Catalogue of products fuel additives - XADO Information Portalxado.info/download/Xado_Katalog_Jet_2011.pdf · This catalogue contains a full list of products (including description,

© XADO Chemical Group

Catalogue of productsJETTHRUSTJET 100

fuel additives

engine cleaners

metal conditioners

metal conditionerswith revitalizant

oil additives

oils for motorequipment

productsfor cooling systems

This catalogue contains a full list of products (including description, application, and advantages), as well as the information about typical situations during vehicle’s operation and their solutions with the help of JET 100 products.

Among the specialists, the term “JET” means “jet thrust”. What the manufacturer of JET 100 additives guarantees is: power, speed, acceleration and, of course, reliability. Today there are more than 40 products in this series. There are fuel additives, fuel system cleaners and engine treatment products which prolong recourse and improve reliability of the engine operation.

VERYLUBE JET 100 series

JETTHRUST

Apply with

every fueling

| 3

Additional benefits:

+ replaces expensive cleaning procedure of jets (injectors) on the stand

+ allows to control tank cleanness according to fuel filter condition (throughput capacity)

Fuel additivesThe main group of products is fuel system cleaners. Highly effective ingredients of BASF Chemical Company are used for their production. The cleaners are designed to prevent contamination and to flush engine feed circuit, and also to improve fuel quality. These additives are introduced into the fuel tank before fueling.• The products are produced in special cans with a narrow neck, convenient for filling in a fuel tank. • Usually single can is enough to treat one fuel tank (40-60 l).

JET 100Fuel system cleaner

JET 100Euro complex fuel system cleaner

This product is designed to clean a fuel system. Recommended for application every 5000 km run as a preventive measure.

250 ml plastic bottle

250 ml can

Art. XB 40072petrol

Art. XB 40174diesel

500 ml can

Art. XB 40274per 500 L of fueldiesel

Advantages:

• cleans jets (injectors), inlet valves, combustion chamber

• increases engine power

• reduces fuel consumption

• reduces detonation risk

• eliminates problems of cold start

Advantages:

• effectively cleans all fuel system components even in case of severe contaminations



• cleans fuel system from moisture

• eliminates problems of cold start


+ contains highly effective detergent additives, as well as brand fuel (EURO+ standard)

The Cleaner is recommended to use with every fueling to improve the quality of regular fuel. Complex cleaning of a fuel system. If used regularly, JET 100 Cleaner guarantees to keep main parameters of an engine at "as new" level and to provide its faultless operation.

1 bottle per 40–60 L of fuel


250 ml can

Art. XB 40073petrol

Art. XB 40175diesel

500 ml can



Fuel additives

Advantages:

• improves fuel quality up to Euro 5 standard

• cleans efficiently all fuel system components

• boosts engine power

• increases energy conversion of fuel and contributes to its economy

• cleans a fuel system from moisture, improves low-temperature properties of diesel fuel

• increases octane/cetane rating


+ “5 in 1” formula. Combines and exceeds in efficiency the following parameters: Euro 5, Energy, Octane/Cetane Booster, “Protection of catalyst converter/particulate filter”, Cleaner

+ protects fuel system against frost penetration (Antigel/Aquastop)

+ saves fuel considerably due to its improved quality

The most effective product in JET 100 series.

JET 100 Ultra is the innovative solution for absolute protection of a fuel system. It is recommended to keep JET 100 Ultra always in your car and apply it in the event of accidental low-quality fueling.

It contains a complex of effective fuel additives to reliably and safely reduce negative effects caused by low- quality fuel.

JET 100 Ultra

Supercomplex of fuel additives “On the rOad” 5 in 1

250 ml can

Art. XB 30002petrol

250 мл can

Art. XB 30003 diesel

4 |

BestsellerBestsellerBestseller

| 5

250 ml can

250 ml can

Art. XB 40179petrol

Art. XB 40178diesel

JET 100 Energy Engine power amplifierIncreases energy-conversion efficiency of fuel. JET 100 Energy improves engine power and thermodynamic properties of combustion materials, as well as increases a potential reserve of fuel thermal energy and improves fuel inflammability.

