Upload
vinrav
View
125
Download
7
Tags:
Embed Size (px)
Citation preview
Product Catalogue
2010 Pricing(Rev. 03/19/10)
Phone: 279-7789Fax: 279-2816
Hours of OperationMon - Thurs 7:30 to 5:00Friday 7:30 to 4:00
11580 40 Street SE, Calgary, Alberta, T2Z 4V6
www.multiwood.com
1 In t roduct ion
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
To Provide High Quality Products at Competitive Prices with On-Time Deliveries, While Striving to Provide a Safe and Friendly Work Environment
______________
Alder Clear or Knotty................... 20%Beech......................................... 40%Cherry......................................... 54%Hickory........................................ 20%Knotty Pine.................................. Base Price
**May not be available in plywood panel doors (ie: MW1, MW2, MN1, MS1, etc).
______________
Maple (Brown)........................... 2%Maple (White Hard)................... 35%Maple Paint Grade MDF Panel.. 2%African Mahogony**................. 50%Walnut....................................... 65%
Rift Cut (Vertical Grain) Fir...........40%Rift Cut Red Oak**..................... 70%Rift Cut White Oak**................... 70%QTR Sawn African Rosewood**.. 75%QTR Sawn Red Oak**................. 70%QTR Sawn White Oak**...............70%
Products
Cabinet Doors - We produce a wide range of solid wood cabinet doors (standard and mitered, MDF routered doors and slab-plywooddoors). Applied mouldings are available for many of our doors as well.
Passage Doors - We produce high end interior solid wood and MDF passage doors to your specifications.
Mouldings - We produce hard wood mouldings in all domestic wood types and some exotic species. We stock hard wood mouldings in oak, maple, cherry, poplar, alder, knotty alder, and beech. We make custom MDF mouldings to your specifications.
Kitchen Components - We produce and stock 5/8” melamine kitchen components in white and hard rock melamine. Our system isdesigned to be as flexible as possible for the contractor who can design and install custom kitchens.
Hardware - We stock cabinet door European hinges, drawer slides (accuride and blumotion), and a variety of items for basic assembly.
Hardwood Flooring - We sell a wide range of prefinished hardwood flooring, installation available if required.
Custom Machining - We specialise in high production, including CNC routing and drilling, sheet goods cut to size, planing solid lumber,straight line ripping, laminating, sanding and custom mouldings. We also welcome custom design orders or other wood types. Wefeature fast turn-around times. Please inquire.
Pricing
We have provided pricing for selected sizes and styles of oak doors for reference purposes only. Customers are encouraged to contactour order desk for a written quote. Catalogue prices are subject to change without notice. Quoted prices will be honored for 30 days.
Wood Factors (upcharge by wood type)
Payment Terms
We accept cash, debit card, VISA, MasterCard or Company Cheque (must be personalized with company name, address and phone number). Cheques that are returned NSF will be subject to a service charge of $25.00. All cash sale orders require a minimum 50%deposit prior to the order being sent to production. Balance is payable on completion.
Order Changes & Cancellations
There will be a minimum $35.00 revision/cancellation charge, or the following charges will be applied: 33% of item price after the first day, 66% of item price after the second day, 100% item price after the third day.
Delivery Service
We offer delivery within the city of Calgary and to outlying communities including Okotoks, Cochrane, Airdrie and Chestermere Lake.
Mission Statement
Established in 1985
Wood Specifications
Multiwood is proud to produce fine products from a wide variety of wood species. Red oak, maple, pine, cherry, alder, walnut and hickory are some of the many species we work with. The characteristics of each species are unique, and equally as unique is each tree. Due to genetic differences, soil, moisture and weather, the wood we get in any one species varies widely. These natural variations - “God's Fingerprints” - give wood the beauty that we have learned to appreciate. It is impossible to guarantee that all pieces used will have uniform colour, and be free of these natural marks. Knotty wood is available in most species. Please Inquire!
Alder Alder is separated into clear and knotty alder
Clear Alder Sound pin knots up to 1/8” may appear on the face of the door, and up to 3/16” on the back. Colour Streaks up to 1/4” by 2” are acceptable on the face of the door, and the back.
Knotty Alder Sound knots of any size are acceptable, and see through holes in knots are allowed, if they are small. Color Streaks are acceptable, if there are no cracks or splits in the streak and it is sound. No pitch pockets are acceptable.Note: Some panels may have limited or no knots due to the nature of the wood. Whether a door is “too knotty” or “not knotty enough” is subjective, and cannot be warranted for replacement.
Cherry American Black Cherry is used for all of our cherry products. (the wood is named for the colour of the berry). The heartwood is colour matched and a reasonable grain match is made. The natural characteristics of cherry include mineral streaks, gum pockets, figured grain and pin knots. Pin knots up to 1/8” may be found on the face for the doors and up to 3/16” on the back. Mineral streaks and gum pockets may be found up to 1/8” by 2 ½” long on the face of the door, gum pockets of any size and quantity may be found on the back of the door, as long as there are no cracks or splits in the streak. Sap can be included in the face on request, and may be present on the back as long as it is sound.
Hickory Northern True Hickory is used for all our hickory products. Heartwood and sapwood is always mixed in various degrees. This results in extreme colour and grain variation which give it a rustic look. Sound pin knots up to 1/8” may appear on the face of the door, and up to 3/16” on the back.
Knotty Pine Eastern White Pine, or Furniture Pine, is used for our pine products. It is the preferred pine; due to its low pitch content. The doors will have knots in the panels but may, or may not have knots in the stiles and rails. Knots may extend to an edge of the stile and rail, but not the entire piece, and can be as large as 3” in diameter. Cracks in knots that penetrate the thickness of the doorare allowed. Pitch and mineral streaks up to ½” wide by 6” long may be found on the face of the door. Note: Some panels may have limited or no knots due to the nature of the wood. Whether a door is “too knotty” or “NOT knotty enough” is subjective, and cannot be warranted for replacement.
Maple Sugar Maple, also known as White Hard Maple is used for all our maple products. We separate our maple products into two categories: Maple, and Brown Maple. This is based on a combination of colour and natural defects.
Maple will be all white wood face. Mineral streaks 1/8” by 3/4” long may occur on the face of the door and 1/4” by 3” on the back. Some Brown or sugar tracks (heartwood) may occur on the back of the door. Sound pin knots up to 1/8” may appear on the face of the door, and up to 3/16” on the back. Some color streaks of 1/8” by 2/4” are acceptable on the face, and some brown or light green color streaks are acceptable on the back.
Brown maple will include heartwood and any natural defects, and miscellaneous sound defects, in any quantity and size. Brown and dark streaks may occur on face and back in any size and shape.
Red Oak Northern red oak is used for all our oak products. It is the most colour consistent of all red oak. We will make a reasonable colour and grain match. Colour variations are considered normal. Excessive mineral streaks are not allowed. Mineral streaks up to 1/8” by 2” may be found on the face of the doors and on the backs. Sound pin knots up to 1/8” may appear on the face of the door, and up to 3/16” on the back. Sapwood up to 1” is acceptable on the back of the door, as long as it does not show through the face.
Walnut Sound pin knots up to 1/8” may appear on the face of the door, and up to 3/16” on the back. Sapwood up to a width of 1” is acceptable on the back of the door, as long as it does not show through the face.
Our doors are sold unfinished and should not be left any length of time before finishing. Color changes will occur when wood is exposed to light and air. Finishing will slow down the process but changes in color will still occur. Unfinished wood can change color rapidly especially in the case of cherry. It is recommended that cherry be kept covered until you are ready to finish. Care should be taken when storing doors prior to finishing, or installation. Avoid Extreme Cold, Heat and Humidity
Wood Specifications2
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
Standard Shapes3
All frames are optionally available with groove and vinyl insert for easy installation of 3mm thick glass (see page 15). This option is available free of charge in either white or brown. When ordering frame doors please include door style and frame number: ie: MW3 F8
Standard: Frames available in all shapes including Cathedral and Eyebrow
MDF: Frames available in all shapes including Cathedral and Eyebrow
Miter: Open frame for all. Mullions in MN, MT, MX and MR only.
Cathedral Half Cathedral-L Half Cathedral-R Eyebrow Half Eyebrow-L Half Eyebrow-R
Double Cathedral
Double Eyebrow
Eyebrow Side By Side- Recommended from 28”
or wider
Square
Cathedral Side By Side- Recommended from
28” or wider
All Mitered Doors This Shape Only
F F4 F6 F9F8
French Frames
Square Side By Side- Recommended from
28” or wider
Double Panel with Cathedral top
Double Panel Side by Side with F4 Frames
Triple Panel with Eyebrow F4 Frame Top
Triple Panel Side by Side with Cathedral Top
Quadruple Panel 1A2 (1 Panel Above 2) 2A1(2 Panels Above 1)
Wainscoting - Advise the number of panels required. Individual
panels should be no wider than 24 inches. Overall width should be maximum 108 inches, anything
over this requires a special quote
Double panel and triple panel doors are recommended to prevent warpage on larger doors. Doors 42" or higher should have a double panel, doors 62" or higher should have a triple panel. Doors over 26" wide should have side by side double panels.
Recommendedover 42” high
Recommended over 62” high
Recommended over 80” high
Please note - These are only examples, as there are many combinations of
Double, Triple, Quadruple Panel and Side by Side Doors available by
selecting different shape and frame options. Also, the location of middle rails can vary according to your preference. Not available in the Miter Door style.
**No warranty for doors over 50” high or 28” wide.
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
Shaker Stile/Rail with Optional Panels For Doors
Standard Solid Wood Doors
DFB - Drawer Front Blank 2 1/4” Stile with 1 1/2” Rail(Codes Starting with “D”)
2 1/4” Stile & Rail(All Codes With Suffix “HG”)
Slab Reduced Rail Full Size Rail
Drawer Front Opt ions
Ply Panel
Cove Panel
Multiwood Panel
Pearl Panel
Bevel Panel
Soft Panel
Reversed Panel
Beaded Panel
V-Grooved Panel
See Page 18 for Outside Edge Profile Options
Codes with suffix “VP”
Codes with suffix “BP”
Codes with Suffix “F”See Page 3 for Frame Options
Shaker Stile/Rail
4
CODES MINIMUM SIZES
MS1 F Square, Full Drawer 127mm 5 140mm 5 1/2
MS2 F Cathedral & Half 127mm 5 180mm 7 1/16
MS8 F Eyebrow & Half 127mm 5 189mm 7 7/16
DS1 F Reduced Rail Drawer 89mm 3 1/2 140mm 5 1/2
WidthHeight
CODES MINIMUM SIZES
MS1, MS1 HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2
MS2, MS5L, MS5R Cathedral & Half 172mm 6 3/4 180mm 7 1/16
MS8, MS7L, MS7R Eyebrow & Half 156mm 6 1/8 189mm 7 7/16
DS1 Reduced Rail Drawer 92mm 3 5/8 140mm 5 1/2
WidthHeight
CODES MINIMUM SIZES
MSC3, MSC3 HG Square, Full Drawer 169mm 6 5/8 169mm 6 5/8
MSC4, MSC6L, MSC6R Cathedral & Half 210mm 8 1/4 180mm 7 1/16
MSC9, MSC10L, MSC10R Eyebrow & Half 194mm 7 5/8 189mm 7 7/16
DSC Reduced Rail Drawer 131mm 5 1/8 169mm 6 5/8
WidthHeight
CODES MINIMUM SIZES
MS3, MS3 HG Square, Full Drawer 164mm 6 7/16 164mm 6 7/16
MS4, MS6L, MS6R Cathedral & Half 205mm 8 1/16 180mm 7 1/16
MS9, MS10L, MS10R Eyebrow & Half 189mm 7 7/16 189mm 7 7/16
DS3 Reduced Rail Drawer 126mm 4 15/16 164mm 6 7/16
WidthHeight
CODES MINIMUM SIZES
MSP3, MSP3 HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16
MSP4, MSP6L, MSP6R Cathedral & Half 222mm 8 11/16 183mm 7 3/16
MSP9, MSP10L, MSP10R Eyebrow & Half 209mm 8 3/16 189mm 7 7/16
DSP Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16
WidthHeight
CODES MINIMUM SIZES
MSB, MSB HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16
Not Available Cathedral & Half ─ ─ ─ ─
Not Available Eyebrow & Half ─ ─ ─ ─
DSB Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16
WidthHeight
CODES MINIMUM SIZES
MSS, MSS HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16
MSS4, MSS6L, MSS6R Cathedral & Half 224mm 8 13/16 196mm 7 11/16
MSS9, MSS10L, MSS10R Eyebrow & Half 209mm 8 3/16 189mm 7 7/16
DSS Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16
WidthHeight
BP and VP CODES MINIMUM SIZES
MSR, MSR HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2
