CC Marine 2013-14 Catalogue_Pumps

PUMPS&PLUMBING

672

THRU-HULL FITTINGS

ORDER NO. Mfr. No. Description / Hose ID

106-66540 66540-3 Connectors Short - 5/8"

106-66541 66541-3 Connectors Short - 3/4"

106-66543 66543-3 Connectors Short - 1-1/8"

106-66545 66545-3 Connectors Short - 1-1/2"

106-66546 66546-3 Connectors - 5/8"

106-66547 66547-3 Connectors - 3/4"

106-66549 66549-3 Connectors - 1-1/8"

106-66551 66551-3 Connectors - 1-1/2"

STAINLESS STEEL STRAIGHTTHRU-HULL CONNECTORS - BARBED• Two lengths are available. The Standard model has full length thread for thick hulls for easy tightening.The Short thread is a more compact size. Allows installation near corners and in confined areas.• Stainless steel thru-hull connectors are designed for installation above the waterline only

WHITE THRU-HULL FITTINGS - POLYPRO• High quality UV and chemical resistant virgin polypro

90 Degree Fittings - Inches

ORDER NO. Mfr. No. Description A B C D(Hose) E205-00652 TH-652-DP Straight 1-5/8” 3-3/8” 1-3/4” 5/8” 1”205-00752 TH-752-DP Straight 1-1/2” 3-1/16” 1-3/4” 3/4” 1”205-01202 TH-1202-DP Straight 1-7/8” 3-1/2” 1-3/4” 1-1/8” 1-3/8”205-01502 TH-1502-DP Straight 2-7/8” 3-1/2” 1-3/4” 1-1/2” 2”

STAINLESS STEELSCUPPER VALVE - BARBEDGood Looks and Stainless Durability!• The Scupper Flap is tough neoprene rubber with a moldedV-groove to reduce backwash.• Fasteners are concealed and corrosion-proof.• Stainless steel scupper valves are designed for installationabove the waterline only

ORDER NO. Mfr. No. Description106-66553 66553-3 Scupper - 1-1/2" Hose ID

BRITE PLATE™ CHROME PLATEDPOLYPRO THRU-HULL FITTINGS• Look of stainless - price of plastic• Strong plating process strengthens parts & resists chemicals• Five step metal bonding process• Won’t flake, chip or easily scratch• For above waterline useORDER NO. Mfr. No . Description A B C D(Hose) E205-00750 TH-750CP-DP Straight 1-1/2” 3-1/16” 1-3/4” 3/4” 1”205-01200 TH-1200CP-DP Straight 1-7/8” 3-1/2” 1-3/4” 1-1/8” 1-3/8”205-01500 TH-1500CP-DP Straight 2-7/8” 3-1/4” 1-3/2” 1-1/2” 2”205-07590 TH-7590CP-DP 90˚ 1-1/2” 2-1/2” 1” 3/4” 1”205-01290 TH-1290CP-DP 90˚ 1-7/8” 3-1/2” 1-1/8” 1-1/8” 1-3/8”205-01590 TH-1590CP-DP 90˚ 2-7/8” 4-1/4” 1-5/8” 1-1/2” 2”

Straight Fittings - Inches

For more information see: www.attwoodmarine.com

For more information see: www.thmarine.com

A Lifetime of Stainless Performance!Polish your image with these beautiful, durable stainless steel fittings. Each Thru-Hull and ScupperValve is available with a new silicone gasket and are backed by Attwood’s trusted Lifetime Warranty!Why specify plastic parts when these fittings will last the life of the boat?• Rugged stainless construction - #316 stainless steel alloy• Solid silicone watertight gasket - will not deteriorate or shrink over time• Faster, simpler installation - Barbed tail ends provide plenty of room to hold multiple clamps

Replaces Detmar Thru-Hull Connectors

673For more information see: www.thmarine.com

For more information see: www.detmacorp.com

For more information see:www.attwoodmarine.com

FLOW-MAX™ BALL SCUPPER• Replaces worn out flapper scuppers.• 70% more drainage than competitive models.• New twist-off feature for clearing debris.• Retrofits all hole patterns.• Stainless steel lock screw for safety.• Seal slotted to fit over 1-1/4" motorwell tube.• Large 1-1/8" drain• Meets all ABYC specs.ORDER NO. Mfr. No. Description Colour205-11010 FMS-1-0-DP Ball Scupper, Clear205-11012 FMS-1-2-DP Ball Scupper, White

THRU-HULL CONNECTOR- with StrainerAccommodates 3/4" I.D. hose. Thru-hull connector with strainerprevents debris from entering and clogging the aerator pump.Strainer attaches to threads that extend beyond external retainingnut. Tough acetal construction.• Maximum hull thickness: 1-7/16"• Installation hole size: 1-1/16" to 1-1/8" diameterCaution: Do not use strainer as a thru-hull connectornut replacement, because doing so may causehazardous leaking.ORDER NO. 103-38860Thru-Hull with StrainerORDER NO. 103-38850Replacement Strainer Only

THRU-HULL FITTINGSDurable nylon plastic fittings suitable for

exhausting water from bilge pump or other sources.Ranges of styles and sizes to meet every requirement.

90° HOSE-TO-THREADCONNECTORfor 3/4'' I.D. hoseBarbed end accommodates 3/4" I.D. hose.Threaded female end fits TSUNAMI Seriesthreaded outlet. Acetal construction.ORDER NO. 103-38900 Mfr. No. 3890-3

4" THRU-HULL CONNECTORfor 3/4'' I.D. hose; WhiteThru-hull connector with 4" stem length forthicker transoms or hulls. Made with durablethermoplastic construction which preventselectrolysis.• Max. Transom thickness: 2"• Installation hole size: 1-1/16" to 1-1/8" dia.• Flange diameter: 2"ORDER NO. 103-38960 Mfr. No. 3896-3

HOSE CONNECTORBarbed end accommodates 3/4" I.D. hose.Threaded end fits TSUNAMI Series Threadedoutlet Acetal construction.ORDER NO. 103-38990 Mfr. No. 3899-3

MOTORWELL DRAIN TUBE• High strength polypropylene construction• Serrated snap fit installation• Installation hole diameter: 1" .• Fits transom thickness up to 2-1/4".ORDER NO. 101-10255 Mfr. No. 10-25-5PColour: White

CEACAP™ BULKHEADPASS-THRU FITTING• Watertight seal for cables, tubing or wires• Self-attaching - no hardware needed• Turn down washer included• Fits 3/4” hole - slot is 1/4" dia.ORDER NO. Mfr. No. Colour205-99010 TH-CC-1-DP Black205-99011 TH-CC-2-DP White

90˚ THRU-HULLCONNECTORSColour: White• For use where clearance is limited.• Prevents kinking of hose.• Installation hole diameter: 7/8"ORDER NO. Hose I.D. Fits Hull Thickness102-52400 3/4" Up to 15/16"

THRU-HULLS & DRAIN ACCESSORIES

674

LIVEWELL PUMPS

For more information see: www.xylemflowcontrol.com

• 12 Volt DC• Discharge nozzle can be rotated 360˚ for optimal installation• Pump housing can rotate 360˚ to allow positioning of the discharge outlet• Quick one hand "push button" motor cartridge removal system• Dual port fitting for optional washdown pump• ISO 8846 (Ignition Protection)

RULE LIVEWELL/BAITWELL PUMPSTournament Series™ Removable Motor Cartridge

• Silent Running & VibrationlessPumps will not scare the fish away!

• 1600 Gallons Per HourHighest capacity livewell pumps available

• Heavy Duty Long Life Motors• 1" NPT Female Intake

Allows for high capacity• Dual Port Pump / Model 209FDP# 777-20902Allows connection to washdown pump

• Robust Bronze Base / Model 209B#777-20901

• Anti-AirlockDesigned to eliminate air locks

MODEL NO. 209BBRONZE BASE1" NPT Female intake • 1-1/8" Discharge12 Volts - Amp Draw @ 13.6V7.0 - Amp Draw @ 12.0V - 4.8ORDER NO. 777-20901

MODEL NO. 209FDPDUAL PORT1" NPT Female intake • 1/2" NPTFemale optional dual port connection1-1/8" Discharge12 Volts - Amp Draw @ 13.6V7.0 - Amp Draw @ 12.0V - 4.8ORDER NO. 777-20902

1600 GPHTOURNAMENT SERIESHigh Capacity Livewell Pump 1600 GPH, Single Port,Bronze Base & Dual Port, Nylon Base

PERFORMANCE DATAGPH @ 0' GPH @ 3.0' GPH @ 6.0'

13.6 Volts 1600 GPH / 6056 LPH 1400 GPH / 5299 LPH 1200 GPH / 4542 LPH12.0 Volts 1300 GPH / 4920 LPH 1100 GPH / 4163 LPH 900 GPH / 3406 LPH

• Designed to install directly into any valve or fitting with 1" NPT threads• Pump must be installed below the water line

Model No. 209 FDPGlass Filled Nylon Dual Port BaseNote : 1/2” Plug included for installationsthat do not include a Washdown Pump

ORDER NO. Mfr. No. Description Outlet Amp Draw Fuse Size

777-04010 401C 500 GPH, Angled 4" Thru-Hull Fitting 3/4" 2.1 amp 2.5 amp

777-04011 401FC 500 GPH, Seacock Fitting 3/4" 2.1 amp 2.5 amp

777-04012 401STC 500 GPH, Straight 4-3/4" Thru-Hull Fitting 3/4" 2.1 amp 2.5 amp

777-04030 403C 800 GPH, Angled 4" Thru-Hull Fitting 3/4" 2.8 amp 5.0 amp

777-04031 403FC 800 GPH, Seacock Fitting 3/4" 2.8 amp 5.0 amp

777-04032 403STC 800 GPH, Straight 4-3/4" Thru-Hull Fitting 3/4" 2.8 amp 5.0 amp

777-04050 405C 1100 GPH, Angled 4" Thru-Hull Fitting 1-1/8" 3.3 amp 6.0 amp

777-04051 405FC 1100 GPH, Seacock Fitting 1-1/8" 3.3 amp 6.0 amp

777-04052 405STC 1100 GPH, Straight 4-3/4" Thru-Hull Fitting 1-1/8" 3.3 amp 6.0 amp

Model No.403STCStraight Thru-Hull Fitting

Model No.401CAngled Thru-Hull Fitting

Model No.401FCSeacock FittingTapered Thread

Model No. 209BBronze Base

Model No. 209FDPDual Port

675

OXYGENATOR SPRAY HEADRule’s Oxygenator Spray head sprays streams ofwater back into the livewell tank enriching the waterwith oxygen. Adjustable spray head allows you toincrease or decrease flow of water.For use with 3/4” (19mm) hose.ORDER NO. 272-00078Mfr. No. 78

VARIABLE FLOWCONTROL VALVEThe Variable Flow Control Valve allows increasesand decreases of flow from the pump with nodamage at all to the pump. Range includes fullyopen flow to zero flow.ORDER NO. 272-00075Mfr. No. 75

LIVEWELL PUMPDEBRIS STRAINERThe Livewell Pump Debris Strainerattaches directly to any pickup tubes onRule Livewell Pumps. Filters out trashand debris which could clog pump.Stainless steel wire mesh, 3/4” (19mm)female NPSM threads.ORDER NO. 272-00073Mfr. No. 73

ORDER NO. Mfr. No. Description272-00241 24TB 360GPH272-02500 25DTB 500GPH

Model 73

Model 78

Model 75


CHARGE N’ FLOW KIT - 12 VOLTA Fully Submersible and Rechargeable Portable KitThe new Charge n’ Flow pump is rechargeable, submersible and is designed for awide variety of applications, both onboard and ashore.The versatility of the pump along with multiple power options makes it the idealpump to keep on hand for any situation. Plus, with battery power and twoconvenient power options, it works wherever you need it.The Charge n’ Flow pump is very compact, only 5.5" (140mm) tall & 1.5" (38mm) in diameter.Kit Includes:• Pump with quick disconnect fitting and fuse• Battery terminal power adapter• Vehicle power adapter• 8' lay flat hose• Spray nozzle• Case with integrated battery• Battery Charger

HIGH SPEED INFLATOR/DEFLATORThe Rule High Speed inflator/deflator inflates a typical 4 man dinghy in as little as one totwo minutes. Adjustable nozzles have been included for most inflatables and valves types.

• 12 Volts, 25 amps, maximum 2.6psi, 20 CFM• 10' (3m) cable length with battery clips• Pre-lubricated and sealed bearings to ensure long life• Robust fan drive belt for long life• Adjustable nozzles for most inflatables and valve types included•Grip pad for one handed operation

ORDER NO. 777-02800Mfr. No. RP280KR

ORDER NO. 272-00200Mfr. No. id20

Features:• Pumps fresh water, sea water, diesel and anti-freeze•Diesel refueling and transfer• Pumps up to 100 gallons (379 L) per charge•Maximum Pump Volume: 280 GPH•Charging Time: 10 to 12 Hours• All components are enclosed in a convenient carrying case

TRANSOM MOUNT LIVEWELL PUMPSRule introduces a lineup of Transom Mounted Aerator Pumps. This allows the fisherman to haveprofessional aeration of his livewell without the need to install a pump through the hull. The unique"quick-release" pump with strainer base assembly snaps easily into the transom bracket provided. Atthe end of the day, the pump can be removed for storage. Pumps feature 6' wire leads.

LIVEWELL/PORTABLE AERATOR KITRule introduces a 12 volt Portable Aerator Kit. Aerates from 5 to 30 gallons of water. The Rule 460gph pump attaches easily with suction cups to any non-porous surface. 9" long spray tube can becustom cut to fit into any container. A fully adjustable spray head increases or reduces flow of water.Foam filtration system keeps water sparkling clean. The kit also includes battery clips for easyattachment to your 12 volt power source.ORDER NO. 272-02020Mfr. No. # 202K

LIVEWELL/AERATOR/MISC. PUMPS

676For more information see: www.attwoodmarine.com

Tsunami aerator pumps are durable, designed to last and deliver high output from a small package.Efficient design circulates water around the pump motor housing, helping to absorb the heat givenoff by the operating motor.• Moves more water and oxygen into livewell tanks to keep fish active• Cooler-running motors, premium materials, watertight seals and waterproof wiring• Cartridges are replaceable and interchangeable• No mounting brackets necessary• NMMA and CE certified• Three year warranty

ORDER NO. Mfr. No. InletLength

InletDia. A B C D E F G H

104-46727 4672-7 3-1/2" 3/4" 3-1/4" 3" 4-1/8" 4-1/4" 4" 3/4"-14 NPSM 3/4" Barbed.554" I.D. 3/4" -14NPSM .620" I.D.

104-46707 4670-7 3/4" 3/4" 1-1/4" 7/16" 4-1/8" 4-1/4" 4" 3/4"-14 NPT 3/4" Barbed.554" I.D. 3/4" -14NPSM .620" I.D.

Model # 4670-7

Supply Two Livewells Rinse Hose plus Livewell

Model # 4672-7

A

F

B

E

C

D

H

A multi-function pump.Proven Performance• The Tsunami second outlet is integrated into thepressure chamber, so it looks and pumps likepart of the aerator• Beneath the standard 3/4" barbed outlet, there's asecond hose-threaded outlet on the pressurehousing• Both outlets are engineered for the precise positionand angle that will deliver optimum performance

Output & Performance• Get twice the value because the new dual outletTsunami Aerator is actually a multifunction pump• You get separate outlets for two livewells• Run a livewell and a separate low-pressurewashdown outlet• Three-year warranty

TSUNAMI® DUAL OUTLET AERATOR PUMPS

TSUNAMI® AERATOR PUMPS

DimensionsModel No A B C D E F GT500 3-1/2" 1-1/2" 3" or 1" 3-1/4" 2-7/8" 3-5/8" 3/4" - 14 NPSM 3/4" - 14 NPSMT800 3-1/2" 1-1/2" 3" or 1" 3-7/8" 3-1/4" 4" 3/4" - 14 NPSM 3/4" - 14 NPSMT1200 3-1/2" 1-1/2" 3" or 1" 4" 3-1/4" 4-7/8" 1-3/8" - 12 UNF 1-3/8" - 12 UNF

ORDER NO. Mfr. No. Model No. GPH Volts Amp Draw@ 12V Fuse Size Hose Dia. Repl. Cartridge

104-46400 4640-7 T500 500 12 V 1.4 3 A 3/4" ID 104-46200

104-46500 4650-7 T800 800 12V 2.5 4 A 3/4" ID 104-46220

104-46600 4660-7 T1200 1200 12V 3.0 5 A 1-1/8" 104-46240

High Pressure Washdownplus Livewell

AERATOR PUMPS


TSUNAMI® RECIRQ AERATOR KITThe Tsunami Recirq Kit recirculates livewell water to keep it cooler and rich inoxygen. This self-contained system feeds a separate aerator spray head andworks even while you are underway and cannot use a thru-hull connection.Add this kit to any tank that already has a freshwater fill system. Or use as abackup pump for a fail-safe system.

Recirq Kit Includes:• 500 GPH Tsunami aerator pump with short inlet, threaded outlet• Aerator spray head• Stainless steel strainer• 2 plastic hose clamps• 3/4" diameter 23" poly hose• Straight thread-to-barb connector

LIVEWELL AERATOR SWITCHProvides on/off or cycling of aerator pump to extend battery life.Solid-state cycle module switches pump to on,or to a run time of 30 seconds on/3 minutes off.Includes face plate for panel mounting.For 12 Volt DC. 10 amp maximum.• 1-1/4" L x 1-1/4" W• Installation hole size: ½" diameter• Depth behind panel: 3-1/4"

ADJUSTABLE AERATOR SPRAY HEADUse on livewells that have built-in overflows or recirculating systems. Mounts on side of tank.90˚ fitting for installation in tight spaces. Rotating head with O-ring adjusts and maintains flow setting.Removable head has an “ interference-fit thread design” that will not allow it to vibrate or blow out.Polypropylene construction. Can be installed on tanks with up to 5/8" wall thickness.

ORDER NO. 104-41250Mfr. No. 4125-7

SINGLE VALVESPRAY HEADFor output from an aerator pump into the livewell.

ORDER NO. 104-41181Mfr. No. 4118A5

NON-ADJUSTABLE AERATOR SPRAY HEADFor use on livewells that have built-in overflows or recirculating systems.Available in double and single valve models, multi-port spray maximizes oxygenlevel in the livewell.Constructed of ABC plastic.

DOUBLE VALVESPRAY HEADDouble valves allow aerating options – one end can be used forfreshwater fill, the other end with a recirculating pump. Mounts ontop or side. Multi-port spray maximizes oxygen level in the livewell.Constructed of ABC plastic.

ORDER NO. 104-41180Mfr. No. 4118-5

LIVEWELL/BAITWELL FITTINGS

ORDER NO. 104-42530Mfr. No. 4253-7

ORDER NO. Mfr. No. Description101-14292 14292-3 3-Position Switch On/Off/Cycle

AERATOR PUMPS & ACCESSORIES

678

Basspirator II SystemInstallation kit for new aerating system offering the advantage ofcontinuous replenishment of fresh water to the live well.Kit includes:• 500 GPH Basspirator II™ cartridge aerating pump• Two 1-1/2” overflow fittings and hose• 7 feet of 3/4” I.D. bilge hose• 16 gauge wire ( brown & black )• Attractive dash switch with indicator light and built-in fuse holder• Aerating head single valve• 4 hose clamps• Transom shim ( # 847-71245 )for boats with angled transom• Complete illustrated instructionsORDER NO. 847-34014

ORDER NO. Model No. Description GPH Amp Draw Fuse Size Hose Size Repl. Cartridge847-28503 28503 Aerator Straight Inlet 500 2.0 5 Amp 3/4" 847-28552847-28703 28703 Aerator Straight Inlet 750 3.0 5 Amp 3/4" 847-28572847-38503 38503 Aerator 90˚ Inlet 500 2.0 5 Amp 3/4" 847-28552847-38703 38703 Aerator 90˚ Inlet 750 3.0 5 Amp 3/4" 847-28572

In-well Aerator SystemInstallation kit for new aerator system offering the advantage of continuousrecirculation of the livewell water. Ensure good aeration of the livewell whenthe boat is on the trailer or on the plane going to the next fishing holeKit includes:• Reliable 500 GPH cartridge recirculating pump with 90˚ outlet• 16 gauge wire ( brown & black )• Illuminated & fused dash switch panel switch• Aerating head double valve• 3/4” I.D. thru-hull• 3 feet of 3/4” I.D. bilge hose• Complete illustrated instructionsORDER NO. 847-34024

INTAKE STRAINERAttaches directly to intake tube on Johnson Aerator Pumps.Filters debris which could clog pump.

ORDER NO. 671-77125 Mfr. No. 77125

BASSPIRATOR II™ - CARTRIDGE AERATOR SERIESInternal anti-airlock fins help prevent air lock ensuring a good even flow of water to the livewell.These powerful and efficient pumps, are available in 500 and 750 GPH flow capacities, have proventhemselves to be trouble free providing excellent life expectancy so you can enjoy your time fishing.General Features:• Fully submersible• Ignition protected• 12 Volt• Dura-port discharge ports• Anti-airlock protection• Seawater tough• Removable motor cartridge feature allows for easy cleaning and maintenance

• 100% factory tested• Meets and exceeds NMMA, ABYC, ISO 8846,• CE and USCG specificatons• 3-year warranty

AERATING HEADS & FITTINGSShown here are some of the more popular designs used as standard equipment by leading bass boat manufacturers.Our variety of fittings allows for all shapes and configurations so we can custom design an aerating head foryour boat production requirements. Spray Head Assembly

Overall length 12-3/4", 3/4" thruhull, one shut-off valveORDER NO. 847-90331

Spray Head AssemblyOverall length 13", 3/4" thru hull,one shut-off valveORDER NO. 847-90191

Spray Head AssemblyOverall length 9-3/4", 3/4" thru hull,one shut-off valveORDER NO. 847-90511

2-Piece Spray Head Assembly8" spray bar with 3/4" barb,6" shut-off valve assembly with 3/4"barb and 3/4" thru hullORDER NO. 847-90261

3800 Series

For more informationsee: www.johnson-pump.com

ICE CHEST AERATOR• 400 GPH pump• Flexible hose• Aerating head with mounting clip• Stainless steel shaft and hardware• 2.0 amp draw use 3 amp fuse• Ignition protected• Stainless steel shaft and hardware• 12 Volt

• Anti-Airlock protection• Saltwater tough• 100% factory tested• Meets and exceeds NMMA, ABYC, ISO8846, CE and USCG specifications• Three year warrantyORDER NO. 847-24052

LIVEWELL SYSTEM KITS

NO. 90511

NO. 90191

NO. 90331

NO. 90261

2800 Series

AERATOR PUMPS & ACCESSORIES

679

TSUNAMI SERIES BILGE PUMPSBoaters, boat-builders, and dealers all want one thing from their bilge pumps morepower! And that's what the Tsunami® Series delivers with high-capacity, high-efficiencyoutput. Tsunami Cartridge pumps have replaceable / interchangeable motor cores.Makes servicing simple and quick.• No brackets required• Cooler-running motors, premium materials, watertight seals & waterproof wiring• One-hand access• Cartridges are replaceable and interchangeable• NMMA and CE certified • 3-year warranty


Tsunami 1200Cartridge Bilge Pump

Tsunami 500 CartridgeBilge Pump

ORDER NO. Mfr. No. Model No. GPH Volts Amp Draw Height Width Hose Dia. Replacement Cartridge@ 12V

104-46060 4606-7 T500 500 12 VDC 1.4 3-5/8” 2-3/4” 3/4” ID 104-46200104-46080 4608-7 T800 800 12 VDC 2.5 4-3/8” 3-1/8” 3/4” ID 104-46220104-46120 4612-7 T1200 1200 12 VDC 3.0 4-3/8” 3-1/8” 1-1/8” ID 104-46240

ORDER NO. Mfr. No. Model No. GPH Volts Amp Draw @12V Hose Dia.104-45050 4505-7 S500 500 12 VDC 1.2 3/4" ID104-45070 4507-7 S750 750 12 VDC 2.5 3/4" ID104-45110 4511-7 S1100 1100 12 VDC 3.4 1-1/8" ID

SAHARA AUTOMATIC BILGE PUMPSSahara Bilge Pumps include 36" lengths of 16-gauge tinned copper wire. Wire is caulked to prevent waterfrom wicking through insulation jacket. All materials and components are state-of-the-art. Permanentmagnet motor, stainless steel shaft, and steel-reinforced seal ensure powerful, durable performance.Mercury-Free Design. Does not harm the environment!

• All-In-One pump • NMMA and CE certified• Fast, easy installation • All models are same compact size• High-efficiency motor • 3-year warranty• Dependable internal float switch • Dimensions: 5-1/2”L x 3-1/4”W x 4”H

Mercury free

ELECTRIC BILGE SWITCH - S3 SERIES• Fully Sealed Electronics - No moving parts• 12V - Digital• Solid State Electronic Sensing Technology to detect bilge water levels & trigger pump activation• Won’t be exposed to continuous cycling• Can be mounted on the floor of the bilge directly to a stringer alongside the basket of the pump• Directly compatible with competitive products

ORDER NO. Mfr. No.104-48010 4801-7

104-47600

104-47300

HEAVY DUTY BILGE PUMPSAttwood’s new line of heavy-duty, high-capacity bilge pumps have unsurpassed durability,adjustability and performance in a compact design. These powerful pumps keep waterwhere it belongs – outside your boat.

Features:• Heavy-Duty Bilge Pump• Available in 2 flow capacities: 1700 GPH and 2000 GPH• Fully-adjustable outlet and base configuration• High-efficiency permanent magnet motor• Molded two-wire seal eliminates a potential leak path

Benefits:• Quick and easy installation• Tough, dependable performance in a small package• Designed to out-perform• Tested relentlessly to deliver reliable, efficient performance

ORDER NO. Mfr. No. Description

104-47300 4730-1 1700-GPH – 12VDelivers a true 1700 GPH at open flow while drawing less than 6-amps104-47600 4760-1 2000-GPH – 12VDelivers over 2000 GPH at open flow while drawing less than 7-amps

BILGE PUMPS & ACCESSORIES

680For more information see: www.xylemflowcontrol.com

AUTOMATIC BILGE PUMPSComputerized operation on the principle of impeller resistance. Float switches are not required. The pump will turn on every2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continueto run until all water is removed. Thereafter, it will check for water every 2-1/2 minutes. Power use in the checking mode is minimal.

ORDER NO. Mfr. No. GPH Volts Amps@12v Height Width Hose Dia. ID Panel Switch Hose Adapter272-00251 25S 500 12 DC 1.9 4" 2-3/8" 3/4" 272-00049272-00271 27S 1100 12 DC 3.3 4-1/2" 2-3/8" 1-1/8" 272-00049 272-00069**Converts 1-1/8" pump outlet to 3/4" ID hose

ORDER NO. Mfr. No. Capacity GPH Volts Amps@ 12V Height Width Hose Dia. ID HoseAdapter272-00024 24 Round 360 12 DC 2.1 3-1/2" 2-3/8" 3/4" -272-00025 25D Round 500 12 DC 1.9 3-1/2" 2-3/8" 3/4" -272-00020F 20F Square 800 12 DC 2.8 4" 2-7/8" 3/4"272-00020R 20R Round 800 12 DC 2.8 3-3/4" 2-3/8" 3/4"272-00027 27D Round 1100 12 DC 3.3 4-1/4" 2-3/8" 1-1/8" 272-00069**Converts 1-1/8" pump outlet to 3/4" ID hose

500G.P.H. Pump

500 G.P.H. Pump

800 G.P.H.Pump Square

ORDER NO. Mfr. No. Description Volts Hose Size Dimensions Amps

272-05000A RM500A 500 GPH, (1893 lph) 12 V 3/4" 4.5" H x 6" W 2.0

272-00500A-24 RM500A-24 500 GPH, (1893 lph) 24 V 3/4" 4.5" H x 6" W 1.0

272-07500A RM750A 750 GPH, (2839 lph) 12 V 3/4" 4.5" H x 6" W 2.7

272-00750A-24 RM750A-24 750 GPH, (2839 lph) 24 V 3/4" 4.5" H x 6" W 1.4

272-11000A RM1100A 1100 GPH, (4162 lph) 12 V 1-1/8" 4.5" H x 6" W 3.4

272-11000A-24 RM1100A-24 1100 GPH, (4162 lph) 24 V 1-1/8" 4.5" H x 6" W 1.7

ORDER NO. Mfr. No. Description Volts Hose Size Dimensions Amps

272-15000 RM1500 1500 GPH, (5676 lph) 12 V 1-1/8" 6" H x 7-1/4" W 4.8

272-20000 RM2000 2000 GPH, (7568 lph) 12 V 1-1/8" 6" H x 7-1/4" W 8.4

272-20000-24 RM2000-24 2000 GPH, (7568 lph) 24 V 1-1/8" 6" H x 7-1/4" W 4

Note: # 272-05000A replaces # 272-05000 / # 272-07500A replaces # 272-07500 / # 272-11000A replaces # 272-11000.

1100 G.P.H.Pump

• Submersible • Ignition protected• High efficiency, low amp motor • No burn-out when dry• Stainless Steel shaft

No Float Switch Required!The NEW eco-friendly Rule Mate series of Bilge pumps feature a solid statewater sensing technology that eliminates the need for a separate float switch.When water enters the bilge and reaches a certain height (2-3/4 inches, 70mm) asensor turns the pump on. After the water is pumped out, another sensor shutsthe pump off. The sensor’s unique “field effect” technology is eco-friendly becausethey only sense the dielectric constant of water. In the event of an onboard oil spill,straight motor oil that enters the bilge will not turn the pump on. The result is themost technically advanced and ecofriendly bilge pump available in the marketplace.It’s part of Rule’s continuing commitment to preserving our navigable waterways.

RULE-MATE SERIESFULLY AUTOMATED BILGE PUMPS - VDC Features and Benefits

• All-in-one pump and switch- No float switch required

• Pump turns on when water level rises & shuts off whenwater is removed

• Will not pump oil- Straight motor oil that enters the bilgewill not turn the pump on

• Snap-off strainer for easy cleaning• Straight and 90° hose barb included• Anti-Fouling Impeller• The new Rule Mates are available in 500, 750, & 1100 GPH• Original Rule Mates are available in 1500 & 2000 GPH• Limited 3 year warranty

NON-AUTOMATIC BILGE PUMPSTraditional non-automatic bilge pumps are operated by theuse of a control switch to sense water and activate the pump.

RULE-MATE FULLY AUTOMATED BILGE PUMPS - VDC• All-in-one pump and switch • Saves installation time and space in the bilge• Extra long-life heavy duty motor • Environmentally safe, non-contact, mercury-free float switch

BILGE PUMPS

681

BRACKET MOUNTFOR ROUND VERSION PUMPSPermits small Rule bilge pumps to be sidemounted to a vertical stringer, a bulkhead or atransom. Use this bracket when bottommounting is inconvenient or impossible.Simply remove the strainer from the pump,put the bracket in place, and reassemble.ORDER NO. 272-00066Mfr. No. 66

Bracket Mount for 360, 500, 1100 G.P.H. Pump

500 G.P.H. Pump

RULE COMBO PACKA top quality Rule pump teamed up with new mercury free float switch. Unbeatable quality at a great price.

• Model 24-35A includes 360 GPH pump (272-00024) with Mercury-Free Rule-A-Matic Switch (272-00035-1)• Model 25-40A includes 500 GPH pump (272-00025) with Mercury-Free Rule-A-Matic Plus Switch (272-00040-1)• Model 20-35A includes 800 GPH pump (272-00020R) with Mercury-Free Rule-A-Matic Switch (272-00035-1)

ORDER NO. Mfr. No. Description Hose Size272-24350-1 24-35A 360 GPH Pump with Rule-A-Matic® Switch 3/4"272-25400-1 25-40A 500 GPH Pump with Rule-A-Matic® Plus™ Switch 3/4"272-20350 20R-35A 800 GPH Pump with Rule-A-Matic® Switch 3/4"

360 G.P.H. Pump

800 G.P.H. Pump


ORDER NO. Mfr. No. Capacity GPH/lph Volts Amps Size Hose Dia. ID Panel Switch Float Switch Hose Adapter272-00002 02 1500 (5676 lph) 12 V 4.8 6" x 4-1/4" 1-1/8" See Note 1 See Note 3 272-00069*272-00003 03 1500 (5676 lph) 24 V 2.3 6" x 4-1/4" 1-1/8" See Note 2 See Note 3 272-00069*272-00010 10 2000 (7568 lph) 12 V 8.4 6" x 4-1/4" 1-1/8" See Note 1 See Note 3 272-00069*272-00011 11 2000 (7568 lph) 32 V 3.1 6" x 4-1/4" 1-1/8" See Note 2 See Note 3 272-00069*272-00012 12 2000 (7568 lph) 24 V 4 6" x 4-1/4" 1-1/8" See Note 2 See Note 3 272-00069*272-00014** 14A 3700 (14002 lph) 12 V 15.5 7-1/4" x 4-7/8" 1-1/2” See Note 1 See Note 3272-00016A 16A 3700 (14002 lph) 24 V 6.9 7-1/4" x 4-7/8" 1-1/2” See Note 2 See Note 3 -

SUBMERSIBLE BILGE PUMPS - VDCRule submersible bilge pumps have set the standard for the industry for decades.They are the first choice of yachtsmen and commercial fishermen throughout the world.• Easy clean snap-lock strainer • Silent and vibrationless operation• Anti-airlock protection • Compact, efficient long life motor• Ignition protected • No burn-out when run dry• Rust and corrosion protection • Used by leading boat builders worldwide• Marine grade blocked wiring

Note 1 – Panel Switch options are 272-00041, 272-00045 or 272-00049Note 2 – Panel Switch options are 272-00045 or 272-00049

Note 3 – Float Switch options are 272-00035-1 or 272-00037-1* Converts 1-1/8” pump outlet to 3/4"” ID hose** Heavy duty construction for both commercial and pleasure boat use.

