cEMENT - verlagbt.de · 2016-11-21 · Maintenance in the cement industry • Modern maintenance and repair schemes • Diagnostic techniques and maintenance management • Strategies

MEDIA INFORMATION 2017

The technical journal for the cement industry

cEMENT processing perForMAnce ApplicAtion

INTERNATIONAl

Additi

onal dist

ributio

n

of 800

0 copies

of o

ur

regio

nal iss

ues

MEDIA INFORMATION 2017

ceMento internAcionAl

CEMENTINTERNATIONAL

CEMENT INTERNATIONAL | Media Information 2017

Team

2

Official organ: (German Cement Works Association)

and of the Hungarian Cement Association

Dr. rer. nat. Stefan Deckers studied chemistry with the emphasis on construction materials chemistry. He completed his dissertation on the “Influence of hydraulic binders on the proper-ties of hydro thermally hardened lightweight concretes”. Afterwards Dr. Deckers worked as publishing manager and editor of a public newspaper. From 2000 he was employed by the former Bauverlag GmbH as editor-in-chief of the specialist journal ZKG International. Since 2002 he has been work ing at the publishing house Verlag Bau+Technik where he manages the specialist journals concrete and cEMENT INTERNATIONAl.

Editor-in-chief – Dr. Stefan Deckers

Publisher – Dr.-Ing. Fritz Feige

Dr.-Ing. Fritz Feige studied mechanical engineering at the former Technical High School Dresden. On completion of his studies, he started his professional career at the VEB Zementanlagenbau Dessau, where he became the senior head of the main research and development department some years later. In this position he was heavily involved for a period of about 30 years in many significant developments in cement process and equipment technology. During this time he completed his doctoral work on “The move- ment and stress behaviour of a granular layer in the roller gap“ in close cooperation with the former Bergakademie Freiberg. From 1991 Dr. Feige worked as editor-in-chief at the Bauverlag GmbH in Wies-baden. Since 2002 he is publisher of the journal cEMENT INTERNATIONAl.

Editorial staff – Dr. rer. nat. Josef Strunge Dipl.-Min., Dipl.-Ing.

PhD Dr. Joseph Strunge, born 1948, job educa-tion as a material tester, graduate engineer for non-metallic processing at the University Sie-gen, Germany, graduate mineralogist at the Uni-versity Muenster, Germany, doctorate “Influence of alkalis and sulfates on the cement clinker and cement properties”. Since 1986 head of the material testing at the Dyckerhoff AG, laboratory manager of the plant Amoeneburg and since 2002 director of the Wilhelm Dyckerhoff Institute. PhD Dr. Joseph Strunge started his job career with an education to become a material tester. After that he studied in the branch of non-metallic mineral processing at the University of Siegen and began a second study of mineralogy at the Westfalian University of Muenster. The focus of both studies lay on processing and material interdependency in the cement clinker and cement production process. In his doctorate with the title “Influence of alkalis and sulfates on the cement clinker and cement properties” the interdependencies of alkalis and sulfates were examined. In the year 1986 he changed to the Dyckerhoff AG and became the head of the chemical and physical analysis. After a trainee and project phase as the laboratory manager of the plant in Amoeneburg he took over the directorate of the Wilhelm Dyckerhoff Institute for building technology at the Dyckerhoff AG in Wiesbaden.

Editorial staff – Chem. Eng. Subhash C. Rastogi

Chem. Eng. S. C. Rastogi studied chemical engineering at the coveted Indian Institute of Technology (IIT), Delhi. He worked for over 36 years with the Indian Cement and Building Materials Association, the National Council for Cement and Building Materials (NCB), and retired as joint director. During his long tenure, he mainly looked after project engineering and technology planning and transfer activities, especially for VSK mini cement plants, rice husk ash binders, CRI-Precal etc. S. C. Rastogi edited, designed and published a number of technical publications, periodicals and brochures. He has also been the head and organising secretary for many international events such as, the flagship NCB International Seminars on Cement and Building Materials.

