Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
Catalog–Trauma2011
Instruments and implants approved by the AO Foundation
Implants
Instruments
Sets
Illustrations not actual size
5/11
2-1IM
Nails
690.109 Titanium Elastic Nail System Graphic Case
Instruments312.46 4.5 mm/3.2 mm Double Drill Sleeve315.28 2.7 mm Three-Fluted Drill Bit, 125 mm315.29 3.2 mm Three-Fluted Drill Bit, 195 mm315.48 4.5 mm Three-Fluted Drill Bit, 195 mm321.25 Spanner Wrench359.205 Standard Tamp359.206 Beveled Tamp359.207 Bar, for Small F-Tool359.208 Threaded Rod, for Small F-Tool, 3 ea.359.213 Awl, for use with Titanium Elastic Nails359.218 Hammer Guide, for Titanium Elastic Nails359.219 Inserter, for use with Titanium Elastic Nails359.222 Inserter, for Titanium Elastic Nail End Cap359.224 Locking Pliers, long359.225 Locking Slide Hammer, 400 grams
Implants 475.900 Titanium End Cap for Titanium Elastic Nail
3.0 mm–4.0 mm diameters, 10 ea.475.915 1.5 mm Titanium Elastic Nail, 300 mm, 6 ea.475.920 2.0 mm Titanium Elastic Nail, 440 mm, 6 ea.475.925 2.5 mm Titanium Elastic Nail, 440 mm, 6 ea.475.930 3.0 mm Titanium Elastic Nail, 440 mm, 6 ea.475.935 3.5 mm Titanium Elastic Nail, 440 mm, 6 ea.475.940 4.0 mm Titanium Elastic Nail, 440 mm, 6 ea.
Titanium Elastic Nail Instrument and Implant Set
105.71 Titanium Elastic Nail Instrument and Implant Set
Also available: Titanium Elastic Nail Instrument and Implant Set—sterile (105.71S), With sterile-packaged implantsPlate-Bending Press (329.30), Cutter (359.217), Universal Chuck with T-Handle (393.10)
R
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-2IM Nai
lsOlecranon Osteotomy Nail Set
01.007.002 Olecranon Osteotomy Nail Set
60.007.002 Graphic Case, for Olecranon Osteotomy Nailing System
Instruments03.007.006 6 mm Stepped Opening Drill Bit03.007.007 Opening Drill Sleeve03.007.008 Nail Inserter03.007.009 Aiming Arm03.007.010 Aiming Arm Pinch Screw03.007.011 Alignment Tool03.007.012 8.0 mm/5.5 mm Protection Sleeve03.007.013 5.5 mm/ 2.4 mm Drill Sleeve03.007.014 T8 Stardrive Screwdriver with Stop03.007.015 5 mm Ball Hex Screwdriver03.007.016 Screw Measuring Device03.007.017 Hollow reamer, Large, Quick Coupling03.007.018 Conical Extraction Screw, Small, Quick Coupling03.007.019 Nail Removal Alignment Drill03.007.020 2.8 mm Guide Wire, 180 mm length, threaded 10 mm, trocar point, 5 ea.03.007.021 T8 StarDrive Screwdriver Shaft, Small, Quick Coupling03.007.024 2.4 mm Drill Bit, quick coupling, 186 mm, 2 ea.03.007.025 Depth Gauge for 2.7 mm Screws03.010.104 4.2 mm Three-Fluted Drill Bit, quick coupling, needle point, 145 mm309.039 Extraction Bolt, for 3.5 mm Cortex, 3.5 mm Cannulated and 4.0 mm Cancellous Bone Screws309.069 Extraction Bolt, for 6.5 mm Cancellous Bone and 7.0 mm Cannulated Screws311.44 T-Handle, with quick coupling319.97 Screw Forceps321.17 4.5 mm Pin Wrench, 120 mm321.20 Ratchet Wrench, 11 mm width across flats360.03 8.0 mm Cannulated Drill Bit, large quick coupling, 190 mm, 2.7 mm cannulation
Implants02.007.000S Olecranon Osteotomy Nail and Endcap, sterile, 2 ea.
02.007.012S– 2.7 mm Threaded Stepped Screws, for Olecranon Osteotomy Nail, sterile02.007.050S 3 ea.: 12 mm–50 mm (2 mm increments)
Illustrations not actual size
5/11
2-3IM
Nails
Humeral Nail–EX Instrument and Titanium Implant Set
01.001.300 Humeral Nail–EX Instrument and Titanium Implant Set
69.001.300 Cannulated Humeral Nail-EX Instrument and Implant Set Graphic Case
Instruments292.26 2.5 mm Kirschner Wire, with trocar point, 285 mm (1 pkg. of 10)310.44 4.5 mm Drill Bit, quick coupling, 145 mm, 2 ea.319.97 Screw Forceps321.16 Combination Wrench, 11 mm width across flats, 2 ea.321.17 4.5 mm Pin Wrench, 120 mm332.062 Router, quick coupling, 130 mm358.682 9.5 mm Conical Burr, quick coupling358.696 Spiral Blade Inserter, for Titanium Humeral Nails358.697 Spiral Blade Coupling Screw, for Titanium Humeral Nails360.05 10.0 mm Cannulated Drill Bit, large quick coupling, 190 mm393.105 Small Universal Chuck with T-Handle03.010.022 Radiographic Ruler, for Titanium Cannulated Humeral Nails03.010.023 Radiographic Canal Width Estimator03.010.024 Holding Device for Guide Wires and Reaming Rods03.010.025 2.0 mm Kirschner Wire, with trocar point, 240 mm, 3 ea.03.010.038 10.0 mm Protection Sleeve03.010.039 10.0 mm Cannulated Awl
R
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-4IM Nai
lsHumeral Nail–EX Instrument and Titanium Implant Set
01.001.300 Humeral Nail–EX Instrument and Titanium Implant Set— continued
03.010.053 Cannulated Connecting Screw, for Titanium Cannulated Humeral Nails-EX03.010.054 Insertion Handle, for Titanium Cannulated Humeral Nails-EX03.010.055 Spiral Blade Aiming Arm, for Titanium Cannulated Humeral Nails-EX03.010.058 Slide/Fixed Hammer, 400 grams03.010.059 Hammer Guide for Slide Hammer, 400 grams03.010.060 3.2 mm Three-Fluted Drill Bit, quick coupling, 330 mm, 100 mm calibration, 2 ea.03.010.063 12.0 mm/8.0 mm Protection Sleeve03.010.064 8.0 mm/3.2 mm Drill Sleeve03.010.069 3.2 mm Trocar03.010.072 Depth Gauge for 18 mm to 100 mm Locking Screws03.010.086 14.0 mm/8.0 mm Drill Sleeve03.010.087 8.0 mm/2.0 mm Wire Guide03.010.088 2.0 mm Trocar, 150 mm03.010.089 4.5 mm Cannulated Drill Bit, Jacobs chuck, with 135 mm stop, 165 mm, 2 ea.03.010.090 Spiral Blade Measuring Device, for Titanium Cannulated Humeral Nails-EX03.010.091 Standard Aiming Arm, for Titanium Cannulated Humeral Nails-EX03.010.103 3.2 mm Three-Fluted Drill Bit, quick coupling, 145 mm, 2 ea.03.010.106 Direct Measuring Device, for 18 mm to 100 mm Locking Screws03.010.107 StarDrive Screwdriver, T25 StarDrive, 290 mm03.010.112 Holding Sleeve with Locking Device03.010.113 Compression Device, for Titanium Cannulated Humeral Nails-EX
Implants462.634– Titanium Spiral Blades462.654 2 ea.: 34 mm-54 mm (2 mm increments)04.001.000– Titanium End Caps, with T25 StarDrive recess04.001.003 2 ea.: 0, 5, 10 and 15 mm extension04.005.408– 4.0 mm Titanium Locking Screws, with T25 StarDrive recess04.005.450 2 ea.: 18 mm-60 mm (2 mm increments)
Also available: Titanium Cannulated Humeral Nails–EX, 7.0 mm–11.0 mm diameters,190 mm–320 mm lengths, sterile (04.001.218S–04.001.644S)
Titanium Cannulated Proximal Humeral Nails–EX, 7.0 mm–11.0 mm diameters, 150 mm length, sterile (04.001.210S–04.001.610S)
Titanium End Caps, T25 StarDrive, for Humeral Nails–EX,0 mm–15 mm extension, non-locking, sterile (04.001.007S–010S)
Illustrations not actual size
5/11
R
2-5IM
Nails
Humeral Medullary Reamer Set
105.596 Humeral Medullary Reamer Set
304.598 Humeral Medullary Reamer Set Graphic Case
Instruments359.106 6.0 mm Flexible Medullary Reamer, flat wire, 385 mm length359.107 6.5 mm Flexible Medullary Reamer, flat wire, 385 mm length359.108 7.0 mm Flexible Medullary Reamer, flat wire, 385 mm length359.109 7.5 mm Flexible Medullary Reamer, flat wire, 385 mm length359.110 8.0 mm Flexible Medullary Reamer, flat wire, 385 mm length359.111 8.5 mm Flexible Medullary Reamer, flat wire, 385 mm length359.112 9.0 mm Flexible Medullary Reamer, flat wire, 385 mm length359.113 9.5 mm Flexible Medullary Reamer, flat wire, 385 mm length359.114 10.0 mm Flexible Medullary Reamer, flat wire, 385 mm length359.115 10.5 mm Flexible Medullary Reamer, flat wire, 385 mm length
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-6IM Nai
lsTibial Nail–EX Instrument and Titanium Implant Set
01.004.300 Tibial Nail–EX Instrument and Titanium Implant Set
69.004.300 Tibial Nail-EX Instrument Set Graphic Case690.504 Locking Screw Rack for Tibial Nail-EX Implants
Instruments03.010.015 Compression Device, for Titanium Cannulated
Tibial Nails-EX03.010.021 Radiographic Ruler, for Titanium Cannulated
Tibial Nails03.010.023 Radiographic Canal Width Estimator,
for IM Nails03.010.024 Holding Device for Guide Wires and Reaming
Rods03.010.035 12.0 mm Protection Sleeve03.010.036 12.0 mm Cannulated Drill Bit, large
quick coupling, 190 mm03.010.040 12.0 mm Cannulated Awl03.010.044 Cannulated Connecting Screw, for Standard
Insertion Handle, 2 ea.03.010.045 Standard Insertion Handle03.010.047 Driving Cap with Handle Adapter03.010.052 Aiming Arm, for Titanium Cannulated
Tibial Nails-EX03.010.056 Slide/Fixed Hammer, 700 Grams03.010.060 3.2 mm Three-Fluted Drill Bit, quick coupling,
330 mm, 100 mm calibration, 2 ea.03.010.061 4.2 mm Three-Fluted Drill Bit, quick coupling,
330 mm, 100 mm calibration, 2 ea.03.010.063 12.0 mm/8.0 mm Protection Sleeve, 188 mm03.010.064 8.0 mm/3.2 mm Drill Sleeve, 200 mm
03.010.065 8.0 mm/4.2 mm Drill Sleeve, 200 mm03.010.069 3.2 mm Trocar, 210 mm03.010.070 4.2 mm Trocar, 210 mm03.010.072 Depth Gauge, for locking screws to 100 mm03.010.092 Ball Hex Screwdriver, 8 mm03.010.093 Reaming Rod Push Rod, with ball handle03.010.103 3.2 mm Three-Fluted Drill Bit, quick coupling,
145 mm, 2 ea.03.010.104 4.2 mm Three-Fluted Drill Bit, quick coupling,
145 mm, 2 ea.03.010.106 Direct Measuring Device, for locking screws to
100 mm03.010.107 StarDrive Screwdriver, T25, self-retaining03.010.110 Cannulated StarDrive Screwdriver, T40,
self-retaining03.010.112 Holding Sleeve, with Locking Device321.17 4.5 mm Pin Wrench, 120 mm, 2 ea.321.20 Ratchet Wrench, 11 mm width across flats357.133 Extraction Screw, for Titanium Femoral
and Tibial Nails357.22 Hammer Guide, for Slide Hammer357.398 Cannulated Shaft with 8 mm hex, 125 mm357.399 3.2 mm Guide Wire, 400 mm, 3 ea.319.97 Screw Forceps
Illustrations not actual size
5/11
R
2-7IM
Nails
Tibial Nail–EX Instrument and Titanium Implant Set
01.004.300 Tibial Nail–EX Instrument and Titanium Implant Set— continued
Implants04.004.000– Titanium End Caps, with T40 StarDrive recess 04.004.003 2 ea.: 0, 5, 10, 15 mm extension04.005.416– 4.0 mm Titanium Locking Screws, with T25 StarDrive recess04.005.470 2 ea.: 26 mm–80 mm (2 mm increments)04.005.516– 5.0 mm Titanium Locking Screws, with T25 StarDrive recess, 04.005.570 2 ea.: 26 mm–80 mm (2 mm increments)04.015.520– 5.0 mm Titanium Dual Core Locking Screws, with T25 StarDrive recess04.015.580 2 ea.: 30 mm–90 mm (5 mm increments)
Also available: Tibial Nail-EX Instrument Set (01.004.303)Tibial Nail-EX Implant Set (01.004.304)Titanium Cannulated Tibial Nails-EX, 8 mm-13 mm dia., 255 mm–435 mm lengths,
sterile (04.004.231S–04.004.767S)Titanium Cannulated Tibial Nails–EX, with proximal bend, 8 mm–13 mm diameters,
255 mm–435 mm lengths, sterile (04.034.231S–04.034.767S)5.0 mm Ttitanium Locking Screws, 85 mm–100 mm (04.005.575–04.005.590)
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-8IM Nai
lsTitanium Tibial Nail Insertion and Locking Set105.570 Titanium Tibial Nail Insertion and Locking Set, with locking bolts105.572 Titanium Tibial Nail Insertion and Locking Set, with locking screws
304.580 Titanium Tibial Nail Insertion and Locking Set Graphic Case
Instruments314.11 Holding Sleeve314.75 Hexagonal Screwdriver315.31 3.2 mm Three-Fluted Drill Bit, quick coupling,
145 mm, 2 ea.315.40 4.0 mm Three-Fluted Drill Bit, quick coupling,
195 mm, 2 ea.319.97 Screw Forceps321.16 Combination Wrench, 11 mm width across flats332.20 Slotted Hammer900.723 2.5 mm Threaded Guide Wire, 230 mm, 4 ea.355.14 Cannulated Socket Wrench, 11 mm width
across flats355.18 Driving Head355.70 11.0 mm/8.0 mm Protection Sleeve355.72 8.0 mm/3.2 mm Drill Sleeve, 104 mm355.75 8.0 mm Trocar356.49 Inserter-Extractor
356.511 Titanium Tibial Nail Insertion Handle356.521 Titanium Tibial Nail Aiming Arm356.542 Insertion Bolt for Solid Tibial Nail, 2 ea.356.543 Extraction Screw for Titanium Tibial Nail, 2 ea.356.544 Insertion Bolt for Titanium Cannulated Tibial Nail,
2 ea.356.55 Medullary Canal Length Gauge356.59 Radiographic Ruler for Tibial Nails356.97 3.2 mm Three-Fluted Calibrated Drill Bit,
quick coupling, 215 mm, 80 mm calibration, 2 ea.356.982 4.0 mm Three-Fluted Calibrated Drill Bit,
quick coupling, 215 mm, 80 mm calibration, 2 ea.357.711 8.0 mm/4.0 mm Drill Sleeve, 105 mm357.792 Locking Bolt Measuring Device360.06 11.0 mm Cannulated Drill Bit, 190 mm360.17 12 mm Drill Sleeve
Implants in both sets458.10 Titanium End Cap for Solid Tibial Nails, 5 ea.458.110 Titanium End Cap 15 mm Extension,
for Titanium Solid Tibial Nails, 3 ea.458.120 Titanium End Cap for Titanium Cannulated
Tibial Nails, 5 ea.
Implants in Set 105.570458.26– 3.9 mm Titanium Locking Bolts458.80 2 ea.: 26 mm–80 mm459.26– 4.9 mm Titanium Locking Bolts459.80 2 ea.: 26 mm–80 mm
Also available: 4.0 mm/5.0 mm Titanium Locking Screw Set for IM Nails (145.175) in Graphic Case (305.579)Titanium Solid Tibial Nails, 8 mm–10 mm diameters (478.xxx, 479.xxx, 476.xxx)Titanium Cannulated Tibial Nails, 10 mm–13 mm diameters (485.xxx)
Implants in Set 105.572458.826– 4.0 mm Titanium Locking Screws458.880 2 ea.: 26 mm–80 mm458.926– 5.0 mm Titanium Locking Screws458.980 2 ea.: 26 mm–80 mm
Illustrations not actual size
5/11
R
2-9IM
Nails
105.641 Titanium Trochanteric Fixation Nail Insertion Set
Titanium Trochanteric Fixation Nail Insertion Set
690.339 Titanium Trochanteric Fixation Nail Insertion Set Graphic Case
Instruments321.20 Ratchet Wrench, 11 mm width across flats321.25 Spanner Wrench351.05 Tissue Protector357.22 Hammer Guide, for Slide Hammer357.25 Slide Hammer, for Hammer Guide357.391 Radiographic Ruler, for Trochanteric Fixation Nails357.392 17.0 mm/3.2 mm Wire Guide, 161 mm357.393 3.2 mm Trocar, 172 mm357.394 17.0 mm Cannulated Drill Bit, large quick coupling, 300 mm357.395 Driving Cap, for 357.411357.397 Cannulated Connecting Screw, for Trochanteric Fixation Nails, 2 ea.357.398 Cannulated Shaft, with 8 mm hex, 125 mm357.399 3.2 mm Guide Wire, 400 mm, 10 ea.357.410 22.0 mm/17.0 mm Protection Sleeve357.411 Insertion Handle, for Trochanteric Fixation Nails357.412 Cannulated Reverse Awl357.515 Ball Hex Screwdriver, 8 mm, for Titanium Femoral Nails360.255 Reaming Rod Measuring Device393.10 Universal Chuck with T-Handle399.42 Hammer, 500 grams
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-10IM Nai
lsTitanium Trochanteric Fixation Nail Locking Sets105.642 Titanium Trochanteric Fixation Nail Locking Set, with locking bolts105.643 Titanium Trochanteric Fixation Nail Locking Set, with locking screws
Instruments314.11 Holding Sleeve314.75 Hexagonal Screwdriver315.40 4.0 mm Three-Fluted Drill Bit,
quick coupling, 195 mm, 2 ea.357.365 125° Aiming Arm, for Trochanteric Fixation Nails357.366 130° Aiming Arm, for Trochanteric Fixation Nails357.367 135° Aiming Arm, for Trochanteric Fixation Nails357.369 Blade Guide Sleeve, for Trochanteric Fixation Nails357.371 Buttress/Compression Nut, for 357.369357.372 Helical Blade Inserter357.377 Helical Blade Coupling Screw357.378 Helical Blade Extractor357.381 11.0 mm/3.2 mm Wire Guide, 222 mm357.383 3.2 mm Trocar, 232 mm357.385 Helical Blade Measuring Device357.386 11.0 mm/8.0 mm Protection Sleeve, 153 mm357.387 4.0 mm Trocar, 176 mm357.389 8.0 mm/4.0 mm Drill Sleeve, 164 mm357.396 Extraction Screw, for Trochanteric Fixation Nails357.402 Locking Bolt Measuring Device, for Trochanteric
Fixation Nails357.403 6.0 mm/10.0 mm Stepped Drill Bit Cannulated,
large quick coupling, 435 mm357.404 11.0 mm Tapered Drill Bit Cannulated,
large quick coupling, 280 mm357.405 Drill Stop357.406 5.0 mm Flexible Hexagonal Screwdriver357.407 4.0 mm Three-Fluted Drill Bit, quick coupling,
260 mm, 65 mm calibration, 2 ea.
