet wire might be occasionallydamaged. Please ask us if you intend to pot this power choke coil.

6. ModelWhen this power choke coil is used in a similar or new product to the original one, it might be unable to satisfyhe specifications due to difference of condition of usage.Please ask us if you use this power choke coil in the manner such as above.

7. DropIf the power choke coil receives mechanical stress such as drop, characteristics may become poor (due todamage on coil bobbin, etc.). Never use such stressed power choke coil.

8. Buzz NoiseWhen this coil is used in the frequency band of the audible range (≒ 20 Hz to 20 kHz), or, when using inburst mode, depending on the operating conditions (conditions of the energized waveform) sounds (buzz noise)may occur. Depending on the circuit / board installation environment it may be heard as abnormal sounds,so please check in advance.

9. Solvent (Series MC)If this power choke coil is dipped in the cleaning agent, and the coating agent of the toluene and the xylenesystem, there is a possibility that the performance decreases greatly. Please ask us if you intend to pot this powerchoke coil.

10. Static electricity measures (Series MC)① Circuit designPlease set up the ESD measures parts such as capacitors in the former steps of this power choke coil for staticelectricity when there is a possibility that static electricity is impressed to the choke coil on the circuit.Moreover, please consult our company about such a case once.

01. Oct. 2019

strength becomes very low in such condition.

53

Power Inductors

② Treatment with singleTake countermeasures against static electricity when using single power choke coil. (process and equipment)There is a possibility that the characteristic changes when the voltage of 200 V or more is impressed to thispower choke coil. Please handle 200 V or less.

11. Printed circuit board design① Land pattern and Via which exceed Operating Voltage, should not be placed top layer PWB under the products

for keeping isolation between inside coil and surface of PWB. (Series DUST)② To the opposing part in this power choke coil bottom please install neither pattern nor the beer, etc. (Series MC)

③ Parts arranged around this power choke coil donot touch the surface of this power choke coil(Top side and side). (Series MC)

④ This power choke coil is different from the ferrite core-type that installs general concentration GAP.It has the leakage magnetic bunch distribution of the choke coil to the vertical direction. Please be cautiouswhen using parts and circuit compositions which are easily affected by the leakage flux.

12. Other using emviromentThis power choke coil is not designed for the use in the following, special environment.Therefore, please do not use it in the following special environment.

• Use in place where a lot of causticity gases such as sea breeze, Cl2, H2S, NH3, SO2, and Nox exist.• Use in place where out-of-door exposure and direct sunshine strike.

13. Core Chipping and Core CrackThis choke coil has a possibility to make partial chipping or crack in the core due to excessive mechanical stressfrom outside, and might have initially a partial chipping and/or cracks that do not affect the quality.

14. Keeping environmentIf this power choke coil is kept under following environment and condition, there is a possibility that theperformance and soldering decreases greatly.

• Keep in place where a lot of causticity gases such as sea breeze, Cl2, H2S, NH3, SO2, and Nox exist.• Keep in place where out-of-door exposure and direct sunshine strike.

■AEC-Q200 CompliantThe products are tested based on all or part of the test conditions and methods defined in AEC-Q200.Please consult with Panasonic for the details of the product specification and specific evaluation test results,etc., and please review and approve Panasonic's product specification before ordering.

＜Package markings＞Package markings include the product number, quantity, and country of origin.In principle, the country of origin should be indicated in English.

01. Oct. 2019

(PWB)

The opposing part in the choke coil bottom

Side Top side

Side

The opposing part in the choke coil bottom

8.4

2.810

3.8 8

54


Should a safety concern arise regarding this product, please be sure to contact us immediately.

Power Inductors

E

1 2

Q

3

P 3 L

4 5 6 7 8 9

Product Code InductanceClassification

10 11 12

SuffixPackagingCoreWindingSize

T


Features


● Small type (8.7×7.0×H3.0 mm)● High power (22 A)● Low loss (RDC :1.12 mΩ)● Tighter DCR tolerance (±7 %)● Suitable for high frequency circuit (up to 1 MHz)● Low buzz noise due to its gap-less structure● RoHS compliant

● Notebook PC power supply modules● Servers, Routers, DC/DC converters for driving CPUs

● 3,000 pcs./box (2 reel)

Power Choke Coil

Series : PCC-M0730L (MC)

Small mounting size for multi-phase DC/DC converter circuits

Standard Parts

Standard Packing Quantity (Minimum Quantity/Packing Unit)

(✽1) Inductance is measured at 1.0 MHz.(✽2) Rated current defines actual value of DC current, when temperature rise of coil becomes 40 K. (Method A)(✽3) Rated current defines actual value of DC current, when temperature rise of coil becomes 40 K. (Method B)(✽4) Reference only(✽5) Method A (PANASONIC's standard measurement conditions),

Method B (high heat dissipation measurement) is different from Method A by the measurement methods.In normal application condition, the part's temperature depends on circuit design and heat dissipation condition. This condition shall be verified by the worst operational condition.