MSR4, MSR6L, MSR6R Cathedral & Half 172mm 6 3/4 180mm 7 1/16
MSR9, MSR10L, MSR10R Eyebrow & Half 156mm 6 1/8 189mm 7 7/16
DSR VGBP, DSR VGVP DSR Reduced Rail Drawer 92mm 3 5/8 140mm 5 1/2
Width
For This Option add
Suffix "BP" or "VP" to
Codes Directly to Right
Height
Shaker Stile/Rail
Shaker Stile/Rail
Shaker Stile/Rail
Shaker Stile/Rail
Shaker Stile/Rail
Shaker Stile/Rail
Shaker Stile/Rail
Shaker Stile/Rail
Shaker Stile/Rail
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
Standard Solid Wood Doors
Ply Panel
Cove Panel
Multiwood Panel
Pearl Panel
Bevel Panel
Soft Panel
Reversed Panel
Beaded Panel
V-Grooved Panel
Cove Stile/Rail with Optional Panels For Doors See Page 18 for Outside Edge Profile Options
5
CODES MINIMUM SIZES
MW1 F Square, Full Drawer 127mm 5 140mm 5 1/2
MW2 F Cathedral & Half 127mm 5 180mm 7 1/16
MW8 F Eyebrow & Half 127mm 5 189mm 7 7/16
DF1 F Reduced Rail Drawer 89mm 3 1/2 140mm 5 1/2
Height Width
CODES MINIMUM SIZES
MW1, MW1 HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2
MW2, MW5R, MW5L Cathedral & Half 172mm 6 3/4 180mm 7 1/16
MW8, MW7L, MW7R Eyebrow & Half 156mm 6 1/8 189mm 7 7/16
DF1 Reduced Rail Drawer 92mm 3 5/8 140mm 5 1/2
Height Width
CODES MINIMUM SIZES
MC3, MC3 HG Square, Full Drawer 169mm 6 5/8 169mm 6 5/8
MC4, MC6L, MC6R Cathedral & Half 210mm 8 1/4 180mm 7 1/16
MC9, MC10L, MC10R Eyebrow & Half 194mm 7 5/8 189mm 7 7/16
DC3 Reduced Rail Drawer 131mm 5 1/8 169mm 6 5/8
Height Width
CODES MINIMUM SIZES
MW3, MW3 HG Square, Full Drawer 164mm 6 7/16 164mm 6 7/16
MW4, MW6L, MW6R Cathedral & Half 205mm 8 1/16 180mm 7 1/16
MW9, MW10L, MW10R Eyebrow & Half 189mm 7 7/16 189mm 7 7/16
DF3 Reduced Rail Drawer 126mm 4 15/16 164mm 6 7/16
Height Width
CODES MINIMUM SIZES
MP3, MP3 HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16
MP4, MP6L, MP6R Cathedral & Half 224mm 8 13/16 183mm 7 3/16
MP9, MP10L, MP10R Eyebrow & Half 209mm 8 3/16 189mm 7 7/16
DP3 Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16
Height Width
CODES MINIMUM SIZES
MB3, MB3 HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16
Not Available Cathedral & Half ─ ─ ─ ─
Not Available Eyebrow & Half ─ ─ ─ ─
DB3 Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16
Height Width
CODES MINIMUM SIZES
MWS, MWS HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16
MWS4, MWS6L, MWS6R Cathedral & Half 224mm 8 13/16 183mm 7 3/16
MWS9, MWS10L, MSW10R Eyebrow & Half 209mm 8 3/16 189mm 7 7/16
DFS Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16
Height Width
BP and VP CODES MINIMUM SIZES
MWR, MWR HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2
MWR4, MWR6L, MWR6R Cathedral & Half 172mm 6 3/4 180mm 7 1/16
MWR9, MWR10L, MWR10R Eyebrow & Half 156mm 6 1/8 189mm 7 7/16
DFR VGBP, DFR VGVP DFR Reduced Rail Drawer 92mm 3 5/8 140mm 5 1/2
For This Option add
Suffix "BP" or "VP" to
Codes Directly to Right
Height Width
Codes with Suffix “F”See Page 3 for Frame Options
Cove Stile/Rail
DFB - Drawer Front Blank 2 1/4” Stile with 1 1/2” Rail(Codes Starting with “D”)
2 1/4” Stile & Rail(All Codes With Suffix “HG”)
Slab Reduced Rail Full Size Rail
Drawer Front Opt ions
Cove Stile/Rail
Cove Stile/Rail
Cove Stile/Rail
Cove Stile/Rail
Cove Stile/Rail
Cove Stile/Rail
Cove Stile/Rail
Cove Stile/Rail
Cove Stile/Rail
Codes with suffix “BP”
Codes with suffix “VP”
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
Standard Solid Wood Doors
Ogee Stile/Rail with Optional Panels For Doors
Ply Panel
Cove Panel
Multiwood Panel
Pearl Panel
Bevel Panel
Soft Panel
Reversed Panel
Beaded Panel
V-Grooved Panel
6
See Page 18 for Outside Edge Profile Options
CODES MINIMUM SIZES
OW1 F Square, Full Drawer 127mm 5 140mm 5 1/2
OW2 F Cathedral & Half 127mm 5 194mm 7 5/8
OW8 F Eyebrow & Half 156mm 199mm 7 13/16
EF1 F Reduced Rail Drawer 89mm 3 1/2 140mm 5 1/2
Height Width
CODES MINIMUM SIZES
OW1, OW1 HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2
OW2, OW5L, OW5R Cathedral & Half 172mm 6 3/4 194mm 7 5/8
OW8, OW7L, OW7R Eyebrow & Half 156mm 6 1/8 199mm 7 13/16
EF1 Reduced Rail Drawer 92mm 3 5/8 140mm 5 1/2
Height Width
CODES MINIMUM SIZES
OC3, OC3 HG Square, Full Drawer 169mm 6 5/8 169mm 6 5/8
OC4, OC6L, OC6R Cathedral & Half 210mm 8 1/4 194mm 7 5/8
OC9, OC10L, OC10R Eyebrow & Half 194mm 7 5/8 199mm 7 13/16
EC3 Reduced Rail Drawer 131mm 5 1/8 169mm 6 5/8
Height Width
CODES MINIMUM SIZES
OW3, OW3 HG Square, Full Drawer 164mm 6 7/16 164mm 6 7/16
OW4, OW6L, OW6R Cathedral & Half 205mm 8 1/16 194mm 7 5/8
OW9, OW10L, OW10R Eyebrow & Half 189mm 7 7/16 199mm 7 13/16
EF3 Reduced Rail Drawer 126mm 4 15/16 164mm 6 7/16
Height Width
CODES MINIMUM SIZES
OP3, OP3 HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16
OP4, OP6L, OP6R Cathedral & Half 224mm 8 13/16 194mm 7 5/8
OP9, OP10L. OP10R Eyebrow & Half 209mm 8 3/16 199mm 7 13/16
EP3 Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16
Height Width
CODES MINIMUM SIZES
OB3, OB3 HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16
Not Available Cathedral & Half ─ ─ ─ ─
Not Available Eyebrow & Half ─ ─ ─ ─
EB3 Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16
Height Width
CODES MINIMUM SIZES
OWS, OWS HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16
OS4, OS6L, OS6R Cathedral & Half 224mm 8 13/16 194mm 7 5/8
OS9, OS10L, OS10R Eyebrow & Half 209mm 8 3/16 199mm 7 13/16
EFS Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16
Height Width
BP and VP CODES MINIMUM SIZES
OWR, OWR HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2
OR4, OR6L, OR6R Cathedral & Half 172mm 6 3/4 194mm 7 5/8
OR9, OR10L, OR10R Eyebrow & Half 156mm 6 1/8 199mm 7 13/16
EFR VGBP, EFR VGVP EFR Reduced Rail Drawer 92mm 3 5/8 140mm 5 1/2
For This Option add
Suffix "BP" or "VP" to
Codes Directly to Right
Height Width
Codes with Suffix “F”See Page 3 for Frame Options
Ogee Stile/Rail
DFB - Drawer Front Blank 2 1/4” Stile with 1 1/2” Rail(Codes Starting with “E”)
2 1/4” Stile & Rail(All Codes With Suffix “HG”)
Slab Reduced Rail Full Size Rail
Drawer Front Opt ionsCodes with suffix “BP”
Codes with suffix “VP”
Ogee Stile/Rail
Ogee Stile/Rail
Ogee Stile/Rail
Ogee Stile/Rail
Ogee Stile/Rail
Ogee Stile/Rail
Ogee Stile/Rail
Ogee Stile/Rail
Ogee Stile/Rail
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
6 1/8
Standard Solid Wood Doors
Pillow Stile/Rail with Optional Panels For Doors
Ply Panel
Cove Panel
Multiwood Panel
Pearl Panel
Bevel Panel
Soft Panel
Reversed Panel
Beaded Panel
V-Grooved Panel
7
See Page 18 for Outside Edge Profile Options
CODES MINIMUM SIZES
AW1 F Square, Full Drawer 127mm 5 140mm 5 1/2
AW2 F Cathedral & Half 127mm 5 194mm 7 5/8
AW8 F Eyebrow & Half 156mm 6 1/8 199mm 7 13/16
BF1 F Reduced Rail Drawer 89mm 3 1/2 140mm 5 1/2
Height Width
CODES MINIMUM SIZES
AW1, AW1 HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2
AW2, AW5L, AW5R Cathedral & Half 172mm 6 3/4 194mm 7 5/8
AW8, AW7L, AW7R Eyebrow & Half 156mm 6 1/8 199mm 7 13/16
BF1 Reduced Rail Drawer 92mm 3 5/8 140mm 5 1/2
Height Width
CODES MINIMUM SIZES
AC3 AC3 HG Square, Full Drawer 169mm 6 5/8 169mm 6 5/8
AC4, AC6L, AC6R Cathedral & Half 210mm 8 1/4 194mm 7 5/8
AC9, AC10L, AC10R Eyebrow & Half 194mm 7 5/8 199mm 7 13/16
BC3 Reduced Rail Drawer 131mm 5 1/8 169mm 6 5/8
Height Width
CODES MINIMUM SIZES
AW3, AW3 HG Square, Full Drawer 164mm 6 7/16 164mm 6 7/16
AW4, AW6L, AW6R Cathedral & Half 205mm 8 1/16 194mm 7 5/8
AW9, AW10L, AW10R Eyebrow & Half 189mm 7 7/16 199mm 7 13/16
BF3 Reduced Rail Drawer 126mm 4 15/16 164mm 6 7/16
Height Width
CODES MINIMUM SIZES
AP3, AP3 HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16
AP4, AP6L, AP6R Cathedral & Half 224mm 8 13/16 194mm 7 5/8
AP9, AP10L, AP10R Eyebrow & Half 209mm 8 3/16 199mm 7 13/16
BP3 Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16
Height Width
CODES MINIMUM SIZES
AB3, AB3 HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16
Not Available Cathedral & Half ─ ─ ─ ─
Not Available Eyebrow & Half ─ ─ ─ ─
BB3 Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16
Height Width
CODES MINIMUM SIZES
AS3 AS3 HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16
AS4, AS6L, AS6R Cathedral & Half 224mm 8 13/16 194mm 7 5/8
AS9, AS10L, AS10R Eyebrow & Half 209mm 8 3/16 199mm 7 13/16
BFS Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16
Height Width
BP and VP CODES MINIMUM SIZES
AR3, AR3 HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2
AR4, AR6L, AR6R Cathedral & Half 172mm 6 3/4 194mm 7 5/8
AR9, AR10L, AR10R Eyebrow & Half 156mm 6 1/8 199mm 7 13/16
BFR VGBP, BFR VGVP BFR Reduced Rail Drawer 92mm 3 5/8 140mm 5 1/2
For This Option add
Suffix "BP" or "VP" to
Codes Directly to Right
Height Width
Codes with Suffix “F”See Page 3 for Frame Options
Pillow Stile/Rail
DFB - Drawer Front Blank 2 1/4” Stile with 1 1/2” Rail(Codes Starting with “B”)
2 1/4” Stile & Rail(All Codes With Suffix “HG”)
Slab Reduced Rail Full Size Rail
Drawer Front Opt ionsCodes with suffix “BP”
Codes with suffix “VP”
Pillow Stile/Rail
Pillow Stile/Rail
Pillow Stile/Rail
Pillow Stile/Rail
Pillow Stile/Rail
Pillow Stile/Rail
Pillow Stile/Rail
Pillow Stile/Rail
Pillow Stile/Rail
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
Standard Solid Wood Doors
V-Groove Through Stile/Rail with Optional Panels For Doors
V-Groove Through Stile/Rail
Ply Panel
Cove Panel
Soft Panel
Beaded Panel
V-Grooved Panel
Bevel Panel
Multiwood Panel
Pearl Panel
Reversed Panel
8
See Page 18 for Outside Edge Profile Options
CODES MINIMUM SIZES
VS1 F Square, Full Drawer 127mm 5 140mm 5 1/2
VS2 F Cathedral & Half 127mm 5 180mm 7 1/16
VS8 F Eyebrow & Half 127mm 5 189mm 7 7/16
VF1 F Reduced Rail Drawer 89mm 3 1/2 140mm 5 1/2
Height Width
CODES MINIMUM SIZES
VS1, VS1 HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2
VS2, VS5L, VS5R Cathedral & Half 172mm 6 3/4 180mm 7 1/16
VS8, VS7L, VS7R Eyebrow & Half 156mm 6 1/8 189mm 7 7/16
VF1 Reduced Rail Drawer 89mm 3 1/2 140mm 5 1/2
Height Width
CODES MINIMUM SIZES
VSC, VSC HG Square, Full Drawer 169mm 6 5/8 169mm 6 5/8
VSC4, VSC6L, VSC6R Cathedral & Half 210mm 8 1/4 180mm 7 1/16
VSC9, VSC10L, VSC10R Eyebrow & Half 194mm 7 5/8 189mm 7 7/16
VFC Reduced Rail Drawer 131mm 5 1/8 169mm 6 5/8
Height Width
CODES MINIMUM SIZES
VS3, VS3 HG Square, Full Drawer 164mm 6 7/16 164mm 6 7/16
VS4, VS6L, VS6R Cathedral & Half 205mm 8 1/16 189mm 7 7/16
VS9, VS10L, VS10R Eyebrow & Half 189mm 7 7/16 189mm 7 7/16
VF3 Reduced Rail Drawer 126mm 4 15/16 164mm 6 7/16
Height Width
CODES MINIMUM SIZES
VSP, VSP HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16
VSP4, VSP6L, VSP6R Cathedral & Half 224mm 8 13/16 183mm 7 3/16
VSP9, VSP10L, VSP10R Eyebrow & Half 209mm 8 3/16 196mm 7 11/16
VFP Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16
Height Width
CODES MINIMUM SIZES
VSB, VSB HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16
Not Available Cathedral & Half ─ ─ ─ ─
Not Available Eyebrow & Half ─ ─ ─ ─
VFB Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16
Height Width
CODES MINIMUM SIZES
VSS, VSS HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16
VSS4, VSS6L, VSS6R Cathedral & Half 224mm 8 13/16 183mm 7 3/16
VSS9, VSS10L, VSS10R Eyebrow & Half 209mm 8 3/16 189mm 7 7/16
VFS Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16
Height Width
BP and VP CODES MINIMUM SIZES
VSR, VSR HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2
VSR4, VSR6L, VSR6R Cathedral & Half 172mm 6 3/4 180mm 7 1/16
VSR9, VSR10L, VSR10R Eyebrow & Half 156mm 6 1/8 189mm 7 7/16
VFR VGBP, VFR VGVP VFR Reduced Rail Drawer 92mm 3 5/8 140mm 5 1/2
For This Option add
Suffix "BP" or "VP" to
Codes Directly to Right
Height Width
Codes with Suffix “F”See Page 3 for Frame Options
DFB - Drawer Front Blank 2 1/4” Stile with 1 1/2” Rail 2 1/4” Stile & Rail(All Codes With Suffix “HG”)
Slab Reduced Rail Full Size Rail
Drawer Front Opt ionsCodes with suffix “BP”
Codes with suffix “VP”
V-Groove Through Stile/Rail
V-Groove Through Stile/Rail
V-Groove Through Stile/Rail
V-Groove Through Stile/Rail
V-Groove Through Stile/Rail
V-Groove Through Stile/Rail
V-Groove Through Stile/Rail
V-Groove Through Stile/Rail
V-Groove Through Stile/Rail
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
Standard Solid Wood Doors
Bevel Shaker Stile/Rail with Optional Panels For Doors
9
See Page 18 for Outside Edge Profile Options
Bevel Shaker Stile/Rail
Ply Panel
Cove Panel
Multiwood Panel
Pearl Panel
Soft Panel
Bevel Panel
Reversed Panel
V-Grooved Panel
Beaded Panel
CODES MINIMUM SIZES
KS1 F Square, Full Drawer 127mm 5 140mm 5 1/2
Not Available Cathedral & Half ─ ─ ─ ─
Not Available Eyebrow & Half ─ ─ ─ ─
KF1 F Reduced Rail Drawer 89mm 3 1/2 140mm 5 1/2
Height Width
CODES MINIMUM SIZES
KS1, KS1 HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2
Not Available Cathedral & Half ─ ─ ─ ─
Not Available Eyebrow & Half ─ ─ ─ ─
KF1 Reduced Rail Drawer 92mm 3 5/8 140mm 5 1/2
Height Width
CODES MINIMUM SIZES
KSC, KSC HG Square, Full Drawer 169mm 6 5/8 169mm 6 5/8
Not Available Cathedral & Half ─ ─ ─ ─
Not Available Eyebrow & Half ─ ─ ─ ─
KFC Reduced Rail Drawer 131mm 5 1/8 169mm 6 5/8
Height Width
CODES MINIMUM SIZES
KS3, KS3 HG Square, Full Drawer 164mm 6 7/16 164mm 6 7/16
Not Available Cathedral & Half ─ ─ ─ ─
Not Available Eyebrow & Half ─ ─ ─ ─
KF3 Reduced Rail Drawer 126mm 4 15/16 164mm 6 7/16
Height Width
CODES MINIMUM SIZES
KSP, KSP HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16
Not Available Cathedral & Half ─ ─ ─ ─