JET 100 Economy Additive which contributes to fuel economyFuel economy is achieved due to the complex detergent additives and special lubricity agents.

for 1000 L of diesel fuelfor 600 L of petrol

Advantages:


• increases energy-conversion efficiency

• makes engine start easier

• reduces detonation knocks

• makes cold start easier


+ possesses soft detergent properties, cleans fuel system

+ reduces the exhaust of harmful substances into the atmosphere

+ can be used for 2-stroke and 4-stroke engines

Advantages:

• reduces momentary friction losses in a cylinder-piston group during engine operation

• ensures long-term effect of fuel economy owing to accumulation of the friction modifiers

• economical in application – 250 ml of additive for 600/1000 l of fuel

• possible fuel economy up to 5%


+ fuel system cleaning is not necessary, if the product is used regularly


250 ml can

Art. XB 40757petrol

Art. XB 40158diesel

500 ml can






250 ml can

Art. XB 40082petrol

Art. XB 40182diesel

250 ml can

250 ml can

Art. XB 40086petrol

Art. XB 40085diesel

500 ml can



JET 100 Euro 4 Additive designed to improve fuel qualityProtects engine’s fuel system against negative effect caused by low-quality fuel. Ensures reliable engine operation similar to high-quality fuel use. It is reco m-mended to apply JET 100 Euro 4 with every fueling for better results.

JET 100 Fuel stabilizerJET 100 Fuel Stabilizer makes engine start easier, even after a long-term storage. It preserves reliably fuel system during time breaks in engine’s operation, protecting a fuel pump against corrosion and wear. JET 100 Fuel Stabilizer creates a stable poly-molecular protective film on the parts of fuel equipment, defending them against corrosion even if the moisture gets into the system.

Fuel additives

Advantages:

• improves fuel quality to Euro-4 standard

• makes cold start of the engine easier

• improves engine operation at idling

• increases fuel energy-conversion

• cleans the whole fuel system

• prevents formation of corrosion and deposits

• protects fuel equipment against wear


+ decreases exhaust toxicity

+ increases octane/cetane rating

+ prolongs service life of a catalyst converter/particulate filter

Advantages:

• ensures easy start of an engine

• reliably preserves fuel system during time breaks in engine operation

• keeps initial fuel quality


+ removes condensed water and ice crystals from fuel

+ increases octane/cetane rating

+ contributes to fuel economy

6 |

| 7

250 ml can

250 ml can

Art. XB 40035petrol

Art. XB 40036diesel

250 ml can

250 ml can

Art. XB 40187petrol

Art. XB 40188diesel


JET 100 Fuel Pump Protect Protection of engine fuel equipmentJET 100 Fuel Pump Protect improves reliability of fuel equipment operation and prolongs its life span. Atomic revitalizant, contained in this product, prevents wear of fuel pump parts and extends their resource. Fights successfully against failures in fuel equipment operation caused by wear, corrosion, dirt, and after usage of low- quality fuel.

JET 100 Exhaust System Protection Catalyst Converter/Particulate Filter ProtectionJET 100 Exhaust System Protection prevents choking of catalyst converter/particulate filter caused by deposits formed after usage of low-quality fuel. It ensures more complete combustion of fuel, increases its octane/cetane rating and engine power.

Advantages:

• allows avoiding expensive repair as a result of broken down catalyst converter/particulate filter

• complex cleaning of a fuel system and combustion chamber from all types of contaminations and deposits

• contains only organic compounds (non-metal-containing), guarantees protection of fuel system parts against burnout.


+ helps to clean a catalyst converter/particulate filter from old deposits.

For petrol engine

Advantages:

• prevents wear of electric fuel pump parts (gear and roller types)

• reduces “hang-up” risk of injector needle valve

For diesel engine

Advantages:

• protects a high pressure fuel pump from wear

• effective when using diesel fuel with low sulfur content


+ reduces denotation risk

+ cleans fuel system

+ improves fuel quality


Оctаne booster

Advantages:

• increases octane rating by 5-6 units*

• eliminates negative effect of low quality fuel application

• eliminates detonation and risk of surface ignition

• eliminates cold start problems


Advantages:

• improves fuel system operation in case moisture gets into the system

• protects parts of the fuel system against corrosion

• prevents icing of the fuel system

Cetane booster

Advantages:

• increases cetane rating by 7 units, improves efficiency of fuel combustion and reduces its consumption

• decreases metal knocks caused by burning of low-quality diesel fuel

• stabilizes engine operation at idling and during operation

• makes engine start easy

Apply with

every fueling

antigel

*in case the fuel does not contain other additives for octane rating increase

8 | Fuel additives


250 ml can

Art. XB 40080petrol

Art. XB 40081diesel

500 ml can



250 ml can

250 ml can

Art. XB 40176petrol

Art. XB 40177diesel

500 ml can



JET 100 Antigel/Aquastop Fuel improver

The product decreases pour point of summer fuel from -10°C to -22°C, winter fuel from -35°C to -47°C.