Part No.

Inductance (at 20 °C)✽1

Rated current

(A)✽2

Rated current

(ref)

(A)✽3

DC resistance

(at 20 °C)

(mΩ)

L0 at 0A L1 ✽4

(μH) (μH)

Measurement

current

(A)

ETQP3LR24CFM 0.24±20 % (0.19) 22 22 35 1.12±7 %

May. 201502

55



Power Inductors

P2

P1

8.7 max.

3.0 max.

0.01 min.

7.0

±0.3

2.0

2.0

±0.3

P1 P2

2.8 3.6 2.8

2.6

0.00

0.05

0.10

0.15

0.20

0.30

0.25

0.35

0.40

0.45

0 5 10 15 20 25 30

(A)

(uH) ETQP3LR24CFM

0

10

20

30

40

50

60

70

80

90

100

0 5 10 2015 25 30

Idc (A)

Te

mp

. rise

(K

)

ETQP3LR24CFM

Connection

■ As for Packaging Methods, Soldering Conditions and Safety Precautions(Power Choke Coils for Consumer use),Please see Data Files

Recommended land patterns in mm (not to scale)

Performance Characteristics (Reference)

Dimensions in mm (not to scale)

Inductance vs DC Current Case Temperature vs DC Current (Method A)

May. 201502

56



Power Inductors

E

1 2

Q

3

P 4 L

4 5 6 7 8 9


10 11 12


T


Features


● Small type (8.7×7.0×H4.0 mm)● High power (17 A to 24 A)● Low loss (RDC :1.0 to 1.5 mΩ)● Tighter DCR tolerance (±7 %)● Suitable for high frequency circuit (up to 1 MHz)● Low buzz noise due to its gap-less structure● RoHS compliant



Power Choke Coil

Series : PCC-M0740L (MC) Low DCR Type


Standard Parts




Part No.


Rated current

(A)✽2

Rated current

(ref)

(A)✽3

DC resistance

(at 20 °C)

(mΩ)

L0 at 0A L1 ✽4

(μH) (μH)

Measurement

current

(A)

ETQP4LR24AFM 0.24±20 % (0.20) 24 24 35.5 1.00±7 %

ETQP4LR36AFM 0.36±20 % (0.30) 20 20 31.0 1.35±7 %

ETQP4LR42AFM 0.42±20 % (0.35) 17 17 28.5 1.50±7 %

May. 201504

57



Power Inductors

P2

P1

8.7 max.

4.0 max.

0.01 min.

7.0

±0.3

2.0

A

P1 P2

2.8 3.6 2.8

B

0.00

0.05

0.10

0.15

0.20

0.30

0.25

0.35

0.40

0.45

0 5 10 15 20 25 30

(A)

(uH)ETQP4LR36AFMETQP4LR24AFM

0

10

20

30

40

50

60

70

80

90

100

0 5 10 2015 25 30

Idc (A)

Tem

p. rise

(K

)

ETQP4LR42AFMETQP4LR36AFMETQP4LR24AFM

ETQP4LR42AFM

Connection






Part No. A

ETQP4LR24AFM 3.0±0.3

ETQP4LR36AFM2.0±0.3

ETQP4LR42AFM

Part No. B

ETQP4LR24AFM 3.6

ETQP4LR36AFM2.6

ETQP4LR42AFM

May. 201504

58



Power Inductors

E

1 2

Q

3

P 4 L

4 5 6 7 8 9


10 11 12


T


Features


● Small type (11.5×10.0×H4.0 mm)● High power (21 A to 28 A)● Low loss (RDC :0.7 to 1.56 mΩ)● Tighter DCR tolerance (±5 % to ±10 %)● Suitable for high frequency circuit (up to 1 MHz)● Low buzz noise due to its gap-less structure● RoHS compliant

● Servers, Routers, DC/DC converters for driving CPUs● Notebook PC power supply modules

● 2,000 pcs./box (2 reel) : ETQP4LR36WFC, ETQP4LR56WFC, ETQP4LR45XFC● 1,000 pcs./box (2 reel) : ETQP4LR19WFC

Power Choke Coil



Standard Parts


(✽1) Inductance is measured at 100 kHz.(✽2) Rated current defines actual value of DC current, when temperature rise of coil becomes 40 K. (Method A)(✽3) Rated current defines actual value of DC current, when temperature rise of coil becomes 40 K. (Method B)(✽4) Reference only(✽5) Method A (PANASONIC's standard measurement conditions),


Part No.