1500 G.P.H.Pump

BRACKET FOR VERTICALMOUNT VERSION PUMPSBracket Mount for old style Rulemate pump modelsRM500, RM750, RM1100, RM1500, RM2000

ORDER NO. 272-00099Mfr. No. 99

SIDE MOUNT BRACKETw/ Plastic strainerBracket Mount for new style Rulemate pump modelsRM500A, RM500A-24, RM750A, RM750A-24, RM1100A, RM1100A-24

ORDER NO. 272-00099A Mfr. No. 99A


Mercury free

682

PWC PUMPS & ACCESSORIES

BILGE MATEA low budget alternative designed for long life and high performance capacity.The low cost choice for boat owners who still look for qualityGeneral Features• 400 GPH• 3/4" discharge port• Stainless steel shaft and hardware• 2.5 Amp draw use 5 amp fuse• Ignition protected• 12 Volt• Anti-Airlock protectionORDER NO. Mfr. No. GPH Volts Amp Draw Hose Dia.847-21404 21405 400 12 2.5 3/4”



For more information see: www.johnson-pump.com

PERSONAL WATERCRAFT PUMPON/OFF SWITCHWater resistant and designed to offer on-demand use of Rule Personal Watercraft Pumps.It features a compact design, a water resistant toggle mechanism and a marine stainless steel face plate.

Model 49PWCORDER NO. 272-60049

PERSONALWATERCRAFTAUTOMATIC 500 GPHPUMPWill automatically remove water from theengine compartment, without the use of afloat switch. The pump automaticallychecks for water, and if present, continuespumping until all the water is removed. Itscompact design (2-3/4" wide, 4" high)allows it to fit in the tightest of spaces.The pump is of the highest quality andfeatures 6' wire leads for easy installation.

Model 25S-6WCORDER NO. 272-61251

MARINE SWITCH PANELSThese rocker switch panels are available in an attractive black texturedfinish. Select between two position and three position models with orwithout illumination.All lighted models are complete with silicon seal boot.Models 44960-0002 and 44960-0003 include durable stick-on labelsfor all popular boat systems. Includes mounting screws.

44960-0002Illuminated withBoot SPST

44960-0003Non-illuminated withBoot SPST

ORDER NO.. # POSITION ELEC. RATING44960-0002 2 (on, off, lighted) 10 amps/12 Vdc44960-0003 2 (on, off, unlighted) 10 amps/6-32 Vdc/10 amps/110 Vac

PERSONAL WATERCRAFTMANUAL 500 GPH PUMPRemoves water from the engine compartment.This pump can be activated by a Rule PersonalWatercraft Pump On/Off switch for on-demanduse. When water has been removed from theengine compartment, simply turn the pumpoff. Its compact design (2-3/8" wide, 3-1/2"high) allows it to fit in the tightest of spaces.The pump is of the highest quality andfeatures 6' wire leads for easy installation.

Model 25D-6WCORDER NO. 272-60025

683

BILGE PUMP ACCESSORIES


HI-WATER BILGE ALARMThe High Water Bilge Alarm consists of a non-mercury float switchand an in-dash gauge that features both a visual and an audible85 db alarm. This unit allows an unmanned compartment to beconstantly monitored. For additional compartments add additionalRule Float Switches. Complies with CFR 182.530 which requires avisual and audible alarm in each unmanned space on commercialvessels at least 26’ (7.9m) in length.12 VDC

ORDER NO. 272-00331-1Mfr. No. 33ALA

RULE-A-MATIC® FLOAT SWITCHYear after year, the Rule-A-Matic has been the switch of choice forboaters the world over. Our latest design now includes a removablebase for easy cleaning and servicing, a mercury free snap switchtested to over one million cycles and marine grade “blocked” wire.Designed for pumps drawing up to 14 Amps at 12VDC.Includes a 2 year warranty.See switch specifications below.

ORDER NO. Mfr. No. Description272-00035-1 35A Rule-A-Matic® Switch

SWITCH ADAPTERAdapter to attach Rule SuperSwitch™or Rule-A-Matic® Switch to Rule1500 GPH, 2000 GPH and 5-year pumps.


SWITCH ADAPTERAdapter to attach Rule SuperSwitch™to Rule 3700 & 4000 GPH pumps.


#65

#64

RULE-A-MATIC® PLUS™ FLOAT SWITCHSleek and rugged, the Rule-A-Matic Plus float switch has a strong, fullyintegrated, impact resistant cover, which protects against debris andjamming. 14 gauge highly abrasive resistant marine grade wire, and abuilt-in test feature. Designed for pumps drawing up to 20 Amps.Includes a 2 year warranty.See switch specifications below.

ORDER NO. 272-00040-1Mfr. No. 40A

Switch SpecificationsORDER NO. Mfr. No. Description Volts Max Amps(12V) Size (Inches)(L x W x H)272-00035-1 35A Rule-A-Matic® 12-24-32 DC 14 4-1/2" x 1-1/2" x 2"272-00037-1 37A SuperSwitch™ 12-24-32 DC 20 5" x 2" x 2"272-00040-1 40A Rule-A-Matic Plus® 12-24-32 DC 20 4-7/8" x 2-1/2" x 2-3/4"

SUPERSWITCH™ FLOAT SWITCHMercury SuperSwitch™ is designed for the toughest applications.Design includes marine grade 14 gauge “blocked wire”, larger floatfor increased buoyancy, removable base for easy servicing and a snapswitch design capable of handling pumps drawing up to 20 amps.See switch specifications below.Backed by a 5 year warranty

ORDER NO. Mfr. No. Description272-00037-1 37A SuperSwitch™

Mercury free

Mercury free

Mercury free

Mercury free


ORDER NO. Mfr. No. Description272-00057 57 Adapts all Rule Pumps with 1-1/8"

outlet to 1" NPT272-00058 58 Adapts all Rule Pumps with 1-1/2"

outlet to 1-1/4" NPT

3-WAY PANEL LIGHTEDSWITCH(12 VDC)Controls any pump equipped with anautomatic float switch. Toggle has threepositions: (automatic, off and manual) and has aspring return to “off” from the “manual” position.Panel is black stainless steel and has redindicator light and fuse holder.

3-WAY PANELSWITCH(12/24/32VDC)Similar to the Lighted Panel Switch but withoutindicator light or fuse holder. The “manual”position has a “fail-safe” spring return to “off”so you can’t leave your pump running byaccident. Black stainless steel panel.

2-WAY PANELSWITCH(12/24/32VDC)Attractive black stainless steel panelhighlights your control panel.Simple “on” or “off” positions providefingertip control.

ORDER NO. 272-00041Model 41



STAINLESS STEELDEBRIS STRAINERExtra measure of protection for use on roundbased Rule pumps up to 3700 GPH (14010LPH). Installs directly into existing strainer.Filters out excess debris and helps preventjamming and failure.


90° ELBOW ADAPTERS90˚elbow adapters are designed for rigid pipe installations ofSump and Utility Pumps. Adapters snap onto discharge port.Opposite end is female pipe threaded. High impact plastic willnot rust, corrode or discolor.

ADAPTERSDesigned to be used with Rule Pumps and thru-hulls. Heavy-duty molded,non-corrosive, high impact plastic.ORDER NO. Mfr. No. Description272-00063 63 Bulkhead adapter - adapts 1-1/2" hose to

standard garden hose fitting.272-00067 67 Hose adapter - adapts 1-1/2" outlet

to 1-1/8'' hose272-00068 68 Garden hose adapter - adapts 1-1/8" outlet to

standard garden hose fitting.272-00069* 69 Double stepped straight adapter for adapting

1-1/8'' outlet to 3/4'' or 5/8'' I.D. hose.

Hose Adapter for1-1/2" pump outlet to1-1/8" hose# 272-00067

Garden Hose Adapter# 272-00068

PANEL SWITCH SPECIFICATIONSORDER NO. Mfr. No. Description Volts(DC) Max Amps (DC) Size (Inches)272-00041 41 3-Way Panel Light Switch 12 20 3-1/4" x 2"272-00045 45 3-Way Panel Switch 12/24/32 20 2-1/4" x 2"272-00049 49 2-Way Panel Switch 12/24/32 20 2-1/4" x 2"

Bulkhead adapter1-1/2" Hose to3/4" Garden Hose.# 272-00063

*Not suitable for Rule-Mate Pumps

UNIVERSAL PUMPADAPTERAllows all Rule 360 (1360), 500 (1893),800 (3028) Round and 1100 GPH (4164LPH) pumpsto be mounted to competitive bases:Attwood® V-500, Mayfair Proline 500 (1983), 750(2839), 1000 (3785), and West Marine 500 (1983),750 (2839) and 1000 GPH (3785 LPH) models.


Double SteppedStraight Adapter# 272-00069

BILGE PUMP ACCESSORIES

685

AUTOMATIC FLOAT SWITCHFOR A BETTER AND SAFER LIFE AFLOAT!For full automatic bilge pumping operation, connect the automaticswitch to your bilge pump. The AS888 has a time proven micro switchwithout mercury. When water exceeds the acceptable level, the pump isturned on by a rolling steel ball, which changes the pressure on themicro switch.• Can be mounted to all Johnson Pump submersible bilge pumps

through the clip-on “T-slot” & can be used with 6, 12, 24,or 32 Volt systems

• Non-clogging switch• No false starts• Saltwater tough• Easy to clean• Pre-wired for manual override• Universal mounting plate• Max Amp: 15 AMfr. No. 26014ORDER NO. 847-26014



104-42010 104-42020

ELECTRONIC FLOAT SWITCHThe Electronic Float Switch is built on the same concept as theswitch on Cartridge Duo. As a separate accessory it is possible toattach the switch to all pumps in Johnson Pump L- Series.• 12 Volt• Can be mounted to all Johnson Pump submersible bilge pumps• Can be used with 6, 12, 24, or 32 Volt systems• Non clogging switch• No false starts• Saltwater tough• Easy to clean• Pre-wired for manual override• Universal mounting plate• Max Amp: 15 AMfr. No. 36152ORDER NO. 847-36152

AUTOMATIC FLOAT SWITCHESThe Automatic Float Switch converts any bilge pump that draws 12 amps (at 12 VDC) or lessto fully automatic operation. It features a compact, low-profile design that mounts on anysurface from horizontal up to a 24° angle. No large voltage drop which reduces bilge pumpoutput. Incorporates a reliable and affordable mechanical switch that actuates pump motor at2" water level. Wire leads do not flex or hinge with the float. Integral cover dampens bilgesloshing to reduce pump cycling, and prevents debris interference. Sealed switch mechanismresists moisture, fume ignition and electrical shock. Contains no mercury, a "Persistent ToxicSubstance" listed as a health hazard. CE rated.Float switch installs independently or directly onto the rear slots of the V-Series pump bracket.Features a convenient test knob to test pump operation.

ORDER NO. Mfr. No. Description104-42010 4201-7 Float switch with cover 12 and 24 Volt104-42020 4202-7 Float switch 12 and 24 Volt109-11844 911844-7 Float switch cover only

GENERAL PURPOSE CENTRIFUGAL PUMPSThe Rule General Purpose Pump is designed for use as a washdown pump and/or to circulate water to yourlivewell tank(s). Heavy duty construction for use on commercial or pleasure boats. 1-1/2" (38mm) dischargeoutlet. This pump must be mounted below the waterline. It does not deliver high pressure, nor is it self-priming.It delivers lots of water but at low pressure. 12 volts DC. Non-Automatic.

ORDER NO. Mfr. No. Capacity GPH Volts Amps

272-00017 17A 3800 12 DC 20.0

Height. Width Hose Dia. ID Panel Switch Float Switch

5-1/4" 8-1/2" 1-1/2" 272-00049 N/A


Mercury FreeMercury Free

FLOAT SWITCHES/PUMP

686For more information see: www.www.johnson-pump.com

ORDER NO. Mfr. No. Description Capacity3ft (0.9m) Head (13.6 V)

CapacityStraight (13.6 V) Amps Fuse Size Hose Size

671-47258 32-47258-003 600 GPH, 12V 32 L/min - 500 GPH 38 L/min - 600 GPH 2.5 A 5 A 3/4”

671-47259 32-47259-003 800 GPH, 12V 38 L/min - 600 GPH 51 L/min - 800 GPH 3 A 5 A 3/4”

671-47260 32-47260-003 1000 GPH, 12V 44 L/min - 700 GPH 64 L/min - 1000 GPH 3.2 A 5 A 3/4”

671-47261* 32-47261-002 1250 GPH, 12V 51 L/min - 800 GPH 79 L/min - 1250 GPH 3 A 5 A 1-1/8” &1-1/4”

ORDER NO. Mfr. No. Description Capacity3ft (0.9m) Head (13.6 V)

CapacityStraight (13.6 V)

AmpDraw

FuseSize

Hose BarbSize I.D.

671-75030 7503 500 GPH Ultima Combo 3/4” Dura Ports 33 L/min - 525 GPH 40 L/min - 630 GPH 2.5 A 5 A 3/4”

671-77030 7703 750 GPH Ultima Combo 3/4” Dura Ports 44 L/min - 700 GPH 50 L/min - 800 GPH 3 A 5 A 3/4”

671-79030 7903 1000 GPH Ultima Combo 3/4” Dura Ports 50 L/min - 800 GPH 63 L/min - 1000 GPH 3.2 A 5 A 3/4”

671-82030 8203 1250 GPH Ultima Combo 1-1/8” Discharge 60 L/min - 952 GPH 73 L/min - 1150 GPH 3 A 5 A 1-1/8”

The Ultima Combo combines the line of Cartridge BilgePumps with automatic operation. The pump is equippedwith the new Ultima Switch.• 12 Volt• Submersible bilge pump with Ultima switch• Complete with Dura-Port discharge ports to eliminate

stress cracking caused by over-tightened hose clamps• Includes both straight and a 90º smooth elbowDura-Port

ULTIMA SWITCH

Automatic bilge pump switch 12/24V DC 20 amp draw.Detects fluid using the patented Mirus™ "field effect" technology.Features:• 3-year warranty• Turns pump on at 2" fluid level• Turns pump off at 3/4" fluid level• Not effected by oil, fuel or debris• Reverse wire protection• 12/24V DC operation• Handles all pumps up to 20 amp draw• Meets ISO 8846, ABYC, NMMA and USCG

ORDER NO. 671-36303Mfr. No. 36303

Integration of the patented Ultima “field effect“ sensingtechnology into the bilge pump body creates a sleek,reliable compact, unit ready to install and run for yearsand years of unerring service.• Rugged ABS Fuel-Resistant Housing• Featuring - Patented Digital “Field Effect”• 12 Volt• Ultima™ 600GPH - 1000GPH, Easy to-install Dura-Port

discharge ports to eliminate stress cracking caused byover-tightened hose clamps & also includes both astraight & a 90º smooth elbow DuraPort

*Does not include dura-port connection

671-47261

• All versions include a removable check valve• Replaceable cartridge design• Pre-wired for auto operation as well as

manual override• Non clogging pump and switch• Water-cooled motor• Free and easy flow• Salt water tough• Easy to clean

ULTIMA BILGE™ COMBO PUMP

ULTIMA BILGE™Mercury Free design with no moving parts

Mercury Free design with no moving partsBILGE ALERT™High Water Alarm.A new level of high water protection. 100db alarm and LED warninglight alert you to bilge water levels above normal conditions.Detects fluid using the patented Mirus™ "field effect" technology.Features:• 100db alarm and LED warning light• Completely sealed and corrosion proof• Three way panel switch Test/Armed/Off• No moving parts• Easy to install• 12VDC• Meets ISO 8846, NMMA, USCG & ABYC requirements• Ignition protected• 3-year warranty

ORDER NO. 671-72303Mfr. No. 72303

• Ultima™ 1250GPH we include threaded1-1/4" & 1-1/8" discharge port

• All versions include a removable check valve• Simple 3 wire design for easy installation• Wire Size: 30" 16 GA• Motor Shaft: 316 Stainless Steel• Ultima™ 1250GPH we include threaded

1-1/4" & 1-1/8" discharge port

• 600 - 1000 GPH Models Dimensions: 4.10" H, 3.20" W, 6" L• 1250 GPH Model Dimensions: 4.60" H, 3.20" W, 6" L


687For more information see: www.johnson-pump.com

LIFT TAB TWIST PULL OUT

Johnson’s cartridge bilge pumps with it’s original interchangeable motor cartridge design allows for easy cleaning and service.Fully submersible and ignition protected.Includes:One each of straight and 90˚ non cracking “Dura Ports”, and a removable check valve is standard. 3 year warranty.

PRO-LINE BILGE PUMPSMore Powerful Output • Lower Power InputThe classic ProLine series Bilge Pump has remained a favorite due to it’s durability and dependability and mounting optionsThese pumps are available in capacities from 500, 750 and 1000 GPH. These tough bilge pumps provide reliability when you need it.General Features• Fully submersible• Ignition protected• 12 Volt• Anti-Airlock protection• Saltwater tough• 100% factory tested• Meets and exceeds NMMA, ABYC, ISO 8846, CEand USCG specifications• 3 year warranty• Dimensions: 5"L x 3"W x 4-3/8"H

ORDER NO. Mfr. No. Description Capacity 3ft. (0.9m)Head (13.6V)

Capacity Straight(13.6V) Amps Fuse

SizeHoseSize

Repl.Cartridge

847-32503 32503 500 GPH 33 L/min - 525 GPH 40 L/min - 630 GPH 2.5 A 5 A 3/4" 847-28552847-32703 32703 750 GPH 44 L/min - 700 GPH 50 L/min - 800 GPH 3 A 5 A 3/4" 847-28572847-32903 32903 1000 GPH 50 L/min - 800 GPH 63 L/min - 1000 GPH 3.2 A 5 A 3/4" 847-28512847-42123* 42123 1250 GPH 60 L/min - 952 GPH 73 L/min - 1150 GPH 3 A 5 A 1-1/8" 847-42522

ORDER NO. Mfr. No. Description Capacity 3ft. (0.9m)Head (13.6V)

Capacity Straight(13.6V) Amps Fuse

SizeHoseSize

847-22502 22502 500 GPH Proline Bilge 33 L/min - 525 GPH 40 L/min - 630 GPH 2.5 A 5 A 3/4"847-22702 22702 750 GPH Proline Bilge 44 L/min - 700 GPH 50 L/min - 800 GPH 3 A 5 A 3/4"847-22102* 22102 1000 GPH Proline Bilge 60 L/min - 952 GPH 73 L/min - 1150 GPH 3 A 5 A 3/4"

General Pump Features• Fully submersible• Ignition protected• 12 Volt• Compression lip seals• Dura-Port discharge port 3/4" discharge only• 100% factory tested

• Anti-Airlock protection• Meets and exceeds NMMA, ABYC, ISO 8849,

CE and USCG specifications• Three year warranty• Dimensions: 2-3/4"L x 2-3/4"W x 4-1/2"H• 316 stainless motor shaft and hardware

THE ORIGINAL INTERCHANGEABLE CARTRIDGE PUMP

JOHNSON PUMP MOTOR CARTRIDGE REPLACEMENTSJohnson Pump’s motor cartridges are easy to install and service. Just lift tab on thehousing, twist motor cartridge and pull out to clean debris from the impeller. Upgradingthe capacity of your bilge or aerator pump is simple with this convenient motor cartridge.

Features:• Fully submersible• Ignition protected• 12 volt• Saltwater tough• 100% factory tested• Meets and exceeds NMMA, ABYC,

ISO 8846, CE and USCG specifications• 3 year warranty

* Does not include Dura-Port connection

* Does not include Dura-Port connection

ORDER NO. Mfr. No. GPH Bilge Pump Model Aerator Pump Model847-28552 28552 500 847-32503, 671-75030 847-28503, 847-38503847-28572 28572 750 847-32703, 671-77030 847-28703, 847-38703847-28512 28512 1000 847-32903, 671-79030 N/A847-42522 42522 1250 847-42123, 671-82030 N/A


ORDER NO. Mfr. No. Description Capacity 3 ft.(0.9m) Capacity Straight Amps Fuse ConnectionHead (13.6V) (13.6V) Size

671-33703 33703 750 GPH Low Boy, 12 Volt 44 I/min - 700 GPH 50 I/min - 800 GPH 3A 5A 3/4"

688

BILGE PUMPS


Low profile pump design for ease of mounting and removal in tight bilge areas. Perfect for vessels withbilge pumps mounted beneath inboard or I/O engines. Removable cartridge style. For 750 GPH Low Boypumps we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps will be delivered including both a straight and a 90˚ smooth elbow.Use 847-36152 magnetic switch only.

Max Length: 5.75"Width: 3.2"Height: 2.82"Wire Size: 16 GA

ORDER NO. Mfr. No. Description Capacity 1.0m-3.35ft.Head (13.6V)

CapacityStraight (13.6V)

671-16004 16004-00 L1600 12V 98L/ min - 1550 GPH 100L/ min - 1600 GPH 7 A 10 A 1-1/8" & 1-1/4"

847-22004 22004 L2200 12V 120L/ min - 1900 GPH 7.5 A 12 A 1-1/8" & 1-1/4"

671-40040 40004 L4000 12V 164L/ min - 2600 GPH 252L/ min - 4000 GPH 15 A 25 A 1-1/2" & 2"

Shaft:Wire size:Max Dia:Max height:

The best choice when you are looking for a high perfomance, heavy duty bilge pump that is designed to meet andexceed the tough demands of commercial and recreational duty. The pump has a liquid-cooled, 12-pole motor withdouble ball bearings for extended service life. The L2200 motor is sealed off by a mechanical seal design thateliminates shaft wear and allows for service and replacement, while the L1600 model has lipseal. The impeller iscarefully designed and tested to maximize head and flow. The L4000 high capacity, heavy duty bilge pump has beendeveloped by Johnson Pump as the premier pump in our submersible bilge pump range. Features a robust motordesign, mechanical shaft seal, high impact ABS plastic and unique threaded port design. Universal base plate andchoice of 1-1/2" or 2" ports makes for a simple installation. These pumps all include a removable check valve.

L4000SS234314GA4.8"8.5"

L1600SS234316GA4.25"5.86"

L2200SS234316GA4.25"7"

HIGH CAPACITY BILGE PUMPS 12V

LOW BOY BILGE PUMP

130L/ min - 2060 GPH

Fuse Size Hose SizeAmperage

689

PUMPS & PUMP ACCESSORIES

103-38850


BILGE PUMP INSTALLATION KITFOR ¾” IDComplete kit to install manual bilge pump with ¾” ID hose outlet.

Includes:• One 2-way On/Off switch with bezel plate• One ¾” ID x 5’ corrugated hose• One thru-hull fitting for ¾” ID hose• Two Snap-It hose clamps• One two-conductor 16 gauge wire, 20’ long• One in-line fuse holder with 2-amp fuse

Caution: Bilge pump switches are not external ignition protected.

ORDER NO. Mfr. No. Description104-41160 4116-5 Complete Kit

WATERBUSTER® PORTABLE PUMPThis patented, submersible pump is a great way to remove unwanted water from boats, pool covers, aquariums andsump pits. Convenient and safe because it needs no electrical cord – runs up to 5 hours on three alkaline “D” batteries.Excellent for use as a portable pump-out device for paddle boats, inflatables, duck boats, dinghies and kayaks.Any craft that lacks a hard-wire, permanent electrical system.• Pumps up to 200 gallons per hour• Includes 42” hose with garden hose adapter for adding longer hose• Lifts water to height of 40"• 6-3/8” High x 5-1/4” Diameter

Note: Not to be used as a permanent bilge pump.ORDER NO. 104-41400Mfr. No. 4140-4

MESH STRAINER/DRAIN FILTERDurable strainers to prevent debris from clogging baitwell drains and aerator pumps.Two types of construction: formed stainless steel wire mesh molded into black PVC plasticbase; or acetal plastic.Caution: Aerator pump must be secured with aerator attachment nut prior to installing strainer.

ORDER NO. Mfr. No. Applications Thread104-42320 4232-7 Fits ¾" aerator inlet & 103-38860 thru-hull ¾" - 14 NPSM103-38850 3885-3 Same as above - plastic ¾" - 14 NPSM

BILGE PUMP SWITCHPanel-mounted rocker switches for use with pump that draws 10-amps or less.¼” spade terminals. 6 Volt through 32 Volt DC only, 10-amps maximum.Plate is 2-13/16” X 1-7/8”, Hole size is 1-1/2” x 7/8”.Caution: Bilge pump switches are not external ignition protected.

ORDER NO. Mfr. No. Description107-76150 7615-3 2-way On/Off Switch

SNAP-IT HOSE CLAMPSUse on bilge pumps and shower sump systems. Install by squeezing tabs together.Can be re-used by sliding the locking grooves apart. Corrosion-resistant plastic.Note: Clamps are intended for water and waste system hoses only.

ORDER NO. Mfr. No. Description109-91850 9185J1 For 7/8" to 1” OD hose109-91851 9185M1 For 1-3/16” to 1-7/16" OD hose

104-42320 Strainer

690

DIAPHRAGM BILGE PUMP

PAR diaphragm pumps provide dependable service and top performance.Self-priming so they can be remotely mounted in a high and dry location.Unique run-dry diaphragm design.Belt drive and rubber mounting pads reduce noise and vibration.Long life permanently lubricated ball bearings.Corrosive resistant base assembly.Inlet and outlet ports for 3/4" ID hoseexcept 34600 which has 1" ports.

For Service Parts, See Page 692


New generation, continuous rated bilge pump with waterproof coating for harsh environments.• 258 gph (978 lph) open flow output• Self-priming up to 10ft (3m) allows mounting above wet bilges.• Diaphragm design allows extended dry running.• Build-in thermal overload protection.• Complete with Pumpgard™ strainer.• Complies with USCG 183.410 and ISO 8846 MARINE (Ignition protection).• ISO 8849 MARINE (Bilge Pump Standard).

Fitting: Connections for 3/4" (19mm) ID hose.Size: 7-1/4" long x 4-1/8 " wide x 4-1/10" high (18cm x 10.5cm x 10cm).

36600-0000

MEDIUM & HEAVY DUTY PUMPS

34600-0000

36680-2000

PAR-MAX 4MODEL NO. 31705

FLOW Dimensions-in (mm)ORDER NO. VOLTS SIZE GPM (LPM) HEIGHT WIDTH LENGTH36960-2000 12 Vdc 6/6-1/4 4 (15,1) 7-1/4 (185) 4-1/16 (103) 7-5/8 (190)

AMPS/FUSE

AMP/FUSE FLOW Dimensions - in (mm)

ORDER NO. VOLTS SIZE GPM (LPM) HEIGHT WIDTH LENGTH36680-2000 12 Vdc 7/10 5.5 (20,8) 8-1/2 (216) 6-1/2" (165) 7-5/8 (194)36600-0000 12 Vdc 11/15 8.0 (30,3) 8-1/4 (210) 5-7/8 (150) 5-7/8 (150)34600-000012 Vdc 9/10 10.8 (40,9) 10-1/2 (267) 8-5/8 (220) 9-3/16 (234)

36960-2000

LIGHT DUTY PUMPSPAR Light Duty pumps are inexpensive yet have performanceand features of higher priced pumps. Self-priming allowspump to be mounted above bilge and sump areas with onlythe intake hose in the bilge. Run-dry design.Tough plastic body has ports for 3/4" ID hose.

For Service Parts, See Page 693

IncludedORDER NO. Description31705-0092 12 Volt DC, fuse 10 amp.31705-0094 24 Volt DC, fuse 7 amp.18912-3050 Diaphragm kit

All DC voltage pumps shown above meet applicable ignition protection sections of the U.S. Coast GuardElectrical Regulations (Title 33, Chapter 1, Part 183, Subpart 1).

46200-0000Supplied with 36680 and 36600 series

pumps. Std. Carton 4 units.

46200-0000Supplied with 36960 series pumps.

691

BILGE ACCESSORIES

For more information see: www.sea-dog.com


BILGE PUMPGARD™ STRAINER• Strainer protects all electric diaphragm bilge pumps.• Prevents unnecessary pump breakdowns caused byparticles in the water.• Transparent housing allows instant inspection.• 46200-0000 model installs in-line between bilge pick up and pump.• Quick in-place cleaning of the 20 mesh stainless steel screen.Fitting: Connections for 3/4" (19mm) ID hose.Size: 4-3/4" long x 2-3/4" wide x 2-1/2" high (12cm x 7cm x 6cm).

ORDER NO. 46200-0000Model for 3/4" (19mm) ID hose.ORDER NO. 46200-00103/4" (19mm) ID hose x Plug-in 90°

IN-LINE STRAINERInjection Molded Polypropylene Body/Polycarbonate Lens with Stainless Steel Filter Screen.Removable clear lens for ease of cleaning and changing filter. Filter is interchangable with ParJabsco®. Filter should be mounted above water level line and on suction side of pump.

HYDRO AIR SWITCHUltra reliable bilge switch, which will automaticallyoperate bilge pumps once water level reaches 2-1/4"(55mm). As water rises in the bilge, air pressure inthe bell and tube increases, operating a diaphragmswitch in the switch unit.All electrical components are clear of the water andno sensitive electronics are used.• Proven highly reliable design using new mouldingtechniques.• Styling compliments modern interiors.• Automatic operation of bilge pumps or audible andvisual high water level alarms.• Turns on at 2-1/4" (55mm), off at 1" (25mm).• Diaphragm switch can be mounted up to 10ft (3m)above plastic airbell.

Size: Switch - 6" long x 1-3/4" high x 3" wide(15.3cm x 4.5cm x 7.5cm)Airbell - 2-3/8" long x 1-1/4" wide x 4" high(6cm x 3cm x 10cm)

ORDER NO. 59400-0012Hydro Air Switch for 12 Volt DC, up to 20 amps.ORDER NO. 59400-0024Hydro Air Switch for 24 Volt DC, up to 10 amps.

ORDER NO.423-64135423-64137

Mfr. No.364135364137

A3-9/16”3-9/16”

Screen Size50 Mesh1/16” Mesh

B4-1/16”4-1/16”

D1/2” Hose3/4” Hose

C2-9/16”2-9/16”

Fastener#10 RH#10 RH

REPLACEMENT PARTS ONLY“OLD STYLE” PUMPGARD IN-LINE STRAINERS - (Screw on top of Bowl)

For In-Line Bilge For Water SystemsORDER NO. ORDER NO.

Replacement Screen 36139-0000 36138-0000O-Ring 36403-0000 36403-0000Clear Bowl Not Available Not Available

NOTE: Older Style PUMPGARD STRAINERS are now replaced by thenewer version with the bowl threaded to the base.

692

BILGE PUMP REPLACEMENT PARTS


Part Description Key Part Number Qty. Part Number Qty. Part Number Qty.Motor Kit 12 Vdc 1 30200-0000 1 30200-0000 1 30200-0000 1Motor Kit 24 Vdc 30200-0010 30200-0010 30200-0010

Small Pulley 3 37169-0000 1 37169-0000 1 37169-0000 1Large Pulley (with key way) 4 37170-0001 1 37171-0001 1 37170-0001 1Belt 5 30021-0000 * 1 30022-0000 * 1 30021-0000* 1Jack Shaft Assembly 6 35037-0001 1 35691-0001 1 35506-0001 1Connecting Rod Assembly 7 37172-0001 1 37173-0001 1 37173-0001 1Diaphragm Plate 8 Top 34640-0000 1 35212-0000 2 35503-0000 2

1Diaphragm 9 30012-0000 * 1 30016-0000 * 1 30015-0000* 1Retainer 10 Top 34633-0000 1 35173-0000 1 35497-0000 1

Bottom 34634-0000 1Valve Set (Inlet & Outlet) 11 30002-0000 * † 1 set 30003-0000 * † 1 set 30004-0000* † 1 setBase Assembly (See †) 12 34623-0000 1 35630-1100 † 1 35625-1100 † 1

35625-1200 - for 36850 Series

Pressure Switch 13A 37121-0010 137121-0000 1 See note 2

Ports (Inlet & Outlet) 13 37175-0000 † 1 37176-0000 † 1Small Pulsation Dampener 14 37177-0000 * † 1 37177-0000* † 1Pulsation Dampener 15 37178-0000 * † 1 37178-0000* † 1

Small Bottom Plate 17 35623-0000 † 1 35623-0000

Gaskets 19 37181-0000 * † 1 setVibration Pad Kit 20 37180-0000 1 set 37180-0000 † 1 set 37180-0000Hardware Kit 21 37164-0001 1 set 37165-0000 1 set 37165-0001 1 setService Kit (See*) 30101-0000 * 30124-0000 * 30122-0000 *

• Indicates items included inHardware Kit (Key 21)



Choose from a line of qualitywater systems designed to

meet your needs.

34600-Series(Was 6600J)



* Indicates Parts Contained in Service Kit.† Indicates Parts Supplied with Base Assembly.

† Jack Shaft Assembly includes new styleconnecting rod (37173-0001) with5/16" diameter hole and two lock nuts.Previous pump models use a connecting rod(37173-0000) with a 1/4" diameter hole and bolt.

Note 2: includes switch and conversion kit to mount new type switch onto older style-J and - 0000 pumps.

693

BILGE PUMP REPLACEMENT PARTS

• Indicates items included inHardware Kit (Key 21).

PAR Pumpgard In-LineBilge Pump Strainer46200-0000 3/4" Hose Barb46200-0002 1/2" Hose Barb


meet your needs.


37202-Series(Was 7202)

* Indicates Parts Contained in Service Kit.† Indicates Parts Supplied with Base Assy.

NOTE 1- For Model 37205-0000 usereplacement motor number30202-0000 (12 Volt Only).

NOTE 2- For Model 37201-0000 use 2 each35983-0000 diaphragm plates.

SeriesPart Description Key Part Number Qty. (1000) (2000) Part Number Qty.

Motor Kit 12 Vdc 1 30202-0000 1 X X 30201-0000 - See Note 1 1Motor Kit 24 Vdc 30201-0010 30200-0040Motor Mount 2 35797-0000 1Connecting Rod Assembly 7 30040-0000* 1 X X 30040-0000 * 1

Diaphragm 9 30015-0000* 1 X X 37174-0000 * 1Retainer 10 35788-0000 - Retainer 1

35816-0000 - Retainer Plate 1Valve Set (Inlet & Outlet) 11 30003-0000* †1 set X X 30005-0000 * 1 setBase Assembly (See †) 12 44114-1000 † 1 X X 35795-0000 † 1Ports (Inlet & Outlet) 13 37175-0000 † 1 X XPulsation Dampener 15 37178-0000 † 1 X 37179-0000 * 1

44127-1000 † 1 XVibration Pad Kit 20 37180-0000 †1 set X

44990-0058* †1 set XHardware Kit 21 37166-0000 1 set X 37168-0000 1 set

43990-0060 1 set XService Kit (See *) 30120-0000* X 37182-0000 *

43990-0063* X

• Indicates items included inHardware Kit (Key 21).


