CCTR- 8 11 Vehicle GPS T racker

CCTR-811 Vehicle GPS TrackerWelcome to use Real Time GPS tracker CCTR-811, This product is with GPS module and GSM

module, It has many new and unique functions, the basic function is: real time uploading current location

to server, display history tracking on website, listen & monitor sound around the tracker, break geo-fence

(in or out area) alarm, over speed alarm, power down alarm etc. Also it has email & SMS sending alarm

function, move alarm & shock alarm, SMS locating with internet link map or text description location or

Longitude & latitude , and the other function are also very especial, such as small & thin metal case for

easy installation, external GPS & GSM antenna for better signal, built in shock sensor to control power

saving, built in rechargeable Li-battery life is 1-2 days (standby mode), emergency SOS help, etc. Some

function can be used without platform (SMS located, over speed alarm, move alarm, shock alarm etc.)

With GPS and GSM, the tracker sends the present location information through GPRS to internet

server, so that user visit the website www.999gps.com with the given user name and password through

any computer with internet, and without downloaded any software. And it can help to arrange the whole

fleet or the vehicles of company or group or personal vehicles with the anti-hijack function.

Call the tracker or send SMS to the tracker also can trigger the tracker send back location with

internet link map or text description location or Longitude & latitude by SMS.

And also user use mobile phone visit website: www.999gps.mobi with the vehicle name and check

password (defined in the Terminal management), the last location information & location map will display

on your mobile phone.

It can be used as tracking cars, company vehicles, buses, taxis, trucks, outside workers, moving

equipments, transportations etc.

Tracking Platform: www.999gps.com

Demo user name: 123456 , Password: 123456 .

NoteNoteNoteNote：ThisThisThisThis manualmanualmanualmanual cancancancan bebebebe downloadeddownloadeddownloadeddownloaded onononon thethethethe platform,platform,platform,platform, afterafterafterafter logonlogonlogonlogon thethethethe platformplatformplatformplatform ((((UUUUserserserser cancancancan

useuseuseuse personalpersonalpersonalpersonal useruseruseruser namenamenamename &&&& passwordpasswordpasswordpassword totototo logon,logon,logon,logon, alsoalsoalsoalso demodemodemodemo useruseruseruser name:name:name:name: 123456123456123456123456 &&&& password:password:password:password: 123456123456123456123456

cancancancan bebebebe usedusedusedused totototo logon),logon),logon),logon), clickclickclickclick thethethethe menumenumenumenu ““““DownDownDownDown filefilefilefile”””” onononon thethethethe rightrightrightright toptoptoptop cancancancan downloaddownloaddownloaddownload thethethethe latestlatestlatestlatest versionversionversionversion

ofofofof thethethethe platformplatformplatformplatform operationoperationoperationoperation manualmanualmanualmanual &&&& andandandand trackertrackertrackertracker operationoperationoperationoperation manual,manual,manual,manual, itititit hashashashas WordWordWordWord &&&& PDFPDFPDFPDF version,version,version,version,

pleasepleasepleaseplease seeseeseesee thethethethe description,description,description,description, thethethethe manualmanualmanualmanual isisisis onlyonlyonlyonly suitsuitsuitsuit forforforfor thethethethe trackertrackertrackertracker whichwhichwhichwhich manufacturemanufacturemanufacturemanufacture datedatedatedate isisisis latelatelatelate

thanthanthanthan thethethethe description,description,description,description, pleasepleasepleaseplease notenotenotenote this,this,this,this, thethethethe oldoldoldold versionversionversionversion pleasepleasepleaseplease contactcontactcontactcontact us.us.us.us.

http://www.999gps.com

http://www.999gps.mobi


Parts List & Description

Before Using

1. Install SIM card

Press the yellow switch button on one side of the tracker main unit with a tool, the SIM card

holder will come out. Pull it out and put the SIM card in the holder and then push the holder into the

tracker again (Pay attention: the SIM card metal contact pin can not face down to the holder, please

see the picture) , if the SIM card is not installed properly, the green LED on the tracker will keep ON,

an the tracker can not work properly.

Note: 1. This tracker use 2G GSM network, and it upload tracking only through GPRS, it can not

work in CDMA network or 3G network. (Some 3G SIM card can use 2G GSM network,

this kind of SIM card can be used in the tracker)

2. Please confirm the GPRS function is enabled, and the APN has been set, some network

also need set GPRS user name & password. (Call the mobile company to confirm)

2. Power ON / OFF

� When power is OFF, install the battery in or connect the power wire to 12V or 24V, the tracker will

power on automatically.

� When the battery voltage in the tracker is too low, the tracker will power off automatically.