357.408 Cleaning Stylet357.409 Cleaning Brush357.413 5.6 mm/3.2 mm Drill Guide, 198 mm357.414 11 mm Cannulated Hexagonal Socket357.415 5.0 mm Hexagonal Shaft, 210 mm357.92 Miss-A-Nail Aiming Jig360.253 Holding Sleeve Locking Device
Implants in Set 105.642456.301– 11.0 mm Titanium Helical Blades456.309 1 ea.: 80 mm–120 mm (5 mm increments)
Titanium End Caps, for Trochanteric Fixation Nails456.311 0 mm ext, 2 ea.456.312 5 mm ext, 2 ea.456.313 10 mm ext, 2 ea.459.26– 4.9 mm Titanium Locking Bolts459.100 2 ea.: 26 mm–100 mm
Implants in Set 105.643456.301– 11.0 mm Titanium Helical Blades456.309 1 ea.: 80 mm–120 mm (5 mm increments)
Titanium End Caps, for Trochanteric Fixation Nails456.311 0 mm ext, 2 ea.456.312 5 mm ext, 2 ea.456.313 10 mm ext, 2 ea.458.926– 5.0 mm Titanium Locking Screws458.999 2 ea.: 26 mm–100 mm
690.340 Titanium Trochanteric Fixation Nail Locking Set Graphic Case
Also available: Titanium Cannulated Trochanteric Fixation Nails, 10 mm–14 mm diameters, sterile (456.314S–456.647S)
Illustrations not actual size
5/11
R
2-11IM
Nails
Titanium Trochanteric Fixation Nail Auxiliary Instrument Set
105.646 Titanium Trochanteric Fixation Nail Auxiliary Instrument Set
690.474 Titanium Trochanteric Fixation Nail Auxillary Instrument Set Graphic Case
Instruments03.010.412 Guide Wire Aiming Device for Trochanteric Fixation Nail, for anterior posterior orientation03.010.415 Connecting Screw for Guide Wire Aiming Device, for Trochanteric Fixation Nail, 2 ea.03.010.427 Curved Awl, 8 mm intramedullary reduction tool03.010.471 Guide Wire Aiming Device Offset Block321.17 4.5 mm Pin Wrench, 120 mm357.052 Trochanteric Fixation Nail Screw Compression Nut357.418 Percutaneous Insertion Handle for Trochanteric Fixation Nails357.419 Percutaneous Cannulated Connecting Screw, for Trochanteric Fixation Nails357.420 Conical Extraction Bolt, for Trochanteric Fixation Nails357.421 Extraction Screw Guide, for Trochanteric Fixation Nails357.427 5.0 mm Hexagonal Screwdriver357.428 Trochanteric Fixation Nail Screw Inserter/Extractor357.430 Tap/Reamer for Trochanteric Fixation Nail Screw
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-12IM Nai
lsSureLock Instrument Set
01.010.201 SureLock Instrument Set
60.010.002 SureLock Graphic Case6503 SureLock Label for C-Arm6504 SureLock Template for screen
Instruments03.010.061 4.2 mm Three-Fluted Drill Bit, quick coupling, 330 mm, 100 mm calibration, 2 ea.03.010.063 12.0 mm/8.0 mm Protection Sleeve, 188 mm, 2 ea.03.010.065 8.0 mm/4.2 mm Drill Sleeve, 200 mm, 2 ea.03.010.070 4.2 mm Trocar, 210 mm, 2 ea.03.010.072 Depth Gauge, for Locking Screws to 100 mm for IM Nails03.010.150 Star/HexDrive ScrewdriverT25, 3.5 mm Hexagonal, self-retaining03.010.200 SureLock Aiming Arm, for Antegrade Femoral Nails03.010.201 SureLock Connector, left, for Antegrade Femoral Nails03.010.202 SureLock Connector, right, for Antegrade Femoral Nails03.010.203 Adjustment Knob for SureLock, for Antegrade Femoral Nails, 2 ea.03.010.204 Calibration Pin, 12 mm diameter, 2 ea.321.16 Combination Wrench, 11 mm width across flats
Illustrations not actual size
5/11
R
2-13IM
Nails
Adolescent Lateral Entry Femoral Nail–EX Instrument Set
01.031.001 Adolescent Lateral Entry Femoral Nail–EX Instrument Set
60.031.001 Graphic Case for Adolescent Lateral Entry Femoral Nail–EX Instruments
Instruments03.010.020 Radiographic Ruler, for Titanium Cannulated
Femoral Nails03.010.023 Radiographic Canal Width Estimator,
for IM Nails03.010.024 Holding Device, for Guide Wires and Reaming
Rods03.010.031 13.0 mm/3.2 mm Wire Guide with trocar tip03.010.041 14.0 mm Cannulated Awl03.010.044 Cannulated Connecting Screw, for Standard
Insertion Handle (03.010.045), 2 ea.03.010.047 Driving Cap with Handle Adapter03.010.056 Slide/Fixed Hammer, 700 grams03.010.060 3.2 mm Three-Fluted Drill Bit, quick coupling,
330 mm, 100 mm calibration, 2 ea.03.010.063 12.0 mm/8.0 mm Protection Sleeve188 mm03.010.064 8.0 mm/3.2 mm Drill Sleeve200 mm03.010.069 3.2 mm Trocar03.010.072 Depth Gauge, for Locking Screws to 100 mm
for IM Nails03.010.075 11.5 mm/8.5 mm Protection Sleeve,
for Recon Locking, 2 ea.03.010.076 8.5 mm/3.2 mm Wire Guide, for Recon
Locking, 2 ea.03.010.077 3.2 mm Trocar, for Recon Locking, 2 ea.03.010.079 Drill Stop, for 4.5 mm/6.5 mm Stepped Drill Bit
(03.010.078), for Recon Locking03.010.085 Specialty Locking Measuring Device, for
Titanium Femoral Nails–EX03.010.092 Ball Hex Screwdriver, 8 mm03.010.093 Reaming Rod Push Rod, with Ball Handle
03.010.103 3.2 mm Three-Fluted Drill Bit, quick coupling,needle point, 145 mm, 2 ea.
03.010.106 Direct Measuring Device, for Locking Screwsto 100 mm for IM Nails
03.010.107 StarDrive Screwdriver, T25, self-retaining03.010.108 StarDrive Screwdriver, T25, self-retaining,
long03.010.110 Cannulated StarDrive Screwdriver, T40,
self-retaining03.010.111 Cannulated StarDrive Screwdriver, T40,
with lever handle, self-retaining03.010.112 Holding Sleeve, with Locking Device03.010.226 Insertion Handle for Adolescent Lateral Entry
Femoral Nail–EX03.010.227 Aiming Arm for Adolescent Lateral Entry
Femoral Nail–EX03.010.228 Drill bit for 5.0 mm Recon Screws, large,
quick coupling, 2 ea.03.010.229 13 mm Protection Sleeve, short321.17 4.5 mm Pin Wrench, 120 mm, 2 ea.321.20 Ratchet Wrench, 11 mm width across flats351.27 13.0 mm Cannulated Drill Bit, 300 mm357.133 Extraction Screw, for Titanium Femoral and
Tibial Nails357.22 Hammer Guide, for use with Slide Hammer
(357.25)357.393 3.2 mm Trocar, 172 mm357.398 Cannulated Shaft with 8 mm hex125 mm357.399 3.2 mm Guide Wire, 400 mm, 10 ea.360.251 7.5 mm Intramedullary Reduction Tool, 460 mm393.105 Small Universal Chuck with T-Handle
Also available: Adolescent Lateral Entry Femoral Nail–EX Implant Set (01.031.002)Titanium Cannulated Adolescent Lateral Entry Femoral Nails–EX, 8.2 mm diameter,
240 mm–400 mm lengths, sterile (04.031.924S–04.031.941S)5.0 mm Titanium Recon Screws, 50 mm–125 mm (04.031.020–04.031.035)4.0 mm Titanium Locking Screws, 18 mm–80 mm (04.005.400–04.005.470)
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-14IM Nai
lsAdolescent Lateral Entry Femoral Nail–EX Implant Set
01.031.002 Adolescent Lateral Entry Femoral Nail–EX Implant Set
60.031.002.30 Screw Rack for Adolescent LFN–EX Implants
Instrument319.97 Screw Forceps
Implants04.005.408– 4.0 mm Titanium Locking Screws, with T25 StarDrive recess,04.005.470 2 ea: 18 mm–80 mm (2 mm increments)04.031.000– Titanium End Caps with T40 StarDrive, for Adolescent Lateral Entry04.031.003 Femoral Nail–EX, 2 ea: 0 mm, 5 mm, 10 mm, and 15 mm extensions04.031.020– 5.0 mm Titanium Recon Screws with T25 StarDrive recess,04.031.035 4 ea: 50 mm–125 mm (5 mm increments)
Illustrations not actual size
5/11
R
2-15IM
Nails
Lateral Entry Femoral Recon Nail–EX Instrument Set
01.003.300 Lateral Entry Femoral Recon Nail–EX Instrument Set
69.003.300 Titanium Lateral Entry Femoral Recon Nail–EX Instrument Set Graphic Case
Instruments03.010.020 Radiographic Ruler, for Titanium Cannulated
Femoral Nails03.010.023 Radiographic Canal Width Estimator, for IM Nails03.010.024 Holding Device, for Guide Wires and
Reaming Rods03.010.028 15.0 mm Cannulated Drill Bit, large quick
coupling, 280 mm03.010.029 17.0 mm Cannulated Drill Bit, large quick
coupling, 280 mm03.010.041 14.0 mm Cannulated Awl03.010.044 Cannulated Connecting Screw, for Standard
Insertion Handle, 2 ea.03.010.045 Standard Insertion Handle03.010.047 Driving Cap with Handle Adapter03.010.048 Recon Locking Aiming Arm, for Lateral Entry
Femoral Nail–Recon EX03.010.056 Slide/Fixed Hammer, 700 Grams03.010.061 4.2 mm Three-Fluted Drill Bit, quick coupling,
330 mm, 100 mm calibration, 2 ea.03.010.062 5.0 mm Three-Fluted Drill Bit, quick coupling,
330 mm, 100 mm calibration, 2 ea.03.010.063 12.0 mm/8.0 mm Protection Sleeve, 188 mm03.010.065 8.0 mm/4.2 mm Drill Sleeve, 200 mm03.010.066 8.0 mm/5.0 mm Drill Sleeve, 200 mm03.010.070 4.2 mm Trocar, 210 mm03.010.071 5.0 mm Trocar, 210 mm03.010.072 Depth Gauge for Locking Screws, to 100 mm,
for IM Nails03.010.075 11.5 mm/8.5 mm Protection Sleeve, for Recon
Locking, 2 ea.03.010.076 8.5 mm/3.2 mm Wire Guide, for Recon Locking,
2 ea.
03.010.077 3.2 mm Trocar, for Recon Locking, 2 ea.03.010.078 4.5 mm/6.5 mm Stepped Drill Bit, large, quick
coupling, 485 mm03.010.080 Tap for 6.5 mm Recon Screws03.010.085 Specialty Locking Measuring Device, for
Titanium Femoral Nails–EX03.010.092 Ball Hex Screwdriver, 8 mm03.010.093 Reaming Rod Push Rod, with ball handle03.010.101 4.2 mm Three-Fluted Drill Bit, quick coupling,
145 mm, 2 ea.03.010.102 5.0 mm Three-Fluted Drill Bit, quick coupling,
145 mm, 2 ea.03.010.104 4.2 mm Three-Fluted Drill Bit, quick coupling,
needle point, 145 mm, 2 ea.03.010.105 5.0 mm Three-Fluted Drill Bit, quick coupling,
needle point, 145 mm, 2 ea.03.010.106 Direct Measuring Device for Locking Screws, to
100 mm, for IM Nails03.010.108 StarDrive Screwdriver, T25, self-retaining, Long03.010.109 StarDrive Screwdriver Shaft, T25, self-retaining,
quick coupling, 280 mm03.010.110 Cannulated StarDrive Screwdriver, T40, self-
retaining03.010.111 Cannulated StarDrive Screwdriver, T40, with
lever handle, self-retaining03.010.112 Holding Sleeve, with Locking Device 03.010.150 Star/HexDrive Screwdriver, T25, 3.5 mm hex,
self-retaining03.010.151 Star/HexDrive Screwdriver Shaft, T25, 3.5 mm
hex, self-retaining, 165 mm03.010.152 Star/HexDrive Screwdriver Shaft, T25, 3.5 mm
hex, self-retaining, 280 mm
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-16IM Nai
lsLateral Entry Femoral Recon Nail–EX Instrument Set
01.003.300 Lateral Entry Femoral Recon Nail–EX Instrument Set— continued
Instruments continued
321.17 4.5 mm Pin Wrench, 120 mm 321.20 Ratchet Wrench, 11 mm width across flats357.133 Extraction Screw, for Titanium Femoral and Tibial Nails357.22 Hammer Guide, for Slide Hammer (357.25)357.392 17.0 mm/3.2 mm Wire Guide, 161 mm357.393 3.2 mm Trocar, 172 mm357.398 Cannulated Shaft with 8 mm hex, 125 mm357.399 3.2 mm Guide Wire, 400 mm, 3 ea.357.410 22.0 mm/17.0 mm Protection Sleeve360.243 Handle, for 12.0 mm Tapered Intramedullary Reduction Tool360.244 Shaft, for 12.0 mm Tapered Intramedullary Reduction Tool360.251 7.5 mm Intramedullary Reduction Tool, 460 mm393.105 Small Universal Chuck with T-Handle
Also available: Titanium Cannulated Lateral Entry Femoral Recon Nails–EX, 9 mm–16 mm diameters, 300 mm–480 mm lengths, sterile (04.003.420S–04.003.977S)
5.0 mm Titanium Locking Screws with T25 StarDrive recess,26 mm–100 mm (04.005.516–04.005.590)
6.0 mm Titanium Locking Screws with T25 StarDrive recess26 mm–125 mm (04.005.616–04.005.695)
6.5 mm Titanium Recon Screws with T25 StarDrive recess60 mm–95 mm (04.003.022–04.003.036)
Illustrations not actual size
5/11
R
2-17IM
Nails
Lateral Entry Femoral Recon Nail–EX Implant Set
01.003.006 Lateral Entry Femoral Recon Nail–EX Implant Set
690.502 Locking Screw/Spiral Blade Rack for Femoral Nail–EX Implants
Instrument319.97 Screw Forceps
Implants04.005.516– 5.0 mm Titanium Locking Screws with T25 StarDrive recess, for IM Nails04.005.590 2 ea.: 26 mm–80 mm (2 mm increments), 85 mm–100 mm (5 mm increments)
04.005.616– 6.0 mm Titanium Locking Screws with T25 StarDrive recess, for IM Nails04.005.690 2 ea.: 26 mm–80 mm (2 mm increments), 85 mm–100 mm (5 mm increments)
04.003.022– 6.5 mm Titanium Recon Screws with T25 StarDrive recess, for IM Nails04.003.029 2 ea.: 60 mm–95 mm (5 mm increments)
04.003.000 Titanium End Cap, with T40 StarDrive, 0 mm extension, 2 ea.
04.003.001– 12 mm Titanium End Caps, with T40 StarDrive04.003.004 2 ea.: 5 mm, 10 mm, 15 mm and 20 mm extension
04.003.006– 16 mm Titanium End Caps, with T40 StarDrive04.003.009 2 ea.: 5 mm, 10 mm, 15 mm and 20 mm extension
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-18IM Nai
lsLateral Entry Femoral Nail–EX Instrument Set
01.030.003 Lateral Entry Femoral Nail–EX Instrument Set
Instruments03.010.020 Radiographic Ruler for Titanium Cannulated
Femoral Nails03.010.023 Radiographic Canal Width Estimator for IM Nails03.010.024 Holding Device for Guide Wires and Reaming Rods03.010.028 15.0 mm Cannulated Drill Bit, large quick
coupling, 280 mm03.010.029 17.0 mm Cannulated Drill Bit, large quick
coupling, 280 mm03.010.041 14.0 mm Cannulated Awl03.010.044 Cannulated Connecting Screw for Standard
Insertion Handle, 2 ea.03.010.045 Standard Insertion Handle03.010.047 Driving Cap with Handle Adapter03.010.056 Slide/Fixed Hammer, 700 Grams03.010.061 4.2 mm Three-Fluted Drill Bit, quick coupling,
330 mm, 100 mm calibration, 2 ea.03.010.062 5.0 mm Three-Fluted Drill Bit, quick coupling,
330 mm, 100 mm calibration, 2 ea.
03.010.063 12.0 mm/8.0 mm Protection Sleeve, 188 mm03.010.065 8.0 mm/4.2 mm Drill Sleeve, 200 mm03.010.066 8.0 mm/5.0 mm Drill Sleeve, 200 mm03.010.070 4.2 mm Trocar, 210 mm03.010.071 5.0 mm Trocar, 210 mm03.010.072 Depth Gauge for Locking Screws, to 100 mm,
for IM Nails03.010.092 Ball Hex Screwdriver, 8 mm03.010.093 Reaming Rod Push Rod with Ball Handle
Three-Fluted Drill Bits, quick coupling, 145 mm, 2 ea.