JET 100 Aquastop absorbs water condensate, defrosts ice crystals, and removes moisture with exhaust gases.

JET 100 Оctаne booster/Cetane boosterAdditives designed to increase octane and cetane rating of fuelJET 100 Octane booster / Cetane booster improves fuel combustion efficiency, increases engine power and its acceleration. For better results it is recommended to apply the product with every fueling.

Aquastop

Advantages:

• prevents coalescence of paraffin crystals, safely disperses them throughout all fuel volume

• improves fuel pumpability, prevents filter clogging

• guarantees easy engine start at low temperatures

+ application of this product in summer time ensures fuel economy up to 2%

8 |

The product is for 4 cylinders. The product is introduced into cylinder (through the plug hole). The time to remove carbon contamination is about 8 hours. After this procedure motor oil change is needed.

for 4-5 L of motor oil

QUICK RESULT


| 9

JET 100 Decarbonizer for engine

JET 100 Adaptive Flush Fast/Soft

Fast – acting JET 100 Decarbonizer is designed to remove carbon contaminations and restore stuck piston rings of gasoline and diesel engines. The product is recommended for application in the events of engine overheating, in-creased oil consumption, smoking.

Thoroughly and carefully, these products clean engine oil system from any kind of contamination and prepare the oil system for new oil. They are recommended for application before oil change: when changing to another type of oil (e.g. from mineral to semi-synthetic oil), oil viscosity, other brand name. For better results, products should be used every time you change oil. The products are applied for gasoline and diesel engines of all types. Safe for turbochargers.

Products which help to keep engine absolutely clean. They clean oil system, cylinders and pistons, combustion chambers and valves from all kinds of contaminations (scale, carbon, lacquer, tar), while restoring lost compression in cylinders.

Engine cleaners

Adaptive Flush Fast

Adaptive Flush Soft

Adaptive Flush is added into used motor oil before oil change. Flushing is carried out at idling during 15-20 min.

It is introduced into used motor oil before oil change. Flushing is carried out at idling for 15-20 min or 20-30 km drive.

If thorough flushing is needed, the run with oil and flush can be increased up to 150-200 km. The product restores mobility of oil- and compressor rings.

It is used in a number of procedures for oil system flushing to a technical purity level (run using oil with flushing fluid up to 1000 km).


Art. XB 40097


Art. XB 40089

Advantages:

• restores rings mobility

• decreases oil consumption

• cleans cylinders and pistons, combustion chambers, and valves from all types of contaminations (scale, carbon, lacquer, tar)

• restores lost compression in cylinders

• reduces harmful exhausts250 ml plastic bottle

Art. XB 40351

Metal Conditioners10 |

Metal Conditioners are fully synthetic products developed to maximize the service life of mechanisms. These products retain their active properties to continuously serve throughout the entire life circle of the oil.

for 4-5 L of motor oilIt is recommended to use the product with each oil change

for 1-2 L of transmission oil

for 8 L of operating fluid




Metal conditioner for engine

Metal conditioner for mechanical transmissions

Metal conditioner for automatic transmission and power steering

JET 100 Metal Conditioners

Advantages:

• increases reliable performance of gear drive under extreme loads

• contributes to fuel economy

• prolongs service life of transmission units

• reduces noise and vibrations

• makes gear shifting easier

Advantages:

• makes gear shifting smoother and shockless

• improves operational accuracy of steering gear, reduces steering wheel force

• protects against wear and overloads

• improves dynamic characteristics of a vehicle

• reduces noise and vibration


Advantages:

• protects an engine against overloads


• prolongs service life of an engine

• improves dynamic and acceleration characteristics of a vehicle


+ can be used as a refill during usual oil consumption

The main purpose of metal conditioners is to enhance lubricating properties of oils. The oil film with metal conditioner is more durable and creates special conditions on the metal parts' surfaces to protect them against wear.


Art. XB 40361


Art. XB 40364


Art. XB 40362

| 11

Undeniable advantage of metal conditioners with revitalizant is their after-effect due to metal ceramic coating formed by revitalizant which protect engine parts even after oil change.