694

WATER PRESSURE PUMPS


PAR-MAX™ 1

Miniature multi-outlet water pressure pump serves 1 or 2-3/8" (10mm)outlets at any one time.

Models include both automatic and manual pumps.• 1.1 gpm (4.3 lpm) open flow output.• Self-priming up to 4ft (1.2m).• Dual diaphragm operation.• Thermal overload protection automatically stops motor should itoverheat due to overload, with auto re-start feature.

• Diaphragm design allows dry running.• Pressure switch cut-in 22 psi (1.5 bar), cut-out 35 psi (2.4 bar).• Complies with USCG 183.410 and ISO 8846 MARINE(Ignition Protection).

Fitting: Connections for 3/8" (10mm) ID hoseand slip-on 1/2" (13mm) bushings.

Size: 6.4" long x 3.5" wide x 2.3" high (16cm x 9cm x 6cm).

ORDER NO.42630-290042632-000042634-0000

Description12 Volt DC model, fuse 4 amp, automaticPump head repair kitPressure switch kit

@Have a Technical Question?

Contact our Technical Support Staffemail: [email protected]

[email protected]

695



PAR-MAX™ THREE CHAMBER WATER PRESSURE PUMPSJabsco PAR-MaxTM Water Pressure pumps have provided years of great service to many boaters. Now Jabsco has refined the product line withtwo new pumps. The 1.9 GPM and 2.9 GPM are designed for vessels requiring a quiet, smooth flow, from .65 GPM to 2.9 GPM and come with abuilt-in pulsation dampening by-pass to control unwanted cycling and noise. These performance characteristics match the needs of the typicalvessel with a shower, water heater and up to three faucets. We include quick connect fittings for ease of pump installation.

The new PAR-Max 1.9 and 2.9 will deliver pressurized water to the galley, lavatory, shower and toilet.These new units deliver 1.9 and 2.9 GPM respectively and with the built-in “pulsation Eliminator” a smooth flowbetween a .65 GPM (2.5 LPM) and 2.9 GPM (11 LPM) can be expected. No need for an accumulator tank!

Features:• Snap-fit ports• Three chamber design• Distinctive style• Corrosion resistant• Soft rubber mounts• Dry running capability• Meets ISO 8846 design• Self-priming up to 10 feet

Dimensions :31295 4.5” / 110 mm High

4.5” / 110 mm Wide9” / 229 mm Long

31395 4.5” / 110 mm High4.5” / 110 mm Wide9” / 229 mm Long

ULTRA MAX WATER PRESSURE SETA fully assembled pressure set that simplifies the installation of waterpressure systems for both the professional and amateur installer.The set consists of a PAR-Max pump, strainer and pre-pressurizedaccumulator tank with quick connect electrical connections on arubber mounted board.Serves 3 or more 1/2" (13mm) outlets.• Flow of 3.5 gpm (13.2 lpm).• Self-priming up to 10ft (3m).• Can be installed vertically or horizontally.• Quadruple Diaphragms for smooth and quiet operation.• Thermal overload protection automatically stops motor shouldit overheat due to overload, with auto re-start feature.• Diaphragm design allows extended dry running.• Pressure switch cut-in 20 psi (1.4 bar), cut-out 40 psi (2.8 bar)(59451-1012/1024).• Maintenance free potable water quality accumulator tank.• Complies with USCG 183.410and ISO 8846 MARINE (Ignition Protection).

Specifications :Model ORDER NO. / 12V ORDER NO. / 24V PSI GPMParMax 1.9 31295-0092 **31295-0094 25 1.9ParMax 2.9 31395-0092 **31395-0094 50 2.9NOTE:**Denotes Special Order Only

Fitting: Connections for 1/2" (13mm) ID hose or 1/2" (15mm) Qest fittings.Size: 15-1/2" long x 15-3/4" wide x 5-1/2" high (39cm x 40cm x 14cm).ORDER NO. Description59451-1012 12 Volt DC model, fuse 10 amp, high pressure version59451-1024 24 Volt DC model, fuse 6 amp, high pressure version

ParMax 1.9

ParMax 2.9

696



New generation multi outlet water pressure pump serves 4 or more 1/2" (13mm) outletsat any one time. Snap-fit ports simplify both installation and removal for routine service.• 4.3 gpm (16.3 lpm) open flow output.• Self-priming up to 10ft (3m).• Four piston diaphragm sealed for smooth and quiet operation.• Thermal overload protection automatically stops motor should it overheat due tooverload, with auto re-start feature.• Diaphragm design allows extended dry running.• Pressure switch cut-in 15 psi (1.0 bar), cut-out 25 psi (1.7 bar), low pressure, orcut-in 20 psi (1.4 bar) cut-out 40 psi (2.8 bar), high pressure.• Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection).

Fitting: Connections for 1/2" (13mm) ID hose or 1/2" Qest threads.Size: 9.8" long x 4.2" wide x 4.1" high (25cm x 10.6cm x 10cm).Weight: 6.5 lb (2.8kg).

New generation multi outlet water pressure pump serves up to 3 1/2" (13mm) outlets at any one time.Snap-fit ports simplify both installation and removal for routine service.• 3.5 gpm (13.2 lpm) open flow output.• Self-priming up to 10ft (3m).• Three chamber positive displacement diaphragm design.• Thermal overload protection automatically stops motor should it overheat due to overload, with auto re-start feature.• Diaphragm design allows extended dry running.• Pressure switch cut-in 15 psi (1.0 bar), cut-out 25 psi (1.7 bar), low pressure, or cut-in 20 psi (1.4 bar) cut-out 40 psi (2.8 bar), high pressure.• Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection).

Fitting: Connections for 1/2" (13mm) ID hose or 1/2" Qest threads.Size: 8.6" long x 4.2" wide x 4.1" high (22cm x 10.6cm x 10cm).Weight: 4.5 lb (2.1 kg).

PAR-MAX 4 WATER SYSTEM PUMP

Service up to seven outlets with smooth flow and hassle-free operationThe high pressure capability of the new Par-Max Series 7.0 GPM water pressure pump providesexceptional flow and consistent water pressure to easily handle the demand of multiple outlets atone time. When onboard appliances are activated, the built in bypass design re-circulates backpressure into the pump to reduce cycling resulting in quieter and smoother flow.The Par-Max 7.0 GPM Water Pressure Pump includes a Pumpgard™ strainer, soft rubber mountsand quick connect fittings for ease of installation. The pump is self priming up to 10ft. (3m) andcan run dry without damage. It’s manufactured from corrosion resistant materials and is capableof pumping water up to 70˚C (160˚F). Available in either 12 or 24 volt DC versions, the Par-Max7.0 GPM Water Pressure Pump is certified to EN ISO 8846 Marine (Ignition Protection)• 7.0 GPM (26.5 LPM) Open Flow Rate• Up to 60 PSI (4.1 bar)• Self-Priming / Runs Dry• Silent Operation• Low Amp Draw

Fitting: Connections for 1/2" (13mm) ID hose or 1/2" Qest threads.Size: 9.8" long x 4.2" wide x 4.1" high (25cm x 10.6cm x 10cm).Weight: 6.5 lb (2.8kg).

PAR-MAX 7 GPM WATER SYSTEM PUMP

PAR-MAX 3.5 WATER SYSTEM PUMP

ORDER NO. Description52600-0092 ParMax 7, Water Pressure Pump, 12 Volt DC52600-0094 ParMax 7, Water Pressure Pump, 24 Volt DC

ORDER NO. Description31620-0094 24 Volt DC model, fuse 7 amp, high pressure31620-0292 12 Volt DC model, fuse 10 amp, low pressure31620-0294 24 Volt DC model, fuse 7 amp, low pressure18912-3040 Diaphragm kit

ORDER NO. Description32600-0092 12 Volt DCc model, fuse 10 amp

2013 Pages 696_697_NewCatalogue 2011 13-02-28 12:07 PM Page 2

697



ORDER NO. Mfr. No. Nominal Max Open Flow Operating Cut-OutDC Volts Fuse GPM (LPM) Pressure PSI (Bar) Pressure PSI (Bar)

42755-0092 42755-0092 12 VDC 15A 5.0 (19) 40 (2.75) 60 (4.1)

ORDER NO. Mfr. No. Volts GPM Switch PSI Fittings(LPM) (Bar)

82500-0092 82500-0092 12 VDC 5.0 (18.9) 60 (4.3) (2) 1/2" Male Thread (2) 1/2" Male Thread Elbow82400-0092 82400-0092 12 VDC 4.0 (15.1) 60 (4.3) (2) 1/2" Male Thread (2) 1/2" Male Thread Elbow

The DiMOND technology automatically runs diagnostics to detect common failures such as rundry, pump leaks, over current, under current, low voltage and over voltage. if the diagnosticdiscovers a problem, the pump will stop, identify the root cause, and provide the data you needto solve the problem.

V-FLO is powered by a new variable speed drive that delivers the exact amount of water flowneeded to perform a variety of onboard delivery tasks. Since the pump is constantly monitoringwater flow and electrical current, it automatically adjusts itself as needed, ensuring that yoursystems are operating at peak efficiency.

Features and Benefits• 5.0 gallons per minutes (19 liters)• DiMOND technology provides consistent water pressure• Up to 50% less power consumption • Learns the boat’s water pressure system to improve pump performance• Kit includes 5.0 Water Pressure pump, Pumpgard™ Inline Strainer, Snap-Fit Port Fittings

5.0 GPM WATER PRESSURE PUMPPowered by the revolutionary DiMOND technologyJabsco’s V-FLO variable flow, constant pressure water pumps now feature the revolutionary new DiMOND technologydesigned to automatically diagnose and monitor all aspects of your pump’s performance to prevent system failure.DiMOND incorporates 10 specific modules designed to Monitor, Protect and Prevent – allowing you to evaluate andrespond to the problem before the pump or your boat are damaged.

PAR-MAX 5 PLUS

NEXT GENERATION WATER PRESSURE PUMPSService up to five outlets with smooth flow and hassle-free operation

The high pressure capability of the new Jabsco Par-max Plus Series water pressure pumps provides exceptional flow and consistent waterpressure to easily handle the demand of multiple outlets. All Par-Max Plus models include soft rubber mounts and quick connect fittings forease of installation. The patented Par-Max-Plus co-injected molded diaphragm and larger heavier duty motor brushes significantly extendpump life up to 50% longer than existing Jabsco Par-Max Series diaphragm pumps.The Par-Max Plus Series is self-priming up to 10 ft. (3m) and can run dry without damage. It’s manufactured from corrosion resistant materials, capable of handling the harshest marine environments.

Features and Benefits• Sealed switch and co-injected molded diaphragm, eliminates leak paths, extending the life of the pumps by up to 50%• Jabsco’s robust electric diaphragm pump design, proven with over 7 million units in service• Up to 50% less power consumption • Automatic pressure switch, tested over 4 millions cycles without failure• Quick disconnect ports, allow for ease of installation in hard to reach places• Improved noise dampening rubber feet, significantly minimizes vibration when mounted against hard surfaces• Certified to EN ISO 8846 Marine (Ignition Protection)• Dimensions: 10.60" long x 5.09" wide x 4.72" high (27cm x 13cm x 12cm)

PAR-MAXPAR-MAXPAR-MAXPAR-MAX TM

plusplusplusplus


698



36900-Series

PAR 36900 & 36800-SERIES

PUMPS WITH AC MOTORS CAN SPARK. EXPLOSION AND DEATH CAN OCCUR.DO NOT USE WHERE FLAMMABLE VAPORS ARE PRESENT.

All DC voltage pumps shown above meet applicable ignition protection sections of the U.S. Coast GuardElectrical Regulations (Title 33, Chapter 1, Part 183, Subpart 1).

Two well established and service-proven pumps for larger boats.Both designed specifically to supply a reliable, smooth and steady flow ofwater for up to four fixtures.

Features include: Run dry capability; belt drive and flexible mounts for low noise;built-in check valve protection against city water pressure (automatic switchmaintains 39 psi. pressure); pulsation dampeners to absorb water hammer;battery conserving low amperage motors; and ports sized to take 1/2"-5/8" IDhose.

Can be used in salt water systems for galley rinse water and deck andanchor washdown.

PAR 36950-SERIES

A popular pump for boats with two or three fixtures.A dependable, low maintenance pump able to run dry extended periods.Smooth belt drive and flexible mounts aid noise reduction. Pump protectedagainst city water pressure by built-in check valve. Pulsation dampenersabsorb water hammer and give smooth flow to fixtures. Low amperagemotors conserve battery power.Ports fit 1/2" - 5/8" hose.

This pump can be used in salt water systems for deck and anchorwashdown, and galley rinse water.

OPEN FLOW AMPS/ DIMENSIONS-in (mm)ORDER NO. GPM LPM VOLTS FUSE SIZE HEIGHT WIDTH LENGTH36950-2000 3.0 11.4 12 Vdc 6/8 8-1/2 (216) 6-1/2 (220) 7-1/2 (191)36950-2010 3.0 11.4 24 Vdc 3/4 8-1/2 (216) 6-1/2 (220) 7-1/2 (191)

36800-Series

36950-Series

OPEN FLOW AMPS/ DIMENSIONS-in (mm)ORDER NO. GPM LPM VOLTS FUSE SIZE HEIGHT WIDTH LENGTH36900-1000 4.2 16 12 Vdc 7.5/10 10-1/8(260) 6-1/2 (165) 9-7/8 (251)36900-1010 4.2 16 24 Vdc 3.8/5 10-1/8(260) 6-1/2 (165) 9-7/8 (251)36800-1000 3.3 12.5 12 Vdc 6/8 8-3/8(213) 6-1/2 (165) 9-7/8 (251)

699

WASHDOWN PUMPS


Circuit Breaker includedwith PAR MAX 7 models.

(See chart)

Hose Coil includedsome models.(See chart)

82905-0092&

82906-0092

82505-0092&

82605-0092

THE PAR MAX FAMILY OF HIGH PERFORMANCE WASHDOWN PUMPSFROM THREE TO SEVEN GALLONS PER MINUTEFor many years, Jabsco PAR MAX washdown pumps have been the preferred system for cleaning marine vessels, making it an industrystandard. That’s because all Jabsco products are specifically designed to fit the expressed needs of boat builders and enthusiasts alike.FEATURES:• High Pressure jet blasts mud and silt from anchor chain and decks• Waterproof, sealed motors• Dry running capability• Thermal overload protection automatically stops the motor if it overheats• PAR MAX Washdown standard models include:(1) Pumpgard™ Intake Strainer, (4) Quick Connect Port Fittings,(1) Trigger Pressure Nozzle

HIGH PRESSURE 6.0 GPH WASHDOWN PUMPSThe new HotShot Series robust five chamber, patented co-injected moulded diaphragm and larger heavier duty motor brushes significantlyextends pump life up to 50% longer than existing Jabsco Par-MAX Series Diaphragm pumps. While other manufacturers claim extremeperformance, Jabsco’s Hotshot Series proves it with its unmatched 6.0 GPH (22.7 lpm) model.FEATURES:• Sealed switch and co-injected moulded diaphragm, eliminates leak paths, extending the life of the pumps by up to 50%• Ergonomically designed spray nozzle provides powerful and accurate fire power with every shot.• Quick disconnect ports allow for adjustable and ease of installation• PumpGard™ strainer, prevents over 99% of the finest partcles from clogging the pump• Kits include spray nozzle, fitting, pumpGard™ strainer and hose• Improved noise dampening rubber feet, significantly minimizes vibration when mounted against hard surfaces• Self-priming up to 10 feet

ORDER NO. Pressure psi Flow Rate Volts Type

82505-0092 70 psi (4.8 bar) 5 GPM (18.9 lpm) 12 Volt DC Pump only

82905-0092 70 psi (4.8 bar) 5 GPM (18.9 lpm) 12 Volt DC Washdown Kit

82605-0092 70 psi (4.8 bar) 6 GPM (22.7 lpm) 12 Volt DC Pump only

82906-0092 70 psi (4.8 bar) 6 GPM (22.7 lpm) 12 Volt DC Washdown Kit

Model No. PAR MAX 7 PAR MAX 7 PAR MAX 4 PAR MAX 4 PAR MAX 3ORDER No. 52700-0092 52900-0092 32605-0092 32900-0092 32901-0092

GPM / LPM 7 (26.5) 7 (26.5) 4 (15.1) 4(15.1) 3 (11.4)Volts 12 12 12 12 12Pressure/Bar 80 (5.5) 80 (5.5) 60 (4.1) 60 (4.1) 50 (3.5)Strainer Yes Yes Yes Yes YesNozzle Yes Yes Yes Yes YesPort Hose Size 1/2" or 3/4" 1/2" or 3/4" 3/4" 3/4" 1/2" or 3/4"25 ft. Coiled Hose No Yes No Yes YesBreaker Yes Yes

WASHDOWN SPRAY NOZZLECombined with the PAR-MAX washdown pump, this disconnect nozzle has a multi-setting flow controlfor fine mist spray through to a power-cleaning blast output. Works well with both fresh and salt water.The quick-disconnect nozzle can be removed from the hose and used at another outlet, withoutturning off the pump. Also performs well with other pumps.

ORDER NO. Description30703-1000 Quick-disconect nozzle attaches to 3/4" GHT snap-in connector30704-1000 Quick-disconect nozzle attaches permanently to 1/2" hose

700

WATER SYSTEM PUMP REPLACEMENT PARTS


REPLACEMENT PARTS PAR-MAX

PART NUMBERSKEY DESCRIPTION QTY 30600-SERIES 30620-SERIES 30710-SERIES 30720-SERIES2 Pressure Switch 1 37121-0010 37121-0010 37121-0010 N/A

Low Pressure Switch** 1 44814-1000 44814-1000 N/A N/A3 Body Kit 1 30608-1000 30608-1000 30608-1000 30608-1000

6 Plate/Piston Kit 1 30682-1000 30682-1000 30682-1000 30682-1000

7 Motor Kit 12 Vdc EMC 1 18753-0575 18753-0577 18753-0572 18753-0577Motor Kit 12 Vdc 1 18753-0463 N/A 18753-0463

Motor Kit 24 Vdc EMC 1 18753-0576 18753-0578 18753-0573 18753-0578Motor Kit 24 Vdc 1 18753-0451 18753-0464 N/A 18753-0464

Standard Port Kits:1/2" Barb 2 30654-1000 30654-1000 N/A N/A1/2" Threaded (QEST) 2 30649-1000 30649-1000 N/A N/A3/4" Barb 2 30653-1000 30653-1000Pumpgard™ Strainer 1 46400-0002 46200-0000 46400-0002 46400-0002Spray Nozzle 1 N/A N/A 30703-1000 N/A

BILGE/WASHDOWN PUMPS

PAR-MAX SERIES"OLD VERSION" 30XXX SERIES"DISCONTINUED MODELS"

Optional Port Kit Adapters available (2 per Kit)

**Low Pressure Switch used on -0212 and -0224 models.NOTE: Model 30621-Series use 30620-Series components. Model 30630-0012 use 30620-Series 12V components except use 18753-0489 12V motor.

*NOTE: Pump head rotates 180˚

* Some models only

PART NUMBERSKEY DESCRIPTION QTY 30621-SERIES 30631* 30700-00X2 & 30700-03X2 30705

30700-00X4 30700-03X42 Pressure Switch 1 37121-0010 N/A 44050-1000 44050-1000 N/A

Low Pressure Switch 1 44814-1000 N/A N/A N/A N/A3 Body Kit 1 30608-1000 30608-1000 30608-1000 30608-1000 30608-1001

6 Plate/Piston Kit 1 30682-1000 30682-1000 30682-1000 30682-1000 30682-1000

7 Motor Kit 12 Vdc EMC 1 18753-0577 18753-0579 18753-0579 18753-0579 18753-0579Motor Kit 12 Vdc 1 18753-0463 18753-0489 18753-0489 18753-0489 18753-0489

Motor Kit 24 Vdc EMC 1 18753-0578 18753-0595 18753-0595 18753-0595 18753-0595Motor Kit 24 Vdc 1 18753-0464 18753-0490 18753-0490 18753-0490 18753-0490

1/2" Barb 2 30654-1000 N/A 30654-1000 N/A1/2" Threaded (QEST) 2 30649-1000 N/A N/A N/A3/4" Barb 2 30653-1000 30653-1000 30653-1000 30653-1000Pumpgard™ Strainer 1 36400-0000 46200-0000 46400-0000 46400-0002 46200-0000Spray Nozzle 1 N/A 30703-1000 30704-1000 N/A

701



KEY DESCRIPTION QTY 31605-SERIES 31610-SERIES 31631-SERIES 31705-SERIES 31700-SERIES1 Upper Housing 1 18910-4050 18910-4000 18910-4000 18910-4000 18910-40502 Valve Kit 1 18911-7030 18911-7010 18911-7010 18911-7010 18911-70303 Diaphragm Kit 1 18912-3040 18912-3050 18912-3050 18912-3050 18912-30404 Lower Housing Kit 1 18915-9002 18915-9005 18915-9005 18915-9005 18915-90025 Pressure Switch 1 44050-1000 N/A N/A N/A 44050-10006* Service Kit 1 18920-9043 18920-9053 18920-9053 18920-9053 18920-90437 Motor Kit - 12V EMC COMP 1 18919-0139 18919-0139 18919-0140 18919-0140 18919-0140

Motor Kit - 24V EMC COMP 1 18919-1061 18919-1061 18919-1062 18919-1062 18919-10628 Slide Clips 1 30648-1000 30648-1000 30648-1000 30648-1000 30648-10009 Pumphead Assy. 1 18914-6350 18914-6300 18914-6300† 18914-6300 18914-6350

Pumpgard™ Strainer US 1 46400-0000 46400-0000 46400-0000 46400-0000 46400-0000Pumpgard™ Strainer EC 1 46400-0002 46400-0002 46400-0002 46400-0002 46400-0002Spray Nozzle US 1 30703-1000 30703-1000Spray Nozzle EC 1 30704-1000 30704-1000

KEY DESCRIPTION QTY 31595-SERIES 31600-SERIES 31620-SERIES 31630-SERIES1 Upper Housing XXXXX-0092 1 18910-4040 18910-4040 18910-4040 18910-4040

Upper Housing XXXXX-0094 1 18910-4040 18910-4040 18910-4040 18910-4040Upper Housing XXXXX-0292 1 18910-4025 18910-4025 18910-4025 18910-4025Upper Housing XXXXX-0294 1 18910-4025 18910-4025 18910-4025 18910-4025

2 Valve Kit 1 18911-7030 18911-7030 18911-7030 18911-70303 Diaphragm Kit 1 18912-3040 18912-3040 18912-3040 18912-30404 Lower Housing Kit 1 18915-9000 18915-9002 18915-9002 18915-90025 Pressure Switch XXXXX-0092 1 37121-0010 37121-0010 37121-0010 37121-0010

Pressure Switch XXXXX-0094 1 37121-0010 37121-0010 37121-0010 37121-0010Pressure Switch XXXXX-0292 1 44814-1000 44814-1000 44814-1000 44814-1000Pressure Switch XXXXX-0294 1 44814-1000 44814-1000 44814-1000 44814-1000

6* Service Kit 1 18920-9042 18920-9043 18920-9043 18920-90437 Motor Kit - 12V EMC COMP 1 18919-0134 18919-0131 18919-0132 18919-0133

Motor Kit - 24V EMC COMP 1 18919-1055 18919-1052 18919-1053 N/A8 Slide Clips 1 30648-1000 30648-1000 30648-1000 30648-10009 Pumphead Assy. XXXXX-0092 1 18914-6240 18914-6340 18914-6340 18914-6340

Pumphead Assy. XXXXX-0094 1 18914-6240 18914-6340 18914-6340 18914-6340Pumphead Assy. XXXXX-0292 1 18914-6225 18914-6325 18914-6325 18914-6325Pumphead Assy. XXXXX-0294 1 18914-6225 18914-6325 18914-6325 18914-6325Pumpgard Strainer with Support 1 _ _ _ 36400-9000

Pump Service Parts ListDescription Part No. 42630-2900 42631-2900PumpPump head Repair Kit 42632-0000 X XMotor/Housing Kit 42633-0000 X XPressure Switch Assy. 42634-0000 X

* Service kit includes keys 2,3 and 4B, C, D and 8

PAR-MAX 2+, PAR-MAX 3 & PAR-MAX 4 WATER SYSTEM PUMPS

NEW 31XXX SERIES PAR-MAX RANGE

PAR-MAX 3 & PAR-MAX 4 WASHDOWN/BAITWELL & SHOWER DRAIN/GENERAL PURPOSE

** NOTE: Most replacement parts are avaiable in stock**†NOTE: Pump head rotates 180˚

StrainersPump Series Strainer No Inlet Outlet Screen42630-2900 36400-0003 3/8" Barb 3/8" Barb 40 Mesh42631-2900 36400-0003 3/8" Barb 3/8" Barb 40 Mesh

PAR-MAX 1 AUTOMATIC WATER SYSTEM PUMP & MANUAL DEMAND PUMP

702




meet your needs.

36900 - Series(was 6900J)



* Indicates Parts Contained in Service Kit.† Indicates Parts Supplied with Base Assy.** 1/2" Threaded Outlet Port 37050-00011/2" Threaded Inlet Port 37050-00001/2" Flare Outlet Port 37050-00021/2" Flare Inlet Port 37050-0003

NOTE 1 - For Model 37205-0000 usereplacement motor number30202-0000 (12 Volt Only).

NOTE 2 - Includes Switch and ConversionKit to mount new type switch ontoolder style -J and -0000 pumps.



Series(1000) (2000)

Part Description Key Part Number Qty. Part Number Qty. Part Number Qty.Motor Kit 12 Vdc 1 30200-0000 1 30200-0000 1 30200-0000 1 X XMotor Kit 24 Vdc 30200-0010 30200-0010 30200-0010Small Pulley 3 37169-0000 1 37169-0000 1 37169-0000 1 X XLarge Pulley (with key way) 4 37170-0001 1 37170-0001 1 37171-0001 1 X XBelt 5 30021-0000 * 1 30021-0000 * 1 30022-0000 * 1 X XJack Shaft Assembly 6 35690-0001 1 35506-0001 1 35689-0001 1 X XConnecting Rod Assembly 7 37173-0001 1 37173-0001 1 37173-0001 1 X XDiaphragm Plate 8 35212-0000 2 35503-0000 2 35503-0000 2 X XDiaphragm 9 30016-0000 * 1 30015-0000 * 1 30015-0000 * 1 X XRetainer 10 35173-0000 1 35497-0000 1 35497-0000 1 X XValve Set (Inlet & Outlet) 11 30004-0000 * † 1 set 30004-0000 * † 1 set 30004-0000 * † 1 set X XBase Assembly (See †) 12 35625-1100 † 1 35625-1100 † 1 44114-1000 † 1 X

35625-1200 - for 36850-Series 44114-1100 † 1 X35620-1200 - for 36955-Series

Pressure Switch 13 37121-0010 1 37121-0010 1 37121-0010 1 X X37121-0000 - See Note 2 1 37121-0000 - See Note 2 1 37121-0000 - See Note 2

Ports (Inlet & Outlet) Barb** 15 37176-0000 * † 1 set 37176-0000 * † 1 set 37176-0000 * † 1 set X XSmall Pulsation Dampener 16 37177-0000 * † 1 37177-0000 * † 1Pulsation Dampener 17 37178-0000 * † 1 37178-0000 * † 1 37178-0000 * † 1 X

44127-1000 * † 1 XBottom Plate 19 35623-0000 * † 1 35623-0000Vibration Pad Kit 20 37180-0000 * † 1 set 37180-0000 37180-0000 * † 1 set X

43990-0058 * † 1 set XHardware Kit 21 37165-0000 1 set 37165-0001 1 set 43990-0071 † 1 set XService Kit (See *) 30121-0000 * 30122-0000 * 30126-0000 * X

43990-0061 * X

* Indicates Parts Contained in Service Kit.† Indicates Parts Supplied with Base Assy.** 1/2" Threaded Outlet Port 37050-00011/2" Threaded Inlet Port 37050-00001/2" Flare Outlet Port 37050-00021/2" Flare Inlet Port 37050-0003

NOTE 1 - For Model 37205-0000 usereplacement motor number30202-0000 (12 Volt Only).

NOTE 2 - Includes Switch and ConversionKit to mount new type switch ontoolder style -J and -0000 pumps.


meet your needs.



SeriesPart Description Key Part Number Qty. (1000) (2000) Part Number Qty. Part Description Key Part No. Qty.

Motor Kit 12 Vdc 1 30201-0000 1 X X 30201-0000 - See Note 1 1Motor Kit 24 Vdc 30201-0010 30201-0010Motor Kit 32 Vdc 30202-0020 High Press Switch 2 37121-0010† 1Motor Mount 2 35452-0000 1 X X 35812-0000 1 Low Press Switch 44814-1000 *1Small Pulley 3Large Pulley 4 Body Kit 44010 3 N/ABelt 5 Body Kit 44020 N/AJack Shaft Assembly 6 Valve Kit 4 N/AConnecting Rod Assembly 7 30033-0000* 1 X X 30033-0000* 1

Diaphragm Kit 5 44017-2000 1Diaphragm 9 30015-0000* 1 X X 37174-0000* 1 Plate/Piston Kit 6 N/ARetainer 10 35454-0000 1 X X 35799-0000 1Valve Set (Inlet & Outlet) 11 30004-0000*† 1 set X X 30130-0000* 1 setBase Assembly (See †) 12 44114-1100 † 1 X 35787-1000 1 Motor Kit 12 Vdc 7 N/A

44114-1100 * 1 X 35790-0000 - for 37205-0000 Motor Kit 24 Vdc N/A

Pressure Switch 13 37121-0010 1 X X 37121-0010 137121-0000See Note 2 37121-0000 -See Note 2 1

Ports (Inlet & Outlet) Barb** 15 37176-0000 1 set X XSmall Pulsation Dampener 16Pulsation Dampener 17 37178-0000*† 1 X 37179-0000* 1

44127-1000*† 1 XSmall Bottom Plate 18Vibration Pad Kit 20 37180-0000† 1 set X

43990-0058† 1 set XHardware Kit 21 37167-0000† 1 set X 37167-0000 1 set

Service Kit (See*) 30123-0000 * X 30127-0000* 143990-0064 * X

36970-Series(Was 6970 J)

37205/37215-Series(Was 7205/7215)

44010 and 44020 SERIESPAR MATE PUMP (Discontinued Models)

‡ Model 44010-2000 useshigh pressure switch

* Note: Models 44010 - 2010 & 44010-2011 use low pressure switches.

Model 44020 - Seriesnot fitted with a pressure switch

703



704

WATER SYSTEM PUMPS


ORDER NO. Mfr. No. Volts Open Flow Rate PSI210-31310 D3131V5011A 12 VDC 1.6 GPM 60 psi

ORDER NO. Mfr. No. Volts Amp Draw Fuse Flow GPM@ 10 psi (0.7 bar) Amps (L/Min)

210-06940 D3144H1311A 12 VDC 2.5 7 2.3 (8.7)

ORDER NO. Mfr. No. Description020-09004 2009-004C Motor 12 VDC020-95105 2095-105 Pressure Switch Assembly

The Duplex II series of pumps incorporate the best technology and features developed by FLOJET. Everything from the back flow preventer,check valves, bearings and diaphragm assembly to the motor, have been designed to make this truly the most advanced and reliablediaphragm pump available. Higher efficiency of the pump is evident in the longer life of the motor pump unit. The new diaphragm designcombined with the new valves makes the pump capable of pulling higher dry vacuum. Duplex II is available in various performance ranges,voltages and with a choice of elastomers, making it easily adaptable to a diverse range of applications.

DUPLEX II SERIES PUMPS12 Volt

Self-priming diaphragm pump with DC electrical motor.

Features:• Two chamber diaphragm design• Self-Priming up to 6 feet suction lift• Can run dry without damage• Automatic operation• Pump housing inlet and outlet are 3/8"NPT female threads• Meets USCG Electrical StandardsDimensions: 3.75"H x 3.25"W x 8.2"L

DUPLEX DIAPHRAGM SHOWER DRAIN PUMPwith Screen12 Volt

PUMP SERVICE PARTS

Features:• Self priming up to 8 feet (2.4 m)• Can run dry without damage• Chemical resistant material• Internal bypass standard• Built-in back flow preventer• Heavy duty ball bearing drive system• UL, CSA & CE models available

Specifications:Pump: Positive Displacement two piston designFlow Rate: 1.6 GPM (6.05 L/min)Ports: 3/8" NPT femaleMotor: Permanent magnet with solid state rectifierVoltages: 12 V DCDry Vacuum: Up to 8 feetPressure Switch Setting: 60 PSIMaximum Fluid Temperature: 140˚FWetted Parts: PolypropyleneNet Weight: 4 to 5 lbs. (2.28 kgs)

705

WATER SYSTEM PUMPS


4405 SERIES WATER SYSTEM WITH BYPASS• Smooth Water Flow, Pumps over 3.3 GPM (12.5 l/min)• Delivers smooth, steady water flow from 1 to 3 GPM without the need for aaccumulator tank

• Special internal bypass feature eliminates pulsating water and pressure switch chatter• Designed for up to 5 fixtures• Runs dry without harm to the pump• Includes plug-in ports for easy installation:

Two 1/2" Qest portsTwo 1/2" hose barb ports

• Install with new FLOJET strainer (not included) to protect pump from debris

4325 SERIES HEAVY DUTY WATER SYSTEM PUMP• For use with a 1 to 5 gallon (3-20 liter) accumulator tank - 4.5 GPM (17.0 l/min)• Designed for 6 or more fixtures• Provides quiet operation and smooth flow• Runs dry without harm to the pump• Includes plug-in ports for easy installation: Two 3/4" hose barb portsTwo 3/4" garden hose ports

• Install with new FLOJET strainer (included) to protect pump from debris

ORDER NO.Model Volts Open Flow Pressure Amp Draw StrainerGPM (l/min.) Shut Off @10 PSI (0.7 bar) Included

440-51430 04405143A12V dc 3.3 (12.5) 35 PSI 3.9 No

HIGH VOLUME WATER PRESSURE SYSTEM• Integrated pump and accumulator tank system• Compact design installs easily in convenient locations• May be mounted vertically or horizontally• Supplies 4.5 GPM (17.0 l/min) up to 6 GPM (22.7 l/min) with fully charged tank• Can run dry without harm• FDA materials in pump and accumulator tank for drinking water• Self-priming up to 10 ft. (3.1M)• Includes assorted ports for easy installation• Accumulator tank has total volume of 1.1 Gal. (4.1 L)

QUAD II SHOWER DRAIN PUMP• Transfer pump for shower and grey water• Runs dry without damage to the pump• Manual on/off switch or automatic level control may be connected to pump (Notprovided)

• 12 Volts dc• Includes plug-in ports for easy installation: Two 1/2" hose barb ports• Install with new FLOJET strainer (not included)• 3/4" port fittings and strainer also available

ORDER NO. Model Volts Open Flow Pressure Amp Draw StrainerGPM (l/min.) Shut Off @10 PSI (0.7 bar) Included

122-02020 LF122202A 12V dc 1.1 (4.3) 22PSI-35PSI 1.9 No(1.5-2.4)

122-00020 LF122002C 12V dc 1.1 (4.3) N/A 1.9 No

LF-12 SERIES PUMPS• Compact automatic demandwater system pump

• Supplies up to 3 fixtures,one or two at a time

• Built-in pressure switch automaticallystarts and stops pump when faucet isopened and closed

• Self-priming so pump can be locatedabove water tank• Runs dry for extended periods of time• Built-in thermal protector• Also available without switch for manualapplication

NOTE: Positive displacementpumps, like this one must beoperated with an on/offswitch. Do not shut off thesepumps with a valve.