03.010.101 4.2 mm, for Radiolucent Drive03.010.102 5.0 mm, for Radiolucent Drive
Also available: Flexible Reamer Set for IM Nails (150.060)Lateral Entry Femoral Nail–EX Implant Set (01.030.002)Titanium Cannulated Lateral Entry Femoral Nails–EX, 9 mm–16 mm diameters,
300 mm–480 mm lengths, sterile (04.030.930S–04.030.649S)5.0 mm Titanium Locking Screws with T25 StarDrive recess, 26 mm–100 mm (04.005.516–04.005.590)6.0 mm Titanium Locking Screws with T25 StarDrive recess, 26 mm–125 mm (04.005.616–04.005.695)
03.010.104 4.2 mm, needle point03.010.105 5.0 mm, needle point03.010.106 Direct Measuring Device for Locking Screws,
to 100 mm, for IM Nails03.010.109 StarDrive Screwdriver Shaft, T25, Self-Retaining,
quick coupling, 280 mm03.010.110 Cannulated StarDrive Screwdriver, T40,
self-retaining03.010.111 Cannulated StarDrive Screwdriver, T40, with
lever handle, self-retaining03.010.112 Holding Sleeve with Locking Device03.010.127 Aiming Arm for Lateral Entry Femoral Nail-EX03.010.150 Star/HexDrive Screwdriver, T25, 3.5 mm hex,
self-retaining314.119 StarDrive Screwdriver Shaft, T25, self-retaining,
165 mm321.17 4.5 mm Pin Wrench, 120 mm321.20 Ratchet Wrench, 11 mm width across flats357.133 Extraction Screw for Titanium Femoral and
Tibial Nails357.22 Hammer Guide for Slide Hammer357.392 17.0 mm/3.2 mm Wire Guide, 161 mm357.393 3.2 mm Trocar, 172 mm357.398 Cannulated Shaft with 8 mm Hex, 125 mm357.399 3.2 mm Guide Wire, 400 mm, 3 ea.357.410 22.0 mm/17.0 mm Protection Sleeve360.243 Handle for 12.0 mm Tapered Intramedullary
Reduction Tool360.244 Shaft for 12.0 mm Tapered Intramedullary
Reduction Tool360.251 7.5 mm Intramedullary Reduction Tool, 460 mm393.105 Small Universal Chuck with T-Handle
60.030.003 Titanium Lateral Entry Femoral Nail–EX Instrument Set Graphic Case
Illustrations not actual size
5/11
R
2-19IM
Nails
Lateral Entry Femoral Nail–EX Implant Set
01.030.002 Lateral Entry Femoral Nail–EX Implant Set
690.502 Locking Screw/Spiral Blade Rack, for Femoral Nail-EX Implants
Implants04.003.000 Titanium End Cap, with T40 StarDrive recess, 0 mm extension, 2 ea.04.003.001– 12 mm Titanium End Caps, with T40 StarDrive recess04.003.004 2 ea.: 5 mm, 10 mm, 15 and 20 mm extension04.003.006– 16 mm Titanium End Caps, with T40 StarDrive recess04.003.009 2 ea.: 5 mm, 10 mm, 15 and 20 mm extension04.005.516– 5.0 mm Titanium Locking Screws, with T25 StarDrive recess, for IM Nails04.005.590 2 ea.: 26 mm–80 mm (2 mm increments)
2 ea.: 85 mm–100 mm (5 mm increments)04.005.616– 6.0 mm Titanium Locking Screws, with T25 StarDrive recess, for IM Nails04.005.690 2 ea.: 26 mm–60 mm (2 mm increments)
2 ea.: 64 mm–80 mm (4 mm increments)2 ea.: 85 mm–100 mm (5 mm increments)
Also available: Lateral Entry Femoral Nails-EX, 9 mm–16 mm diameters, 300 mm–480 mm lengths, sterile (04.030.xxxS)
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-20IM Nai
lsTitanium Femoral Nail Standard Insertion and Locking Set
304.500 Titanium Femoral Nail Standard Insertion and Locking Set Graphic Case
Instruments314.11 Holding Sleeve314.75 Hexagonal Screwdriver315.40 4.0 mm Three-Fluted Drill Bit, quick coupling,
195 mm, 2 ea.321.20 Ratchet Wrench, 11 mm width across flats321.21 Hexagonal Socket, 11 mm width across flats321.25 Spanner Wrench338.49 Large Quick Coupling 351.05 Tissue Protector351.11 Large Reverse Awl351.27 13.0 mm Cannulated Drill Bit, 300 mm356.98 4.0 mm Three-Fluted Calibrated Drill Bit, quick
coupling, 270 mm, 95 mm calibration, 2 ea.357.18 Driving Cap357.22 Hammer Guide
357.25 Slide Hammer357.36 Extraction Screw357.511 Insertion Handle357.512 Cannulated Connecting Screw357.515 Ball Hexagonal Screwdriver, 8 mm 357.516 Cannulated Shaft, 8 mm Hex357.54 Connecting Screw357.59 Radiographic Ruler357.70 Standard Aiming Arm357.71 8.0 mm/4.0 mm Drill Sleeve357.75 4.0 mm Trocar357.76 11.0 mm/8.0 mm Protection Sleeve357.79 Depth Gauge for Locking Bolts393.10 Universal Chuck with T-Handle399.43 Hammer, 700 grams
Implants in both sets292.69 3.2 mm Calibrated Guide Wire, 300 mm, 5 ea.459.012– 12 mm Titanium End Caps459.014 2 ea.: 0, 10 and 20 mm extension
Also available: Titanium Femoral Nail Standard Insertion and Locking Set, sterile (105.655S)Titanium Femoral Nail Specialty Locking Set (105.68)Combined Femoral Nail Insertion and Locking Set (115.540)4.0 mm/5.0 mm Titanium Locking Screw Set for IM Nails (145.175) in Graphic Case (305.579)Titanium Solid Femoral Nails, 8 mm–10 mm diameters (464.xxx–467.xxx)Titanium Cannulated Femoral Nails, 10 mm–13 mm diameters (474.xxx)Titanium Locking Sleeve and 15 mm Titanium End Caps (474.900) and (474.920–474.922)
Implants in Set 105.655459.26– 4.9 mm Titanium Locking Bolts459.100 2 ea.: 26 mm–100 mm
105.655 Titanium Femoral Nail Standard Insertion and Locking Set, with locking bolts105.657 Titanium Femoral Nail Standard Insertion and Locking Set, with locking screws
Implants in Set 105.657458.926– 5.0 mm Titanium Locking Screws,458.999 2 ea.: 26 mm–100 mm
Illustrations not actual size
5/11
R
2-21IM
Nails
Titanium Femoral Nail System Specialty Locking Set
105.68 Titanium Femoral Nail System Specialty Locking Set
304.520 Titanium Femoral Nail System Specialty Locking Set Graphic Case and Modular Trays
Instruments for Miss-A-Nail310.63 5.0 mm Cannulated Drill Bit, 2 ea.312.05 12.0 mm/8.5 mm Protection Sleeve312.08 8.5 mm/2.8 mm Wire Sleeve314.05 Cannulated Hexagonal Screwdriver319.70 Cannulated Screw Measuring Device357.90 5.6 mm/2.8 mm Wire Sleeve, 2 ea.357.91 2.8 mm Trocar, 2 ea.357.92 Miss-A-Nail Aiming Jig357.97 Dummy Nail
Implants for Miss-A-Nail292.68 2.8 mm Threaded Guide Wire, 300 mm, 5 ea.408.870– 7.3 mm Titanium Cannulated Screws, 408.925 16 mm thread
2 ea.: 70, 75, 80, 85, 90, 95, 100, 105,110, 115, 120 and 125 mm
419.99 Titanium Washer, 13.0 mm, 6 ea.
Instruments for Spiral Blade351.23 13.0 mm/3.2 mm Trocar351.28 15.5 mm/13.0 mm Protection Sleeve351.89 Broach357.31 Inserter for Titanium Spiral Blade357.34 Connecting Screw for Titanium Spiral Blade357.80 Specialty Aiming Arm357.82 8.0 mm/3.2 mm Wire Sleeve357.96 3.2 mm Trocar
Implants for Spiral Blade456.010– Titanium Locking Sleeves for Spiral Blade456.012 2 ea.: 100°, 110° and 120°456.70– Titanium Spiral Blades456.120 1 ea.: 70, 75, 80, 85, 90, 95, 100,
105, 110, 115 and 120 mm457.010– 15 mm Titanium End Caps for Spiral Blade 457.012 2 ea: 0 mm, 10 mm and 20 mm extension
Implants for 130° Antegrade Locking456.013 130° Titanium Locking Sleeve, 2 ea.457.210– 15 mm Titanium End Caps for 130° Locking Sleeve 457.212 2 ea.: 0 mm, 10 mm and 20 mm extension
Also available: Titanium Femoral Nail Specialty Locking Set (105.68S), sterileTitanium Femoral Nail Standard Insertion and Locking Set (105.655)Combined Femoral Nail Insertion and Locking Set (115.540)Titanium Locking Sleeves (474.910–474.913)7.3 mm Titanium Cannulated Screws (408.8xx and 408.9xx)5.0 mm Titanium Shaft Screws (457.070–457.125)
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-22IM Nai
lsCombined Femoral Nail Insertion and Locking Set
115.540 Combined Femoral Nail Insertion and Locking Set
Instruments292.69 3.2 mm Calibrated Guide Wire, 5 ea.314.11 Holding Sleeve314.75 Hexagonal Screwdriver315.40 4.0 mm Three-Fluted Drill Bit, quick coupling,
195 mm, 2 ea.321.20 Ratchet Wrench, 11 mm width across flats321.21 Hexagonal Socket, 11 mm width across flats321.25 Spanner Wrench351.05 Tissue Protector351.11 Large Reverse Awl351.23 13.0 mm/3.2 mm Trocar351.27 13 mm Cannulated Drill Bit, 300 mm351.28 15.5 mm/13 mm Protection Sleeve351.89 Broach for Titanium Femoral Nails356.98 4.0 mm Three-Fluted Drill Bit, quick coupling,
270 mm, 95 mm calibration, 2 ea.357.095 Connecting Screw, for Distal Femoral Nail357.096 Aiming Arm, for 6.0 mm locking screws357.097 8.0 mm/5.0 mm Drill Sleeve357.098 5.0 mm Trocar357.099 5.0 mm Three-Fluted Drill Bit, quick coupling,
330 mm, 100 mm calibration, 2 ea.357.111 Radiographic Ruler for Distal Femoral Nail357.112 Insertion Handle for Titanium Distal Femoral Nails357.113 Locking Bolt Measuring Device
357.127 13 mm Protection Sleeve for Distal Femoral Nail357.128 13 mm/3.2 mm Trocar for Distal Femoral Nail357.18 Driving Cap for Titanium Femoral Nails357.22 Hammer Guide357.25 Slide Hammer357.31 Inserter for Titanium Spiral Blades357.34 Connecting Screw for Titanium Spiral Blades357.36 Extraction Screw for Titanium Femoral Nails357.511 Insertion Handle for Titanium Femoral Nails357.512 Cannulated Connecting Screw for Titanium
Femoral Nails, 2 ea.357.515 Ball Hex Screwdriver, 8 mm hex357.516 Cannulated Shaft, 8 mm hex357.59 Radiographic Ruler for Titanium Femoral Nails357.70 Standard Aiming Arm for Titanium Femoral Nails357.71 8.0 mm/4.0 mm Drill Sleeve357.75 4.0 mm Trocar357.76 11.0 mm/8.0 mm Protection Sleeve357.80 Specialty Aiming Arm357.82 8.0 mm/3.2 mm Wire Sleeve357.96 3.2 mm Trocar, for use with 357.82393.10 Universal Chuck with T-Handle360.253 Holding Sleeve Locking Device360.255 Reaming Rod Measuring Device
690.313 Combined Femoral Nail Insertion and Locking Set Graphic Case
Also available: 4.0 mm/5.0 mm Titanium Locking Screw Set for IM Nails (145.175) in Graphic Case (305.579)Titanium Distal Femoral Nails, 9 mm–13 mm diameters, 160 mm–460 mm lengths (450.701–450.853)Titanium Solid Femoral Nails, 8 mm–10 mm diameters (464.xxx–467.xxx)Titanium Cannulated Femoral Nails, 10 mm–13 mm diameters (474.xxx)
Illustrations not actual size
5/11
R
2-23IM
Nails
Retrograde/Antegrade Femoral Nail–EX Instrument and Titanium Implant Set
01.013.300 Retrograde/Antegrade Femoral Nail–EX Instrument and Titanium Implant Set
69.013.300 Retrograde/Antegrade Femoral Nail-EX Instrument Set Graphic Case690.502 Locking Screw/Spiral Blade Rack
Instruments321.17 4.5 mm Pin Wrench, 120 mm, 2 ea.321.20 Ratchet Wrench, 11 mm width across flats351.05 Tissue Protector351.27 13.0 mm Cannulated Drill Bit, 300 mm357.127 13.0 mm Protection Sleeve (for retrograde insertion)357.128 13.0 mm/3.2 mm Trocar (for retrograde insertion)357.133 Extraction Screw, for Titanium Femoral and Tibial Nails357.22 Hammer Guide, for Slide Hammer357.34 Connecting Screw, for Spiral Blade Inserter357.36 Extraction Screw (for spiral blades)357.398 Cannulated Shaft with 8 mm hex, 125 mm03.010.020 Radiographic Ruler, for Titanium Cannulated Femoral Nails03.010.023 Radiographic Canal Width Estimator, for IM Nails03.010.024 Holding Device for Guide Wires and Reaming Rods03.010.030 13.0 mm Protection Sleeve (for antegrade insertion)03.010.031 13.0 mm/3.2 mm Wire Guide, with trocar tip (for antegrade insertion)03.010.034 13.0 mm Flexible Cannulated Drill Bit, large quick coupling, 465 mm03.010.041 14.0 mm Cannulated Awl03.010.044 Cannulated Connecting Screw, for Standard Insertion Handle, 2 ea.03.010.045 Standard Insertion Handle03.010.047 Driving Cap with Handle Adapter
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-24IM Nai
lsRetrograde/Antegrade Femoral Nail–EX Instrument and Titanium Implant Set
01.013.300 Retrograde/Antegrade Femoral Nail–EX Instrument and Titanium Implant Set— continued
03.010.049 Aiming Arm, for Antegrade Standard Locking03.010.050 Aiming Arm, for Retrograde Standard Locking03.010.051 Aiming Arm, for Retrograde Spiral Blade Locking03.010.056 Slide/Fixed Hammer, 700 grams03.010.061 4.2 mm Three-Fluted Drill Bit, quick coupling, 330 mm, 100 mm calibration, 2 ea.03.010.062 5.0 mm Three-Fluted Drill Bit, quick coupling, 330 mm, 100 mm calibration, 2 ea.03.010.063 12.0 mm/8.0 mm Protection Sleeve, 188 mm03.010.065 8.0 mm/4.2 mm Drill Sleeve, 200 mm03.010.066 8.0 mm/5.0 mm Drill Sleeve, 200 mm03.010.070 4.2 mm Trocar, 210 mm03.010.071 5.0 mm Trocar, 210 mm03.010.072 Depth Gauge, for locking screws to 100 mm, for IM nails03.010.081 15.0 mm/13.0 mm Protection Sleeve, for spiral blade aiming arm03.010.082 13.0 mm/3.2 mm Wire Guide, for spiral blade aiming arm03.010.083 Spiral Blade Measuring Device, for Retrograde Femoral Nails-EX03.010.084 Spiral Blade Inserter, for Retrograde Femoral Nails-EX03.010.092 Ball Hex Screwdriver, 8 mm03.010.093 Reaming Rod Push Rod, with Ball Handle03.010.104 4.2 mm Three-Fluted Drill Bit, quick coupling, 145 mm, 2 ea.03.010.105 5.0 mm Three-Fluted Drill Bit, quick coupling, 145 mm, 2 ea.03.010.106 Direct Measuring Device, for locking screws to 100 mm, for IM nails03.010.107 StarDrive Screwdriver, T25, self-retaining03.010.110 Cannulated StarDrive Screwdriver, T40, self-retaining03.010.112 Holding Sleeve, with Locking Device03.010.115 3.2 mm Guide Wire, 290 mm, 3 ea.
Implants04.003.000 Titanium End Cap for Femoral Nail-EX, 0 mm extension, standard locking, 2 ea.04.003.001– 12 mm Titanium End Caps for Femoral Nail-EX04.003.004 2 ea.: 5 mm–20 mm extension (5 mm increments)04.013.000 Titanium End Cap, for Retrograde Femoral Nail-EX Spiral Blade Locking, 2 ea.04.013.041– Titanium Spiral Blades, for Retrograde Femoral Nails-EX04.013.052 1 ea.: 45 mm–100 mm (5 mm increments)04.005.516– 5.0 mm Titanium Locking Screws, with T25 StarDrive recess, for IM Nails04.005.590 2 ea.: 26 mm–80 mm (2 mm increments) and 85 mm–100 mm (5 mm increments)04.005.616– 6.0 mm Titanium Locking Screws, with T25 StarDrive recess, for IM Nails04.005.690 2 ea.: 26 mm–60 mm (2 mm increments), 64 mm–80 mm (4 mm increments)
and 85 mm–100 mm (5 mm increments)
Also available: Retrograde/Antegrade Femoral Nail–EX Instrument Set (01.013.303)Retrograde/Antegrade Femoral Nail–EX Titanium Implant Set (01.013.304)Titanium Cannulated Retrograde/Antegrade Femoral Nails-EX, 9 mm–15 mm dia.,
160 mm–480 mm lengths, sterile (04.013.312S–04.013.976S)
Illustrations not actual size
5/11
R
2-25IM
Nails
Titanium Distal Femoral Nail Insertion and Locking Set105.521 Titanium Distal Femoral Nail Insertion and Locking Set, with locking bolts105.523 Titanium Distal Femoral Nail Insertion and Locking Set, with locking screws
304.545 Titanium Distal Femoral Nail Insert and Locking Set Graphic Case
Instruments314.75 Hexagonal Screwdriver315.40 4.0 mm Three-Fluted Drill Bit, quick coupling,
195 mm, 2 ea.321.25 Spanner Wrench351.11 Large Reverse Awl351.27 13.0 mm Cannulated Drill Bit, 300 mm357.095 Connecting Screw357.096 Aiming Arm for 6.0 mm Titanium Locking Screws357.097 8.0 mm/5.0 mm Drill Sleeve357.098 5.0 mm Trocar
357.099 5.0 mm Three-Fluted Drill Bit, quick coupling330 mm, 100 mm calibration, 2 ea.
357.111 Radiographic Ruler357.112 Insertion Handle357.113 Locking Bolt Measuring Device357.127 13.0 mm Protection Sleeve357.128 13.0 mm/3.2 mm Trocar357.22 Hammer Guide357.25 Slide Hammer357.76 11.0 mm/8.0 mm Protection Sleeve
Implants in both sets292.69 3.2 mm Calibrated Guide Wire, 300 mm, 5 ea.450.861– 6.0 mm Titanium Locking Screws450.875 2 ea.: 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95 and 100 mm450.896 Titanium End Cap, 2 ea.
Implants in Set 105.521459.26– 4.9 mm Titanium Locking Bolts459.60 2 ea.: 26, 28, 30, 32, 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58 and 60 mm
Implants in Set 105.523458.926– 5.0 mm Titanium Locking Screws,458.999 2 ea.: 26 mm–100 mm
Also available: 4.0 mm/5.0 mm Titanium Locking Screw Set for IM Nails (145.175) in Graphic Case (305.579)Titanium Solid Distal Femoral Nails, 9 mm diameter (450.701–450.716)Titanium Cannulated Distal Femoral Nails, 10 mm–13 mm diameters (450.781–450.856)
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-26IM Nai
lsHindfoot Arthrodesis Nail–EX Instrument Set
01.008.003 Hindfoot Arthrodesis Nail–EX Instrument Set
690.540 Graphic Case for Hindfoot Arthrodesis Nail–EX
Instruments03.008.001 Radiographic Ruler, for Titanium Cannulated
Hindfoot Arthrodesis Nail–EX03.008.002 18.0 mm/ 8.0 mm Protection Sleeve, 188 mm03.008.004 Threaded Alignment Pin, for Hindfoot
Arthrodesis Nail–EX, 2 ea.03.008.005 Driving Cap, for Hindfoot Arthrodesis Nail–EX03.008.007 Insertion Handle, for Hindfoot Arthrodesis
Nail–EX03.008.008 5.0 mm Three-Fluted Drill Bit, quick coupling,
356 mm, 126 mm calibration, 2 ea.03.008.009 Aiming Arm for Titanium Cannulated
Hindfoot Arthrodesis Nail–EX03.008.010 Aiming Arm Adapter for Titanium
Cannulated Hindfoot Arthrodesis Nail–EX03.008.011 Spiral Blade Inserter for Hindfoot Arthrodesis
Nail–EX03.010.024 Holding Device, for Guide Wires and Reaming
Rods03.010.056 Slide/Fixed Hammer, 700 grams03.010.061 4.2 mm Three-Fluted Drill Bit, quick coupling,
330 mm, 100 mm calibration, 2 ea.03.010.063 12.0 mm/8.0 mm Protection Sleeve, 188 mm03.010.064 8.0 mm/3.2 mm Drill Sleeve, 200 mm03.010.065 8.0 mm/4.2 mm Drill Sleeve, 200 mm03.010.066 8.0 mm/5.0 mm Drill Sleeve, 200 mm03.010.069 3.2 mm Trocar03.010.070 4.2 mm Trocar, 210 mm03.010.071 5.0 mm Trocar, 210 mm03.010.072 Depth Gauge, for Locking Screws to 100 mm
for IM Nails
03.010.081 15.0 mm/13.0 mm Protection Sleeve, forSpiral Blade Aiming Arm (03.010.051)
03.010.082 13.0 mm/3.2 mm Wire Guide, for Spiral BladeAiming Arm (03.010.051)
03.010.083 Spiral Blade Measuring Device, for RetrogradeFemoral Nail–EX
03.010.092 Ball Hex Screwdriver 8 mm03.010.093 Reaming Rod Push Rod, with Ball Handle03.010.108 StarDrive Screwdriver, T25, self-retaining, long03.010.109 StarDrive Screwdriver Shaft, T25, self-
retaining, quick coupling, 280 mm03.010.112 Holding Sleeve, with Locking Device03.010.115 3.2 mm Guide Wire, 290 mm, 5 ea.03.010.146 Cannulated Connecting Screw, with Internal
Thread for Percutaneous Insertion Handle, 2 ea.