3. LED flash indicator

GREEN LED Flash once : GSM & GPS working well

GREEN LED Flash twice : GSM working well and no GPS signal

GREEN LED Flash three times : GSM & GPS working well but battery low

GREEN LED Flash four times : GSM working well, battery low and no GPS signal

GREEN LED ON continuously : GSM searching network

GREEN LED OFF continuously : Power off

GREEN LED Flash fast : Incoming a call or sending SMS

RED LED Flash once : Uploading current tracking

RED LED Flash twice : Can not upload tracking now

4. Recharge and power supply

� For CCTR-811, the tracker only uses the 9-32V DC power supply, too high voltage or AC voltage

may damage the tracker or even cause accidents, it is necessary connecting to car battery all the

time, after the backup battery is full, the built in recharging circuit will stop recharging, and if the

tracker is not move, the tracker will go to sleep, then the tracker will cost few power and will not

make the car battery can not start car engine.

RED or BROWN----------12V/24V car battery

BALCK------GND (Car Body)

YELLOW----Cut Relay Driving (Immobilizer Control)

GREY-------External SOS button

GREEN-------ON/ACC signal (if open the uploading will controlled by shock sensor)

5. Reset to default Configuration (Factory configuration)

Send SMS "RESET*123456" to the tracker, the tracker will repower on and reset all the

configuration to default.

Notes: After reset to default set, all IP / APN / GPRS / TIME ZONE setting are deleted and back

to default, all preset phone number are deleted and password change to 123456, all the alarm setting

is canceled, if you changed these before, then after reset the tracker, you need set these again by

sending SMS.

6. ANTENNA

� The Antenna of GSM and GPS are external , when install the antenna, please confirm the system

can work well.

� Pleas leave the tracker away from big metal, this will reduce the GSM and GPS signal, and the

GPS antenna need face to the heaven.

7. Shock Sensor and ON/ACC signal Control GPS ON/OFF and Power Saving

This tracker built in shock sensor, default is SHOCKCONTROL mode, when the tracker begin

to move, the tracker will turn on GPS and upload location automatically, when the tracker keep

stop moving 2 minutes, the tracker will turn off GPS & GPRS automatically (Stop uploading

location), this can make the battery life longer and save GPRS data charge.

Also the uploading tracking can be controlled by ON /ACC signal, when the ON / ACC signal

is high, the tracker will turn on GPS and upload location automatically, when the ON / ACC

signal is low, the tracker will turn off GPS & GPRS automatically (Stop uploading location), if this

signal wire is open and not connect to any signal , the uploading tracking is controlled by shock

sensor.

8. Using Condition

The working temperature is -20 0C to 60 0C, over this range the specification maybe can not reach

the standard level, the storage temperature can reach to -40 0C to 80 0C.

Fast Using Guide

1. First to buy a 2G GSM phone SIM card, which needs SMS service and incoming caller ID

display and GPRS function(GPRS is used for upload tracking to server, Caller ID display is used for

listen sound in car), and please disable the PIN code of the SIM card, this SIM card phone number is

the tracker number and all the operations (calling and sending SMS) to the tracker is this number.

2. After install the SIM card to tracker, connect to the car battery, the tracker will power on

automatically (When the battery power used out, recharging the backup battery maybe delay the first

locating 5-30 minutes).

3.Send SMS to tracker to set APN name and GPRS user name & password first (please call your

mobile phone company to confirm your SIM card APN and GPRS user name & password, some SIM

card are not necessary to set the GPRS user name or password).

4. Please confirm the tracker can receive the GPS signal and GSM signal (you should in the

outdoor to get GPS signal, Green LED will flash once or third every 4 seconds means GSM and GPS

signal well), when the tracker begin to move or the ON / ACC signal is enabled, the tracker will upload

the location to the platform: www.999gps.com .

5. Platform user name and password is the last 6 digital number of the tracker’s ID number, the

S/N number is print on the back of the device, this number is the ID number, also user can send SMS

“ID*password” (Tracker default password is 123456) to the tracker to check the ID number, user can

change the password and user information, our administrator can change the user name by user

request (ask your dealer to contact us), User login the website can see the current location on the

Google map, also user can display the history tracking in the specified date and time and other

operation.

For Example : S/N : CW9999C00019411

Then User name on platform is: 019411

Password is :019411

6. Also user use mobile phone visit website: www.999gps.mobi with the vehicle name and check

password (defined in the Terminal management), the last location information & location map will

display on your mobile phone.

7. User call the tracker or send SMS to tracker also can trigger the tracker to send back the

location in text description or google map website link by SMS (Send TEXTLOCATE*123456 or

LINKLOCATE*123456 to tracker).

8. If you have several trackers, fleet management user can be created by us, the user can see all

the trackers after login, this can be used as fleet management, ask your dealer to contact us to get

your fleet management user name and password.

9. The default data & time of the tracker upload to the website is GMT time (Greenwich Mean Time,

add or minus a fixed digit is your local time), you can send a SMS to the tracker to change the time to

your local time,(“TIMEZONE*123456*XYZ”, XYZ is from -13 to +13, for example: Newyork is -05, Paris

is +01,Tokyo is +09).

