CATALOGUE ABB PRODUCTS3.imimg.com/data3/FB/DM/MY-5827975/lightning-protection...CATALOGUE ABB PRODUCTS Shri Sharafat Ali, Lucky India Power Solutions 572, Gulshan Colony, Behind OBC

CATALOGUE

ABB PRODUCTS

Shri Sharafat Ali,Lucky India Power Solutions

572, Gulshan Colony, Behind OBC Bank, NearRoadways Bus Stand

Muradnagar, Dist. Ghaziabad-201206, UP, India

Built-in safety and reliability

Line Protection Devices

ABB ñ a global leaderABB is a global leader in Power and Automation technologies that enable utilityand industry customers to improve their performance while loweringenvironmental impact. The ABB Group operates in around 100 countries and hasa strong presence in the South Asian region, spanning several decades. ABBoffers customers a comprehensive array of standard products for variousapplications, helping to optimise resources, reduce energy costs, boostproductivity and increase competitiveness.

System proM

System proM

System ProM is a modular system developed byABB which, is capable of meeting the requirementsof the most modern and up-to-date installations forlow voltage applications.

The system is based on two main criteria:

� Complete functionality: Wide range of deviceswhich leads to increased safety for the user andgreater diversification in command and loadmanagement

� Optimum sizing: The modular structure allowsthe internal structure of the switchboard to beused in the best possible way, reduces wiringoperations and enhances functionality andaesthetics of the switchboards

System proM offers a wide range of devices forbasic functions like protection, command,measure and load management whichcharacterise the low voltage electrical applications.

Protection forms the basis of system proM whichcomprises of MCBs, RCCBs, RCBOs and a host ofother modular devices. These miniature modulardevices are technologically advanced, enable speedyinstallation and simplify maintenance.

Each device in the System proM has been designedin accordance with strict criteria for safety andfunctionality to guarantee the maximum operatingsafety even in the difficult environment conditions.

Miniature Circuit Breakers ( MCBs) - S270 & S260 seriesType ‘C’ acc. to IEC60898, IS8828-10kA and Type ‘D’ acc. to IEC60898-10kA

Safety

ABB MCBs have finger-touch proof terminalsconforming to IP20 degree of protection thuspreventing any electrical shock by accidentaltouch to any live part. The housing is self-extinguishing conforming to V0 degree with1.6mm thickness.

Tropicalisation

The S2 range of MCBs have been designed inaccordance with strict criteria for safety andfunctionality to ensure trouble free operation formany years in highly humid environment (as perIEC 68.2, DIN 50016)

DC application

S270 range of MCBs can be used in DC circuitswith voltages up to 60V ... (single pole), and upto 110V ... (double pole).

The S280 UC range can be used up to 220 V ...for single pole or up to 440 V ... for 2 pole.

Other applications

ABB has MCBs to cater to a wide range ofrequirements, including various tripping curveslike B, C, D, K, Z and different fault levels like4.5KA, 6KA, 10KA, 15KA, 25KA with voltagelevels up to 1000V. A specialized range of MCBscan also be offered for protection of thesemiconductor devices. For the distributionnetwork circuits, our MCBs with variable currentsetting can be offered which provides theperfect coordination with the upstream anddownstream installations.

Low watt loss

Efforts towards power loss limitations inelectrical equipment are gaining importance theworld over. The power loss per pole of the S2range of MCBs is much lower than the valuesstipulated by IEC 60898 standards.

Introduction

MCBs are used to protect circuits against overload and short-circuit current. They are importantdevices for reliable and safe operating of installations. The S2 range of MCBs are available in 1-pole, 1-pole + Neutral, 2-pole, 3-pole, 3-pole + Neutral, and 4-pole configurations with breakingcapacity of 10kA in accordance with IEC 60898 and IS8828

The S2 range of MCBs complies to international standards and regulations. These MCBs arecurrent limiting types and utilise the state-of-the-art “hammer trip” principle. Each pole is fitted withtwo different tripping devices operating on a trip free switching mechanism:

• The delayed thermal trip for protection against overload and

• The quick acting electromagnetic trip for protection against short-circuits

Features

• Breaking capacity - 10kA• Tripping characteristics - B,C,D,K & Z curve• 17 different ratings with some unique ratings

like 3A, 8A & 13A• Higher rating of MCB - 80A & 100A in S280

series• All round protection against contact with live

parts in accordance with DIN VDE 106 part 100• Delivered with open box terminals ,

captive screws and lower dual functionterminal ready for busbar connection

• Dual function terminals enablesimultaneous connection of busbar andcables without additional connectionpieces

• Cross wiring possible with solid roundconductor up to 10mm2

• Positioning of the MCB on the DIN-ral nowpossible before snapping on, as themounting plate is on the lower side

• High short-circuit switching capacity• Long endurance life• Low watt loss

Technical data

Miniature Circuit Breakers ( MCBs) - S270 & S260 seriesType ‘C’ acc. to IEC60898, IS8828-10kA and Type ‘D’ acc. to IEC60898 10kA

Standards IS8828 / IEC60898 and IEC60947/2 (for K & Z curve MCB)

Breaking capacity 10kA

Tripping characteristics B, C, K & Z curve ; D curve for S260

Dimensions of single pole 90x17.5x68 (HxWxD)

Terminals IP20, housing material with the maximum self-extinguishing degree(V0 level with 1.6 mm thickness)

No. of poles 1, 2, 3, 4, 1+NA, 3+NA ; 1, 2, 3, 4 pole for S260

Rated current In [A] 0.5…63

Rated voltage Un [V] Single pole: 230 / 400 V~, Multi-pole 400 V~

Max. operating voltage UBmax [V] AC: Un + 10 % acc. to UL 1077 and CSA 22.2: 480V~DC: 1-pole 60 V..., 2-pole 110 V...

Min. operating voltage UBmin [V] 12 ~, 12...

Frequency 50...60 Hz

Degree of protection IP20, when built in into distribution board: IP40

Dimension of single pole 90x17.5x68 (HxWxD)

Terminal size 25 sq. mm

Housing Moulded plastic group I

Switching lever Moulded plastic group II black, sealable

Mechanical life 20,000 operations

Service life at rated load In < 32 A: 20 000 operationsIn > 32 A: 10 000 operations

Tripping mechanism Trip free mechanism

Mounting snap-on fixing on standard profile rails orscrew fixing by means of mounting plate

Connections Box terminals on top and combi-box terminals on bottom, safeagainst unintentional touch acc. to DIN VDE 0106 part 100.Suitable for solid or flexible conductors from 0.75 mm2 to 25 mm2(max.16 mm2 when a max. 3mm busbar is connected; from0,75mm2 with casing and from 1.5 mm2 without)

Tightening torque 2 Nm

Storage temperature [0C] Tmax + 700, Tmin – 40

0

Ambient temperature [0C] Tmax + 550, Tmin – 25

0

Higher rating of MCBs 80A and 100A

Energy limitation Class 3 limitation

Watt loss Low watt loss

Shunt trip S2-A

These are used for remote tripping of the M.C.B. by applying acontrol voltage. The shunt trip contains a relay with an integratedcontact, that opens after the M.C.B. has tripped and interrupts thecontrol voltage of the relays. This prevents the flow of current incase of substained control voltage.

Mechanical interlocks

It automatically releases the relative circuit-breaker when the panelof the electric switchboard is opened or removed. The release isonly mechanical and acts on the release elements of the circuit-breakers.

Accessories for MCB

The S2 range of circuit-breakers are supported by a whole groupof auxiliary elements with many functions and configurations. Theseinclude auxiliary contacts, shunt trips, undervoltage releases, signalcontacts, and mechanical interlocks.

These accessories improve the performance of the circuit-breakerand enables innovative and integrated solutions to be used in everyinstallation.

Auxiliary contact S 2-H..

The auxiliary contact can be built on subsequently to the M.C.B.The switching position of the auxiliary contact depends on theposition of the M.C.B. (ON-OFF). Because of coupling to theswitching mechanism of the M.C.B. the auxiliary contact offers atrip-free feature.