321.17 4.5 mm Pin Wrench, 120 mm321.20 Ratchet Wrench, 11 mm width across flats351.27 13.0 mm Cannulated Drill Bit, 300 mm357.127 13.0 mm Protection Sleeve357.128 13.0 mm/3.2 mm Trocar357.22 Hammer Guide, for use with Slide Hammer
(357.25)357.34 Connecting Screw, for Titanium Spiral Blades,
for use with Titanium Spiral Blade Inserter(357.31)
357.36 Extraction Screw, for use with TitaniumUnreamed Femoral Nails and Titanium SpiralBlades
357.398 Cannulated Shaft with 8 mm hex, 125 mm357.399 3.2 mm Guide Wire, 400 mm, 5 ea.
Also available: Hindfoot Arthrodesis Nail–EX Implant Set (01.008.004)Titanium Cannulated Hindfoot Arthrodesis Nails–EX, 10 mm–13 mm diameters, 150 mm–240 mm lengths, sterile (04.008.010S–04.008.378S) 5.0 mm Titanium Locking Screws, with T25 StarDrive recess, 26 mm–100 mm (04.005.516–04.005.590) 6.0 mm Titanium Locking Screws with T25 StarDrive recess, 48 mm–125 mm (04.005.638–04.005.695)
Illustrations not actual size
5/11
R
2-27IM
Nails
Hindfoot Arthrodesis Nail–EX Implant Set
01.008.004 Hindfoot Arthrodesis Nail–EX Implant Set
690.502 Locking Screw/Spiral Blade Rack, for Femoral Nail–EX Implants
Implants04.005.516– 5.0 mm Titanium Locking Screws, with T25 StarDrive recess, for IM Nails04.005.590 2 ea.: 26 mm–80 mm (2 mm increments), 85 mm–100 mm (5 mm increments)
04.005.638– 6.0 mm Titanium Locking Screws with T25 StarDrive recess, for IM Nails04.005.695 2 ea.: 48 mm–80 mm (2 mm increments), 85 mm–125 mm (5 mm increments)
04.008.000 Titanium End Cap T25 StarDrive Hindfoot Arthrodesis Nail–EX Spiral Blade, 2 ea.04.008.001 Titanium End Cap T25 StarDrive Hindfoot Arthrodesis Nail–EX, 2 ea.
04.013.041– Titanium Spiral Blades, for Retrograde Femoral Nails–EX04.013.052 45 mm–100 mm (5 mm increments)
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-28IM Nai
lsReamer/Irrigator/Aspirator Instrument Set
105.309 Reamer/Irrigator/Aspirator Instrument Set
690.308 Reamer/Irrigator/Aspirator Instrument Set Graphic Case
Instruments314.742 Drive Shaft for RIA, minimum 360 mm length314.743 Drive Shaft for RIA, minimun 520 mm length, 2 ea.351.05 Tissue Protector351.717 Depth Gauge351.719 Depth Gauge Extension Tube393.10 Universal T-Handle Chuck
Also available: RIA Tube Assemblies, sterile (314.745S) and (314.746S)Drive Shaft Seal, sterile (351.718S)2.5 mm Reaming Rods, sterile (351.706S) and (351.707S) Reamer Heads for RIA, sterile (352.250S-352.259S)Medullary Tube (355.006)
Illustrations not actual size
5/11
R
2-29IM
Nails
Flexible Reamer Set
150.060 Flexible Reamer Set, for IM Nails
690.382 Flexible Reamers for IM Nails Instrument Set Graphic Case
Instruments352.040 5.0 mm Flexible Shaft, 2 ea.351.783 Removal Tool352.050 7.0 mm Reduction Head, straight352.055 7.0 mm Reduction Head, angled352.085– Medullary Reamer Heads352.190 1 ea.: 8.5, 9.0, 9.5, 10.0, 10.5, 11.0, 11.5, 12.0, 12.5, 13.0, 13.5, 14.0,
14.5, 15.0, 15.5, 16.0, 16.5, 17.0, 17.5, 18.0, 18.5 and 19.0 mm352.041 3.6 mm Cleaning Brush351.782 Holding Forceps351.717 Depth Gauge351.719 Extension Tube for depth gauge351.15 Flexible Shaft Handle with quick coupling351.05 Tissue Protector351.92 6.0 mm Hand Reamer, 450 mm351.93 7.0 mm Hand Reamer, 450 mm351.94 8.0 mm Hand Reamer, 450 mm393.10 Universal Chuck with T-Handle
Also available: Flexible Medullary Reamers, flat wire (359.106-.359.110)Flexible Shaft Connector (351.16J)2.5 mm Reaming Rods, sterile (351.706S) and (351.707S)Medullary Tube (355.006)
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-30IM Nai
lsAngular Stable Locking Screw Instrument Set
01.025.002 Angular Stable Locking Screw Instrument Set
60.025.002 Graphic Case for Angular Stable Locking System, for Cannulated Titanium Intramedullary Nails
Instruments399.505 Synthetic Hammer
Drill-Reamers, quick coupling, 145 mm, 2 ea.03.025.027 2.9 mm/5.0 mm, for 4.0 mm Angular Stable Locking Screws03.025.028 3.9 mm/6.0 mm, for 5.0 mm Angular Stable Locking Screws03.025.029 4.9 mm/7.0 mm, for 6.0 mm Angular Stable Locking Screws
Hand Reamers03.025.030 2.9 mm/5.0 mm, for 4.0 mm Angular Stable Locking Screws03.025.031 3.9 mm/6.0 mm, for 5.0 mm Angular Stable Locking Screws03.025.032 4.9 mm/7.0 mm, for 6.0 mm Angular Stable Locking Screws
03.025.052 Depth Gauge, for Angular Stable Locking System03.025.066 Sleeve Positioner, for 6.0 mm Angular Stable Locking System Sleeves03.025.067 Sleeve Positioner, for 4.0 mm and 5.0 mm Angular Stable Locking System Sleeves
Three-Fluted Drill Bits, quick coupling, needle point, 150 mm, 2 ea.03.025.082 2.9 mm/3.2 mm, for 4.0 mm Angular Stable Locking Screws03.025.083 3.9 mm/4.2 mm, for 5.0 mm Angular Stable Locking Screws03.025.084 4.9 mm/5.0 mm, for 6.0 mm Angular Stable Locking Screws
Three-Fluted Drill Bits, quick coupling, needle point, 331 mm, 100 mm calibration, 2 ea.03.025.104 2.9 mm/3.2 mm, for 4.0 mm Angular Stable Locking Screws03.025.105 3.9 mm/4.2 mm, for 5.0 mm Angular Stable Locking Screws03.025.106 4.9 mm/5.0 mm, for 6.0 mm Angular Stable Locking Screws
Drill-Reamers, quick coupling, 2 ea.03.025.134 2.9 mm/5.0 mm, 268 mm, for 4.0 mm Angular Stable Locking Screws03.025.135 3.9 mm/6.0 mm, 288 mm, for 5.0 mm Angular Stable Locking Screws03.025.136 4.9 mm/7.0 mm, 288 mm, for 6.0 mm Angular Stable Locking Screws
Also available: ASLS Screw Sets in the following configurations:4.0 mm Angular Stable Locking System Screw Set (01.025.008)
with 4.0 mm Titanium Screws with T25 StarDrive recess5.0 mm Angular Stable Locking System Screw Set (01.025.009)
with 5.0 mm Titanium Screws with T25 StarDrive recess6.0 mm Angular Stable Locking System Screw Set (01.025.010)
with 6.0 mm Titanium Screws with T25 StarDrive recessAngular Stable Locking System Screw Set (01.025.001) which includes
both the 4.0 mm and 5.0 mm screw sets (01.025.008 and 01.025.009)
Illustrations not actual size
5/11
R
2-31IM
Nails
4.0 mm/5.0 mm Titanium Locking Screw Set, for IM Nails
145.175 4.0 mm/5.0 mm Titanium Locking Screw Set, for IM Nails
305.579 4.0 mm/5.0 mm Titanium Locking Screw Set Graphic Case
Implants458.818– 4.0 mm Titanium Locking Screws458.880 2 ea.: 18 mm–80 mm (2 mm increments)
458.926– 4.0 mm Titanium Locking Screws458.999 2 ea.: 26 mm–80 mm (2 mm increments), 85 mm–100 mm (5 mm increments)
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-32IM Nai
lsAccessory Instruments for IM Nail Insertion Set
115.545 Accessory Instruments for IM Nail Insertion Set
690.314 Accessory Instruments for IM Nail Insertion Set Graphic Case
Instruments360.243 Handle for 12.0 mm Tapered Intramedullary Reduction Tool360.244 Shaft for 12.0 mm Tapered Intramedullary Reduction Tool360.246 17.5 mm/15.5 mm Protection Sleeve360.248 18.0 mm/3.2 mm Wire Guide360.249 15.5 mm/3.2 mm Wire Guide360.251 7.5 mm Intramedullary Reduction Tool, 460 mm360.253 Holding Sleeve Locking Device360.255 Reaming Rod Measuring Device360.257 13.0 mm Flexible Drill Bit, 385 mm, large quick coupling360.258 15.5 mm Flexible Drill Bit, 385 mm, large quick coupling360.261 21.0 mm/18.0 mm Protection Sleeve360.262 15.5 mm/13.5 mm Protection Sleeve360.265 Handle for Protection Sleeves360.267 13.5 mm/3.2 mm Wire Guide
Illustrations not actual size
5/11
R
2-33IM
Nails
Universal Nail Insertion Instrument Set
115.51 Universal Nail Insertion Instrument Set
305.65 Universal Nail Insertion Instrument Set Graphic Case
Instruments321.16 Combination Wrench, 11 mm width across flats321.17 4.5 mm Pin Wrench, 120 mm351.72 Measuring Gauge, for nail diameter355.04 3.0 mm Guide Rod, 950 mm length, 2 ea.355.06 4.0 mm Guide Rod, 950 mm length, 2 ea.355.14 Cannulated Socket Wrench, 11 mm width across flats355.16 Curved Driving Piece355.18 Driving Head355.22 Ram Guide, 455 mm length355.23 Guide Rod Retainer355.25 Ram355.28 Flexible Grip
Insertion Handles 355.41 For 10 mm–14 mm Universal Tibial Nails355.49 For 10 mm–12 mm Universal Femoral Nails355.50 For 12 mm–16 mm Universal Femoral Nails355.51 For 16 mm–19 mm Universal Femoral Nails
Threaded Conical Bolts 355.44 For 10 mm–14 mm Universal Tibial Nails355.53 For 9 mm–12 mm Universal Femoral Nails355.54 For 13 mm–16 mm Universal Femoral Nails355.55 For 17 mm–19 mm Universal Femoral Nails
Locking Nuts 355.47 For 9 mm–14 mm Universal Tibial Nails355.57 For 9 mm–12 mm Universal Femoral Nails355.58 For 13 mm–16 mm Universal Femoral Nails355.59 For 17 mm–19 mm Universal Femoral Nails
Also available: Universal Nail Locking Instrument and Implant Set (115.53)Universal Tibial Nails (250.xx–254.xx)Universal Femoral Nails (274.xx)
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-34IM Nai
lsUniversal Nail Locking Instrument and Implant Set
115.53 Universal Nail Locking Instrument and Implant Set
305.70 Universal Nail Locking Instrument and Implant Set Graphic Case
Instruments310.02 3.2 mm Drill Bit, quick coupling, 225 mm, 2 ea.310.44 4.5 mm Drill Bit, quick coupling, 145 mm, 2 ea.355.90 4.0 mm/4.5 mm Drill Bit, quick coupling, 225 mm, 2 ea.314.11 Holding Sleeve314.27 Large Hexagonal Screwdriver355.60 Distal Aiming Device355.62 Direction Finder355.64 Aiming Trocar355.66 Femoral Fixation Bolt355.67 Tibial Fixation Bolt355.69 Radiation Shield355.70 11.0 mm/8.0 mm Protection Sleeve355.71 8.0 mm/4.5 mm Drill Sleeve355.73 4.5 mm/3.2 mm Insert Drill Sleeve355.75 8.0 mm Trocar357.79 Depth Gauge
Implants259.26– 4.9 mm Locking Bolts259.100 2 ea.: 26, 28, 30, 32, 34, 36, 38, 40, 42, 44, 46,
48, 50, 52, 54, 56, 58, 60, 64, 68, 72, 76, 80, 85,90, 95 and 100 mm
Also available: Universal Nail Insertion Instrument Set (115.51)
Illustrations not actual size
5/11
R
2-35IM
Nails
Intramedullary Implants
Elastic and Olecranon Nails
Elastic Nails
Stainless Steel Titanium◊ Diameter Length275.915 475.915 1.5 mm 300 mm (purple)275.920 475.920 2.0 440 (green)275.925 475.925 2.5 440 (pink)275.930 475.930 3.0 440 (gold)275.935 475.935 3.5 440 (blue)275.940 475.940 4.0 440 (purple)
◊Available nonsterile or sterile-packed. Add S to catalog number to order sterile product.
02.007.000S Olecranon Osteotomy Nail and Endcap, sterile
2.7 mm Threaded Stepped Screws, for Olecranon Osteotomy Nail, sterile02.007.012S 12 mm02.007.014S 1402.007.016S 1602.007.018S 1802.007.020S 2002.007.022S 2202.007.024S 2402.007.026S 2602.007.028S 2802.007.030S 3002.007.032S 3202.007.034S 3402.007.036S 3602.007.038S 3802.007.040S 4002.007.042S 4202.007.044S 4402.007.046S 4602.007.048S 4802.007.050S 50
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-36IM Nai
lsIntramedullary Implants
Humeral Nails
Titanium Cannulated Proximal Humeral Nails-EX, sterile (blue)
Diameter Length04.001.210S 7.0 mm 150 mm04.001.410S 9.0 15004.001.610S 11.0 150
Titanium Cannulated Humeral Nails-EX, sterile (blue)
Diameter in mmLengthin mm
190 04.001.218S 04.001.418S 04.001.618S200 04.001.220S 04.001.420S 04.001.620S210 04.001.222S 04.001.422S 04.001.622S220 04.001.224S 04.001.424S 04.001.624S230 04.001.226S 04.001.426S 04.001.626S240 04.001.228S 04.001.428S 04.001.628S250 04.001.230S 04.001.430S 04.001.630S260 04.001.232S 04.001.432S 04.001.632S270 04.001.234S 04.001.434S 04.001.634S280 04.001.236S 04.001.436S 04.001.636S290 04.001.238S 04.001.438S 04.001.638S300 04.001.240S 04.001.440S 04.001.640S310 04.001.242S 04.001.442S 04.001.642S320 04.001.244S 04.001.444S 04.001.644S
7.0 9.0 11.0
For Spiral Blades (462.634–462.654), see page 2–54.
Illustrations not actual size
5/11
R
2-37IM
Nails
Intramedullary Implants
Tibial Nails
Titanium Cannulated Tibial Nails-EX, sterile
Diameter in mmLengthin mm
255 04.004.231S 04.004.331S 04.004.431S 04.004.531S 04.004.631S 04.004.731S270 04.004.234S 04.004.334S 04.004.434S 04.004.534S 04.004.634S 04.004.734S285 04.004.237S 04.004.337S 04.004.437S 04.004.537S 04.004.637S 04.004.737S300 04.004.240S 04.004.340S 04.004.440S 04.004.540S 04.004.640S 04.004.740S315 04.004.243S 04.004.343S 04.004.443S 04.004.543S 04.004.643S 04.004.743S330 04.004.246S 04.004.346S 04.004.446S 04.004.546S 04.004.646S 04.004.746S345 04.004.249S 04.004.349S 04.004.449S 04.004.549S 04.004.649S 04.004.749S360 04.004.252S 04.004.352S 04.004.452S 04.004.552S 04.004.652S 04.004.752S375 04.004.255S 04.004.355S 04.004.455S 04.004.555S 04.004.655S 04.004.755S390 04.004.258S 04.004.358S 04.004.458S 04.004.558S 04.004.658S 04.004.758S405 04.004.261S 04.004.361S 04.004.461S 04.004.561S 04.004.661S 04.004.761S420 04.004.264S 04.004.364S 04.004.464S 04.004.564S 04.004.664S 04.004.764S435 04.004.267S 04.004.367S 04.004.467S 04.004.567S 04.004.667S 04.004.767S
8.0 9.0 10.0 11.0 12.0 13.0
blue green
Titanium Cannulated Tibial Nails-EX, with proximal bend, sterile
Diameter in mmLengthin mm
255 04.034.231S 04.034.331S 04.034.431S 04.034.531S 04.034.631S 04.034.731S270 04.034.234S 04.034.334S 04.034.434S 04.034.534S 04.034.634S 04.034.734S285 04.034.237S 04.034.337S 04.034.437S 04.034.537S 04.034.637S 04.034.737S300 04.034.240S 04.034.340S 04.034.440S 04.034.540S 04.034.640S 04.034.740S315 04.034.243S 04.034.343S 04.034.443S 04.034.543S 04.034.643S 04.034.743S330 04.034.246S 04.034.346S 04.034.446S 04.034.546S 04.034.646S 04.034.746S345 04.034.249S 04.034.349S 04.034.449S 04.034.549S 04.034.649S 04.034.749S360 04.034.252S 04.034.352S 04.034.452S 04.034.552S 04.034.652S 04.034.752S375 04.034.255S 04.034.355S 04.034.455S 04.034.555S 04.034.655S 04.034.755S390 04.034.258S 04.034.358S 04.034.458S 04.034.558S 04.034.658S 04.034.758S405 04.034.261S 04.034.361S 04.034.461S 04.034.561S 04.034.661S 04.034.761S420 04.034.264S 04.034.364S 04.034.464S 04.034.564S 04.034.664S 04.034.764S435 04.034.267S 04.034.367S 04.034.467S 04.034.567S 04.034.667S 04.034.767S
8.0 9.0 10.0 11.0 12.0 13.0
blue green
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-38IM Nai
lsIntramedullary Implants
Tibial Nails— continued
Titanium Solid Tibial Nails◊
Diameter in mmLengthin mm 8 (blue) 9 (blue) 10 (green)
255 478.25 479.25 476.25270 478.27 479.27 476.27285 478.28 479.28 476.28300 478.30 479.30 476.30315 478.31 479.31 476.31330 478.33 479.33 476.33345 478.34 479.34 476.34360 478.36 479.36 476.36380 478.38 479.38 476.38400 478.40 479.40 476.40420 478.42 479.42 476.42
Titanium Cannulated Tibial Nails◊ (green)
Diameter in mmLengthin mm 10 11 12 13
255 485.025 485.125 485.225 485.325270 485.027 485.127 485.227 485.327285 485.028 485.128 485.228 485.328300 485.030 485.130 485.230 485.330315 485.031 485.131 485.231 485.331330 485.033 485.133 485.233 485.333345 485.034 485.134 485.234 485.334360 485.036 485.136 485.236 485.336380 485.038 485.138 485.238 485.338400 485.040 485.140 485.240 485.340420 485.042 485.142 485.242 485.342
◊Available nonsterile or sterile-packed. Add S to catalog number to order sterile product.