10. If you use your own server, please send SMS “IP*123456*youripaddressandport” to the


http://www.999gps.mobi

tracker to change the server IP and port.

SMS Instruction Description

Check Tracker ID Number :

The tracker ID is print on the label of the tracker, the S/N number on the label is the ID, Also if the

label is missing, send SMS “ID*123456” to tracker, in which, “ID” is the fixed command and

“123456”is the password. Having successfully been made, there will be a SMS “ID:

CW9999C12345678901”, in which, “CW9999C12345678901” is the ID and every tracker

corresponds to the only number. This number is used to differ the tracking uploaded to the website

from others. the last 6 digital number of the tracker ID is the user name and password of the tracker

on the platform, for example the tracker ID is : CW9999C12345678901, and then the user name on

the platform of this tracker is : 678901, and the platform password for this user name also

is :678901,user can login the platform to change the password.

Set the Time Zone of Local Time:

The data & time of the tracker upload to the website is GMT time (Greenwich Mean Time, add or

minus a fixed digit is your local time), you can send a SMS to the tracker to change your upload time

from GMT to your local time automatically, Send SMS “TIMEZONE*123456*XYZ” to the tracker, in

which, “TIMEZONE” is the fixed command, “123456” is the password and XYZ is the time zone of your

local time, it is from -12 to +13, for example: Newyork is -05, Paris is +01. Having successfully been

set , there will be a SMS “TIME ZONE XYZ”.

Notice: please confirm your local time zone, and if the time zone is not set, the tracker will upload

tracking with GMT time (Greenwich Mean Time).

Set Website Server IP :

Send SMS “IP*123456*113.106.89.149,9066” to the tracker, in which, “IP” is the fixed command,

“123456” is the password and “113.106.89.149,9066” is the IP address of the our server. Having

successfully been set , there will be a SMS “IP: 113.106.89.149,9066”. However, the IP address may

be changed with the upgrade of our service so please see to the notices on our website or to inquire

the agents.

Notice: The tracker default IP address is : “113.106.89.149,9066”, it is not necessary to set again,

unless our IP address has been changed or you change it to your own server, If the default IP is

changed, we will notice on the website.

Set APN name:

For some mobile phone SIM card, there must be to set the APN name to get through the internet

by GPRS. Send SMS “APN*123456*apnname” to the tracker, in which, “APN” is the fixed command,

“123456” is the password and “apnname” is the APN name of a mobile phone company. Having

successfully been made, there will be a SMS “APN: apnname”.

Notice: Some mobile company is not necessary to set APN or GPRS user name & password, please

contact your mobile company to confirm this, or get APN and GPRS user name & password from your

mobile phone company that the tracker used.

Set GPRS User Name & Password:

Send SMS “USERNAME*123456*username*password” to the tracker, “USERNAME” is a

command, “123456” is the password of the tracker; “username” is the mobile company GPRS user

name, “password” is the mobile company GPRS password, if the operation is success, the tracker

will send back the information “Username:username, Password:password”, please call the mobile

phone service hotline to get the GPRS username and password, some mobile company do not need

set the GPRS username and password. if the password is not right, the operation is fault, the tracker

will send back information “Wrong Password”

Note: before upload the tracking user need set IP, APN, GPRS user name & password (2G GSM

network APN, GPRS name &password, 3G network is not suit for this tracker), these only need set

once, and will be saved in the tracker. But if the tracker is back to default, then these setting need be

set again.

Add / Delete / Check preset number:

The preset phone number is used to send alarm information by SMS, or use mobile phone to locate

the tracker without platform, if the preset phone number is not set, then the alarm information can not

send to user by SMS (battery low, SOS, etc).

1. Add preset phone number by SMS

Send SMS“ADDPHONE*123456*A*number”(Not including the quotation marks “ ”, Number

means the telephone number you want preset, the following is same) to tracker is OK, “ADDPHONE”

is a command; “123456” is password; “A” is preset number location, every tracker have 3 preset

phone number locations, A and B, and C, so you can preset 3 phone numbers, if the add operation is

success, the tracker will send back the information ”Add Preset Phone OK”, if the password is not right,

the operation is fault, the tracker will send back information “Wrong Password”.

2. Delete preset phone number by SMS

Send SMS “DELETEPHONE*123456*A” to the tracker, “DELETEPHONE” is a command;

“123456” is password; “A” is preset phone number location, there are 3 locations “A” and “B” and “C”;

if the delete operation is success, the tracker will send back the information ”Delete Preset Phone OK”,

if the password is not right, the operation is fault, the tracker will send back information “Wrong

Password”.