Metal conditioner with revitalizant for

mechanical transmission



JET 100 Metal conditioners with revitalizant

Advantages:

• protects against overloads and extreme operating conditions

• compensates current wear of the parts

• prolongs service life of units by 5 times

• increases dynamic and acceleration characteristics of a vehicle, its power and acceleration characteristics


Advantages:

• protects against overloads

• prolongs service life of units by 5 times

• compensates current wear of the parts

• improves dynamic characteristics of a vehicle


Advantages:

• provides shockless gear shifting

• protects against wear and overloads

• reduces noise and vibrations


• compatible with all types of automatic transmission oils and hydraulic fluids


+ can be used as a refill during usual oil consumption



for 8 L of operating fluid

for 1-2 L of oil

Metal conditioner with revitalizant for engine

Metal conditioner with revitalizant for automatic transmission and power steering


Art. XB 40090


Art. XB 40099


Art. XB 40098

Oil additives12 |

These additives are used to increase reliability and efficiency of engine operation and other car units. The products increase oil resource, improve its viscosity properties, eliminate leaks.

JET 100 Antismoke additive with revitalizant

This additive seals clearances in cylinder-piston group due to increase of oil viscosity. It eliminates problems connected with wear of the parts — the revitalizant, contained in this additive, prevents further wearing of the engine and allows safe engine operation for a long period of time till the planned overhaul.

Advantages:

• reduces oil consumption and engine smoking

• increases oil viscosity

• increases pressure in the lubricating system

• prevents further wearing of the engine

• efficient for engines with average and big mileage

JET 100 Oil Treatment

JET 100 Oil Treatment for engine is a complex synthetic product. The product prolongs service life of oil for additional 5 000 km drive. Ensures reliable engine operation when scheduled oil replacement is delayed. Single application is recommended (before oil change).

Advantages:

• increases operational characteristics of oil

• keeps engine clean

• prevents oil thickening caused by overheating

• improves reliability of oil operation

• multigrade application for all types of internal combustion engines

• safe for turbocharger units



LONG LASTINGEFFECT


Art. XB 40091


Art. XB 40092

The product contains special components which restore elasticity of sealing materials. As a result, tight contact between sealant and metal is restored and the oil leak is stopped. Sealer has universal application in all mechanical (manual) transmission units (car gearboxes, transfer gearboxes, bridges) and power steering.

JET 100 Sealer for transmission and power steering

| 13


Art. XB 40095

JET 100 Oil Pressure Restorer with revitalizant

This product increases oil viscosity, seals clearances in bearings and eliminates problems connected with their wear. The revitalizant, contained in this product, prevents further wearing of the engine and allows safe engine operation till the planned overhaul.

JET 100 Stop Leak for engineThis product contains special components which restore elasticity of sealants. As a result, tight contact between sealant and metal is restored and the oil leak is stopped.

Advantages:

• increases pressure in the lubricating system

• increases oil viscosity

• prevents further wearing of the engine

• efficient for engines with big mileage

Advantages:

• stops oil leaks and prevents them in future

• restores rubber and gaskets' elasticity

• improves contact “sealant - metal”


+ no need in expensive repair

+ compatible with all types of motor oil

Advantages:

• restores rubber and gaskets' elasticity

• prevents further leaks

• improves contact “sealant - metal”


+ no need in expensive repair, acts promptly and effectively

+ compatible with all types of mechanical (manual) trans mis-sion oils and hydraulic fluids

for 4-5 l of motor oil

for 4-5 L of oil

for 1-2 L of oil (operating fluid)


Art. XB 40049


Art. XB 40096

Oils for motor equipment


Art. XB 20055

14 |

The oils of JET 100 series are applied to water and land motor equipment. They provide reliable lubrication and protection. The oils contain metal conditioner. Due to special components, the oils allow operation of motor equipment under extreme overloads. Easy-to-use packaging for instant application.

JET 100 2Т Scooter Оil Synthetic low smoke oil for 2-stroke engines of motor equipmentField of application: scooters, chain saws, lawn mowers, gasoline electricity generators and other motorized equipment. Meets requirements: API TC, ISO-L-EGC, JASO FC (Low Smoke). Contains metal conditioner. Colored green.

JET 100 ТС Outboard Oil Biodegradable ashless oil for 2-stroke engines of water equipmentFiled of application: motor boats, hydro cycles, motor equipment with water cooling. Meets requirements: NMMA TC W-3, API TD. Contains metal conditioner. Colored blue.

