Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
From the UK's leading control panel manufacturer 1
Product BrochureProduct Brochure (Issue 4 june 2008)(Issue 4 june 2008)
Striving For Excellence, Committed To Quality
From the UK's leading control panel manufacturer 2
Title Description Page
About Control Equipment Page 3
CB200 1, 2, 4 and 8 zone conventional control panel Page 6
Precept EN 2, 4, 8, 16 and 32 zone conventional control panel, EN54 approved
Page 8
Prescient 3 2 zone single area gas extinguishing control panel, EN54 approved
Page 10
Voyager 1-2 loop analogue addressable control panel Page 16
Discovery 1-4 loop analogue addressable EN54 approved control panel
Page 18
A1535 / A1536 8 way programmable expansion boards for the Voyager / Discovery control panels
Page 22
Semi Flush Bezels / Fully Flush Bezels
Semi flush and fully flush bezels for control panels
Page 24
Repeaters Fully Functional Repeater panels. Page 26
About Networking Introduction to networking the CEL analogue addressable control panels
Page 27
Alarm Manager Graphics System
PC based graphics package for network systems
Page 28
Pager System Paging system for the analogue addressable product range
Page 30
Printer Dot Matrix panel mounted printer option Page 32
Notes Sales / Technical notes Page 33
Conventional Devices List of conventional compatible devices Page 12
Addressable Devices List of addressable compatible devices Page 20
About Addressable Equipment Introduction to the CEL analogue addressable range of equipment
Page 14
Product Comparison Chart Page 4
Contacts List Key contact information Page 35
The Manufacturer of these products operates a policy of continuous improvement and reserve the right at its own discretion and with out prior notice to alter the product documentation / specification contained in this publication.
ContentsContents
From the UK's leading control panel manufacturer 3
With many years of specialist experience in manufacturing and supplying products to the national and international fire detection and alarm industry, Control Equipment Ltd is now one of the United Kingdom’s leading fire alarm control panel manufacturers. Considerable investment in people and equipment has placed Control Equipment firmly at the forefront of fire panel technology. Our strong commitment to continuous training and development enables us to meet the ever increasing challenges in the fire industry worldwide. From our modern premises in Dudley, right at the heart of the UK, we are able to provide a high quality, efficient service to our national and international customers. Working from a solid home base, our control panels are now installed in virtually every corner of the world. Approvals are very highly regarded throughout the industry. The company has held BS EN ISO 9001 for many years and many of the control panel ranges carry full British (LPCB) as well as a large number of international standards. We believe very strongly in the value and importance of working very closely with our partners in the fire industry in order to maintain and raise the profile of quality British fire products on the world stage. Our extensive Research & Development department is key to Control Equipment‘s activities and to our ability to be proactive in an ever-changing technological environment. A strong commitment to stringent testing and considerable on-going investment are central to Control Equipment’s role at the forefront of new product development. Our product range is extensive and designed to meet the different requirements of our clients’ applications from the United Kingdom and around the world. We have been very successful for many years in supplying conventional panels in a range of small, simple-to-install and simple-to-use, competitively-priced but very reliable panels as well as larger, higher-specification LPCB approved panels. In addition, our extinguishing system control panels and accessories have been well-received world-wide for many years. To complete the package we offer a full range of analogue addressable panels - from small but powerful 1-2 loop panels to multi-loop LPCB approved, both fully networkable with powerful cause & effect programming software and an optional Alarm Manager graphics package.
About Control EquipmentAbout Control Equipment
From the UK's leading control panel manufacturer 4
CB200 1 ZONE 1 2 1 1 CB200 2 ZONE 2 2 1 1 CB200 4 ZONE 4 4 1 1 CB200 8 ZONE 8 4 1 1 PRECEPT EN 2 ZONE 2 4 2 1 PRECEPT EN 4 ZONE 4 4 2 1 PRECEPT EN 8 ZONE 8 4 2 1 PRECEPT EN 16 ZONE 16 4 2 1 PRECEPT EN 32 ZONE 32 4 2 1 PRESCIENT 3 4 2 1 1 PRESCIENT PRE ACTION 4 2 2 1 VOYAGER 1 LOOP 32 1 2 2 1 VOYAGER 2 LOOP 32 2 2 2 1 DISCOVERY 1 LOOP 32 1 2 2 1 DISCOVERY 2 LOOP 32 2 2 2 1 DISCOVERY 3 LOOP 32 3 2 2 1 DISCOVERY 4 LOOP 32 4 2 2 1 DISCOVERY 5 LOOP 32 5 2 2 1 DISCOVERY 6 LOOP 32 6 2 2 1 DISCOVERY 7 LOOP 32 7 2 2 1 DISCOVERY 8 LOOP 32 8 2 2 1 NEXUS 1 LOOP 64 1 2 2 1 NEXUS 2 LOOP 64 2 2 2 1 NEXUS 3 LOOP 64 3 2 2 1 NEXUS 4 LOOP 64 4 2 2 1 NEXUS 5 LOOP 64 5 2 2 1 NEXUS 6 LOOP 64 6 2 2 1 NEXUS 7 LOOP 64 7 2 2 1 NEXUS 8 LOOP 64 8 2 2 1
Con
vent
iona
l
Ana
logu
e (A
pollo
XP9
5)
Ana
logu
e (A
pollo
Dis
cove
ry)
Ext
ingu
isha
nt
Flam
mab
le G
as D
etec
tion
No.
Of Z
ones
No.
Of L
oops
Ear
th L
eaka
ge M
onito
ring
Cla
ss C
hang
e In
put
Eva
cuat
e In
put
Sile
nce
Ala
rms I
nput
R
eset
Inpu
t
Faul
t Inp
ut
No.
Of S
tand
ard
Ala
rm C
ircu
its
No.
Of S
tand
ard
Fire
Rel
ay C
onta
cts
No.