3. Check preset phone number by SMS

Send SMS “CHECKPHONE*123456” to tracker, “CHECKPHONE” is a command; “123456” is

password; if the operation is success, the tracker will send back the information “Preset Phone A:

13322990998； B：13316868198；C：13322990033 , the phone number is just an example. if the

password is not right, the operation is fault, the tracker will send back information or “Wrong

Password”.

Change / Check Password

1. Change tracker password

Send SMS “CHANGEPASSWORD*123456*888888” to tracker, “CHANGEPASSWORD” is a

command; “123456” is old password; “888888” is new password; if the operation is success, the

tracker will send the information “ New Password： 888888” to every preset phone number, if the

password is not right, the operation is fault, the tracker will send back information “Wrong Password”.

Note: Only preset phone can change the password.

2. Check tracker password

Send SMS “CHECKPASSWORD” to the tracker, “CHECKPASSWORD” is a command, if the

operation is success, the tracker will send back the information “Password：888888”; “888888”is an

example.

Note: Only preset phone can check the password.

Locate Triggered by Calling :

Using preset phone call the tracker, after ring 3 times, the tracker will hang up the call automatically

and locate immediately, 10 seconds later, the tracker will send back the SMS location information

(map website link) of current location to the caller. user use mobile phone to click the website link to

visit internet, and the location on map will display on the mobile phone(the phone SIM card need

enable the GPRS function). If the tracker has not preset number, any phone call can trigger the

tracker to locate immediately, if the tracker has preset number, then only preset phone call can trigger

the tracker to locate immediately.

the SMS information sample is as follow:

http://www.google.com/map.aspx?lat=40.756441&lng=-73.986378&l=en

Battery:91%

After Click the above link to visit website, the map will display on your mobile phone.

Send a SMS to trigger tracker sending back map link by SMS

Send SMS “LINKLOCATE*123456” to the tracker, “LINKLOCATE” is a command, “123456” is

password; the tracker will locate immediately and send back the location information (map website

internet link) of current location to the caller. use mobile phone to click the website link to visit internet,

and the location will display on the map on your phone(the smart phone SIM card need enable the

GPRS function), if the password is not right, the operation is fault, the tracker will send back

information “Wrong Password.

Send a SMS to trigger tracker sending back text description location by SMS

Send SMS “TEXTLOCATE*123456” to the tracker, “TEXTLOCATE” is a command, “123456” is

password; the tracker will locate immediately and visit internet to get location in text description, and

then send back the location information in text description to the operator.

The SMS information sample is as follow:

http://www.followmegps.mobi/map.aspx?lat=40.756441&lng=-73.986378&l=en

Set Text Locate Reply Language

Send SMS “LANGUAGE*123456*XY” to the tracker, “LANGUAGE” is a command, “123456” is

password, “XY” is language symbol; the tracker will set the text locate reply language to the specify

language, then later every time text locate will reply the location in this language, If the password &

command is not right, the operation will fault.

The following is the symbol of the language:

Symbol Language Symbol Language

zh Chinese en English (Default)

zh-tw Taiwan / HK en-us English(US)

zh-sg Singapore en-gb English(UK)

fr French en-au English(Australia)

fr-be French(Belgium) en-ca English(Canada)

de German en-nz English(New Zealand)

ja Japanese en-ie English(Ireland)

es Spanish

pt Portuguese

The default language is English.

Send a SMS to trigger tracker sending back longitude & latitude location by SMS

Send SMS “SMSLOCATE*123456” to the tracker, “SMSLOCATE” is a command, “123456” is

password; the tracker will locate immediately and then send back the location information in

longitude & latitude to the operator, The sixth line is the tracker battery capacity, if the battery is lower

than 10%, tracker will send battery low information to preset phone number

The SMS information sample is as follow:

Latitude:22.680206N

Longitude:114.146998E

Speed(km/h):45.0

Direction(Degrees):303.30

GMT:2008/04/25 08:29:06.000

Battery:91%

The first & second line are the latitude of the tracker.

The third line is the speed of the tracker

The fourth line is the direction of the tracker(from the north it is 0, and the east is 90, and the

south is 180, and the west is 270, full circle is 360, it is clockwise).

The fifth line is the GMT time and date.

Over Area Alarm:

Send “SETAREA*123456*XY” SMS to the tracker, “SETAREA” is a command, “123456” is password,

“XY” is the radius of the circle area, unit is km, the center of the circle is the tracker current location

when receiving this command, if the current location can not be located, the operation fail. For

example XY is 03, it means the area is a circle with the radius is 3km, and the center of the circle is the

current location.

After set the over area alarm, the tracker will locate immediately, and set the current location as

the center of the circle, and later every 5 minutes the tracker will check the location is in the preset

circle area or not, if the tracker go out the area, then the tracker will send SMS to the phone who

enable the alarm.

The over area alarm SMS information is as follow:

OverArea


User click the link can display the current location.

Also this function can be set by platform, but the platform over area alarm is different with this

command, the platform over area alarm only alarm on the platform, the platform will not send SMS to

user, and these 2 over area alarm settings are separated.