The auxiliary contact can be delivered either with screw or plug-inconnections, the auxiliary contact with 3 potential free contactsonly in screw-in connection.

Signal contact S 2-S

It signals the tripping caused by overload earth fault or short circuitcurrent however, there is no signal when the M.C.B. is switchedOFF manually. With a red handle which allows resetting of the tripsignal without the M.C.B. being switched on. It has also a testbutton for checking the control circuit without interrupting the maincircuit.

Undervoltage releases S 2-UA..

These are used for remote tripping of the M.C.B. Only in case ofsubstained voltage the relay allows to switch on the M.C.B. Theundervoltage release trips the M.C.B. if the supply voltage isinterrupted or switched off (suitable for emergency off circuits).

Description TypeReference

Aux. contact block 1NO+1NC S2H11

Aux. contact block 2NC S2H02

Aux. contact block 2NO S2H20

Shunt trip mechanism 12-64AC S2-A112-110DC

Shunt trip mechanism 125-415AC S2-A2200DC

Under voltage tripping mechanism (24 VAC/DC) S2-UA 24





Signalling contact + Auxiliary contact S2-S/H

Padlock adaptor SA1

Padlock adaptor with lock and key SA3

The ABB range of RCCBs give protection against earth leakage incase of direct and indirect contact to live parts. RCCBs are usedfor protection of earth leakage. To have short circuit and overloadprotection these RCCBs are connected in series with a MCB or fuse.

'AC' type RCCBs (known as ELECTROSTOP) is used for detectionof alternate leakage current.

'A' type RCCBs (known as VARISTOP) is used for detection ofalternate/pulsating leakage current with DC components.

Thanks to an electronic circuit able to distinguish betweentemporary leakage caused by a disturbance and permanent leakagecaused by a fault, the new 'AP' type RCCBs resists a currentimpulse from 8/20µs from and 3000A peak.

Salient Features

� Conditional short circuit current - 6kA

� Type: AC/A/AP

� Higher rating RCCBs - 80A, 100A

� Mounting position: Any direction

Residual Current-operated Devices (RCDs)RCCBs ñ F360/ F370 range Conforms to IEC61008

Technical data

Range F 362 F 364 F 372 F 374

Standard IEC 61008

Type (wave form of leakage current detected) AC/AP AC/AP A/AP A/AP

Rated current In [A] 25,40,63 25,40,63 16,25,40,63 25,40,63

Poles 2P 4P 2P 4P

Rated voltage Ue [V] 230/400 230/400 230/400 230/400

Max. operating voltage of test button [V] 254

Min. operating voltage of test button [V] 110

Rated frequency [Hz] 50..60 50..60 (50..400 x F370 400Hz)

Breaking capacity [kA] 6

Rated sensitivity I∆n [A] 0.01-0.03-0.1-0.3-0.5 0.03 0.01-0.03- 0.1-0.3-0.5 0.03Tripping threshold AC type 0.5..1 I∆n 0.5..1 I∆n

A type 0.11..1.4 I∆n 0.11..1.4 I∆nElectrical life 10000

Mechanical life 20000

Equipment protection housing IP4Xdegree terminals IP2X

Ambient temperature [0C] -25..+55

Storage temperature [0C] -40..+70

Terminal size upper/lower per cable [mm2] 25/25

DimensionsH90xD68xW 2P In

Technical data

Residual Current-operated Devices (RCDs)RCBOs ñ DS971 & DS674 range Conforms to IEC61009- 10kA

The DS971 range provides protection solution for all types ofsingle-phase circuits in modern installations. It is characterized by aninnovative design with a single red/green two colour operating leverand residual current trip signal on the front of the apparatus.

The DS971 range satisfies all protection requirements in twomodules, offering the opportunity of choosing between four differentsensitivities (10-30-100-300 mA) and for each of these, thepossibility of choosing between 'A' type or 'AC' type residualcurrent protection with breaking capacity of 10kA. The 'C'characteristic is available with rated current from 6A to 40A.