Rated current(A)✽2

Rated current

(ref)(A)✽3

DC resistance(at 20 °C)

(mΩ)

L0 at 0A L1 L2 (Reference)✽4

(μH) (μH)Measurement

current(A)

(μH)Measurement

current(A)

ETQP4LR19WFC (0.20) 0.19±20 % 21 (0.17) 30 28 38 0.70±10 %

ETQP4LR36WFC (0.37) 0.36±20 % 17 (0.34) 24 24 33 1.10± 5 %

ETQP4LR56WFC (0.60) 0.56±20 % 15 (0.53) 21 21 28 1.56± 5 %

ETQP4LR45XFC 0.45+20% — — (0.38) 25 25 33 1.10± 5 %–25%

May. 201505

59



Power Inductors

P2

P1

11.5 max.

4.0 max.

0.01 min.

10.0

±0.3

2.5

4.0

±0.2

P1 P2

0.0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30

(A)

(uH)

ETQP4LR56WFCETQP4LR36WFCETQP4LR19WFCETQP4LR45XFC

0

10

20

30

40

50

60

70

80

90

100

0 5 10 15 20 25 30

Idc (A)

Tem

p. rise

(K

)

ETQP4LR56WFC

ETQP4LR36WFC / ETQP4LR45XFC

ETQP4LR19WFC

3.8 6.0 3.8

4.6

Connection






May. 201506

60



Power Inductors

E

1 2

Q

3

P 4 L

4 5 6 7 8 9


10 11 12


T


Features


● Small type (11.7×10.0×H4.0 mm)● High power (21 A to 30 A)● Low loss (RDC :0.76 to 1.58 mΩ)● Tighter DCR tolerance (±5 %)● Suitable for high frequency circuit (up to 1 MHz)● Low buzz noise due to its gap-less structure● Shielded construction

● RoHS compliant



Power Choke Coil

Series : PCC-M1040L (MC) Low DCR Type


Standard Parts




Part No.


Rated current

(A)✽2

Rated current

(ref)

(A)✽3

DC resistance

(at 20 °C)

(mΩ)

L0 at 0A L1 ✽4

(μH) (μH)

Measurement

current

(A)

ETQP4LR36AFC 0.36±20 % (0.29) 30 30 40 0.76±5 %

ETQP4LR68XFC 0.68±20 % (0.59) 21 21 28 1.58±5 %

Dec. 201705

61



Power Inductors

P2

P1

11.7 max.

4.0 max.

0.01 min.

10.0

±0.3

2.5

4.0

±0.3

P1 P2

3.8 6.0 3.8

4.6

0.0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0 5 10 15 20 25 30 35 40

(A)

(uH)ETQP4LR36AFCETQP4LR68XFC

0

10

20

30

40

50

60

70

80

90

100

0 5 10 2015 25 30 35 40

Idc (A)

Tem

p. rise

(K

)

ETQP4LR36AFCETQP4LR68XFC

Connection






Dec. 201705

62



Power Inductors

E

1 2

Q

3

P 5 L

4 5 6 7 8 9


10 11 12


T


Features


● High power (25 A to 30 A)● Low loss (RDC :0.8 to 1.1 mΩ)● Narrow RDC tolerance (±5 % to ±7 %)● Low profi le (14.5×12.5×H5.0 mm)● High frequency (up to 1 MHz)● Low buzz noise due to its gap-less structure● RoHS compliant

● Servers, Routers, DC/DC converters for driving CPUs● Notebook PC power supply modules


Power Choke Coil


High power, Low loss, Low-profi le

Standard Parts


Part No.