After send alarm information 3 times, the alarm setting will be canceled, and later the tracker will

not alarm again unless user set the alarm again.

Move Alarm:

Send SMS “SETMOVE*123456” to tracker, “SETMOVE” is a command, “123456” is password,

the tracker will send back the information “Set Move Alarm OK” or “Set Move Alarm Fail” to indicate

the operation is success or failed. if the current location can not be located, the operation fail.

After set the move alarm, the system will locate immediately, and set current location as the

center of the circle, the radius is 200 meters, circle a area, every 5 minutes the tracker will locate and

check the location is in the circle area or not, if the tracker go out the area, then the tracker will send

SMS to the phone who enable the alarm.


The move alarm SMS information is as follow:

Move Alarm





Shock Alarm:

Send SMS “SHOCKALARM*123456” to tracker, “SHOCKALARM” is a command, “123456” is

password, the tracker will send back the information “Set Shock Alarm OK” or “Set Shock Alarm Fail”

to indicate the operation is success or failed.

After set the shock alarm, the system will detect the shock sensor that built in the tracker, if the

car is attacked by others, the shock sensor will be triggered, and the tracker will send SMS to the

phone who enable the alarm.

The shock alarm SMS information is as follow:

Shock Alarm





Over Speed Alarm:

Send SMS “SETSPEED*123456*XYZ” to tracker, “SETSPEED” is a command, “123456” is

password, “XYZ” is the preset report speed, the speed must be 3 digits , from 000 to 999, unit is

Km/hour, the tracker will send back the information “Set Speed OK” or “Set Speed Fail” to indicate

the operation is success or failed.

After set the over speed alarm, the system will locate every 5 minutes and check the speed of the

tracker is higher than the preset speed or not, if the speed is higher than the preset speed, the

tracker will send SMS to the phone who enable the alarm.

The over speed alarm SMS information is as follow:

OverSpeed






Also this function can be set by platform, but the platform over speed alarm is different with this

command, the platform over speed alarm only alarm on the platform, the platform will not send SMS to

user, and these 2 over speed alarm settings are separated.



GPS Signal Alarm:

Send SMS “GPSALARM*123456” to tracker, “GPSALARM” is a command, “123456” is password,

the tracker will send back the information “Set GPS Signal Alarm OK” or “Set GPS Signal Alarm Fail”

to indicate the operation is success or failed.

After set the GPS signal alarm, when the GPS module is working, if the GPS signal is weak, the

GPS module can not locate properly, the tracker will send alarm SMS to the phone who enable the

alarm.

The GPS Signal alarm SMS information is as follow:

No GPS Signal Alarm.

The GPS antenna need face to heaven, in the car some place the GPS signal maybe not very

good, this will make GPS can locate some time, change another place can solve this problem, the

bad connection or human damaged the GPS antenna will trigger the GPS signal alarm.

Listening Monitor sound around tracker

Send SMS “MONITOR*123456*phonenumber” to tracker to listen sound around the tracker,

“MONITOR” is a command, “123456” is password, “phonenumber” is the phone number used to

monitor the tracker, the tracker will call back, pick up the calling and listen the sound.

Also logon the platform, click the “Listen in” menu in the left bottom windows can do the same

operation, please see the operation menu of the platform.

Cancel All Alarm Setting

Send SMS “CANCELALARM*123456” to tracker can cancel all the alarm setting, the

“STOPENGINE” command can be canceled by this SMS, “CANCELALARM” is a command,

“123456” is password, the tracker will send back information “All Alarm Cancel”, and cancel all the

shock alarm setting in the tracker. if the password is not right, the operation is fault, the tracker will

send back information “Wrong Password”.

Set Send Alarm Email Address

Send SMS “EMAILSENDADDR*123456*sendemailaddress” to tracker to set the send alarm

information email address, the “EMAILSENDADDR” is a command, “123456” is password,

“sendemailaddress” is the send alarm email address, for example the send alarm email address is :

[email protected], then this SMS command should be:

“EMAILSENDADDR*123456*[email protected]”. If the password & command is not right, the

operation will fault.

This tracker can send alarm information by sending email, and the tracker need a email address

to send the email, also need a email address to receive the alarm information, the 2 email address

can be the same, also can be different. Email sending need good GMS network, when the tracker is

moving or the GSM signal is not good will make the email sending fail.