The closing velocity of the contacts is independent from the rotationvelocity of the toggle. This is ensured by a trip mechanism patentedby ABB.

'AC' type RCBO is suitable for all installationswhere there may be loads with alternate faultcurrents.

'A' type is designed to be used in case ofalternate and pulsating DC fault currents.Their use is typical in installations whereusers are equipped with electronicdevices meant to rectify currents orother physical variables.

DS 971 DS 674

Reference Standards IEC 61009

Type (wave form of leakage current detected) AC, A AC

Rated current In [A] 6

Isolators ñ E240 & E270 SeriesConditional Short Circuit Capacity 10kA for E240 and 25kA for E270 acc.to IEC 60947-3

Product range� 16 – 125 A, 1, 2, 3 & 4 pole

version� AC 23 duty for 80A & 100A� AC 22 duty upto 63A & for 125A

ABB’s technologically advanced SPDs are used to protect the equipment or connected devices from indirect lightningand overvoltage surges. These devices are used to limit transient overvoltages and diverts surge currents harmlessly tothe ground.

Surge Protection Devices

Mono Block Units

Analogue Time Switches (ATS) - ATS-1, ATS-1R, ATS-7RATS times switches can be used to control the opening and closing of circuits according to a daily or weeklytime schedule, or to manually set operation permanently on ON/OFF. Installation of ATS electromechanic timeswitches is particularly appropriate in all situations where operation of loads needs to be programmedaccording to a daily or weekly time schedule.

Digital Time Switches (DTS) - DTT-1/1, DTT-7/1, DTT-7/2Installation of a digital time switch in a system is particularly useful in those situations where the programming ofthe operating schedule of the loads needs to be sufficiently flexible to permit variations according to time andday of the week or month.

Twilight Switches - TWS-1ABB twilight switches turn on the lighting in an installation when the daylight level measured by a special sensorfalls below a set threshold. They are especially useful in places accessible to the public, where they encouragepower savings and increase the deterrent action of lighting in preventing crime and vandalism. Delayedswitching also prevents unnecessary on/off switching in case of sudden changes in the daylight level.

Timers, Twilight Switches, Photo Sensors

TWS Type

Technical data

Salient features� Combined box terminals make it possible to connect individual

conductors and busbars simultaneously� Captive screws with recessed/slotted head� Quick fasteners which are easily accessible, detachable from

below

DTT Type

ATS Type

Pluggable Units

Switching capacity 1.25 In; 1.1 Un; cosj=0.3

E240: AC 21A acc. to IEC 60947-3, E270:AC 22A acc. to IEC 60947-3Min. contact rating 6 V; 0.5 mA; 0.03 VAShort-circuit withstand capacity E 240 = 10 kAeff, E 270 = 25KAeffRated voltage 240/400/415 VAC, 50/60 Hz (E 240 cannot be used for DCI)Connection capacities E 240 to 25 mm2, E 270 to 50 mm2

Storage temperature –40 0C to + 70 0CAmbient temperature –25 0C to + 55 0CShock protection 30g at least 2 impacts, shock duration 13 ms

Salient Features� Safety reserve indication� Type I, II & III and telecom & data line SPD’s as per IEC61312� Maximum current discharge from 15 to 100 kA� Single pole, single phase+neutral & 3 phase +neutral� Operating voltage 75 to 660 VAC� Common + differential mode protections in a single module

Other Modular DIN-Rail Components (MDRCs)

Item Description Code Features and functions

1 Limitor V surge arrester E441 • Protection against lightening strikes and switching transients onthe power supply system • Modular design • Built-in monitoringdevice • Visual defect indicator • Remote signalling contact

2 Isolator for 63, 80 & 100 A E240 • High fault current withstand up to 25 kA • Fulfils main switch and isolatorsE270 specifications • Provision for interconnection with S2 MCBS and F3 residual

current-operated circuit breakers

3, 4, 5 Switches, push-button, E225, E227 • High contact reliability • Double-break contacts • High faultindicator lights E229 current rating