Not Available Eyebrow & Half ─ ─ ─ ─
KFP Reduced Rail Drawer 158mm 5 11/16 158mm 7 3/16
Height Width
CODES MINIMUM SIZES
KSB, KSB HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16
Not Available Cathedral & Half ─ ─ ─ ─
Not Available Eyebrow & Half ─ ─ ─ ─
KFB Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16
Height Width
CODES MINIMUM SIZES
KSS, KSS HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16
Not Available Cathedral & Half ─ ─ ─ ─
Not Available Eyebrow & Half ─ ─ ─ ─
KFS Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16
Height Width
BP and VP CODES MINIMUM SIZES
KSR, KSR HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2
Not Available Cathedral & Half ─ ─ ─ ─
Not Available Eyebrow & Half ─ ─ ─ ─
KFR VGBP, KFR VGVP KFR Reduced Rail Drawer 92mm 3 5/8 140mm 5 1/2
For This Option add
Suffix "BP" or "VP" to
Codes Directly to Right
Height Width
Codes with Suffix “F”See Page 3 for Frame Options
DFB - Drawer Front Blank 2 1/4” Stile with 1 1/2” Rail 2 1/4” Stile & Rail(All Codes With Suffix “HG”)
Slab Reduced Rail Full Size Rail
Drawer Front Opt ionsCodes with suffix “BP”
Codes with suffix “VP”
Bevel Shaker Stile/Rail
Bevel Shaker Stile/Rail
Bevel Shaker Stile/Rail
Bevel Shaker Stile/Rail
Bevel Shaker Stile/Rail
Bevel Shaker Stile/Rail
Bevel Shaker Stile/Rail
Bevel Shaker Stile/Rail
Bevel Shaker Stile/Rail
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
Standard Solid Wood Doors
Lip Stile/Rail with Optional Panels For Doors
10
CODES MINIMUM SIZES
LS1 F Square, Full Drawer 127mm 5 140mm 5 1/2
LS2 F Cathedral & Half 127mm 5 180mm 7 1/16
LS8 F Eyebrow & Half 127mm 5 189mm 7 7/16
LF1 F Reduced Rail Drawer 89mm 3 1/2 140mm 5 1/2
Height Width
CODES MINIMUM SIZES
LS1, LS1 HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2
LS2, LS5L, LS5R Cathedral & Half 172mm 6 3/4 180mm 7 1/16
LS8, LS7L, LS7R Eyebrow & Half 156mm 6 1/8 189mm 7 7/16
LF1 Reduced Rail Drawer 89mm 3 1/2 140mm 5 1/2
Height Width
CODES MINIMUM SIZES
LSC, LSC HG Square, Full Drawer 169mm 6 5/8 169mm 6 5/8
LSC4, LSC6L, LSC6R Cathedral & Half 210mm 8 1/4 180mm 7 1/16
LSC9, LSC10L, LSC10R Eyebrow & Half 194mm 7 5/8 189mm 7 7/16
LFC Reduced Rail Drawer 131mm 5 1/8 169mm 6 5/8
Height Width
CODES MINIMUM SIZES
Ls3, LS3 HG Square, Full Drawer 164mm 6 7/16 164mm 6 7/16
LS4, LS6L, LS6R Cathedral & Half 205mm 8 1/16 189mm 7 7/16
LS9, LS10L, LS10R Eyebrow & Half 189mm 7 7/16 189mm 7 7/16
LF3 Reduced Rail Drawer 126mm 4 15/16 164mm 6 7/16
Height Width
CODES MINIMUM SIZES
LSP, LSP HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16
LSP4, LSP6L, LSP6R Cathedral & Half 224mm 8 13/16 183mm 7 3/16
LSP9, LSP10L, LSP10R Eyebrow & Half 209mm 8 3/16 196mm 7 11/16
LFP Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16
Height Width
CODES MINIMUM SIZES
LSB, LSB HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16
Not Available Cathedral & Half ─ ─ ─ ─
Not Available Eyebrow & Half ─ ─ ─ ─
LFB Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16
Height Width
CODES MINIMUM SIZES
LSS, LSS HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16
LSS4, LSS6L, LSS6R Cathedral & Half 224mm 8 13/16 183mm 7 3/16
LSS9, LSS10L, LSS10R Eyebrow & Half 209mm 8 3/16 189mm 7 7/16
LFS Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16
Height WIDTH
BP and VP CODES MINIMUM SIZES
LSR, LSR HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2
LSR4, LSR6L, LSR6R Cathedral & Half 172mm 6 3/4 180mm 7 1/16
LSR9, LSR10L, LSR10R Eyebrow & Half 156mm 6 1/8 189mm 7 7/16
LFR VGBP, LFR VGVP LFR Reduced Rail Drawer 92mm 3 5/8 140mm 5 1/2
For This Option add
Suffix "BP" or "VP" to
Codes Directly to Right
Height Width
Codes with Suffix “F”See Page 3 for Frame Options
DFB - Drawer Front Blank 2 1/4” Stile with 1 1/2” Rail 2 1/4” Stile & Rail(All Codes With Suffix “HG”)
Slab Reduced Rail Full Size Rail
Drawer Front Opt ionsCodes with suffix “BP”
Codes with suffix “VP”
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
Lip Stile/Rail
Ply PanelLip Stile/Rail
Lip Stile/Rail
Lip Stile/Rail
Lip Stile/Rail
Lip Stile/Rail
Lip Stile/Rail
Lip Stile/Rail
Lip Stile/Rail
Lip Stile/RailV-Grooved Panel
Beaded Panel
Reversed Panel
Soft Panel
Bevel Panel
Pearl Panel
Multiwood Panel
Cove PanelLip Stile/Rail
See Page 18 for Outside Edge Profile Options
Standard Solid Wood Doors
Stretch Stile/Rail with Optional Panels For Doors See Page 18 for Outside Edge Profile Options
CODES MINIMUM SIZES
CS1 F Square, Full Drawer 127mm 5 140mm 5 1/2
CS2 F Cathedral & Half 127mm 5 180mm 7 1/16
CS8 F Eyebrow & Half 127mm 5 189mm 7 7/16
CF1 F Reduced Rail Drawer 89mm 3 1/2 140mm 5 1/2
Height Width
CODES MINIMUM SIZES
CS1, VS1 HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2
CS2, CS5L, CS5R Cathedral & Half 172mm 6 3/4 180mm 7 1/16
CS8, CS7L, CS7R Eyebrow & Half 156mm 6 1/8 189mm 7 7/16
CF1 Reduced Rail Drawer 89mm 3 1/2 140mm 5 1/2
Height Width
CODES MINIMUM SIZES
CSC, CSC HG Square, Full Drawer 169mm 6 5/8 169mm 6 5/8
CSC4, CSC6L, CSC6R Cathedral & Half 210mm 8 1/4 180mm 7 1/16
CSC9, CSC10L, CSC10R Eyebrow & Half 194mm 7 5/8 189mm 7 7/16
CFC Reduced Rail Drawer 131mm 5 1/8 169mm 6 5/8
Height Width
CODES MINIMUM SIZES
Cs3, CS3 HG Square, Full Drawer 164mm 6 7/16 164mm 6 7/16
Cs4, CS6L, CS6R Cathedral & Half 205mm 8 1/16 189mm 7 7/16
Cs9, CS10L, CS10R Eyebrow & Half 189mm 7 7/16 189mm 7 7/16
Cf3 Reduced Rail Drawer 126mm 4 15/16 164mm 6 7/16
Height Width
CODES MINIMUM SIZES
CSP, CSP HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16
CSP4, CSP6L, CSP6R Cathedral & Half 224mm 8 13/16 183mm 7 3/16
CSP9, CSP10L, CSP10R Eyebrow & Half 209mm 8 3/16 196mm 7 11/16
CFP Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16
Height Width
CODES MINIMUM SIZES
CSB, CSB HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16
Not Available Cathedral & Half ─ ─ ─ ─
Not Available Eyebrow & Half ─ ─ ─ ─
CFB Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16
Height Width
CODES MINIMUM SIZES
CSS, CSS HG Square, Full Drawer 183mm 7 3/16 183mm 7 3/16
CSS4, CSS6L, CSS6R Cathedral & Half 224mm 8 13/16 183mm 7 3/16
CSS9, CSS10L, CSS10R Eyebrow & Half 209mm 8 3/16 189mm 7 7/16
CFS Reduced Rail Drawer 145mm 5 11/16 183mm 7 3/16
Height Width
BP and VP CODES MINIMUM SIZES
CSR, CSR HG Square, Full Drawer 131mm 5 1/8 140mm 5 1/2
CSR4, CSR6L, CSR6R Cathedral & Half 172mm 6 3/4 180mm 7 1/16
CSR9, CSR10L, CSR10R Eyebrow & Half 156mm 6 1/8 189mm 7
7/16
CFR VGBP, CFR VGVP CFR Reduced Rail Drawer 92mm 3 5/8 140mm 5 1/2
For This Option add
Suffix "BP" or "VP" to
Codes Directly to Right
Height Width
Codes with Suffix “F”See Page 3 for Frame Options
DFB - Drawer Front Blank 2 1/4” Stile with 1 1/2” Rail 2 1/4” Stile & Rail(All Codes With Suffix “HG”)
Slab Reduced Rail Full Size Rail
Drawer Front Opt ionsCodes with suffix “BP”
Codes with suffix “VP”
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
Cove Panel
Pearl Panel
Soft Panel
V-Grooved Panel
Beaded Panel
Bevel Panel
Multiwood Panel
Reversed Panel
11
Ply Panel
StretchStile/Rail
StretchStile/Rail
StretchStile/Rail
StretchStile/Rail
StretchStile/Rail
StretchStile/Rail
StretchStile/Rail
StretchStile/Rail
StretchStile/Rail
StretchStile/Rail
1 7/8" mm (47.6 )
MT Doors:
3" 76.2 mm ( )
MT3 Door
MT Stile/Rail (for Door) Multiwood Panel DT Stile/Rail (for Drawer)
DT3 Drawer
MT1 Door
MT Stile/Rail + Ply Panel MT Stile/Rail + Cove Panel MT Stile/Rail + Pearl Panel
MT Stile/Rail + Soft Panel
MTS Door
MTP Door
MTB Door MTR Door
MTC Door
MT Stile/Rail + Bevel Panel MT Stile/Rail + Reversed Panel(Available in Beaded or V-Groove)
MN Doors:
3" 76.2 mm ( ) 1 3/4" mm (44.5 )
MN Stile/Rail (for Door) Multiwood Panel DN Stile/Rail (for Drawer)
MN3 Door DN3 Drawer
MN Stile/Rail + Bevel PanelMN Stile/Rail + Soft Panel
MN Stile/Rail + Pearl PanelMN Stile/Rail + Cove PanelMN Stile/Rail + Ply Panel
MNS Door
MNP Door
MNR DoorMNB Door
MNC DoorMN1 Door
MR Doors:
2 1/4" .2 mm (57 ) 1 3/4" mm (44.5 )
MR Stile/Rail (for Door) Multiwood Panel DR Stile/Rail (for Drawer)
MR3 Door DR3 Drawer
MR Stile/Rail + Bevel PanelMR Stile/Rail + Soft Panel
MR Stile/Rail + Pearl PanelMR Stile/Rail + Ply Panel MR Stile/Rail + Cove Panel
MRP Door
MRS Door
MRC Door
MRB Door
MR1 Door
MRR Door
See Page 3 for Frame Options. For Full Size Rail Drawer Fronts, Add Suffix “HG” to Door Code
See Page 3 for Frame Options. For Full Size Rail Drawer Fronts, Add Suffix “HG” to Door Code.
See Page 3 for Frame Options. For Full Size Rail Drawer Fronts Add Suffix “HG” to Door Code.
MN Stile/Rail + Reversed Panel(Available in Beaded or V-Groove)
MR Stile/Rail + Reversed Panel(Available in Beaded or V-Groove)
Codes
MT1 169mm 6 5/8
MT3 202mm 7 15/16
MTC 207mm 8 1/8
MTR 200mm 7 7/8
MTP, MTB, MTS 223mm 8 3/4
DT1 127mm 5
DT3 145mm 5 11/16
DTC 150mm 5 7/8
DTR 143mm 5 5/8
DTP, DTB, DTS 166mm 6 1/2
D
r
a
w
e
r
D
o
o
r
Height & Width
MINIMUM SIZES
Codes (Doors)
MN1 169mm 6 5/8
MN3 202mm 7 15/16
MNC 207mm 8 1/8
MNR 200mm 7 7/8
MNP, MNB, MNS 223mm 8 3/4
DN1 127mm 5
DN3 139mm 5 7/16
DNC 143mm 5 5/8
DNR 137mm 5 3/8
DNP, DNB, DNS 159mm 6 1/4
D
o
o
r
D
r
a
w
e
r
MINIMUM SIZES
Height & Width
Codes (Doors)
MR1 131mm 5 1/8
MR3 164mm 6 7/16
MRC 169mm 6 5/8
MRR 162mm 6 3/8
MRP, MRB, MRS 185mm 7 1/4
DR1 127mm 5
DR3 139mm 5 7/16
DRC 143mm 5 5/8
DRR 137mm 5 3/8
DRP, DRB,DRS 159mm 6 1/4
D
r
a
w
e
r
D
o
o
r
MINIMUM SIZES
Height & Width
12 Mitered Solid Wood Doors
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
2 1/4" .2 mm (57 ) 1 3/4" mm (44.5 )
MX Doors: MX3 Door
MX Stile/Rail (for Door) Multiwood Panel DX Stile/Rail (for Drawer)
DX3 Drawer
MX1 Door
MX Stile/Rail + Ply Panel MX Stile/Rail + Cove Panel MX Stile/Rail + Pearl Panel
MX Stile/Rail + Soft Panel
MXS Door
MXP Door
MXB Door MXR Door
MXC Door
MX Stile/Rail + Bevel Panel
ML Doors:
1 3/4" mm (44.5 )
ML3 Door DL3 Drawer
ML1 Door
ML Stile/Rail + Ply Panel ML Stile/Rail + Cove Panel ML Stile/Rail + Pearl Panel
ML Stile/Rail + Soft Panel
MLS Door
MLP Door
MLB Door MLR Door
MLC Door
ML Stile/Rail + Bevel Panel
ML Stile/Rail (for Door) Multiwood Panel DL Stile/Rail (for Drawer)
MH Doors: MH3 Door
MH1 Door
MH Stile/Rail + Ply Panel MH Stile/Rail + Cove Panel MH Stile/Rail + Pearl Panel
MH Stile/Rail + Soft Panel
MHS Door
MHP Door
MHB Door MHR Door
MHC Door
MH Stile/Rail + Bevel Panel
2 1/4" .2 mm (57 )2 1/4" .2 mm (57 )
MH Stile/Rail (for Door) Multiwood Panel MH Stile/Rail (for Drawer)
See Page 3 for Frame Options. For Full Size Rail Drawer Fronts Add Suffix “HG” to the Door Code. MX is Available with Outside Edge Profile.
See Page 3 for Frame Options. For Full Size Rail Drawer Fronts, Add Suffix “HG” to Door Code.
See Page 3 for Frame Options. For Full Size Rail Drawer Fronts Add Suffix “HG” to Doors Code.
3" 76.2 mm ( )
MX Stile/Rail + Reversed Panel(Available in Beaded or V-Groove)
ML Stile/Rail + Reversed Panel(Available in Beaded or V-Groove)
MH Stile/Rail + Reversed Panel(Available in Beaded or V-Groove)
Codes (Doors)
MX1 131mm 5 1/8
MX3 164mm 6 7/16
MXC 169mm 6 5/8
MXR 162mm 6 3/8
MXP, MXB, MXS 185mm 7 1/4
DX1 127mm 5
DX3 139mm 5 7/16
DXC 143mm 5 5/8
DXR 137mm 5 3/8
DXP, DXB, DXS 159mm 6 1/4
MINIMUM SIZES
Height & Width
D
r
a
w
e
r
D
o
o
r
Codes (Doors)
ML1 169mm 6 5/8
ML3 202mm 7 15/16
MLC 207mm 8 1/8
MLR 200mm 7 7/8
MLP, MLB, MLS 223mm 8 3/4
DL1 127mm 5
DL3 139mm 5 7/16
DLC 143mm 5 5/8
DLR 137mm 5 3/8
DLP, DLB, DLS 159mm 6 1/4
MINIMUM SIZES
Height & Width
D
o
o
r
D
r
a
w
e
r
Mitered Solid Wood Doors
Codes (Doors)
MH1 131mm 5 1/8
MH3 164mm 6 7/16
MHC 169mm 6 5/8
MHR 162mm 6 3/8
MHP, MHB, MHS 185mm 7 1/4
D
o
o
r
MINIMUM SIZES
Height & Width
13
MH3 HG Drawer
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
Standard MDF Doors14
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
M13 M14 M17
M11 M12 M15
M05 M06 M16
M01 M02 M09
M03 M04 M10
M07 M08 M18
M40 M41 M42
2" 50.8 mm ( )
1" 25.4 mmDrawer Size
( )(D01)
2" 50.8 mm ( )
1" 25.4 mmDrawer Size
( )(D03)
2" 50.8 mm ( )
1" 25.4 mmDrawer Size
( )(D05)
2" 50.8 mm ( )
1" 25.4 mmDrawer Size
( )(D07)
2" 50.8 mm ( )
1" 25.4 mmDrawer Size
( )(D11)
2" 50.8 mm ( )
1" 25.4 mmDrawer Size
( )(D13)
2" 50.8 mm ( )
1" 25.4 mmDrawer Size
( )(D40)
2" 50.8 mm ( )
1" 25.4 mmDrawer Size
( )(D40)
Square Shape Only MDF Doors
M94 2 pc. Recessed Panel Beaded Stile and Rail
M92 2 pc. Step Recessed Panel
M96 V-Groove Panel & V-Groove Through Stile and Rail
15
M86 V-Groove Raised Panel (Square Pattern Routered Only)
M95 Beaded (Washboard) Raised Panel
M34 2 pc. Chamfer Recessed Panel
M32 2 pc. Shaker Panel Recessed 1/4”
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
M38 2 pc. Shaker Panel Recessed 3/8”
2" (50.8 mm)
1" (25.4 mm)Drawer Size (D34)
2 1/4" (57.2 mm)
M70 Cove Panel
M89 2 pc. Cove Recessed Panel
1" (25.4 mm)Drawer Size (D38)
1 1/4" (31.8 mm)Drawer Size (D32)
2 1/4" (57.2 mm)
2" (50.8 mm)
1 1/4" (31.8 mm)Drawer Size (D38)
2 1/4" (57.2 mm)
1 1/4" (31.8 mm)Drawer Size (D70)
2 1/4" (57.2 mm)
2 1/4" (57.2 mm)
1 1/4" (31.8 mm)Drawer Size (D95)
2 1/4" (57.2 mm)
1 1/4" (31.8 mm)Drawer Size (D96, D86)
2 1/4" (57.2 mm)
1" (25.4 mm)Drawer Size (D34)
1 1/4" (31.8 mm)Drawer Size (D94)
2 1/4" (57.2 mm)
1 1/4" (31.8 mm)Drawer Size (D89)
2 1/4" (57.2 mm)
Plywood And Melamine Doors15
.9
Melamine Door .5mm Edge
MELAMINE DOOR .5MM EDGE
Melamine Door 3mm Edge
MELAMINE DOOR 3MM EDGE
3.0
15.9
19
.0
Plywood Door .5mm Edge
PLYPLYWOOD DOOR
.5MM EDGE
Plywood Door 3mm Edge
PLY3PLYWOOD DOOR
3MM EDGE
19
.05
3.00
!