PleasePleasePleasePlease checkcheckcheckcheck thethethethe emailemailemailemail suppliersuppliersuppliersupplier totototo confirmconfirmconfirmconfirm thethethethe emailemailemailemail addressaddressaddressaddress cancancancan bebebebe usedusedusedused withwithwithwith smtpsmtpsmtpsmtp modemodemodemode

totototo sendsendsendsend email,email,email,email, andandandand thethethethe smtpsmtpsmtpsmtp serverserverserverserver shouldshouldshouldshould useuseuseuse portportportport 25.25.25.25. ButButButBut ifififif thethethethe smtpsmtpsmtpsmtp serverserverserverserver needneedneedneed securitysecuritysecuritysecurity

connectingconnectingconnectingconnecting (SSL)(U),(SSL)(U),(SSL)(U),(SSL)(U), thenthenthenthen thisthisthisthis emailemailemailemail addressaddressaddressaddress cancancancan bebebebe usedusedusedused forforforfor emailemailemailemail sendingsendingsendingsending (For(For(For(For exampleexampleexampleexample

GmailGmailGmailGmail needneedneedneed enableenableenableenable (SSL)(U),(SSL)(U),(SSL)(U),(SSL)(U), sosososo itititit cancancancan notnotnotnot bebebebe usedusedusedused totototo sendsendsendsend email,email,email,email, butbutbutbut cancancancan bebebebe usedusedusedused totototo receivereceivereceivereceive

email).email).email).email).

Set Send Alarm Email Sending Server

Send SMS “SMTPSERVERNAME*123456*servername” to tracker to set the email sending SMTP

server, the “SMTPSERVERNAME” is a command, “123456” is password, “servername” is the

SMTP server name, the tracker will send back information “Smtp server name: servername”, for

example microsoft live.com email smtp server name is : smtp.live.com, then this SMS command

should be: “SMTPSERVERNAME*123456*smtp.live.com”, if the password & command is not right,

the operation will fault.

Set Send Alarm Email Address Name

Send SMS “EMAILNAME*123456*emailname” to tracker to set the email sending address email

name, the “EMAILNAME” is a command, “123456” is password, “emailname” is the sending email

address email name, for example the sending email address is : [email protected], then this

SMS command should be: “EMAILNAME*123456*[email protected]”. If the password &

command is not right, the operation will fault.

Set Send Alarm Email Password

Send SMS “EMAILPASSWORD*123456*emailpassword” to tracker to set the email sending

address email name, the “EMAILNAME” is a command, “123456” is password, “emailpassword” is

the sending email address password, for example the sending email address [email protected]

mailto:[email protected],

password is :A123456, then this SMS command should be: “EMAILPASSWORD*123456*A123456”.

If the password & command is not right, the operation will fault.

Set Receive Alarm Email Address

Send SMS “EMAILRECEIVEADDR*123456*receiveemailaddress” to tracker to set the receive

alarm information email address, the “EMAILRECEIVEADDR” is a command, “123456” is password,

“receiveemailaddress” is the receive alarm email address, for example the receive alarm email

address is : [email protected], then this SMS command should be:

“EMAILRECEIVEADDR*123456*[email protected]”. If the password & command is not right,

the operation will fault.

The sending email address and receiving email address can be the same one, it means you can

send email to yourself by the same email address. Also you can specify another email address to

receive the alarm email.

Enable SMS alarm

Send SMS “SMSALARMON*123456” to tracker will make the above alarm setting send SMS to

user, otherwise the alarm only send email to user email address, “SMSALARMON” is a command,

“123456” is password, the tracker will send back information “SMS Alarm ON”, if the password is not

right, the operation is fault, the tracker will send back information “Wrong Password”.

Disable SMS alarm

Send SMS “SMSALARMOFF*123456” to tracker will make the above alarm only send email to

user email address, and will not send SMS to user, “SMSALARMOFF” is a command, “123456” is

password, the tracker will send back information “SMS Alarm OFF”, if the password is not right, the

operation is fault, the tracker will send back information “Wrong Password”.

Keep Tracker Online All the Time

Send SMS “KEEPONLINE*123456” to tracker can make the tracker keep online all the time,

“KEEPONLINE” is a command, “123456” is password, the tracker will not go to standby mode after

the tracker stop moving, it means the tracker will turn on the GPS module all the time, then user can

control the tracker all the time, this mode will cost some GPRS data and power battery, this mode

can be canceled and got to default shock sensor control mode (If the tracker stop moving 2 minutes,

it will turn off GPS and go to standby mode to save GPRS data charge & car battery) by the SMS

command “CANCELALARM”. If the shock sensor sensitivity is not high enough or the car is stolen,

enable this mode can make the car can be controlled all the time.

Cut Oil Power (Remote Turn Off Car Engine)

Send SMS “STOPENGINE*123456” to tracker, “STOPENGINE” is a command, “123456” is

password, the car engine will be turned off immediately. The tracker will send back information “Car

Engine turn off”, if the password is not right, the operation is fault, the tracker will send back

information “Wrong Password”.

Also logon the platform, click the “Cut oil power” menu in the left bottom windows can do the

same operation, please see the operation menu of the platform.

Attention: Turning off engine is very dangerous when car is driving, this will make

the car difficult to control and maybe cause a accident, so we recommend make the

relay cut the start motor wire, this will make you can not remote turn off car engine, but

you can make the car engine can not be started.