Rated current(A)

✽2

DC resistance(at 20 °C)

(mΩ)

L1 L2 (Reference)

(μH)Measurement

current(A)

(μH)Measurement

current(A)

ETQP5LR50XFA 0.50±20 % 30 (0.46) 42 30 0.80±7 %

ETQP5LR60XFA 0.60±20 % 30 (0.54) 42 27 1.10±5 %

(✽1) Inductance is measured at 100 kHz.(✽2) Rated current defines actual value of DC current, when temperature rise of coil becomes 40 K.

Oct. 201403

63



Power Inductors

ETQP5LR50XFA

ETQP5LR60XFA

0.0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1.0

0 5 10 15 20 25 30 35 40

IDC (A)

(uH)

ETQP5LR60XFA

ETQP5LR50XFA

0

10

20

30

40

50

60

70

80

90

100

0 5 10 15 20 25 30 35 40 45IDC (A)

Tem

p. rise

(K

)

P2P1

14.5 max.

5.0 max. (2.5)

0.01 min.

12.5

±0.3

4.0

±0.2

3.8

4.6

8.73.8

P2

P1

Connection





Inductance vs DC Current Case Temperature vs DC Current

Oct. 201403

64



Power Inductors

t1t2P0

A

P2fD0

P1

FE

W

B


EC

D

A

B

W

Series M0730L/M0740L/M1040L/

M1250L

Power Choke Coils for consumer use


● Embossed Carrier Tape Dimensions in mm (not to scale)

Series A B W E F P1 P2 P0 fD0 t1 t2

PCC-M0730L 7.6 8.916.0

1.75

7.5 12.0

2.0 4.0 1.5 0.4

4.2

PCC-M0740L 7.6 8.9 4.3

PCC-M1040L 10.6 11.824.0 11.5 16.0

5.2

PCC-M1250L 13.1 14.8 5.3

Series A B C D E WPCC-M0730L/M0740L

380 80 13 21 2

17.5PCC-M1040L

25.4PCC- M1250L

Series Part No. Minimum Quantity / Packing Unit Quantity per reel

PCC-M0730L ETQP3L◻◻◻CFM3,000 pcs. / box (2 reel) 1,500 pcs.

PCC-M0740L ETQP4L◻◻◻AFM

PCC-M1040L

ETQP4L◻◻◻WFC

ETQP4L◻◻◻XFC

ETQP4L◻◻◻AFC

2,000 pcs. / box (2 reel) 1,000 pcs.

PCC-M1040L ETQP4LR19WFC1,000 pcs. / box (2 reel) 500 pcs.

PCC-M1250L ETQP5L◻◻◻XFA


● Power Choke Coils for consumer use

● Power Choke Coils for consumer use

Packaging Methods (Taping)



Dec. 201710

65



Power Inductors

t2

Tem

pe

ratu

re (

°C)

Time

T3

T2

T1

t1

0


● Pb free solder recommended temperature profi le


Refl ow soldering conditions

SeriesPreheat Soldering Peak Temperature Time of

Refl owT1 [°C] t1 [s] T2 [°C] t2 [s] T3 T3 Limit

PCC-M0730LPCC-M0740LPCC-M1040LPCC-M1250L

150 to 170 60 to 120 230 °C 30 to 40 250 °C, 5 s 260 °C, 10 s 2 times max.

Dec. 201710

66

Power Inductors

Safety Precautions(Common precautions for Power Choke Coils for consumer use)・ When using our products, no matter what sort of equipment they might be used for, be sure to make a written

agreement on the specifications with us in advance. The design and specifications in this catalog are subject tochange without prior notice.

・ Do not use the products beyond the specifications described in this catalog.・ This catalog explains the quality and performance of the products as individual components. Be fore use, check and

evaluate their operations when installed in your products.・ Install the following systems for a failsafe design to ensure safety if these products are to be used in equip ment

where a defect in these products may cause the loss of human life or other significant damage, such as damage tovehicles (au to mo bile, train, vessel), traffic lights, medical equipment, aerospace equipment, elec tric heatingappliances, com bus tion/gas equipment, rotating equipment, and disaster/crime prevention equip ment.

✽ Systems equipped with a protection circuit and a protection device.✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault.

Precautions for use1. Provision to abnormal condition

This power choke coil itself does not have any protective function in abnormal condition such as overload,short-circuit and open-circuit conditions, etc.Therefore, it shall be confirmed as the end product that there is no risk of smoking, fire, dielectric withstandvoltage, insulation resistance, etc. in abnormal conditions to provide protective devices and/or protection circuitin the end product.