Of S
tand
ard
Faul
t Rel
ay C
onta
cts
Aux
iliar
y Po
wer
Rep
eate
r O
utpu
ts O
pen
Col
lect
or
Rep
eate
r O
utpu
ts R
S485
Pane
l Enh
ance
men
t Ava
ilabl
e
Comparison ChartComparison Chart
From the UK's leading control panel manufacturer 5
Sem
i Flu
sh In
stal
latio
n O
ptio
n
App
licat
ion
Gui
des
Pric
e In
form
atio
n
Net
wor
king
out
puts
Plas
tic E
nclo
sure
Stee
l Enc
losu
re
Surf
ace
Inst
alla
tion
Sem
i Flu
sh A
s Sta
ndar
d
Fully
Flu
sh In
stal
latio
n O
ptio
n
LPC
BS5
839
Pt 4
L
PC E
N54
Pt 2
& 4
Llo
yds R
egis
ter
BS5
839
Pt 4
Llo
yds R
egis
ter
Mar
ine
EN
V 1
& 2
Sale
s Lite
ratu
re
Bat
tery
& L
oop
Cal
cula
tions
Wir
ing
Rec
omm
enda
tions
Inst
alla
tion
Man
uals
Prog
ram
min
g M
anua
l
End
Use
r In
stru
ctio
ns
CB200 1 ZONE
CB200 2 ZONE
CB200 4 ZONE
CB200 8 ZONE
PRECEPT EN 2 ZONE
PRECEPT EN 4 ZONE
PRECEPT EN 8 ZONE
PRECEPT EN 16 ZONE
PRECEPT EN 32 ZONE
PRESCIENT 3
PRESCIENT PRE ACTION
VOYAGER 1 LOOP
VOYAGER 2 LOOP
DISCOVERY 1 LOOP
DISCOVERY 2 LOOP
DISCOVERY 3 LOOP
DISCOVERY 4 LOOP
DISCOVERY 5 LOOP
DISCOVERY 6 LOOP
DISCOVERY 7 LOOP
DISCOVERY 8 LOOP
NEXUS 1 LOOP
NEXUS 2 LOOP
NEXUS 3 LOOP
NEXUS 4 LOOP
NEXUS 5 LOOP
NEXUS 6 LOOP
NEXUS 7 LOOP
NEXUS 8 LOOP
From the UK's leading control panel manufacturer 6
CB200
1, 2 , 4 and 8 Zone Conventional Control Panels1, 2 , 4 and 8 Zone Conventional Control Panels
Key FeaturesKey Features ♦ Built-in detector removal indication facility
♦ From 1 to 8 zones
♦ 4 Alarm circuits on 4-8 zone panels
♦ Conforms to the requirements of EN54-2
♦ User-friendly access code
♦ One-man test facility
♦ Non-latching zone feature
♦ Class change input
♦ Earth fault monitoring
♦ Fully-functional repeater available (4 & 8
zone panels only)
♦ Removable cable-entry grommets
♦ User-friendly controls
♦ Surface or semi-flush mounting as standard
♦ Ample termination space
♦ Flame-resistant polycarbonate enclosure
♦ Log book and manual supplied
♦ Complies with EMC and LVD directives
From the UK's leading control panel manufacturer 7
2500/383 CB200 1 zone control panel
2500/384 CB200 2 zone control panel
2500/385 CB200 4 zone control panel
2500/386 CB200 8 zone control panel
Part Numbers Part Numbers
IntroductionIntroduction The CB200 conventional panel may be supplied in 1, 2, 4 or 8 zone formats. It complies with the requirements of EN54 Part 2. All zones and alarm circuits are monitored for open and short circuit fault conditions with detector removal facility also provided as standard. The cabinet will house 2 x 12V 2.1AH S.L.A. batteries wired in series, which will sustain an 8 zone panel for up to 24 hours. All panels have a zone 1 non-latch facility to enable panel interlinking without “lock-up” occurring. The class change input enables the alarm circuits to operate without panel indication or panel latching. The cabinet back-box houses only the transformer, thus providing a virtually empty enclosure for first fix installation. A steel gland plate, removable plastic grommets and ample space are designed to assist with cable termination. A slide-in insert is included for clear zone identification. The surface-mount electronics motherboard is fitted and terminated after first fix installa-tion. Finally a terminal cover completes the panel installation. The 4 & 8 zone panels will accommodate up to 3 repeater panels, which are connected by a shielded 2- core data cable where the repeater panels are powered locally, or an additional 2-core may be run from the panel for power (Max. 1 repeater may be powered from the panel).
1 zone panel 2 zone panel 4 zone panel 8 zone panel Auxiliary 24VDC output 250mA
Maximum battery charger output 500mA @27.5 VDC
Common fire output Volt-free contacts - 1A, 30V DC max.
Common fault output Volt-free contacts - 1A, 30V DC max.
Alarm circuit output 2 at 250mA each @28VDC
2 at 250mA each @28VDC
4 at 500mA each @28VDC
4 at 500mA each @28VDC
Battery size 2 x 12V 2.1AH sealed lead acid
2 x 12V 2.1AH sealed lead acid
2 x 12V 2.1AH sealed lead acid
2 x 12V 2.1AH sealed lead acid
Cabinet Sizes (Back box only) 245mmH x 287mmW x 66mmD (Excluding front cover)
Weight (excluding batteries) 2.3kg 2.3kg 2.3kg 2.3kg
800mA maximum alarm load
Technical SpecificationsTechnical Specifications
From the UK's leading control panel manufacturer 8
Precept EN
2, 4, 8, 16 and 32 Zone Control Panels2, 4, 8, 16 and 32 Zone Control Panels
Key FeaturesKey Features
♦ From 2 to 32 zones (up to 32 detectors per zone) ♦ EN54-2 approval by LPCB ♦ Comprehensive end-user facilities (access level 2) ♦ Designed & built using the latest technology for optimum performance and consistently high quality ♦ Extensive configurable facilities for the engineer via DIL switches ♦ 4 alarm circuits as standard (4 zone panel and above) ♦ Up to 5 fully-functional repeaters - 2-wire RS485 ♦ Range of EN54 compliant power supply modules, designed to meet the specific load requirements of
each size panel
♦ Zonal one-man test feature and sounder one-man test facility ♦ Short Circuit to fire setting for use with older type detectors ♦ Panel inputs for class change, evacuate, silence alarms, system reset ♦ 3 open collector outputs for evacuate, buzzer active, disablement active ♦ Auxiliary supply output - monitored fuse ♦ Panel expansions boards for open collector, relay and alarm outputs ♦ Optional timer clock/counter module
From the UK's leading control panel manufacturer 9
2605/100 Precept EN 2 zone control panel
2605/101 Precept EN 4 zone control panel
2605/102 Precept EN 8 zone control panel
2605/103 Precept EN 16 zone control panel
2605/104 Precept EN 32 zone control panel
Part Numbers Part Numbers
IntroductionIntroduction The Precepten range of conventional control panels is a powerful yet user-friendly series of control panels. They are designed and manufactured to a high standard and are approved by the Loss Prevention Certification Board (LPCB) to EN54-2 and EN54-4. The Precept range has earned a reputation over many years for quality and reliability and is recognised as market leader in many countries around the world. This latest generation takes advantage of the very latest technological advancements both in terms of design and manufacturing techniques to meet the exacting requirements of the latest European standards. Each panel in this series has extensive configuration options but is easy to install, programme and operate. This is supported by comprehensive documentation on commissioning, operation & maintenance. The panels are designed for use with a wide range of manufacturers’ detectors. A complete range of fully-flush and semi-flush bezels can be supplied for all Precepten control panels. There is also a comprehensive range of other compatible equipment such as repeaters, relays and power supply units, available to meet customer requirements.