The output current of the tracker is small than 500mA, so a relay is necessary to install to turn off the

car engine, and also a diode is necessary to add to protect the tracker driving wire, the diagram is as

follow:

Low Battery Alarm:

When the tracker battery voltage is low, the GREEN LED of the tracker will flash 3 or 4 times,

and then the tracker will automatically send battery low information to the first preset phone number.

the battery life can last about 1-2 days according the different using condition (CCTR-800 standby

time is 5-7 days, uploading time is 24 hours, and CCTR-800/801 standby time is 2 days, uploading

time is 8 hours, but if the GPS and GSM signal is not good will reduce the time.)

Back to Default Configuration (Factory Configuration):

Send SMS “RESET*123456” to tracker, “RESET” is a command, “123456” is password, the car

engine will be turned off and turn on immediately, Also the tracker will reset all configuration to factory

default, all IP / APN / GPRS / TIME ZONE setting are deleted and back to default, all preset phone

number are deleted and password change to 123456, all the alarm setting is canceled, if you changed

these before, then after reset the tracker, you need set these again by sending SMS.

“SOS” Emergency

Press the “SOS” button 6 seconds, first the LED will flash fast, then the LED will turn OFF, release

the button, the tracker will send SOS help information to all 3 preset phone.

HELP ! ! !

Battery:91%

If the tracker receive the HELP information, please note that the SOS button must be pressed,

please call the driver to confirm with the user is safe or not or call the police.

The SOS function need installing the external SOS button (for CCTR-800 has not external SOS

button, user can press the SOS button beside the box), install the external SOS button in a hidden

place that driver can press the button, connect one wire of the SOS button to GND (car body), another

wire of the SOS button to tracker SOS wire.

Instruction List

Function SMS Instruction Note Reply Note

Set APN nameAPN*123456*apnname

Any mobilephone can set

APN:apnnameReply to operationphone

Set GPRS user name& password

USERNAME*123456*username*password


Username:username,Password:password

Reply to operationphone

Set Time ZoneTIMEZONE*123456*XYZ


Time Zone is XYZReply to operationphone

Check tracker IDNumber

ID*123456Any mobilephone can set

ID:CW9999C12345678901


Add phone numberADDPHONE*123456*A*13322990033


Add Preset PhoneOK

Reply to theoperation phone

Delete phone numberDELETEPHONE*123456*A

Any mobilephone candelete

Delete Preset PhoneOK


Check preset phonenumber

CHECKPHONE*123456

Any mobilephone can check

A:13912345678;B:13812345678;C:13712345678;