Illustrations not actual size
5/11
R
2-39IM
Nails
Intramedullary Implants
Tibial Nails— continued
Universal Tibial Nails, sterile
Profile
Proximal Bend: 11° at 33% of length (from proximal end) Fully slotted Proximal Keystone slot Cross Section: Tubular, 1.2 mm wall thickness
Note: 4.9 mm Locking Bolts, 259. series, are used to lock nails, see page 2–53.
Diameter in mmLengthin mm
255 250.25S 251.25S270 250.27S 251.27S
285 250.28S 251.28S300 250.30S 251.30S
315 250.31S 251.31S330 250.33S 251.33S
345 250.34S 251.34S360 250.36S 251.36S
380 250.38S 251.38S400 250.40S 251.40S
420 250.42S 251.42S
10 11
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-40IM Nai
lsIntramedullary Implants
Trochanteric Fixation Nails
Titanium Cannulated Trochanteric Fixation Nails, sterile (green)
Short nails:
Length Neck Distal Diameter in mmin mm Angle 10 11 12
170 125° 456.314S 456.317S 456.321S170 130° 456.315S 456.318S 456.322S170 135° 456.316S 456.319S 456.323S
235 125° 456.324S 456.327S 456.510S235 130° 456.325S 456.328S 456.511S235 135° 456.326S 456.329S 456.512S
Long nails:
Length Neck Angle in mm 125° right 125° left 130° right 130° left 135° right 135° left
10 mm distal diameter
300 456.330S 456.331S 456.350S 456.351S 456.370S 456.371S320 456.332S 456.333S 456.352S 456.353S 456.372S 456.373S340 456.334S 456.335S 456.354S 456.355S 456.374S 456.375S360 456.336S 456.337S 456.356S 456.357S 456.376S 456.377S380 456.338S 456.339S 456.358S 456.359S 456.378S 456.379S400 456.340S 456.341S 456.360S 456.361S 456.380S 456.381S420 456.342S 456.343S 456.362S 456.363S 456.382S 456.383S440 456.344S 456.345S 456.364S 456.365S 456.384S 456.385S460 456.346S 456.347S 456.366S 456.367S 456.386S 456.387S
11 mm distal diameter
300 456.390S 456.391S 456.410S 456.411S 456.430S 456.431S320 456.392S 456.393S 456.412S 456.413S 456.432S 456.433S340 456.394S 456.395S 456.414S 456.415S 456.434S 456.435S360 456.396S 456.397S 456.416S 456.417S 456.436S 456.437S380 456.398S 456.399S 456.418S 456.419S 456.438S 456.439S400 456.400S 456.401S 456.420S 456.421S 456.440S 456.441S420 456.402S 456.403S 456.422S 456.423S 456.442S 456.443S440 456.404S 456.405S 456.424S 456.425S 456.444S 456.445S460 456.406S 456.407S 456.426S 456.427S 456.446S 456.447S
12 mm distal diameter
300 456.450S 456.451S 456.470S 456.471S 456.490S 456.491S320 456.452S 456.453S 456.472S 456.473S 456.492S 456.493S340 456.454S 456.455S 456.474S 456.475S 456.494S 456.495S360 456.456S 456.457S 456.476S 456.477S 456.496S 456.497S380 456.458S 456.459S 456.478S 456.479S 456.498S 456.499S400 456.460S 456.461S 456.480S 456.481S 456.500S 456.501S420 456.462S 456.463S 456.482S 456.483S 456.502S 456.503S440 456.464S 456.465S 456.484S 456.485S 456.504S 456.505S460 456.466S 456.467S 456.486S 456.487S 456.506S 456.507S
Illustrations not actual size
5/11
R
2-41IM
Nails
Intramedullary Implants
Trochanteric Fixation Nails— continued
Long nails:
Length Neck Angle in mm 130° right 130° left
14 mm distal diameter
300 456.630S 456.631S320 456.632S 456.633S340 456.634S 456.635S360 456.636S 456.637S380 456.638S 456.639S400 456.640S 456.641S420 456.642S 456.643S440 456.644S 456.645S460 456.646S 456.647S
Titanium Cannulated Trochanteric Fixation Nails, sterile—continued
8.2 mm Titanium Adolescent Lateral Entry Femoral Nails–EX, sterile (blue)
Length 04.031.924S 240 mm right04.031.925S 240 left04.031.926S 260 right04.031.927S 260 left04.031.928S 280 right04.031.929S 280 left04.031.930S 300 right04.031.931S 300 left04.031.932S 320 right04.031.933S 320 left04.031.934S 340 right04.031.935S 340 left04.031.936S 360 right04.031.937S 360 left04.031.938S 380 right04.031.939S 380 left04.031.940S 400 right04.031.941S 400 left
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-42IM Nai
lsIntramedullary Implants
Recon Nails
Diameter in mm
Lengthin mm
300 04.003.240S 04.003.241S 04.003.340S 04.003.341S 04.003.440S 04.003.441S320 04.003.244S 04.003.245S 04.003.344S 04.003.345S 04.003.444S 04.003.445S340 04.003.248S 04.003.249S 04.003.348S 04.003.349S 04.003.448S 04.003.449S360 04.003.252S 04.003.253S 04.003.352S 04.003.353S 04.003.452S 04.003.453S380 04.003.256S 04.003.257S 04.003.356S 04.003.357S 04.003.456S 04.003.457S400 04.003.260S 04.003.261S 04.003.360S 04.003.361S 04.003.460S 04.003.461S420 04.003.264S 04.003.265S 04.003.364S 04.003.365S 04.003.464S 04.003.465S440 04.003.268S 04.003.269S 04.003.368S 04.003.369S 04.003.468S 04.003.469S460 04.003.272S 04.003.273S 04.003.372S 04.003.373S 04.003.472S 04.003.473S480 04.003.276S 04.003.277S 04.003.376S 04.003.377S 04.003.476S 04.003.477S
green
9 10 11 Right Left Right Left Right Left
Diameter in mm
Lengthin mm
green
12 13 14 Right Left Right Left Right Left
Titanium Cannulated Lateral Entry Femoral Recon Nails-EX, sterile
300 04.003.540S 04.003.541S 04.003.640S 04.003.641S 04.003.740S 04.003.741S320 04.003.544S 04.003.545S 04.003.644S 04.003.645S 04.003.744S 04.003.745S340 04.003.548S 04.003.549S 04.003.648S 04.003.649S 04.003.748S 04.003.749S360 04.003.552S 04.003.553S 04.003.652S 04.003.653S 04.003.752S 04.003.753S380 04.003.556S 04.003.557S 04.003.656S 04.003.657S 04.003.756S 04.003.757S400 04.003.560S 04.003.561S 04.003.660S 04.003.661S 04.003.760S 04.003.761S420 04.003.564S 04.003.565S 04.003.664S 04.003.665S 04.003.764S 04.003.765S440 04.003.568S 04.003.569S 04.003.668S 04.003.669S 04.003.768S 04.003.769S460 04.003.572S 04.003.573S 04.003.672S 04.003.673S 04.003.772S 04.003.773S480 04.003.576S 04.003.577S 04.003.676S 04.003.677S 04.003.776S 04.003.777S
Diameter in mm
Lengthin mm
aqua
15 16 Right Left Right Left
300 04.003.840S 04.003.841S 04.003.940S 04.003.941S320 04.003.844S 04.003.845S 04.003.944S 04.003.945S340 04.003.848S 04.003.849S 04.003.948S 04.003.949S360 04.003.852S 04.003.853S 04.003.952S 04.003.953S380 04.003.856S 04.003.857S 04.003.956S 04.003.957S400 04.003.860S 04.003.861S 04.003.960S 04.003.961S420 04.003.864S 04.003.865S 04.003.964S 04.003.965S440 04.003.868S 04.003.869S 04.003.968S 04.003.969S460 04.003.872S 04.003.873S 04.003.972S 04.003.973S480 04.003.876S 04.003.877S 04.003.976S 04.003.977S
Illustrations not actual size
5/11
R
2-43IM
Nails
Intramedullary Implants
Femoral Nails
Diameter in mm
Lengthin mm
300 04.030.930S 04.030.931S 04.030.030S 04.030.031S 04.030.130S 04.030.131S320 04.030.932S 04.030.933S 04.030.032S 04.030.033S 04.030.132S 04.030.133S340 04.030.934S 04.030.935S 04.030.034S 04.030.035S 04.030.134S 04.030.135S360 04.030.936S 04.030.937S 04.030.036S 04.030.037S 04.030.136S 04.030.137S380 04.030.938S 04.030.939S 04.030.038S 04.030.039S 04.030.138S 04.030.139S400 04.030.940S 04.030.941S 04.030.040S 04.030.041S 04.030.140S 04.030.141S420 04.030.942S 04.030.943S 04.030.042S 04.030.043S 04.030.142S 04.030.143S440 04.030.944S 04.030.945S 04.030.044S 04.030.045S 04.030.144S 04.030.145S460 04.030.946S 04.030.947S 04.030.046S 04.030.047S 04.030.146S 04.030.147S480 04.030.948S 04.030.949S 04.030.048S 04.030.049S 04.030.148S 04.030.149S
green
9 10 11 Right Left Right Left Right Left
Diameter in mm
Lengthin mm
aqua
14 15 16 Right Left Right Left Right Left
Titanium Cannulated Lateral Entry Femoral Nails-EX, sterile
300 04.030.430S 04.030.431S 04.030.530S 04.030.531S 04.030.630S 04.030.631S320 04.030.432S 04.030.433S 04.030.532S 04.030.533S 04.030.632S 04.030.633S340 04.030.434S 04.030.435S 04.030.534S 04.030.535S 04.030.634S 04.030.635S360 04.030.436S 04.030.437S 04.030.536S 04.030.537S 04.030.636S 04.030.637S380 04.030.438S 04.030.439S 04.030.538S 04.030.539S 04.030.638S 04.030.639S400 04.030.440S 04.030.441S 04.030.540S 04.030.541S 04.030.640S 04.030.641S420 04.030.442S 04.030.443S 04.030.542S 04.030.543S 04.030.642S 04.030.643S440 04.030.444S 04.030.445S 04.030.544S 04.030.545S 04.030.644S 04.030.645S460 04.030.446S 04.030.447S 04.030.546S 04.030.547S 04.030.646S 04.030.647S480 04.030.448S 04.030.449S 04.030.548S 04.030.549S 04.030.648S 04.030.649S
Diameter in mm
Lengthin mm
green
12 13 Right Left Right Left
300 04.030.230S 04.030.231S 04.030.330S 04.030.331S320 04.030.232S 04.030.233S 04.030.332S 04.030.333S340 04.030.234S 04.030.235S 04.030.334S 04.030.335S360 04.030.236S 04.030.237S 04.030.336S 04.030.337S380 04.030.238S 04.030.239S 04.030.338S 04.030.339S400 04.030.240S 04.030.241S 04.030.340S 04.030.341S420 04.030.242S 04.030.243S 04.030.342S 04.030.343S440 04.030.244S 04.030.245S 04.030.344S 04.030.345S460 04.030.246S 04.030.247S 04.030.346S 04.030.347S480 04.030.248S 04.030.249S 04.030.348S 04.030.349S
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-44IM Nai
lsIntramedullary Implants
Femoral Nails— continued
9 10 11 12
300 464.30 465.30 466.30 467.30320 464.32 465.32 466.32 467.32340 464.34 465.34 466.34 467.34360 464.36 465.36 466.36 467.36380 464.38 465.38 466.38 467.38400 464.40 465.40 466.40 467.40420 464.42 465.42 466.42 467.42440 464.44 465.44 466.44 467.44460 464.46 465.46 466.46 467.46480 464.48 465.48 466.48 467.48
Diameter in mmLengthin mm
Titanium Solid Femoral Nails◊ (green)
Titanium Cannulated Femoral Nails◊ (green)
10 11 12 13 14 15
300 474.031 474.131 474.231 474.331 474.431 474.531320 474.032 474.132 474.232 474.332 474.432 474.532340 474.034 474.134 474.234 474.334 474.434 474.534360 474.036 474.136 474.236 474.336 474.436 474.536380 474.038 474.138 474.238 474.338 474.438 474.538400 474.041 474.141 474.241 474.341 474.441 474.541420 474.042 474.142 474.242 474.342 474.442 474.542440 474.044 474.144 474.244 474.344 474.444 474.544460 474.046 474.146 474.246 474.346 474.446 474.546480 474.048 474.148 474.248 474.348 474.448 474.548
Diameter in mmLengthin mm
◊Available nonsterile or sterile-packed. Add S to catalog number to order sterile product.
Illustrations not actual size
5/11
R
2-45IM
Nails
Titanium Cannulated Retrograde/Antegrade Femoral Nails-EX, sterile 160 mm to 280 mm lengths for retrograde insertion 300 mm to 480 mm lengths for retrograde or antegrade insertion
Intramedullary Implants
Femoral Nails— continued
Diameter in mmLengthin mm
160* 04.013.312S 04.013.412S 04.013.512S 04.013.612S 04.013.712S 04.013.812S 04.013.912S180* 04.013.316S 04.013.416S 04.013.516S 04.013.616S 04.013.716S 04.013.816S 04.013.916S200* 04.013.320S 04.013.420S 04.013.520S 04.013.620S 04.013.720S 04.013.820S 04.013.920S220* 04.013.324S 04.013.424S 04.013.524S 04.013.624S 04.013.724S 04.013.824S 04.013.924S240* 04.013.328S 04.013.428S 04.013.528S 04.013.628S 04.013.728S 04.013.828S 04.013.928S260* 04.013.332S 04.013.432S 04.013.532S 04.013.632S 04.013.732S 04.013.832S 04.013.932S280* 04.013.336S 04.013.436S 04.013.536S 04.013.636S 04.013.736S 04.013.836S 04.013.936S300 04.013.340S 04.013.440S 04.013.540S 04.013.640S 04.013.740S 04.013.840S 04.013.940S320 04.013.344S 04.013.444S 04.013.544S 04.013.644S 04.013.744S 04.013.844S 04.013.944S340 04.013.348S 04.013.448S 04.013.548S 04.013.648S 04.013.748S 04.013.848S 04.013.948S360 04.013.352S 04.013.452S 04.013.552S 04.013.652S 04.013.752S 04.013.852S 04.013.952S380 04.013.356S 04.013.456S 04.013.556S 04.013.656S 04.013.756S 04.013.856S 04.013.956S400 04.013.360S 04.013.460S 04.013.560S 04.013.660S 04.013.760S 04.013.860S 04.013.960S420 04.013.364S 04.013.464S 04.013.564S 04.013.664S 04.013.764S 04.013.864S 04.013.964S440 04.013.368S 04.013.468S 04.013.568S 04.013.668S 04.013.768S 04.013.868S 04.013.968S460 04.013.372S 04.013.472S 04.013.572S 04.013.672S 04.013.772S 04.013.872S 04.013.972S480 04.013.376S 04.013.476S 04.013.576S 04.013.676S 04.013.776S 04.013.876S 04.013.976S
green aqua 9 10 11 12 13 14 15
*Retrograde only.
160 450.701 450.781 450.801 450.821 450.841200 450.702 450.782 450.802 450.822 450.842240 450.703 450.783 450.803 450.823 450.843280 450.704 450.784 450.804 450.824 450.844300 450.705 450.785 450.805 450.825 450.845320 450.706 450.786 450.806 450.826 450.846340 450.707 450.787 450.807 450.827 450.847360 450.708 450.788 450.808 450.828 450.848380 450.709 450.789 450.809 450.829 450.849400 450.710 450.790 450.810 450.830 450.850420 450.711 450.791 450.811 450.831 450.851440 450.712 450.792 450.812 450.832 450.852460 450.713 450.793 450.813 450.833 450.853180 450.714 450.794 450.814 450.834 450.854220 450.715 450.795 450.815 450.835 450.855260 450.716 450.796 450.816 450.836 450.856
Diameter in mmLengthin mm 9 10 11 12 13
Solid Cannulated
Titanium Distal Femoral Nails◊ (aqua)
◊Available nonsterile or sterile-packed. Add S to catalog number to order sterile product.
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-46IM Nai
ls
300 274.08S 274.18S 274.28S 274.38S 274.48S 274.58S 274.68S 274.78S 274.88S _ 320 274.09S 274.19S 274.29S 274.39S 274.49S 274.59S 274.69S 274.79S 274.89S _
340 274.00S 274.10S 274.20S 274.30S 274.40S 274.50S 274.60S 274.70S 274.80S _ 360 274.01S 274.11S 274.21S 274.31S 274.41S 274.51S 274.61S 274.71S 274.81S _
380 274.02S 274.12S 274.22S 274.32S 274.42S 274.52S 274.62S 274.72S 274.82S 274.92S 400 274.03S 274.13S 274.23S 274.33S 274.43S 274.53S 274.63S 274.73S 274.83S 274.93S
420 274.04S 274.14S 274.24S 274.34S 274.44S 274.54S 274.64S 274.74S 274.84S 274.94S 440 274.05S 274.15S 274.25S 274.35S 274.45S 274.55S 274.65S 274.75S 274.85S 274.95S
460 274.06S 274.16S 274.26S 274.36S 274.46S 274.56S 274.66S 274.76S 274.86S 274.96S 480 274.07S 274.17S 274.27S 274.37S 274.47S 274.57S 274.67S 274.77S 274.87S 274.97S
Intramedullary Implants
Femoral Nails— continued
Universal Femoral Nails, sterile
Profile
Radius of Curvature: 1.5 metersFully slotted Proximal Keystone slotCross Section: Tubular, 1.2 mm wall thickness
Note: 4.9 mm Locking Bolts, 259. series, are used to lock nails, see page 2–53.