Precept EN Expansion Boards
2605/060 C1630 output board driver
2605/061 C1631 repeater driver
2605/063 C1633 8 way open collector output board
2605/064 C1634 8 way relay board
2605/065 C1635 8 way alarm board
Technical SpecificationsTechnical Specifications
2 zone panel 4 zone panel 8 zone panel 16 zone panel 32 zone panel
Auxiliary 24VDC output 1 @ 500mA 1 @ 500mA 1 @ 1A 1 @ 1A 1 @ 1A
Maximum battery charger output 1.5A
Common fire output 1 x Fire Routing, 1 x Fire Protection monitored or Volt-free contacts
Common fault output Monitored or Volt-free contact
Alarm circuit output 2 at 500mA each @28VDC
4 at 500mA each @28VDC
4 at 1A each @28VDC
4 at 1A each @28VDC
4 at 1A each @28VDC
Battery size 2 x 12V 3.4AH sealed lead acid
2 x 12V 3.4AH sealed lead acid
2 x 12V 7AH sealed lead acid
2 x 12V 12AH sealed lead acid
2 x 12v 12AH sealed lead acid
Cabinet Sizes (Back box only) 370 x 325 x 126 370 x 325 x 126 370 x 325 x 126 370 x 325 x 126 441 x 400 x 131
Weight (excluding batteries) 7.05 kg 7.05 kg 7.05 kg 7.05 kg 9.35 kg
1.5A 3A 3A 5A
From the UK's leading control panel manufacturer 10
Prescient 3
2 Zone Single Area Gas Extinguishing Control Panel2 Zone Single Area Gas Extinguishing Control Panel
Key FeaturesKey Features ♦ Comprehensive facilities for gaseous extinguishing systems ♦ Approval to BSEN 12094-1:2003 additional options ♦ Approval to BSEN 54-2 and 4. ♦ Designed to BS7273-1:2000 ♦ Monitored inputs for gas discharged, gas low, isolation valve closed/abnormal, gas trapped
in manifold
♦ Control inputs for auto/manual, gas hold, gas abort ♦ 1 minute actuator cut off option ♦ Monitored actuator/solenoid release ♦ Common fire, fault, relay / monitored output facilities ♦ 1st stage, 2nd stage, 3rd stage and gas discharged relay / monitored output facilities ♦ Reset relay facilities ♦ Single or double knock operation ♦ Pre-discharge delay adjustable from 0 to 60 seconds with visible countdown timer ♦ Discharged indication with or without pressure switch ♦ Inhibit silence alarms until gas discharged ♦ Option for rapid buzzer pulse when gas imminent ♦ One man zone and sounder test ♦ Easily removable chassis
BSEN54 pt 2 & 4, and BSEN12094-1
Licence No. KM507341
From the UK's leading control panel manufacturer 11
IntroductionIntroduction The Prescient3 gaseous extinguishant control panel is powerful yet user-friendly and is designed and manufactured to a high standard. The panel features approval to BSEN 12094-1:2003, BSEN 54-2 and 4 and is designed to BS7273 part 1. The panel has extensive configuration options but is easy to install, programme and operate. The removable chassis enables the engineer to “first fix” an empty cabinet and then fit the chassis at the commissioning stage.
Technical SpecificationsTechnical Specifications
Maximum power supply output 5.0A, 28V DC
Integral charger output, quiescent 5.0A, minus mains failed current
Integral charger output, alarm 5.0A, minus alarm current Remote inputs Sound Alarms, Silence Alarms, Reset, Gas Trapped, lAuto/Manual/Lock-off, Low Pressure, Isolation
Valve Status, Pressure Switch, Timer hold, Emergency Abort
Repeater outputs Zonal Fire, Manual Release, Emergency Abort, Emergency Hold, Actuator Disabled, Isolation Valve Closed, Isolation Valve Abnormal
Status indicator outputs RS485
Monitored outputs with clean relay contact option First Stage, Second Stage, Third Stage, Gas Released, Fire, Fault , Reset
Engineers DIL switch settings Intrinsically Safe Zones, Pre Discharge Delay, Silent Zone Test, Buzzer Disabled, Latched Faults, Instant Manual Release, Buzzer Pulses At The End Of Delay, Zones 1 & 2 Single Knock, No
Discharge Pressure Switch, Actuator Short Circuit Disabled, Reset Inhibit Period, Clear Actuators After 1 Min, Silence Alarms Before Reset, Output 1 - Auto, Output 2 - Manual, Configure SLU, 3K9
End Of Line, N/C Low Pressure Input.
Internal fault indications Shutdown 3 Fault, Shutdown 2 Fault, Shutdown 1 Fault, Actuator 2 Fault, Actuator 2 Fault, Actuator 1 Fault, Ext Sounder Fault, Sounder 1 Fault, Sounder 2 Fault, Auto/Manual Fault, Field MR Fault, Panel MR Fault, Abort Fault, Hold Fault, Gas Trapped Fault, Isolation Valve Fault, Gas Low Fault,
Fas Released Fault, SLU Fault, Config On, Gas Signal Fault, Mains Fault, Batt/Discharge Fault
Maximum auxiliary 28V DC supply 250mA
Alarm circuit rating 3 at 500mA, 28V DC each (fused)
Actuator/solenoid circuit rating 2 at 1A, 28V DC each (fused)
Internal battery size 2 x 12AH S.L.A.
Panel dimensions 370mm high x 325mm wide x 130mm deep
Weight (excluding batteries) 4.85kg
2605/702 Prescient 3 gas extinguishing control panel
2605/704 Status Lamp Unit indication only
2605/706 Status Lamp Unit with Indication, Manual Release and Auto/Manual Switch
2605/708 Status Lamp Unit with Indication, Manual Release, Abort, Timer Hold and Auto/Manual Switch.
2605/710 Status Lamp Unit with Indication and Auto/Manual Switch - Weatherproof
Part Numbers Part Numbers
From the UK's leading control panel manufacturer 12
Conventional Devices
Detectors, Call Points and Door Holders
2501/003 Apollo 45681-201 S65 common base with diode
2501/005 Apollo 55000-317 S65 optical detector
2501/006 Apollo 55000-122 S65 A1R temperature detector (57 deg)
2501/008 Apollo 55000-126 S65 BR temperature detector (75 deg)
2501/009 Apollo 55000-132 S65 CR temperature detector (90 deg)
2501/010 Apollo 55000-137 S65 CS temperature detector (90 deg)
2501/011 Apollo 45681-200 S65 common base (no diode)
2501/214 Apollo 45681-245 S65 relay base
2501/012 KAC manual call point (flush mounting)
2501/013 KAC manual call point (surface mounting)
2501/014 Pack of 5 spare glasses for manual call point
2501/033 24v dc magnetic door holder
2501/034 230v ac magnetic door holder
2501/035 Door retainer bracket
2501/176 KAC weatherproof manual call point
Sounders
2601/009 Roshni 24v electronic sounder (IP65) - red deep base
2601/010 Roshni 24v electronic sounder - red shallow base
2601/011 Banshee warbler 24v electronic sounder
2601/012 Red 24v electronic bell 150mm
2601/013 Vara 24v electronic room sounder - red (97dB)
2601/014 Vara 24v electronic room sounder - white (97dB)
2601/015 Red 24v electronic weatherproof (IP65) bell 150mm
2601/016 Red 24v electronic weatherproof (IP65) bell 200mm
2601/021 Vector 24v electronic platform sounder - white (91dB)
2601/023 Vector red cover plate
2601/024 Squashni 24v electronic platform sounder
2601/025 Squashni white cover plate
2601/044 Flashni 24v combined sounder beacon
Part Numbers Part Numbers
From the UK's leading control panel manufacturer 13
Conventional Devices
2601/050 Vantage 24v electronic sounder (IP65) - red deep base (105dB)
2601/051 Vantage 24v electronic sounder - red shallow base (105dB)
2601/052 Vantage 24v electronic sounder (IP65) - white deep base (105dB)
2601/053 Vantage 24v electronic sounder - white shallow base (105dB)
2601/054 Vantage 24v combined sounder beacon - red case / red lens
2601/055 Vantage 24v combined sounder beacon - red case / amber lens
2601/056 Vantage 24v combined sounder beacon - red case / blue lens
2601/057 Vantage 24v combined sounder beacon - white case / red lens
2601/058 Vantage 24v combined sounder beacon - white case / amber lens
2601/059 Vantage 24v combined sounder beacon - white case / blue lens
2601/017 Klaxon Sonos wall mounted sounder (IP65) - red deep base (106dB)
2601/018 Klaxon Sonos wall mounted sounder - red shallow base (106dB)
2601/019 Klaxon Sonos wall mounted sounder/beacon (IP65) - red lens deep base (106dB)
2601/026 Klaxon Sonos wall mounted LED beacon (IP65) - red lens deep base (106dB)
2601/027 Klaxon Sonos wall mounted LED beacon - red lens shallow base (106dB)
2601/030 Apollo 45681-513 S65 conventional sounder base (32 tones) c/w diode
Batteries
2602/001 2.1 AH battery set
2602/003 3.4 AH battery set
2602/004 7.0 AH battery set
2602/005 12.0 AH battery set
2602/006 17.0 AH battery set
2602/007 24.0 AH battery set
2602/008 38.0 AH battery set
2602/009 65.0 AH battery set
2602/010 100.0 AH battery set
Note : Further products are available that may not be listed in the brochure, please contact our sales team direct on 0871 7169641 (UK only) for further information.