Editorial staff – Prof. Dr. Siegbert Sprung

Prof. Dr.-Ing. Siegbert Sprung studied at the non-metallic minerals faculty of the Technical University of Clausthal. In 1961 he started his professional activities at the Research Institute of the German Cement Works Association (VDZ). He obtained his doctorate with a work on the “Reactions of sulfur during the burning of cement clinker“ at the TU Clausthal and qualified in 1982 as a university lecturer at the RWTH Aachen with a work on “Technological problems and their solution during the burning of cement clinker“, followed by an appointment as appl. Professor of Cement and Inorganic/Non-metallic Binder Technology. 1988 he was appointed divisional director of the main cement technology department of the Research Institute. From then until his retirement in 1999, Prof. Sprung was a member of the management team of the VDZ, finally acting as its speaker and head of the Research Institute.


Team

3

cEMENT INTERNATIONAl is the specialist practice-oriented technical journal covering the fields of manufacture, properties and applica-tions of cement and other binders. As the official organ of the VDZ (German Cement Works Association) and of the Hungarian Cement Association, it is of the highest standard and represents an impor-tant forum for communication with your clients.

cEMENT INTERNATIONAl appears every two months in English and German on at least 100 four-colour pages. The modern and attractive format is aimed specifically at the needs of the reader and makes cEMENT INTERNATIONAl a profitable advertising medium.

The wide range of detailed, practical and objectively presented con-tri- butions covers all the subject areas relevant to the cement and binder industries. Starting with raw material extraction, progressing through the burning and grinding processes and ending with the properties of the products and their application.cEMENT INTERNATIONAl appeals to everyone involved with the manufacture and uses of cement as well as with the necessary environmental precautions. The technical and practice-oriented observations, detailed descriptions of processes and accounts of practical experience from works and research institutes mean that cEMENT INTERNATIONAl makes a substantial contribution towards publicizing important research results and innovations among the experts of the international cement and binder industries. The qual-ity of the contributions is ensured by an experienced editorial staff, supported by a top-flight editorial advisory board. In the industrial section cEMENT INTERNATIONAl provides topical information on interesting events, trends and developments.

cEMENT INTERNATIONAl is a “must“ for everyone involved with ce-ment: plant engineers, machinery and plant construction engineers, technologists, cement chemists, mineralogists, geologists, sales engineers, marketing experts and businessmen.

Contents:

PCA – North American Cement Association FICEM – South American Cement AssociationAPCAC – Caribbean Cement AssociationAFCM – Asian Cement Association

Close contacts:

AUCBM,Arabian Cement Association

NCB,Indian Cement Association

CEMBUREAU, the European parent organization of the cement industry

Close partnership:

Cont

ents

3

Günther Jung started his career in 1969 at the former Bauverlag GmbH in Wiesbaden, where he was trained in the publishing business. He worked in the production and advertising area for the various relevant building industry tech-nical journals published by the company. In the year 2002, he began working for the publishing house Verlag Bau+Technik GmbH and since that time he has been employed as advertising manager for the journal cEMENT INTERNATIONAl.

Advertising Manager – Günther Jung

Target groups:

• Plant operators in the binder and mortar industries• Research and test institutes• Plant suppliers and ancillary industries• Universities• Public authorities and associations

cEMENT INTERNATIONAl offers you three possibilities for the distribution of publications from our journal

– as print version– as print-ready PDF data file to

reprint on your own initiative– as e-paper in the flip-book-

technology for comfortable scrolling in the Internet

Available in the languages English, German, Spanish, Portuguese, Chinese, Russian and Arabic.

For questions please call or write:

Tel.: +49 (0) 211 / 92499-40, e-mail: [email protected]

Special reprints for your individual requirements!

CEMENTINTERNATIONAL


CirC

ulat

ion

4

Distribution: Latin AmericaCirculation: 1 000 copies

Shippers, traders, analysts 1 %Equipment manufacturers 11 %

Mortar, ready-mix 12 %

Cement and lime headquarters 25 %

Lime manufacturing 19 %

Construction 1 %

Readership by business sector:

Cement plants 31 %

International circulation breakdown according to copies:

Total 2 914 copies = 100 %

Africa202 copies = 7 %

Asia722 copies = 25 %

Australia18 copies = 1 %

North-, South- and Central America998 copies = 34 %

Europe (excluding Germany)974 copies = 33 %

Germany804 copies= 22 %

Foreign countries2 914 copies= 78 %

Geographical distribution analysis according to copies:

Actually distributed 3 718 copies = 100 %


North America

South America

LATIN AMERICAN Edition


CirC

ulat

ion

5

Distribution: Russia and CIS StatesCirculation: 1 000 copies

Distribution: ChinaCirculation: 5 000 copies

Distribution: Middle East Circulation: 1 000 copies

ciMento internAcionAl

Africa

Europe

Australia

Asia

RUSSIAN Edition

CHINESE EditionARABIC Edition

at home in all world cement marketscEMENT INTERNATIONAl –

Distribution: Worldwide Circulation (Print run): 4 000 copies

CEMENTINTERNATIONAL

CEMENT INTERNATIONAL | Media Information 2017 6

EDITORIAL SCHEDULE 2017

VDZ Technical Conference ofCement Chemistry 2017Duesseldorf, Germany (30.03.2017)

Hanover Trade Fair 2017 with INTERKAMA+ Hanover, Germany (24-28.04.2017)

Annual General Meeting of the German Cement Works Association (VDZ)Ulm, Germany (27.04.2017)

Modern burning and grinding technology• Design and performance data of modern kiln plants• Efficient primary and secondary burners• Processing, storage and handling of primary and secondary fuels• Crushers and mills for coarse and fine comminution of limestone, cement

clinker, granulated blastfurnace slag and other cement constituents• Wear protection in vertical roller mills, high-pressure grinding rolls and ball mills• Refractory schemes for rotary kilns, calciners and cyclone separators

Conveying, storing, packaging and despatching of cement• Storage for cement raw materials and cement clinker• Hopper extraction systems, metering and weighing technology• Bagging, palletizing and shrinkwrapping technology• Despatch automation• Loading and unloading of bulk tanker vehicles and ships• Dedusting technology

Issue No. List of topics Special distribution

1

PD: 06.03.17AD: 17.02.17

Jan. – March

2017

Process and Packaging Leading Trade FairDuesseldorf, Germany (04.-10.05.2017)

Trade Show for Granules, Powder and Bulk Solids TechnologiesDortmund, Germany (10-11.05.2017)

Sustainable Strength through Innovation

59th IEEE-IAS/PCA Cement Industry Technical ConferenceCalgary/Alberta, Canada (21-25.05.2017)

Symposium » The Future of Cement « International Scientific SymposiumParis, France (06-08.06.2017)

Plants and machines for the production of cement, lime, gypsum and premixed dry mortar• Processing and extraction of raw materials for the cement, lime, gypsum,

concrete and premixed dry mortar industries• New developments in the analysis and homogenization of raw materials for the

cement, lime, gypsum, concrete and premixed dry mortar industries• Burning and cooling of cement clinker and quicklime• Crushers and mills for producing cement, lime, gypsum and premixed dry mortars• Mixers for the cement, concrete and premixed dry mortar industries

Conveying, storing, packaging and despatching of mineral bulk materials• Silos and hoppers for holding cement, lime, gypsum and premixed dry mortar• Hopper extraction systems, continuous conveyors and metering equipment• Bagging, palletizing and shrinkwrapping technology• Despatch automation• Loading and unloading bulk tanker vehicles and ships• Dedusting technology when handling bulk materials

2 PD: 05.05.17AD: 21.04.17

April – May

Annual General Meeting of the Federal GermanAssociation of the Lime Industry Berlin, Germany (22-23.06.2017)

Production and utilization of lime and gypsum products• Plants for producing lime and gypsum• Energy-saving and resource conservation in the lime and gypsum industries• Use of secondary fuels for burning lime• Process control and quality assurance• Properties and utilization of lime and gypsum products

Maintenance in the cement industry• Modern maintenance and repair schemes• Diagnostic techniques and maintenance management• Strategies for raising plant availability• Increasing the service life of refractory linings in rotary kilns, calciners and

cyclone separators• Innovative wear protection schemes to raise the service life of mills and crushers

3 PD: 16.06.17AD: 01.06.17

June – July

edit

oria

l sC

hedu

le

The selection of the editorial contents of the journal is made after discussion with our Ukrainian partner. The hand-picked technical articles cover the entire range of topics concerning cement manufacture and in particular also take into considera tion the specific information requirements of the cement manufacturer in the states of the former Soviet Union.