!
!
5/8" (15.9mm) thick PB core slab melamine door.Matching Melamine BackEdges are edge-tapded using .5mm pvc edge tape.
!
!
!
White (MEL)Hard Rock Maple (MEL)Others (call for availability)
! No Frame Options available
Available in:
Summary:
!
!
!
5/8" (15.9mm) thick PB core slab melamine door.Matching Melamine BackEdges are edge-tapded using 3mm pvc edge tape.
Summary:
!
!
!
White (MEL3)Hard Rock Maple (MEL3)Others (call for availability)
! No Frame Options available
Available in:
!
!
3/4" (19.1mm) thick Veneer on Particle Board coreEdges are edge-tapded using 1/8” (3mm) veneer edge tape.
Summary:
!
!
!
!
OakCherryMapleOthers (call for availability)
! Use shaker wood frame of same wood type
Species:
Frame Option:
!
!
3/4" (19.1mm) thick Veneer on Particle Board coreEdges are edge-tapded using .5mm veneer edge tape.
Summary:
PLY PLY3
!
!
!
!
OakCherryMapleOthers (call for availability)
! Use shaker wood frame of same wood type with #13 profile on face and back
Species:
Frame Option:
MEL MEL3
16
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
Custom Mitered Doors like the ones shown here can be ready for delivery in 3 weeks. Set-up charges will apply. Available with any of our panel options.
Fridge Panel
TV Cut-Out
Arched Inside
Examples of Speaker GrillsAvailable with Vinyl & Groove
Vinyl & Groove Option Vinyl & Groove to wrap speaker cloth to Cloth Grill Insert (MDF) to wrap speaker cloth to
3 mm Glass Speaker ClothSpeaker Cloth
Speaker Grills Custom Mitered Doors
Custom Wood and MDF Doors17
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
Cove (2 1/4” Width)Shaker (2 1/4” Width) Ogee (2 1/4” Width) Pillow (2 1/4” Width) MG (2 1/4” Width) MK (3” Width)
MJ (2 1/4” Width) ME (2 1/4” Width) MY (2 1/4” Width) MX (3” Width) DG (1 3/4” Width)For Drawers
DK (1 3/4” Width)For Drawers
Speaker Grills Speaker Grill & Glass Options
For all Standard Wood, MDF and “MX” Mitered Doors
Door Outside Edge Profiles 18
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
Outside Bead(MDF Only)
3/8” Lip
1/4” Cove 1/4” Chamfer 1/4” Round
3/8” Round 3/8” Bead(3mm Drill Not Available)
1/4” Bead
1/8” Chamfer
Flat Ogee3mm Drill Not Available
1/8” RoundFinger Pull
Back Rabbet
MW Ogee
1/4” Lip Flat Cove
1/8” Lip 1/16’ Round
Standard(No Charge)
1/8 Notch
Sub ZeroLarge Radius 1/2” Round Over Cove Finger Pull
#7
#11
#3
#16
#26
#2
#6
#10
#14
#25
#66
#1
#5
#9
#13
#18
#31
#0
#4
#8
#12
#17
#27
#23
Drill Styles for Wood and MDF Doors
Standard Drilling for European Hinges:
Diameter: 35 mmOffset: typical 5mm from edge of door or your spec.Height: 95mm from door top & bottom to centre of holesDrilling Height and Offset are Adjustable.
Style A Drilling for European Hinges:Ferrari pattern
Same as standard with:Two holes for plastic knock-in dowels Diameter: 8.0 mm
Style D Drilling for European Hinges:Ferrari pattern
Same as standard with:Two pilot holes for screwsDiameter: 2.5 mm
Multiwood offers 3 basic drilling types for all our doors. Please specify the type needed at time of order. Custom drill styles are also available (pending approval). Please ask salesperson for details. Hinge drilling matches our Ferrari Clip-On Hinges.
**3 hinges recommended for doors greater than 42" / *** Please consult your particular hinge manufacturer's specs before ordering.
45.0
mm
9.5 mm
35
.0 m
m
8.0 mm
Drill Style A
As PerOrder
95
.0 m
m(U
nle
ss S
pe
cifie
dO
the
rwis
e)
10.0 mm deep
13.0 mm deep
45.0
mm
9.5 mm
35
.0 m
m
2.5 mm
Drill Style D
As PerOrder
95
.0 m
m(U
nle
ss S
pe
cifie
dO
the
rwis
e)
12.0 mm deep
13.0 mm deep
Standard Drilling
95
mm
Un
less
Sp
eci
fie
dO
the
rwis
e)
35
.0 m
m
As PerOrder
Available in all wood types and MDF.Made from Solid wood 3/4" thick, to your specifications. H=grain direction.
Large pieces can be made from MDF core plywood in various wood types as available.
Comes as a pair (front and back).
Bottle Neck
WNRK Diamond Style WAVE Style
Bottle Bottom
Wine Racks
Now available in stock.Sold in 8 Foot Lengths as a pair (front and back)
19
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
Valances
Specify All Dimensions, including F = number of arches.Available in all wood types + MDF. Custom Styles also available.
Scrollings
Cold Air Returns
Custom Fluted Columns
Custom sized columns are available in either dish or v-groove styles single sided or double sided. Please call with your dimensions for pricing.
Shelf Brackets / Corbels
254 [10]
203.2 [8] Standard Stock Item
Shelf brackets are available in all wood types and MDF. Available 3/4” thick or 1-1/2” thick.Stock: Oak, Maple, Cherry, MDF
Custom corbels and custom size shelf brackets also available by special order.
SHB Shelf Bracket (see moulding prices)
STD
Height
Width
Bread Boards & Butcher Blocks
Width
Height
Table Tops3/4” - 1 3/4” Thick
(2 1/4” - 3 ½” Laminations)
MBB - 3/4" thick
Width
Height
Bread Boards
Butcher Block Tops3/4” - 4” Thick
(13/16” Laminations)
7.94 [5/16”]
Cold Air returns are available in standard wood types as well as mdf. There are two stiles, plain and fancy.
Plain Fancy19.05 or 25.4 [3/4”] or [1”]
12.7 [1/2”]
Height
8 1/4" 16 24 32
Width
Standard Cold Air ReturnFinished Sizes
Scrollings can be Through cut or Face cut. Add a minimum 1" to size for 1/2 " border. Custom Sizes Also Available. 4 ½”
Height
10 16 24 34
12 18 26 36
14 20 28 38
Width
3 ½”
2 ½”
Standard Scrolling Sizes
20
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
Butcher Blocks & Table tops are G1Sunless otherwise requested
Multiwood's interior passage doors are available in Standard + MDF door profiles. They are built out of solid MDF or wood. Open frames or frames and mullion are also available. MDF passage doors are built with solid wood insert for hinge attachment. Doors illustrated below are examples only and can be modified to your specifications. Send Us your design for quotation.
Wood and MDF Passage Doors21
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
Wood and MDF Passage Doors22
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
Solid Wood Mouldings23
CW-031 1/4" x 3/4"
PN - 011" x 1 3/8"
3/4” Panel Mould
PN - 091 1/8" x 1 5/8"
3/4” Panel Mould
PN - 1013/16" x 2"
½”Panel Mould
PN - 0813/16" x 1 9/16”½”Panel Mould
PN - 061" x1/2"
3/4” Panel MouldAS - 01
3/8" x 3/4"AS - 07
5/16" x 1 1/4"
CE - 013/4" x 1 5/16"
OC - 021 1/16" x 1 1/16"
CW-021 1/8" x 9/16"
CV - 011/2" x 1/2"
PN - 461" X 1 3/4”
AS - 081/4" x 3/4"
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
CW - 201 5/16" x 2 5/8"
CW - 211 7/32" x 2 1/2"
CW - 041 1/8" x 1 7/8"
AS - 17 3/8" x 3/4"
AS - 401 1/2" x 3"
AS - 143/4" x 1 1/2"
AS - 167/8" x 1 3/4"
Solid Wood Mouldings
CR - 551 1/16" x 3 1/2"
CR - 453/4" x 3 1/4"
CR - 353/4" x 2 11/16"
CR - 063/4" x 4 3/4"
Covers: 3 5/16"W by 3 1/2"H
CR - 053/4" x 4 3/8"
Covers: 3 1/16"Hby 3 3/16"W
CR - 013/4" x 2 1/2"
Covers: 1 7/8"Hby 1 11/16"W
CR - 023/4" x 3 1/2"
Covers: 2 13/16"Hby 2 1/16"W
CR - 90 1 1/4" x 6"
Covers: 4 15/16"H y 3 7/16"W
CR - 803/4" x 3 3/4"
Covers 3"H by 2 5/16"W
CR - 95 1 3/16" x 6"
Covers: 4 7/8"H y 3 1/2”W
CR - 853/4" x 3 3/4"
Covers 3 1/6"H by 2 3/16"W
CR - 043/4" x 2 1/8"
Covers: 1 1/2"Hby 1 1/2"W
24
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
Solid Wood Mouldings
CS - 113/4" x 3 1/2"
CS - 083/4" x 3 1/4"
VA - 013/4" x 3"
PL - 021" x 6"
CR - 70 13/16" x 6"
Covers: 5"H by 3 3/8"W
CR - 6513/16" x 4 13/16”
Covers: 4”H by 2 5/8"W
CR - 6013/16" x 3 3/4"
Covers: 3 3/16"H by 2”W
FLU8” x 3/4” x 8’
25
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
5.0 Product Warranty26
PRODUCT WARRANTY
Products manufactured by Multiwood Inc. (hereinafter referred to as Multiwood) are warranted by Multiwood to be free from failure resulting from defects in material and/or workmanship, within the following limitations:
1. Multiwood agrees to repair or replace, at its option, any part of its own manufacture which proves to be defective, within six months, provided the products have not been subjected to unreasonable abuse or damage and have received reasonable care, commencing from the date of manufacture, provided such parts are returned prepaid to our factory and upon return, found to be defective in material or workmanship. Items that are not returned to our factory (prepaid) for our direct inspection/evaluation will not be warranted.
2. Multiwood will only repair or replace defective product in its original, unfinished state. Once it has been altered (including, but not limited to, chemically treated, painted, stained or lacquered) the warranty will become null and void (excepting structural failure).
3. Natural characteristics of the wood (including but not limited to knots, discoloration, mineral streaking, burl and grain pattern) will not be considered a defect unless specified on the original order. REFER to Wood Specifications
4. Subjecting products to excessive heat, cold or humidity, improper or incorrect installation of hardware or the improper application of finish is sufficient grounds for disqualification under this warranty.
5. Any component or part, whether manufactured by Multiwood or any others, which show signs of abuse, neglect, accident, improper handling, unauthorized alteration or use in such manner as was not intended shall be excluded from any warranties, expressed or implied.
6. Any part that Multiwood considers to be a maintenance item shall be excluded from any warranties, expressed or implied.7. All defective parts must be returned to our factory with all transportation, customs and duty charges prepaid.8. Any warranted replacement parts/products from Multiwood or other manufactures are shipped FOB (collect) from each
respective factory.9. All warranty work to be performed by others must be pre-approved in writing by Multiwood.10. Multiwood shall not be held liable for any extraneous charges, damages, delays or lost production caused by such defects in
material and/or workmanship as described above. The liability of Multiwood under this warranty is limited to the repair and/or replacement (at our option) as originally supplied, as set forth above, providing the claim is made within the above noted warranty period.
11. Any requests to alter our normal construction specifications are not guaranteed.12. Multiwood will only accept warranty claims on warped wood doors if the warpage is more than 1/16 per 18” of height for
doors under 24”wide, and 3/32 per 18” of height for doors over 24” wide, (1mm per 300mm of height for doors under 610mm wide, and 1.5mm per 300mm for doors wider than 610mm.). In ALL cases the maximum warranty heights are 42” (1067mm) or 50” ( 1270mm) with a cross rail and 28” for width.
13. There are no other warranties of any kind, expressed or implied.
Pertinent to Wood Mitered Doors:It is an inherent fact that wood will expand and contract with changes in weather and humidity. Almost all of this movement will occur across the grain. The width of the piece of wood will increase with an increase in humidity or decrease with a decrease in humidity. Mitered doors will react the same way. As the wood in a mitered door takes on moisture the joint will tend to open up on the outside edge of the door. A gap of .5mm is normal during high humidity conditions. If a mitered door loses moisture it will tend to open on the inside of the miter. Under normal humidity conditions mitered doors may open up .5mm. This will not be considered a warranty condition. This movement of wood is beyond our control and is an expected change.
This warranty is expressly in lieu of and supersedes all other warranties, expressed or implied, written or oral, including without limitation any warranties of merchantability or suitable for a particular purpose or application.
Warranty Administration - Please provide invoice for warrantiesAll warranty claims must be made, in writing, to:
Multiwood Inc.th11580 40 Street South East
Calgary, AlbertaT2C 1N9
within 10 days of the manifestation of the defect. Multiwood's obligation on warranty claims and Buyer's Remedy therefore shall be exclusively limited to, at Multiwood's option, any one of the following:
1. Replacing at Multiwood's factory any part proved to be defective,2. Remedying or repairing such defect, or3. Refunding the original purchase price in the form of a credit to be applied to future purchases.
Multiwood may require the return of (or upon Multiwood's prior written consent, Buyer may return) the alleged defective part, transportation charges to be paid by Buyer, before Multiwood recognizes any claim for defective workmanship or material. If the claim is not recognized, Buyer shall reimburse Multiwood for Multiwood's expenses in investigating the claim. Buyer shall pay travel and living expenses for any warranty work Multiwood determines must be undertaken at Buyer's site.
Limitation of LiabilityMultiwood's liability under this warranty will be limited to replacing or repairing the defective product at our option. In no case will Multiwood's liability exceed the contractual value of the order. Buyer's exclusive remedy for any loss or claim resulting from the use or inability to use this product shall be repair or replacement of the defective product, or, at the option of Multiwood, return of the product to Multiwood and refund of the original purchase price.