Part Numbers Part Numbers
From the UK's leading control panel manufacturer 14
Introduction The Voyager 1-2 loop and Discovery 1-4 loop analogue panels provide a comprehensive solution for control of fire detection systems based on the Apollo XP95 and Discovery protocols. The two panels offer exactly the same extensive software capability and may be linked via the network interface card to integrate into one distributed system. Network repeaters and alarm manager graphics systems may be added to provide network-wide information and control where a panel is not required. Both panels feature the same high output loop driver circuitry offering the maximum possible tolerance to loop cabling faults whilst still maintaining the ability to function in mains failed full alarm conditions. The Voyager panel features a compact enclosure whilst the Discovery panel features additional LPCB approval to EN54-4. The full system may be configured on the PC programming software and then downloaded to the panel. The panel’s loop configuration capability enables the contents of the loop to be registered in the panel’s memory without the need to re-download the software even if the loop is commissioned in stages. Changes to the panel’s cause/effect programming may, if required, be done on site and then uploaded to the PC. The Voyager and Discovery panels support both XP95 and Discovery devices on the same loop. The software enables the engineer to fully configure the device settings as required. Software Management
♦ Change engineers password ♦ Each device may be assigned a text message for user identification ♦ Output devices may also be allocated a text identification for reference purposes ♦ Visible zones and hidden programming groups may be allocated a text identification for reference purposes ♦ Programmable panel inputs may be assigned a text message for user identification ♦ Programmable panel outputs may be assigned a text identification for reference purposes Cause/Effect Capability
♦ Upto 96 visible detection zones plus upto 223 hidden programming groups ♦ Each device may be allocated into 1 visible zone plus 7 hidden programming groups ♦ Each device may be set to a default, day time, night time, alert and fire sensitivity settings ♦ Discovery devices may be set into 4 programming groups for manual mode changes triggered by loop inputs ♦ Programmable delays may be configured ♦ Global day/night delay timer, 7-day day/night clock for sensitivity settings ♦ 4 programmable software delay timers for use with cause/effect for delay/sequential operations ♦ Extensive cause/effect conditions available
An Introduction to CEL analogue addressable range of An Introduction to CEL analogue addressable range of equipmentequipment
From the UK's leading control panel manufacturer 15
System IllustrationSystem Illustration
BREAK GLASS
FIRE
PRESS HERE
ISOLATOR
BREAK GLASSPRESS HERE
FIRE
ISOLATOR
FIRE
PRESS HERE
BREAK GLASS
PRESS HERE
BREAK GLASS
FIRE
PC graphics & printer
Panel repeater
Voyager panel
8 - way enhancement boards
Discovery panel
Engineer’s laptop
Network repeater panel & mimic display Control desk with
network repeater
Hazardous area using data translators and I.S. barriers
Conventional zones linked via outstation
Extinguishant panel linked via outstation
XP95 and Discovery loop devices, outstations and sounders. 126 addressed devices + up to 126 ancillary sounders per loop
Conventional zones linked via outstation zone monitor unit
Network 15 active + 17 passive nodes Extensive user and cause / effect network - wide capabilities Voyager / Discovery, network repeaters and graphics systems may all be connected on a single network
From the UK's leading control panel manufacturer 16
Voyager
11--2 Loop Analogue Addressable Control Panels2 Loop Analogue Addressable Control Panels (XP95 & Discovery Protocols)(XP95 & Discovery Protocols)
Key FeaturesKey Features
♦ From 1-2 loops ♦ Compliant with EN54 parts 2 and 4, BS EN 60950 and BS EN 50130 part 4 ♦ Full Apollo XP95 and Discovery compatibility ♦ Automatic recognition of Apollo or CEL outstations ♦ Extensive mode change options by day/night and special group allocation ♦ Windows-based, full upload/download PC software package ♦ 500mA output per loop with highly stable voltage platform, even under mains-failed conditions ♦ Fully networkable with other Voyager and Discovery panels, graphics package and Integra
network repeaters
♦ Powerful processing and extensive panel and loop I/O capability ♦ User-friendly controls and a clear, unambiguous screen ♦ Membrane facia with tactile switches ♦ Complies with EMC and LVD Directives
From the UK's leading control panel manufacturer 17
IntroductionIntroduction The Voyager analogue addressable panels are a powerful yet user-friendly series of control panels. They are designed to a high standard in compliance with EN54, parts 2 & 4. Each panel in this modular series has considerable processing ability but is easy to install, programme and operate. This is supported by comprehensive support documentation. Panels are housed in steel enclosures and are finished in hardwearing epoxy paint. This panel is ideally suited to installations which require very complex sounder and control/shutdown functions. The panels are programmable to meet individual site requirements by means of a cause & effect matrix. This is downloaded from a PC, using the Cause & Effect Edit Programme. Text may be edited via a keyboard or downloaded from a PC. The Voyager has a 4 line x 20 character backlit LCD display, showing the first and most recent event. Other events may be reviewed using the More Messages facility. User controls are accessed by means of keyswitch-enabled membrane controls, with password protection for engineer purposes. Each panel has a high level of processing power and each loop has its own processor. The panel allows up to 126 addresses per loop. All addresses on a loop may be used for output functions, with 3 independently programmable output bits per address. By using Apollo Discovery detectors, the system may be configured to automatically switch between heat and smoke detection at selected times of day or week. Additional facilities are also provided for temporary switching between smoke and heat detection to suit short-term changes in environmental conditions. Up to 248 user-definable panel inputs and relay/two-stage alarm outputs can be provided via expansions boards. Many useful testing and service functions are also provided. All events may be recorded on the optional printer and zonal indications are included as standard. There is a complete range of compatible accessories available to support the Voyager panels to meet most customer requirements. The addition of a network card to the panel will allow monitoring, indication and control of the functions of a networked installation, allowing signals to be distributed around a large site.