RUSSIAN Edition

PD: 07.07.17AD: 12.06.17

1

The selection of the editorial contents of the journal is made after discussion with our Chinese partner. The hand-picked technical articles cover the entire range of topics concerning cement manufacture and in particular also take into consideration the specific information requirements of the Chinese cement manufacturer.

CHINESE Edition

PD: 21.04.17AD: 31.03.17

1 CEMENTTECH 2017China International Cement Industry ExhibitionBeijing, China (28-30.04.2017)


EDITORIAL SCHEDULE 2017

Issue No.

Influence of process technology on the production of market-oriented cements• Requirements for the performance of market-oriented cements• Machinery and plants for producing market-oriented cements• Influence of burning and cooling on the properties of cement clinker• Influence of grinding and mixing on the properties of cement• Selection and processing of secondary raw materials• Composition, properties and utilization of cements with several

main constituents

Process technology of cement production• Control technology and information management systems• Instrumentation and control, recording and processing of information• Water, compressed air and electricity supplies• Motors and gear units• Laboratory automation and quality control

List of topicsSpecial distribution

Modernizing and raising the capacity of existing kiln and grinding plants• Operating results of modernized kiln and grinding plants• Possible ways of raising the output of kiln plants• Possible ways of lowering the energy consumption of kiln plants• Modernization of crushers, mills and classifiers• Experience with the implementation of modifications

Plants and machinery for cement manufacture• Operating results of modern kiln plants• Burner technology and kiln systems• Advances in clinker cooling• Grinding processes, drive technology and wear protection• Experience with the use of alternative fuels and raw materials• Refractory lining and emission checks

AUCBM 22th Arab-International Cement Conference and Exhibition (November 2017, date and location to be announced)

15th NCB International Seminar on Cement and Building Materials New Delhi, India (November or December 2017, date to be announced)

6 PD: 08.12.17AD: 27.11.17

December

PD = Publishing DateAD = Advertising Closing Date

edit

oria

l sC

hedu

le

Subject to alterations!

Plant and equipment for the handling of mineral bulk materials• Silos and hoppers for storing cement, lime, gypsum and premixed dry mortars• Conveying and metering of cement, lime, gypsum and premixed dry mortars• Loading and unloading of bulk tanker vehicles and ships• Dedusting technology during the handling of bulk materials• Bagging, palletizing and shrinkwrapping technology• Chemical analysis and particle measurement technology

Environmentally friendly burning, grinding and cooling technology• Multi-channel burners for thermal utilization of secondary fuels• Energy requirement and energy consumption of crushers and mills• Energy-efficient, low-wear clinker coolers• Abatement of emissions and immissions of dust, gas, noise and vibration• Selection, processing, storage and metering of secondary raw materials and fuels

Annual Cement Conference 2017 of theGerman Cement Works Association (VDZ)Duesseldorf, Germany (19-20.09.2017)

Nuremberg, Germany (26-28.09.2017)

22th Conference Bulk Material HandlingTechnology 2017Magdeburg, Germany (27-28.09.2017)

UNITECR 2017Santiago, Chile (27-29.09 2017)

FICEM-APCAC Technical Conference(September 2017, date and location to be announced)

14. TÇMB International Technical Seminar and Exhibition Belek Antalya, Turkey (10-13.10.2017)

The selection of the editorial contents of the journal is made after discussion with our Egyptian partner. The hand-picked technical articles cover the entire range of topics concerning cement manufacture and in particular also take into consideration the specific information requirements of the cement manufacturer in the countries of the Middle East.

AUCBM 22th Arab-International Cement Conference and Exhibition (November 2017, date and location to be announced)

ARABIC Edition

PD: 02.11.17AD: 12.10.17

1

PD: 15.12.17AD: 24.11.17


1The selection of the editorial contents of the journal is made after discussion with our Chilean partner. The hand-picked technical articles cover the entire range of topics concerning cement manufacture and in particular also take into consideration the specific information requirements of the cement manufacturer in the countries of Latin America.