440-51430Dimensions:3.75"H x 6.3"W x 8.2"L (95 x 160 x 208 mm)Shp. Weight: 3.9 lb. (1.8 kg.)35 psi = 2.5 barService kit 204-09043

432-51430Dimensions: 3.75"H x 6.3"W x 9.9"L (95 x 160 x 252 mm)Shp. Weight: 6.0 lb. (2.8 kg.)40 psi = 2.8 barService kit 204-09043

284-01000Dimensions: 7.2"H x 11.3"W x 12.8"D (191 x 286 x 325 mm)Shp. Weight: 8.8 lb. (4 kg.)Service kit 204-09043

122-02020 122-00020Dimensions: 2.3"H x 3.5"W x 6.2"L (58 x 89 x 157 mm)Weight: 1.3 lbs. (.6 kg.)

410-51430Dimensions: 3.75"H x 6.3"W x 8.2"L (95 x 160 x 208 mm)Shp. Weight: 3.9 lb. (1.8 kg.)Service kit 204-09043

AUTOMATIC & MANUALSINGLE FIXTURE DEMANDPUMPS


432-51430 04325143A 12V dc 4.5 (17) 40 PSI 6.0 Yes

ORDER NO. Model Volts Open Flow Pressure Max AmpGPM (l/min.) Shut Off

284-01000 02840100A 12V dc 4.5 (17) 40 PSI (2.8 bar) 10.0


410-51430 04105143A 12V dc 3.3 (12.5) N/A 4.0 No

QUAD II WATER SYSTEMPUMPS

706

ORDER NO. Model Volts Open Flow Pressure Amps Strainer NozzleDC GPM (l/min.) Shut Off Nom*

432-51430 4325-143A 12 4.5 (17) 20 - 40 6.0 Yes No432-51431 4325-143L 12 4.5 (17) 20 - 40 6.0 Yes Yes

• Automatic high performance pump for deck and anchor wash down• Self-priming• Automatic pump shut-off feature when hose nozzle is in off position• For fresh or salt water use• May also be used for full flow bait tank circulation• Includes plug-in ports for easy installation:

Two 3/4" hose barb portsTwo garden host ports

• Pressure nozzle, non-corrosive and 3/4" hose barb inline strainer

PREMIUM PLUS MODELS• Delivers over 4.5 GPM (17.0 l/min)• Powerful favorite in the sport fishing, commercial

fishing and work boat markets• 'L' includes nozzle and strainer*

PREMIUM MODELS• New larger motor for more power• Delivers over 3.5 GPM (13.5 l/min)• Ideal for cleaning pleasure boats, fish boxes,

scaling stations, anchor chains & dinghies• Great value for recreational boat users• 'A' includes strainer; 'L' includes nozzle and strainer• May also be used for full flow bait tank circulation


430-51441 4305-144L 12 3.5 (13.5) 20 - 40 5.0 Yes Yes

• Self-primes up to 10 feet above the bilge• Runs dry without damage to the pump• Manual on/off switch or automatic level control may be connected

to pump (Not provided)• Discharges over 5 GPM (18.9 l/min)• Draws only 8.0 Amps at 10 PSI• 12 Volts dc• Includes plug-in ports for easy installation:

Two 3/4" hose barb portsTwo garden hose ports

• Also includes new 3/4" hose barb inlet strainer

ISO 8849 CertificationPressure 0kPa 10kPa 20kPaLitres/min 18.9 17.5 15.0

*Nominal amp draw @ 10 PSI (.7 bar); amp draw @ 40 PSI(2.8 bar) = 9.2 amps (12V)Dimensions: 3.75"H x 6.3"W x 9.9"L (95 x 160 x 252 mm)Shp. Wt. 6.0 lb. (2.8 kg.) 20-40 psi = 1.4-2.8 barService Kit 204-09043

Dimensions: 3.75"H x 6.3"W x 8.6"L (95 x 160 x 218 mm)Shp. Wt. 4.5 lb. (2.1 kg.)20 - 40 psi = 1.4 - 2.8 barService Kit 204-09043

ORDER NO. Model Volts Open Flow Pressure Amp Draw StrainerDC GPM (l/min.) Shut Off @10 PSI (0.7 bar) Included

410-55010 4105-501 12V dc 3.3 (12.5) N/A 3.6 Yes412-55020 4125-502 12V dc 5.0 (18.9 N/A 8.0 Yes

4105 ModelsDimensions 3.75"H x 6.3"W x 8.2"L (95 x 160 x 208 mm)Shp. Wt. 3.9 lb. (1.8 kg.)

4125 ModelsDimensions 3.75"H x 6.3"W x 9.9"L (95 x 160 x 252 mm)Shp. Wt. 6.0 lb. (2.8 kg.)

Dimensions: 3.75"H x 6.3"W x 9.9"L (95 x 160 x 252 mm)Shp. Wt. 6.0 lb. (2.8 kg.)


412-51140 4125-114A 12V dc 5.0 (18.9) N/A 8.0 Yes No

WARNING: PUMPS ARE NOT TO BE USED FOR PUMPING GASOLINE OR FLAMMABLE LIQUIDS.EXPLOSION AND DEATH COULD OCCUR.

Model 4105 Series - 3.3 GPM (12.5 l/min.)

Model 4125 Series - 5.0 GPM (18.9 l/min.)

QUAD II WASHDOWN PUMPS

QUAD II BILGE PUMP

QUAD II GENERAL PURPOSE& BAIT TANK, LIVEWELL PUMPS

General Purpose Applications• Diesel Fuel Transfer• Liquid Transfer Jobs• Dockside Pumping• Dewatering or Circulation• Engine Oil Changing• Bait tank/Livewell pumps are calibrated for correct water movement(6 water changes per hour) Important for maintaining lively bait

• Model 4105-501 for use with 15 - 30 gallon tanks (60 - 120 liter)• Model 4125-502 for use with 30 - 50 gallon tanks (120 - 200 liter)• General purpose pumps are fitted with oil resistant elastomers,

allowing pumping of diesel fuel, used warmengine oil and liquid transfer or dewatering

• Self-priming. May be mounted above the water line• Designed with heavy duty ball bearings,

thermal overload protection and a continuousduty motor for long life

• Provides quiet operation and smooth flow• Runs dry without harm to the pump• Includes plug-in ports for easy installation:

Two garden hose portsTwo 3/4" hose barb ports

• Also includes a 3/4" inlet strainer

NOTE: Positive displacement pumps, like those must be operated with an on/off switch.Do not shut off these pumps with a valve.

For more information see:www.xylemflowcontrol.com

WASHDOWN PUMPS/BILGE PUMP

707

WASHDOWN PRESSURE NOZZLEModel 20446-000• Operates at maximum performance with FLOJET Premium and Premium Plus Washdown Pumps• Corrosion-free, tough thermoplastic material and stainless steel spring• “Quick-Disconnect” allows you to remove nozzle while pump is on• Spray range from fine mist to full volume blast• Adjustable “lock in” position allows for effortless spraying ORDER NO. 204-46000

KEY � � � � � �

MODEL UPPER HSNG VALVE ASSY DIAPHRAGM LOWER HSNG MOTOR PUMP HEAD SIDE CLIPS PRESSURESWITCH

4105-143 204-04004 204-07030 204-03040 204-19001 020-09073*204-06004 204-08000 —

4105-501 204-04005 204-07010 204-03050 204-19005 204-06013 204-08000 —

4125-114 204-04005 204-07010 204-03050 204-19003 020-09080*204-06005 204-08000 —

4125-502 204-04005 204-07010 204-03050 204-19003 020-09080*204-06005 204-08000 —

4305-144 204-04003 204-07030 204-03040 020-09087* 204-08000 020-90118

4325-143 204-04003 204-07030 204-03040 204-19002 020-09080*204-06002 204-08000 020-90118

4405-143 204-04002 204-07030 204-03040 204-19001 020-09073*204-06003 204-08000 020-90104

* Requires new mounting feet (Kit # 207-17100) when used with three-footed Quad Pumps.

FLOJET’S 'QUICK-CONNECT' PORT SYSTEMQuick-Connect Quad port system makes hose removal easy and allows forfast winterizing and system draining. All Quad ports fit directly into pumpand are compatible with new Quad II pumps.• Two ports are included in each Quick-Connect package.

INLET STRAINERS• Keeps debris and particles from entering

your FLOJET pump• Plug-in Quad Port 90° strainer allows for easy installation and

compatibility• Threaded bowl makes cleaning

quick and easy• Stainless Steel 40 mesh screen is

recommended for fresh waterapplications, 20 mesh forraw water andgray water applications

Installation1. Move slide back.2. Push port all the way in.3. Move slide forward to lock.

Removal1. Move slide back.2. Pull port out of pump body.

203-81000 203-81002 203-81006 203-81007 203-81008 203-81009 203-81010

QUAD PORT x QUAD PORT x QUAD PORT x QUAD PORT x QUAD PORT x QUAD PORT x QUAD PORT x1/2" MALE QEST, 1/2" HOSE BARB, 3/4" HOSE BARB, GARDEN HOSE 1/2" MALE QEST, 1/2" HOSE BARB 3/4" HOSE BARB,

STRAIGHT STRAIGHT STRAIGHT ADAPTER 90° ELBOW 90° ELBOW 90° ELBOW

ORDER NO. INLET OUTLET SCREEN174-00000 3/4" Barb 3/4" Barb 40 Mesh174-00020 1/2" Barb 1/2" Barb 40 Mesh174-00030 3/8" Barb 3/8" Barb 40 Mesh174-00040 1/2" M Qest 1/2" M Qest 40 Mesh174-00100 3/4" Barb Quad Port 40 Mesh174-00120 1/2" Barb Quad Port 40 Mesh174-00140 1/2" M Qest Quad Port 40 Mesh

All Quad Ports are 90° elbows.

QUAD II ACCESSORIES

The above part numbers are packaged with 2 fittings per bag.QEST is a registered trademark of U.S. Brass

NOTE:FLOJET Parts & Accessorieswhich we do not stock can be Special Ordered.

Snap-in seal tight ports


Includes Items 1 thru 4

WASHDOWN PRESSURE NOZZLE/SERVICE PARTS

QUAD II ACCESSORIES

QUAD II SERVICE PARTS

708

FRESH WATER PUMPS

For more information see: www.shurflo.com

AQUA KING™ PREMIUM 4.0FRESH WATER PUMP 12VDC• Self-Priming• Sealed Switch• Run Dry Capability• Seamless Shell E-Coated Motor• Ignition & Thermally Protected• 45 PSI Shut Off Pressure• Multi-Fixture Application• 3 Year Warranty• Listed

AQUA KING™ STANDARD 3.0FRESH WATER PUMP• Self-Priming• Sealed Switch• Quiet Performance• Seamless Shell E-Coated Motor• Run Dry Capability• Ignition & Thermally Protected• 55 PSI Shut Off Pressure• Multi-Fixture• 3 Year Warranty• Listed

ORDER NO. Mfr. No. Voltage Dimensions Flow Rate Amps Shut-OffPressure

ValveAssembly

390-10216 3901-0216 12VDC 7.3 x 5.0 x 4.6” 3.0 GPM 5 55 PSI 094-70602


ValveAssembly

490-14212 4901-4212 12VDC 8.3 x 5.3 x 5.0" 4.0 GPM 10 45 PSI 094-66900

SHURFLO® LIVEWELL FILL VALVEKeep your bait alive. The SHURflo® Livewell Fill Valve creates an energized environment that“keeps your bait alive.”The full port fittings (3/4" or 1-1/8") assure the amount of flow required is achieved andmaintained. The adjustable flow valve allows you to adjust the water flow to your desiredamount. 3 Year Warranty

• Adjustable Flow Valve• 3/4" and 1-1/8" Full Port Fittings Included• Low Profile Design• Nylon Construction• Listed

ORDER NO. 330-02100Mfr. No.330-021

AQUA KING™ FRESH WATER PUMPS

LIMITED QUANTITIES

709

FRESH WATER PUMPS


AQUA KING™ II PREMIUM 4.0FRESH WATER PUMP 12VDCDesigned for boats with multiple fixtures. These pumps provide “Just like Home” shower pressure, yet can operate at low flowconditions without cycling. A built in mechanical bypass function enables the pump to vary the flow rate for any demand condition,without the need for an accumulator. This heavy duty motor is built to withstand the marine environment with electro-coatedseamless shell, O-ring sealed end bells, and fully sealed wire entries on the motor shell and pressure switch pumps can run drywithout damage. Inlet strainer and 1/2" NPS-M hose barb fittings included.• Self-Priming• Sealed Switch• Run Dry Capability• Seamless Shell E-Coated Motor• Ignition & Thermally Protected• 55 PSI Shut Off Pressure• Multi-Fixture Application• 3 Year Warranty• Listed

The Next Generation SHURflo pumps guarantee quiet operation and smooth performancewhile providing the ultimate in durability and reliability. Designed and built specificallyfor the harsh marine environment, the Next Generation SHURflo pumps are equippedwith sealed switches and seamless e-coated motors.Thermally Protected. Ignition Protected. 3 Year Warranty

AQUA KING™ FRESH WATER PUMPS


ValveAssembly

414-81530-75 4148-153-E75 12VDC 10.0" x 5.0" x 4.75" 4.0 GPM 10 55 PSI 094-80001


ValveAssembly

415-81530-75 4158-153-E75 12VDC 10.0" x 5.0" x 4.75" 5.0 GPM 15 55 PSI 094-80001

AQUA KING™ II SUPREME 5.0FRESH WATER PUMP 12VDCDesigned for boats with multiple fixtures. These pumps provide “Just like Home” shower pressure, yet can operate at low flowconditions without cycling. A built in mechanical bypass function enables the pump to vary the flow rate for any demand condition,without the need for an accumulator. This heavy duty motor is built to withstand the marine environment with electro-coatedseamless shell, O-ring sealed end bells, and fully sealed wire entries on the motor shell and pressure switch pumps can run drywithout damage. Inlet strainer and 1/2" NPS-M hose barb fittings included.• Self-Priming• Sealed Switch• Run Dry Capability• Seamless Shell E-Coated Motor• Ignition & Thermally Protected• 55 PSI Shut Off Pressure• Multi-Fixture Application• 3 Year Warranty• Listed

710

FRESH WATER PUMPS

EXTREME™ SERIES SMART SENSOR™ 4.0The Smart Sensor™ 4.0 is designed specifically for cruisers and midsize yachts. Delivering 4.0 GPM and pressure up to 50 PSI,this micro-controller based variable speed pump precisely monitors your system’s water pressure and adjusts the motor speed, eliminatingthe need for a pressure switch. SHURflo engineered the Smart Sensor™ 4.0 with a superior four-chamber design that incorporates largeinlet and outlet passages to maximize water flow and efficiency, providing a “Just Like Home” shower and quiet operation. Corrosionresistant coated seamless motor shell and a protected electronic package make the Smart Sensor™ 4.0 capable of handling the harshmarine environment. Thermally Protected. Ignition Protected. 3 Year Warranty• Variable Speed Micro-Processor Controlled• 50 PSI• Silent Operation• Seamless Shell Electro-Coated Motor• Improves Performance of Showers, Heads and Sinks• Runs Dual Water Fixtures Simultaneously• Eliminates Unwanted Water Hammering• Reduces Water Temperature Fluctuations• Multi-Fixture Application• 3 Year Warranty• Listed

EXTREME™ SERIES SMART SENSOR™ 5.7The Smart Sensor™ 5.7 is a micro processor control based variable speed pump that delivers over 5 GPM and pressure up to 60 PSI.SHURflo Smart Sensor™ 5.7 precisely monitors your system’s water pressure and adjusts the motor speed, thus eliminating the need for apressure switch. Corrosion resistant coated seamless motor shell and protected electronic package make the Smart Sensor™ capable ofhandling the harsh marine environment. Thermally Protected. Ignition Protected. 3 Year Warranty• Variable-Speed Operation• High-Flow Capability• High Pressure 60 PSI• Seamless Shell Electro-Coated Motor• Smooth Flow• Reduces Fluctuations in Water Temperature• Improves Performance of Showers, Heads and Sinks• Wide Flow Range for Single and Multi-Fixture Use• Eliminates Unwanted Water Hammering• Multi-Fixture Application• 3 Year Warranty• Listed

EXTREME™ SERIES HIGH FLOW STRAINERSHURflo highly recommends the use of the Extreme™ Series High Flow Strainer, engineered to compliment the higherperformance of the Smart Sensor™, to keep your Extreme™ Series Pumps flowing strong by protecting it from debris inthe water. Easy installation and even easier to clean. 1 Year Warranty

• 50 Mesh Screen Protects Pumps from Harmful Debris• High Capacity• Rugged Nylon Housing with Clear Twist-Off Polyamide Bowl• Easy to Clean Slide-Out Screen• Without bracket ORDER NO. 254-26600

Mfr. No. 254-266


ValveAssembly

590-10211 5901-0211 12VDC 9.25" x 5.0" x 5.50" 5.0 GPM 12 60 PSI 094-03001


ValveAssembly

490-10211 4901-0211 12VDC 8.3" x 5.3" x 5.0" 4.0 GPM 9 50 PSI 094-66900


EXTREME™ SERIES PUMPS

LIMITED QUANTITIES

LIMITED QUANTITIES

711

WASHDOWN PUMPS/LIVEWELL PUMPS


ORDER NO. Mfr. No. Model Tank SizeGallons Dimensions Port Size

Inlet/Outlet Flow Rate Amps

170-01030 1700-001-030 Bait Sentry™ 500 30 4.93" x 7.85" ¾" Inlet NPT¾" Outlet BARB 500 GPH 1.75

170-11030 1700-011-030 Bait Sentry™ 800 40 4.93" x 7.85" ¾" Inlet NPT¾" Outlet BARB 800 GPH 3.5

170-01030170-11030

WASHDOWN PUMPS

BLASTER™ WASHDOWN PUMPSPerfect for tough washdown applications, such as fish box, scaling, and anchor chain cleaning, these rugged self–priming pumps deliver highlift, can run dry without damage, and won’t overheat with extended use. Pumps are ignition protected and switches are sealed against waterdamage. Thermally Protected. Ignition Protected.• Self-Priming• Sealed Switch• Quiet Performance Motor• Run Dry Capability• Seamless Shell Motor-Waterproof• Ignition Protected• 45 PSI Shut Off Pressure• 1 Year Warranty• Listed

PROBLASTER™ II DELUXE 4.0WASHDOWN PUMP 12VDCPerfect for tough washdown applications, such as fish box, scaling and anchor chain cleaning. These rugged self-primingpumps deliver high lift, can run dry without damage and won’t overheat with extended use. Pumps are ignition protectedand switches are sealed against water damage. Thermally Protected. Built to withstand the marine environment withelectro-coated motor, O-ring seals, and fully sealed wire entries. Inlet strainer and 1/2" NPS-M hose barb fittings included.• Self-Priming• Sealed Switch• Quiet Performance Motor• Run Dry Capability• Seamless Shell Motor-Waterproof• Ignition Protected• 60 PSI Shut Off Pressure• 2 Year Warranty• Listed

BAIT SENTRY™ MAG-DRIVE LIVEWELL PUMPSThe Bait Sentry™ Livewell Pumps are designed for easy installation and trouble-free operation. Magnetic Drive technology eliminatesunnecessary failures. Motors keep running after ingesting debris or even running dry. Patented anti-airlock feature allows the pump to cleartrapped air in rough water or when boat is anchored. Includes dual port for easy washdown pump connection. 3 Year Warranty• Magnetically driven impeller, debris will not damage motor• No seals to leak, can run dry continuously• Anti-airlock feature will clear trapped air even in rough water• Second inlet port for washdown pump,requires one thru-hull fitting for two pumps• 12 VDC Continuous Duty• Ignition Protected ISO 8846• UL & Listed• 3 Year Warranty


ValveAssembly

390-12214 3901-2214 12VDC 7.6" x 5.0" x 4.6" 3.5 GPM 6 45 PSI 094-70602


ValveAssembly

424-81530-09 4248-153-E09 12VDC 10.0" x 5.0" x 4.75" 4.0 GPM 10 60 PSI 094-80001

712

WATER SYSTEM ACCESSORIES

CLASSIC SERIES SWIVEL NUT STRAINERSClean, clear economical strainers eliminate unnecessary repairs by keeping debris and other particles out of the pump. Screws directly on thepumphead. Transparent design shows when it is time to clean the bowl. Easy disassembly, cleaning and reassembly. Designed for safety andconvenience. SHURflo accessories are built to last. Big protection from small yet essential products. 1 Year Warranty

• 50-mesh SS screen• Easy to install to pump head• Clear, clean plastic construction makesit easy to see when cleaning is needed

• Keeps debris out of the pump• Easy disassembly for cleaning

PRESSURE REGULATED WALL MOUNT CITY WATER ENTRIESThis combination water regulator and check valve diaphragm design prevents high-pressure damage often caused by city water systems.Leak-tight, stress & crack-resistant, these high-performance water entries limit water pressure safely to 65 PSI while meeting or surpassing allcheck valve code requirements. 1 Year Warranty

• Quick, permanent wall mount• Continuous protection fromhigh pressure surges

• Fits standard hose fittings• Built-in check valve


255-31500 255-32500

183-02914 183-02918

ORDER NO. Mfr. No. Colour183-02914 183-029-14 Chrome183-02918 183-029-18 Gel White

ORDER NO. Mfr. No. Port Size255-31500 255-315 1/2" Pipe Inlet255-32500 255-325 1/2" Barb Inlet

ORDER NO. Mfr. No. Description094-03001 94-030-01 Valve Assembly for 5901 Series Pumps094-23206 94-232-06 Valve Assembly for 2088/2093 Series Pumps094-66900 94-669-00 Valve Assembly for 4901 Series Pumps094-70602 94-706-02 Valve Assembly for 2901/3901 Series Pumps094-80001 94-800-01 Valve Assembly for 4148/4158/4248 Series Pumps


VALVE ASSEMBLIES

@Have a Technical Question?

Contact our Technical Support Staffemail: [email protected]

[email protected]

713


ORDER NO. Connections34344-0000 1/2" slip-on hose inlet and outlet

WATER PRESSURE REGULATORSProtect your boat’s water system, appliances and pump from damaging pressures of unregulated marinawater hookups. Reduce high water pressures(Up to 100 psi [700 kPa] down to 35 psi [240 kPa]). Built-in backflow preventer.Easy to install. Easy-clean in-line filter. Two models: a permanently installed flush mount model and in-line

model with brass garden hose fittings that connectdockside water entry and garden hose water hookup.

HIGH PRESSURE CHECK VALVEWhen located at the pump outlet, this high pressure check valve protects your pump from the damaginghigh pressure of unregulated city water connection. Also can be located at the water heater inlet to preventbackflow of hot water into cold water system and pump.

WATER PRESSURE REGULATORInstall on dock sill cock, then attach hose.

• Maintains 40 Ibs. of pressure on hose• Adjustable from 10-60 psi• Factory set at 40 Ibs.

ORDER NO. Mfr. No. Connections175-01450 01750-145A Panel Mount - White175-02450 01750-245A Panel Mount - Chrome175-00450 01750-045A In-Line - White

Model44410-1000(White)

34344-0000

PUMPGARD™ STRAINERInlet strainer protects all electric diaphragm pumps.

• Prevents unnecessary pump breakdowns caused byparticles in the water.

• Transparent housing allows instant inspection.• Quick, in-place, cleaning of the40 mesh stainless steel screen.

WATER PRESSURE REGULATORSDesigned for day and night protection of the entire plumbing systemfrom unregulated city water hook-ups, the new Flojet regulator willmaintain regulated output at low or high flow rates. The removablestrainer protects valves and seal seats from debris.Convenient 90 degree swivel elbow at panel mount outlet.Water pressures from 46-150 psi will be regulated down to 45 psi,lower pressures will pass through unregulated.

175-00450175-02450175-01450

Fitting: Choose connections for 3/8", 1/2", 3/4" ID hose, or 1/2"-14 pipe.Size 4-3/4" long x 2-3/4" wide x 2-1/2" high (12cm x 7cm x 6cm).


ORDER NO. Type Discharge Port44410-1000 Flush 1/2" MP White44410-2000 Flush 1/2" MPT Chrome

ORDER NO. Mfr. No Description144-00201 201A Water Pressure Regulator

WATER PRESSURE REGULATORS

ORDER NO. Model for 1/2" (13mm) ID hose

46400-0002 Model for 1/2" (13mm) ID hose

46400-0012 Model for 1/2" (13mm) hose inlet 90° and direct plug intoPAR-Max inlet port

46400-0004 Model for 1/2"-14 pipe threads

46400-0014 Model for 1/2"-14 pipe inlet 90° and direct plug intoPAR-Max inlet port

46400-0000 3/4" (19mm) ID hose x 3/4" (19mm) ID hose 40 mesh SS

46400-0003 3/8" (10mm) ID hose x 3/8" (10mm) ID hose 40 mesh SS

46400-0010 3/4" (19mm) ID hose x Plug-in 40 mesh SS 90°

46400-0375 3/8" NPT (F) x 3/8" NPT (F) 40 mesh SS

18753-0040 Replacement 40 Mesh SS Filter

For more information see: www.nhsmarine.com

714

WASHDOWN PUMPS/WATER PRESSURE SYSTEMS


AQUA JET WASHDOWN PUMPSAs a washdown pump, the Aqua Jet offers much higher pressures than competitive models,making clean-up faster and easier than ever before. Complete with trigger nozzle, PUMProtector™,inlet strainer and hose connections for 1/2" hose. Includes both BSP and NPT connections.

AQUA JET WATER PRESSURE SYSTEMSThe five chamber Aqua Jet WPS-series provides a reliable heart for small boat and recreational vehicle water pressure systems. Compared toconventional three or four-chamber diaphragm pumps, the Aqua Jet demonstrates dramatically lower noise and water pulsation characteristics.It is recommended to install the WPS-pumps with an accumulator tank. Aways use a PUMProtector™ inlet strainer before the pump intake.

WATER PRESSURE SYSTEM PUMP1.1 GPMIndustrial, RV, Marine Agricultural Pump• 12 Volt, Amps: 2.5 • Smooth Operation•Open Flow: 1 GPM, 3.8 lpm • Self-Priming• 35 PSI • Silent Running•Duty Cycle: Intermittent • Low Power Draw•Runs dry without damage • Easy connecting system 3/8" barbDECK WASH FLUSH MOUNTSingle outlet, single flush• 316 Stainless steel• Connects and disconnects under full pressure• Positive lock bayonet connector• Double viton O-ring seals• Large flow capacity• Connections made of Nylon 66•Garden Hose Connector

MODEL - WD 5.2Dimensions:Motor: 185 W, 12/V DCwith built-in thermal protectionLength 9.46" (240 mm)Width: 8.42" (214 mm)Height: 4.33" (110 mm)Weight: 4.5 Ibs. (2 kg.)

MODEL - WPS 5.2Dimensions:Motor: 150 W, 12/V DCwith built-in thermal protectionLength 9.46" (240 mm)Width: 8.42" (214 mm)Height: 4.33" (110 mm)Weight: 4.5 Ibs. (2 kg.)

MODEL - WD 3.5Dimensions:Motor: 120 W, 12/V DCLength 9.31" (236.5 mm)Width: 8.25" (210 mm)Height: 4.575" (116 mm)Weight: 4.5 Ibs. (2 kg.)

MODEL - WPS 3.5Dimensions:Motor: 85 W, 12/V DCLength 9.31" (236.5 mm)Width: 8.25" (210 mm)Height: 4.575" (116 mm)Weight: 4.5 Ibs. (2 kg.)

ORDER NO. Mfr. No. Description Capacity Pressure Fuse ConnectionCut Off Size

101-33993-1 10-13399-0311 WD 3.5, 12V 13 I/min-3.5 GPM 5 bar - 70 psi 15 A 1/2" NPT / hose 3/4", GHT 3/4",Clamshell Packaging 3/8" BSP x 1/2" barb

101-34077 10-13407-07 WD 5.2, 12V 20 I/min-5.2 GPM 5 bar - 70 psi 20 A 1/2" NPT / hose 3/4", GHT 3/4",3/8" BSP x 1/2" barb

ORDER NO. Mfr. No. Description Capacity Pressure Fuse ConnectionCut Off Size

101-33953 10-13395-103 WPS 3.5, 12V 13 I/min-3.5 GPM 2.8 bar - 41 psi 10 A 3/8" NPT / hose 1/2",1/2" NPT / hose" 3/4",1/2" NPT, 3/4" hose"

101-34067 10-13406-107 WPS 5.2, 12V 20 I/min-5.2 GPM 2.8 bar - 41 psi 15 A 3/8" NPT / hose 1/2",1/2" NPT / hose" 3/4",1/2" NPT, 3/4" hose"

Mfr. No. 61121ORDER NO. 106-61121

Mfr. No. 10-22020-101ORDER NO. 102-20201

715For more information see: www.johnson-pump.com

AQUA JET FLOW MASTER 5.0 WATER PRESSURE SYSTEM

The Flow Master 5.0 is a five chamber positive displacement diaphragm pump that is an ideal choice forpressurizing water in a closed system such as that found in a boat or recreational vehicle. The digital controller automatically adjustswater flow as the demand is increased and decreased while maintaining a very smooth flow. The unique variable flow feature of the Flow

Master pump allows the pump to be mounted without an accumulator tank and still maintain an even flow regardless if one or multiple tapsare being used. Exclusive soft start feature of pump makes it virtually silent when low water flow is required. Stainless steel base plate andfasteners for corrosion resistance and the motor has built in thermal overload protection.Comes standard with PUMProtector™ inlet strainer and multiple port options for most applications.

Specifications:Dimensions 9.4"long x 8.22" wide x 4.49" highWeight 4.5 Lbs.Motor WPS 5.0 - 150 W, 12Volt DC (with built-in thermal protection)Body Nylon/PolypropyleneValves Santoprene/EPDMDiaphragm SantopreneCapacity 19L/min - 5 GPMCut-Off Pressure 3.5 bar/50 psiFuse size 15 AConnection 3/8" NPT / hose 1/2", 1/2"NPT / hose 3/4", 1/2" - 14 NPSM 1/2" CTS

Mfr. No. 10-13329-103ORDER NO. 101-33293

Mfr. No. 64634ORDER NO. 106-64634 (12V)

Mfr. No. 64534CLORDER NO. 106-64534-CL (12V)(Clam Shell Packaging)

AQUA JET WASHDOWN/LIVEWELL PUMP KIT 5.2Aqua Jets washdown pump kit makes it easy to add a washdown and livewell pump to any boat

AquaJet 5.2WD Pump Kit Includes:• Max. Pressure 5 bar (70 psi) pump, 1/2" NPT/hose 3/4", 3/4" GHT550• 500 GPH Twin Port livewell pump, inlet 3/4" NPT X 1" lengthDischarge livewell 3/4" straight or 90º hoseDischarge WD 1/2" FNPT, 3/4" MNPT or 3/4" hose• PUMProtector™ inlet strainer• Spray nozzle• Bulk head fitting with valve, - inlet 3/4" hose, outlet 3/4" GHT• Aerator head, 3/4" hose• 25' (7.5 m) of coiled wash down hose 3/4" GHT• 2 illuminated panel switches

AQUA JET WASHDOWN PUMP KIT WITH HOSEAqua Jets washdown pump kit makes it easy to add a washdown pump to any boat

• Quiet 5 chamber diaphragm pump design• 5.2 GPM/20 I/min Wash Down Pump• Max. Pressure 5 bar (70 psi)• Duty Cycle: Intermittent, Max 20 min.• Connection 3/8" BSP, 1/2" hose - 1/2"NPT, 3/4" hose - 3/4" GHT• 25' Coiled hose (7.5 m), hose 1/2" I.D• Includes easy-push connectors 3/4" hose & 3/4" GHT (garden hose)• Suitable for fresh and salt water• Can be run dry without damaging pump• Corrosion resistant construction• Self-priming• With integrated auto pressure switch to turn on & off (When nozzle is open/closed)• PUMProtector™ inlet strainer (Easy to push-in)• Spray nozzle with pistol grip rear trigger design• Unique adjustable flow control dial• Ignition protected according to ISO8846

WASHDOWN PUMP & KITS

716

MISCELLANEOUS PUMPS & ACCESSORIES


DECKWASH KIT FOR F4B-19For Convenient Deckwash

Includes• Check Valve• Pressure switch• Trigger nozzle

ORDER NO. 094-65530Mfr.No. 09-46553

Features:• Ignition protected motor, conforming with ISO 8846 Marine• Mounting bracket for easy replacement• Extremely energy efficient• Rotary cutter casing of PET (thermoplastic polyester)• Directly connected to sewage tankline or holding tank• Hose Connectin: Inlet 1-1/2" dia. Hose or 1-1/2" NPT Outlet 1" hose

COMPACT SHOWER DRAIN /BILGE & WASTE WATER PUMPViking Power 16Single - chamber, self priming diaphragm pump that can be set up inseveral different pump/motor configurations.Features:• Specially designed to pump waste water• Easy to install, even in tight spaces• Quiet operation• Easy, low cost maintenance• High-impact glass-fiber reinforced nylon body• Ball-bearing supported transmission• Non-choke valves - no filters required• Self-priming up to 3 meters (9.8 feet)• Can be run dry and can pump air/water mixture• Robust single diaphragm• KlickTite™ XL connectors standard• 12 Volt• Low power consumption• Complies with ISO15083 and small craft bilge pump standard forvessels up to12 meters (39.4 ft)

ORDER NO Mfr. No. Model No. Motor Impeller Seal Length Width Height102-44531 10-24453-01 TA3P10-19 12VDC 671-00007 Lip Seal 9.06" 4.25" 3.23"

TA3P10-19 MACERATOR PUMPThe Johnson TA3P10-19 Macerator Pump takescare of toilet waste, shredding it before it ispumped into or out from the holding tank.CE-approved.