Finishing MapleWiping stain is not recommended on Maple. Multiwood will not be responsible for any colour or wood variations/defects on maple products when
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
Wood Door Sample Pricing
Custom Size Wood Door Pricing
*Soft raised panel doors are additional 5%
Height x Width sq. in c/sq. in Door c/sq. in Door c/sq. in Door c/sq. in Door c/sq. in Door
13" x 8 1/2" 111 15.12 $16.52 17.67 $19.26 24.09 $26.31 26.65 $29.06 25.30 $27.63
13" x 14 1/2" 189 10.98 $20.42 12.48 $23.17 17.66 $32.85 19.16 $35.59 18.55 $34.49
13" x 20 1/2" 267 9.02 $23.69 10.08 $26.43 15.00 $39.40 16.06 $42.14 15.75 $41.36
16" x 8 1/2" 136 13.75 $18.39 15.83 $21.14 21.38 $28.60 23.46 $31.35 22.45 $30.03
16" x 14 1/2" 232 9.81 $22.39 11.03 $25.14 16.11 $36.77 17.33 $39.51 16.91 $38.61
16" x 20 1/2" 328 8.28 $26.71 9.14 $29.46 13.75 $44.37 14.61 $47.12 14.44 $46.59
18" x 8 1/2" 153 12.82 $19.29 14.67 $22.04 20.20 $30.40 22.05 $33.15 21.21 $31.92 18" x 14 1/2" 261 9.29 $23.86 10.38 $26.60 14.63 $37.58 15.72 $40.32 15.37 $39.46
18" x 20 1/2" 369 7.88 $28.60 8.65 $31.35 12.69 $46.08 13.46 $48.83 13.33 $48.39
21 1/4" x 8 1/2" 181 11.71 $20.85 13.27 $23.59 18.35 $32.68 19.92 $35.43 19.27 $34.31
21 1/4" x 14 1/2" 308 8.57 $25.98 9.49 $28.72 14.08 $42.66 15.00 $45.41 14.78 $44.80
21 1/4" x 20 1/2" 436 7.29 $31.29 7.94 $34.03 12.42 $53.28 13.07 $56.03 13.04 $55.95
23 1/2" x 8 1/2" 200 11.54 $22.71 12.96 $25.46 16.61 $32.68 18.02 $35.43 17.44 $34.31
23 1/2" x 14 1/2" 341 8.23 $27.61 9.06 $30.36 13.15 $44.13 13.98 $46.87 13.81 $46.33
23 1/2" x 20 1/2" 482 7.05 $33.43 7.64 $36.17 11.87 $56.31 12.46 $59.05 12.47 $59.12
28" x 8 1/2" 238 10.68 $25.00 11.87 $27.75 15.35 $35.94 16.54 $38.69 16.12 $37.74
28" x 14 1/2" 406 7.85 $31.37 8.55 $34.11 12.49 $49.91 13.19 $52.66 13.12 $52.41
28" x 20 1/2" 574 6.71 $37.92 7.21 $40.66 11.30 $63.80 11.79 $66.55 11.86 $66.99
30 1/2" x 8 1/2" 259 9.97 $25.40 11.06 $28.14 14.75 $37.58 15.84 $40.32 15.48 $39.46
30 1/2" x 14 1/2" 442 7.35 $31.95 7.99 $34.69 12.33 $53.61 12.97 $56.35 12.94 $56.29
30 1/2" x 20 1/2" 625 6.33 $38.89 6.78 $41.64 11.32 $69.62 11.77 $72.36 11.89 $73.10
OW2 OW3
MWR/MSR/MC3
OW4
MW2
OP3/OWR/OC3/MP3
MW3 MW4MW1/MS1
OW1
27
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
Pricing Custom Height - Using door size that is closest to your door size, but smaller, find the square inch price for the right style of door. Now multiply the height by the width by the square inch price listed, rounding up dimensions to the next full inch.Pricing Custom Width - Calculate the same as Custom Height adding 15% to the cost.Please Note: The calculations above are for estimating purposes only, contact the order desk for an exact price.
MH mitered door styles are 30% more than their respective standard door styles.MT, ML and MN mitered door styles are 25% more than their respective standard door styles.MG, MJ, MK, MR and MX mitered door styles are 20% more than their respective standard door styles.V-Grooved and Beaded Panels add $7.00 per door.V-Groove through Stile & Rail add $7.00 per door.
Cabinet Door and Drawer Height Combinations
Box height 1 Door 1 Drawer 1 Door
384 (15 1/8") 382 (15 1/16")
672 (26 7/16") 670 (26 3/8")
704 (27 11/16") 702 (27 5/8") 189 (7 7/16") 510 (20 1/16") 189 (7 7/16") 2-254 (10")
768 (30 1/4") 765 (30 3/16”) 189 (7 7/16") 574 (22 9/16) 189 (7 7/16") 2-286 (11 1/4")
800 (31 1/2") 797 (31 7/16") 189 (7 7/16") 606 (23 7/8") 189 (7 7/16") 2-302 (11 7/8") 1-189 (7 7/16") 3-200 (7 7/8")
1088 (42 13/16") 1086 (42 3/4")
1376 (54 3/16") 1374 (54 1/8")
2048 (80 5/8") 2046 (80 9/16")
4 - 189 (7 7/16")
4 Drawers3 Drawers
Variations in Door and Drawer heights are possible in increments of 32mm(1 1/4"). If you want to reduce drawer height by 32mm(1 1/4"), add 32mm (1 1/4") to door. This will allow for the standard drilling of the doors to line up with the components.
Box Height Drawer 1 Door
Standard 800 (31 1/2") 189 (7 7/16") 606 (23 7/8") minus 32 (1 1/4") add 32 (1 1/4")
e.g. 800 (31 1/2") 157 (6 3/16") 638 (25 1/8") 638mm
158mm190mm
606mm
Before After
DFB (Solid Slab) PricingMultiply length by price
Prices are based on Oak. Multiply price shown bywood factor (see page 2) for other species
Frame pricing is based on Oak, MDF or Knotty Pine. Please multiply by wood factor to determine pricing for other material types.
To determine a frame's price, start from the same style of flat panel door, and add the up-charge cost. Frame styles illustrated on Page 3.
Type Charge
F $0.00F4 $14.64F6 $23.18F8 $31.72F9 $40.26F10 $48.80F12 $57.34
Solid Slab Drawer Pricing
Width
Price per
Lineal Inch Width
Price per
Lineal Inch
up to 4" 0.42 up to 9" 0.97
up to 5" 0.53 Up to 10" 1.08
up to 6" 0.63 Up to 11" 1.18
up to 7" 0.74 Up to 12" 1.30
up to 8" 0.86 Up to 13" 1.41
Style MDFMelabond
Back
$/sq.ft. $/sq.ft.
M00 6.25 6.88 Imperial Metric Imperial Metric Imperial Metric
M01 7.71 8.49 4 5/16" 109mm 6 5/16" 160mm 6 5/16" 160mm
M02 7.91 8.7 7 15/16" 202mm 6 5/16" 160mm
M03 7.91 8.7 5 1/4" 133mm 7 1/4" 184mm 7 1/4" 184mm
M04 8.12 8.94 8 7/8" 226mm 7 1/4" 184mm
M05 10.01 11.01 5 3/8" 136mm 7 3/8" 187mm 7 3/8" 187mm
M06 10.20 11.22 9" 229mm 7 3/8" 187mm
M07 10.20 11.22 6 5/16" 160mm 8 5/16" 211mm 8 5/16" 211mm
M08 10.40 11.44 9 15/16" 253mm 8 5/16" 211mm
M09 7.91 8.7 7 9/16" 192mm 6 5/16" 160mm
M10 8.12 8.94 8 1/2" 216mm 7 1/4" 184mm
M11 8.12 8.94 5 3/8" 136mm 7 3/8" 187mm 7 3/8" 187mm
M12 8.33 9.17 9" 229mm 7 3/8" 187mm
M13 8.12 8.94 6 5/16" 160mm 8 5/16" 211mm 8 5/16" 211mm
M14 8.33 9.17 9 15/16" 253mm 8 5/16" 211mm
M15 8.33 9.17 8 5/8" 219mm 7 3/8" 187mm
M16 10.20 11.22 8 5/8" 219mm 7 3/8" 187mm
M17 8.33 9.17 9 9/16" 243mm 8 5/16" 211mm
M18 10.40 11.44 8 5/16" 211mm 8 5/16" 211mm
M32 10.01 n/a 3 1/4" 83mm 5 1/4" 133mm 5 1/4" 133mm
M34 11.03 n/a 3 1/4" 83mm 5 1/4" 133mm 5 1/4" 133mm
M70 10.40 11.44 5 7/16" 138mm 7 7/16" 189mm 7 7/16" 189mm
M86 9.37 10.31 3 3/8" 86mm 5 3/8" 137mm 5 3/8" 137mm
M89 10.01 n/a 3 1/4" 83mm 5 1/4" 133mm 5 1/4" 133mm
M92 11.57 n/a 3 1/4" 83mm 5 1/4" 133mm 5 1/4" 133mm
M94 11.13 n/a 3 1/4" 83mm 5 1/4" 133mm 5 1/4" 133mm
M95 11.13 12.25 3 1/2" 89mm 5 1/2" 140mm 5 1/2" 140mm
M96 9.37 10.31 3 3/8" 86mm 5 3/8" 137mm 5 3/8" 137mm
Drawers Doors Doors/Drawers
MDF Doors
Minimum Height Minimum Width
Minimum Sizes - MDF Doors & Drawers
MDF Door Minimum Sizes and Pricing
28 Frame Pricing
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
Sheet Goods29
NOTE: Veneer Sheet Goods have Particle Core, NOT Plywood core.
*Subject to Availability
Slot Wall, Bead Board & V-Grooving Sheet Goods require minimum 5 days for delivery. Requires MDF core, call for pricing and availability.
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
Code Price Lift Price Code Price Lift Price
CA1 70.60$ 68.17$ PGTALD $48.57 n/a
CAP 94.19$ 91.05$ PGTCHY $42.72 n/a
CAP1 80.48$ 77.88$ PGTMPL $36.95 n/a
KA1 58.44$ 56.42$ PGTOAK $36.95 n/a
KAP 83.87$ 80.98$ PGTWAL $50.63 n/a
KAP1 65.53$ 63.27$ EWAL 141.75$ 136.50$
BA1 54.10$ 52.35$ EWEN 133.65$ 128.70$
BAP 76.95$ 74.30$ EZEB 141.75$ 136.50$
BAP1 68.54$ 66.33$ ERWO 141.75$ 136.50$
CH1 79.45$ 76.71$ ETEWEN $147.62 n/a
CHP 97.96$ 94.58$ ETEWAL $147.62 n/a
CHP1 80.23$ 77.64$ ETEZEB $147.62 n/a
MA1 50.90$ 49.14$ ETERWO $147.62 n/a
MAP121 71.78$ 69.30$ ETEWEN2 $230.58 n/a
MAC58 54.59$ 52.71$ ETEWAL2 $230.58 n/a
MAC 59.44$ 57.39$ ETEZEB2 $230.58 n/a
MAC1 52.61$ 50.79$ ETERWO2 $230.58 n/a
*MACS 54.23$ 52.36$ K3 26.22$ 18.01$
MAMD1BP 106.69$ 103.01$ FLX 96.11$ n/a
OA1 54.22$ 52.35$ FLXPLY 60.67$ n/a
OAP 63.45$ 61.26$ MB1 57.27$ 40.27$
QO1 66.25$ 64.30$ MD1 21.06$ 12.86$
QOP 86.15$ 83.54$ MD2 22.68$ 21.84$
WA1 87.85$ 85.02$ MD5 27.35$ 26.34$
WAP1 94.09$ 90.85$ MD7 23.36$ 22.49$
WAP 105.60$ 101.83$ MD7P 27.34$ 26.33$
BK1 23.13$ n/a MD7BP 49.06$ 47.24$
BK4 40.51$ n/a MD4 46.21$ 44.50$
ME2W 33.25$ 25.48$ MED 58.85$ n/a
ME5W 33.62$ 22.43$ BB12 40.37$ 38.87$
ME3W 39.04$ 29.32$ BB18 48.47$ 46.67$
ME2M 48.11$ 32.70$ SPR58 23.42$ 22.56$
ME5M 41.85$ 29.25$ SPR38 14.78$ 14.24$
ME3M 53.91$ 40.17$
PGTW White Preglued Edge Tape 27.84$ n/a PGTM 59.29$ n/a
Echo Wood Sheets and Edge Tapes Stocked in Limited Quantitys
1/4" MDF Flex. Kerfed 4' Way Ranger
HR Maple Preglued Edge Tape
3/4" Echo Rift WHITE OAK P/C G2S
.5mm Echo Qtr Wenge Veneer Raw ET
.5mm Echo Qtr Zebrawood Veneer Raw ET
.5mm Echo Rift White Oak Veneer Raw ET
2mm Echo Qtr Wenge Veneer Raw ET
2mm Echo Qtr Walnut Veneer Raw ET
2mm Echo Qtr Zebrawood Veneer Raw ET
2mm Echo Rift White Oak Veneer Raw ET
5/8" K-3 - Raw Particle Board
3/4" HR Maple Melamine 2 Sides
5/8" White Melamine 2 Sides
3/4" White Melamine 2 Sides
1/2" HR Maple Melamine 2 Sides
5/8" HR Maple Melamine 2 Sides
3/4" Walnut P/C A-1 G2S
1/4" White Backing - MDF 1 side
1/4" White / HR Maple Melamine Backing
1/4" Oak P/C A-4 G1S
3/4" Oak P/C A-2 G2S
1/2" White Melamine 2 Sides
1/4" Oak QTR Sawn P/C G1S
3/4" Oak QTR Sawn P/C G2S
1/4" Walnut P/C A-4 G1S
3/4" Walnut P/C A-4 G1S
3/4" Alder Clear P/C A-4 G1S
1/4" Knotty Alder P/C C-4 G1S
1/4" Alder Clear P/C A-4 G1S
3/4" Maple MDF Core Bead Board 3"cc 8'
3/4" Maple P/C CAB Grade G2S Shop
1/4" Cherry P/C A-4 G1S
3/4" Cherry P/C A-1 G2S
3/4" Knotty Alder P/C C-1 G2S
3/4" Knotty Alder P/C C-4 G1S
1/4" Beech P/C G1S
3/4" MDF Premium Ranger
3/4" MDF Bead Board 3"cc 8' Shop
5/8 " Spruce Sheathing
Mahogany Flex 5mm x 95"x48", 4' Grain
3/4" MDF Melabond Back W1S Ranger
1/4" MDF Premium Ranger
1/2” MDF Premium Ranger
5/8" MDF Premium Ranger
3/4" MDF SHOP Ranger
3/8 " Spruce Sheathing
1" MDF Premium Ranger
3/4" Medex Premium
12mm Baltic Birch - 60" x 60"
18mm Baltic Birch 60" x60"
Alder Veneer Preguled Edge Tape
Cherry Veneer Preglued Edge Tape
Maple Veneer Preglued Edge Tape
Oak Veneer Preglued Edge Tape
DESCRIPTION
3/4" Alder Clear P/C A-1 G2S
.5mm Echo Qtr Walnut Veneer Raw ET
Walnut Veneer Preglued Edge Tape
3/4" Beech P/C G2S
3/4" Beech P/C G1S
3/4" Echo Qtr WALNUT P/C G2S
3/4" Echo Qtr WENGE P/C G2S
3/4" Echo Qtr ZEBRAWOOD P/C G2S
DESCRIPTION
3/4" Cherry P/C A-4 G1S
3/4" Maple P/C CAB Grade G1S BWPF-4
1/4" Maple P/C B-4 G1S
1/2" Maple P/C BW-4 G1S
5/8" Maple P/C CAB Grade G2S BWPF-2
3/4" Maple P/C CAB Grade G2S BWPF-2
Melamine Cabinet Components - White Melamine, Maple Melamine, **White Melamine With Oak or Maple Veneer Edge (Not Stock Item allow 2 weeks)
Stock Cabinet Components30
Code Item White MapleWhite Melamine
Veneer Edge**
SG Stove Gable 15 1/8 x 12 1/8 384 x 308 $7.07 $8.47 $7.89
SG1 Stove Gable One 20 1/8 x 12 1/8 512 x 308 $9.32 $11.19 $10.01
SGS Stove Gable Special 26 1/2 x 12 1/8 672 x 308 $11.58 $16.00 $12.89
UG Upper Gable 31 1/2 x 12 1/8 800 x 308 $9.78 $13.51 $10.61
UG1 Upper Gable One 36 1/2 x 12 1/8 928 x 308 $11.58 $13.92 $12.89
UGS Upper Gable Special 42 7/8 x 12 1/8 1088 x 308 $13.91 $16.21 $14.91
DUG Douglas Upper Gable 36 1/2 x 15 7/8 928 x 404 $12.44 $14.31 $13.35
DGS Douglas Gable Special 42 7/8 x 15 7/8 1088 x 404 $14.60 $16.58 $15.65
MG Microwave Gable 15 1/8 x 15 7/8 384 x 404 $9.32 $11.19 $10.01
MG1 Microwave Gable One 20 1/8 x 15 7/8 512 x 404 $9.89 $11.88 $10.64
MGS Microwave Gable Special 26 1/2 x 15 7/8 672 x 404 $10.98 $13.19 $12.20
VG Vanity Gable 27 3/4 x 20 3/8 704 x 518 $12.48 $14.35 $13.91
VGS Vanity Gable Special 26 7/16 x 20 3/8 672 x 518 $12.48 $14.35 $13.91
FG Fridge Gable 15 1/8 x 23 1/2 384 x 596 $9.78 $12.26 $10.86
FG1 Fridge Gable One 20 1/8 x 23 1/2 512 x 596 $11.11 $12.78 $11.91
FGS Fridge Gable Special 26 1/2 x 23 1/2 672 x 596 $12.42 $14.28 $13.84
LG Lower Gable 31 1/2 x 23 1/2 800 x 596 $12.80 $14.71 $14.22