5 PD: 30.10.17AD: 16.10.17

Oct. – Nov.

4

PD: 12.09.17AD: 25.08.17

Aug. – Sept.

CEMENTINTERNATIONAL


Advertisement sizes (examples)

1/1 pagein type area(172 mm wide x 265 mm high)

1/1 page bleed(216 mm wide x 303 mm high)

Different sizes on request

1/2 pagein type area(172 mm wide x 130 mm high)

1/4 pagein type area(84 mm widex 130 mm high)

1/8 pagein type area(54 mm widex 100 mm high) (84 mm wide

x 65 mm high)

1/3 page in type area(54 mm wide x 267 mm high)

(172 mm wide x 30 mm high)

Size of journal: DIN A4, 210 mm wide x 297 mm high

Advertisement type area: 172 mm wide x 265 mm high

Bleed: 216 mm wide x 303 mm high

Special left or right page opposite topositions: the index, back cover, inside back € 200 cover and other special positions US$ 260 Colour charges: per colour, per page (European range) € 350 (special colours on request) US$ 400

for smaller sizes from 1/8 page € 110 / US$ 125 Advertisementsover gutter: Lumbeck process

Classified per mm line (84 mm wide) € 3.00 / US$ 3.40advertisements: per mm line (172 mm wide) € 6.00 / US$ 6.80

50% discount for situations wanted ads box number charge € 14 / US$ 16 (including postal costs)

Publisher: Verlag Bau+Technik GmbH Steinhof 39, 40699 Erkrath, Germany ID No. DE 119260642 Tel. +49 (0) 211 / 92499-0

Terms of payment: pay immediately without reduction

Bankers: Commerzbank AG Bank routing code: 300 800 00 Account No. 06 955 575 00 IBAN DE93 3008 0000 0695 5575 00 SWIFT-BIC COBA DE FF XXX

Rate publication within one yearreduction: 3 times 5 % 6 times 10 %

publication within two years 12 times 15 %

Bound 2-page: € 2 500 / US$ 2 900 inserts: 4-page: € 3 500 / US$ 4 000 additional sizes on request only one company can submit one bound insert; to be supplied untrimmed and from 4-pages upwards folded

Delivery B.O.S.S Medien GmbHaddress: von-Monschaw-Straße 5, 47574 Goch, Germany (with the remark: For the Attention of CEMENT INTERNATIONAL)

Printing process: offset Printing material: print-ready PDF including colour proof

(172 mm widex 65 mm high)

Form

ats

and

rate

s



Advertising price list No. 15 valid from 01.01.2017

Home office:Tel.: +49 (0) 6123 / 605-193Fax: +49 (0) 6123 / 605-194Mobile: +49 (0) 159 04186496e-mail: [email protected]

Günther Jung Advertising Manager

Publishing house:Tel.: +49 (0) 211 / 92499-35Mobile: +49 (0) 159 04186496e-mail: [email protected]

Your direct line to the cEMENT INTERNATIONAl advertising department

Form

ats

and

rate

s

Advertisement formats and rates (Euro / US$ net):Format width x height b/w 2 colour 3 colour 4 colour

Front cover (only 4 colour) 214 x 210 mm – – – € 3 400 / US$ 3 850

Front cover combined withfirst 2/1 page with bleed (only 4 colour)

214 x 210 mm432 x 303 mm

– – – € 7 400 / US$ 8 360

2/1 page with bleed 432 x 303 mm € 3 260 / US$ 3 690 € 3 960 / US$ 4 500 € 4 660 / US$ 5 300 € 5 360 / US$ 6 100