Technical SpecificationsTechnical Specifications
Mains voltage 230V AC +10% -6%
Mains failed fault battery current 1 loop - 145mA 2 loop - 170mA
Mains failed alarm battery current 1 loop - 260mA 2 loop - 285mA
Maximum battery charging current 1.5A
Alarm circuits 2 @ 1A per circuit
Auxiliary supply 20V-28V @ 500mA
Weight (excluding batteries) 8kg
Dimensions 370mm high x 325mm wide x 139mm deep
2500/955 Voyager 1 loop control panel
2500/956 Voyager 2 loop control panel
2500/163 A1620 network card
Part Numbers Part Numbers
From the UK's leading control panel manufacturer 18
Discovery
11--4 Loop Analogue Addressable Control Panels4 Loop Analogue Addressable Control Panels (XP95 & Discovery Protocols)(XP95 & Discovery Protocols)
Key FeaturesKey Features
♦ From 1-4 loops ♦ LPCB approved to EN54 parts 2 and 4 ♦ Full Apollo XP95 and Discovery compatibility ♦ Automatic recognition of Apollo or CEL outstations ♦ Extensive mode change options by day/night and special group allocation ♦ Windows-based, full upload/download PC software package ♦ 500mA output per loop with highly stable voltage platform, even under mains-failed
conditions
♦ Fully networkable with other Discovery and Voyager panels, graphics package and Integra network repeaters
♦ Powerful processing and extensive panel and loop I/O capability ♦ User-friendly controls and a clear, unambiguous screen ♦ Membrane facia with tactile switches ♦ Complies with EMC and LVD Directives ♦ 32 or 96 zonal fire and fault led indications
From the UK's leading control panel manufacturer 19
IntroductionIntroduction The Discovery analogue addressable panels are a powerful yet user-friendly series of control panels. They are designed to a high standard with LPCB approval to EN54, parts 2 & 4. Each panel in this modular series has considerable processing ability but is easy to install, programme and operate. This is supported by comprehensive support documentation. Panels are housed in steel enclosures and are finished in hardwearing epoxy paint. This panel is ideally suited to installations which require very complex sounder and control/shutdown functions. The panels are programmable to meet individual site requirements by means of a cause & effect matrix. This is downloaded from a PC, using the Cause & Effect Edit Programme. Text may be edited via a keyboard or downloaded from a PC. The Discovery has a 4 line x 20 character backlit LCD display, showing the first and most recent event. Other events may be reviewed using the More Messages facility. User controls are accessed by means of keyswitch-enabled membrane controls, with password protection for engineer purposes. Each panel has a high level of processing power and each loop has its own processor. The panel allows up to 126 addresses per loop. All addresses on a loop may be used for output functions, with 3 independently programmable output bits per address. By using Apollo Discovery detectors, the system may be configured to automatically switch between heat and smoke detection at selected times of day or week. Additional facilities are also provided for temporary switching between smoke and heat detection to suit short-term changes in environmental conditions. Up to 248 user-definable panel inputs and relay/two-stage alarm outputs can be provided via expansions boards. Many useful testing and service functions are also provided. All events may be recorded on the optional printer and 32 zonal indications are included as standard with an option for 96 zonal indications. There is a complete range of compatible accessories available to support the Discovery panels to meet most customer requirements. The addition of a network card to the panel will allow monitoring, indication and control of the functions of a networked installation, allowing signals to be distributed around a large site.
Technical SpecificationsTechnical Specifications
Part NumbersPart Numbers
Mains voltage 230V AC +10% -6%
Mains failed fault battery current 1L - 145mA 2L - 170mA 3L - 195mA 4L - 220mA
Mains failed alarm battery current 1L - 260mA 2L - 285mA 3L - 310mA 4L - 335mA
Max. battery charging current 1.5A
Alarm circuits 2 @ 1A per circuit
Auxiliary supply 20V-28V @ 500mA
Weight (excluding batteries) 15kg
Dimensions 1-4 loop std 1-4 loop large enclosure 5-8 loop
480mm high x 410mm wide x 144mm deep 480mm high x 670mm wide x 144mm deep 480mm high x 820mm wide x 144mm deep
2500/110 Discovery 1 loop control panel
2500/111 Discovery 2 loop control panel
2500/112 Discovery 3 loop control panel
2500/113 Discovery 4 loop control panel
2500/510 Discovery 5 loop control panel (2 panels networked together)
2500/511 Discovery 6 loop control panel (2 panels networked together)
2500/512 Discovery 7 loop control panel (2 panels networked together)
2500/513 Discovery 8 loop control panel (2 panels networked together)
2500/163 A1620 network card
Discovery 5-8 loop is in a double door enclosure and consists of 2 x Discovery panels networked together.
Discovery 1-4 loop in a large enclosure
From the UK's leading control panel manufacturer 20
Addressable Devices
XP95 Loop Devices
2501/020 Apollo 45681-210 XP95 common base (for use with Discovery / XP95 devices)
2501/021 Apollo 55000-401 XP95 high temperature detector
2501/022 Apollo 55000-500 XP95 ionisation detector
2501/023 Apollo 55000-600 XP95 optical detector
2501/024 Apollo 55000-400 XP95 temperature detector
2501/253 Apollo 55000-885 XP95 multi sensor detector
2501/438 Apollo 55000-268 XP95 50m reflective beam detector
2501/439 Apollo 55000-273 XP95 100m reflective beam detector
2501/106 Apollo 55000-280 XP95 dual IR flame detector
2501/026 Apollo 45681-211 XP95 standalone short circuit loop isolator base
2501/027 Apollo 55000-720 XP95 standalone short circuit loop isolator
2501/218 Apollo 45681-321 XP95 short circuit loop isolating detector base
2501/019 Apollo 55000-905 XP95 manual call point
2501/229 Apollo 55000-950 XP95 weatherproof manual call point
Discovery Loop Devices
2501/020 Apollo 45681-210 XP95 common base (for use with Discovery / XP95 devices)
2501/109 Apollo 58000-300 Discovery carbon monoxide detector
2501/270 Apollo 58000-500 Discovery ionisation detector
2501/271 Apollo 58000-600 Discovery optical detector
2501/272 Apollo 58000-400 Discovery temperature detector
2501/273 Apollo 58000-700 Discovery multi sensor detector
2501/274 Apollo 58000-910 Discovery manual call point
Part Numbers Part Numbers
From the UK's leading control panel manufacturer 21
Addressable Devices
XP95 Loop Interfaces
2501/371 Apollo 55000-849 XP95 single channel relay output unit c/w isolator (surface, loop powered)
2501/219 Apollo 55000-875 XP95 mains switching input / output unit (surface, loop powered)
2501/373 Apollo 55000-847 XP95 input / output unit c/w isolator (surface, loop powered)
2501/375 Apollo 55000-843 XP95 switch monitor unit c/w isolator (surface, loop powered)
2501/377 Apollo 55000-841 XP95 switch monitor plus unit c/w isolator (surface, loop powered)
2501/379 Apollo 55000-845 XP95 zone monitor unit c/e isolator (surface, loop powered)
2501/381 Apollo 55000-852 XP95 sounder circuit control unit c/w isolator (surface, external 24v DC supply required)
XP95 Loop Sounders
2601/034 Apollo 45681-276 XP95 ancillary sounder c/w XP95 detector base
2601/063 Apollo 45681-278 XP95 integrated sounder c/w XP95 detector base (55-91dB)
2601/064 Apollo 45681-277 XP95 integrated sounder c/w XP95 detector base and isolator (55-91dB)
2601/065 Apollo 45681-331 XP95 integrated sounder/beacon c/w XP95 detector base (55-91dB) !!NEW!!