6 Alarm Indicator • With optical and acoustic signal

7 Emergency lamp for LE • Switches on automatically in the event of power failure and goesdistribution panels off again when the power returns • Operating time: 45 min • Changing time: 12 hours

8 Digital time switch STT • Programmable digital time switch • Day and week programs • Single and dual-channel versions • 8, 12, 24 & 42 command memories • Power reserve for > 250 h

9 Programmable time switch ETS • With and without power reserve • Visual operating indicator• 1-minute setting accuracy • Summer-time/winter-time correction

10 Staircase timer E232 • Closing and subsequent opening of a contact at the end of a predefined time delay

11 Latching relay E250, E260 • For ON/OFF switching of lower power circuits by remote impulse-signals

12 Time delay relay E234 • Multifunctional time relay; selective function & time switches

13 Mini contactor ESB • 2 and 4 pole from 20 to 63 A • minimum switching noise due to newDC armature • Absolutely no hum • Provision for adding 2-pole auxiliary contacts

14 Bell transformer TM, TSM, TS • Low voltage supply of bells, gongs, intercoms and buzzers

15 Hour counter HMT, E233 • For registration of working processes • Counting capacity 1,00,000 hours

16 Analogue ammeter AMT • Direct analogue ammeter from 10mA to 30A

17 Digital voltmeter VMT • Direct digital voltmeter from 0 to 600 V

ABBís S-series of Distribution Boards meet allthe requirements of modern installation fordomestic, commercial or industrial applications.

Blending aesthetics, functionality and safety, theS-series of ABB Distribution Boards aremanufactured with precision and are of highquality CRCA steel sheets. These DistributionBoards undergo a seven-tank phosphatingprocess and powder coating to ensure an anti-rust conditioning, superior finish and lastingstrength. It is available in Ivory (RAL 9010)colour.

Installation

The S-series of ABB Distribution Boards areuniversal mounting types, hence can be flush orwall mounted. These Distribution Boards are

Distribution BoardsA perfect blend of aesthetics, functionality and safety

provided with top and bottom removable glandplates with adequate number of knockouts,which enable easy installation and connection ofconduits of all sizes (upto 36mm dia knockout).Double door construction of Distribution Boardsfacilitates easy removal of door intermediateplate.

Protection

S-series Distribution Boards offer two types ofprotection-IP42 degree with a metal door andIP20 degree without a door. The highest degreeof attention has been paid to the safety aspectof the Distribution Boards, considering that theyare installed in close proximity to people. Anintermediate plate ensures total safety, as nolive parts are exposed when the door is opened.

SHC ñ SPN Consumer Units

Horizontal single phase consumer unit with provisionfor 2 pole (MCB / Isolator / RCD) incoming and singlephase outgoing.

These Distribution Boards come with neutral link,earth link and 100A tinned electrolytic copper busbar.Top and bottom, removable gland plates withknockouts. Mounting of these boards can be flush orsurface.

Number of ways : 4, 6, 8, 10, 12, 14, 16, 20

SHDB ñ TPN DistributionBoards

Horizontal three phase distribution board provision forincomer 8 pole (MCB / Isolator / RCD) and single phaseoutgoings.

These Distribution Boards come with neutral link,earth link, 100A tinned electrolytic copper busbar andwire sets for cable management. Top and bottom,removable gland plates with knockouts. Mounting ofthese boards can be flush or surface.

Number of ways : 4, 6, 8, 12

SEN ñ Metal Enclosures

Metal enclosures, universal mounting suitable for 2pole, 4 pole and 6 pole arrangement.

SHPPI ñ Horizontal per-phaseIsolation Distribution Board

Horizontal per-phase Isolation Distribution Board withprovision for 8 pole (MCB / Isolator / RCD) as incomerand 2 pole (MCB / Isolator / RCD) sub-incomers withsingle phase as part of the outgoings. Separate neutrallinks are provided for per phase isolation.

These Distribution Boards come with earthing link,100A tinned electrolytic copper busbar and top andbottom removable gland plates with knockouts.Mounting of these boards can be flush or surface.