1/1 page1/1 page with bleed

172 x 265 mm216 x 303 mm

€ 1 630 / US$ 1 850 € 1 980 / US$ 2 240 € 2 330 / US$ 2 640 € 2 680 / US$ 3 030

2/3 page2/3 page with bleed

114 x 267 mm138 x 303 mm

€ 1 290 / US$ 1 460 € 1 640 / US$ 1 855 € 1 990 / US$ 2 250 € 2 340 / US$ 2 650

1/2 page cross1/2 page cross with bleed1/2 page high1/2 page high with bleed

172 x 130 mm216 x 153 mm

84 x 265 mm 108 x 303 mm

€ 900 / US$ 1 020 € 1 250 / US$ 1 415 € 1 600 / US$ 1 810 € 1 950 / US$ 2 205

1/3 page cross1/3 page high1/3 page high with bleed

172 x 87 mm54 x 265 mm76 x 303 mm

€ 630 / US$ 715 € 980 / US$ 1 110 € 1 330 / US$ 1 505 € 1 680 / US$ 1 900

1/4 page cross1/4 page high

172 x 65 mm84 x 130 mm

€ 490 / US$ 560 € 840 / US$ 950 € 1 190 / US$ 1 350 € 1 540 / US$ 1 750

1/8 page cross1/8 page cross1/8 page high

172 x 30 mm84 x 65 mm54 x 100 mm

€ 270 / US$ 310 € 380 / US$ 440 € 490 / US$ 560 € 600 / US$ 690

1/16 page 84 x 30 mm € 165 / US$ 190 € 275 / US$ 320 € 385 / US$ 420 € 495 / US$ 570


CEMENTINTERNATIONAL


Distribution: China Circulation: 5 000 copiesIssue No. 1: PD: 21.04.17 | AD: 31.03.17

Quality through competence – our partner in China!

cEMENT INTERNATIONAl publishes an issue in the Chinese language twice per year. The Chinese edition is specially tailored to meet the needs of the Chinese reader and is pro-duced in Beijing by the official state Institute of Technical Information for Building Materials Industry of China (ITIBMIC) and the National Cement Information Network (NCIN) under the editorial direction of Professor Dr.-Eng. Cui Yuansheng.

Chinese edition

Advertisement formats and rates (Euro / US$ net):Format b/w 2 colour 3 colour 4 colour

Front cover (only 4 colour) – – – € 2 885 / US$ 3 250

2/1 page € 3 260 / US$ 3 690 € 3 960 / US$ 4 500 € 4 660 / US$ 5 300 € 5 360 / US$ 6 100

1/1 page € 1 630 / US$ 1 850 € 1 980 / US$ 2 240 € 2 330 / US$ 2 640 € 2 680 / US$ 3 030

1/2 page € 900 / US$ 1 020 € 1 250 / US$ 1 415 € 1 600 / US$ 1 810 € 1 950 / US$ 2 205

1/3 page € 630 / US$ 715 € 980 / US$ 1 110 € 1 330 / US$ 1 505 € 1 680 / US$ 1 900

1/4 page € 490 / US$ 560 € 840 / US$ 950 € 1 190 / US$ 1 350 € 1 540 / US$ 1 750

Chin

ese

edit

ion

Professor Dr.-Eng. Cui Yuansheng

Prof. Dr.-Eng. Cui Yuansheng studied construction engineering at the faculty of civil engineering of the Harbin Institute of Technology, China, and was also awarded a bachelor’s degree in the field of ce-ment technology. After graduating from university he worked for Surabuli Cement in Thailand in connection with the consulting service for erection of cement works by a group of Chinese experts. Professor Cui is vice president, general engineer, director of the Science & Technology Committee, and director of the Assessment Committee and holds technical posts at both the intermediate and high

levels of the Institute of Technical Information for Building Materials Industry of China (ITIBMIC). He is also deputy man aging director of the National Cement Information Network (NCIN). He was awarded first prize at the ministry level for the research project “The Development of the Strategy of the Building Materials Industry of China Across the Century“, and also made important proposals in the research project “The Direction of the Restructuring of the Chinese Cement Industry“. He masterminded and successfully organized the first Beijing Interna tional Cement & Equipment Exhibition. Professor Cui founded and holds the position of editor-in-chief to the Chinese-based magazine CEMENT and the Chinese-based magazine RMC (Ready-Mixed Concrete).