Mix with fuel at a ratio of 1:50

Mix with fuel at a ratio of 1:100

Advantages:

Advantages:

• reliably lubricates and protects the engine

• thanks to low-smoke formula, keeps engine clean

• prevents deposit formation in combustion chamber and exhaust windows

• easily mixed with fuel

• owing to metal conditioner, protects engine under overloads


• reliably lubricates and protects the engine

• thanks to ashless formula, the oil burns to the end and does not form deposits on the spark plugs

• easily mixed with fuel

• due to metal conditioner, it protects the engine under overloads

• environmentally friendly


CONTAINSMETAL

CONDITIONER

CONTAINSMETAL

CONDITIONER


Art. XB 20056

| 15


Art. XB 20058

Products for cooling systems

JET 100 Chain Oil Biodegradable oil for saw chains

JET 100Stop Leak for Radiator

JET 100Radiator Flush

Contains revitalizant. Specially designed to lubricate modern high-load professional chainsaws. Colored red, so the applied grease could be clearly seen on the chain. Designed to lubricate chainsaws, such as: Husqvarna, Oleo-Mac, Stihl, Partner, Efgo, etc.

This high-performance product is designed to prevent le aks in a cooling system. Completely eliminates leaks, per manently and reliably seals hair cracks and minor da-mages up to 0.9 mm in pipelines and joints. Eliminates loose fit of the pump gasket, leakage of cylinder block gaskets, etc.

Quickly (in 10 min) dissolves sediments, dirt and rust accumulated in radiator and cooling system. It is recommended to apply the product during each coolant fluid change.

Advantages:

• reliably lubricates and protects chainsaw parts from wear

• thanks to the revitalizant, it prolongs resource of the saw chain and guide blade, chain-wheel

• possesses high stickiness properties

• prevents chain slipping

• biodegradable, environmentally friendly

Advantages:

• universal application for cooling systems of gasoline and diesel engines

• compatible with all types of fluids applied to cooling systems

• safe for parts’ materials of a cooling system

• lubricates a pump gasket

• protects cooling system against rust and corrosion

• does not contain acids; nontoxic

for 10-12 L of coolant

Advantages:

• quickly cleans cooling system

• removes scale, rust and dirt

• creates protective anticorrosive film on cooling system parts

• neutralizes formed acids, protects the system against corrosion

• improves efficiency of engine cooling


Art. XB 40093


Art. XB 40094

Recommendations on applicationSituation

Oil systemApplicationPage No. JET 100 productSolution

Overheating of engine (stuck piston rings and grey smoke out of exhaust system, high oil consumption)

Decarbonization of piston rings 9 Decarbonizer Decarbonization, oil change

Intensive vehicle operation, operation under extreme conditions, under overloads

Creation of multi-level protection system for engine’s parts, trans-mission, power steering pumps, automatic transmission

11 Metal Conditioners with revitalizant During each oil change

Grey smoke out of exhaust system, high oil consumption, considerable engine wear

Oil consumption decrease, clearances sealing in cylinder-piston group

12 Antismoke additive with revitalizant Once, when necessary (until elimination of the cause)

Dirt under valve cover. Irregular flushing of oil system. Operation after vehicle has been parked for a long time

Thorough flushing of oil system 9 Adaptive Flush Soft 200-300 km run, oil change

Delay of planned oil change Increase of oil resource up to 5000 km

12 Oil Treatment Once, before oil change

Regular oil change, change of oil brand (oil viscosity, oil type)

Oil system flushing 9 Adaptive Flush Fast

Adaptive Flush Soft

15-20 min at idling, oil change

15-20 min at idling or 20-30 km run, oil change

or

Oil system has never been flushed (unknown history of vehicle technical operation)

Flushing up to the level of technical cleanness with additional oil change

9 Adaptive Flush Fast/Soft Up to 40 min at idling

Adaptive Flush Soft

Decarbonization, oil change

Up to 1000 km run, oil change

Decarbonizer

Low oil pressure in the oil system (indicator light is on), considerable engine wear

Oil pressure increase in the oil system (due to oil viscosity increase)

13 Oil Pressure Restorer with revitalizant Once, when necessary (until elimination of the cause)

Oil leakage in the engine (transmission unit, hydraulic system)

Restoration of gasket elasticity, leakage elimination

13 Stop Leak Engine Once

Fuel SystemRegular operation of fuel system Keeping of fuel system clean 3 Fuel system cleaner

Euro complex fuel system cleaner

Once per 5000 km

During each fueling

or

Unstable engine operation, “3-stroke” operation. Difficult engine start. Dirty injectors according to the specialists’ experience.

Thorough flushing of fuel system.