LGS Lower Gable Special 30 1/4 x 23 1/2 768 x 596 $12.80 $14.71 $14.22
PG Pantry Gable 80 5/8 x 23 1/2 2048 x 596 $30.86 $37.03 $34.30
PGS Pantry Gable Special 92 x 23 1/2 2336 x 596 $32.36 $38.81 $35.95
DUTB Drilled Upper Top/Bottom 96 x 12 1/8 2440 x 308 $29.77 $33.76 $33.06
DMWB Drilled Microwave Bottom 96 x 15 7/8 2440 x 404 $32.02 $36.67 $35.56
CN1 Corner Gable One 30 1/4 x 6 768 x 152 $9.78 $11.24 n/a
CN2 Corner Gable Two 35 1/4 x 6 896 x 152 $10.91 $12.57 n/a
CN3 Corner Gable Three 41 1/2 x 6 1056 x 152 $11.58 $13.30 n/a
CUS 22" Corner Upper Shelf (308 gable) 21 5/8 x 21 5/8 551 x 551 $10.96 $12.59 $12.30
CS1 26" Corner Upper Shelf (308 gable) 25 3/4 x 25 3/4 651 x 651 $12.69 $14.60 $14.03
DCS 26" Corner Upper Shelf (404 gable) 25 3/4 x 25 3/4 651 x 651 $15.37 $18.44 $16.69
CUB 22" Corner Upper Bottom (308 gable) 22 x 22 559 x 559 $10.96 $12.59 $12.28
CB1 26" Corner Upper Bottom (308 gable) 26 x 26 660 x 660 $12.69 $14.60 $14.03
DCB 26" Corner Upper Bottom (404 gable) 26 x 26 660 x 660 $15.37 $18.44 $16.70
CLB Corner Lower Bottom (596 gable) 31 1/2 x 31 1/2 800 x 800 $14.82 $17.05 $16.16
CL90 L Shaped Lower Bottom (596 gable) 36 x 36 914 x 914 $16.32 $18.75 $17.66
DSR Drawer Rail – Small (5/8" Rabbet) 97 x 4 2464 x 100 $8.25 $9.92 $9.57
DMR Drawer Rail – Medium (5/8" Rabbet) 97 x 5 2464 x 127 $9.35 $11.31 $10.67
DLR Drawer Rail – Large (5/8" Rabbet) 97 x 6 3/4 2464 x 170 $10.49 $12.73 $11.81
DXR Drawer Rail – Extra Large (5/8" Rabbet) 97 x 9 2464 x 230 $14.33 $17.53 $15.65
D4D Drawer Rail – Small (5/8" Dado) 97 x 4 2464 x 100 $12.49 $14.18 $13.83
D5D Drawer Rail – Medium (5/8" Dado) 97 x 5 2464 x 127 $13.60 $15.57 $14.93
D7D Drawer Rail – Large (5/8" Dado) 97 x 6 3/4 2464 x 170 $14.74 $16.99 $16.06
D9D Drawer Rail – Extra Large (5/8" Dado) 97 x 9 2464 x 230 $18.57 $21.79 $19.90
D12D Drawer Rail – File (5/8" Dado) 97 x 12 2464 x 308 $20.07 $25.26 $21.41
MDS Drawer Rail – Small 97 x 4 2464 x 100 $6.79 $8.47 $7.50
MDL Drawer Rail – Large 97 x 6 3/4 2464 x 170 $9.03 $11.28 $10.08
MDX Drawer Rail – Extra Large 97 x 9 2464 x 230 $12.87 $16.09 $13.76
US Upper Shelf 97 x 11 3/8 2464 x 288 $13.18 $17.15 $14.49
UTB Upper Top/Bottom 97 x 12 1/8 2464 x 308 $13.18 $17.15 $14.60
MWB Microwave Bottom 97 x 15 7/8 2464 x 404 $15.42 $20.07 $17.11
VB Vanity Bottom 97 x 20 3/8 2464 x 518 $22.35 $27.92 $24.68
LS Lower Shelf 97 x 22 5/8 2464 x 576 $22.35 $29.06 $24.84
LB Lower Bottom 97 x 23 1/2 2464 x 596 $22.50 $30.38 $25.00
SB Sink Bottom 97 x 25 1/2 2464 x 648 $24.32 $31.63 $25.78
MDWMPL 3/4" Maple Veneer P/C 3mm edge 2 Long 97 x 12 2464 x 304.8 n/a n/a $35.95
Size (Metric)
H W
Size (Imperial)
H W
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
Cabinet Hardware31
*All Hinges in Stock With or Without Knock-in Dowel Plugs
Edge Tape
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
Style Item Unit Price Pair/Case Case Price
AE14 14" Full Extension Slides - Accuride, Easy Close pair $23.70 10 $213.38
AE16 16" Full Extension Slides - Accuride, Easy Close pair $24.11 10 $216.92
AE18 18" Full Extension Slides - Accuride, Easy Close pair $24.42 10 $219.84
AE20 20" Full Extension Slides - Accuride, Easy Close pair $25.06 10 $225.58
AE22 22" Full Extension Slides - Accuride, Easy Close pair $26.10 10 $234.85
F6 6" Full Extension Slides - Accuride pair $14.64 10 $110.52
F8 8" Full Extension Slides - Accuride pair $14.76 10 $111.45
F10 10" Full Extension Slides - Accuride pair $14.85 10 $108.41
F12 12" Full Extension Slides - Accuride pair $14.91 10 $109.29
F14 14" Full Extension Slides - Accuride pair $15.27 10 $110.69
F16 16" Full Extension Slides - Accuride pair $15.50 10 $113.09
F18 18" Full Extension Slides - Accuride pair $15.95 10 $113.74
F20 20" Full Extension Slides - Accuride pair $16.43 10 $114.51
F22 22" Full Extension Slides - Accuride pair $17.07 10 $122.14
B12 12" Blumotion Runner Pairs/Locks - Regular pair $33.33 6 $179.98
B14 14" Blumotion Runner Pairs/Locks - Regular pair $34.20 6 $184.77
B16 16" Blumotion Runner Pairs/Locks - Regular pair $34.44 6 $185.95
B18 18" Blumotion Runner Pairs/Locks - Regular pair $34.83 6 $188.10
B20 20" Blumotion Runner Pairs/Locks - Regular pair $34.99 6 $188.94
B22 22" Blumotion Runner Pairs/Locks - Regular pair $37.21 6 $200.90
BHD20 20" Blumotion Runner Pairs/Locks - Heavy Duty pair $56.33 6 $304.21
BHD22 22" Blumotion Runner Pairs/Locks - Heavy Duty pair $59.11 6 $319.15
BLUJIG Blumotion Tandem Bore Template - Jig for Installation of Slides ea $31.81
H11SOFT 110 Full Overlay Soft Close pair $9.46 100 $852.00
H10 110 Clip-On Inset Hinges w/ Mounting Plates - 5mm Drill pair $7.61 100 $685.08
H11 110 Clip-On Full Overlay Hinge w/ Mounting Plates - 5mm Drill pair $5.99 100 $538.19
H12 110 Clip-On Half Overlay Hinge w/ Mounting Plates - 5mm Drill pair $6.29 100 $566.05
H17 170 Clip-On Full Overlay Hinge w/ Mounting Plates - 5mm Drill pair $14.67 50 $659.76
H45 45 Clip-On Hinge w/ Mounting Plates - 5mm Drill pair $13.90 100 $1,249.86
HN45 Negative 45 Clip-On Hinge w/ Mounting Plates - 4.5mm Plate pair $13.90
HF1 110 Face Frame Hinge w/ Mounting Plates - 3mm Drill pair $7.61 150 $1,027.63
HLS Lasy Susan Hinge w/ Mounting Plates - 0mm Drill pair $14.49 100 $1,304.30
HPN 30" Brass Piano Hinge ea $7.47
DOWEL 8mm Dowels for Ferrari Hinges ea $0.10
SHIMS Bundle (12 pcs) 8" Cedar Shims ea $2.56 84 Bndls $193.61
SHIMLARGE Bundle (100 pcs) 8" Cedar Shims ea $10.98
retail Style Item Unit Price
PGTW 13/16" x 250' roll white preglued ET Roll $27.84
PGTM 13/16" x 250' roll hard rock maple preglued ET. Roll $59.29
PGTALD 13/16" x 250' roll alder veneer preguled ET. Roll $70.76
PGTWAL 13/16" x 250' roll walnut veneer preglued ET. Roll $50.63
PGTMPL 13/16" x 250' roll maple veneer preglued ET. Roll $36.96
PGTOAK 13/16" x 250' roll oak veneer preglued ET. Roll $36.96
PGTCHY 13/16" x 250' roll cherry veneer preglued ET. Roll $42.73
PGTBCH 13/16" x 250' roll beech veneer preglued ET. Roll $36.50
retail Style Item Unit Price
ETEWEN 0.5mm x 22mm x 550' roll echo Qtr Wenge veneer raw ET. Roll $147.62
ETEWAL 0.5mm x 22mm x 550' roll echo Qtr Walnut veneer raw ET. Roll $147.62
ETEZEB 0.5mm x 22mm x 550' roll echo Qtr Zebrawood veneer raw ET. Roll $147.62
ETERWO 0.5mm x 22mm x 550' roll echo rift cut white oak veneer raw ET. Roll $147.62
ETEWEN2 2mm x 22mm x 336' roll echo Qtr wenge veneer raw ET. Roll $231.19
ETEWAL2 2mm x 22mm x 336' roll echo Qtr walnut veneer raw ET. Roll $231.19
ETEZEB2 2mm x 22mm x 336' roll echo Qtr zebrawood veneer raw ET. Roll $231.19
ETERWO2 2mm x 22mm x 336' roll echo rift cut white oak veneer raw ET. Roll $231.19
Style Item Unit Price
WAMELS Wilsonart Melamine Glue 473ML ea $12.14
WA10S Wilsonart WA10 Blue 473ML ea $5.98
WA10M Wilsonart WA10 Blue 3.78L ea $29.02
WA10L Wilsonart WA10 Blue 18.9L ea $118.93
K28 28" Kidney lazy susan - 2 shelf, complete w/ hardware ea $81.40
R28 28" Round lazy susan - 2 shelf, complete w/ hardware ea $81.40
CAPW FastCap White Sticky Screw Cap - Sheet of 52 ea $2.75
CAPWC FastCap Maple Sticky Screw Cap - Package of 1040 pkg $38.98
CAPM FastCap Maple Sticky Screw Cap - Sheet of 52 ea $3.36
CAPMC FastCap Maple Sticky Screw Cap - Package of 1040 pkg $48.74
SHF Shelf support clips - 100 pkg, clear w/metal support pin pkg $6.81
BMP Rubber Door Bumpers - Sheet of 100, Clear ea $7.89
SCSP 13mm Euro Screw Pkg of 50 - #2 Phillips Head pkg $4.64
SCWC #6-5/8” Screw Pack of 100 - #1 Robertson Head pkg $4.15
SPR 1" Slide Spacer Set - Set of 4 w/ Mounting Screws set $4.15
CAPMPL Maple Veneer Sticky Screw Cap Sheet of 52 ea $4.45
CAPMPLC Maple Veneer Sticky Screw Cap Package of 260 pkg $19.83
CAPOAK Oak Veneer Sticky Screw Cap Sheet of 52 ea $4.45
CAPOAKC Oak Veneer Sticky Screw Cap Package of 260 pkg $19.83
Style Item Unit Price
OIL 500ml denatured mineral oil - butcher block treatment ea $6.97
CSB411 10x80T chopsaw blade - ATB neg rake-moulding ea $91.50
CSB431 10x50T combination blade - Positive rake-all round ea $91.50
CSB445 10x80T blade - Triple chip flat top (Melamine) ea $109.80
DB5 5mm Brad Point Drill - For Shelf Clip Holes (Right Hand) ea $19.84
HSM20 500 - M4 X 20 PAN HEAD ROBERTSON box $34.16
HSM25 500 - M4 X 25 PAN HEAD ROBERTSON box $36.60
HSM35 500 - M4 X 35 PAN HEAD ROBERTSON box $45.14
HSM40 500 - M4 X 40 PAN HEAD ROBERTSON box $51.24
HSI78 100 - #8 X 7/8 TRUSS HEAD PHILLIPS box $21.96
HSI1 100 - #8 X 1 TRUSS HEAD PHILLIPS box $21.96
HSI125 100 - #8 X 1 1/4 TRUSS HEAD PHILLIPS box $25.62
HSI150 100 - #8 X 1 1/2 TRUSS HEAD PHILLIPS box $26.84
DB5CHK Adapter Chuck 1/4" hex to DB5 ea $23.79
CC48 48" x 250' corrugated packing cardboard - 1 Side ea $92.17
CC30 30" x 250' corrugated packing cardboard - 1 Side ea $69.30
WRAP Bubble Wrap 48'' x 250" Roll ea $139.26
FOAM 3/32 X 48 X 750' PERF AT 1/2" roll $232.11
Wood Moulding Prices
32
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
Solid Lumber - S4F & S3R
Price per lineal foot. / Random Lengths
S3R
Moulding Poplar Oak White Maple CherryAS-01 $0.88 $1.22 $1.32 $2.03AS-07 $0.88 $0.94 $1.28 $1.63AS-08 $0.54 $0.72 $0.81 $0.99AS-14 $1.32 $1.85 $2.16 $3.20AS-16 $1.55 $2.15 $2.55 $3.72AS-17 $0.88 $1.22 $1.32 $2.03AS-40 $4.38 $6.88 $9.09 $13.05AS-75 $1.10 $1.28 $1.78 $2.16AS-975 $1.10 $1.28 $1.78 $2.16CE-01 $1.18 $1.57 $2.17 $3.18CR-01 $1.54 $2.43 $2.84 $4.16CR-02 $2.15 $3.21 $3.81 $5.49CR-04 $1.37 $2.15 $2.60 $3.88CR-05 $2.85 $4.22 $5.61 $8.20CR-06 $3.20 $4.58 $5.84 $7.81CR-35 $1.78 $2.96 $3.60 $5.37CR-45 $2.24 $3.42 $4.27 $6.22CR-55 $3.25 $4.45 $6.71 $8.91CR-60 $2.57 $3.57 $4.51 $6.14CR-65 $3.29 $4.58 $5.61 $9.88CR-70 $4.04 $5.49 $7.44 $11.83CR-80 $2.57 $3.57 $4.58 $6.14
Moulding Poplar Oak White Maple CherryCR-85 $2.65 $3.68 $4.58 $6.31CR-90 $6.38 $9.70 $13.18 $17.20CR-95 $6.38 $9.70 $13.18 $17.20CS-08 $1.73 $2.99 $3.75 $5.14CS-11 $2.17 $3.01 $4.03 $5.20CV-01 $0.70 $0.99 $1.12 $1.50CW-02 $0.81 $1.37 $1.56 $2.33CW-03 $0.94 $1.54 $1.73 $3.07CW-04 $2.09 $3.55 $4.64 $6.04CW-20 $3.05 $4.82 $5.86 $7.44CW-21 $3.05 $4.82 $5.86 $7.44OC-02 $1.40 $2.15 $2.76 $3.72PL-02 $4.32 $7.26 $9.46 $12.32PN-01 $0.96 $1.54 $1.62 $2.61PN-06 $0.93 $1.22 $1.28 $2.07PN-08 $1.34 $2.34 $3.17 $4.06PN-09 $1.37 $2.56 $3.42 $4.37PN-10 $1.56 $2.49 $3.28 $4.12PN-16 $0.95 $1.46 $1.88 $2.53PN-46 $1.49 $2.56 $2.70 $4.45VA-01 $2.10 $3.18 $4.03 $6.37
CODE SIZE NET PRICE CODE SIZE NET PRICE
1X2ALD 1x2 3/4" x 1-1/2" $2.65 1X2CHY 1x2 3/4" x 1-1/2" $3.861X3ALD 1x3 3/4" x 2-1/2" $3.86 1X3CHY 1x3 3/4" x 2-1/2" $5.901X4ALD 1x4 3/4" x 3-1/2" $5.11 1X4CHY 1x4 3/4" x 3-1/2" $7.961X6ALD 1x6 3/4" x 5-1/2" $6.83 1X6CHY 1x6 3/4" x 5-1/2" $10.891X8ALD 1x8 3/4" x 7-1/4" $8.86 1X8CHY 1x8 3/4" x 7-1/4" $14.171X10ALD 1x10 3/4" x 9-1/4" $11.09 1X10CHY 1x10 3/4" x 9-1/4" $17.88
CODE SIZE NET PRICE CODE SIZE NET PRICE
1X2MPL 1x2 3/4" x 1-1/2" $2.34 1X2OAK 1x2 3/4" x 1-1/2" $2.261X3MPL 1x3 3/4" x 2-1/2" $3.36 1X3OAK 1x3 3/4" x 2-1/2" $3.241X4MPL 1x4 3/4" x 3-1/2" $4.37 1X4OAK 1x4 3/4" x 3-1/2" $4.221X6MPL 1x6 3/4" x 5-1/2" $5.82 1X6OAK 1x6 3/4" x 5-1/2" $5.581X8MPL 1x8 3/4" x 7-1/4" $7.50 1X8OAK 1x8 3/4" x 7-1/4" $7.221X10MPL 1x10 3/4" x 9-1/4" $9.37 1X10OAK 1x10 3/4" x 9-1/4" $8.98
CODE Description SIZE PRICE / BFT
S3RALD Clear Alder 3/4" X RW $10.32S3RBCH Beech 3/4" X RW $9.59S3RCHY Cherry 3/4" X RW $16.36
S3RKA Knotty Alder 3/4" X RW $5.09
S3RMPL Maple 3/4" X RW $8.78
S3ROAK Oak 3/4" X RW $8.45
S3RPOP Poplar 3/4" X RW $6.11
S3RQO Qtr. Sawn Oak 3/4" X RW $14.16S3RWAL Walnut 3/4" X RW $18.96Random width and length , planed and two faces, straight line ripped one edge. Pricing per board foot.