Change passwordCHANGEPASSWORD*123456*888888

Only presetphone can

New Password：888888

Reply to operationpreset phone

change

Check passwordCHECKPASSWORD

Only presetphone can check

Password: 888888Reply to operationpreset phone

Send SMS triggermap link reportlocation

LINKLOCATE*123456


Current location mapwebsite link


Send SMS triggerLatitude & Longitudereport location

SMSLOCATE*123456


Current locationLatitude & Longitudeinformation


Send SMS triggerText Descriptionreport location

TEXTLOCATE*123456


Current location in textdescription


Set SMS language inTEXTLOCATEoperation

LANGUAGE*123456*XY


Set Text Description inLanguage XY


Set Break Geo-fenceAlarm

SETAREA*123456*XY


Set area alarm OKReply to operationphone

Set Move Alarm SETMOVE*123456Any mobilephone can set

Set move alarm OKReply to operationphone

Set Over SpeedAlarm

SETSPEED*123456*XYZ


Set Speed alarm OKReply to operationphone

Set Shock AlarmSHOCKALARM*123456


Set Shock alarm OKReply to operationphone

Set GPS Signal AlarmGPSALARM*123456


Set GPS Signal alarmOK


Enable SendingAlarm by SMS

SMSALARMON*123456


Enable Sending Alarmby SMS


Disable SendingAlarm by SMS

SMSALARMOFF*123456


Disable SendingAlarm by SMS


Set Sending alarmEmail Address

EMAILSENDADDR*123456*sendingemailaddress


Sending Emailaddress:sendingemailaddress


Set Sending alarmEmail SMTP ServerName

SMTPSERVERNAME*123456*smtpservername


Sending Email smtpserver name::smtpservername


Set Sending alarmEmail Name

EMAILNAME*123456*emailname


Sending Emailname: emailname


Set Sending alarmEmail Password

EMAILPASSWORD*123456*emailpassword


Sending EmailPassword:emailpassword


Set Receiving alarmEmail Address

EMAILRECEIVEADDR*123456*receiveemailaddress


Receiving Emailaddress:receivingemailaddress


Listen & Monitorsound

MONITOR*123456*phonenumber


Call back and pick upthe calling can listen

Call back tooperation phone

Remote turn off carengine

STOPENGINE*123456

Only presetphone can set

Car Engine Turn OffReply to operationphone

Keep Tracker OnlineContinuously

CANCELALARM*123456


All Alarm CancelReply to operationphone

Set IP addressIP*123456*113.106.89.149,9066


IP:113.106.89.149,9066


Cancel All AlarmSetting

CANCELALARM*123456


All Alarm CancelReply to operationphone

Auto Re-power on &Reset tracker

RESET*123456Any mobilephone can set

Tracker Re-power onand cancel all alarmsetting


SOS EmergencyPress SOS buttonuntil the GREENLED turn off

HELP + locationinformation

Send SOS HELPinformation to allpreset phone

1.The tracker default password is 123456, you can change the password.

2.All the SMS information is in English word, “*” is the star key, “” is not including in the SMS information, it

is just used to indicate the information.

Notes & Trouble Shooting

1. This tracker use 2G GSM network, and it upload tracking only through 2G GPRS, it can not

work in CDMA network or 3G(WCDMA or CDMA2000) network. Please confirm that the SIM

card PIN code has been disabled. If the tracker can not find GSM network, the Green LED

will keep ON

2. The antenna of GSM and GPS is external, please note that the install location of the antenna

need receive the GPS signal, normally the back of the seat or in the door post or in the roof

post or under the back window or under the panel etc. please leave away the tracker from big

metal, make the top of the GPS antenna face to heaven, and keep away from the magnetic

components.

3. The tracker built in rechargeable backup Li battery, recharge one time can use about 1-2

days (standby mode), normally the tracker connect to the car battery all the time, this can

keep the tracker has power supply continuously, and the charging circuit will stop after the

battery is full.

4. The GPS need 10-200 seconds to locate the position, when the GSM signal is weak or the

network is very busy, the SMS maybe delay to send by the GSM network, this is normal.

5. The tracking data on our server will keep 6 months, the old data will be deleted.

6. The tracker auto power off: please confirm the tracker battery have enough power, and try to

recharge it; and confirm the adapter is working well .

7. After power on the tracker, the tracker GREEN LED keep on, and it has not any repose, and

no ring, please confirm the SIM card has been installed properly, the SIM card PIN code is

disable, and the SIM card has enough charge, and the mobile phone can work well in that

place. If the tracker work well the Green LED will flash once or third times every 4 seconds

(First power on, recharging the battery will delay the first locating 5-30 minutes).

8. If the tracker can not upload location to website, please confirm the SIM card has GPRS

function, and has set the APN or GPRS username & password (call the mobile phone hotline

to confirm the APN and GPRS username & password, and send SMS to tracker to set these).

if the tracker do not move, the tracker will not upload tracking, try moving the tracker in the

open air (Indoor room can not receive GPS signal) .

9. If the tracker can not send back information by SMS, please confirm the SIM card has

enough money, and has ID caller display function and SMS service function, and please read

the SMS information of the tracker sending back, and check the instruction & password is

right or not.

10. When call the tracker, it has ringing, but it will not hang up the calling, please check the

tracker has set the preset phone number, use the preset phone or delete the preset phone

number or let the tracker back to default is OK.

11. After go out the under ground park, some tracking will lost, the GSM and GPS module will

take a few minutes to receive signal and re-locate, some tracking maybe lost, this is normal.

12. Some time some location point is lost, this is normal, in the transmit process, some points

maybe are lost, but this will not happen very often.

Specification:

GSM Module U-Blox GPS Module U-Blox

GSM Frequency 4 band (850/900/1800/1900MHz) A-GPS Available

GPS channel 32 channels Locate precision 10-20 Meters

GPS Cold Start Time 30 seconds GPS Hot Start Time 1-2 second

GSM Antenna External GPS Antenna External

Battery (CCTR-811) 400mAh Uploading Current <200mA / 5V

Standby Current < 10 mA Working Temperature -20 0C to +55 0C

Absolute Temperature -35 0C to +70 0C Storage Temperature -40 0C to +80 0C

Warranty

This system has been tested before sold. We strongly recommend you to get this system installed by

professional. There is a one-year warranty except the following condition:

1. Installed, fixed, or changed by personally or unprofessional.

2. Warranty will eliminate if the ownership of the tracker has been changed.

3. Parts damaged by man-made.

4. Battery, antenna, wires, etc.

Warning: this device is just a auxiliary product that applying the location of current object, it can not replace the

car assurance, we have not any responsibility if you have damage or lost in using this tracker.

User Name Telephone: Tracker Telephone:

Purchase Date Year Month date Tracker S/N or ID:

Address:

Model: CCTR-811 □

Distributor:

Notes: The explanation of this manual is belonged to our company, some small changes may not notice

customer, if you have any problems please contact us, thanks!

Documents

CCTR- 8 11 Vehicle GPS T racker