10 11 12 13 14 15 16 17 18 19
Diameter in mmLengthin mm
5/11
R
2-47IM
Nails
Titanium Cannulated Hindfoot Arthrodesis Nails-EX, sterile (green)
Diameter Length04.008.010S 10 mm 150 mm right04.008.016S 10 180 right04.008.028S 10 240 right04.008.060S 10 150 left04.008.066S 10 180 left04.008.078S 10 240 left 04.008.210S 12 150 right04.008.216S 12 180 right04.008.228S 12 240 right04.008.260S 12 150 left04.008.266S 12 180 left04.008.278S 12 240 left 04.008.310S 13 150 right04.008.316S 13 180 right04.008.328S 13 240 right04.008.360S 13 150 left04.008.366S 13 180 left04.008.378S 13 240 left
Intramedullary Implants
Hindfoot Arthrodesis Nails
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-48IM Nai
lsIntramedullary Implants
Locking Screws for Titanium Intramedullary Nails
Total Length, 4.0 mm Diameter 5.0 mm Diameter 6.0 mm Diameter mm (blue) (green) (aqua) 18 04.005.408 — — 20 04.005.410 — — 22 04.005.412 — — 24 04.005.414 — — 26 04.005.416 04.005.516 04.005.616 28 04.005.418 04.005.518 04.005.618 30 04.005.420 04.005.520 04.005.620 32 04.005.422 04.005.522 04.005.622 34 04.005.424 04.005.524 04.005.624 36 04.005.426 04.005.526 04.005.626 38 04.005.428 04.005.528 04.005.628 40 04.005.430 04.005.530 04.005.630 42 04.005.432 04.005.532 04.005.632 44 04.005.434 04.005.534 04.005.634 46 04.005.436 04.005.536 04.005.636 48 04.005.438 04.005.538 04.005.638 50 04.005.440 04.005.540 04.005.640 52 04.005.442 04.005.542 04.005.642 54 04.005.444 04.005.544 04.005.644 56 04.005.446 04.005.546 04.005.646 58 04.005.448 04.005.548 04.005.648 60 04.005.450 04.005.550 04.005.650 62 04.005.452 04.005.552 — 64 04.005.454 04.005.554 04.005.654 66 04.005.456 04.005.556 — 68 04.005.458 04.005.558 04.005.658 70 04.005.460 04.005.560 — 72 04.005.462 04.005.562 04.005.662 74 04.005.464 04.005.564 — 76 04.005.466 04.005.566 04.005.666 78 04.005.468 04.005.568 — 80 04.005.470 04.005.570 04.005.670 85 — 04.005.575 04.005.675 90 — 04.005.580 04.005.680 95 — 04.005.585 04.005.685 100 — 04.005.590 04.005.690 105 — — 04.005.691 110 — — 04.005.692 115 — — 04.005.693 120 — — 04.005.694 125 — — 04.005.695
Profile:Dia. of head 8 mmDia. of core 3.3 mm (4.0 mm screws) 4.3 mm (5.0 mm screws) 4.8 mm (6.0 mm screws)Thread pitch 1.25 mm (4.0 mm screws) 1.25 mm (5.0 mm screws) 1.75 mm (6.0 mm screws)
Titanium Locking Screws, with T25 Stardrive recess�
for titanium intramedullary nails Self-tapping, blunt tip Double-lead thread
◊Available nonsterile or sterile-packed. Add S to catalog number to order sterile product.
Illustrations not actual size
5/11
R
2-49IM
Nails
Intramedullary Implants
Locking Screws for Titanium Intramedullary Nails— continued
◊Available nonsterile or sterile-packed. Add S to catalog number to order sterile product.
Total Length, 4.0 mm Diameter 5.0 mm Diameter 6.0 mm Diameter mm (blue) (green) (aqua) 18 458.818 — — 20 458.820 — — 22 458.822 — — 24 458.824 — — 26 458.826 458.926 — 28 458.828 458.928 — 30 458.830 458.930 450.873 32 458.832 458.932 — 34 458.834 458.934 — 35 — — 450.874 36 458.836 458.936 — 38 458.838 458.938 — 40 458.840 458.940 450.875 42 458.842 458.942 — 44 458.844 458.944 — 45 — — 450.861 46 458.846 458.946 — 48 458.848 458.948 — 50 458.850 458.950 450.862 52 458.852 458.952 — 54 458.854 458.954 — 55 — — 450.863 56 458.856 458.956 — 58 458.858 458.958 — 60 458.860 458.960 450.864 62 458.862 — — 64 458.864 458.964 — 65 — — 450.865 66 458.866 — — 68 458.868 458.968 — 70 458.870 — 450.866 72 458.872 458.972 — 74 458.874 — — 75 — — 450.867 76 458.876 458.976 — 78 458.878 — — 80 458.880 458.980 450.868 85 — 458.985 450.869 90 — 458.990 450.870 95 — 458.995 450.871 100 — 458.999 450.872
Profile: Dia. of head 8 mmDia. of core 3.3 mm (4.0 mm screws) 4.3 mm (5.0 mm screws) 4.8 mm (6.0 mm screws)Thread pitch 1.25 mm (4.0 mm screws) 1.25 mm (5.0 mm screws) 1.75 mm (6.0 mm screws)
Titanium Locking Screws, with 3.5 mm hex recess�
for titanium intramedullary nails Self-tapping, blunt tip Double-lead thread Cross hairs on head distinguish locking screws from locking bolts
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-50IM Nai
lsIntramedullary Implants
ASLS Screws
Total Length, 4.0 mm Diameter 5.0 mm Diameter 6.0 mm Diameter mm (brown) (light blue) (dark purple) 26 04.025.416S — — 28 04.025.418S — — 30 04.025.420S 04.025.520S — 32 04.025.422S 04.025.522S 04.025.622S 34 04.025.424S 04.025.524S 04.025.624S 36 04.025.426S 04.025.526S 04.025.626S 38 04.025.428S 04.025.528S 04.025.628S 40 04.025.430S 04.025.530S 04.025.630S 42 04.025.432S 04.025.532S 04.025.632S 44 04.025.434S 04.025.534S 04.025.634S 46 04.025.436S 04.025.536S 04.025.636S 48 04.025.438S 04.025.538S 04.025.638S 50 04.025.440S 04.025.540S 04.025.640S 52 04.025.442S 04.025.542S 04.025.642S 54 04.025.444S 04.025.544S 04.025.644S 56 04.025.446S 04.025.546S 04.025.646S 58 04.025.448S 04.025.548S 04.025.648S 60 04.025.450S 04.025.550S 04.025.650S 62 04.025.452S 04.025.552S 04.025.652S 64 04.025.454S 04.025.554S 04.025.654S 66 04.025.456S 04.025.556S 04.025.656S 68 04.025.458S 04.025.558S 04.025.658S 70 04.025.460S 04.025.560S 04.025.660S 72 04.025.462S 04.025.562S 04.025.662S 74 04.025.464S 04.025.564S 04.025.664S 76 04.025.466S 04.025.566S 04.025.666S 78 04.025.468S 04.025.568S 04.025.668S 80 04.025.470S 04.025.570S 04.025.670S 85 — 04.025.575S 04.025.675S 90 — 04.025.580S 04.025.680S 95 — 04.025.585S 04.025.685S 100 — 04.025.590S 04.025.690S 105 — — 04.025.695S 110 — — 04.025.700S 115 — — 04.025.705S 120 — — 04.025.710S 125 — — 04.025.715S
Profile:Dia. of head 8 mmThread pitch 1.25 mm
Angular Stable Locking Screws (ASLS), with T25 Stardrive recess, sterile for titanium cannulated intramedullary nails Self-tapping, blunt tip
Resorbable Sleeves, sterile08.025.032S for 4.0 mm Angular Stable Locking Screw08.025.044S for 5.0 mm Angular Stable Locking Screw08.025.057S for 6.0 mm Angular Stable Locking Screw
Illustrations not actual size
5/11
R
2-51IM
Nails
Intramedullary Implants
Locking Bolts for Titanium Intramedullary Nails
◊Available nonsterile or sterile-packed. Add S to catalog number to order sterile product.
Total Length, 3.9 mm Diameter 4.9 mm Diameter mm (blue) (green) 18 458.18 — 20 458.20 — 22 458.22 — 24 458.24 — 26 458.26 459.26 28 458.28 459.28 30 458.30 459.30 32 458.32 459.32 34 458.34 459.34 36 458.36 459.36 38 458.38 459.38 40 458.40 459.40 42 458.42 459.42 44 458.44 459.44 46 458.46 459.46 48 458.48 459.48 50 458.50 459.50 52 458.52 459.52 54 458.54 459.54 56 458.56 459.56 58 458.58 459.58 60 458.60 459.60 62 458.62 — 64 458.64 459.64 66 458.66 — 68 458.68 459.68 70 458.70 — 72 458.72 459.72 74 458.74 — 76 458.76 459.76 78 458.78 — 80 458.80 459.80 85 — 459.85 90 — 459.90 95 — 459.95 100 — 459.100
Profile:Dia. of head 8 mmDia. of core 3.25 mm (3.9 mm screws) 4.25 mm (4.9 mm screws)Thread pitch 2.3 mm (3.9 mm screws) 2.75 mm (4.9 mm screws)
Titanium Locking Bolts, with 3.5 mm hex recess�
for titanium intramedullary nails self-tapping, trocar tip
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-52IM Nai
lsIntramedullary Implants
Locking Bolts for Universal Nails
4.9 mm Locking Bolts, with 3.5 mm hex recess for Universal Femoral and Tibial Nails self-cutting, trocar tip
259.26 26 mm259.28 28259.30 30259.32 32259.34 34259.36 36259.38 38259.40 40259.42 42259.44 44259.46 46259.48 48259.50 50259.52 52
259.54 54 mm259.56 56259.58 58259.60 60259.64 64259.68 68259.72 72259.76 76259.80 80259.85 85259.90 90259.95 95259.100 100
Length Length
Profile:
Dia. of core 4.3 mmDia. of head 8.0 mmThread pitch 2.75 mm
Profile:
Dia. of head 8 mmThread pitch 1.75 mm
◊Available nonsterile or sterile-packed. Add S to catalog number to order sterile product.
5.0 mm Titanium Dual Core Locking Screws, with T25 StarDrive recess◊ (gold) for intramedullary nails (Tibial Nails-EX) self-tapping, blunt tip
04.015.518S* 28 mm04.015.520 3004.015.522S* 3204.015.525 3504.015.527S* 3704.015.530 4004.015.532S* 4204.015.535 4504.015.537S 47
04.015.540 50 mm04.015.542S* 5204.015.545 5504.015.547S* 5704.015.550 6004.015.552S* 6204.015.555 6504.015.557S* 6704.015.560 70
Length Length
04.015.562S* 72 mm04.015.565 7504.015.567S* 7704.015.570 8004.015.572S* 8204.015.575 8504.015.577S* 8704.015.580 90
Length
5.0 mm Titanium Shaft Screws, 16 mm thread length, with 3.5 mm hex recess◊ (gold) Self-tapping
457.070 70 mm457.075 75457.080 80457.085 85457.090 90457.095 95
457.100 100 mm457.105 105457.110 110457.115 115457.120 120457.125 125
Length Length Profile:
Thread pitch 1.75 mmDia. of core 3.5 mmDia. of head 8.0 mm
Locking Screws and Shaft Screws for Nails
*Available sterile only
Illustrations not actual size
5/11
R
2-53IM
Nails
Intramedullary Implants
Recon Screws
◊Available nonsterile or sterile-packed. Add S to catalog number to order sterile product.
Total Length, 5.0 mm Diameter 6.5 mm Diameter mm (purple) (gold) 50 04.031.020 — 55 04.031.021 — 60 04.031.022 04.003.022 65 04.031.023 04.003.023 70 04.031.024 04.003.024 75 04.031.025 04.003.025 80 04.031.026 04.003.026 85 04.031.027 04.003.027 90 04.031.028 04.003.028 95 04.031.029 04.003.029 100 04.031.030 04.003.030 105 04.031.031 04.003.031 110 04.031.032 04.003.032 115 04.031.033 04.003.033 120 04.031.034 04.003.034 125 04.031.035 04.003.035 130 — 04.003.036
Profile:Dia. of head 8.2 mmDia. of core 3.5 mm 4.5 mm (6.5 mm screws)Thread pitch 1.75 mm (double lead) (5.0 mm screws) 2.4 mm (6.5 mm screws)
Titanium Recon Screws, with T25 StarDrive recess�
30 mm thread length, self-tapping
Trochanteric Fixation Nail Screws
11.0 mm Titanium Trochanteric Fixation Nail Screws, sterile04.032.070S 70 mm04.032.075S 7504.032.080S 8004.032.085S 8504.032.090S 9004.032.095S 9504.032.100S 10004.032.105S 10504.032.110S 11004.032.115S 11504.032.120S 12004.032.125S 12504.032.130S 130
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-54IM Nai
lsIntramedullary Implants
Helical and Spiral Blades
11.0 mm Titanium Helical Blades◊ (gold) for Titanium Trochanteric Fixation Nails Length456.300S 75 mm (sterile only)456.301 80 456.302 85 456.303 90 456.304 95 456.305 100 456.306 105 456.307 110 456.308 115 456.309 120 456.310S 125 (sterile only)456.650S 130 (sterile only)
◊Available nonsterile or sterile-packed. Add S to catalog number to order sterile product.
Titanium Spiral Blades◊ (gold) For Titanium Humeral Nails and Titanium Humeral Nails–EX
Length462.634 34 mm462.636 36462.638 38462.640 40462.642 42462.644 44462.646 46462.648 48462.650 50462.652 52462.654 54
. Titanium Spiral Blades◊ (gold) for Titanium Retrograde Femoral Nail-EX and Titanium Hindfoot Arthrodesis Nail-EX
Length04.013.041 45 mm04.013.042 50 mm04.013.043 55 mm04.013.044 60 mm04.013.045 65 mm04.013.046 70 mm04.013.047 75 mm04.013.048 80 mm04.013.049 85 mm04.013.050 90 mm04.013.051 95 mm04.013.052 100 mm
Illustrations not actual size
5/11
R
2-55IM
Nails
Titanium Spiral Blades◊ (light blue) For Titanium Femoral Nails
Intramedullary Implants
Spiral Blades and Locking Sleeves
456.70 70 mm456.75 75456.80 80456.85 85
456.90 90 mm456.95 95456.100 100456.105 105
456.110 110 mm456.115 115456.120 120
Length Length Length
Titanium Locking Sleeves◊ For 9 mm-12 mm Titanium Femoral Nails
For Spiral Blade Locking (light blue)456.010 100°456.011 110°456.012 120°
456.013 For 130° Locking (pink)
100° 110° 120° 130°
STANDARD 100° 10° 120° 130° Titanium Locking Sleeves◊ For 13 mm-15 mm Titanium Femoral Nails
474.900 For Standard Locking (green)
For Spiral Blade Locking (light blue)474.910 100° 474.911 110° 474.912 120°
474.913 For 130° Locking (pink)
◊Available nonsterile or sterile-packed. Add S to catalog number to order sterile product.
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-56IM Nai
lsIntramedullary Implants
End Caps
275.900 End Cap, for 3.0 mm–4.0 mm diameter Elastic Nails475.900 Titanium End Cap◊ for 3.0 mm–4.0 mm diameter Titanium Elastic Nails
Titanium End Caps, with T25 StarDrive recess◊ (gold) for Titanium Humeral Nail-EX Spiral Blade
Extension04.001.000 0 mm04.001.001 504.001.002 1004.001.003 15
◊Available nonsterile or sterile-packed. Add S to catalog number to order sterile product.
Titanium End Caps◊ (blue) For Titanium Solid Humeral Nails
Extension462.950 0 mm with 2.5 mm hex recess462.955 5 with 3.5 mm hex recess462.960 10 with 3.5 mm hex recess462.965 15 with 3.5 mm hex recess
Titanium End Caps◊ (gold) For Humeral Nail Spiral Blade
Extension462.660 0 mm with T15 StarDrive recess462.665 5 with 3.5 mm hex recess462.666 10 with 3.5 mm hex recess462.667 15 with 3.5 mm hex recess
Titanium End Caps◊, T40 StarDrive recess (gold) for Titanium Tibial Nail-EX Extension04.004.000 0 mm04.004.001 504.004.002 1004.004.003 15
Illustrations not actual size
5/11
R
2-57IM
Nails
Intramedullary Implants
End Caps— continued
Titanium End Caps, with T40 StarDrive recess, extended tip design for Tibial Nails–EX◊ (gray)
Extension04.004.008 0 mm 04.004.009 5 04.004.010 10 04.004.011 15
458.10 Titanium End Cap◊ (blue) For Titanium Solid Tibial Nails
458.120 Titanium End Cap◊ (green) For Titanium Cannulated Tibial Nails
Titanium End Caps with T40 StarDrive◊ for Adolescent Lateral Entry Femoral Nail–EX
Extension04.031.000 0 mm 04.031.001 5 04.031.002 10 04.031.003 15
12 mm Titanium End Caps, T40 StarDrive◊ for Femoral Nails-EX04.003.001 5 mm extension04.003.002 10 mm extension04.003.003 15 mm extension04.003.004 20 mm extension
16 mm Titanium End Caps, T40 StarDrive◊ for Lateral Entry Femoral Nails-EX04.003.006 5 mm extension04.003.007 10 mm extension04.003.008 15 mm extension04.003.009 20 mm extension
◊Available nonsterile or sterile-packed. Add S to catalog number to order sterile product.
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-58IM Nai
ls
15 mm Titanium End Caps◊ (pink) For 130° Titanium Locking Sleeve For use with 9 mm–15 mm femoral nails
Extension457.210 0 mm 457.211 10 457.212 20
12 mm Titanium End Caps◊ (green) For use with 9 mm–12 mm femoral nails
Extension459.012 0 mm 459.013 10 459.014 20
15 mm Titanium End Caps◊ (green) For Standard Titanium Locking Sleeve For use with 13 mm–15 mm femoral nails
Extension474.920 0 mm 474.921 10 474.922 20
Intramedullary Implants
End Caps— continued
◊Available nonsterile or sterile-packed. Add S to catalog number to order sterile product.
20 mm
10 mm
0 mm
20 mm
10 mm
0 mm
15 mm Titanium End Caps◊ (light blue) For Spiral Blade Locking Sleeve For use with 9 mm–15 mm femoral nails
Extension457.010 0 mm457.011 10457.012 20
10 mm
0 mm
20 mm
10 mm
0 mm
20 mm
450.896 Titanium End Cap◊ (aqua) For Titanium Distal Femoral Nail
Illustrations not actual size
5/11
R
2-59IM
Nails
Intramedullary Implants
End Caps— continued
04.013.000 Titanium End Cap, T40 StarDrive◊ (gold) for Titanium Retrograde Femoral Nail-EX Spiral Blade
Titanium End Caps◊04.008.000 Titanium End Cap, with T25 StarDrive recess,
for Hindfoot Arthrodesis Nail–EX Spiral Blade04.008.001 Titanium End Cap, with T25 StarDrive recess,
for Hindfoot Arthrodesis Nail–EX
292.26 2.5 mm Kirschner Wire, 285 mm, trocar point (10/pkg.)
Guide Wires292.69 3.2 mm Calibrated Guide Wire, 300 mm, for use with Titanium Solid Femoral Nails and Titanium Spiral Blades292.656 2.0 mm Non-Threaded Guide Wire, 230 mm, spade point900.723 2.5 mm Threaded Guide Wire, 230 mm, spade point900.726 2.8 mm Threaded Guide Wire, 450 mm, trocar point, 300 mm calibration
◊Available nonsterile or sterile-packed. Add S to catalog number to order sterile product.