, sanded
CODE Description Price / ft
AS07MDF Bullnose Door Stop 3/8 x 1-1/4 $0.23
JAMBMDF MDF Flatjamb 11/16 x 4-9/16 $0.65JAMB69MDF MDF Flatjamb 11/16 x 6-9/16 $0.94
MDF Door Jamb Material
33
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
Company: Date: PO#
Phone: Fax: Pick Up � Ship � Via:
Job Reference: Ship Address:
Site Address: City: PROV:
Code QTY Code QTY
CA1 PGTALD
CAP PGTCHY
CAP1 PGTMPL
KA1 PGTOAK
KAP PGTWAL
KAP1 EWAL
BA1 EWEN
BAP EZEB
BAP1 ERWO
CH1 ETEWEN
CHP ETEWAL
CHP1 ETEZEB
MA1 ETERWO
MAP121 ETEWEN2
MAC58 ETEWAL2
MAC ETEZEB2
MAC1 ETERWO2
*MACS K3
MAMD1BP FLX
OA1 FLXPLY
OAP MB1
QO1 MD1
QOP MD2
WA1 MD5
WAP1 MD7
WAP MD7P
BK1 MD7BP
BK4 MD4
ME2W MED
ME5W BB12
ME3W BB18
ME2M SPR58
ME5M SPR38
ME3M
PGTW White Preglued Edge Tape PGTM
Echo Wood Sheets and Edge Tapes Stocked in Limited Quantitys
1/4" MDF Flex. Kerfed 4' Way Ranger
HR Maple Preglued Edge Tape
3/4" Echo Rift WHITE OAK P/C G2S
.5mm Echo Qtr Wenge Veneer Raw ET
.5mm Echo Qtr Zebrawood V eneer Raw ET
.5mm Echo Rift White Oak Veneer Raw ET
2mm Echo Qtr Wenge Veneer Raw ET
2mm Echo Qtr Walnut Veneer Raw ET
2mm Echo Qtr Zebrawood Veneer Raw ET
2mm Echo Rift White Oak Veneer Raw ET
5/8" K-3 - Raw Particle Board
3/4" HR Maple Melamine 2 Sides
5/8" White Melamine 2 Sides
3/4" White Melamine 2 Sides
1/2" HR Maple Melamine 2 Sides
5/8" HR Maple Melamine 2 Sides
3/4" Walnut P/C A-1 G2S
1/4" White Backing - MDF 1 side
1/4" White / HR Maple Melamine Backing
1/4" Oak P/C A-4 G1S
3/4" Oak P/C A-2 G2S
1/2" White Melamine 2 Sides
1/4" Oak QTR Sawn P/C G1S
3/4" Oak QTR Sawn P/C G2S
1/4" Walnut P/C A-4 G1S
3/4" Walnut P/C A-4 G1S
3/4" Alder Clear P/C A-4 G1S
1/4" Knotty Alder P/C C-4 G1S
1/4" Alder Clear P/C A-4 G1S
3/4" Maple MDF Core Bead Board 3"cc 8'
3/4" Maple P/C CAB Grade G2S Shop
1/4" Cherry P/C A-4 G1S
3/4" Cherry P/C A-1 G2S
3/4" Knotty Alder P/C C-1 G2S
3/4" Knotty Alder P/C C-4 G1S
1/4" Beech P/C G1S
3/4" MDF Premium Ranger
3/4" MDF Bead Board 3"cc 8' Shop
5/8 " Spruce Sheathing
Mahogany Flex 5mm x 95"x48", 4' Grain
3/4" MDF Melabond Back W1S Ranger
1/4" MDF Premium Ranger
1/2” MDF Premium Ranger
5/8" MDF Premium Ranger
3/4" MDF SHOP Ranger
3/8 " Spruce Sheathing
1" MDF Premium Ranger
3/4" Medex Premium
12mm Baltic Birch - 60" x 60"
18mm Baltic Birch 60" x60"
Alder Veneer Preguled Edge Tape
Cherry Veneer Preglued Edge Tape
Maple Veneer Preglued Edge Tape
Oak Veneer Preglued Edge Tape
DESCRIPTION
3/4" Alder Clear P/C A-1 G2S
.5mm Echo Qtr Walnut Veneer Raw ET
Walnut Veneer Preglued Edge Tape
3/4" Beech P/C G2S
3/4" Beech P/C G1S
3/4" Echo Qtr WALNUT P/C G2S
3/4" Echo Qtr WENGE P/C G2S
3/4" Echo Qtr ZEBRAWOOD P/C G2S
DESCRIPTION
3/4" Cherry P/C A-4 G1S
3/4" Maple P/C CAB Grade G1S BWPF-4
1/4" Maple P/C B-4 G1S
1/2" Maple P/C BW-4 G1S
5/8" Maple P/C CAB Grade G2S BWPF-2
3/4" Maple P/C CAB Grade G2S BWPF-2
Sheets Goods Order Form
Sheets Goods Order Form Sheets/Hardware Order Form34
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
C o d e I t e m U n i t Q u a n t i ty P a i r s / C a s e C a s e s
A E 1 4 1 4 " F u ll E x t e n s i o n S li d e s , E a s y C lo s e p a ir 1 0
A E 1 6 1 6 " F u ll E x t e n s i o n S li d e s , E a s y C lo s e p a ir 1 0
A E 1 8 1 8 " F u ll E x t e n s i o n S li d e s , E a s y C lo s e p a ir 1 0
A E 2 0 2 0 " F u ll E x t e n s i o n S li d e s , E a s y C lo s e p a ir 1 0
A E 2 2 2 2 " F u ll E x t e n s i o n S li d e s , E a s y C lo s e p a ir 1 0
F 6 6 " F u l l E x t e n s i o n S l id e s p a ir 1 0
F 8 8 " F u l l E x t e n s i o n S l id e s p a ir 1 0
F 1 0 1 0 " F u ll E x t e n s i o n S li d e s p a ir 1 0
F 1 2 1 2 " F u ll E x t e n s i o n S li d e s p a ir 1 0
F 1 4 1 4 " F u ll E x t e n s i o n S li d e s p a ir 1 0
F 1 6 1 6 " F u ll E x t e n s i o n S li d e s p a ir 1 0
F 1 8 1 8 " F u ll E x t e n s i o n S li d e s p a ir 1 0
F 2 0 2 0 " F u ll E x t e n s i o n S li d e s p a ir 1 0
F 2 2 2 2 " F u ll E x t e n s i o n S li d e s p a ir 1 0
B 1 2 1 2 " B lu m o t i o n p a ir s / lo c k s - re g u la r p a ir 6
B 1 4 1 4 " B lu m o t i o n p a ir s / lo c k s - re g u la r p a ir 6
B 1 6 1 6 " B lu m o t i o n p a ir s / lo c k s - re g u la r p a ir 6
B 1 8 1 8 " B lu m o t i o n p a ir s / lo c k s - re g u la r p a ir 6
B 2 0 2 0 " B lu m o t i o n p a ir s / lo c k s - re g u la r p a ir 6
B 2 2 2 2 " B lu m o t i o n p a ir s / lo c k s - re g u la r p a ir 6
B H D 2 0 2 0 " B lu m o t i o n p a ir s / lo c k s - H D p a ir 6
B H D 2 2 2 2 " B lu m o t i o n p a ir s / lo c k s - H D p a ir 6
B L U J I G B lu m o t io n T a n d e m B o re T e m p l a t e e a 1
P G T W W h it e P re g lu e d E d g e T a p e R o l l
P G T M H a rd R o c k M a p le P re g lu e d E d g e T a p e R o l l
P G T A L D A ld e r V e n e e r P r e g u le d E d g e T a p e R o l l
P G T C H Y C h e r r y V e n e e r P re g lu e d E d g e T a p e R o l l
P G T M P L M a p le V e n e e r P r e g lu e d E d g e T a p e R o l l
P G T O A K O a k V e n e e r P re g lu e d E d g e T a p e R o l l
P G T W A L W a ln u t V e n e e r P re g lu e d E d g e T a p e R o l l
E T E W E N 0 . 5 m m E c h o Q t r W e n g e V e n e e r R a w E d g e T a p e R o l l
E T E W A L 0 . 5 m m E c h o Q t r W a l n u t V e n e e r R a w E d g e T a p e R o l l
E T E Z E B 0 . 5 m m E c h o Q t r Z e b r a w o o d V e n e e r R a w E d g e T a p e R o l lE T E R W O 0 . 5 m m E c h o R if t C u t W h it e O a k V e n e e r R a w E d g e T a p e R o l l
E T E W E N 2 2 m m E c h o Q t r W e n g e V e n e e r R a w E d g e T a p e R o l l
E T E W A L 2 2 m m E c h o Q t r W a ln u t V e n e e r R a w E d g e T a p e R o l l
E T E Z E B 2 2 m m E c h o Q t r Z e b ra w o o d V e n e e r R a w E d g e T a p e R o l l
E T E R W O 2 2 m m E c h o R if t C u t W h it e O a k V e n e e r R a w E d g e T a p e R o l l
H 1 1 S O F T 1 1 0 F u ll O v e r la y S o f t C lo s e p a ir 1 0 0
H 1 0 1 1 0 C l ip -O n I n s e t H in g e s p a ir 1 0 0
H 1 1 1 1 0 C l ip -O n F u l l O v e r l a y H in g e p a ir 1 0 0
H 1 2 1 1 0 C l ip -O n H a l f O v e r la y H i n g e p a ir 1 0 0
H 1 7 1 7 0 C l ip -O n F u l l O v e r l a y H in g e p a ir 5 0
H 4 5 4 5 C lip - O n H in g e p a ir 1 0 0
H N 4 5 N e g a t i v e 4 5 C l ip -O n H in g e p a ir
S O F T C L O S E S o f t c l o s e s c re w o n d a m p e r e a 2 0 0
H F 1 1 1 0 F a c e F r a m e H i n g e p a ir 1 5 0
H L S L a s y S u s a n H i n g e w / M o u n t in g P la t e s p a ir 1 0 0
H P N 3 0 " B ra s s P i a n o H I n g e e a
K 2 8 2 8 " k i d n e y l a zy s u s a n D O W E L 8 m m D o w e l s fo r F e r r a r i H i n g e s
R 2 8 2 8 " r o u n d l a zy s u s a n C S B 4 1 1 1 0 " X 8 0 T C h o p s a w B l a d e
C A P W w h i te s t i c k y s c r e w c a p C S B 4 3 1 1 0 " X 5 0 T C o m b i n a ti o n B l a d e
C A P M m a p l e s t i c k y s c r e w c a p C S B 4 4 5 1 0 " X 8 0 T T r i p l e C h i p B l a d e
C A P M P L w h i te v e n e e r s c r e w c a p D B 5 5 m m B r a d P o i n t D r i l l
C A P O A K m a p l e v e n e e r s c r e w c a p O IL 5 0 0 M L M i n e r a l O i l
B M P R u b b e r D o o r B u m p e r s W A M E L S W i l s o n a r t m e l a m i n e g l u e 4 7 3 M L
S H F S h e l f S u p p o r t C l i p s W A 1 0 S W i l s o n a r t W A 1 0 B l u e 4 7 3 M L
S P R 1 " S l i d e S p a c e r S e t W A 1 0 M W i l s o n a r t W A 1 0 B l u e 3 .7 8 L
H S M 2 0 5 0 0 M 4 X 2 0 r o b e r ts o n W A 1 0 L W i l s o n a r t W A 1 0 B l u e 1 8 .9 L
H S M 2 5 5 0 0 M 4 X 2 5 r o b e r ts o n FO A M 3 /3 2 x4 8 x7 5 0 ' 1 /2 "P E R F
H S M 3 5 5 0 0 M 4 X 3 5 r o b e r ts o n W R A P B u b b l e W r a p 4 8 '' x 2 5 0 "
H S M 4 0 5 0 0 M 4 X 4 0 r o b e r ts o n C C 4 8 4 8 " x 2 5 0 ' c o r r u g a te d c a r d b o a r d
H S I 7 8 5 0 0 # 8 X 7 /8 p h i l l i p s C C 3 0 3 0 " x 2 5 0 ' c o r r u g a te d c a r d b o a r d
H S I 1 5 0 0 # 8 X 1 p h i l l i p s S H IM S B u n d l e ( 1 2 p c s ) 8 " C e d a r S h i m s
H S I 1 2 5 5 0 0 # 8 X 1 1 /4 p h i l l i p s S H IM L A R G E B u n d l e ( 1 0 0 p c s ) 8 " C e d a r S h i m s
H S I 1 5 0 5 0 0 # 8 X 1 1 /2 p h i l l i p s S O FT C L O S E S o ft c l o s e s c r e w o n d a m p e r
S C W C # 6 - 5 /8 ” S c r e w 1 0 0 /p k W A 7 0 0 A W i l s o n a r t 7 0 0 A C o n ta c t 4 7 0 .6 g
S C S P 1 3 m m e u r o s c w 5 0 /p k
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
Com pany: Date: PO#Phone: Fax: Pick Up P Ship P Via:
Job Reference: Ship Addre ss:Site Address: City: PROV:
W= White Melamine M=HR Maple Melam ine
Code Qty. W Qty. M Item Goes With
SG Stove Gable UTB (308mm )SG1 Stove Gable One UTB (308mm )
SGS Stove Gable Special UTB (308mm )UG Upper Gable UTB (308mm )
UG1 Upper Gable One UTB (308mm )UGS Upper Gable Special UTB (308mm )
DUG Douglass Upper Gable MWB (404m m)
DGS Douglass Gable Special MWB (404m m)MG Microwave Gable MWB (404m m)
MG1 Microwave Gable One MWB (404m m)MGS Microwave Gable Special MWB (404m m)
VG Vanity Gable VB (518m m)VGS Vanity Gable Special VB (518m m)
FG Fridge Gable LB (596mm )FG1 Fridge Gable One LB (596mm )
FGS Fridge Gable Special LB (596mm )
LG Lower Gable LB (596mm )LGS Lower Gable Special LB (596mm )
PG Panty Gable LB (596mm )PGS Pantry Gable Special LB (596mm )
DUTB Dril led Upper Top/Bottom US or UTBDMWB Dril led Microwave Bottom MWB
CUS 22" Corner Upper Shelf (308 gable) CUB & CN(#)*CUB 22" Corner Upper Bottom (308 gable) 308 W gables
CS1 26" Corner Upper Shelf (308 gable) CB1 & CN (#)*CB1 26" Corner Upper Bottom (308 gable) 308 W gables
DCS 26" Corner Upper Shelf (404 gable) CB1 & CN (#)*DCB 26" Corner Upper Bottom (404 gable) 404 W gables
CN1* Corner Shelf Gable One (CUS/CS1/DCS) 800 H gables
CN2* Corner Shelf Gable Two (CUS/CS1/DCS) 928 H gablesCN3* Corner Shelf Gable Three (CUS/CS1/DCS) 1088 H gables
CLB Corner Lower B ottom (Round Lazy Susan) 596 W gablesCL90 L Shaped Lower Bottom (Kidney Lazy Susan) 596 W gables
MDWMPL Drawer Rail 3/4" Maple Veneer (3mm edge)
DSR Drawer Rail Sm all ( 5/8" R abbet- bott om f lush) 5/8" bottoms
DMR Drawer Rail Medium ( 5/8" R abbet- bott om f lush) 5/8" bottoms
DLR Drawer Rail Large ( 5/8" R abbet- bott om f lush) 5/8" bottoms
DX R Drawer Rail XLarge ( 5/8" R abbet- bott om f lush) 5/8" bottoms
D4D Drawer Rail Sm all ( 5/8" Da do up 12 mm /B LU M) 5/8" bottoms
D5D Drawer Rail Medium ( 5/8" Da do up 12 mm /B LU M) 5/8" bottoms
D7 D Drawer Rail Large ( 5/8" Da do up 12 mm /B LU M) 5/8" bottoms
D9D Drawer Rail XLarge ( 5/8" Da do up 12 mm /B LU M) 5/8" bottoms
D12D Drawer Rail File ( 5/8" Da do up 12 mm /B LU M) 5/8" bottoms
MDS Drawer Rail Sm all
MDL Drawer Rail Large MDX Drawer Rail XLarge
US Upper Shelf (UTB- 20m m fo r Screw R ail & Ba cker) 308 W gablesUTB Upper Top Bottom 308 W gables
MWB Microwave B ottom 404 W gables
VB Vanity Bottom 518 W gablesLS Lower Shelf (L B- 20m m fo r Screw R ail & Ba cker) 596 W gables
LB Lower Bottom 596 W gablesSB Sink Bottom
Size HxW(Imp.)