2601/066 Apollo 45681-330 XP95 integrated sounder/beacon c/w XP95 detector base and isolator (55-91dB)
2601/067 Apollo 45681-292 XP95 integrated sounder cap - white (for use with 2601/063 and 2601/064)
2601/068 Apollo 45681-293 XP95 integrated sounder cap - red (for use with 2601/063 and 2601/064)
2601/041 Apollo 55000-278 XP95 stand alone high output sounder - red (92-100 dB)
2601/069 Apollo 55000-274 XP95 stand alone high output sounder, IP65 weatherproof - red (92-100dB)
2601/046 Apollo 55000-877 XP95 loop powered beacon - red lens (requires XP95 detector base)
2601/070 Apollo 55000-291 XP95 stand alone multi tone sounder/beacon - red case / red lens
2601/071 Apollo 55000-293 XP95 stand alone multi tone sounder/beacon c/w isolator - red case / red lens
2601/072 Apollo 55000-296 XP95 stand alone multi tone sounder/beacon, IP65 weatherproof - red case / red lens
2601/073 Apollo 55000-298 XP95 stand alone multi tone sounder/beacon c/w isolator, IP65 weatherproof - red case / red lens
Note : Further products are available that may not be listed in the brochure, please contact our sales team direct on 0871 7169641 (UK only) for further information.
Part Numbers Part Numbers
From the UK's leading control panel manufacturer 22
Key FeaturesKey Features
♦ Ideal for use with all Control Equipment’s Apollo protocol analogue addressable control panels
♦ 8 programmable inputs
♦ 8 programmable relay outputs rated at 1 Amp
♦ 8 open collector outputs
♦ RS485 communications protocol
♦ Up to 31 can be connected to each panel
IntroductionIntroduction The A1535 input/output board has 8 open collector 0v outputs, each rated at 100mA, whilst the A1535 relay board has 8
change-over relay contacts rated at 1A @ 24v. Both versions of the A1535 have 8 normally open inputs which can be set up as
one of three different types. They can be set up as monitored or non-monitored inputs, both of which are non-latching and
indication only. Alternatively, the third type is a fire indicating input which is a latching, monitored input.
Technical SpecificationsTechnical Specifications
Part Numbers Part Numbers
A1535 Relay Board
2500/156 A1535 input / output board
2500/157 A1535 8 way relay board
2500/162 A1619 programmable enhancement board driver card ( 1 per panel required)
Addressing 1 to 31 using DIL switches
Input Voltage 24V DC
Quiescent Current 100mA
Alarm Mode Current 100mA + 25mA per active output
Maximum Supply Current 1A
Open Collector Output Current 8 x fully loaded outputs, each at 100mA
Relay Contact Rating 8 x 24v 1A changeover contacts
Communications Protocol RS 485
From the UK's leading control panel manufacturer 23
Key FeaturesKey Features
♦ Ideal for use with all Control Equipment’s Apollo protocol analogue addressable control panels
♦ 8 programmable inputs 0v switched
♦ 8 programmable alarm outputs rated at 1 Amp
♦ RS485 communications protocol
♦ Up to 31 can be connected to each panel
IntroductionIntroduction The A1536 8 way alarm board provides 8 fully programmable alarm circuits, all rated at 1A. When programming, the engineer can
set up each circuit to give either a pulsed or a continuous tone. Additionally on the A1536 there are 8 open collector inputs, which
are 0v switched. These inputs are non-monitored and can be set up as fire input or indication-only inputs. The fire inputs are
latching inputs whereas the inputs for indication only are non-latching. All these inputs can be used in the panel’s cause/effect
programming.
Technical SpecificationsTechnical Specifications
Part Numbers Part Numbers
A1536 Alarm Board
2500/158 A1536 8 Way alarm board
2500/162 A1619 Programmable enhancement board driver card ( 1 per panel required)
Addressing 1 to 31 using DIL switches
Input Voltage 24V DC
Quiescent Current 100mA
Alarm Mode Current 100mA + 25mA per active alarm circuit + alarm cur-rent (when operational)
Maximum Supply Current 9A
Alarm Circuit Current 8 x fully loaded alarm circuits each at 1A
Communications Protocol RS 485
Key FeaturesKey Features
♦ Compatible with the full range of CEL panels
♦ Painted to match cabinet specification
♦ Supplied c/w simple “bolt on” fixing kit
♦ 30mm hole overlap
IntroductionIntroduction The CEL range of panels have two bezel options: the semi-flush bezel and the fully-flush bezel.
The semi-flush bezel simply bolts to the panel cabinet allowing the bevelled edge only to protrude from the wall. It has a painted
finish the same colour as the panel. A 30 mm hole overlap is provided to cover the hole edge.
The hole size required is detailed in the relevant Application Guides. Part NumbersPart Numbers
Semi-flush Bezels
Note: Illustration shows Voyager panel fitted with semi-flush bezel
2603/011 Semi flush bezel for Precept EN 2,4,8 and 16 zone control panel
2603/012 Semi flush bezel for Precept EN 32 zone control panel
2603/002 Semi flush bezel for Prescient II gas extinguishing control panel.
2603/002 Semi flush bezel for Voyager 1-2 loop control panel
2603/005 Semi flush bezel for Discovery 1-4 loop control panel
2603/006 Semi flush bezel for Discovery 1-4 loop control panel in large enclosure
T.B.A Semi flush bezel for Discovery 5-8 loop control panel
Key FeaturesKey Features
♦ Compatible with the full range of CEL panels
♦ Available in painted steel, stainless steel or brass
♦ May be painted to customers RAL specification
♦ Stainless steel and brass bezels available in polished or brushed finish
♦ Locates onto standard panel enclosure
♦ Supplied pre-fitted to enclosure
IntroductionIntroduction The CEL range of panels has two bezel options: the semi-flush bezel and the fully-flush bezel. The fully-flush bezel fits flush over
the panel back box and replaces the panel door with one complete bezel and door assembly. The fully-flush bezels are available
in three finishes, painted to a customers RAL specification, stainless steel and brass. The stainless steel and brass bezels may be
polished or brushed finish. Full details of the hole and bezel sizes are included in the relevant panel Application Guide and the
leaflet on fully flush bezel fixing details.