10

A 1/1 page company or product information feature at a special price of € 550 / US$ 630

PLEASE NOTE!In addition to your advertisement in the smallest size of one half page, we can also offer you:

CHINESE Edition

Asia




2/1 page € 3 260 / US$ 3 690 € 3 960 / US$ 4 500 € 4 660 / US$ 5 300 € 5 360 / US$ 6 100

1/1 page € 1 630 / US$ 1 850 € 1 980 / US$ 2 240 € 2 330 / US$ 2 640 € 2 680 / US$ 3 030

1/2 page € 900 / US$ 1 020 € 1 250 / US$ 1 415 € 1 600 / US$ 1 810 € 1 950 / US$ 2 205

1/3 page € 630 / US$ 715 € 980 / US$ 1 110 € 1 330 / US$ 1 505 € 1 680 / US$ 1 900

1/4 page € 490 / US$ 560 € 840 / US$ 950 € 1 190 / US$ 1 350 € 1 540 / US$ 1 750

russ

ian

edit

ion

11

cEMENTINTERNATIONAl

Quality through competence – our partner in the CIS States!

cEMENT INTERNATIONAl publishes an issue in the Russian language once per year. The “Russian Edition” is closely tailored to meet the require-ments of readers in the states of the former Soviet Union (CIS). It is produced on the spot in Kiev in the Ukraine by the V. D. Glukhovsky State Scientific Research Institute for Binders and Materials of the National University of Civil Engineering and Architecture. The editorial direction is in the hands of Professor Dr. Pavlo Kryvenko. His close contact to the Russian and the Ukrainian cement industries, which have grown during his long career of 40 years, guar-antees widespread distribution of the journal within the CIS target group without any loss due to waste scatter dispersion.

Russian edition

Distribution: Russia and CIS States Circulation: 1 000 copiesIssue No. 1: PD: 07.07.17 | AD: 12.06.17

Professor Dr. Pavlo Kryvenko

Professor Dr. Pavlo Kryvenko is director of the V. D. Glukhovsky State Scientific Research Institute for Binders and Materials at the re nowned National University of Civil Engineering and Architecture, Kiev, the Ukraine. As a scientist he has had over 600 papers and technical articles published in international technical journals, conference volumes and in ten books. Professor Kryvenko holds more than 120 patents in the states of the former Sovi-et Union (CIS) and well as twelve international patents. He is a mem-ber of several acadamies, societies and committees, such as for exam-

ple, the Academy of Engineering Sciences of the Ukraine, the Academy of Civil Engineering of the Ukraine, the Ukrainian Chemical Society and the American Society of Civil Engineers. In addition, he is director of the Technical Committee for Standardization of Building Materials of the State Committee of the Ukraine for Construction. In the production of the Russian edition of cEMENT INTERNATIONAl Professor Kryvenko is assisted by Dr. Elena S. Kavalerova, who has a reputation as an excellent scientist and as an English/Russian translator. In this capacity, she has translated several scientific books and has acted as a simulta neous interpreter at conferences of the V. D. Glukhovsky State Scientific Research Institute for Binders and Materials.



Asia

RUSSIAN Edition

CEMENTINTERNATIONAL


cEMENT INTERNATIONAl publishes an issue in the Arabic language once per year. The “Arabic Edition” is closely tailored to meet the requirements of the Arab reader and is pro-duced on the spot in Cairo by the G&W Science and Engineering Institute, which is headed by Professor Dr. rer. nat. Hanaa Yousef Ghorab. At her side is the chairman of the El Nahda Indus-tries Co, Eng. Nabil Sayed El-Gabry. Through close contact to the Arab Union for Cement and Building Material, widespread distribution of the journal is guaranteed within the Arabian target group without any loss due to waste scatter dispersion.

Quality through competence – our partner in the Middle East!

aRabiC edition

Distribution: Middle East Circulation: 1 000 copiesIssue No. 1: PD: 02.11.17 | AD: 12.10.17

