2

Click here to load reader

CBX 500® and CBX 3500™ Multiservice Switches 60-port channelized t1_e1 circuit emulation module datasheet

Embed Size (px)

DESCRIPTION

CBX 500® and CBX 3500™ Multiservice Switches 60-port channelized t1_e1 circuit emulation module datasheet

Citation preview

Page 1: CBX 500® and CBX 3500™ Multiservice Switches 60-port channelized t1_e1 circuit emulation module datasheet

60-Port Channelized T1/E1 Circuit Emulation Modulefor the CBX 500® and CBX 3500™

Multiservice Switches

The 60-port channelized T1/E1 Circuit Emulation (CE) module for the CBX 500® and

CBX 3500™ switches enable you to reduce costs by carrying private line/TDM services

over your existing ATM-based multiservice network. With this module, the switches convert

traffic from TDM circuits into ATM cells, route those cells across a bandwidth-efficient

ATM network, and reassemble them into TDM at the other end. With the industry’s highest

T1/E1 port density, this module allows you to support more customers.

Applications• Provide CE Services

(Private/Leased Line)

• Replace digital cross-connectsystem (DCS)

• Transport for time-delay-sensitivetraffic, such as video and voice

• Transport for legacy TDM traffic

• Consolidate multiple access lines

Benefits• Generate immediate incremental

revenue by using existing switchslots

• Save costs by transportingtelephony and data services over your existing ATM-basedmultiservice network

• Free capacity to support morecustomers on the same system

• Realize operating efficiencies with Navis® network managementsystem by quickly turning up new circuits

• Enable customization of bandwidthat customer convenience withchannelization

Features• Provides structured and unstructured services

• Supports Permanent Virtual Circuits (PVCs) and Soft Permanent VCs (SPVCs)

• Supports both T1 and E1 on the same interface via easily configuredsoftware options

• Industry-leading T1/E1 port density supports 60 T1(60x24 DS0) or 60E1(60x30 DS0) ports per slot

• End-to-end point and click provisioning

• Proven carrier-class reliability of the CBX 500® and CBX 3500™ switches

• Channel Associated Signaling (CAS) and Common Channel Signaling(CCS) pass through signaling

• Hot swappable

Technical Specifications Description Specifications

1.Protocols and Standards SupportedATM/FR protocols: AAL0, AAL1 (AAL5 for control traffic)Circuit Emulation protocols: AAL1; af-vtoa-0078.000, ITU-T I.363.1,

CES-IS 2.0 MIB

2.Standard ServicesPVCs – CES-IS 2.0, Soft Permanent Virtual Circuits (SPVCs)(Structured and unstructured services)

Page 2: CBX 500® and CBX 3500™ Multiservice Switches 60-port channelized t1_e1 circuit emulation module datasheet

Specifications are subject to change without notice. Contact your Lucentrepresentative for information onavailability and upgrades. Lucent reserves the right to change, modify,transfer or otherwise revise thispublication without notice.

To learn more about our comprehensiveportfolio, please contact your LucentTechnologies Sales Representative,Lucent BusinessPartner or, visit our web site at www.lucent.com orwww.lucent.com/solutions/core_switching.html.

CBX 3500 is a trademark of Lucent Technologies Inc.

Navis and CBX 500 are registeredtrademarks of Lucent Technologies Inc.

NEBS is a trademark of Telcordia Laboratories.

Copyright © 2004 Lucent Technologies Inc.All rights reserved

MSS v4.0504

3.Physical Layer12 different Line Build Out (LBO) for both T1/E1Standard Line Coding options: AMI (Both) / HDB3 (E1) / B8ZS (T1)Standard FRAMING formats: SF/ESF/Unframed for T1,

CRC4/CAS/Unframed for E1Standard ALARM handling: – LOS / AIS / OOF / RED / LOMF / YEL / IDLE

– Performance Monitoring for bothT1/E1 as per ANSI spec, both inStructured and Unstructured modes

– BERT for both T1/E1– Line/Diagnostic/Inband LOOPBACKs

for both T1/E1

4.Trunk Conditioning OptionsData only, Signaling only, Data andSignaling and None. Fully configurable inboth Transmit/Receive Direction.

5.Network ManagementManaged by Navis® Integrated NetworkManagement Systems

6.Physical DimensionsSize: 1 in. x 16 in. x 11 in

(2.54 cm x 40.6 cm x 27.9 cm)

7.Power Wattage: less than 50 watts per slot

8.EnvironmentalOperating Temperature: 0-50° C (32-122° F)Relative Humidity: 0-90%

9.RegulatorySafety: – UL 60950

– CAN/CSA-C22.2 No. 60950– EN 60950, IEC 60950, EN 60825-1– FDA CDRH Title 21 CFR Sub-chapter J

Electromagnetic: – FCC 47 CFR Part 15 Class A– AS/NZS 3548/CISPR 22 – EN 55022 Class A– VCCI Class A ITE

Immunity: – N55024 ITE Immunity– EN61000-4-2 ESD– EN61000-4-3 Radiated Immunity– EN61000-4-4 EFT– EN61000-4-5 Surge– EN61000-4-6 Low Frequency – Common Immunity– EN61000-4-8 Magnetic Field

Other: – NEBS™ GR-63-CORE– Telcordia GR-1089-CORE– ETSI EN 300 386

Technical Specifications (continued)Description Specifications

60-Port Channelized T1/E1 Circuit Emulation Modulefor the CBX 500® and CBX 3500™

Multiservice Switches