Wires
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-60IM Nai
lsIntramedullary Instruments
Air Jet
351.81 2.0 mm Air Tube For cleaning flexible shafts and cannulated instruments Used with Air Jet (351.80
351.80 Air Jet For cleaning the instruments with compressed air (nitrogen) With connector for standard Synthes hoses Not to be sterilized
Awls
03.010.039 10.0 mm Cannulated Awl
03.010.040 12.0 mm Cannulated Awl For Tibial Nail-EX
03.010.041 14.0 mm Canulated Awl For Femoral Nails-EX
351.02 Small Awl, 210 mm length for Titanium Flexible Humeral Nail
Illustrations not actual size
5/11
R
2-61IM
Nails
Awls— continued
351.11 Large Reverse Awl
351.12 Cannulated Awl with T-Handle
357.412 Cannulated Reverse Awl
Intramedullary Instruments
359.213 Awl
351.89 Broach For use with Titanium Spiral Blade and 130° Titanium Locking Sleeve
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-62IM Nai
lsIntramedullary Instruments
Cannulated Cutter
351.24 11.0 mm Cannulated Cutter For use with Protection Sleeve (351.26)
351.26 Protection Sleeve For use with 11.0 mm Cannulated Cutter (351.24)
351.06 4.0 mm Centering Pin 400 mm length For use with 11.0 mm Cannulated Cutter (351.24)
Cleaning Brushes and Stylets
352.041 3.6 mm Cleaning Brush352.045 3.6 mm Cleaning Brush, 830 mm03.010.119 4.6 mm Cleaning Brush
357.408 Cleaning Stylet03.010.120 4.6 mm Cleaning Stylet
357.409 Cleaning Brush
Illustrations not actual size
5/11
R
2-63IM
Nails
Conical Burrs
358.68 8.5 mm/3.5 mm Conical Burr with quick coupling
358.681 3.5 mm/8.5 mm Conical Burr quick coupling, 110 mm
358.682 9.5 mm Conical Burr with quick coupling
Intramedullary Instruments
351.15 Flexible Shaft Handle
351.16 Connector For use with Hand Drill (591.00)
351.16J Connector For cannulated reaming machines with a Jacobs chuck of larger than 1/4”
Connectors with Quick Coupling
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-64IM Nai
lsIntramedullary Instruments
Cutter
359.217 Cutter For use with Titanium Elastic Nails
Depth Gauges/Measuring Devices
03.010.072 Depth Gauge For locking screws to 100 mm
357.79 Depth Gauge For 3.9 mm and 4.9 mm Locking Bolts For use with Titanium Tibial, Femoral and Humeral Nails
357.402 Locking Bolt Measuring Device
357.792 Locking Bolt Measuring Device For use with Titanium Tibial Nails
357.113 Locking Bolt Measuring Device For use with Titanium Distal Femoral Nail System
357.385 Helical Blade Measuring Device
Illustrations not actual size
5/11
R
2-65IM
Nails
Intramedullary Instruments
Depth Gauges/Measuring Devices— continued
03.010.090 Spiral Blade Measuring Device
358.698 Spiral Blade Measuring Device
03.010.083 Specialty Locking Measuring Device For Retrograde Femoral Nails-EX
03.010.085 Specialty Locking Measuring Device For Femoral Nails-EX
351.717 Depth Gauge For use with 2.5 mm Reaming Rod with ball tip
351.719 Extension Tube for Depth Gauge
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-66IM Nai
ls
Distal Aiming Device
355.66 Femoral Fixation Bolt, for use with 4.9 mm Locking Bolts Anchors the Distal Aiming Device (355.60) to the femur during the distal aiming/locking procedure
355.67 Tibial Fixation Bolt, for use with 4.9 mm Locking Bolts Anchors the Distal Aiming Device (355.60) to the tibia during the distal aiming/locking procedure
355.64 Aiming Trocar Positions the Distal Aiming Device (355.60) over the locking hole
355.62 Direction Finder Aligns the Distal Aiming Device (355.60) over the locking hole
355.60 Distal Aiming Device Serves as a protective sleeve for drilling, measuring bolt length, and inserting distal locking bolts
Intramedullary Instruments
Illustrations not actual size
5/11
R
2-67IM
Nails
Intramedullary Instruments
Drill Bits/Drill Stops
Three-Fluted Drill Bits, quick coupling For use with the Oscillating Drill Attachment (511.20)
Diameter Total Length315.28 2.7 mm 125 mm315.31 3.2 145 315.29 3.2 195 315.40 4.0 195 315.48 4.5 195
Drill Bits, quick coupling
Diameter Total Length310.02 3.2 mm 225 mm355.90 4.0/4.5 225310.44 4.5 145
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-68IM Nai
ls
Drill Bits/Drill Stops
Three-Fluted Calibrated Drill Bits, quick coupling
Diameter Length Calibration315.330 3.2 mm 210 mm 68 mm356.97 3.2 215 80356.972 3.2 215 8203.010.060 3.2 330 100356.982 4.0 215 80357.407 4.0 260 65356.98 4.0 270 95356.95 4.0/4.5 225 10003.010.061 4.2 330 100357.099 5.0 330 10003.010.062 5.0 330 10003.008.008 5.0 356 126
Three-Fluted Drill Bits, needle point◊, for use with Radiolucent Drive quick coupling, 145 mm03.010.100 3.2 mm, for Tibial Nail-EX03.010.101 4.0 mm, for Tibial and Femoral Nails-EX03.010.102 5.0 mm, for Femoral Nails-EX
◊Drill bits available nonsterile or sterile-packed. Add S to catalog number for sterile product.
Three-Fluted Drill Bits, needle point◊
quick coupling, 145 mm03.010.103 3.2 mm, for Tibial Nail-EX03.010.104 4.2 mm, for Tibial and Femoral Nails-EX03.010.105 5.0 mm, for Femoral Nails-EX
358.691 4.5 mm Cannulated Drill Bit◊ Jacobs chuck, 170 mm, with 102 mm stop
03.010.089 4.5 mm Cannulated Drill Bit◊ Jacobs chuck, with 135 mm stop, 165 mm
Intramedullary Instruments
Illustrations not actual size
5/11
R
2-69IM
Nails
Intramedullary Instruments
Drill Bits/Drill Stops— continued
03.010.078 4.5 mm/6.5 mm Stepped Drill Bit, large quick coupling, 485 mm03.010.079 Drill Stop, for 4.5 mm/6.5 mm Stepped Drill Bit (03.010.078)
03.010.228 Drill Bit for 5.0 mm Recon Screws, large, quick coupling
03.010.080 Tap for 6.5 mm Recon Screws, 485 mm
357.403 6.0 mm/10.0 mm Stepped Drill Bit, cannulated Large quick coupling, 435 mm
357.405 Drill Stop For use with 6.0 mm/10.0 mm Stepped Drill Bit (357.403)
357.404 11.0 mm Tapered Drill Bit, cannulated Large quick coupling, 280 mm
03.010.036 12.0 mm Cannulated Drill Bit◊
Large quick coupling, 190 mm For Tibial Nail-EX
◊Drill bits available nonsterile or sterile-packed. Add S to catalog number for sterile product.
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-70IM Nai
ls
Drill Bits/Drill Stops— continued
351.27 13 mm Cannulated Drill Bit◊, 300 mm For use with 3.2 mm Calibrated
Guide Wire (292.69)
◊Drill bits available nonsterile or sterile-packed. Add S to catalog number for sterile product.
Cannulated Drill Bits, large quick coupling (nonsterile only) For Lateral Entry Femoral Nail-EX03.010.028 15.0 mm, 280 mm03.010.029 17.0 mm, 280 mm
357.394 17.0 mm Cannulated Drill Bit Large quick coupling, 300 mm
Cannulated Flexible Drill Bits, large, quick coupling
Diameter Total Length03.010.034 13.0 mm 465 mm03.010.165 15.0 31003.010.167 17.0 310
Flexible Drill Bits 385 mm, large quick coupling360.257 13.0 mm360.258 15.5 mm
Intramedullary Instruments
Illustrations not actual size
5/11
R
2-71IM
Nails
Medullary Reamers
351.43 8.0 mm Flexible Shaft, 360 mm
Intramedullary Instruments
Drive and Flexible Shafts for Reaming
5.0 mm Flexible Shafts352.040 470 mm352.044 620 mm
Reamer/Irrigator/Aspirator Drive Shafts for use with RIA314.742 minimum 360 mm length314.743 minimum 520 mm length
RIA Tube Assemblies, sterile314.745S minimum 360 mm length, for 314.742314.746S minimum 520 mm length, for 314.743
351.718S Drive Shaft Seal, for RIA, sterile352.260S Locking Clip, for Reamer/Irrigator/Aspirator, sterile
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-72IM Nai
ls
Drive Shaft for Nail Removal
356.340 Drive Shaft, 490 mm
Extractor Heads
Extractor Heads For use with Ratchet Grip (356.350), Drive Shaft (356.340) and Flexible Shafts (351.43) and (351.47)356.328 For 8 mm nails356.329 For 9 mm nails356.330 For 10 mm nails356.331 For 11 mm nails356.332 For 12 mm nails
Extraction Hooks
355.33 Connector For use with Threaded Extraction Hooks
Threaded Extraction Hooks, extra long
For extraction of broken medullary nails For use with Connector (355.33) 355.37 For 10–11 mm dia. nails
355.38 For 11–14 mm dia. nails
355.39 For 14 mm dia. and larger nails
Threaded Extraction Hooks
For non-ASIF nails (Küntscher nails, etc.) only For use with Connector (355.33) 355.35 For 9–11 mm dia. nails
355.36 For 11 mm dia. and larger nails
Intramedullary Instruments
Illustrations not actual size
5/11
R
2-73IM
Nails
Intramedullary Instruments
Extraction Hooks— continued
355.399 Extraction Hook◊, 650 mm length For removal of Titanium Cannulated Femoral Nails and Titanium Cannulated Tibial Nails
◊Available nonsterile or sterile-packed. Add S to catalog number to order sterile product.
358.699 Inserter/Extractor
Extraction Screws
356.543 Extraction Screw for Titanium Tibial Nail
357.36 Extraction Screw For removal of Titanium Femoral Nails and Titanium Spiral Blades
357.133 Extraction Screw For Titanium Femoral and Tibial Nails
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-74IM Nai
ls
Extraction Screws— continued
357.396 Extraction Screw For Trochanteric Fixation Nails
357.420 Conical Extraction Bolt, For Trochanteric Fixation Nails
357.421 Extraction Screw Guide For Trochanteric Fixation Nails
357.378 Helical Blade Extractor
Forceps
351.78 Holding Forceps For use with reaming rods
Intramedullary Instruments
Illustrations not actual size
5/11
R
2-75IM
Nails
Intramedullary Instruments
Forceps— continued
351.782 Holding Forceps For 5.0 mm Flexible Shaft
319.97 Screw Forceps For removing screws from screw rack
F-Tool
359.209 Small F-Tool (consists of 1 ea. 359.207 and 3 ea. 359.208)
359.208 Threaded Rod For Small F-Tool
359.207 Bar For Small F-Tool
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-76IM Nai
ls
Graft Filter
352.229S Graft Filter for RIA, sterile
Guide Wires
03.010.025 2.0 mm Kirschner Wire with trocar point, 240 mm
03.010.115 3.2 mm Guide Wire 290 mm For Retrograde/Antegrade Femoral Nails
357.399 3.2 mm Guide Wire 400 mm
Intramedullary Instruments
03.010.412 Guide Wire Aiming Device for Trochanteric Fixation Nail, for anterior posterior orientation03.010.415 Connecting Screw for Guide Wire Aiming Device03.010.471 Guide Wire Aiming Device, offset block
Illustrations not actual size
5/11
R
2-77IM
Nails
Hammers
399.41 Weight approx. 350 grams
399.42 Weight approx. 500 grams Standard size399.43 Weight approx. 700 grams
Intramedullary Instruments
Hammers, Hammer Guides and Driving Caps
03.010.058 Slide/Fixed Hammer 400 grams
03.010.059 Hammer Guide for Slide Hammer, 400 grams
03.010.056 Slide/Fixed Hammer 700 grams For Tibial and Femoral Nails-EX
03.010.047 Driving Cap with Handle Adapter For Tibial and Femoral Nails-EX
357.25 Slide Hammer For use with Hammer Guide
(357.22)
357.22 Hammer Guide For use with Slide Hammer (357.25)
359.225 Locking Slide Hammer 400 grams
359.218 Hammer Guide For use with Locking Slide Hammer (359.225)
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-78IM Nai
ls
Hammers, Hammer Guides and Driving Caps— continued
357.026 Detachable Slide Hammer 580 grams
357.395 Driving Cap For 357.411
03.008.005 Driving Cap, for Hindfoot Arthrodesis Nail—EX
357.18 Driving Cap
356.49 Inserter-Extractor Attaches to Connecting Screw (356.54) for insertion of Solid Tibial Nails and Titanium Humeral Nails
332.20 Slotted Hammer For use with Inserter-Extractor (356.49)
Intramedullary Instruments
Illustrations not actual size
5/11
R
2-79IM
Nails
Intramedullary Instruments
Hammers, Hammer Guides and Driving Caps— continued
355.25 Ram Used to drive Universal Nails
355.22 Ram Guide Cannulated, for use with Ram (355.25) 455 mm length
355.28 Flexible Grip For use with Ram Guide (355.22)
355.18 Driving Head May be used with Curved Driving Piece (355.16)
Note: Combination Wrench (321.16) and Hammer (399.43) are required when using 355.16 and 355.18.
355.16 Curved Driving Piece For use with Universal Tibial Nails
Important: Never use this instrument for extraction.
359.219 Inserter
359.222 Inserter For Titanium Elastic Nail End Cap
Inserters for Elastic Nails
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-80IM Nai
ls
Insertion Handles, Connecting Screws, Compression Devices and Aiming Arms
03.010.054 Insertion Handle
03.010.053 Cannulated Connecting Screw
03.010.113 Compression Device
03.010.055 Spiral Blade Aiming Arm
03.010.091 Standard Aiming Arm
Intramedullary Instruments
Illustrations not actual size
5/11
R
2-81IM
Nails
Intramedullary Instruments
Insertion Handles, Connecting Screws, Compression Devices and Aiming Arms— continued
358.54 Connecting Screw
358.60 Compression Sleeve
358.61 Compression Connecting Screw
358.679 Extended Aiming Arm
358.689 Standard Aiming Arm
03.010.017 Tibial Nail Insertion Handle
03.010.145 Cannulated Connecting Screw with Internal Thread for Short Insertion Handle
03.010.136 Short Compression Device for Titanium Cannulated Tibial Nails–EX
358.692 Insertion HandleFor use with Aiming Arms (358.679) and (358.689)
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-82IM Nai
ls
Insertion Handles, Connecting Screws, Compression Devices and Aiming Arms— continued
356.511 Titanium Tibial Nail Insertion Handle
356.542 Insertion Bolt for Solid Tibial Nail
356.521 Titanium Tibial Nail Aiming Arm
Intramedullary Instruments
356.544 Insertion Bolt for Titanium Cannulated Tibial Nails
03.010.226 Insertion Handle for Adolescent Lateral Entry Femoral Nail–EX
03.010.227 Aiming Armfor Adolescent Lateral Entry Femoral Nail–EX
Illustrations not actual size
5/11
R
2-83IM
Nails
Intramedullary Instruments
Insertion Handles, Connecting Screws, Compression Devices and Aiming Arms— continued
03.010.045 Standard Insertion HandleFor Tibial and Femoral Nails-EX
03.010.044 Cannulated Connecting ScrewFor Standard Insertion HandleFor Tibial and Femoral Nails-EX
03.010.015 Compression DeviceFor Tibial Nail-EX
03.010.052 Aiming ArmFor Tibial Nail-EX
03.010.127 Aiming ArmFor Lateral Entry Femoral Nail-EX
03.010.048 Recon Locking Aiming Armfor Lateral Entry Femoral Nails–EX
03.010.049 Aiming ArmFor Antegrade Standard Locking of Retrograde/Antegrade Femoral Nails-EX
03.010.050 Aiming ArmFor Retrograde Standard Locking of Retrograde/Antegrade Femoral Nails-EX
03.010.051 Aiming ArmFor Spiral Blade Locking of Retrograde Femoral Nails-EX
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-84IM Nai
lsIntramedullary Instruments
Insertion Handles, Connecting Screws, Compression Devices and Aiming Arms— continued
03.010.046 Percutaneous Insertion HandleFor Retrograde/Antegrade Femoral Nail-EX
03.010.146 Cannulated Connecting Screwwith Internal Thread for Percutaneous Insertion Handle
357.511 Insertion Handle (replaces 357.51)
357.512 Cannulated Connecting ScrewFor insertion of cannulated nailsFor use with Insertion Handle (357.511)
03.010.137 Long Compression Device for Titanium Cannulated Tibial Nails–EX
Photo Not Available
Illustrations not actual size
5/11
R
2-85IM
Nails
Insertion Handles, Connecting Screws, Compression Devices and Aiming Arms— continued
357.54 Connecting ScrewFor Solid NailsFor use with Insertion Handle (357.51) or (357.511)
357.70 Standard Aiming Arm
357.80 Specialty Aiming ArmFor use with Titanium Spiral Blade,130° Antegrade Locking, and Miss-A-Nail Locking
357.411 Insertion Handle
357.397 Cannulated Connecting Screw
357.365 125° Aiming Arm357.366 130° Aiming Arm357.367 135° Aiming Arm
Intramedullary Instruments
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-86IM Nai
lsIntramedullary Instruments
Insertion Handles, Connecting Screws, Compression Devices and Aiming Arms— continued
357.418 Percutaneous Insertion Handle for Trochanteric Fixation Nails
357.419 Percutaneous Cannulated Connecting Screwfor Trochanteric Fixation Nails
357.112 Insertion Handle for Titanium Distal Femoral Nails
357.095 Connecting Screw for Titanium Distal Femoral Nails
357.096 Aiming Arm for 6.0 mm Titanium Locking Screws
Photo Not Available
Illustrations not actual size
5/11
R
2-87IM
Nails
Insertion Handles, Connecting Screws, Compression Devices and Aiming Arms— continued
03.008.007 Insertion Handle for Hindfoot Arthrodesis Nail–EXNote: Use with Cannulated Connecting Screw (03.010.146)
03.008.009 Aiming Armfor Titanium Cannulated Hindfoot Arthrodesis Nail–EX
03.008.010 Aiming Arm Adapterfor Titanium Cannulated Hindfoot Arthrodesis Nail–EX
03.008.004 Threaded Alignment Pin for Hindfoot Arthrodesis Nail–EX
Intramedullary Instruments
355.41 Insertion Handle, For 10 mm–14 mm Universal Tibial Nails355.44 Threaded Conical Bolt, For 10 mm–14 mm Universal Tibial Nails355.47 Locking Nut, For 9 mm–14 mm Universal Tibial Nails
Fits Threaded Conical Bolt (355.44)
355.49 Insertion Handle, For 10 mm–12 mm Universal Femoral Nails355.53 Threaded Conical Bolt, For 9 mm–12 mm Universal Femoral Nails355.57 Locking Nut, For 9 mm–12 mm Universal Femoral Nails
Fits Threaded Conical Bolt (355.53)
355.50 Insertion Handle, For 12 mm–16 mm Universal Femoral Nails355.54 Threaded Conical Bolt, For 13 mm–16 mm Universal Femoral Nails355.59 Locking Nut, For 17 mm–19 mm Universal Femoral Nails
Fits Threaded Conical Bolt (355.55)
355.51 Insertion Handle, For 16 mm–19 mm Universal Femoral Nails355.55 Threaded Conical Bolt, For 17 mm–19 mm Universal Femoral Nails355.59 Locking Nut, For 17 mm–19 mm Universal Femoral Nails
Fits Threaded Conical Bolt (355.55)