2. Temperature riseTemperature rise of power choke coil depends on the installation condition in end products. It shall be confirmedin the actual end product that temperature rise of power choke coil is in the limit of specified temperature class.

3. Dielectric strengthDielectric withstanding test with higher voltage than specific value will damage Insulating material and shortenits life.

4. WaterThis Power choke coil must not be used in wet condition by water, coffee or any liquid because insulationstrength becomes very low in such condition.

5. PottingIf this power choke coil is potted in some compound, coating material of magnet wire might be occasionallydamaged. Please ask us if you intend to pot this power choke coil.

6. SolventIf this power choke coil is dipped in the cleaning agent, and the coating agent of the toluene and the xylenesystem, there is a possibility that the performance decreases greatly. Please ask us if you intend to pot this powerchoke coil.

7. Static electricity measures① Circuit designPlease set up the ESD measures parts such as capacitors in the former steps of this power choke coil for staticelectricity when there is a possibility that static electricity is impressed to the choke coil on the circuit.Moreover, please consult our company about such a case once.② Treatment with singleTake countermeasures against static electricity when using single power choke coil. (process and equipment)There is a possibility that the characteristic changes when the voltage of 200 V or more is impressed to thispower choke coil. Please handle 200 V or less.

01. Oct. 2019

67

Power Inductors

8. Core Chipping and Core CrackThis choke coil has a possibility to make partial chipping or crack in the core due to excessive mechanical stressfrom outside, and might have initially a partial chipping and/or cracks that do not affect the quality.

9. Storage temperature-5 °C to +35 °C

10. Operating temperatureMinimum temperature： ‒40 °C（Ambient temperature of the power choke coil）Maximum temperature： 130 °C（Ambient temperature of the power choke coil plus the temperature rise）

100 °C（Only series : PCC‒F126F(N6)）

11. ModelWhen this power choke coil is used in a similar or new product to the original one, it might be unable to satisfyhe specifications due to difference of condition of usage.Please ask us if you use this power choke coil in the manner such as above.

7. DropIf the power choke coil receives mechanical stress such as drop, characteristics may become poor (due todamage on coil bobbin, etc.). Never use such stressed power choke coil.

＜Package markings＞Package markings include the product number, quantity, and country of origin.In principle, the country of origin should be indicated in English.

01. Oct. 2019

68



Voltage Step-up Coils

(3.1) 1.2±0.1

5.5±0.2

1.5±

0.1

0.18

±0.

05

3.3

±0.2

1.2

±0

.1

3.3±0.1

0.6±

0.1

0.85

±0.

10

1

2

3

4

5

(3.3) 1.1±0.2

5.5±0.2

1.65

±0.

20

0.18

±0.

05

0.25

±0.

05

3.3

±0.2

3.3±0.1

0.6±

0.1

0.85

±0.

10

1

2

3

4

5

1.2

±0

.1

(3.3) 1.1±0.2

5.5±0.2

1.4±

0.2

0.18

±0.

05

0.12

5±0.

050

3.3

±0.2

1.2

±0

.1

3.3±0.1

0.6±

0.1

0.85

±0.

10

1

2

3

4

5

(3.1) 1.2±0.1

5.5±0.2

2.0

±0.2

0.18

±0.

05

3.3

±0.2

1.2

±0

.1

3.3±0.1

0.6±

0.1

0.85

±0.

10

1

2

3

4

5

(3.1)4.5±0.2

3.3±0.1

f3.1

±0.2

0.1

0±

0.0

5

3.1

±0.2

1.4

max

.1.2

±0.1 0.8

±0.1

1

2

3

4

5

E

1

L

2

T

3

3

4

K

5

N

6

0

7

0

8

4

9

B

C

f180 Reel

f370 Reel

Product Code Outer size Construction Design No. Packaging

C

10

1.1±

0.1

0.1

0±

0.0

5

3.1

±0.2

2.5

±0.1

1.2

±0.1 0

.8±

0.1

4.5±0.23.3±0.1

2.73±0.10

1

6

4

5

2


Features


Standard Packing Quantity


● Small and thin● High inductance● RoHS compliant

● Piezoelectric buzzer, Booster circuit for EL backlight (Watch, Electric thermometer, Portable device)● HAC inductor (Smartphone, Cellular phone)

● 1,000 or 5,000 pcs./reel


Series : ChipType : 3KN

ELT3KN

Part Name: 1 Core 2 Terminal 3Ring 4 Coil 5 Terminal board 6 Adhesive

● Type 3KN

A

B

C

D

E

H

High inductance Voltage Step-up coil chip series forpiezoelectric buzzers and DC/DC circuitry of EL panels

Oct. 201403

69




Standard Parts

“□” shows the packaging specifications.