VACUUM SWITCHFor automatic shut off operation to prevent pump damageThe vacuum switch works with all self-priming impeller pumps andshould be used for e.g. bilge pumping/emptying of tanks to prevent thepump from dry running. The vacuum switch automatically shuts the pumpoff when the bilge/tank is dry. With the switch fitted, you can start thepump by remote push button or manually bydepressing lever on the switch.

ORDER NO. 671-45053Mfr.No. 09-45053

Technical Specifications:Capacity: 16 I/min (4.2 GPM) open flow (15 I/min at 0.1 bar)Max. Head: 3 meters (9.8 feet)Max. Lift: 3 meters (9.8 feet)Max. Head & Lift: 4 meters (13.1 feet)Dimensions: 186 mm - 7.32” long

235/181 mm - 9.25"/7.13" wide118/204 mm - 4.65"/8.03" high

Connection: KlickTite™ XL connectors for 1" hose or 3/4" hoseand 1/2" NPT/1/2" - 14 NPSM threads; straightand 90º

Motor: 40 W at 1m head,12 VDC ( with built-in thermal protection)

Body: Nylon glass-fiber reinforcedValves: Nitrile rubberDiaphragm: Reinforced nitrile rubber

ORDER NO. 101-13350Mfr. No. 10-13350-03

ORDER NO. Pump Model Mfr. No. Pump Impeller/Service Kit Connection Length Width Height Weight DriveBody Shaft

102-45695 F35B-8007 10-24569-51 Bronze 09-808B-1 / 671-00001 3/8"NPT 109 mm / 4.29" 80 mm / 3.14" 30 mm / 1.18" 1.2 lbs 3/8"09-46840 / 671-10014 (Service Kit)

102-45705 F4B-8007 10-24570-51 Bronze 09-810B-1 / 671-00013 3/8" NPT 111 mm / 4.37" 80 mm / 3.15" 50 mm / 1.97" 1.8 lbs 3/8"09-810B-9 / 671-0001409-46841 / 671-10015 (Service Kit)

102-457151 F5B-8007 10-24571-51 Bronze 09-1027B-1 / 671-00003 3/4" NPT 151 mm / 5.95" 106 mm / 4.17" 50 mm / 1.97" 3.5 lbs 5/8"09-1027B-9-00 / 671-0001009-46843 / 671-10012 (Service Kit)

102-45725 F7B-8007 10-24572-51 Bronze 09-1028BT-1 / 671-00005 1" NPT 170 mm / 6.69" 120 mm / 4.72" 50 mm / 1.97" 4 lbs 5/8"09-1028B-9 / 671-00011

101-302195 F8B-8007 10-13021-95 Bronze 09-819B-00 / 671-00017 1-1/4" NPT 217 mm / 8.54" 160 mm / 6.3" 65 mm / 2.56" 13 lbs 1"09-819B-9 / 671-0001809-45575 / 671-10016 (Service Kit)

101-302196 F8B-8007 10-13021-96 Bronze 09-819B-00 / 671-00017 1-1/2" NPT 217 mm / 8.54" 160 mm / 6.3" 65 mm / 2.56" 13 lbs 1"09-819B-9 / 671-0001809-45575 / 671-10016 (Service Kit)

1 Year Warranty

Rebuilt Kit671-10007

SELF-PRIMING ALLROUND FLEXIBLE IMPELLER BRONZE PUMP -HEAVY DUTY IMPELLER PUMPExcellent self-priming capability. Ideal as cooling water pump for marine engines, bilge pumps, deck washpumps, fresh water pumps, fuel transfer pumps and other applications. Also ideally suited on shore to emptyseptic tanks, to flush clean and to fill water tanks.

Approved

717

DC FLEXIBLE IMPELLER PUMPS


DC DRIVEN FLEXIBLE IMPELLER PUMPFor bilge pumping, deckwash, water circulation, oil and diesel refuelling at dockside service, etc. Note: Do notuse for pumping paraffin or other thin petroleum products. Vacuum switch available for models F3B-19 & F4B-19 ORDER NO. 671-45053.F3B-19Pump body: Bronze. Connection for vacuum switchShaft: Stainless SteelImpeller: 09-1052S-9 (nitrile)Seal: Lip sealHose Connection: 3/8" NPTMotor: 12 V DCDimensions and weightLength: 6.7"Width: 4.4"Height: 3.22" Mfr. No. 10-24516-03Weight: 4.5 lbs. ORDER NO. 102-45163

DC PUMP FOR BILGE, DECKWASH & REFUELLINGF38B-19 - 12VOLTPerfect for bilge pumping, deckwash, water circulation, oil and diesel refuelling at dockside service, etc.These pumps may be combined with a vacuum switch for automatic operation. Capacities vary from 14I/min to 55 I/min, allowing the proper matching of the pump to the application. All motors are heavy duty toprovide long service life even under heavy use.ORDER NO. 102-472703 Mfr. No. 10-24727-03

F4B-19Pump body: BronzeShaft: Stainless SteelImpeller: 09-824P-9 (nitrile)Seal: Lip sealHose Connection: 1-1/2" NPTMotor: 12 V DC

Dimensions and weightLength: 8"Width: 4.72"Height: 3.54"Weight: 6.6 lbs.

+ Items contained in Seal Kit.Pressure and capacity data (Based on water at 20°C/68°F)

+ Items contained in Seal Kit.

REPLACEMENT PARTS671-10007 09-45595 Service Kit671-00007+ 09-1052S-9 Impeller (Nitrile)671-20004+ 0.2233.007 Lip Seal671-30006+ 0.2173.436 Gasket

ACCESSORY

094-65530 09-46553Wash Down KitIncludes Pressure Switch,Check Valve & Nozzle

REPLACEMENT PARTS for 102-472703 & 102-46893

671-10010 09-46600 Service Kit

671-00022+ 09-824P-9 Impeller (Nitrile)

671-20004+ 0.2233.007 Lip Seal

671-06597+ 0.2173.476 Gasket / O-Ring

671-04643+ 0.0142.737 End Cover Screw

+ Items contained in Seal Kit.

HEAVY DUTY IMPELLER PUMP - 1/2'' HOSEA fully equipped, self-priming multi-purpose pump operating on a simpleand uncomplicated principle. Ideal for pumping water, oils and chemicals.Do not use for pumping paraffin or other thin petroleum products.

F2P10-19Pump body: PTMT (thermoplastic polyester)Shaft: Stainless SteelImpeller: 09-1077B-9 (nitrile)Seal: Lip sealHose Connection: 1/2" (dia. 13 mm)Motor: 12 V DC, ignition protected

Dimensions and weightLength: 6.77"Width: 4.61"Height: 3.07"Weight: 3.53 lbs.

Multi-Purpose Pump 3.8 gpm / 1/2" hose barbMfr. No. 10-24180-1 ORDER NO. 102-41801

REPLACEMENT PARTS

671-10008 09-45594 Service Kit

671-00008 + 09-1077B-9 Impeller (Nitrile)

671-20003 + 0.2233.402 Lip Seal

Mfr. No. 10-24689-03ORDER NO. 102-46893

Pump Body Replacement Seal Connection Length Width Height WeightImpeller

Bronze 09-824P-9 Lip Seal Hose 1" / 1/2"NPT 180mm / 7" 120 mm / 4.72" 90 mm / 3.54" 6.6 lbs


GALLEY PUMPS/FAUCET HAND PUMPS

This economical compact pump delivers drinking water from a water tank to the106-61420 Three Way Faucet Hand/Pump. Seal allows it to run dry without damage.Made from high-impact plastic. Patented. Inlet and outlet have combination fittings: 3/8" barbs canbe removed to accommodate 1/4" NPT fitting. Potable Water Pump is not activated by line pressure.Pump is non-submersible.Note: Mount centrifugal pump so water will flow into the pump.Caution: Not external ignition protected.

ORDER NO. Mfr. No. Inlet/Outlet Size GPH Max. Head Amp Draw Fuse Size106-61260 6126-7 3/8" barb, or convert to 1/4"NPT 150 16' 1.5 2-amp

POTABLE WATER PUMP

Made from high-impact plastic IAPMO listed. CSAapproved. Use as a 2-way hand operated pump in a self-contained water system, or as an ordinary faucet in apressurized system. For 1/2" female pipe thread fitting.

Description: 2-wayInlet/Outlet Size: 1/2" ID or 3/8 ID"Fitting: BarbedORDER NO. 106-61430 Mfr. No. 6143-1

Use as a 3-way manual pressurized or electric 12 VoltDC drinking water faucet,with 106-61260 Potable WaterPump. Delivers water immediately. Includes adapters for3/8'' ID hose or 1/4" tapered male thread fitting. Singlefixture eliminates the need for separate faucets onseparate water systems.Description: 3-way electric with 3/8" and 1/4" adaptersORDER NO. 106-61420 Mfr. No. 6142-5

FAUCET AND HAND PUMPSThese check-tees provide a combination check valve and tee that replaces additionalconnections for RV and marine hookups. Check-tees allow water to flow in from thedockside connection without filling the tank. They are constructed of tough ABS plastic.

CHECK-TEES

FAUCET REPAIR KIT

Combination FittingsInlet and outlet have combinationfittings: comes with 3/8" barbs thatcan be removed to accommodate1/4" NPT fitting. 1/2" NPT fitting fordockside water connection.Mfr. No.6115-1ORDER NO. 106-61150

Combination Inlet / Threaded OutletInlet has combination fitting: comes with 3/8"barbs that can be removed to accommodate1/4" NPT fitting. Outlet is 1/2" NPSM. 1/2" NPTfitting for dockside water connection.Mfr. No. 6115A1ORDER NO. 106-61151

The economical answer to running water at the push of a button.• 1 gpm• Available with or without faucet with stainless steel swing spout• Pump must be installed in flooded suction position• On/off switch is built into the faucet base• Connections for 3/8'' ID hose• Dimensions: 4-1/2"L x 2-1/2"W x 1-3/4"HORDER NO. Description42510-0000 Pump Only, 12VDC, fuse 3 amp42520-0000 Faucet Only42530-0000 Pump and Faucet, 12VDC, fuse 3 amp

ELECTRIC GALLEY PUMP & FAUCET


Includes replacement knob pin, two flapper valves, stainless steeldisk plus all gaskets and seals for use with 106-61420 & 106-61430.

ORDER NO. 106-61270Mfr. No. 6127-3

719

GALLEY PUMP, SINK & SHOWER SYSTEM

GALLEY PUMPInjection Molded Delrin

ORDER NO. Mfr. No. OUTPUT A FASTENER425-17060 517060-3 3 gpm 1/2" hose #8 RH425-17065 517065-1 Pump Repair Kit

ORDER NO. Mfr. No. A B C D E F425-17425 517425 1-1/2” 13-1/4” 11-1/4” 10-1/2” 8-9/16” 5-5/16”

*Uses Drain Tube with stopper ORDER NO. 425-17515

ORDER NO. Mfr. No. Function Hose Length104-41310 4131-4 Hot/Cold 6'

SHOWER SYSTEMAft-Deck ShowerThese shower systems install flush in the transom or under the gunwale. Includes hinged cover andreplaceable sprayer head. Fixtures are corrosion resistant. Housing and cover are made of high-impact,UV resistant, engineering-grade plastic and are pre-drilled for six #8 screws.Comes with 6' hose, shut-off, and hot/cold mixing controls.Connects to freshwater system for showering.

DRAIN TUBE WITH STOPPER• Chrome/Brass• Straight 1- 1/4”• Includes stopper with chain*Drain tube used on Oval sink ORD. # 425-17425Mfr. No. 517515-1ORDER NO. 425-17515

SINK DRAIN WITH STRAINER• Zinc/Stainless• Straight 2”*Sink Drain with Strainer used on sink # 517415 & 517445Mfr. No. 517525-1ORDER NO. 425-17525

OVAL BOWL SINK300 SERIES SATIN FINISH 16 GA. STAINLESS STEEL

For more information see www.sea-dog.com


720

1 2

Fig. ORDER NO. Description1. 438-00740 Foot Valve for Guzzler 4001. 438-00750 Foot Valve for Guzzler 5002. 438-00840 Suction Hose Strainer / 4002. 438-00850 Suction Hose Strainer / 500

For more information see: www.thebosworthco.biz

GUZZLER HAND PUMPSUse Guzzler hand pumps to dewater bilges, or any place emergency pumping is required. Rugged construction of Dupont Delrin, with reinforceddiaghragm and flapper valves make Guzzlers impervious to many fuel oils, solvents and detergents. They will even handle small stones and slurrywithout hampering use. Guzzler 400 uses 1" hose - Guzzler 500 uses 1-1/2" hose.

Guzzler 400-HHand Pump

MODEL 400-HHorizontal Mount# 438-04000

MODEL 400-VVertical Mount# 438-04001

MODEL 500-HHorizontal Mount# 438-05000

MODEL 500-VVertical Mount# 438-05001

Guzzler 400-VHand Pump

Guzzler 500-HHand Pump

Guzzler 500-VHand Pump

For use with Guzzler 400 & 500Vertical Mount Pumps only.Mfr.No. 34ORDER NO. 438-00340

SEA-LECT Y-VALVEUse the SEA-LECT Y-Valve with any pump - portable, electric ormounted hand-pump. It can be mounted in any handy place between thepump’s intake and the hose leading to the boat’s low water points.Fits 1", 25.4 mm I.D. hose or 1-1/2", 31.8 mm I.D. w/adapters.

ORDER NO. Size438-00940 1'' for Guzzler 400438-00950 1-1/2'' for Guzzler 500

Sea-Lect Y-valveModel 94

Sea-Lect Y-valveModel BM-95

REPLACEMENT PARTS FOR GUZZLER400/500ORDER NO. Description438-00080 Handle Only (Vertical) / 400 & 500438-00090 Horizontal Handle w/Actuator / 400 & 500438-00130 Diaphragm (Buna-N) / 400 & 500438-14400 Flapper Valves (pr.) / 400438-14500 Flapper Valves (pr.) / 500438-15400* Service Kit / 400438-15500* Service Kit / 500

*Service Kit contains Diaphragm & Flapper Valves

THRU-DECK MOUNTING KITQuick, permanent mounting below deck, seat or cockpitsole. Kit includes 1-Delrin Deck Plate, 1 watertight boot,1 set of spacers with S.S. Screws.Use only with Vertical Handle.

DIAPHRAGM PUMPS & ACCESSORIES

SPECIFICATIONS & DIMENSIONS

ORDER NO. TYPE Capacity Dimension Port Size Hand StrokeL x W x H I.D. O.D.

GUZZLER 400438-04000 400 Horizontal 10 GPM / 37.9L 10" x 5" x 4" / 3/4" (19mm) 1" (25.4mm) 7" (12.8cm)438-04001 400 Vertical 25.4cm x 12.7cm x 10.1cm

GUZZLER 500438-05000 500 Horizontal 15 GPM / 67.5L 10" x 5" x 4" / 1-1/4" (31.7mm) 1-1/2" (38.1L) 7" (12.8cm)438-05001 500 Vertical 25.4cm x 12.7cm x 10.1cm

721

HAND/DIAPHRAGM PUMPS

5 Year Warranty

PORTABLE HANDPUMPConstructed of sturdy ABS plasticwith comfort-grip handleproviding smooth firm strokes.Capacity: 10 GPMHose Size: 1-1/8" I.D.Size: 36"

ORDER NO. 272-00168Mfr. No. 168Pump with 4 ft. hose

18" HAND PUMP W/ HOSELight, tough, durable easy handling, extra fastpumping hand pumps are ideal stow aboards. Comfortablehandle grip and extra large capacity makes manual pumpingsomewhat less of a chore. Ideal for emergency pumping andwhere electrical current is not available.General Features:• High Impact plastic• Chemical and fuel resistant plunger• 8 strokes per gallon• 100% factory tested• 1-1/8" discharge with 3’ hose• Size:18"• 3 year warrantyORDER NO. 847-20195Mfr. No. 20195



For more information see: www.scotty.com

HANDPUMPS• Large handle for easier operation• Stainless steel piston rod for strength & durability• Easily disassembled for cleaning• 1-1/2" barrel diameter means quick pumpouts• Includes 24" of 1-1/8" black bilge flex hose

ORDER NO. Mfr. No. Description382-05441 544K 13-1/2" Kayak Pump

# 29266-1000Additional Push-FitElbow for UniversalPump

AMAZON UNIVERSALFor mounting on bulkhead, through bulkhead, on deck, or through deck(with optional through deck kit). Readily achievable 22 gallons/min outputFeatures:• Unique safety feature allows operation from both inside and outside the cabin(with optional Through deck kit)• Flow rate of up to 25 gpm• Self-priming up to 10 ft• Push-fit inlet and outlet elbows swivel through 360˚ to increase flexibility of installation• Corrosion resistant materials throughout• Quick release clamp ring gives fast access for blockage clearance• 1-1/2” ports give excellent solids handling ability for use with holding tanks• Stainless steel handle supplied with mounting clips and provision for safety lanyard• Dimensions: 9-1/2”W x 9-1/2”H x 6” D• Connections for 1-1/2” ID hose

Through Deck

On Deck

On Bulkhead

Replacement Parts for # 145Hand PumpORDER NO. Description272-00280 Diaphragm272-00141 Valve Repair Kit

ORDER NO. Description29270-0000 Universal Pump, with

detachable handle andone push-fit elbow

29279-0000 Optional through deck kit29266-1000 Additional push-fit elbow

HAND DIAPHRAGM PUMP29270-0000 Universal pump, with detachable handle

and one push-fit elbow included

# 29279-0000Through Deck Kit forUniversal Pump

# 29290-1010Bilge Strainer for1-1/2" (38mm) Hose.

# 29295-1011In-Line non-return valve for4-1/4"L x 2-1/2"W x 2"H(19mm) ID Hose

ACCESSORIESfor AMAZON UNIVERSAL

KAYAK PUMP• Stainless steel piston rod for strength & durability• Comes with pump float


382-05440 544 13.5" Bilge Pump382-05450 545 21" Bilge Pump382-05480 548 34" Bilge Pump

722

ACCUMULATOR TANKS


1/2" Snap-in BarbedHose Fittings

1/2" Threaded (QEST)Hose Fittings

Note: Pressure switch canbe mounted on tankBladder Accumulator Tank

MINI-ACCUMULATOR TANKImproves all pressure controlled water systems. Our new compact 21 oz (0.6 Liter) accumulator tank fits into those tight areas,and performs all of the same functions as our 1 Quart model (1 Liter), but in a smaller package.• Smoother flow, quieter water systems• Internal rubber membrane eliminates maintenance and allows universal mounting• Better control of hot water temperatures• Simply fitted to new or existing systems• Longer pump life, lower battery drain• Snap-in port fittings

Specifications:Size: 21 oz. (0.6 liter) 4-3/8" deep x 4-3/4" wide x 7" high (11cm x 12cm x 18cm)Weight: 21 oz. (0.6 liter) 1lb (0.45 kg)Fitting: Connections for 1/2" (13mm) ID hose,

PRESSURIZED LARGE ACCUMULATOR TANKThe Jabsco pneumatic accumulator tank will smooth flow from faucets and showers, reducing pump cycling andeliminatingpulsations and water hammer. Water is totally separated from air chamber by a diaphragm and polypropylene tank liner.Volume of tank is 2 gallons with a working water volume of about 1 gallon.

• Will smooth flow from faucets and shower, reducing pump cycling and eliminating pulsations and water hammer• Water is totally separated from air chamber and metal tank by a bladder and polypropylene tank liner• Mounts horizontally, vertically, or upside down• Includes brackets and band clamps• Pre-pressurised to 20 psi (1.4 bar)• Tank may be fine-tuned to cut-in pressure of pump• 2 gallon tank• 100 psi (6.9 bar) maximum working pressure• Connection for 3/4" NPT male thread

Diameter: 8" (200mm)Height: 12-5/8" (320mm)ORDER NO. 18810-0000

PRESSURIZED ACCUMULATOR TANKA more compact pneumatic bladder to fit smaller systems and spaces

• Internal bladder• Smoother and more even flow• Quieter water system• Better temperature control• Long pump life• Lower battery drain• Simply fitted to new or existing systems• Compact size• Snap-in port fittings include both: 1/2" barbed hose fittings and 1/2" threaded hose fittings• Tank: hygienic, light, compact, impact and pressure resistant plastic construction

Diameter: 4-3/4" (119mm)Height: 13-1/4" (337m

ORDER NO. Description

30573-0003 Mini Accumulator Tank, 21 oz. (0.6 Liter)

30649-1000 Snap-in port fittings for 1/2" female threads

ORDER NO. Description

30573-0000 1 quart (1 litre) Accumulator Tank

30649-1000 Snap-in port fittings for 1/2" female threads

723


621-04990 0499DPOCHR Water Inlet Fitting

621-04999 0499DP099A Spare Plug with Chain


621-05040 0504DPOCHR Water Inlet Fitting

621-05041 0504DP099A Spare Plug with Chain

For more information see: www.perko.com



WATER INLET FITTINGChrome Plated Bronze with Standard Female Swivel Hose Connector.Complete with Black Polymer Watertight Plug and Stainless SteelBead Chain. For Obtaining Water Under Pressure At Dockside.Pipe Size: 1/2" / Flange O.D.: 2-3/4" / Screw Size: # 8

WATER OUTLET FITTINGChrome Plated Bronze with StandardMale Hose Connector. Complete with Watertight Black Polymer Cap andStainless Steel Bead Chain. For Use with On-Board Washdown Systems.Pipe Size: 1/2" / Flange O.D.: 2-3/4" / Screw Size: # 8

ORDER NO. Description32601-0092 12 Volt dc model, fuse 10 amp18912-3050 Diaphragm kit

Ideal self-priming pump for cleaning boats, for general use, or use as a showerpump. Threaded male inlet and outlet for standard garden hose attachment.For 12-volt D.C. systems.Pumps 4 gallons per minute. Produces up to 8.5 PSI Pressure.Corrosion-resistant ABS housing and impeller with heavy-duty 8 amp motor.Note : Do not run dry.

ORDER NO. 101-11574Mfr. No. 11574-4


50880-1000 50880-1000 12 Volt DC, Fuse 10 Amp

50880-1100 50880-1100 24 Volt DC, Fuse 5 Amp

Robust diaphragm pump suitable for shower and sink drain applications with a multi-positional pump head.• 4.2 gpm (16 lpm) open flow output at 3ft (1m) head• Self-priming up to 10ft (3m) vertical lift allows mounting above wet bilges• Flexible Installation• Compact and simple design• Filter-less• Quiet running• Capable of extensive dry running• Corrosion resistant parts• Complies with USCG 183.410 and ISO 8846 MARINE (Ignition protection)• ISO 8849 MARINE (Bilge Pump Standard)

Specifications:Fitting: Connections for 3/4" (19mm)ID Hose Size:11.7"(29.7cm) longx 5.9" (15cm) widex 4.4" (11.1cm) highWeight: 6lb (2.7kg)

SELF-PRIMING WASHDOWN PUMP

SHOWER DRAIN PUMP/ BILGE PUMP

PAR-MAX 3 SHOWER DRAIN PUMPNew generation, long life fully serviceable shower drain pump.• 3.5 gpm (13.2 lpm) at 3ft (1m) head.• Self-priming up to 10ft (3m) allows mounting above wet bilges.• Diaphragm design allows extended dry running.• Continuous rated, heavy duty motor with waterproof coating forharsh bilge environments.• Thermal overload protection automatically stops the motor if it overheatsdue to overloading, with auto re-start feature.• Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection).• ISO 8849 MARINE (Bilge Pump Standard).• Complete with Pumpgard.• Oil resistant elastomers.Fitting: Connections for 3/4"(19mm ) ID hose.Size: 7.7" long x 4.2" wide x 4.1" high (19.6cm x 10.6cm x 10cm).Weight: 5.0 lb (2.1kg).

SHOWER DRAIN PUMP/WATER INLET & OUTLET

724

SHOWER SUMP PUMP SYSTEMSLarger Capacity, Improved PerformanceMultiple inlets can be hooked up to more than one drain – Using different hose sizesAttwood’s two new shower sump systems deliver the performance you’ve been asking for:• Choice of sizes and output performance• Fast water flow into and out of sump• The lid snaps in to allow quick installation and removal for cleaning• The new lid includes a gasket to seal the sump box against overflow.Even includes an air vent to prevent air locks.

• Inlets are routed directly into the sump box instead of through a shared manifold, providing lessrestrictive water flow. Water is pumped out of the sump box by Attwood’s proven Sahara pumpwith self-contained, super reliable, mercury free, float switch.

• Produces faster draining with less clogging and less-frequent cycling resulting in lower power drainage• Installation is simple.

It all adds up - Attwood’s new shower sump provides reliable performance,larger capacity, simpler installation and maintenance.



For more information see: attwoodmarine.com

MULTIPLE PORT SHOWER SUMP WITH ULTIMA SWITCHMercury Free with no moving partsThis compact shower sump pump system is designed to meet the higher demands from today’s boating industry where more equipment is used.This also includes the fresh water systems onboard and involves shower, dish-washing machines, galley sinks, etc. The shower sump turnson/off automatically using the Ultima switch technology and has multiple inlet ports for handling waste water from more than one tapping point.Equipped with a check valve on the outlet which stops water flowing back into the tank. The tank has a tight-fitting lid to minimize splashing &odours. To further aid in cleaning, the system includes an easily removable mesh filter.

• Capacity: 972 GPH Straight (13.6 V): 61 l/min• Capacity: 1.0m head (13.6 V): 844 GPH / 53 L/min• Voltage: 12 V• Amperage: 3.4 A / 2 A• Fuse Size: 5 A / 3 A• Intake Hose: 1 x 3/4”, 1 x 3/4” or 1 x 1”, 1 x 1-1/8”

or 1 x 1-1/2”• Discharge Hose: 3/4”• Dimensions: 11.5” L X 8.26” W X 5.7” H• Weight: 2.3 lbs.

Standard Capacity, 500GPH

Large Capacity, 750GPH

SHOWER DRAIN SYSTEM12 VoltA compact, full capacity shower drain system. Automatically turns on after thewater starts, and shuts off when the water is removed.Activated by a Mercury-Free Rule-A-Matic® Plus™ Float Switch. Other featuresinclude a clear screw down cover, a removable strainer for easy cleaning, andan internal check valve to prevent back flow.

ORDER NO. Mfr. No. Description Flow Rate Discharge Inlet Ports SizeL x W x H

272-00098-1 98A Multi-Port Inlet Pump 800 GPH 3/4” 3/4”, 1”, 1-1/8”, 1-1/2” 8-1/4” x 11-1/4” x 5-1/2”

ORDER NO. Mfr. No. ModelNo.

RatedVoltage

FuseSize

OutletHose Size

AmpDraw Box Size

104-41410 4141-4 500 GPH 12-volt 3 amps 3/4" I.D. 1.4 4-1/2"H x 8-1/8"W x 10-1/2"L

104-41430 4143-4 700 GPH 12-volt 5 amps 3/4" I.D. 2.5 4-7/16"H x 7-23/64"W x 13"L

Mfr. No.57151ORDER NO. 847-57151

SHOWER SUMP PUMP/SHOWER DRAIN

Mercury free

Mercury free

725

ORDER NO. Mfr. No. Description668-43710 43710 Showerhead only, Chrome668-43711 43711 Showerhead only, White668-43713 43713 Showerhead Kit, Chrome668-43714 43714 Showerhead Kit, White668-43716 43716 Shower Flex Hose, Chrome668-43717 43717 Shower Flex Hose, White668-43718 43718 Showerhead Mount, Two-Position, Chrome668-43719 43719 Showerhead Mount, Adjustable, Chrome

For more information see: www.camco.net

TASTEPURE™ FRESH WATER HOSES• Super heavy duty hoses are reinforced for maximum kink resistance• Drinking water safe•Made of FDA approved materials

ORDER NO. Mfr. No. Description668-22783 22783 Fresh Water Hose, 5/8" ID., 25 Feet668-22793 22793 Fresh Water Hose, 5/8" ID., 50 Feet668-22803 22803 Fresh Water Hose, 5/8" ID., 75 Feet

MARINE SHOWERHEADEnjoy longer showers with this ergonomically designed, handheld showerhead. Convenient on/offswitch allows you to pause the flow of water while shampooing, greatly reducing the amountwater used. No more rushing through your shower to conserve water. Multi-featured showerheadallows you a choice of four spray patterns. From a drenching rain to a gentle massage, you canpersonalize your shower with your favorite comfort settings.

• Heavy-duty construction for years of use

• Produces 2.5 GPM with 40psi or 1.7GPM with 25psi at the water source

MARINE SHOWERHEAD KITKit includes:Showerhead, 60" shower flex hose, washers, wall mount and hardware.

CHROME SHOWER HEAD MOUNTSAdjustable wall mount gives you great flexibility in positioning your showerhead.Two-position wall mount gives you a choice of two angles for your showerhead.Hardware included.

POP-A-TOOTHBRUSH™Protect and store toothbrushes with easily-installed holder that guards against dust andgerms. Cover opens automatically whentoothbrush is pulled forward. Vented forquick drying. Double-sided tape allows forpermanent mounting.

Mfr. No. 57203ORDER NO. 668-57203

Mfr. No. 43719Mfr. No. 43718

SHOWER ACCESSORIES

MARINE SHOWER FLEX HOSEShower flex hose features a reinforced construction that eliminates hose kinking. Flexible 60"replacement hose with built-in connectors for easy installation to a standard 1/2" shower arm.Washers included.

Convenient

ON/OFF

Switch

726

IN-LINE SUBMERSIBLE/GENERAL PURPOSE PUMPS


For more information see www.xylemflowcontrol.com

Centrifugal Pumping Power!...for water and diesel applications

• 200 GPH to 500 GPH models availableFor continuous and intermittent duty

• Easy conversion for in-line pumpingapplications. Strainer removes for hoseattachment to inlet nozzle

• Pumping up to 32 feet of headUp to 14 psi for washdown applications

• Kits include hose, battery clips and adjustablespray nozzle

• Fully submersible heavy duty construction• 12 Volt DC

IN-LINE SUBMERSIBLE 12 VOLT PUMPSTHE NEW “RULE” HIGH CAPACITY SLIMLINE PUMPS - MARINE/UTILITY

• Easy pump-out in tight bilge areas• Water Transfer• General wash-down• Baitwell aeration• Rapid diesel refueling and transfer• Deck showers• Dinghy pump-out• Sink draining

ORDER NO. Mfr. No. Flow Rate Amps Liquid OutletHose

MaxTemp.

272-05003 iL500P 500 GPH 6 amp Water/Diesel 3/4” 176º F

272-05004 iL500PK 500 GPH Kit 6 amp Water/Diesel 3/4” 176º F

272-02803 iL280P 280 GPH 4.5 amp Water/Diesel 1/2” 176º F

272-02804 iL280PK 280 GPH Kit 4.5 amp Water/Diesel 1/2” 176º F

272-02001 iL200 200 GPH 2.80 amp Water only 3/8” -1/2” 140º F

272-02003 iL200P 200 GPH 4.5 amp Water/Diesel 1/2” 176º F

272-02002 iL200K 200 GPH Kit 2.8 amp Water only 3/8” -1/2” 140º F

Model iL200KModel iL500Plus Model iL500PK

WAKEBOARD AND SKI BOAT BALLAST PUMPDesigned to pump water into Wakeboard Liquid Ballast Tanks andwhen reversed will also pump water out of them.• Fills a typical 40 gallon ballast tank in under 5 minutes• Reversible to both fill and empty ballast tanks• Self-priming and non air-locking• Exclusive (Patent pending) Run-dry Protection shuts off pump before impeller is damaged• Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection)• Replacement impeller ORDER NO. 06303-0007-P

Fittings: Ports - 1/2" (13mm) NPT internal thread and 1" (25mm) External Hose BarbSize: 7-1/8" (18cm)L x 4-3/4" (12cm)W x 3-5/8" (9 cm)HWeight: 6 Ibs. (2.7 kg)

ORDER NO. 18220-1127


The RainPerfect™ pump has many convenient features:• Provides pressurized pumping through a garden hose (13 PSI)• Runs on a solar rechargeable (NiMH) battery for operation anytime, day or night• Connects to all standard garden hoses• Easy operation and installation• Adaptable to most style rain barrels• Pumps up to 100 gallons (378 liters) of water on a single charge• Maximum Pressure: 13 psi• Dimensions:12.625L x 6.25"W x 21"HRainPerfect™ Pump System Includes:

• Control Box with NiMH Rechargeable Battery• Intake Hose• Submersible Pump• Solar Panel and Ground Stake

RAINPERFECT™ - SOLAR POWERED RAIN BARREL PUMP SYSTEMThe RainPerfect™ pump and solar panel install easily and provide plenty of pressure to run water through a garden hose.The pump provides enough pressure to run most low pressure sprinklers, wash a car or water just about anything around your home.A convenient solar panel captures natural energy from the sun eliminating the need for electrical power to charge the battery.This makes the RainPerfect™ pump ready to go anywhere, anytime and involves no additional utility cost for you.