SVTDB ñ Vertical TPNDistribution Board

Vertical three phase Distribution Board with provisionfor 8 pole (MCB / Isolator / RCD) incoming with threephase and single phase (TP/SP) outgoings, completewith insulated busbar arrangement.

Top and bottom, removable gland plates withknockouts. Mounting of these boards can be flush orsurface.


SVTDB T1 ñ Vertical TPNDistribution Board with MCCBincomer

Vertical TPN Distribution Board with provision for 4pole MCCB as incomer and three phase / singlephase (TP/SP) outgoing. For incoming of 160A, ABBT-max MCCB type T1 is used with 200A tinnedelectrolytic copper busbar, neutral bar and earth bars.



S7SEG ñ Seven SegmentDistribution Board

Seven Segment Distribution Board with phasesegregation and separation between incoming andoutgoing with provision for 8P incomer (MCB /Isolator / RCD) and 4 pole sub-incomer (MCB /Isolator / RCD) with single phase outgoing. TheseDistribution Boards come with earthing link, neutralbar and wire sets for cable management for eachcompartment.

Top and bottom, removable gland plates withknockouts. Mounting of these boards can be flushor surface.


SVFL ñ Tier DistributionBoard

Total flexibility as per site needs – configuration as peryour choice of incomer and outgoing. Supply busbarsneed to be selected.


Number of ways : 13 way, 3 tier13 way, 4 tier

SVDB ñ Vertical per-phaseIsolation Distribution Boards

Vertical per-phase Isolation Distribution Board in 4-tierstructure with provision for 8 pole (MCB / Isolator /RCD) incomer and provision for 2 pole (MCB /Isolator / RCD) as sub-incomer with single phaseoutgoing. Separate neutral links are provided for perphase isolation. These Distribution Boards come withearthing link, 100A tinned electrolytic copper busbarand wire sets.


Number of ways : 6, 8, 12

Plug and Socket DistributionBoard ñ SGK

This range offers a wide variety of plug sockets up to63A. These plug sockets can be used for singlephase or three phase along with MCBs or RCBOs.They can be universally mounted.

SPVS

Phase selector Distribution Boards with provision formounting 3 nos. selector switches and 3 nos. pianoswitches as well as provision for 8 pole MCB /Isolator / RCD as incoming and SP MCBs asoutgoing. 100A tinned electrolytic copper busbarsupplied with wire set and neutral bars and top andbottom removable gland plates with knockouts.

Mounting of these boards can be flush or surface.


Unibox IP 40 flush-mounting Acrylic Distribution Board

Europa IP 40 flush-mounting Acrylic Distribution Board

Estetica IP 40 flush-mounting Acrylic Distribution Board

ACP Acrylic Consumer Panel

Technical characteristics

� Protection degree: IP40; Flushmounting

� Door opening with push-pull mechanism

� Extractable DIN rail frame to facilitatebench cabling

� 150mm inter-axis between DIN rails

� One extra module per row thatcan be used by removing the 1/2module trimmings at the end ofeach row

� No. of ways 24, 36, 54



� Colour: White RAL 9001

� Door opening with push-pullmechanism; opens up to 180 degrees

� Door designed to be fitted with a pinlock code 12 867

� Dimensional Stability: -20o C to +85o C

� Extractable DIN rail frame tofacilitate bench cabling

� Optional accessories: Pin typeLock with key (Code No. 12867) &spare doors of each type

� No. of ways 24, 36, 54



� Colors: White RAL 9001

� Dimensional Stability: -20o C to +85o C

� Extractable DIN rail frame tofacilitate bench cabling

� No. of ways 24, 36


� 70% transparent cover made of PC

� Continuous heat resistance and goodperformance in flammability

� Can be locked in the open as well asclosed position

� Slim metal box suitable for singlebrick wall installation (70mm)

� Unmatchable range in SPN typeunits – 6, 8, 11, 14, 18, 21outgoings + 2 pole incomer

� Also available in 3-phaseconstruction with 24, 36, 54module size in 3 rows

� No. of ways 24, 36

� 15o correction is possible if the metal

box is wrongly mounted.