Part No.Inductance R. D. C I.D.C

(mA) max.Dimensions

MagneticComposition(mH) Tolerance(%) (Ω) Tolerance(%)

ELT3KN004□ 14.00±40

125±10

1.7

A

Permalloy ringELT3KN007□ 20.00 170 1.4

ELT3KN113□ 1.00

±10

34

±15

25.0

Brass ringELT3KN126□ 1.50 49 29.0

ELT3KN142□ 0.82 24 30.0

ELT3KN019□ 14.00 ±40 125 ±10 1.7

B

Permalloy ring

ELT3KN109□ 3.80±10

115 ±20 15.0Brass ring

ELT3KN114□ 2.50 83±15

15.0

ELT3KN014□ 30.00±40

150 1.9

C

Permalloy ringELT3KN018□ 35.00 235 ±10 1.9

ELT3KN028□ 50.00 ±35 250±15

1.4

ELT3KN032□ 25.00 ±40 185 10.0

ELT3KN101□ 10.00

±10

285 ±10 1.4

Brass ring

ELT3KN104□ 1.00 35

±15

30.0

ELT3KN118□ 2.50 64 20.0

ELT3KN121□ 1.00 22.5 40.0

ELT3KN122□ 2.00 44 20.0

ELT3KN123□ 1.00 25 30.0

ELT3KN124□ 4.00 85 15.0

ELT3KN127□ 0.47 14 50.0

ELT3KN128□ 0.56 15 45.0

ELT3KN129□ 0.68 17 34.0

ELT3KN130□ 2.30 51 23.0

ELT3KN131□ 2.00 44 20.0

ELT3KN020□ 30.00 ±30 150 2.5

D

Permalloy ring

ELT3KN111□ 7.50±10

177 10.0Brass ring

ELT3KN125□ 4.00 85 15.0

ELT3KN041□ 14.00

±40

125

±10

1.7

E

Permalloy ringELT3KN042□ 20.00 175 1.4

ELT3KN043□ 12.00 117 1.7

ELT3KN139□ 0.68

±10

19

±15

40.0

Brass ring

ELT3KN140□ 0.82 22 30.0

ELT3KN135□ 1.10 32 30.0

ELT3KN136□ 2.00 55 20.0

ELT3KN137□ 4.00 117 ±10 15.0

ELT3KN149□ 0.33 11

±15

60.0

ELT3KN151□ 0.56 17 50.0

ELT3KN152□ 0.47 14 50.0

ELT3KN155□ 1.10 38 25.0 H Ring less

ELT3KN162□ 4.00 117 ±10 15.0E Brass ring

ELT3KN163□ 1.10 32 ±15 30.0

Oct. 201403

70




t1

t2Chip component P1 P3

Chip pocket


EF

W

Sprocket hole

A

B

fD0

P2

T

C

E

D

B

W tA

200 min. 50 min.

Leader part

Tape end

50 min.

Vacant position

Vacant position

Vi

Vi

SC Vo

Vo

+1.5 V

For buzzer

Vi

ViV1 V2

SC

V1

V2

+3.0 V

Load

For EL DC/DC

Packaging Methods

Applied Diagram Examples

● Standard Packing Quantity ● Embossed Carrier Tape Dimensions in mm (not to scale)

● Reel Dimensions in mm (not to scale)

● Leader Part, Vacant Position

Packaging ELT3KN Kind of Taping

B 1,000 pcs. Embossed Carrier

TapingC 5,000 pcs.

Part No. A B W F E P1

ELT3KN 3.7 6.4 12.0 5.5 1.75 8.0

Part No. P2 P3 0D0 t1 t2

ELT3KN 2.0 4.0 1.5 0.3 2.6

Packaging A B C D E W t T

B 180 60 13 21 2 13 1.1 15.2

C 370 60 13 21 2 14 2.0 18

Oct. 201402

71




t2

Tem

pe

ratu

re (

°C)

Time

T3

T2

T1

t1

0

Refl ow soldering conditions


● Pb free solder recommended temperature profi le

Part No.Preheat Soldering Peak Temperature

Time of

Refl owT1 [°C] t1 [s] T2 [°C] t2 [s] T3 T3 Limit

ELT3KN 150 to 170 60 to 120 230 °C 30 max. 245 °C, 10 s 260 °C, 10 s 2 times max.