Part NumbersPart Numbers
Fully-flush Bezels
2603/060 Fully-flush painted bezel for Precept EN 2,4,8 and 16 zone control panels
2603/061 Fully-flush stainless steel bezel for Precept EN 2,4,8 and 16 zone control panels
2603/062 Fully-flush brass bezel for Precept EN 2,4,8 and 16 zone control panels
2603/065 Fully-flush painted bezel to fit Precept EN 32 zone control panels
2603/066 Fully-flush stainless steel bezel to fit Precept EN 32 zone control panels
2603/067 Fully-flush brass bezel to fit Precept EN 32 zone control panels
2603/052 Fully-flush painted bezel to fit Voyager 1-2 loop control panels
2603/053 Fully-flush stainless steel bezel to fit Voyager 1-2 loop control panels
2603/054 Fully-flush brass bezel to fit Voyager 1-2 loop control panels
2603/035 Fully-flush painted bezel to fit Discovery 1-4 loop control panels
2603/036 Fully-flush stainless steel bezel to fit Discovery 1-4 loop control panels
2603/037 Fully-flush brass bezel to fit Discovery 1-4 loop control panels
2603/038 Fully-flush painted bezel to fit Discovery 1-4 loop control panels (large enclosure)
2603/039 Fully-flush stainless steel bezel to fit Discovery 1-4 loop control panels (large enclosure)
2603/040 Fully-flush brass bezel to fit Discovery 1-4 loop control panels (large enclosure)
Note: Illustration shows Discovery panel fitted with fully-flush stainless steel bezel
From the UK's leading control panel manufacturer 26
Repeater Panels
CB200 repeater
Precept EN repeater
Voyager / Discovery repeater
2500/968 CB200 repeater panel
2500/967 CB200 repeater panel c/w 230v power supply
Part Numbers Part Numbers
2605/110 Precept EN 8 zone repeater c/w 230v power supply
2605/111 Precept EN 16 zone repeater c/w 230v power supply
2605/112 Precept EN 32 zone repeater c/w 230v power supply
2605/115 Precept EN 8 zone repeater
2605/116 Precept EN 16 zone repeater
2605/117 Precept EN 32 zone repeater
Part Numbers Part Numbers
2500/847 Voyager Repeater Panel
2500/848 Voyager Repeater Panel c/w 230v power supply
2500/830 Discovery Repeater Panel
2500/842 Discovery Repeater Panel c/w 230v power supply
2500/844 Discovery Repeater Panel c/w 230v power supply and 32 zonal led indica-tions.
2500/162 A1619 driver board
Part Numbers Part Numbers
From the UK's leading control panel manufacturer 27
Key FeaturesKey Features ♦ “All talk - selective listen” Peer-to-Peer network wide communication ♦ No Master panel or P.C. required and thus no single device of failure ♦ Network together: - Voyager panels Discovery panels Integra network repeaters Alarm manager graphics systems ♦ Up to 15 active panels or 60 loops may be networked together plus an additional 17 passive nodes ♦ Voyager panels, Discovery panels, Integra network repeaters and Alarm Manager graphics systems
may be configured as active or passive ♦ Full event and cause/effect programming across network
Networking
Introduction to NetworkingIntroduction to Networking The Integra network system has the facility to monitor, indicate and control the functions of a fire alarm installation, thus allowing signals to be distributed around a large site. The network operates as a global communication system and does not require a master panel or computer. This approach reduces cost and no single panel/equipment failure will disable the entire system. Each item of equipment connected to the network is referred to as a node. Each node can be either active or passive. Up to 15 active nodes plus an additional 17 passive nodes may be connected. Each node is programmed independently to listen, respond to, or ignore any or all of the messages sent by the other nodes on the network. The network uses RS 485 data communication. Up to a total network cable length of 5km is possible. All panels will continue to function in stand-alone mode, even if the network fails. The use of a networking system will allow individual parts of the site to be installed and commissioned prior to connection to the network. The operation of the network is such that each node has total stand alone capability in that its local operation is not directly affected by its connection to or disconnection from the network. The ability of a local control panel to observe events means that it can be programmed to respond to events elsewhere on the network. The effect of this capability is that any control panel is able to respond to any sensor device connected anywhere on the network. This provides a possible effective 60 loop control panel distributed around a single site as a number of smaller units. Network repeater panels provide the ability to observe and control elements of the network via a compact unit which may be conveniently mounted at manned control points and still provide all essential display and control facilities. Network communication takes place over a single pair of wires providing a link to all nodes. The overall concept can be described as 'all talk - selective listen', which means that every event that occurs on any node is transmitted into the network. Each node then decides (via programming) whether or not it is required to take any action. During quiescent conditions all active nodes signify their presence on the network by generating default messages.
From the UK's leading control panel manufacturer 28
Key FeaturesKey Features
♦ Ideal for use with all Control Equipment’s Apollo protocol analogue addressable control panels ♦ End-user friendly ♦ Up to 5 map pages per sensor
♦ Up to 32 devices or groups of devices per map page
♦ Up to 999 maps
♦ 2,000 event historic log
♦ All functions protected via up to 7 different password levels
♦ Identifies each user separately
♦ Up to 3 networks may communicate with the Alarm Manager
Alarm Manager
From the UK's leading control panel manufacturer 29
Introduction to Alarm ManagerIntroduction to Alarm Manager The Alarm Manager system is designed as a user-friendly tool to view a potentially complex fire situation. Once the system has
been set up on-site by a qualified engineer, the keyboard is no longer required, as all event maps and user buttons will appear on
the screen as necessary to manage the particular event taking place. The end user, who may not be technically-minded, will still be
able to operate the system on a daily basis. All the system’s management functions are protected via up to 7 different password
levels.
When an event occurs, the first map will appear along with the relevant user controls. There are up to 5 different maps for each
sensor showing the device location in different degrees of accuracy and also a procedure page which is allocated to each type of
event as prioritised within the configuration menu. There is also an instantly available current event log.
Technical SpecificationsTechnical Specifications The full Alarm Manager package includes:
PC
17” TFT Monitor
Network Interface for 1 Network
Installed Alarm Manager software
Part NumbersPart Numbers
2500/146 Alarm Manager Package (PC, 17" TFT Screen, Mouse, Keyboard, Net-
work Interface, Software)
2500/147 Alarm Manager Package (As above but with 15” touch screen)
From the UK's leading control panel manufacturer 30
Key FeaturesKey Features
♦ Ideal for use with the Voyager and Discovery panels ♦ Both text and numeric messages transmitted
♦ Up to 4 lines of information may be displayed on the pager
♦ Each line can display up to 16 characters
♦ Pagers display fire and fault conditions
♦ Multiple message memories
IntroductionIntroduction The radio pager system, when connected to the analogue addressable control panels, can be used to transmit both text and numeric messages direct to pocket pagers. Pagers will display Fire/Fault conditions including Sensor location text. Up to 9,999 pagers can be connected to the ConneXions unit.The ConneXions unit is a POCSAG data display radio paging system. The standard transmitter can quite easily extend up to a range of 1 mile and will provide good propagation on most industrial sites, covering an area with just a quarter wave antenna connected directly to the unit. If coverage of more than a mile is required, other antennae are available. The UCI unit is designed to interface data from the panel to the ConneXions unit. This unit is programmed to monitor data from the panel’s parallel printer port. This data in turn is formatted into a valid paging command, then sent to the ConneXions transmitter for onward transmission to the selected pager.