� No. of ways 6, 8, 11, 14, 18, 21

Acrylic Distribution Boards

Dimension Details

E 240-E 270

DS 674 DS 674, 25A DS 674, 32 / 40A DS 674, 50 / 63A

DS 971 C16

F 362 / F 364

2 modules 4 modules

S 270

Tripping characteristics and rated currents

B-, C- and D-Characteristic

The new characteristics acc. EN 60 898 are for line protection . They all have the samethermal settings and differ only in their magnetic tripping values.The higher magnetic settings of the C- or D-characteristics are for applications with start orhigh inrush-currents.

K-Characteristic

For cable and appliance protection.

Rated currents 0.5 to 63 A in 17 steps (S 270) or 0.2 to 63 A in 20 steps (S 280). Motorprotection can be achieved by the selection of the M.C.B. with the correct rated currentcorresponding to the motor data. The electro-magnetic trip is set in such a way that themotor starting current does not lead to tripping.

Due to the higher magnetic non tripping current, in circuits with incandescent lamp groups,mains parallel operated fluorescent lamps or other discharge lamps, the conductor cross-section to be protected can be more economically utilized as compared to a M.C.B. of thesame rated current in tripping characteristic B.

Z-Characteristic

For protection of semiconductor devices and voltage transformer circuits.

MCB Tripping characteristics

LPD

/ATL

V/01

/200

6/10

000

ABB LimitedLow Voltage ProductsNo. A1, A2 & A4, 3rd StagePeenya Industrial AreaBangalore - 560 058Tel: +91-80-22949702 – 04Fax: +91-80-28360349

www.abb.co.in

NBCC Tower4th FloorNo. 15, Bhikaji Cama PlaceNew Delhi 110 066Tel: +91 11 26186000Fax: +91 11 26197592/84035

ChandigarhTel: +91 172 2606375Fax:+91 172 2601618

JaipurTel: +91 141 2744024Fax:+91 141 2744027

LucknowTel: +91 522 2209436Fax:+91 522 2209478

LudhianaTel: +91 161 5082395Fax:+91 161 5082396

No. 9, 4th FloorLala Lajpat Rai Sarani(Elgin Road)Kolkata 700 020Tel: +91 33 22832911/06Fax: +91 33 22832990

BhubaneshwarTel: +91 674 2594510Fax: +91 674 2594529

JamshedpurTel: +91 657 2224016Fax:+91 657 2223009

ABB HouseDr. S B PathBallard EstateMumbai 400 038Tel: +91 22 56318231 – 39Fax: +91 22 56318276/77

IndoreTel: +91 731 2534176

PuneTel: +91 20 25881503-06Fax:+91 20 4016255

VadodaraTel: +91 265 2642141-42Fax:+91 265 2640716

Embassy Star, 1st FloorNo. 8, Palace RoadVasanth NagarBangalore 560 052Tel: +91 80 22949779Fax: +91 80 22949808

Century PlazaNo. 3C, 3D, 3F, 3rd Floor561 / 562, Anna SalaiTeynampetChennai 600 018Tel: +91 44 24340201–203Fax: +91 44 24340282

CoimbatoreTel: +91 422 2313415Fax:+91 422 2313415

HyderabadTel: +91 40 27675988Fax:+91 40 27607580

KochiTel: +91 484 3942600Resident Manager:Tel: +91 94471 37264

Vandana House1st FloorG E Road, RamkundRaipur 492 001Tel: +91 771 4060816 – 8Fax: +91 771 5053391

North East West SouthCentral

Regional Marketing Offices:

Luckyindia-Frontpage-ABB-Catalogue.pdfLPD Brochure.pdf

Documents

CATALOGUE ABB PRODUCTS3.imimg.com/data3/FB/DM/MY-5827975/lightning-protection...CATALOGUE ABB PRODUCTS Shri Sharafat Ali, Lucky India Power Solutions 572, Gulshan Colony, Behind OBC