Oct. 201402

72




Don’t Press

Wiring Tab

Precautions for use

1. Operation range and environments1 These products are designed and manufactured for general and stan dard use in general elec tron ic

equipment (e.g. AV equipment, home electric ap pli anc es, office equipment, information and com mu ni ca tionequipment)

2 These products are not designed for the use in the following special conditions. Be fore using the products, care ful ly check the effects on their quality and performance, and determine whether or not they can be used.• In liquid, such as water, oil, chemicals, or organic solvent• In direct sunlight, outdoors, or in dust• In salty air or air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2

• In an environment where these products cause dew condensation

2. Handling1 Do not bring magnets or magnetized materials close to the product. The influence of their magnetic field can

change the inductance value.2 Do not apply strong mechanical shocks by either dropping or collision with other parts.

Excessive schock can damage the part.

3. Resoldering with a soldering iron1 Resoldering should be done within 3 seconds by soldering iron, the temperature with 350 °C or less and should be cooling

down after ward. Both side of terminals shall be fixed closely to PWB. And terminals shall not be pressed in heating.

Safety Precautions(Common precautions for Voltage Step-up Coils)

• When using our products, no matter what sort of equipment they might be used for, be sure to make a writtenagreement on the specifications with us in advance. The design and specifications in this catalog are subjectto change without prior notice.

• Do not use the products beyond the specifications described in this catalog.• This catalog explains the quality and performance of the products as individual components. Be fore use, check

and evaluate their operations when installed in your products.• Install the following systems for a failsafe design to ensure safety if these products are to be used in equip ment

where a defect in these products may cause the loss of human life or other significant damage, such as damageto vehicles (au to mo bile, train, vessel), traffic lights, medical equipment, aerospace equipment, elec tric heatingap pli anc es, com bus tion/gas equipment, rotating equipment, and disaster/crime prevention equip ment.

✽ Systems equipped with a protection circuit and a protection device✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault

<Package markings>Package markings include the product number, quantity, and country of origin.In principle, the country of origin should be indicated in English.

2 The wiring tab shall not be held by sharp-edged tool.

3 Iron shall not be put to the component itself.

4. Mounting side

1 External force must be less than 4.9N while mounting.2 The wiring tab is expose the terminal, so please be careful when you design PWB pattern of coil

circumference.

5. CleaningIf you clean the inductor, please use own your ultrasonic cleaning to check specified conditions.

6. Storage conditionsNormal temperature (–5 to 35 °C), normal humidity (85 % RH max.), shall not be exposed to direct sunlight andharmful gases and care should be taken so as not to cause dew.

Oct. 201402

73

Please contact Factory

CAUTION AND WARNING

The information in this catalog is valid as of March 2020.

Device Solutions Business DivisionIndustrial Solutions Company

1. The electronic components contained in this catalog are designed and produced for use in home electric appliances, office equipment, information equipment,communications equipment, and other general purpose electronic devices. Before use of any of these components for equipment that requires a high degree of safety, such as medical instruments, aerospace equipment, disaster-prevention equipment, security equipment, vehicles (automobile, train, vessel), please be sure to contact our sales representative corporation.

2. When applying one of these components for equipment requiring a high degree of safety, no matter what sort of application it might be, be sure to install a protective circuit or redundancy arrangement to enhance the safety of your equipment. In addition, please carry out the safety test on your own responsibility.

3. When using our products, no matter what sort of equipment they might be used for, be sure to make a written agreement on the specifications with us in advance.

4. Technical information contained in this catalog is intended to convey examples of typical performances and or applications and is not intended to make any warranty with respect to the intellectual property rights or any other related rights of our company or any third parties nor grant any license under such rights.

5. In order to export products in this catalog, the exporter may be subject to the export license requirement under the Foreign Exchange and Foreign Trade Law of Japan.

6. No ozone-depleting substances (ODSs) under the Montreal Protocol are used in the manufacturing processes of Automotive & Industrial Systems Company, Panasonic Corporation.

Documents

CATALOG Inductors - Panasonic · ETQ P5M Y ETQ P6M Y ... Safety Precautions (PCC for automotive use) 49 PCC-M0730L (MC) for consumer use ETQ P3L 51 PCC-M0740L (MC) Low DCR Type for