Interface Board
Opto isolator
Transmitter
Control Panel
Note: Illustration shows interface fitted into discovery Double-doored enclosure
Radio Pagers
From the UK's leading control panel manufacturer 31
Technical Introduction The radio pager system set up has four separate units which are described as follows:- ConneXions Unit The ConneXions unit is a POCSAG data display radio paging system that can be used to transmit both text and numeric messages directly to pocket pagers. Up to 9,999 pagers can be supported on any one system. The standard transmitter can quite easily provide ranges up to a mile and will provide good propagation on most industrial sites. If coverage of more than a mile is required, other antennae are available. UCI Interface Unit The UCI unit is designed to interface data from panel to the ConneXions unit. This unit is programmed to monitor data from the panel’s parallel printer port. This data in turn is formatted into a valid paging command, then (via opto isolation) is sent to the ConneXions transmitter for onward transmission to the selected pager. Opto Isolator The opto also provides protection against spurious voltage surges and reduces mains induced noise. Pager The pager is an alphanumeric pager and can display up to 4 lines of information, with each line being capable of displaying up to 16 characters. The pager is equipped with multiple beep types and multiple message memories. All screens can be scrolled.
Technical SpecificationsTechnical Specifications
Part NumbersPart Numbers
Note 1: This system requires a valid radio communications agency licence for operation in the UK. It is the user’s responsibility to apply for this
licence.
Note 2: The complete transmission unit is also available in a separate enclosure for use with the Voyager panel subject to installation restrictions.
2500/108 Radio pager transmission unit, complete with twin doored enclosure - Space for Discovery 1- 4 loop panel
2501/226 NEC 40 character message pager
ConneXions Mark 2 V6 Mains Operated Unit
Mains Input 230V 50Hz
Mains power Consumption 6W MA
Operating voltage 13.8V DC
Power Consumption 50mA Standby , 300mA transmit.
Internal Battery 0.7hA Battery Standby 8 Hours.
Power output 500mW
Frequency Range 450-470 MHz
Transmitter Type Approval No 10056 V6
Approvals CE
UCI Interface Unit
Minimum D.C Voltage 5 Volts D.C (Power from Panel Printer port)
External Supply 12 Volts D.C ( Optional Supply )
Power Consumption 50mA
Comms Port (output ) COMS 2 , RS232
Key FeaturesKey Features
♦ Ideal for use with all Control Equipment’s analogue addressable control panels
♦ 24 Column printer ♦ Reliable Epsom mechanism ♦ Open rear access and swing frame for easy paper and
ribbon change
♦ Engineers paper feed and printer test controls ♦ Accepts standard 57mm paper ♦ May be supplied with panel or easily fitted later
IntroductionIntroduction The CEL panel printer is a reliable easy to maintain unit, accepting standard 57mm “till roll” type paper and ink ribbons. The
printer is located on the panels door using two nuts on the hinge side and one knurled nut on the other. By undoing the
knurled nut the engineer may easily access the ribbon assembly for replacement.
The printer may be supplied with the panel or installed at a later date. All the required fixings, connectors and software drivers
are included with the fire alarm panel. The printer is supplied complete with the ribbon cable for panel connection.
The circuit board to the rear includes and engineers paper feed button and test button. The test button provides a standard test
printout to check the printers’ correct operation.
The paper feeds through the panels door preventing un-authorised access to the panels interior.
Technical SpecificationTechnical Specification
Part NumbersPart Numbers
Printer
2500/107 Printer c/w ribbon for Voyager and Discovery panels
2500/116 Replacement printer ribbon and paper
Printer Dimensions 90mm H (including paper roll) x 133mm W x 75mm D)
Weight 1.5kg
Paper Width 57.5 ± 0.5mm
Maximum Roll Diameter 50mm
From the UK's leading control panel manufacturer 33
Notes
From the UK's leading control panel manufacturer 34
Notes
From the UK's leading control panel manufacturer 35
Key Contacts Ken Walters Managing Director [email protected] Darren Jones General Manager [email protected] Chris Jones Sales Engineer (Mobile 07803 625762) [email protected] Darren Whitefoot Sales Engineer (Mobile 07855 420022) [email protected] Stuart Johnson Export Sales Co-ordinator [email protected] Graham Webb Quality Manager [email protected] Phil Bignell Site Support Engineer (Mobile 07753 913280) [email protected] For Sales Assistance - Call 0871 716 9641 (UK only) Darren Whitefoot Sales Engineer (Mobile 07855 420022) [email protected] Chris Jones Sales Engineer (Mobile 07803 625762) [email protected] Stuart Johnson Export Sales Co-ordinator [email protected] Martyn Castree Customer Support Co-ordinator [email protected] Richard Hart Customer Support Engineer [email protected] To Place or Progress an Order Stuart Johnson Export Sales Co-ordinator [email protected] Martyn Castree Customer Support Co-ordinator [email protected] Richard Hart Customer Support Engineer [email protected] For Technical Assistance - Call 0871 716 9640 (UK only) Martyn Castree Customer Support Engineer [email protected] Stuart Johnson Customer Support Engineer [email protected] Phil Bignell Site Support Engineer (Mobile 07753 913280) [email protected] To Arrange an Engineer’s Site Visit or Product Training Martyn Castree Customer Support Co-ordinator [email protected] Phil Bignell Site Support Engineer (Mobile 07753 913280) [email protected] For Accounts /Credit Information and To Arrange Export Collection Kerry MacDonald Administrative Assistant [email protected] For Warranty and Goods Returns Information Graham Webb Quality Manager [email protected]
Contacts ListContacts List
From the UK's leading control panel manufacturer 36
Control Equipment Ltd
Hillcrest Business Park, Cinderbank, Dudley, West Midlands, DY2 9AP, United Kingdom tel: +44 (0) 1384 458651 fax: +44 (0)1384 458972
email: [email protected] website: www.controlequipment.com
Key ContactsFor Sales Assistance - Call 0871 716 9641 (UK only)To Place or Progress an OrderFor Technical Assistance - Call 0871 716 9640 (UK only)To Arrange an Engineer’s Site Visit or Product TrainingFor Accounts /Credit Information and To Arrange Export CollectionFor Warranty and Goods Returns Information
/ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages true /GrayImageMinResolution 300 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 300 /GrayImageDepth -1 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages true /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /CropMonoImages true /MonoImageMinResolution 1200 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Bicubic /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict > /AllowPSXObjects false /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile () /PDFXOutputConditionIdentifier () /PDFXOutputCondition () /PDFXRegistryName () /PDFXTrapped /False
/Description > /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ > /FormElements false /GenerateStructure false /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles false /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /DocumentCMYK /PreserveEditing true /UntaggedCMYKHandling /LeaveUntagged /UntaggedRGBHandling /UseDocumentProfile /UseDocumentBleed false >> ]>> setdistillerparams> setpagedevice