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-88IM Nai
lsIntramedullary Instruments
Large Quick Coupling
338.49 Large Quick Coupling ChuckFor use with Small Air Drill (511.10 or 511.11)
Pliers
359.224 Locking Plierslong
391.88 Locking Pliers, 180 mm lengthMaximum opening 34 mm dia.
Protection Sleeve Assemblies
312.46 4.5 mm/3.2 mm Double Drill SleeveFor 4.5 mm Cortex ScrewsAccepts 3.2 mm and 4.5 mm Drill Bits and Taps for 4.5 mm Cortex and 4.5 mm Shaft Screws
Illustrations not actual size
5/11
R
2-89IM
Nails
Intramedullary Instruments
Protection Sleeve Assemblies— continued
357.90 5.6 mm/2.8 mm Wire Sleeve, 150 mm lengthFor use with Miss-A-Nail Aiming Jig (357.92)
357.413 5.6 mm/3.2 mm Drill Guide198 mm
357.91 2.8 mm Trocar, 160 mm lengthFor use with Miss-A-Nail Aiming Jig (357.92)
03.010.038 10.0 mm Protection Sleeve
357.381 11.0 mm/3.2 mm Wire Guide222 mm
357.383 3.2 mm Trocar232 mm
03.025.040 11.0 mm/8.0 mm Protection Sleeve, 188 mmFor Angular Stable Locking System
357.82 8.0 mm/3.2 mm Wire Sleeve, 150 mm lengthFor use with Specialty Aiming Arm (357.80)
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-90IM Nai
lsIntramedullary Instruments
Protection Sleeve Assemblies— continued
357.386 11.0 mm/8.0 mm Protection Sleeve153 mm
357.387 4.0 mm Trocar176 mm
357.389 8.0 mm/4.0 mm Drill Sleeve164 mm
355.70 11.0 mm/8.0 mm Protection SleeveFor measuring bolt length and insertion of proximal locking bolts
355.72 8.0 mm/3.2 mm Drill Sleeve, 104 mmFor use with 11.0 mm/8.0 mm Protection Sleeve (355.70)
355.722 8.0 mm/3.2 mm Drill Sleeve, 110 mmFor use with 11.0 mm/8.0 mm Protection Sleeve (355.70)
357.711 8.0 mm/4.0 mm Drill Sleeve, 105 mmFor use with 11.0 mm/8.0 mm Protection Sleeve (355.70)
355.73 4.5 mm/3.2 mm Insert Drill SleeveFor use with 8.0 mm/4.5 mm Drill Sleeve (355.71)and 3.2 mm Drill Bits when two-stepdrilling procedure is used
355.71 8.0 mm/4.5 mm Drill SleeveFor use with 11.0 mm/8.0 mm Protection Sleeve (355.70) and 4.0 mm/4.5 mm Drill Bits, and for 4.5 mm Drill Bits when two-step drilling procedure is used
Illustrations not actual size
5/11
R
2-91IM
Nails
Intramedullary Instruments
Protection Sleeve Assemblies— continued
355.75 8.0 mm TrocarFor use with 11.0 mm/8.0 mm Protection Sleeve (355.70)
357.76 11.0 mm/8.0 mm Protection Sleeve, 138 mm length
357.71 8.0 mm/4.0 mm Drill Sleeve, 150 mm lengthFor use with 11.0 mm/8.0 mm Protection Sleeve (357.76)
357.097 8.0 mm/5.0 mm Drill SleeveFor use with 11.0 mm/8.0 mm Protection Sleeve (357.76)
357.75 4.0 mm Trocar, 162 mm lengthFor use with 8.0 mm/4.0 mm Drill Sleeve (357.71)
357.098 5.0 mm TrocarFor use with 8.0 mm/5.0 mm Drill Sleeve (357.097)
03.010.075 11.5 mm/8.5 mm Protection Sleevefor Recon Locking
03.010.076 8.5 mm/3.2 mm Wire Guidefor Recon Locking
03.010.077 3.2 mm Trocar for Recon Locking
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-92IM Nai
lsIntramedullary Instruments
Protection Sleeve Assemblies— continued
03.010.063 12.0 mm/8.0 mm Protection Sleeve188 mmFor Tibial and Femoral Nails-EX
03.010.064 8.0 m/3.2 mm Drill Sleeve200 mmFor Tibial Nail-EX
03.010.065 8.0 m/4.2 mm Drill Sleeve200 mmFor Tibial and Femoral Nails-EX
03.010.066 8.0 mm/ 5.0 mm Drill Sleeve200 mmFor Femoral Nails-EX
03.010.069 3.2 mm Trocar210 mmFor Tibial Nail-EX
03.010.070 4.2 mm Trocar210 mmFor Tibial and Femoral Nails-EX
03.010.071 5.0 mm Trocar210 mmFor Femoral Nails-EX
Illustrations not actual size
5/11
R
2-93IM
Nails
Intramedullary Instruments
Protection Sleeve Assemblies— continued
312.05 12.0 mm/8.5 mm Protection SleeveFor 7.3 mm Cannulated Screws
312.08 8.5 mm/2.8 mm Wire SleeveFor use with 12.0 mm/8.5 mm Protection Sleeve (312.05)For 7.3 mm Cannulated Screws
03.010.035 12.0 mm Protection SleeveFor Tibial Nail-EX
360.17 12.0 mm Drill SleeveFor Titanium Tibial Nails
03.010.030 13.0 mm Protection SleeveFor Retrograde/Antegrade Femoral Nails-EX
03.010.229 13.0 mm Protection Sleeve, short
03.010.031 13.0 mm/3.2 mm Wire Guide with Trocar Tip
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-94IM Nai
lsIntramedullary Instruments
Protection Sleeve Assemblies— continued
357.127 13.0 mm Protection Sleeve
357.128 13.0 mm/3.2 mm Trocar
358.688 14.0 mm/4.5 mm Drill Sleeve
358.694 4.5 mm/2.0 mm Wire Sleeve
358.686 2.0 mm Trocar
03.010.086 14.0 mm/8.0 mm Drill Sleeve
03.010.087 8.0 mm/2.0 mm Wire Guide
03.010.088 2.0 mm Trocar150 mm
Illustrations not actual size
5/11
R
2-95IM
Nails
Intramedullary Instruments
Protection Sleeve Assemblies— continued
03.010.081 15.0 mm/13.0 mm Protection SleeveFor Spiral Blade Aiming Arm For Retrograde Femoral Nails-EX
03.010.082 13.0 mm/3.2 mm Wire GuideFor Spiral Blade Aiming ArmFor Retrograde Femoral Nails-EX
351.28 15.5 mm/13 mm Protection Sleeve, 130 mm For use with 13 mm Cannulated Drill Bit (351.27) and Inserter for Titanium Spiral Blade (357.31)
351.23 13.0 mm/3.2 mm TrocarFor use with 15.5 mm/13 mm Protection Sleeve (351.28)
03.008.002 18.0 mm/ 8.0 mm Protection Sleeve, 188 mm
360.262 15.5 mm/13.5 mm Protection Sleeve360.246 17.5 mm/15.5 mm Protection Sleeve360.261 21.0 mm/18.0 mm Protection Sleeve
360.267 13.5 mm/3.2 mm Wire Guide360.248 18.0 mm/3.2 mm Wire Guide360.249 15.5 mm/3.2 mm Wire Guide
360.265 Handle for Protection Sleeves
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-96IM Nai
lsIntramedullary Instruments
Protection Sleeve Assemblies— continued
357.410 22.0 mm/17.0 mm Protection Sleeve
357.392 17.0 mm/3.2 mm Wire Guide161 mm
357.393 3.2 mm Trocar172 mm
Ratchet Grip
356.350 Ratchet Grip
Medullary Reamer Heads For use with 5.0 mm Flexible Shaft and 2.5 mm Reaming Rod
Diameter Diameter
352.085 8.5 mm (front cutting)352.090 9.0352.095 9.5352.100 10.0352.105 10.5352.110 11.0352.115 11.5352.120 12.0352.125 12.5352.130 13.0352.135 13.5
352.140 14.0 mm352.145 14.5352.150 15.0352.155 15.5352.160 16.0352.165 16.5352.170 17.0352.175 17.5352.180 18.0352.185 18.5352.190 19.0
Reamers
Illustrations not actual size
5/11
R
2-97IM
Nails
Intramedullary Instruments
Reamers— continued
351.783 Removal ToolFor Medullary Reamer Heads
Reamer Heads, sterileFor use with Reamer/Irrigator/Aspirator (RIA)
Diameter352.250S 12.0 mm352.251S 12.5352.252S 13.0352.253S 13.5352.254S 14.0352.255S 14.5352.256S 15.0352.257S 15.5352.258S 16.0352.259S 16.5352.261S 17.0352.262S 17.5352.263S 18.0352.264S 18.5352.265S 19.0
Flexible Medullary Reamers, flat wire, 385 mm length359.106 6.0 mm359.107 6.5 359.108 7.0 359.109 7.5 359.110 8.0 359.111 8.5 359.112 9.0 359.113 9.5 359.114 10.0 359.115 10.5
Front-Cutting Reamer Heads
Diameter
351.210 10.0 mm 351.310 10.5351.211 11.0351.311 11.5351.212 12.0351.213 13.0
Used with Flexible Shafts and Reaming Rods
351.313 13.5 mm351.214 14.0351.314 14.5351.215 15.0351.315 15.5351.216 16.0
Diameter
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-98IM Nai
lsIntramedullary Instruments
Reamers— continued
Hand Reamers
Diameter Length351.91 5.0 mm 450 mm351.92 6.0 450 351.93 7.0 450 351.94 8.0 450 351.95 9.0 450 351.96 10.0 450 351.97 11.0 450
Reaming and Guide Rods
2.5 mm Reaming Rods with ball tip, sterile351.709S 650 mm351.706S 950 351.708S 1150
351.707S 2.5 mm Reaming Rod with ball tip and extension950 mm, sterile
359.083 2.5 mm Calibrated Reaming Rod◊
850 mm
351.71◊ 3.0 mm Reaming Rod, 950 mm length, with offset ball tip
Reaming Rods351.76◊ 3.0 mm Reaming Rod, 950 mm length, with straight ball tip351.013◊ 3.0 mm Reaming Rod, 1250 mm length, with straight ball tip
◊Available nonsterile or sterile-packed. Add S to catalog number to order sterile product.
Illustrations not actual size
5/11
R
2-99IM
Nails
Intramedullary Instruments
Reaming and Guide Rods— continued
◊Available nonsterile or sterile-packed. Add S to catalog number to order sterile product.
355.042◊ 2.5 mm Guide Rod, 950 mm length, with smooth tipFor use with Titanium Cannulated Tibial Nails
355.041◊ 3.0 mm Guide Rod, with smooth tip, 950 mmFor insertion of cannulated nails
03.010.024 Holding DeviceFor Guide Wires and Reaming Rods
03.010.093 Reaming Rod Push Rod with Ball Handle
355.23 Guide Rod RetainerPrevents the guide rod from backing out of the nail and across the fracture line, losing reduction
355.006 Medullary TubePlastic tube used for changing from reaming rod to guide rod.The medullary tube is a single sterilization item that is to be discarded after one sterilization cycle.
Intramedullary Instruments
Reduction Tools
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-100IM Nai
ls
360.241 12.0 mm Tapered Intramedullary Reduction ToolConsists of Handle (360.243) and Shaft (360.244)
360.243 Handle for 12.0 mm Tapered Intramedullary Reduction Tool
360.244 Shaft for 12.0 mm Tapered Intramedullary Reduction Tool
360.251 7.5 mm Intramedullary Reduction Tool460 mm
352.050 7.0 mm Reduction HeadStraightFor use with 2.5 mm Reaming Rod with ball tip
352.055 7.0 mm Reduction HeadAngledFor use with 2.5 mm Reaming Rod with ball tip
Routers
332.06 RouterQuick coupling
332.062 Routerquick coupling, 130 mm
Illustrations not actual size
5/11
R
2-101IM
Nails
Intramedullary Instruments
Rulers
03.010.022 Radiographic RulerFor Cannulated Humeral Nails-EX
357.591 Radiographic RulerFor use with Solid Humeral Nail
03.010.021 Radiographic RulerFor Tibial Nail-EX
356.59 Radiographic RulerFor tibial nails
03.010.020 Radiographic RulerFor Femoral Nails-EX
357.391 Radiographic RulerFor Trochanteric Fixation Nail
Intramedullary Instruments
Rulers— continued
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-102IM Nai
ls
357.59 Radiographic RulerFor use with unreamed femoral nails
357.111 Radiographic Ruler for Titanium Distal Femoral Nails
03.008.001 Radiographic Rulerfor Titanium Cannulated Hindfoot Arthrodesis Nail—EX
356.55 Medullary Canal Length Gauge
For intraoperative determination of nail length
360.255 Reaming Rod Measuring Device
03.010.023 Radiographic Canal Width EstimatorFor IM nails
Illustrations not actual size
5/11
R
2-103IM
Nails
Intramedullary Instruments
Screwdrivers
314.115 StarDrive Screwdriver, T15, self-retaining
314.116 StarDrive Screwdriver Shaft, T15self-retaining, quick coupling
03.010.112 Holding Sleeve with Locking DeviceFor use with StarDrive Screwdriver,T25 (03.010.107 and 03.010.108)
03.010.108 StarDrive Screwdriver, T25self-retaining, long
StarDrive Screwdriver Shafts, T25self-retaining, quick coupling
314.119 165 mm
03.010.109 280 mm
T25 StarDrive/3.5 mm Hex Screwdriver03.010.150 self-retaining
T25 StarDrive/3.5 mm Hex Screwdriver Shafts03.010.151 self-retaining, quick coupling, 165 mm03.010.152 self-retaining, quick coupling, 280 mm
03.010.107 StarDrive Screwdriver, T25self-retaining
Intramedullary Instruments
Screwdrivers— continued
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-104IM Nai
ls
03.010.110 Cannulated StarDrive Screwdriver, T40self-retainingFor Tibial and Femoral Nails-EX
03.010.111 Cannulated StarDrive Screwdriver, T40with lever handle, self-retainingFor Lateral Entry Femoral Nail-EX
314.25 Hexagonal Screwdriver 2.5 mm width across flats
03.010.121 Large Hexagonal Screwdriver3.5 mm width across flats
314.27 Large Hexagonal Screwdriver3.5 mm width across flats
314.75 Hexagonal Screwdriver3.5 mm width across flats
Illustrations not actual size
5/11
R
2-105IM
Nails
Intramedullary Instruments
Screwdrivers— continued
314.26 Large Hexagonal Screwdriver, long3.5 mm width across flats
314.11 Holding Sleeve, for use with Hexagonal Screwdriver (314.25), Large Hexagonal Screwdriver (314.27), Cannulated Hexagonal Screwdriver (314.19)and Large Hexagonal Screwdrivers ( 314.26, 314.56 )
360.253 Holding Sleeve Locking Device
357.406 5.0 mm Flexible Hexagonal Screwdriver
357.415 5.0 mm Hexagonal Shaft210 mm
357.427 5.0 mm Hexagonal Screwdriver
357.417 5.0 mm Coated Flexible Hexagonal Screwdriver
Photo Not Available
Photo Not Available
Intramedullary Instruments
Screwdrivers— continued
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-106IM Nai
ls
03.010.092 Ball Hex Screwdriver, 8 mmFor Tibial and Femoral Nails-EX
357.515 Ball Hex Screwdriver, 8 mmFor insertion of cannulated nailsFor use with Insertion Handle (357.511)
357.398 Cannulated Shaft with 8 mm Hex125 mm
357.516 Cannulated Shaft, 8 mm HexFor use with Insertion Handle (357.511) andCannulated Connecting Screw (357.512) duringinsertion of cannulated nails
357.414 11.0 mm Hexagonal Shaft
Specialty Locking
357.369 Blade Guide Sleeve
357.371 Buttress/Compression NutFor 357.369
357.052 Trochanteric Fixation Nail Screw Compression Nut
Illustrations not actual size
5/11
R
2-107IM
Nails
Intramedullary Instruments
Specialty Locking— continued
357.374 Buttress/Compression Nut for over-insertionfor use with Blade Guide Sleeve (357.416)
357.416 Blade Guide Sleeve for over-insertion for use with Buttress/Compression Nut (357.374)
357.372 Helical Blade Inserter357.428 Trochanteric Fixation Nail Screw Inserter/Extractor
357.92 Miss-A-Nail Aiming Jig
357.94 5.6 mm/3.2 mm Wire Sleeve, 150 mm length For use with Miss-A-Nail Aiming Jig (357.92)
357.96 3.2 mm Trocar, 160 mm lengthFor use with 8.0 mm/3.2 mm Wire Sleeve (357.82)
357.97 Dummy NailFor use with Miss-A-Nail
358.696 Spiral Blade Inserter
357.377 Helical Blade Coupling ScrewFor use with Helical Blade Inserter (357.372) or Screw Inserter/Extractor (357.428)
Photo Not Available
Intramedullary Instruments
Specialty Locking— continued
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-108IM Nai
ls
358.697 Spiral Blade Connecting ScrewFor Titanium Humeral Nails
03.010.084 Spiral Blade InserterFor Retrograde Femoral Nails-EX
03.008.011 Spiral Blade InserterFor Hindfoot Arthrodesis Nail–EX
357.34 Connecting ScrewFor use with Inserter for Titanium Spiral Blades (357.31)and Spiral Blade Inserters (03.010.084 and 03.008.011)
357.31 InserterFor Titanium Spiral Blades
Illustrations not actual size
5/11
R
2-109IM
Nails
Intramedullary Instruments
SureLock
03.010.200 SureLock Aiming Arm,for Antegrade Femoral Nails
03.010.201 SureLock Connector, left,for Antegrade Femoral Nails
03.010.202 SureLock Connector, right,for Antegrade Femoral Nails
03.010.203 Adjustment Knob for SureLock,for Antegrade Femoral Nails
03.010.204 Calibration Pin, 12 mm diameter
Intramedullary Instruments
Tamps
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-110IM Nai
ls
Tamps356.303 12° Tamp356.302 30° Tamp356.301 50° Tamp
359.205 Standard Tamp
359.206 Beveled Tamp
Trephines
TrephinesFor use with Flexible Shaft (351.43)
356.308 8 mm Trephine356.310 10 mm Trephine356.312 12 mm Trephine
Tissue Protector
351.05 Tissue ProtectorFor use with IM Nails
Illustrations not actual size
5/11
R
2-111IM
Nails
Intramedullary Instruments
Universal Chucks
393.10 Universal Chuck with T-Handle
393.105 Small Universal Chuck with T-Handle
Wrenches
321.16 Combination Wrench11 mm width across flats
321.17 4.5 mm Pin Wrench
321.20 Ratchet Wrench11 mm width across flats
Intramedullary Instruments
Wrenches— continued
Illustrations not actual size
Instruments and implants approved by the AO Foundation 5/11
2-112IM Nai
ls
321.25 Spanner Wrench
321.21 Hexagonal Socket11 mm width across flatsFor use with Ratchet Wrench (321.20)
355.14 Cannulated Socket Wrench11 mm width across flats
Printed in U.S.A. 5/11 J4200-C
Synthes (USA)1302 Wrights Lane EastWest Chester, PA 19380Telephone: (610) 719-5000To order: (800) 523-0322Fax: (610) 251-9056
© 2011 Synthes, Inc. or its affiliates. All rights reserved.
www.synthes.com