RECHARGEABLE PORTABLE UTILITY PUMP - FULLY SUBMERSIBLE PUMPThe AquaCharge™ pump has many convenient features:• Rechargeable battery (charger included!)• Connects to the included 8' hose or any standard garden hose• Easy operation• Pumps up to 200 gallons (756 liters) of water on a single charge• Charging Time: Approximately 12 hours• Volts: 9.6 volt• Port Size Outlet: Standard Garden Hose• Dimensions: 9.375" x 4.625" x 12.625"

AquaCharge™ Pump System Includes:• Submersible Pump & 8' Hose• Battery & Charging Station

Features Include:• Impact resistant strainer protects against debris and jamming• Integrated on/off switch in supplied 25 ft. cabling, providing operationalconvenience away from the power source• Harsh environmental DC motor technology, proven in over 15 million operational units• Direct operation from a 12 volt vehicle battery, providing flexibility in location and use• Extended dry run time capability, preventing pump damage due to inconsistent water flow• Thermal overload protection for each motor in the event of a debris jam• Port Size Inlet/Outlet: 3"• Amp Draw: 30 amps (approx.)• Protection: Thermal Cut Off (TCO) for each motor• Dimensions: (13.5"L x 12"W x 8.5"H)• Weight: 1.1 Ib.

EVACUATOR 8000 - HIGH CAPACITY DEWATERING PUMP12 VDC - 8000 GPHThe Evacuator 8000 represents the largest entrant in the upcoming Evacuator line of high efficiency portable utility pumps. Providinga sizeable 8000 GPH flow rate, the EV8000 represents the highest flow rate offering in the Evacuator product series. Designed as analternative to gas or diesel powered portable pumps, the EV8000 excels in work environments requiring fast, efficient removal oflarge concentrations of standing or flooding water. Similar to the other Evacuator pumps, the EVA8000 benefits from the sameinnovative power connection which allows for direct operation from your vehicle’s 12 volt battery, via two heavy duty battery clips.

ORDER NO. Mfr. No.272-80000 EV8000100

ORDER NO. Mfr. No.777-500102 AQ500-102

ORDER NO. Mfr. No.777-280100 RB280-100

UTILITY PUMPS

728For more information see; www.johnson-pump.com

For more information see; www.xylemflowcontrol.com

GPM* VOLTAGE MOTOR PORTS DIMENSIONS Ins. (mm)ORDER NO. L/min** VAC HP DUTY CYCLE INT. EXT. IMPELLER*** HEIGHT WIDTH LENGTH12290-0001 5.8 (22) 115 1/6 Continuous — 5/8"O.D. Hose 07273-0001-P (N) 7-3/4"(169) 5-3/4"(147) 9-5/16"(237)12310-0001 3.4 (12,8) 115 1/12 Intermittent 3/8" IPT 3/4" GHT 14750-0001 (N) 3-1/2"(89) 5”(127) 6-7/8"(174)12310-0003 3.4 (12,8) 115 1/12 Intermittent 3/8" IPT 3/4" GHT 14750-0003-P (OR)

PLASTIC AC MOTOR PUMP UNITSJabsco plastic AC motor pump units offer the same versatility with most of thefeatures of the Jabsco bronze motor pump units.12310-Series has the combination 3/8" IPT and 3/4" garden hose port connections.

PLASTIC DC MOTOR PUMP UNITSJabsco plastic DC motor pump units offer an alternative to the bronze motorpump units with many of the same features.They are also self-priming so they may be remotely mounted.The larger Water Puppy size pump is equipped with 5/8'' hose barbed ports.

GPM* VOLT AMP FUSE PORTS DIMENSIONS Ins. (mm)ORDER NO. L/MIN** DC DRAW SIZE SEAL INT. EXT. IMPELLER*** HEIGHT WIDTH LENGTH12560-0001 3.7 (14) 12 7 10A Liptype — 5/8"I.D.Hose 06303-0001-P 3-1/4"(83) 5"(127) 6-1/2"(165)

*GPM flow at 10 feet head.**L/min. at 3m head.***To order oil resistant impellers separately, use above impeller numbers with 0003 suffix instead of 0001 as listed.

*GPM flow at 10 feet head.**L/min. at 3m head.***To order oil resistant impellers separately, use above impeller numbers with 0003 suffix instead of 0001 as listed.

12310-Series

12560-0001

ULTRA BALLAST PUMP - SKI-WAKEBOARD12V - CAPACITY 52 L/MINDesigned to quickly fill or, when reversed, drain a ballast tank at a rate of more than 45 I/min (12 GPM).Capable of pumping fresh or sea water the pump’s robust design can handle the rigors of continuous duty usage,is reversible, and has a built in thermal overload for added protection. Care not to run dry for extended periods of timewill increase the pump longevity and ensure reliable performance for many years. Note: Only for waterhandling.

F4B-11ORDER NO. 102-469003 Replacement Impeller: 671-00023 Mfr No. 09-824P-1Mfr. No. 10-24690-03Pump Model Mfr. No. Pump Body Impeller Seal Connection Length Width HeightF4B-11 10-24690-03 Bronze 671-00023 Lip Seal Hose 1" / 1/2"NPT 202mm / 8" 120 mm / 4.72" 90 mm / 3.54"

CLUTCH PUMPSAUTOMATICALLY CONTROLLED CLUTCH PUMPSWith an electro-magnetic clutch you will have pumping power wheneverneeded, at a push of a button, without being at the pump. Combined with avacuum switch (recommended for bilge pump application), the clutch willautomatically disengage whenever the pump starts priming air, therebypreventing dry running and pump damage.

HEAVY DUTY ELECTRO-MAGNETIC CLUTCH PUMPS12 VOLTORDER NO. Pump Model Mfr. No. Impeller/Service Kit Connection Length Width Height102-4577981 F7B-50017 10-24577-98-1 671-00005 / 671-10017 1"NPT 156 mm / 6.14" 120 mm / 4.72" 93 mm / 3.66"101-3022981 F8B-50017 10-13022-98-1 671-00017 / 671-10016 1-1/2" NPT 225 mm / 8.85" 160 mm / 6.29" 124 mm / 4.88"101-3022951 F8B-50017 10-13022-95-1 671-00017 / 671-10016 1-1/4" NPT 225 mm / 8.85" 160 mm / 6.29" 124 mm / 4.88"101-3022961 F8B-50017 10-13022-96-1 671-00017 / 671-10016 1-1/2" NPT 225 mm / 8.85" 160 mm / 6.29" 124 mm / 4.88"

Model No. F7B-50017 Model No. F8B-50017

MISCELLANEOUS PUMPS

729

GENERAL PURPOSE PUMPS


HIGH PRESSURE - 12V DC12 Volt DC, 3/4" NPT ports, fuse size 25 amp.9" (22cm) long x 4-1/2" (11 cm) wide x 5" (12 cm) high23 lb (10.5 kg)

Mfr. No. 50860-0012ORDER NO. 50860-0012

LOW PRESSURE12 Volt DC, 3/4" NPT ports, fuse size 10 amp.6" (15cm) long x 6-1/2" (16 cm) wide x 5" (12cm) high15 lb (6.8 kg)

Mfr. No. 50840-0012ORDER NO. 50840-0012

Jabsco bronze AC motor pump units are similar to the popular Puppy pumps but are equipped with AC electric motors.They are ideal for dockside general purpose pumping and some onboard applications. With four models available offering flowsfrom 3-1/2 to 26 GPM, there is a Jabsco pump suitable for almost any de-watering, washdown or circulation application. They are self-priming and portable making them very versatile.

6050-Series12210-Series

• 29 gpm (110 lpm) maximum flow

• Low & High pressre versions available

• Robust stainless steel body and anti-cloggingdesign Impeller

• Only one tool needed for all servicing

• ISO 8846 MARINE & USCG Regulations forIgnition Protection• ISO 8849 MARINE Bilge Pump Standard

The 12210-Series pumps are the most compact of the AC motor pump units.They are capable of delivering up to 3-1/2 GPM. The motor has replaceablebrushes for extended life. However, they are not rated for continuous dutyoperation.

The 11810-Series pumps are mid-range models which deliver about 9.5 GPMrespectively. They have a replaceable wearplate to extend serviceability whenhandling abrasive fluids.

The 06050-0003 pump is the largest of the motor pump units. With a capacity of26 GPM, it is ideal for the larger de-watering or washdown applications. The motorcan be wired for either 115 volt or 230 volt operation.

CYCLONE® STAINLESS STEEL CIRCULATION PUMPS

FLEXIBLE IMPELLER AC MOTOR PUMP UNITS

Dimensions in (mm)GPM* Motor Duty Weight

ORDER NO. (L/min.)** Voltage HP Cycle Int. Ext. Impeller Height Width Length(mm) Lb (kg)

06050-0003 23 (87) 115/230 3/4 Continuous 1 NPT — 06056-0003 8-5/8" (186) 8" (203) 13" (229) 35-1/2 (16)

11810-0003 9.5 (36) 115 1/3 Continuous 1/2 NPT GHT 05929-0003 7-3/4" (197) 7-1/4" (184) 10-1/2" (267) 22 (10)

12210-0001 3.4 (12,8) 115 1/12 Intermittent 3/8 NPT GHT 01414-0001-P 3-5/8" (92) 4" (127) 6-7/8" (102) 5 (2,3)

12210-0003 3.4 (12,8) 115 1/12 Intermittent 3/8 NPT GHT 01414-0003-P 3-5/8" (92) 4" (127) 6-7/8" (102) 5 (2,3)

*GPM flow at 10 feet head. ** L/min. at 3m head

WARNING: PUMPS WITH AC MOTORS CAN SPARK. EXPLOSION AND DEATH CAN OCCUR. DO NOT USE WHERE FLAMMABLE VAPORS ARE PRESENT.

Robust, high efficiency and flow, long life circulation pumps.Typical applications include Hot & Cold water systems, windscreen washing,

livewell and bait tank systems and liquid transfer

730

GENERAL PURPOSE PUMPS


MINI PUPPY 12VUse for bilge pumping, livewell circulation, washdown and generalpumping requirements. When bilge water contains significantamounts of oil, use impeller No. 14750-0003-P. For intermittentduty, motor may be reversed.* With a wet impeller, pump willproduce a suction lift of about 4 feet (1,2m) and a lift to 15 feet(5m) when primed. BE SURE SUCTION LINES ARE AIRTIGHT.Flow Rate: 1.8 GPM (6.8 LPM)ORDER NO. 14750-0001 - Replacement Impeller

Ports: 3/8" Pipe Thread Internal Plus an adaptorfor 3/4" Garden Hose thread

Size: 3-3/8"H x 6-3/4"L x 3-3/4"WORDER NO. 08860-0001

REVERSIBLE MINI PUPPY PUMPUse for circulating and draining bait tank, engine oil changing orgeneral pumping requirements. With a wet impeller, pump will producea suction lift of about 3 to 4 feet (0.9 to 1.2m) and a lift of about 10feet (3m) when primed. BE SURE SUCTION LINES ARE AIRTIGHT.Flow Rate: 1.8 GPM (6.8 LPM)ORDER NO. 14750-0003-P - Replacement ImpellerPorts: 3/4" Garden Hose ExternalSize: 3-3/8"H x 8-5/8"L x 4"WORDER NO. 18620-0003

11810 DC PUMPIdeal for Bilge Pumping, Bait Tank, Wash Downs, and General Marine Service.Flow rate: 11 US gallons/min (42 LPM)Self-priming from dry up to 10ft.

Features:• Small bilge debris present no problem to these bronze bodied, flexible impeller pumps.• Simple design means fewer wearing parts.• Meets USCG Electrical Standards (Title 33, Chapter 1, Part 183 Subpart 1) for ignition protectionPorts: 1/2" Internal Pipe Thread and 3/4"

Garden Hose External ThreadSize: 5-5/16"H x 11-11/16"L x 4-1/2"WORDER NO. 11810-0121

WATER PUPPYHeavy duty, continuously rated waste sump pump.• 380 gph (1430 lph) output at 3m (10ft) total head.• Self-priming up to 4ft (1.2m) vertical lift.• Bilge debris presents no problem to this bronze bodied, flexible impeller pump.• Simple design means fewer wearing parts - all user serviceable.• Complies with USCG 183.410 and ISO 8846 MARINE (Ignition protection).• ISO 8849 MARINE (Bilge Pump Standard).Fitting: Connections for 1/2"NPT male threaded fittings, and for 1" (25mm) ID hose.Size: 6-3/8" long x 4-3/4" wide x 3-1/2" high (16.2cm x 12cm x 8.9cm).

ORDER NO. 18660-012112 Volt dc model, fuse 15 ampORDER NO. 06303-0001-PReplacement Impeller

COMMERCIAL DUTY WATER PUPPYHigh flow, continuously rated bilge pump offering good discharge head.• 470 gph (1770 lph) output at 10ft (3m) total head.• Self-priming up to 8ft (2.4m) vertical lift.• Bilge debris presents no problem to this bronze bodied, flexible impeller design.• Simple design means fewer wearing parts - all user serviceable.• Complies with USCG 183.410 and ISO 8846 MARINE (Ignition protection).• ISO 8849 MARINE (Bilge Pump Standard).Fitting: Connections for 1" (25mm) ID hose, or 1/2"NPT male threads. Do not use plumbing

of less than 3/4" (19 mm) internal diameter.Size: 7-1/8" long x 4-3/4" wide x 3-1/2" high (18.1cm x 12cm x 8.9cm).

ORDER NO. 18670-012312 Volt dc model, fuse 15 ampORDER NO. 06303-0003-P - Replacement Impeller

731

FLEXIBLE IMPELLER PEDESTAL PUMPS


FLEXIBLE IMPELLER PEDESTAL PUMPSFOR ENGINE COOLING & GENERAL PURPOSE PUMPING

Jabsco pedestal mount corrosion resistant bronze pumps are ideal for engine cooling,washdown, circulation and many general purpose on-board or dockside applications.The bronze or stainless steel shaft is installed with permanently lubricated ballbearings for long life and heavy duty service. Self-priming with the ability to operatein either direction at variable speeds.Capacities range from 3 GPM (11 LPM) to 83 GPM (314 LPM) with various portconfigurations and sizes. Most models have replaceable cams and wearplates forextended product life. Removable end cover for easy impeller service. The standardimpeller for these pump models is neoprene with some having alternative oil resistantnitrile impeller available.*

Capacities shown are at 1750 RPM, 10 ft (3m) head.Impellers listed for service reference only.3.7 GPM (14 LPM); 1/4" NPT port connections;

3/8" (9.7mm) dia. shaft; full cam and lip seal.

Pump02760-0001*

Impeller04528-0001-P

5.8 GPM (22 LPM);3/8" NPT port connections;1/2" (12,7mm) dia. shaft; full cam and lip seal.


11.3 GPM (42,8 LPM);1/2" NPT port connections;5/8" (16 mm) dia. shaft; full cam and lip seal.

Pump01673-1001*


CRUSADER - TYPEThe Jabsco Crusader type pumpis a direct replacement for thestock Crusader (ThermoElectron) pump no. 97179 and(Sherwood No. E-35) soldthrough Crusader dealers. It fitsmost pre-1993 Crusader enginemodels, accepts the Crusaderdrive pulley and bolts directly tothe stock mounting bracket. Ithas a replaceable wearplate andthe seal can generally be replacedwithout even removing the pumpshaft. The impeller will fit eitherthe stock Crusader pump or theupgraded Jabsco model.

ORDER NO. 42730-00001" NPT internal port connection

23 GPM (87 LPM); 1" NPT(F) portconnections; 5/8" (16 mm) dia.shaft; mechanical face seal.Brass cam and impeller insert.

MERCRUISER - TYPEThe Jabsco Mercruiser type replacement pump has a one piece bronze body andbronze end-plate and cast iron composite pump (Quicksilver model No. 46-72774-A32)supplied as original equipment. It has a replaceable cam and wearplate so it can betotally overhauled. The long-life Jabsco impeller fits both the stock MerCruiser pumpand Jabsco aftermarket pump and is supplied with the gaskets needed to complete theimpeller replacement.

ORDER NO. 43210-00011-1/4" Hose barb connection

Pump00777-9001*


62 GPM (235 LPM); 1-1/4" NPTport connections; 1" (25,4mm) dia.shaft; face seal. Brass cam andimpeller insert.

Pump06400-0004


*These models may be ordered equipped with nitrile impellers by inserting a 3 in the last digit of the model number in place of the 1.

Pump02620-1101*

G HF

I

DCBA

K L

M CC


IMPELLERS shown are actual size See Pages 736-739 for Conversion

IMPELLER IDENTIFICATION GUIDE

732



IMPELLERS shown are actual sizeSee Pages 736-739 for Conversion

733



R

U

X

W

IMPELLERS shown are actual size See Pages 736-739 for Conversion

735

IMPELLER CHART NUMERICAL CROSS REFERENCE


1 SLOTTED SHAFTPIN DRIVE

2 THROUGH HOLEPIN DRIVE

3 KEY DRIVE

4 SINGLEFLAT DRIVE

5 DOUBLEFLAT DRIVE

6 DING DRIVEKEYWAY

7 SPLINEDRIVE

8 RIBBED SEGMENTKEY

TYPES OF INSERT AND SHAFT DRIVE

IMPELLER NO. SILHOUETTE

00653-0001-P G00673-0001-P G00836-0001-P O00836-0003-P O00836-0008-P O00920-0001-P M00920-0003-P M00920-0008B M01210-0001-P �K01210-0003-P K01414-0001-P �A01414-0003-P A02999-0001B U03085-0001-P L04527-0003B G04528-0001-P D04528-0003-P D04568-0001-P K04568-0003-P K04598-0001-P M04598-0003-P M05616-0001-P G05929-0001-P K05929-0003-P K


06056-0003-P M06303-0001-P H06303-0003-P H06303-0007-P H06760-0001B O06760-0003-P O07273-0001-P G07273-0003-P G09200-0003B F09200-0011B F09200-0021B F09200-0023-P F11979-0001-P M12104-0001B A13554-0001-P K14281-0001-P K14609-0001B C14609-0003 C14750-0001B B14750-0003-P B14787-0001B C17018-0001-P M17240-0001B R17255-0003-P D


17370-0001-P Q17935-0001-P Q17936-0001-P Q17937-0001-P Y17937-0003-P Y17938-0001-P Q17954-0001-P Y17956-0001--P Y18327-0001-P Y18653-0001-P I18673-0001-P I18673-0003-P I18777-0001-P HH18786-0001B R18789-0001 R18838-0001-P W18948-0001-P X18958-0001-P GG21414-0001-P A22120-Series K22405-0001-P D22799-0001-P G30919-0001 Z31130-0061-P CC

736

For more information see:www.xylemflowcontrol.com


ImpellerMaterial Drive

TypeNumberof Blades

DimensionsInsertMaterialDiameter Width Shaft Diameter

Type ORDER NO. Inches mm Inches mm Inches mm

A

01414-0001-P Neoprene 4 6 1-1/4 32 15/32 12 5/16 8 Brass*01414-0003-P Nitrile 4 6 1-1/4 32 15/32 12 5/16 8 Brass*12104-0001B Neoprene 2 6 1-1/4 32 15/32 12 5/16 8 Brass

21414-0001-P Neoprene 4 6 1-1/4 32 15/32 12 5/16 8 Brass

(For use with Yanmar 1GM10 Marine Engines)

B14750-0001B Neoprene 4 8 1-1/4 32 15/32 12 5/16 8 Brass*14750-0003-P Nitrile 4 8 1-1/4 32 15/32 12 5/16 8 Brass*

C

14609-0001B Neoprene 4 6 1-1/4 32 15/32 12 5/16 8 Brass*14609-0003 Neoprene 4 6 1-1/4 32 15/32 12 5/16 8 Brass*14787-0001B Neoprene 4 6 1-1/4 32 15/32 12 5/16 8 Plastic*

CC 31130-0061-P Neoprene 7 10 2-19/32 66 2-11/16 68 5/8 16 Brass�

D

04528-0001-P Neoprene 1 or 2 6 1-9/16 40 3/4 19 3/8 9.5 Brass

04528-0003-P Nitrile 1 or 2 6 1-9/16 40 3/4 19 3/8 9.5 Brass

17255-0003-P Nitrile - 6 1-9/16 40 3/4 19 1/4 6.4 None†

22405-0001-P Neoprene 1 6 1-9/16 40 3/4 19 15/32 12 Brass

F

09200-0011B Neoprene 4 10 1-9/16 40.5 3/4 19 5/16 8 Plastic*09200-0003B Nitrile 4 10 1-19/32 40.5 3/4 19 5/16 8 Plastic*09200-0021B Neoprene 4 10 1-19/32 40.5 3/4 19 5/16 8 Brass

09200-0023-P Nitrile 4 10 1-19/32 40.5 3/4 19 5/16 8 Brass

G

00653-0001-P Neoprene 1 6 2 51 7/8 22 15/32 12 Brass

00673-0001-P Neoprene 1 or 2 6 2 51 7/8 22 1/2 12.7 Brass

(673-Series Impellers may be replaced with the newer 18673-Series - See Impeller Type I)

04527-0003B Nitrile 2 6 2 51 7/8 22 5/16 8 None

05616-0001-P Neoprene 6 6 2 51 7/8 22 1/2 12.7 Brass

07273-0001-P Neoprene 4 6 2 51 7/8 22 5/16 8 Plastic

07273-0003-P Nitrile 4 6 2 51 7/8 22 5/16 8 Plastic

22799-0001-P Neoprene 3 6 2 51 7/8 22 1/2 12.7 Brass

GG 18958-0001-P Neoprene 3 12 3-1/4 82.5 2-57/64 73.4 25/32 21 Brass

H

06303-0001-P Neoprene 4 6 2 51 7/8 22 5/16 8 Plastic

06303-0003-P Nitrile 4 6 2 51 7/8 22 5/16 8 Plastic

06303-0007-P Urethane 4 6 2 51 7/8 22 5/16 8 Plastic

HH 18777-0001-P Neoprene 7 10 2-1/4 57 2 51 5/8 16 Brass

I

18653-0001-P Neoprene 1 10 2 51 7/8 22 5/32 12 Brass

18673-0001-P Neoprene 1 or 2 10 2 51 7/8 22 1/2 12.7 Brass

18673-0003-P Nitrile 1 or 2 10 2 51 7/8 22 1/2 12.7 Brass* Insert material was different **Extended Drive sleeves† Impeller molded on shaft †† Sherwood Replacement Impeller�For low temperature to 27˚F (120˚F (max)) � Mercruiser replacement

SELECTION TABLE BY PROFILE

737


ImpellerMaterial Drive

TypeNumberof Blades

Dimensions InsertMaterialDiameter Width Shaft Diameter

Type ORDER NO. Inches mm Inches mm Inches mm

K

01210-0001-P Neoprene 7 12 2-1/4 57 1-1/4 31.5 5/8 16 Brass

01210-0003-P Nitrile 7 12 2-1/4 57 1-1/4 31.5 5/8 16 Brass

04568-0001-P Neoprene 3 12 2-1/4 57 1-1/4 31.5 5/8 16 Brass

04568-0003-P Nitrile 3 12 2-1/4 57 1-1/4 31.5 5/8 16 Brass

05929-0001-P Neoprene 6 12 2-1/4 57 1-1/4 31.5 1/2 12.7 Brass

05929-0003-P Nitrile 6 12 2-1/4 57 1-1/4 31.5 1/2 12.7 Brass

13554-0001-P Neoprene 7 12 2-1/4 57 1-29/32 48.4 5/8 16 Brass

14281-0001-P Neoprene 5 12 2-1/4 57 1-1/4 31.5 5/8 16 Plastic

22120-Series Neoprene 7 12 2-1/4 57 2 51 5/8 16 Brass

(22120-Series Impellers may be replaced with the newer 18777-Series - See Impeller Type HH)

L 03085-0001-P Neoprene 7 10 2-1/4 57 1-1/4 31.5 1/2 12.7 Brass

M

00920-0001-P Neoprene 7 8 2-9/16 65 2 51 5/8 16 Brass

00920-0003-P Nitrile 7 8 2-9/16 65 2 51 5/8 16 Brass

00920-0008B Natural ubber 7 8 2-9/16 65 2 51 5/8 16 Brass�

04598-0001-P Neoprene 3 8 2-9/16 65 2 51 5/8 16 Brass

04598-0003-P Nitrile 3 8 2-9/16 65 2 51 5/8 16 Brass**06056-0003-P Nitrile 6 8 2-9/16 65 2 51 5/8 16 Brass**11979-0001-P Neoprene 7 8 2-9/16 65 1-7/16 36.5 5/8 16 Brass

17018-0001-P Neoprene 7 8 2-9/16 65 3 76.2 5/8 16 Brass

O

00836-0001-P Neoprene 7 9 3-3/4 95 2-1/2 63 1 25.4 Brass

00836-0003-P Nitrile 7 9 3-3/4 95 2-1/2 63 1 25.4 Brass

00836-0008-P Natural Rubber 7 9 3-3/4 95 2-1/2 63 1 25.4 Brass�

06760-0001B Neoprene 7 9 3-3/4 95 3-1/2 88.9 1 25.4 Brass

06760-0003-P Nitrile 7 9 3-3/4 95 3-1/2 88.9 1 25.4 Brass

Q

17370-0001-P Neoprene 5 12 3-3/4 95 3-1/2 88.9 1 25.4 Plastic

17935-0001-P Neoprene 7 12 3-3/4 95 2-1/2 63 1 25.4 Brass

17936-0001-P Neoprene 7 12 3-3/4 95 3-1/2 88.9 1 25.4 Brass

17938-0001-P Neoprene 7 12 3-3/4 95 3-3/4 95 1 25.4 Brass

R

17240-0001B Neoprene 7 9 4-5/8 118 3-1/2 88.9 1 25.4 Brass

18786-0001B Neoprene 5 9 4-5/8 118 3-1/2 88.9 1 25.4 Plastic

18789-0001 Neoprene 7 9 4-5/8 118 3-1/2 88.9 1 25.4 Brass

U 02999-0001B Neoprene 7 13 5 127 4 101.6 1-1/2 38 Brass

W 18838-0001-P Neoprene 3 12 2-7/16 62 1-1/4 31.5 5/8 16 Brass††X 18948-0001-P Neoprene 3 12 2-9/16 65 1-5/8 41.4 5/8 16 Brass††

Y

17937-0001-P Neoprene 7 10 2-9/16 65 2 51 5/8 16 Brass

17937-0003-P Nitrile 7 10 2-9/16 65 2 51 5/8 16 Brass

17954-0001-P Neoprene 4 10 2-9/16 65 2 51 5/8 19 Brass�

17956-0001--P Neoprene 6 10 2-9/16 65 2 51 5/8 16 Brass

18327-0001-P Neoprene 3 10 2-9/16 65 2 51 5/8 16 Brass††

Z 30919-0001 Neoprene 5 12 3-1/16 77 3 76.2 13/16 20 Brass* Insert material was different **Extended Drive sleeves† Impeller molded on shaft †† Sherwood Replacement Impeller�For low temperature to 27˚F (120˚F (max)) � Mercruiser replacement

SELECTION TABLE BY PROFILE



Number ofBlades

DimensionsDriveType

Shaft DimensionsMaterial Insert

Material

ImpellerDiameter Diameter Width

Inches mm Inches mm Inches mm ORDER NO. Type

6

1-1/4 32 4 15/32 12 5/16 8 Neoprene Brass* 01414-0001-P A1-1/4 32 4 15/32 12 5/16 8 Nitrile Brass* 01414-0003-P A1-1/4 32 2 15/32 12 5/16 8 Neoprene Brass 12104-0001B A1-1/4 32 4 15/32 12 5/16 8 Neoprene Brass 21414-0001-P A1-1/4 32 4 15/32 12 5/16 8 Neoprene Brass* 14609-0001B C1-1/4 32 4 15/32 12 5/16 8 Neoprene Brass* 14609-0003 C1-1/4 32 4 15/32 12 5/16 8 Neoprene Plastic* 14787-0001B C1-9/16 40 1 or 2 3/4 19 3/8 9.5 Neoprene Brass 04528-0001-P D1-9/16 40 1 or 2 3/4 19 3/8 9.5 Nitrile Brass 04528-0003-P D1-9/16 40 - 3/4 19 1/4 6.4 Nitrile None† 17255-0003-P D1-9/16 40 1 3/4 19 15/32 12 Neoprene Brass 22405-0001-P D2 51 1 7/8 22 15/32 12 Neoprene Brass 00653-0001-P G2 51 1 or 2 7/8 22 1/2 12.7 Neoprene Brass 00673-0001-P G2 51 2 7/8 22 5/16 8 Nitrile None 04527-0003B G2 51 6 7/8 22 1/2 12.7 Neoprene Brass 05616-0001-P G2 51 4 7/8 22 5/16 8 Neoprene Plastic 07273-0001-P G2 51 4 7/8 22 5/16 8 Nitrile Plastic 07273-0003-P G2 51 3 7/8 22 1/2 12.7 Neoprene Brass 22799-0001-P G2 51 4 7/8 22 5/16 8 Neoprene Plastic 06303-0001-P H2 51 6 7/8 22 5/16 8 Nitrile Plastic 06303-0003-P H

8

1-1/4 32 4 15/32 12 5/16 8 Neoprene Brass* 14750-0001B B1-1/4 32 4 15/32 12 5/16 8 Nitrile Brass* 14750-0003-P B2-9/16 65 7 2 51 5/8 16 Neoprene Brass 00920-0001-P M2-9/16 65 7 2 51 5/8 16 Nitrile Brass 00920-0003-P M2-9/16 65 7 2 51 5/8 16 Natural Rubber Brass� 00920-0008B M2-9/16 65 3 2 51 5/8 16 Neoprene Brass 04598-0001-P M2-9/16 65 3 2 51 5/8 16 Nitrile Brass** 04598-0003-P M2-9/16 65 6 2 51 5/8 16 Nitrile Brass** 06056-0003-P M2-9/16 65 7 1-7/16 36.5 5/8 16 Neoprene Brass 11979-0001-P M2-9/16 65 7 3 76.2 5/8 16 Neoprene Brass 17018-0001-P M

9

3-3/4 95 7 2-1/2 63 1 25.4 Neoprene Brass 00836-0001-P O3-3/4 95 7 2-1/2 63 1 25.4 Nitrile Brass 00836-0003-P O3-3/4 95 7 2-1/2 63 1 25.4 Natural Rubber Brass� 00836-0008-P O3-3/4 95 7 3-1/12 88.9 1 25.4 Neoprene Brass 06760-0001B O3-3/4 95 7 3-1/12 88.9 1 25.4 Nitrile Brass 06760-0003-P O4-5/8 118 7 3-1/12 88.9 1 25.4 Neoprene Brass 17240-0001B R4-5/8 118 5 3-1/12 88.9 1 25.4 Neoprene Plastic 18786-0001B R4-5/8 118 7 3-1/12 88.9 1 25.4 Neoprene Brass 18789-0001 R

SELECTION TABLE BY DIMENSIONS

* Insert material was different **Extended Drive sleeves† Impeller molded on shaft †† Sherwood Replacement Impeller�For low temperature to 27˚F (120˚F (max)) � Mercruiser replacement

739


Number ofBlades

DimensionsDriveType

Shaft DimensionsMaterial Insert

Material

ImpellerDiameter Diameter Width

Inches mm Inches mm Inches mm ORDER NO. Type

10

2-19/32 66 7 2-11/16 68 5/8 16 Neoprene Brass� 31130-0061-P CC1-19/32 40.5 4 3/4 19 5/16 8 Neoprene Plastic* 09200-0011B F1-19/32 40.5 4 3/4 19 5/16 8 Nitrile Plastic* 09200-0003B F1-19/32 40.5 4 3/4 19 5/16 8 Neoprene Brass 09200-0021B F1-19/32 40.5 4 3/4 19 5/16 8 Nitrile Brass 09200-0023-P F2-1/4 57 7 2 51 5/8 16 Neoprene Brass 18777-0001-P HH2 51 1 7/8 22 5/32 12 Neoprene Brass 18653-0001-P I2 51 1 or 2 7/8 22 1/2 12.7 Neoprene Brass 18673-0001-P I2 51 1 or 2 7/8 22 1/2 12.7 Nitrile Brass 18673-0003-P I

2-1/4 57 7 1-1/4 31.5 1/2 12.7 Neoprene Brass 03085-0001-P L2-9/16 65 7 2 51 5/8 16 Neoprene Brass 17937-0001-P Y2-9/16 65 7 2 51 5/8 16 Nitrile Brass 17937-0003-P Y2-9/16 65 4 2 51 3/4 19 Neoprene Brass� 17954-0001-P Y2-9/16 65 6 2 51 5/8 16 Neoprene Brass 17956-0001-P Y2-9/16 65 3 2 51 5/8 16 Neoprene Brass†† 18327-0001-P Y

12

3-1/4 82.5 3 2-57/64 73.4 25/32 21 Neoprene Brass 18958-0001-P GG2-1/4 57 7 1-1/4 31.5 5/8 16 Neoprene Brass 01210-0001-P K2-1/4 57 7 1-1/4 31.5 5/8 16 Nitrile Brass 01210-0003-P K2-1/4 57 3 1-1/4 31.5 5/8 16 Neoprene Brass 04568-0001-P K2-1/4 57 3 1-1/4 31.5 5/8 16 Nitrile Brass 04568-0003-P K2-1/4 57 6 1-1/4 31.5 1/2 12.7 Neoprene Brass 05929-0001-P K2-1/4 57 6 1-1/4 31.5 5/8 12.7 Nitrile Brass 05929-0003-P K2-1/4 57 7 1-29/32 48.4 5/8 16 Neoprene Brass 13554-0001-P K2-1/4 57 5 1-1/4 31.5 5/8 16 Neoprene Plastic 14281-0001-P K2-1/4 57 7 2 51 5/8 16 Neoprene Brass 22120-Series K3-3/4 95 5 3-9/16 88.9 1 25.4 Neoprene Plastic 17370-0001-P Q3-3/4 95 7 2-9/16 63 1 25.4 Neoprene Brass 17935-0001-P Q3-3/4 95 7 3-9/16 88.9 1 25.4 Neoprene Brass 17936-0001-P Q3-3/4 95 7 3-3/4 95 1 25.4 Neoprene Brass 17938-0001-P Q2-7/16 62 3 1-1/4 31.5 5/8 16 Neoprene Brass†† 18838-0001-P W2-9/16 65 3 1-5/8 41.4 5/8 16 Neoprene Brass†† 18948-0001-P X3-1/16 77 5 3 76.2 13/16 20 Neoprene Brass 30919-0001 Z

13 5 127 7 4 101.6 1-1/2 38 Neoprene Brass 02999-0001B U

SELECTION TABLE BY DIMENSIONS

FLEXIBLE IMPELLER REMOVAL TOOLThe Flexible Impeller Removal Tool is the easiest way to remove impellers,especially when the pump is mounted in tight and cramped conditions.• Simple three stage operation easily removes the impeller.• Removes the risk of expensive damage to the pump.• Manufactured from corrosion resistant cast aluminum and stainless steel.• Two models fit all impellers.Size: 15cm wide x 2cm deep x 20cm high max (6" x 1" x 8")Weight: 0.5kg (1.1lb)

ORDER NO. Description50070-0040 Suitable for impellers up to 65mm (2-1/2") diameter50070-0080 Compact Version - Suitable for impellers up to 2-1/4" diameter50070-0200 Suitable for impellers from 65mm (2-1/2") to 118mm (4-1/2") diameter

740

CRUSADER ORDER NO.