3 Once, when necessary

Fuel system cleaner

Fueling with low-quality fuel Increase of fuel quality. Fuel system cleaning. Increase of engine power. Increase of octane/cetane rating. Pro tec tion of exhaust system.

4 Supercomplex of fuel additives “On ThE ROAD”

5 Energy Engine power amplifier

8 Octane booster / Cetane booster

During fueling

6 Euro 4 Additive designed to improve fuel quality

During fueling, choose the necessary combination of products (one or more) from the list

or

Fuel system cleaner3

Exhaust system protection Catalyst Converter/Particulate Filter Protection

7

Engine power reduction Increase of fuel energy-conversion efficiency

During each fueling5 Energy Engine power amplifier

Difficult start of cold engine (including starts after long parking or storage)

Improvement of fuel inflammability, protection of fuel equipment during storage

During fuelingFuel Stabilizer6

Increased fuel consumption Fuel system cleaning, reduction of friction losses in cylinder-piston group.

During each fueling5 Economy Additives for fuel economy

Unstable operation of fuel equipment, fueling with low-quality fuel

Protection of fuel equipment, improvement of fuel quality

During fueling7 Fuel Pump Protect

Leakage in cooling system of engine Elimination of leakage without system disassembling

When necessary15 Stop Leak Radiator

Unstable operation of fuel equipment in cold seasons, difficult start of cold engine, including long parking stay, fueling with low-quality fuel

Removal of moisture from fuel system

During fueling8 Aquastop

Usage of fuel with low octane/cetane rating Increase of octane/cetane rating

During fueling8 Оctаne booster/Cetane booster Additive designed to increase octane/cetane rating

Possibility of exhaust devices choking, fueling with low-quality fuel

More efficient fuel burning During fuelingProtection of exhaust system Catalyst Converter/Particulate Filter Protection

7

Unstable operation of fuel equipment of diesel engine in cold seasons, difficult start of cold engine, including long parking stay, fueling with low-quality diesel fuel

Prevention of waxing of summer diesel fuel at low temperatures

8 Antigel During fueling

Reduced efficiency of engine cooling system. Choking of cooling system of engine

Cleaning of cooling system without its disassembly

During each change of cooling fluid

15 Radiator Flush

Cooling system

Situation ApplicationPage No. JET 100 productSolution

Dashboard Polish

• Easily penetrates into smallest scratches on parts' surfaces and removes dirt

• Renews appearance of plastic and wood. Compartment gains soft glitter

• Surface gains antistatic properties, becomes less dirty and less dusty

• Does not leave greasy film after application

• Keeps plastic from cracking

New universal products for cleaning and refreshing of pas-senger compartment, applicable to plastic parts of dash -board and cabin. The Polishes clean parts made of wood, leather and vinyl, while bringing pleasant scent and aro-ma inside the car. Easy-to-use package, modern design.

Contains innovative product — odor absorber.

Molecules of usual air fresheners are just mixed with molecules of unpleasant smell. Special active substances contained in the formulation of Absorber, remove unpleasant smell and leave a feeling of purity and freshness after application.

Absorbers act according to the principle of chemisorption (chemical absorption of odorous molecules with almost non- volatile substance). As a result, the inner surfaces treated with a Polish perform a function of absorption surfaces.

200 ml Aerosol can

With odor absorber

Art. XB 40040

Aroma of a new car loved by automobilists, mixture

of luxurious leather and exquisite wood.

New car

Art. XB 40039

Sparkling and pure scent of lime associates with cleanness and ensures momentary freshness

LimeArt. XB 40041

Bright, acerbic and saturated aroma of expensive tobacco with delicate notes, sweetened with vanilla.

Tobacco

Art. XB 40042

Has a characteristic aroma of vanilla, which

gained popularity among air fresheners long time ago.

Vanilla

Head office: 4, 23 Augusta Lane, Kharkov, 61103, Ukraine.Tel.: +38 (057) 717-55-55, 717-44-44, fax +38 (057) 714-11-11. www.xado.com, Info@xado.сom

The manufacturer has the right to change the design of the products' packaging. All rights to the presented trade marks and logos belong to their legal owners. Style, design and contents are the object of copyright of XADO Ltd. and pro tected by law. Reprinting and other application of materials without written authorization of XADO Ltd. is prohibited and involves responsibility according to the existing legislation. © XADO. All rights reserved.

Documents

Catalogue of products fuel additives - XADO Information Portalxado.info/download/Xado_Katalog_Jet_2011.pdf · This catalogue contains a full list of products (including description,