15 1/8 x 12 1/8
Size HxW(Metric)
384 x 308
31 1/2 x 12 1/8 800 x 308
36 1/2 x 12 1/8 928 x 308
20 1/8 x 12 1/8 512 x 308
26 1/2 x 12 1/8 672 x 308
42 7/8 x 15 7/8 1088 x 404
15 1/8 x 15 7/8 384 x 404
42 7/8 x 12 1/8 1088 x 308
36 1/2 x 15 7/8 928 x 404
27 3/4 x 20 3/8 704 x 51826 7/16 x 20 3/8 672 x 518
20 1/8 x 15 7/8 512 x 40426 1/2 x 15 7/8 672 x 404
26 1/2 x 23 1/2 672 x 59631 1/2 x 23 1/2 800 x 596
15 1/8 x 23 1/2 384 x 59620 1/8 x 23 1/2 512 x 596
92 x 23 1/2 2336 x 596
96 x 12 1/8 2440 x 308
30 1/4 x 23 1/2 768 x 596
80 5/8 x 23 1/2 2048 x 596
22 x 22 559 X 559
25 3/4 x 25 3/4 651 X 651
97 x 15 7/8 2440 x 404
21 5/8 x 21 5/8 551 x 551
26 x 26 661 X 660
30 1/4 x 6 768 X 152
26 x 26 660 X 660
25 3/4 x 25 3/4 652 X 651
31 1/2 x 31 1/2 800 x 800
36 x 36 914 x 914
35 1/4 x 6 896 X 152
36 1/4 x 6 1056 X 152
96 x 5 2440 x 127
96 x 6 3/4 2440 x 170
96 x 12 2440 x 304.8
96 x 4 2440 x 100
96 x 5 2440 x 12796 x 6 3/4 2440 x 170
96 x 9 2440 x 230
96 x 4 2440 x 100
96 x 20 3/8 2440 x 518
96 x 9 2440 x 23096 x 9 2440 x 308
96 x 6 3/4 2440 x 170
96 x 11 3/8 2440 x 288
96 x 4 2440 x 100
96 x 15 7/8 2440 x 404
96 x 9 2440 x 230
96 x 12 1/8 2440 x 308
96 x 22 5/8 2440 x 576
96 x 25 1/2 2440 x 64896 x 23 1/2 2440 x 596
Cabinet Components Order Form35
Reference:
Site Address:
Pick - up Ship Via:
Ship Address:
Company:
Ordered by:
Phone:
Fax:
Po:Date:
City: Prov:
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
S4S, S4F, S3R, Moulding Order Form36
S4F & S3R
Moulding Order Form Mouldings
S 4 F S 3 R
Thickness Width (net) LF Wood Type Wood Type Board Feet Required Wood Type Board Feet Required
Knotty Alder Cherry
Clear Alder White Hard Maple
Oak Walnut
QTR Sawn Oak Other (Specify):
Style Quantity(LF) Wood Type Style Quantity(LF) Wood Type Style Quantity(LF) Wood Type
AS - 01 CR - 60 PN - 06
AS - 07 CR - 65 PN - 08
AS - 08 CR - 70 PN - 09
AS - 14 CR - 80 PN - 10
AS - 16 CR - 85 PN - 16
AS - 17 CR - 90 PN - 46
AS - 40 CR - 95 VA - 01
AS - 75 CS - 08 FLU (8')
AS - 975 CS - 11 SHBALD
CE - 01 CV - 01 SHBCHY
CR - 01 CW - 02 SHBMPL
CR - 02 CW - 03 SHBOAK
CR - 04 CW - 04 SHBPOP
CR - 05 CW - 20 SHBLALD
CR - 06 CW - 21 SHBLCHY
CR - 35 OC - 02 SHBLMPL
CR - 45 PL - 02 SHBLOAK
CR - 55 PN - 01 SHBLPOP
AL DE R CH ER RY
CO DE SI Z E NE T Q T Y / L F T CO DE SIZ E NE T Q T Y / L F T
1X 2AL D 1 x2 3 /4" x 1 -1/2" 1X 2C HY 1x 2 3 /4" x 1 -1 /2"1X 3AL D 1 x3 3 /4" x 2 -1/2" 1X 3C HY 1x 3 3 /4" x 2 -1 /2"1X 4AL D 1 x4 3 /4" x 3 -1/2" 1X 4C HY 1x 4 3 /4" x 3 -1 /2"1X 6AL D 1 x6 3 /4" x 5 -1/2" 1X 6C HY 1x 6 3 /4" x 5 -1 /2"1X 8AL D 1 x8 3 /4" x 7 -1/4" 1X 8C HY 1x 8 3 /4" x 7 -1 /4"1X 10 AL D 1x 1 0 3 /4" x 9 -1/4" 1X 10 CHY 1x 10 3 /4" x 9 -1 /4"
M AP L E O AKCO DE SI Z E NE T Q T Y / L F T CO DE SIZ E NE T Q T Y / L F T
1X 2M P L 1 x2 3 /4" x 1 -1/2" 1X 2O AK 1x 2 3 /4" x 1 -1 /2"1X 3M P L 1 x3 3 /4" x 2 -1/2" 1X 3O AK 1x 3 3 /4" x 2 -1 /2"1X 4M P L 1 x4 3 /4" x 3 -1/2" 1X 4O AK 1x 4 3 /4" x 3 -1 /2"1X 6M P L 1 x6 3 /4" x 5 -1/2" 1X 6O AK 1x 6 3 /4" x 5 -1 /2"1X 8M P L 1 x8 3 /4" x 7 -1/4" 1X 8O AK 1x 8 3 /4" x 7 -1 /4"1X 10 M PL 1x 1 0 3 /4" x 9 -1/4" 1X 10 O AK 1x 10 3 /4" x 9 -1 /4"
Door Order Form37
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
Standard DoorsClient:______________________________________________ Contact:______________________________
M DF Doors
Call #:_________________________Fax #:_________________________Reference:_______________________
Site Address:________________________________________PO#_________________ Pickup / Delivery
Delivery Address:________________________________________________ Ship Via?:_________________
Woodtype:____________________________ Drill Offset: 5mm Offset / Custom Offset :___________
Doors Drawers: Full size Rail
Style:________________ Edge Profile:__________ Style:_____________ Edge Profile:__________
Stile Width:___________ Rail Width:___________ Stile Width:___________ Rail Width:___________Notes Notes
M iter Doors L R (Frame, F4, F6? DP/TP, VP/BP) (Side-by-side, VP/BP)
Wood Panels
Drawers: Slabs or Reduced Rail
Style:_____________ Edge Profile:__________
Stile Width:___________ Rail Width:___________Notes
(Side-by-side, VP/BP)
Edge Prof iles Edge Prof iles
Width
Qty Height Width
Qty
Drill
Drill Style: STD __ A __ D __
Height
Qty Height Width
Cathedral
Double EyebrowDouble Cathedral Frame - F9Frame F8Frame - F6
Square
Frame - F4Frame - F
Half Eyebrow-RHalf Eyebrow-LEyebrowHalf Cathedral-RHalf Cathedral-L
Door Shape
Stile/Rail Panel Drawer Options
Outside Edge Profile
Other Options
Vinyl & Groove?
Drill Style?: Std. A D Offset:____mm
Wood Type? ____________
Standard Door Selection Sheet
Customer O.K._________________________________
Quote/Order #____________________
38
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
3/8” Bead
#5
Flat Cove
#10
1/4” Lip
#8
3/8” Lip
#7
1/4” Bead
#6
3/8” Round
#4
1/4” Round
#3
1/4” Chamfer
#2
1/4” Cove
#1
Standard
#0
Finger Pull
#12
1/8” Round
#13
MW Ogee
#16
1/8” Chamfer
#14
Flat Ogee
#11
Sub Zero
#66#31
Cove Finger Pull1/8 Notch
#25
1/16’ Round
#18
1/8” Lip
#17
Large Radius
#26
Back Rabbet
#9
1/2” Round Over
#27
Slab
Full Size Rail
Reduced Rail
Reverse
Soft
Bevel
Pearl
Multiwood
Cove
Ply
V-Grooved
Beaded
Yes No
Shaker Pillow
Ogee
Cove V-Groove Through
Bevel Shaker
Lip Stretch
Mitered Door Selection Sheet
Stile/Rail
ML - Mu l l i ons no t ava i l ab le fo r f rames .
MX - A l l f r ame op t i ons and a l l ou ts ide p ro f i l es ava i l ab le .
MR - A l l f r ench f rame op t i ons ava i l ab le .
MH - Mu l l i ons no t ava i l ab le fo r f rames .
MN - A l l f r ench f rame op t i ons ava i l ab le .
MT - A l l f r ench f rame op t i ons ava i l ab le .
Frame - F9Frame F8Frame - F6Frame - F4Frame - FSquare
Other Options
Door ShapeQuote/Order #____________________
Outside Edge Profile - Only Available for MX
39
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
Vinyl & Groove?
Drill Style?: Std. A D Offset:____mm
Wood Type? ____________
Customer O.K._________________________________Yes No
Sub Zero Ply
#77
3/8” Bead
#5
Flat Cove
#10
1/4” Lip
#8
3/8” Lip
#7
1/4” Bead
#6
3/8” Round
#4
1/4” Round
#3
1/4” Chamfer
#2
1/4” Cove
#1
Standard
#0
Finger Pull
#12
1/8” Round
#13
MW Ogee
#16
1/8” Chamfer
#14
Flat Ogee
#11
#31
Cove Finger Pull1/8 Notch
#25
1/16’ Round
#18
1/8” Lip
#17
Large Radius
#26
Back Rabbet
#9
1/2” Round Over
#27
Panel Drawer Options
Slab
Full Size Rail
Reduced Rail
Reverse
Soft
Bevel
Pearl
Multiwood
Cove
Ply
V-Grooved
Beaded
MDF Door Selection Sheet
Other Options
Quote/Order #____________________
Outside Edge Profile
MDF Door Profile Square Shape Only MDF Door Profile
Door Shape
Drawer Options
40
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816
Cathedral Double EyebrowDouble Cathedral
Frame - F9Frame F8Frame - F6
Square
Frame - F4Frame - F
Eyebrow
M32
M96
M95
M86
M70
M94
M92
M89
M38
M34
M11 - SquareM12 - CathedralM15 - Eyebrow
M13 - SquareM14 - CathedralM17 - Eyebrow
M40 - SquareM41 - CathedralM42 - Eyebrow
M01 - SquareM02 - CathedralM09 - Eyebrow
M03 - SquareM04 - CathedralM10 - Eyebrow
M05 - SquareM06 - CathedralM16 - Eyebrow
M07 - SquareM08 - CathedralM18 - Eyebrow
Vinyl & Groove?
Drill Style?: Std. A D Offset:____mm
Customer O.K._________________________________Yes No
Outside Bead
#23
3/8” Bead
#5
Flat Cove
#10
1/4” Lip
#8
3/8” Lip
#7
1/4” Bead
#6
3/8” Round
#4
1/4” Round
#3
1/4” Chamfer
#2
1/4” Cove
#1
Standard
#0
Finger Pull
#12
1/8” Round
#13
MW Ogee
#16
1/8” Chamfer
#14
Flat Ogee
#11
Sub Zero
#66
Cove Finger Pull
#31
1/16’ Round
#18
1/8” Lip
#17
Large Radius
#26
Back Rabbet
#9
1/2” Round Over
#27
1/8 Notch
#25
Slab
Full Size Rail
Reduced Rail
Dovetail Drawer Boxes41
Scoop Handle Types for Internal Drawers
mm mm
57 mm 2 1/4 2.25" 57 mm 2 1/4 2.25"
85 mm 3 3/8 3.375" 85 mm 3 3/8 3.375"
105 mm 4 1/8 4.125" 105 mm 4 1/8 4.125"
140 mm 5 1/2 5.5" 140 mm 5 1/2 5.5"
175 mm 6 7/8 6.875" 150 mm 5 15/16 5.9375"
230 mm 9 1/16 9.0625" 175 mm 6 7/8 6.875"
261 mm 10 1/4 10.25" 230 mm 9 1/16 9.0625"
261 mm 10 1/4 10.25"
inches inches
MAPLE , HARD WHITE, 15mm( 11mm,3/8" bottom)
STANDARD DRAWER HEIGHTS
BIRCH UV, 16mm ( 6.35mm,1/4" bottom)
Example Pricing
BUILT FOR BLUE MOTION TAMDEM SLIDES, BACK NOTCHED, WITH CLIPS INSTALLED.
ICW DEPTH HEIGHT Solid Solid Baltic Baltic Solid MapleBirch/Melamine Birch/Plywood 6mm 12mm Plywood
8 x 20 x 4 1/8 39.97$ 47.24$ 58.16$ 60.28$ 62.17$ 8 x 20 x 6 7/8 47.43$ 54.70$ 67.00$ 67.91$ 75.68$
16 x 22 x 2 1/4 38.25$ 46.09$ 55.38$ 57.86$ 61.80$ 16 x 22 x 3 3/8 43.19$ 51.03$ 59.46$ 61.98$ 68.15$ 16 x 22 x 4 1/8 45.33$ 53.17$ 62.17$ 65.60$ 70.91$ 16 x 22 x 5 1/2 51.74$ 57.75$ 66.25$ 69.30$ 78.06$ 16 x 22 x 6 7/8 54.84$ 62.68$ 72.24$ 74.30$ 87.65$ 16 x 22 x 9 1/16 71.92$ 79.76$ 77.08$ 79.25$ 106.36$ 16 x 22 x 10 1/4 77.25$ 85.09$ 80.77$ 84.34$ 118.62$
32 x 22 x 4 1/8 54.50$ 63.41$ 69.23$ 75.04$ 85.72$ 32 x 22 x 6 7/8 67.30$ 76.19$ 81.26$ 85.47$ 107.65$ 32 x 22 x 9 1/16 86.97$ 95.86$ 87.22$ 91.80$ 132.38$
PH:(403)279-7789 www.multiwood.com FAX:(403)279-2816