20300 18948-0001-P1003026 18838-0001-P

JOHNSON ORDER NO.

09-1026B-9 01210-0001-P09-1027B 01210-0001-P09-1027B-9-00 01210-0003-P09-1028B-9 00920-0001-P09-1028BT-1 17937-0001-P09-1029B 00836-0001-P09-1029B-9 00836-0003-P09-801B 04568-0001-P09-802B 06760-0001-P09-806B-1 04528-0001-P09-808B-1 22405-0001-P09-810B-1 00653-0001-P09-812B-1 13554-0001-P09-814B 17936-0001-P09-819B-00 17935-0001-P09-819B-9 17935-0003-P09-824P-1 06303-0001-P09-824P-9 06303-0003-P

MERCRUISER ORDER NO.

47-59362* 17954-0001-P47-831311350 31130-0061-P

OBERDORFER ORDER NO.

6603 04598-0001-P6617 06303-0001-P7441 17937-0001-P8922 18948-0001-P132-0317 18838-0001-PJ050035 17935-0001-P

WATER CIRCULATING PUMPS/IMPELLER CROSS REFERENCE

For more information see: www.teleflexmarine.com


ONAN ORDER NO.

132-0117 18838-0001-P132-0162 01210-0001-P132-0859 04528-0001-P24880178 18838-0001-P500135 17935-0001-P

PERKINS ORDER NO.

0460024 17937-0001-P0460027 17936-0001-P0460038 01210-0001-P7054 17935-0001-P24880031 17937-0001-P24880178 18838-0001-P24880190 03085-0001-P24880194 18673-0001-P24990272 04528-0001-PNA900010 18838-0001-PNA900012 18948-0001-P

SHERWOOD ORDER NO.

9959 18838-0001-P9979 04528-0001-P10615 18948-0001-P15000 18327-0001-P18200 17937-0001-P

YAMAHA ORDER NO.

YSC-101-03-01-0C 18838-0001-P6TA-12457-00 18948-0001-P

YANMAR ORDER NO.

104211-42070 04528-0001-P124223-42091 22799-0001-P124310-46090 04568-0001-P127610-42200 17937-0001-P128170-42070 21414-0001--P129470-42530 01210-0001-P

VOLVO ORDER NO.

801277 00920-0001-P801277 17937-0001-P803729 04528-0001-P804696 18673-0001-P807904 17935-0001-P825941 00920-0001-P825941 17937-0001-P825942 17935-0001-P831182 04568-0001-P833995 22405-0001-P834794 22120-0001-P842857 17936-0001-P844683 17936-0001-P845796 17936-0001-P860203 01210-0001-P875660 17935-0001-P875697 17936-0001-P897055 18673-0001-P3856039-7 01210-0001-P835512-5 18838-0001-P835874-9 18948-0001-P875575-3 04568-0001-P875583-7 22405-0001-P875736-1 17935-0001-P875807-0 04528-0001-P875808-8 18673-0001-P875811-2 01210-0001-P875814-6 17936-0001-P876120-7 22120-0001-P876554-7 04528-0001-P877061-2 00920-0001-P877061-2 17937-0001-P

Replacement impellers from the inventors of the flexible impeller pump.The following Cross Reference illustrates Jabsco impellers that are interchangeable with other brandproducts. The recommended Jabsco impeller will serve as a direct replacement for the indicated othervariety. It will produce the same required flow rate but also will provide the quality and long-lifeexpected from a genuine Jabsco impeller.

RAW WATER PUMPReplaces:Volvo 841640, PCM RA057023Indmar 685011Johnson Pump 10-24228-1018-35860For Impeller Repair Kit use # 018-30810

RAW WATER PUMPReplaces:PCM RA057024Indmar 685001Johnson Pump 10-24232-1018-35870For Impeller Repair Kit use # 018-30890

IMPELLER CROSS REFERENCE

WATER CIRCULATING PUMPS

*Has single flat drive not spline

741

Always sell an impeller with a new pump.It’s like a spare tire.

IMPELLERSThe impeller is the heart of the flexible impeller pump design. Specially formulated rubber compounds have been developed to ensure longimpeller life as each blade is bending 1750 times a minute or more. Johnson Pump molds all impellers in their own molding facility to maintainhigh quality standards. That’s why so many engine manufacturers choose Johnson as standard OEM equipment.While Johnson has impellers available to fit its OEM pumps, many Johnson impellers interchange with Jabsco impellers.

IMPELLERS• Always use Johnson Pump impellers• Nitrile, oil resistant, diesel and oil only, not gasoline or any light petrochemicals/fuels due to combustion• Gasoline is never pumped with ANY of our pumps• Neoprene, for cooling. Do not use with Diesel or oil due to swelling issues• MC97, for ultra ballast this helps with flexing and reverse.....all around good impeller for cooling purposes, water applications


JOHNSON SPARE IMPELLERSInterchangeable with Jabsco

CC ORDER NO.JABSCOIMPELLER

Material Johnson PumpImpeller No.

Johnson PumpModel No. Material

CC ORDER NO.JOHNSON PUMP

IMPELLER

00653-0001-P Neoprene 09-810B-1 F4 MC97 671-00013

01210-0001-P Neoprene 09-1027B-1 F5 MC97 671-00003

01210-0003-P Nitrile 09-1027B-9-00 F5 Nitrile 671-00010

04528-0001-P Neoprene 09-806B-1 F35 MC97 671-00012

04568-0001-P Neoprene 09-801B F5 Neoprene 671-00006

06303-0001-P Neoprene 09-824P-1 F4 MC97 671-00023

06303-0003-P Nitrile 09-824P-9 F4 Nitrile 671-00022


13554-0001-P Neoprene 09-812B-1 F6 MC97 671-00004

17935-0001-P Neoprene 09-819B-00 F8 Neoprene 671-00017

17935-0003-P Nitrile 09-819B-9 F8 Nitrile 671-00018


17937-0001-P Neoprene 09-1028BT-1 F7 MC97 671-00005


18673-0001-P Neoprene 09-1026B-1 F4 MC97 671-00002


22405-0001-P Neoprene 09-808B-1 F35 MC97 671-00001

N/A 09-1027B-10 F5 MC97 671-00029

N/A 09-810B-9 F4 MC97 671-00014

N/A 09-1077B-9 F2 Nitrile 671-00008

N/A 09-1052S-9 TA3P10 Nitrile 671-00007

N/A 09-804B-9 F5 Nitrile 671-00015

N/A 09-821BT-1 F75 MC97 671-00016

N/A 09-820B F95 Neoprene 671-00021

FLEXIBLE IMPELLERS

742

FLEXIBLE IMPELLERS


THIS IS HOW TO FIT THE NEW IMPELLERLubricate the shaft and the inside of the pump body and end cover.Use soap, grease or oil. By doing so you avoid dry friction when you

start the engine. Mount the impeller by making a pushing andtwisting movement in the rotating direction.

TAKE GOOD CARE OF THE COOLING SYSTEMCHANGE TO A NEW IMPELLER EVERY YEAR

The impeller is a very important security device. Its task is to pumpthe water through the cooling system of the engine.

But remember that the impeller should be replaced every year.And always make sure you get a Johnson Pump original impeller.

Then you”ll know that it matches your pump exactly.

THIS IS HOW TO REMOVE THE OLD IMPELLERRemove the impeller with a slip joint plier.

IMPELLER: 09-1027B-1ORDER NO. 671-00003IMPELLER: 09-1027B-9-00ORDER NO. 671-00010IMPELLER: 09-1027B-10ORDER NO. 671-00029

IMPELLER: 09-1026B-1ORDER NO. 671-00002IMPELLER: 09-1026B-9ORDER NO. 671-00009

IMPELLER: 09-801BORDER NO. 671-00006

IMPELLER: 09-804B-9ORDER NO. 671-00015

IMPELLER IDENTIFICATION GUIDE - Impellers shown are actual size. See Page 525 for Conversion

Change to a new impeller every year. It’s just as important as changing oil and fuel filter.The impellers are illustrated in full scale which means that you can identify your impeller without knowing the part number.


4

2

1

3

F5

F4F5

F5

743

FLEXIBLE IMPELLERS


IMPELLER: 09-1028BT-1ORDER NO. 671-00005IMPELLER: 09-1028B-9ORDER NO. 671-00011




IMPELLER: 09-1052S-9ORDER NO. 671-00007

IMPELLER: 09-824P-9ORDER NO. 671-00022IMPELLER: 09-824P-9-1ORDER NO. 671-00023


IMPELLER: 09-802B (F9)ORDER NO. 671-00019

IMPELLER IDENTIFICATION GUIDEImpellers shown are actual size. See Page 745 for Conversion

1011

8

9

56

7

12

F2

F9

F4

F7

F6

F35

F35

TA3P10

744

FLEXIBLE IMPELLERS




IMPELLER: 09-821BT-1ORDER NO. 671-00016



17

15

14

16


13

F8

F75

F95

F9

F4

Impeller Pump Size Engines Used OnNo.09-801B F5B Volvo/Ducati/VASAMotor09-802B F9B MAN09-804B-9 F5B-12/24V DC Motor-Self-Priming Pumps09-806B F35B FrederickstadMotor/Hypromarine/

Mandalsmotorfabrik/Nanni/Ruggerini/Volvo09-808B F35B Ardna/BMW/BUKH/Mitsubishi/Ducati/

Faryman/Flamme/Grasehi/Petter/Mandals/JG Meaks/VW/Nanni/Onan/Ruggerini/Stamegna Snc/Variant/Volvo/Watermota/Westerbeke

09-810B F4B BMW/Ford/Mitsubishi/Faryman/Nanni/Westerbeke

09-812B F6B-9 V8’s Alaska/Flagship/Hardin/Indmar/Marine Power09-814B F9B Mercedes/SAAB

Impeller Pump Size Engines Used On SizeNo.09-1026B F4B 3&4 Cyl. BUKH/Dolphin Marine/ISUZU/Volvo09-1027B F5B Fiat/Barnes Brinkcraft/BMW/Leyland/

BUKH/C-Power/Dolphin Marine/Mercedes/FNM/Ford/Marine Power/Kubota/Nanni/Pathfinder/Perkins/SAAB/Lehman/Mitsubishi/VM/Volvo

09-1028B F7B Fiat/Bayliner/BMW/Ford/C-Power/DAF/Mercedes/Mitsubishi/SAAB/SABRE/Peugeot/Sole Diesel/Leyland/Valmet Oy/VW/Volvo

09-1029B F8B DAF/Mitsubishi/SAAB/Mercedes/Valmet Oy/VM/Volvo

09-1052S-9 F3B-1907 DC Motor-Self-Priming Pumps09-1064-9 F3P-10 Mini Pump09-1077B-9 F2P-10 DC Motor-Self-Priming Pumps

745

Ref. Pump ORDER NO. MFR.# MATERIAL IMPELLER IMPELLER INNER NO. OF BLADESNo. DIAMETER DEPTH DIAMETER5 F2 671-00008 09-1077B-9 NITRILE 1.29" (35.2mm) .50" (12.7mm) .31" (8mm)/Flat 6

6 TA3P10 671-00007 09-1052S-9 NITRILE 1.78" (45.2mm) .50" (12.8mm) .31" (8mm)/Flat 6

7 F35 671-00012 09-806B-1 MC97 1.58"(40mm) .75"(19mm) .37"(9.5mm) 68 671-00001 09-808B-1 MC97 1.58"(40mm) .75"(19mm) .47"(12mm) 6

14 F4 671-00013 09-810B-1 MC97 2"(50.8mm) .87"(22mm) .472"(12mm) 614 671-00014 09-810B-9 NITRILE 2"(50.8mm) .87"(22mm) .472"(12mm) 63 671-00002 09-1026B-1 MC97 2"(50.8mm) .87"(22mm) .50"(12.7mm) 63 671-00009 09-1026B-9 NITRILE 2"(50.8mm) .87"(22mm) .50"(12.7mm) 69 671-00022 09-824P-9 NITRILE 2"(50.8mm) .87"(22mm) .31" (8mm)/Flat 69 671-00023 09-824P-1 MC97 2"(50.8mm) .87"(22mm) .31" (8mm)/Flat 6

1 F5 671-00015 09-804B-9 NITRILE 2.25"(57.1mm) 1.24"(31.5mm) .79"(20mm) 124 671-00006 09-801B NEOPRENE 2.25"(57.1mm) 1.24"(31.5mm) .63"(15.9mm)/Key 122 671-00003 09-1027B-1 NEOPRENE 2.25"(57.1mm) 1.24"(31.5mm) Splines 122 671-00010 09-1027B-9-00 NITRILE 2.25"(57.1mm) 1.24"(31.5mm) Splines 122 671-00029 09-1027B-10 MC97 2.25"(57.1mm) 1.24"(31.5mm) Splines 1210 F6 671-00004 09-812B-1 MC97 2.25"(57.1mm) 1.90"(48.2mm) Splines 12

11 F7 671-00005 09-1028BT-1 MC97 2.56"(65mm) 1.98"(50.2mm) Splines 8671-00011 09-1028B-9 NITRILE 2.56"(65mm) 1.98"(50.2mm) Splines 8

15 F75 671-00016 09-821BT-1 MC97 2.56"(65mm) 3.15"(80mm) Splines 12

13 F8 671-00017 09-819B-00 NEOPRENE 3.74"(95mm) 2.48"(63mm) Splines 11671-00018 09-819B-9 NITRILE 3.74"(95mm) 2.48"(63mm) Splines 11

12 F9 671-00019 09-802B NEOPRENE 3.74"(95mm) 3.48"(88.5mm) Splines 917 671-00020 09-814B NEOPRENE 3.74"(95mm) 3.48"(88.5mm) Splines 12

16 F95 671-00021 09-820B NEOPRENE 3.74"(95mm) 5.12"(130mm) Splines 12

PRODUCT & COMPATIBILITY CHART

FLEXIBLE IMPELLERS

CHANGE TO A NEW IMPELLER EVERY YEAR. IT’S JUST AS IMPORTANT AS CHANGING OIL AND FUEL FILTER. THE IMPELLERS ARE ILLUSTRATED

IN FULL SCALE WHICH MEANS THAT YOU CAN IDENTIFY YOUR IMPELLER WITHOUT KNOWING THE PART NUMBER.


IMPELLER REPLACEMENT - SELECTION TABLE BY DIMENSIONS

MC97 & Neoprene for cooling, Nitrile - Oil resistant

746

IMPELLER REPLACEMENT KITS


IMPELLERS• Always use Johnson Pump impellers• Nitrile, oil resistant, diesel and oil only, not gasoline or any light petrochemicals/fuels due to combustion• Gasoline is never pumped with ANY of our pumps• Neoprene, for cooling. Do not use with Diesel or oil due to swelling issues• MC97, for ultra ballast this helps with flexing and reverse.....all around good impeller for cooling purposes, water applications

Ref. ORDER NO. JOHNSON PUMPImpeller No. Material Sherwood

No.Mercruiser

No. Jabsco No.

A 671-00024 09-701B-1 Neoprene 9959K 18838-0001-PB 671-00025 09-702B-1 Neoprene 10615K 18948-0001-PC 671-00026 09-703B-1 Neoprene 47-59362T 17954-0001-PD 671-00027 09-704BT-1 Neoprene 17000K 18958-0001-PE 671-00028 09-705BT-1 Neoprene 18000K

C

E

D

B

A

IMPELLER REPLACEMENT KITS


747

ENGINE COOLING PUMPS

ENGINE COOLING PUMPModel No. F5B-9Flange mounted bronze pump. OEMreplacement, see chart below.

ENGINE COOLING PUMPModel No. F35B-9Flange mounted bronze pump. OEM replacement, see chart below.

Engine Manufacturer TypeVolvo Penta ** AQ131A/B/C/D, AQ140A, AQ145,

AQ145A/B, AQ151A/B/C, AQ165A,AQ170B/C, AQ250A, AQ251A

Volvo Penta * BB21

ENGINE COOLING PUMPModel No. F9B-9Flange mounted bronze pump. OEMreplacement, see chart below.

Engine Manufacturer TypeDetroit Diesel** 671T1, 871, 1271

ORDER NO. Mfr. No. Description103-26212 * 10-32621-2 F5B-9 Pump / Full Cam103-26213 ** 10-32621-3 F5B-902 Pump

/ Reduced CamREPLACEMENT PARTS

671-10006 09-45913 Service Kit671-00006 + 09-801B Impeller671-20002 + 0.2233.001 Lip Seal671-30005 + 01-45930 Gasket671-45023 01-45023 Bushing671-45022 01-45022 Shaft671-04490 + 0.0141.901 End Cover Screw

ORDER NO. Mfr. No. Description101-309501 10-13095-01 F9B-9 Pump w/Flange

REPLACEMENT PARTS671-10013 09-45582 Service Kit671-00020 09-814B Impeller

Engine Manufacturer TypeVolvo Penta MD1, MD2, MD2B, MD2BHY,

MD1KHD/HY, MD1B, MD1/11,MD5A, MD1A, MD10A, MD5B/C,MD6A/B, MD7A/B


103-51573 10-35157-3 F35B-9 Pump

REPLACEMENT PARTS671-10001 09-45589 Service Kit671-00001 + 09-808B-1 Impeller671-20001 + 0.2233.010 Lip Seal671-30001 + 01-43240 Gasket671-40002 0.3431.441 Bearing671-45556 01-45556 Shaft+ Items contained in Seal Kit.

+ Items contained in Seal Kit. * Full Cam / ** Reduced Cam - 40-50 lower capacity

REPLACEMENT PARTS ONLY FOR F35B-8 - 3/8'' HEAVY DUTY IMPELLER PUMP

+ Service Kit contains neoprene impeller, seal, gasket, end cover screws.* Shaft for # 10-35038-41 / **Shaft for # 10-35038-5 & # 10-35038-5E

REPLACEMENT PARTS - For 10-35038-5 & 10-35038-5E


671-00001 + 09-808B Impeller671-20001 + 0.2233.010 Lip Seal671-30001 + 01-43240 Gasket671-10001 09-45589 Service Kit671-40001 0.3431.748 Bearing671-45069 ** 01-45069 Shaft **671-45416 * 01-46416 Shaft*671-04176 + 0.0141.500 End Cover Screw


FLANGE PUMPS


748



ORDER NO. Mfr. No. Description102-480501 10-24805-01 F6B-9 Pump

REPLACEMENT PARTS671-10004 09-45825 Service Kit671-00004 + 09-812B-1 Impeller671-20002 + 0.2233.001 Lip Seal671-30003 + 01-45315 Gasket671-40003 0.3431.742 Bearing671-04550 + 0.0141.502 End Cover Screw

CRANKSHAFT PUMPS

ENGINE COOLINGPUMP MODEL # F5B-9Crankshaft mounted bronze pump.OEM replacement, see chart below.

ENGINE COOLINGPUMP MODEL # F6B-9Crankshaft mounted bronze pump.OEM replacement, see chart below.


REPLACEMENT PARTS671-10003 09-45808 Service Kit671-00003 + 09-1027B-1 Impeller671-20002 + 0.2233.001 Lip Seal671-30003 + 01-45315 Gasket671-40003 0.3431.742 Bearing671-60001 09-45807 Carrier671-04550 + 0.0141.502 End Cover Screw

+ Items contained in Service Kit


ENG. MFR. TYPE

Flagship GM 350Indmar Ford & GM 4Marine Exhaust 4 cyl. DeereMarine Power GM 350Panther Marine GM 350Volvo Penta 230/SP/spmt, 250/SP,

251/SP/DOHC, 431/SP/DP,500/SP/DP, 501/SP/DP, 570/SP/DP,571/SP/DP, AQ200, AQ225, AQ250,AQ290

York Power 4 cyl. Deere

ENG. MFR. TYPE

Alaska Diesel Lugger/DeereFlagship GM 454Hardin GM V8Indmar Ford & GM 8Marine Power GM 454 & Ford 351Panther Marine GM 454

ENGINE COOLING PUMPMODEL # F7B-9Flange mounted bronze pump. OEMreplacement, see chart below.


REPLACEMENT PARTS671-10005 09-45592 Service Kit671-00005 + 09-1028BT-1 Impeller671-20002 + 0.2233.001 Lip Seal671-30004 + 01-42445 Gasket671-40004 0.3431.483 Bearing671-45844 01-45844 Shaft671-04550 + 0.0141.502 End Cover Screw


ENGINE COOLING PUMPMODEL # F4B-9Flange mounted bronze pump. OEMreplacement, see chart below.

ENG. MFR. TYPE

Volvo Penta MD17C/D, AQ115/A, AQ130 A/B/C/D,MD3B, AQ110/115, AQ120/B,AQ125A/B, AQ140, AQ60F, AQ95/A,BB100, BB115B/C, BB30, MB16A,MB18-MB18F, MB20A/B/C, MD20B


REPLACEMENT PARTS671-10011 09-45905 Service Kit671-00002 + 09-1026B-1 Impeller671-20001 + 0.2233.010 Lip Seal671-30002 + 01-45284 Gasket671-40002 0.3431.441 Bearing671-45235 01-45235 Shaft


ENG. MFR. TYPE

Volvo Penta MD31, TMD31, TAMD31A/B,TMD41, TAMD41A/B,TMD40A/B, MD40A, AD31A/B,AD41A/B, AQAD 30A, AQD40A,AQD41A, D41A/B, MD31

+ Service Kit contains neoprene impeller, seal, gasket, end cover screws.

FLANGE PUMPS

749

SHERWOOD/C.C. MARINE PART CROSSOVER

For more information see: www.sherwoodpumps.com

CC PART NO. Mfr. No. CC PART NO. Mfr. No. CC PART NO. Mfr. No.651-00035 E35 651-10996 10996 651-18441 18441651-01006 G1006 651-10997 10997 651-18570 18570651-00021 G21 651-10999 10999 651-18576 18576651-00030-2 G30-2B 651-11068 11068 651-18652 18652651-00045-1 G45-1 651-11360 11360 651-18576 18576651-00007 G7B 651-11367 11367 651-18652 18652651-00907 G907P 651-11389 11389 651-18663 18663651-09901 G9901 651-11744 11744 651-18742 18742651-09903 G9903 651-11803 11803 651-18806 18806651-00075 K75B 651-11805 11805 651-19620 19620651-00360 N10360GX 651-11807 11807 651-19667 19667651-00105 P105 651-11810 11810 651-19674 19674651-00030-1 R30G-1 651-11854 11854 651-19714 19714651-00991 R991 651-12231 12231 651-19869 19869651-02075 02075 651-12444 12444 651-21208 21208651-04257 04257 651-12665 12665 651-21209 21209651-04258 04258 651-12855 12855 651-21570 21570651-04259 04259 651-12856 12856 651-21776 21776651-04303 04303 651-12859 12859 651-21930 21930651-04304 04304 651-14159 14159 651-22117 22117651-04306 04306 651-14161 14161 651-22767 22767651-04432 04432 651-14214 14214 651-22768 22768651-06333 06333 651-14238 14238 651-22770 22770651-08000 08000K 651-14239 14239 651-23448 23448651-08490 08490 651-14240 14240 651-23459 23459651-09000 09000K 651-14379 14379 651-23799 23799651-09919 09919 651-14380 14380 651-23972 23972651-09959 09959K 651-15000 15000K 651-23973 23973651-10072 10072 651-15055 15055 651-23976 23976651-10077 10077K 651-15883 15883 651-23977 23977651-10093 10093 651-15935 15935 651-23979 23979651-10103 10103 651-15942 15942 651-23980 23980651-10195 10195 651-15945 15945 651-24025 24025651-10197 10197 651-15951 15951 651-24176 24176651-10285 10285 651-15952 15952 651-24470 24470651-10286 10286 651-15955 15955 651-26000K 26000K651-10514 10514C 651-16126 16126 651-27000K 27000K651-10515 10515C 651-17000 17000K 651-29000K 29000K651-10545 10545 651-18000 18000K 651-30000K 30000K651-10615 10615K 651-18001 18001651-10927 10927 651-18005 18005651-10929 10929 651-18016 18016651-10931 10931 651-18029 18029651-10944 10944 651-18271 18271

750

SHERWOOD IMPELLERS

GENUINE SHERWOOD IMPELLERS - FOR IMPELLER SELECTION GUIDESEE NEXT PAGE


Mfr. No. 09959KORDER NO: 651-09959

Mfr. No. 09000KORDER NO: 651-09000

Mfr. No. 8000KORDER NO: 651-08000

Mfr. No. 17000KORDER NO: 651-17000Threaded / Thru-Key insert

Mfr. No. 18000KORDER NO: 651-18000

Mfr. No. 29000KORDER NO: 651-29000KNote: 29000K Impeller has a

45˚ 10 Tooth SplineMfr. No. 26000K

ORDER NO: 651-26000KNote: 26000K Impeller has a

45˚ 10 Tooth Spline

ORDER NO. 651-27000KMfr. No. . . . . . . . .27000K

Mfr. No.10615KORDER NO: 651-10615

Mfr. No.15000KORDER NO: 651-15000

751For more information see: www.sherwoodpumps.com

A

D

B

K = Kit (Includes: Impeller, Gasket, and O-Ring) 18000K and 26000K do not include P.O.P. packagingNeopreneTM Maximum Temperature: 130˚F

ORDER NO. Mfr. No. DIAMETER (A) WIDTH (B) SHAFT DIA. (C) KEYWAY (D) NO. OF VANES Material

651-08000 08000K 1-9/16" 39.7mm 3/4" 19.0mm 7/16" D-Slot 6 Neoprene

651-10077 10077K 2-1/4" 57.1mm 25/32" 19.8mm 1/2" 3/32" 12 Neoprene

651-09000 09000K 2-7/16" 61.9mm 7/8" 22.2mm 5/8" 3/16" 12 Neoprene

651-09959 09959K 2-7/16" 61.9mm 1-1/4" 31.7mm 5/8" 3/16" 12 Neoprene

651-10615 10615K 2-9/16" 65.0mm 1-5/8" 41.0mm 5/8" 3/16" 12 Neoprene

651-15000 15000K 2-9/16" 65.0mm 2" 51.0mm 5/8" 3/16" 12 Neoprene

651-17000 17000K 3-5/16" 84.0mm 2-7/8" 73.0mm 20mm 3/16" 12 Neoprene

651-18000 18000K 3-3/4" 95.0mm 4" 101.5mm 15/16" Spline 12 Neoprene

651-26000K 26000K 3-3/4" 95.0mm 3-1/8" 80.0mm 11/12" Spline 12 Neoprene

651-27000K 27000K 3-5/16" 84.0mm 2-7/8" 73.0mm 3/4" Spline 12 Neoprene

651-29000K 29000K 3-3/4" 95mm 4" 102mm 15/16" Spline 12 Neoprene

651-30000K 30000K 4-1/2" 114mm 4-5/16" 110mm 15/16" Spline 10 Neoprene

IMPELLER SELECTION GUIDE

ORDER NO. 651-15000Mfr. No. . . . . . . . .15000KDia (A) . . . . . . . . .2-9/16" 65.0mmWidth (B) . . . . . . .2" 51mmShaft (C) . . . . . . .5/8"Keyway (D) . . . . . .3/16"No. of Vanes . . . . .12Material . . . . . . . .Neoprene

To maintain engine performance, insist uponGENUINE Sherwood Impellers.

Imitation leaves you dead in the water!

To maintain engine performance, insist upon genuine Sherwood impellers. Keep it cool with the original!

ORDER NO. 651-30000KMfr. No. . . . . . . . .30000K

Mfr. No.10077KORDER NO: 651-10077

SHERWOOD IMPELLER SELECTION GUIDE

752

ENGINE COOLING PUMPS & WATER STRAINERS


WESTERBEKEORDER No. 651-00030-1MODEL # R30G-1Engines: 6 Cyl. DieselWesterbeke: 24102Inlet port: 1/2" NPTOutlet port: 1/2" NPT

PLEASURECRAFTORDER No. 651-10140MODEL # P1014Inlet port: 1-1/4"Outlet port: 1-1/4"

+ Items contained in Service Kits+ Items

contained inService Kits

RAW WATER STRAINERS

ORDER NO. PORT SIZE SCREEN MESH BRACKET NO. SCREEN NO. O-RING NO. BOWL NO.

651-15935 1/2" 20 Mesh N/A 651-11810 651-11805 651-14379

651-18001 3/4" 20 Mesh 651-14240 651-11810 651-11805 651-14379

651-18005 1" 20 Mesh 651-14239 651-11807 651-11803 651-14380

651-18016 1-1/4" 20 Mesh 651-14238 651-14214 651-11803 651-14380

651-18029 1-1/2" 20 Mesh 651-21930 651-16126 651-11803 651-14380

ORDER NO. Mfr. No. Description Qty.

651-24025 24025 Major Repair Kit

651-10077 10077K+ Impeller Kit 1

00336 Plug 1

00343 Lockwasher 8

01311 Dowel pin 2

651-02075 02075+ Bushing (Graphite) 1

651-04303 04303+ Retaining Ring (Int) 1

651-04304 04304+ Retaining Ring (Ext) 3

651-04306 04306+ Ball Bearing 1

05437 Screw (Machine) 2

651-10093 10093+ Woodruff Key 1

651-10195 10195 Cam Screw 1

651-10197 10197+ Gasket 1

10279 Cover 1

651-10285 10285+ Cam 1

10596 Body 1

651-11367 11367+ Seal & Seat Assy. 1

13370 Key - Square 1

18899 Screw (Hex Head) 6


651-09000 09000K Impeller Kit 1

00343 Lock Washer 4

651-04258 04258 Retaining Ring (Ext) 2

651-04259 04259 Retaining Ring (Int) 1

04264 Flat Washer 1

651-10195 10195 Cam Screw 1

10926 Seal Seat 112211 Ball Bearing 218576 Woodruff Key 1

18035 Mechanical Seal 1

18573 Cap Screw 2

18574 Lock Washer 2

651-18663 18663 Cam 1

19964 O-Ring 1

21857 Flat Washer 1

21859 Pully 1

21862 Housing 1

21916 Screw Socket HD Cap 4

21974 Spacer 1

24124 Shaft 1

24125 Cover Plate 1

24126 Lock Washer 124127 Serrated Flange Nut 1

• Full Flow Filtering with Ultra Low Pressure Differential• Easy In-Line Cleaning• Durable Non-Corrosive Construction• Quick Clean Bowl Examination• Lightweight with Optional Mounting Bracket• Stainless Steel Screens

+ Items contained in Major Repair Kits • Items contained in Minor Repair Kits


23976 Minor Repair Kit

25030 Major Repair Kit

651-10615 10615K+, • Impeller Kit 1

23966 Cap Screw 4

00343 Lock Washer 4

21120+ Cover Plate 1

24107 Housing 1

651-12231 12231+, • O-Ring/Gasket 1

651-04432 04432+, • Key 1

19293 Shaft 1


651-10515 10515C+ Cam Screw Assy. 1

651-10944 10944+ Cam 1

19295+ Wear Plate 1

651-04258 04258+, • Retaining Ring 2

651-12859 12859+, • Water Seal/Seat Assy. 1

04264+,• Washer 1

97176 Hub 1

651-04259 04259+,• Retaining Ring 1

12211+ Bearing 2

05133 Spacer 1

KOHLERORDER No. 651-00907MODEL # G907PEngines: FordInlet port: 3/8" NPT, Outlet port: 3/8" NPT

753For more information see: www.sherwoodpumps.com


ORDER NO. Mfr. No. Description Qty651-23976 23976 Minor Repair Kit651-23977 23977 Major Repair Kit

12328 Body 112228 Housing 1

651-10615 10615K+, • Impeller 1651-12231 12231+, • O-Ring 1651-12856 12856+ Wear Plate 1651-12855 12855+ Gasket 1651-04432 04432+, • Key 1

12612 Shaft 1651-04258 04258+, • Retaining Ring (Ext) 3651-04259 04259+ Retaining Ring (Int) 2

12791 Pin 1651-23448 23448+ Ball Bearing 2651-10944 10944+ Cam 1651-10515 10515C Cam Screw 1

12615 Hub 1651-12859 12859+, • Seal/ Seat Assy. 1

12857 Screw 312710 Lock Washer 304264+, • Washer 105133 Spacer 1

ORDER NO. Mfr. No. Description Qty19354 Major Repair Kit21120 Cover 121378 Body 1

651-10615 10615K+ Impeller 1651-12231 12231+ Gasket 1651-04432 04432 Key 1

19308+ Shaft 105126+ Retaining Ring 106837+ Retaining Ring 1

651-08490 08490+ Ball Bearing 2651-10944 10944 Cam 1651-10515 10515C Cam Screw 1651-18652 18652+ Seal/ Seat Assy. 1

19275 Hub 1

CHRIS CRAFTORDER NO. 651-00045-1MODEL # G45-1Engines: 454Chris Craft #16.80-18347Inlet port: 1-1/4"Outlet port: 1-1/4"

VOLVO PENTA,OSCO MOTORSORDER NO. 651-00105MODEL # P105Inlet port: 1-1/4"Outlet port: 1-1/4"

ORDER NO. Mfr. No. Description Qty10244 Minor Repair Kit12301 Major Repair Kit09909 Body 110416C Housing 1

651-10077 10077K+, • Impeller Kit 209918+, • O-Ring 110079 Wear Plate 109917+, • Gasket 1

651-10093 10093 Key 110078+ Shaft 1

651-04304 04304 Retaining Ring (Ext) 109907 Cover 100528 Pin 104306+, • Ball Bearing 110134 Cam 1

651-09919 09919 Cam Screw 102075+, • Bushing 110546+, • Seal/ Seat Assy. 1

CHRIS CRAFTORDER NO. 651-00360MODEL # N10360GXEngines: 430, 283Chris Craft #16.80-10003Inlet port: (2) 1/2" NPTOutlet port: (2) 1/2" NPT

ORDER NO. Mfr. No. Description Qty22276 Major Repair Kit22141 Body 121150 Housing 1

651-10615 10615K+ Impeller 1651-12231 12231+ O-Ring 2

22142+ Wear Plate 1651-04432 04432+ Key 1

22143 Shaft 1651-04258 04258+ Retaining Ring (Ext) 3651-04259 04259+ Retaining Ring (Int) 2

22140 Cover 121056 Pin 4

651-23448 23448 Ball Bearing 1651-10929 10929+ Cam 1651-10515 10515C Cam Screw 1651-06333 06333 Bushing 1651-22117 22117 Seal/ Seat Assy. 1651-21208 21208 Lip Seal 1

ONANORDER NO. 651-01006MODEL # G1006Engines: 5 Cyl. DieselInlet port: 1"Outlet port: 1"

+ Items contained in Major Repair Kits• Items contained in Minor Repair Kits

+ Items contained in Major Repair Kits• Items contained in Minor Repair Kits

+ Items contained in Major Repair Kits

+ Items contained in Major Repair Kits

754



VOLVO/OMCORDER NO. 651-09901MODEL # G9901(pulley dia. 6.5”)Engines: 6-8 Cyl.Volvo/OMC# 3852398Inlet port: 1-1/4"Outlet port: 1"

CHRIS CRAFTORDER NO. 651-00030-2MODEL # G30-B2BEngine: 350Chris Chraft # 16.80-18346Inlet port: 1"Outlet port: 1"

ONANORDER NO. 651-00075MODEL # K75BEngines: 4 Cyl. DieselInlet port: 1"Outlet port: 1"



651-09959 09959K+ Impeller Kit 1



04264+ Washer 1

651-04432 04432+ Woodruff Key 1

05133 Spacer 1

651-10515 10515C+ Cam Screw Assy. 1

651-12855 12855+ Gasket 1

651-12856 12856+ End Plate 1

12857 Cap Screw 3

651-12859 12859+ Seal & Seat Assy. 1

651-15883 15883+ Cam 1

21757 Lock Washer 3

651-23448 23448+ Ball Bearing 2



651-09959 09959K+ Impeller Kit 1



04264+ Washer 1

651-04432 04432+ Woodruff Key 1

05133 Spacer 1

651-10515 10515C+ Cam Screw Assy. 1

12710 Lock Washer 3

651-12855 12855+ Gasket 1

651-12856 12856+ End Plate 1

651-12859 12859+ Seal & Seat Assy. 1

13794 Cap Screw 3

13795 Hub 1

651-15883 15883+ Cam 1

651-23448 23448+ Ball Bearing 2



651-09959 09959K+ Impeller Kit 1



04264+ Washer 1

651-04432 04432+ Woodruff Key 1

05133 Spacer 1

651-10515 10515C+ Cam Screw Assy. 1

12710 Lock Washer 3

12791 Pin - SS 1

651-12855 12855+ Gasket 1

651-12856 12856+ End Plate 1

12857 Cap Screw 3

651-12859 12859+ Seal & Seat Assy. 1

651-15883 15883+ Cam 1

651-23448 23448+ Ball Bearing 2


18655 Major Repair Kit

651-09959 09959K+ Impeller Kit 1

651-04257 04257+ Bearing 1




651-10515 10515C Cam Screw Assy. 1

651-10927 10927+ Seal & Seat Assy. 1

12710 Lock Washer 3

12841 Key 1

651-15883 15883+ Cam-Br 1

18266 Capscrew 3

18427 Housing 1

18428 Cover 1

18446 Pulley 1

18464+ Shaft-316SS 1

+ Items contained in Service Kits+ Items contained in Service Kits

+ Items contained in Service Kits + Items contained in Service Kits

YAMAHAORDER NO. 651-00991MODEL # R991Engines: 4.3 V6 and 305/350 V8 ChevyYamaha # 10100000Inlet port: 1-1/4"Outlet port: 1-1/4"

755



CHRYSLERORDER NO. 651-00007MODEL # G7BEngines: 318 and 360Chrysler # 4142878Inlet port: 1-1/4"Outlet port: 1-1/4"



651-09959 09959K+ Impeller Kit 1



04264+ Washer 1

651-04432 04432+ Woodruff Key 1

05133 Spacer 1

651-10515 10515C+ Cam Screw Assy. 1

12303 Housing 1

12710 Lock Washer 3

651-12855 12855+ Gasket 1

651-12856 12856+ End Plate 1

12857 Cap Screw 3

651-12859 12859+ Seal & Seat Assy. 1

651-15883 15883+ Cam 1

651-23448 23448+ Ball Bearing 2

CRUSADERORDER NO. 651-00035MODEL # E35Engines: 220, 270, 300, and 350Crusader # 97179Inlet port: 1" NPTOutlet port: 1" NPT

PCMORDER NO. 651-00021MODEL # G21Engines: Ford 351 / 302Pleasurecraft # RA057007Inlet port: 1"Outlet port: 1"

VOLVO/OMCORDER NO. 651-09903MODEL # G9903(pulley dia. 4.5”)Engines: 4 Cyl.Volvo / OMC # 3855079Inlet port: 1-1/4"Outlet port: 1"




651-09959 09959K+ Impeller Kit 1



04264+ Washer 1

651-04432 04432+ Woodruff Key 1

05133 Spacer 1

651-10515 10515C+ Cam Screw Assy. 1

651-12855 12855+ Gasket 1

651-12856 12856+ End Plate 1

12857 Cap Screw 3

651-12859 12859+ Seal & Seat Assy. 1

651-15883 15883+ Cam 1

21151 Housing 1

21757 Lock Washer 3

651-23448 23448+ Ball Bearing 2



651-10615 10615K+ Impeller Kit 1



04264+ Washer 1

651-04432 04432+ Woodruff Key 1

05133 Spacer 1

651-10515 10515C+ Cam Screw Assy 1

651-10929 10929+ Cam 1

12710 Lock Washer 3

651-12855 12855+ Gasket 1

651-12856 12856+ Ends Plate 1

12857 Cap Screw 3

651-12859 12859+ Seat & Seal Assy 1

12952 Housing 1

651-23448 23448+ Ball Bearing 2



651-10615 10615K+ Impeller Kit 1

00336 Plug 2

01311 Dowel pin 2

651-04257 04257+ Ball Bearing 1



651-04432 04432+ Woodruff Key 1


10182 Cover 1

651-10927 10927+ Seal & Seat Assy. 1

651-10944 10944+ Cam 1

651-11744 11744 Shaft 1

12710 Lock Washer 4

17485 Screw 4

97176 Hub 1


756

ORDER NO. Part No. Model No. Flow Rate Capacity Reduces

DEDICATED FAUCET561-46060 5614606 USF-C 0.5 gpm/1.8 lpm 500 gal/1892 L • Lead1, mercury1, cysts1 and VOC’s1

• Sediment and rust down to 0.5 micron

FULL FLOW UNDERSINK SYSTEM561-55060 5615506 US-B1 1.5 gpm/5.6 lpm 2,000 gal/7570 L • 99.9% of common water-borne bacteria2, mould

spores3, algae3, and parasitic protozoan cysts1

• Chlorine taste and odour• Sediment and rust down to 0.2 micron

WHOLE VEHICLE SYSTEM561-63090 5616309 WV-B3 3.5 gpm/13.2 lpm 15,000 gal • 99.9% of common water-borne

bacteria2, mould spores3, algae3, and parasiticprotozoan cysts1

• Chlorine taste and odour• Sediment including dirt, rust, sand and silt

1 As tested in accordance with NSF/ANSI Standard 53.2 As tested with either E.Coli ATCC (11229) or Pseudomonas (B) diminuta ATCC (19146)3 As tested with Dekkera bruxellensis ATCC (62476)

IMPROVE YOUR ON-BOARD WATER NO MATTER WHERE YOU HOOK-UP.3M filters improve the taste, odour and clarity of tank and local water sources. All systems feature compact design, easy installation,

a quick-change sanitary filter cartridge and built-in bacteria growth inhibitor.Now your system can do even more with models that reduce 99.99% of common water-borne bacteria1 and parasitic cysts1.

DEDICATED FAUCET UNDERSINK SYSTEMS,MODEL NO. USF-C• For drinking, cooking or any sink water use• Offers easy under sink installation• Includes chrome side faucet• Compact Size• NSF Listed

ORDER NO. Mfr. No. Description561-46060 5614606 Dedicated Faucet

Undersink System561-45060 5614506 Replacement Cartridge

FULL FLOW UNDERSINK SYSTEMS,MODEL NO. US-B1• For drinking, cooking or any sink water use• Offers easy under sink installation• Uses your existing galley sink faucet for higher low rate

ORDER NO. Mfr. No. Description561-55060 5615506 Full Flow Undersink System561-54090 5615409 Replacement Cartridge

WHOLE VEHICLE SYSTEMS,MODEL NO. WV-B3• For all water use on-board• High capacity and flow rate• Main line installation• NSF Listed

ORDER NO. Mfr. No. Description561-63090 5616309 Whole Vehicle System561-34170 5613417 Replacement Cartridge

WATER FILTRATION SYSTEMS SPECIFICATIONS

/56, 781 L

Dedicated FaucetUndersink System561-46060

Whole Vehicle System561-63090

Full Flow Undersink System561-55060

UNDERSINK SYSTEM

For more information see: www.3m.com/marine

3M™ MARINE WATER FILTRATION

757

PLUMBING FITTINGS

ORDER NO. Mfr. No. DescriptionBARB TO BARB ADAPTERS

732-88000 8800 Adapter, 5/8" Barb x 5/8"Hose Barb732-88050 8805 Adapter, 5/8" Barb x 3/4" Hose Barb732-88100 8810 Adapter, 5/8" Barb x 1" Hose Barb732-88300 8830 Adapter, 3/4" Barb x 3/4" Hose Barb732-88350 8835 Adapter, 3/4" Barb x 1" Hose Barb732-88400 8840 Adapter, 3/4" Barb x 1-1/8" Hose Barb732-88450 8845 Adapter, 3/4" Barb x 1-1/4" Hose Barb732-88500 8850 Adapter, 3/4" Barb x 1-1/2" Hose Barb732-88550 8855 Adapter, 1" Barb x 1" Hose Barb732-88600 8860 Adapter, 1" Barb x 1-1/8" Hose Barb732-88650 8865 Adapter, 1" Barb x 1-1/4" Hose Barb732-88700 8870 Adapter, 1" Barb x 1-1/2" Hose Barb732-88750 8875 Adapter, 1-1/8" Barb x 1-1/8" Hose Barb732-88800 8880 Adapter, 1-1/8" Barb x 1-1/4" Hose Barb732-88850 8885 Adapter, 1-1/8" Barb x 1-1/2" Hose Barb732-88900 8890 Adapter, 1-1/4" Barb x 1-1/4" Hose Barb732-88950 8895 Adapter, 1-1/4" Barb x 1-1/2" Hose Barb732-88990 8899 Adapter, 1-1/2" Barb x 1-1/2" Hose Barb

ORDER NO. Mfr. No. DescriptionMALE PIPE THREAD TO BARB ADAPTERS

732-89000 8900 Adapter, 1/2" MPT to 5/8" Barb Adapter732-89010 8901 Adapter, 1/2" MPT to 3/4" Barb Adapter732-89100 8910 Adapter, 3/4" MPT to 5/8" Barb Adapter732-89130 8913 Adapter, 3/4" MPT to 1-1/8" Barb Adapter732-89220 8922 Adapter, 1" MPT to 1" Barb Adapter732-89230 8923 Adapter, 1" MPT to 1-1/8" Barb Adapter732-89240 8924 Adapter, 1" MPT to 1-1/4" Barb Adapter732-89250 8925 Adapter, 1" MPT to 1-1/2" Barb Adapter732-89330 8933 Adapter, 1-1/4" MPT to 1-1/8" Barb Adapter732-89350 8935 Adapter, 1-1/4" MPT to 1-1/2" Barb Adapter732-89410 8941 Adapter, 1-1/2" MPT to 3/4" Barb Adapter732-89420 8942 Adapter, 1-1/2" MPT to 1" Barb Adapter732-89430 8943 Adapter, 1-1/2" MPT to 1-1/8" Barb Adapter732-89440 8944 Adapter, 1-1/2" MPT to 1-1/4" Barb Adapter732-89450 8945 Adapter, 1-1/2" MPT to 1-1/2" Barb Adapter

MALE PIPE THREAD TO MPT ADAPTERS732-89900 8990 Adapter, 1-1/4" MPT to 1-1/4" MPT Adapter732-89950 8995 Adapter, 1-1/2" MPT to 1-1/2" MPT Adapter

ORDER NO. Mfr. No.DescriptionFEMALE TO FEMALE ADAPTERS

732-87000 8700 Adapter, 1/2" FPT x 1/2" FPT732-87010 8701 Adapter, 1/2" FPT x 3/4" FPT732-87050 8705 Adapter, 3/4" FPT x 3/4" FPT732-87060 8706 Adapter, 3/4" FPT x 1" FPT732-87100 8710 Adapter, 1" FPT x 1" FPT732-87120 8712 Adapter, 1" FPT x 1-1/2"FPT

FEMALE TO MALE ADAPTERS732-87300 8730 Adapter, 1/2" FPT x 1/2" MPT732-87310 8731 Adapter, 1/2" FPT x 3/4" MPT732-87340 8734 Adapter, 1/2" FPT x 1-1/2" MPT732-87350 8735 Adapter, 3/4" FPT x 1/2" MPT732-87370 8737 Adapter, 3/4" FPT x 1" MPT732-87490 8749 Adapter, 1-1/4" FPT x 1-1/2" MPT

FEMALE TO BARB ADAPTERS732-87500 8750 Adapter, 1/2" FPT x 5/8" Hose Barb732-87510 8751 Adapter, 1/2" FPT x 3/4" Hose Barb732-87580 8758 Adapter, 3/4" FPT x 5/8" Hose Barb732-87600 8760 Adapter, 3/4" FPT x 3/4" Hose Barb732-87610 8761 Adapter, 3/4" FPT x 1" Hose Barb732-87620 8762 Adapter, 3/4" FPT x 1-1/8" Hose Barb732-87660 8766 Adapter, 1" FPT x 3/4" Hose Barb732-87700 8770 Adapter, 1" FPT x 1" Hose Barb732-87720 8772 Adapter, 1" FPT x 1-1/4" Hose Barb732-87730 8773 Adapter, 1" FPT x 1-1/2" Hose Barb732-87760 8776 Adapter, 1-1/4" FPT x 1" Hose Barb732-87820 8782 Adapter, 1-1/4" FPT x 1-1/2" Hose Barb

For more information see: www.marineeast.com

PLUMBING & FITTINGS• Molded of high-strength engineered plastic • Cuts installation time

& labour • All threads are standard tapered pipe

732-89000

732-88000

732-87000

732-87300

732-87500

732-89900

Note: Measurements reflect inner hose diameter

758

PLUMBING FITTINGS


BULKHEAD CONNECTORS• Ideal for hose, cable or wires

• Molded of high-strength engineering plastic for long term durability

• Designed to reduced hose and cable chafing


732-79000 7900 Bulkhead Connector, 1-1/2", Black, Long732-79100 7910 Bulkhead Connector, 1-1/2", Black, Short732-79800 7980 Bulkhead Connector, 3/4", Black732-79900 7990 Bulkhead Connector, 5/8", Black

HOSE BARBS• Provide tight fit without electrical bonding• Fits marine sanitation hose • Molded of high-impact nylon• Threads have been precision molded fo proper fit• Resists electrolysis


732-80010 8001 Hose Barb, 5/8" Hose, 1/2" MPT732-80020 8002 Hose Barb, 3/4" Hose, 3/4" MPT732-80030 8003 Hose Barb, 1" Hose, 1" MPT732-80050 8005 Hose Barb, 1-1/2" Hose, 1-1/2" MPT732-80100 8010 Hose Barb, 5/8"Hose, 3/4"FPT

100˚ ANGLED ELBOWSMAXXFLOW™ DRAINS

• 100º Angled elbow allows complete drainage & eliminates chances of clogging• Low profile design maximizes uses• Fits marine sanitation hose• Molded of rugged nylon for strength & durability


732-80320 8032 Elbow, 100º, 1" Hose I.D. x 1"MPT, Short Thread, Male-Barb732-80340 8034 Elbow, 100º, 1" Hose I.D. x 1" Hose, Barb-Barb732-80570 8057 Elbow, 100º, 1-1/2" Hose I.D. x 1-1/2"MPT, Short Thread, Male-Barb732-80580 8058 Elbow, 100º, 1-1/2" Hose I.D., x 1-1/2"FPT, Female to Barb

ANGLED “T” FITTINGS & DRAINS• 5º angle assures maximum drainage• Fits marine sanitation hose


732-80700 8070 Angled "T" Fitting, 1-1/2" Barbed732-80800 8080 Angled "T" Fitting, 1-1/2" Barbed w/Threaded End

EXHAUST PORTS• Designed for engines with water cooled exhaust systems

• Optional flap for secure seal

• Molded in nylon


732-81040 8104 Exhaust Port, 4", Black732-81170 8117 3 or 4" Exhaust Port Flap732-81180 8118 3 or 4" Exhaust Port Split Pin

732-79000

732-80320

732-80010

732-80700

732-81040

759For more information see: www.marineeast.com

PLUMBING FITTINGS

TANK VENTS & VENT GRILLS• Allows proper tank venting while preventing fuel contamination• Fits standard 5/8" marine hose• Built-in baffle prevents contamination• Molded of non-corrosive nylon for long-time service and durability


732-30120 3012 Tank Vent, 100º Black

MAXXFLOW™ SHOWER DRAINS• 100º Angled Elbow lessens likelihood of clogging• Flush head fits most standard showers• Fits marine sanitation hose• Flush head allows complete drainage


732-39990 3999 Shower Drain Elbow, Hose 3/4" w/screen732-40490 4049 Shower Drain Elbow, 1" Hose w/short thread732-40540 4054 Shower Drain Elbow, 1" Hose w/long thread732-41150 4115 Shower Drain, Straight, 1-1/2" Hose

GENERAL PURPOSE DRAINS• Low profile head affords excellent drainage• Ideal for both scuppers & deck drains• Fits marine sanitation hose

ORDER NO. Mfr. No. Description732-41110 4111 Scupper Drain, 1-1/2" Hose Long Thread

w/ crosshairs

MAXXFLOW™ ANGLED & STRAIGHT DRAINS• Flush head allows complete drainage• Fits sanitation hose• Assembly includes nut• 100º angled (elbow drains) drain considerably faster

than 90º elbows


732-63220 6322W Elbow Drain, 1-1/8" Hose, w/screen, White732-67720 6772W Straight Drain, 1-1/2" Hose ,w/screen, White

FIRE PORTS™ENABLES CREW TO DETECT ENGINE FIRES QUICKLY

& EXTINGUISH THEM SAFELY• Gives you the opportunity to eliminate, or at least control, the

situation until help can arrive• Allows you to visually inspect an engine compartment without opening

it & adding oxygen to the fire


732-68000 6800 Fire Extinguisher Port, Engine Box, 2.7" dia.- I/O & Inboard

732-69900 6990 Fire Extinguisher Port, Clear w/Ring, 2.7" dia.& Sticker - I/O & Inboard


732-30120

732-39990

732-41110

732-6322W

732-68000

760For more information see: www.seatechinc.com

PLUMBING FITTINGS

BK105 TILT BIN STARTER KITORDER NO.135-10500 Mfr. No. BK105

Kit Contains:

35 SERIES 1/2" CTS (COPPER TUBE SIZE) FITTINGS - Lead FreeSea Tech 35 Series products are designed and manufactured to be trouble free for many years of service life. 35 Series products are designedand manufactured in Polysulfone, a high performance thermal plastic material. The majority of 35 Series products are approved and certifiedto NSF-61, NSF-14, CSA B137.5, ASTM F877, and IAPMO ASSE 1061-2006 and to the Uniform Plumbing Code (U.P. Code). 35 Seriesproducts are available in standard imperial inch sizes and interconnect with all Sea Tech 24 Series fittings. The Sea Tech quick connect designallows for quick and easy connections without installation tools. Simply cut the plastic, copper or CPVC piping and snap a Sea Tech fitting inplace for a zero-leak connection.

Fitting Performance Rating: Operating Pressure: Vacuum to 250psi Max Temperature: 180˚F @ 100psi 75˚F @ 250psiNote: Lead Free - The wetted surface of this product contacted by consumable water

contains less than one quarter of one percent (0.25%) of lead by weight.

ORDER NO. Mfr. No. Description Qty In Kit

135-23100 013523-10 Union Tee, 1/2" CTS 5/ea

135-33100 013533-10 Stackable Tee, 1/2" CTS 5/ea

135-34100 013534-10 Stackable Branch Tee, 1/2" CTS 5/ea

135-17100 013517-10 Union Elbow, 1/2" CTS 5/ea

135-18100 013518-10 Stackable Elbow, 1/2" CTS 5/ea

135-15100 013515-10 Union Connector, 1/2" CTS 5/ea

135-161004 013516-1004 Reducing Union, 1/2" CTS x 1/4" O.D. 5/ea

135-161008 013516-1008 Reducing Union, 1/2" CTS x 3/8" CTS 5/ea

135-131008 013513-1008 Hose Barb Fitting, 1/2" CTS x 1/2" H.B. 5/ea

135-10108 013510-1008 Female Connector, 1/2" CTS x 1/2" NPS 5/ea

135-20108 013520-1008 Female Swivel Elbow, 1/2" CTS x 1/2" NPS 5/ea

135-11008 013501-1008 Male Connector, 1/2" CTS x 1/2" NPT 5/ea

135-011012 013501-1012 Male Connector, 1/2" CTS x 3/4" NPT 5/ea

135-19108 013519-1008 Male Elbow, 1/2" CTS x 1/2" NPT 5/ea

135-211008 013521-1008 Drop Ear Elbow, 1/2" CTS x 1/2"NPT 5/ea

135-39100 013539-10 Stop Valve, 1/2" CTS 5/ea

135-40100 013540-10 Union Check Valve, 1/2" CTS 5/ea

135-43104 013543-1004 Reducing Stackable Valve, 1/2" CTS x 1/4" O.D. 5/ea

135-45100 013545-10 End Stop, 1/2" CTS 5/ea135-47100 013547-10 Collet Clip, 1/2" CTS, (3 per pack) 5/ea115-00500 B500 5 Bin Section for 3/8" & 1/2" Fittings (Empty) 4/ea

BHS100 22" X 8" Display Header Sign 1/ea

BSP100 Bin System Sample Part 1/ea

BLK100 Tilt Bin Labels 1/ea

• Quick connect fittings for Pex, Copper, CPVC and Polybutylene Tubing• Buy a complete kit or order components separately to design your design• Choose from 3/8”, 1/2” and 3/4” CTS and 15MM fittings• All parts tagged with UPC colour tags : Orange for 3/8"

Blue for 1/2" and 15 MMGreen for 3/4"

STARTER KITS

* Kit comes packaged in bins withUPC labels, display header sign,and sample part ready for display

*Note: Also available ORDER NO. 135-00100 Mfr. No. BK100 BK100 Tilt Bin Starter Kit, 3/8" & 1/2" CTS FittingsORDER NO. 135-00200 Mfr. No. BK200 BK200 Tilt Bin Starter Kit, 1/2" & 3/4" CTS FittingsORDER NO. 135-00205 Mfr. No. BK205 BK205 Tilt Bin Replacement Kit, 1/2" CTS Fittings

BK105 TILT BIN STARTER KIT


PLUMBING FITTINGS


BK400 TILT BIN STARTER KIT – 15MM & 1/2" CTS FittingsORDER NO. 115-00400 Mfr. No. BK400

Kit Contains:


15MM Fittings

111-00815 011110-0815 Female Connector, 15MM x 1/2” NPS 5/ea

111-51515 011115-1515 Union Connector, 15MM 5/ea

111-61015 011116-1015 Reducing Union, 15MM x 1/2” CTS 5/ea

111-71515 011117-1515 Union Elbow, 15MM 5/ea

111-81515 011118-1515 Stackable Elbow, 15MM 5/ea

112-00815 011120-0815 Female Connector Elbow, 15MM x 1/2” NPS 5/ea

112-31515 011123-1515 Union Tee, 15MM 5/ea

103-31515 011133-1515 Stackable Tee, 15MM 5/ea

114-51500 011145-15 End Stop, 15MM 5/ea

114-71500 011147-15 Collet Clip, 15MM, (3 Per Pack 5) 5/ea

240-20815 012402-0815 Male Connector, 15MM x 1/2” NPT 5/ea

241-30815 012413-0815 Hose Barb Fitting, 15MM x 1/2” H.B. 5/ea

243-90415 012439-0415 Reducing Stop Valve, 15MM x 1/4” OD 5/ea

243-91515 012439-1515 Stop Valve, 15MM 5/ea

24 Series

124-011008 012401-1008 Male Connector, 1/2” CTS x 1/2” NPT 5/ea

124-101008 012410-1008 Female Connector, 1/2” CTS x 1/2” NPS 5/ea

124-41510 012415-10 Union Connector, 1/2” CTS 5/ea

124-17100 012417-10 Union Elbow, 1/2” CTS 5/ea124-18100 012418-10 Stackable Elbow, 1/2” CTS 5/ea124-201008 012420-1008 Female Connector Elbow, 1/2” CTS x 1/2” NPS 5/ea

124-23100 012423-10 Union Tee, 1/2” CTS 5/ea

124-33100 012433-10 Stackable Tee, 1/2” CTS 5/ea

135-39100 013539-10 Stop Valve, 1/2” CTS 5/ea

124-45100 012445-10 End Stop, 1/2” CTS 5/ea

135-47100 013547-10 Collet Clip, 1/2” CTS, (3 per pack ) 5/ea

115-00500 B500 5 Bin Section for 3/8" & 1/2" Fittings (Empty) 4/ea




* Kit comes packaged in bins with UPC labels, display header sign, and sample part ready for display

24 SERIES 1/2” CTS FITTINGS - Lead FreeSea Tech 24 Series quick connect products are produced from FDA approved materials certified and approved to NSF-61 standards and aresuitable for contact with drinking water. 24 Series products are designed and manufactured in a bright white thermal plastic and are applicablefor many applications including Water Plumbing, Car Wash, Water Filtration and Aquariums. 24 Series fittings are produced in standard imperialinch sizes and interconnect with all Sea Tech 35 Series connections. Sea Tech 24 Series fittings directly connect to a variety of plastic, copperand CPVC piping. Simply cut the piping and snap a Sea Tech quick-connect fitting into place for a leak free connection.Fitting Performance Rating: Operating Pressure: Vacuum to 250psi

Max Temperature: 140˚F @ 100psi / 75˚F @ 250psi


PLUMBING FITTINGS


BK300 TILT BIN STARTER KIT35 SERIES – 3/8", 1/2" AND 3/4" CTS Fittings (Lead Free)

Order No. 135-00300 (Complete Kit) Mfr. No. BK300Kit Contains:




135-141008 013514-1008 Reducing Stem, 1/2” CTS x 3/8” CTS 5/ea


135-161008 013516-1008 Reducing Union, 1/2” CTS x 3/8” CTS 5/ea

135-17080 013517-08 Union Elbow, 3/8" CTS 5/ea

135-18080 013518-08 Stackable Elbow, 3/8" CTS 5/ea

135-200808 013520-0808 Female Connector Elbow, 3/8" CTS x 1/2" NPS 5/ea

135-23080 013523-08 Union Tee, 3/8” CTS 5/ea

135-47080 013547-08 Collet Clip, 3/8” CTS, 3 per pack 5/ea

124-141004 012414-1004 Reducing Stem 1/2” CTS x 1/4” OD 5/ea


135-011014 013501-1014 Male Connector, 1/2” CTS x 3/4” MGHT 5/ea


135-131008 013513-1008 Hose Barb Fitting, 1/2” CTS x 1/2” H.B. 5/ea


135-17100 013517-10 Union Elbow, 1/2” CTS 5/ea

135-18100 013518-10 Stackable Elbow, 1/2” CTS 5/ea

135-20108 013520-1008 Female Swivel Elbow, 1/2” CTS x 1/2” NPS 5/ea135-211008 013521-1008 Drop Ear Elbow, 1/2” CTS x 1/2” NPT 5/ea135-23100 013523-10 Union Tee, 1/2" CTS 5/ea

135-33100 013533-10 Stackable Tee, 1/2” CTS 5/ea

135-39100 013539-10 Stop Valve, 1/2" CTS 5/ea

135-45100 013545-10 End Stop, 1/2" CTS 5/ea

135-47100 013547-10 Collet Clip, 1/2" CTS, 3 per pack 5/ea

135-011412 013501-1412 Male Connector, 3/4” CTS x 3/4" NPT 5/ea


135-141410 013514-1410 Reducing Stem, 3/4” CTS x 1/2” CTS 5/ea


135-17140 013517-14 Union Elbow, 3/4” CTS 5/ea

135-18140 013518-14 Stackable Elbow, 3/4” CTS 5/ea

135-23140 013523-14 Union Tee, 3/4” CTS 5/ea

135-241410 013524-1410 Reducing Tee, 3/4” CTS x 1/2” CTS 5/ea

135-47140 013547-14 Collet Clip, 3/4” CTS, 3 per pack 5/ea

115-00500 B500 5 Bin Section for 3/8", 1/2", Fittings (Empty) 6/ea

115-04000 B400 4 Bin Section for 3/4" Fittings (Empty) 1/ea





PLUMBING ACCESSORIES

SEA TECH TUBING

ELBOW CLIP1/2” CTS or 15MMORDER NO. 123-49150 Mfr. No. 2349-15

PIPE CLIP1/2” CTS or 15MM , 2 per packORDER NO. 123-70155 Mfr. No. 012370-1557

TUBE CUTTERORDER NO. 115-81522Mfr. No. 1158-1522

REPLACEMENT BLADEORDER NO. 116-11522Mfr. No. 1161-1522

135-35850

135-25850

135-15850

PEX TUBING – LEAD FREETubing Performance Rating:Operating Pressure: Vacuum to 160psiMax Temperature: 180°F @ 100psi

72°F @ 160psi

ORDER NO. Mfr. No. Description135-15850 00B5850 1/2” CTS (5/8” O.D.) Blue135-25850 00R5850 1/2” CTS (5/8” O.D.) Red135-35850 00W5850 1/2” CTS (5/8” O.D.) White

METRIC TUBINGTubing Performance Rating:Operating Pressure: Vacuum to 160psiMax Temperature: 180°F @ 100psi

72°F @ 160psi

ORDER NO. Mfr. No. Description110-15501 001550B 15MM Blue110-15502 001550R 15MM Red

Sea Tech tubing is produced from a high performance, cross-linked Polyethylenematerial. Sea Tech tubing is NSF listed,

FDA recognized and available in multiple colors for ease of water line identification.50’ Coil in dispensing box.

TUBING ACCESSORIES

764

BASKET TRANSPARENT SPARE FITS INTAKESTRAINER CYLINDER GASKET KIT * STRAINERNo. 99 D No. 99 C No. 99 M

ORDER NO. ORDER NO. ORDER NO. ORDER NO. Pipe Size493-04994 493-04993 621-04935 621-49304 1/2"493-05994 493-05993 621-04935 621-49305 3/4"493-06994 493-06993 621-04937 621-49306 1"493-07994 493-07993 621-04937 621-49307 1-1/4"493-08994 493-08993 621-04939 621-49308 1-1/2"493-09994 493-09993 621-04939 621-49309 2"493-10994 493-10993 621-04939 621-49310 2-1/2"

*Cork Spare Gasket Kit consists of1 - Cover Gasket and, 2 - Cylinder Gasket

REPLACEMENT PARTS FORINTAKE WATER STRAINER

PIPE HEIGHT WIDTH DIMENSIONS DIMENSIONS OPEN AREA SPARE GASKET KIT*SIZE OVERALL OVERALL ORDER NO. CYLINDER BASKET TO PIPE ORDER NO.INCHES INCHES INCHES INCHES INCHES SIZE RATIO

1/2 5-3/4 4-1/2 621-49304 3-1/2 x 4 1-13/16 x 4-3/8 30:1 621-049353/4 8-3/8 4-1/2 621-49305 3-1/2 x 6 1-13/16 x 6-1/4 25:1 621-049351 9-1/2 5-1/2 621-49306 4-1/2 x 5-1/2 2-5/8 x 5-7/8 20:1 621-049371-1/4 10 5-1/2 621-49307 4-1/2 x 6 2-5/8 x 6-1/4 13:1 621-049371-1/2 11-1/2 7-1/4 621-49308 6 x 8 3-5/16 x 8-7/16 17:1 621-049392 16 7-1/2 621-49309 6 x 12 3-5/16 x 12-1/4 13:1 621-049392-1/2 16 7-1/2 621-49310 6 x 12 3-5/16 x 12-1/2 10:1 621-04939

PIPE HEIGHT WIDTH DIMENSIONS DIMENSIONS OPEN AREA SPARE GASKET KIT*SIZE OVERALL OVERALL ORDER NO. CYLINDER BASKET TO PIPE ORDER NO.INCHES INCHES INCHES INCHES INCHES SIZE RATIO

2 14-1/2 9 621-50090 8 x 10 3-7/8 x 10-1/4 20:1 621-500092-1/2 16-1/2 9 621-50100 8 x 12 3-7/8 x 12-1/4 18:1 621-500093 18-1/2 9 621-50110 8 x 14 3-7/8 x 14-1/4 14:1 621-50009

*Spare Gasket Kit Consists of: 1 - Cover Gasket and, 2 - Cylinder Gaskets.

ORDERING INFORMATION FOR FIG. 0500

ORDERING INFORMATION FOR FIG. 0493

For more information see: www.perko.com

Fig. 0500Fig. 0493

FIGS. 0493 & 0500 - CAST BRONZEPERKO Water Strainers are Designed for Easy Installation and Cleaning. Features Include Mounting Lugs Cast into Both Sides to AssureUniversal Mounting, Four Outside Tie Rods and a 304 Stainless Steel Strainer Basket to Minimize Electrolysis. Hinged Lugs for the Cast

Bronze Cover Permit Easy Removal and Cleaning of the Strainer Basket. A Drain Plug in the Bottom Casting is Provided for Easily RemovingSediment and Draining for Winterizing.

For Applications Requiring Higher Capacity See Fig. 0500 Below

INTAKE WATER STRAINERS

Documents

CC Marine 2013-14 Catalogue_Pumps