Professor Dr. rer. nat. Hanaa Yousef Ghorab

Before her retirement, Professor Dr. rer. nat. Hanaa Yousef Ghorab taught Applied Physical Chemistry at the renowned Helwan University in Cairo, Egypt, where she also held the office of vice dean of the Faculty of Sciences. Today she is director and owner of the G&W Science and Engineering Compa-ny with head office in Cairo. Founded in the year 1998, G&W offers consultancy services in the fields of cement and concrete, such as for example, X-ray diffractometry, electronmicroscopy and thermoanalysis. In cooperation with other institutes in the Arabian area, G&W carries

out quality control, research projects and product developments. In the production of the Arabian issue of cEMENT INTERNATIONAl, Professor Ghorab will be assisted by Eng. Nabil Sayed El-Gabry, the chairman of the El Nahda Industries Co in Egypt. With an annual production of over 3 million tonnes of cement, the National Cement Company counts as a major company in the Arabian area. Together with Professor Ghorab, Mr. El-Gabry is responsible for the selection of the contents and for the correct translation of the articles into Arabic. G&W is an associate member of the Arab Union for Cement and Building Materials (AUCBM) and a full member of the National Cement Company, through which there are excellent contacts to the entire Arab world.

arab

iC e

diti

on


12




2/1 page € 3 260 / US$ 3 690 € 3 960 / US$ 4 500 € 4 660 / US$ 5 300 € 5 360 / US$ 6 100

1/1 page € 1 630 / US$ 1 850 € 1 980 / US$ 2 240 € 2 330 / US$ 2 640 € 2 680 / US$ 3 030

1/2 page € 900 / US$ 1 020 € 1 250 / US$ 1 415 € 1 600 / US$ 1 810 € 1 950 / US$ 2 205

1/3 page € 630 / US$ 715 € 980 / US$ 1 110 € 1 330 / US$ 1 505 € 1 680 / US$ 1 900

1/4 page € 490 / US$ 560 € 840 / US$ 950 € 1 190 / US$ 1 350 € 1 540 / US$ 1 750

٧٧

U�

dA�«

—U³

š√

Mondi Industrial Bags �ــــثـــــــــــل إحــــدى قــــطـــــاعــــات أعــــمــــال

شـــــركــــة Mondi Europe & International Division; وتـــــعــــتــــبــــرالــشـركـة رائـدة في إنـتــاج األكـيـاس الــورقـيـة الـصــنـاعـيــة في الـعـالم١.يصل حجم مبيـعات القطــاع إلى حوالي ٥ بـليون كيس/عام. بفضلMondi Industrial Bags النطـاق الواسع �واصفـات األكيـاس� يقومبـخـدمة صـنـاعـات اسـتـراتيـجـيـة مـثل صـنـاعة األسـمـنت ومـواد الـبـناء�بـاإلضـافــة إلى الـصـنـــاعـات الــكـيـمـاويـة والـغــذائـــيـة واحلـبـوب. هـذاالــقـطــاع الــتـجــاري يــقـوم بــتــشــغـيـل شــبـــكــة مـكــثــفـة تــعــمــــل لــصـالحا�بيعات وتقديـم ا�دمات� وتشغيل قسم ا�عـــدات ا�تخصصة �ألBag Application Center ومــــركـــز أبـــحـــاث Natro Tech األكـــيــــاســــكـرة ــــر واخــتـبــار احلـلــول ا�ــبـتـ ــ ــ ــ ــــون بـأعــمــال الـتــطـوي ــ ــه الــبــاحـث يــقــوم فـيـ

لعمليات التغليف. اجلـــيـل اجلـــديـــــــــــد من األكـــيــــــــاس ا�ــــقــــــــاومـــة لـــلـــمـــاء وأحـــــــدث.HYBRIDPRO هـي Mondi Industrial Bags مــــــــــنــــــــــتــــــــــجـــــــــات

HYBRIDPRO مـصـمـمـة لـتـعبـئـة مـواد الـبـنـاء وتـسـويـقـهـا حتت شـعار

"Made of PaPEr-combining the best of both worlds"أو "مُـــصــنَـع من الــورق - يـــربط أفـــضل مـــا في الـــعــا�ـــ�". وبـــفــضلالــطــرق ا�ــتــخــصــصــة في تــصـــنــيع األكــيــاس الــورقــيــة� تــتــمــتع هــذه

األكــيـاس بــجــمــيع خــواص األكـيــاس ا�ــصـنــعــة من الــبالســتك� وقـدأصـبـحت تتـمـيـز بطـبـقة خـارجـيـة من البـولي ايـثيـلـ� عـالي الكـثـافةمــعـــروفــة بــإسم HDPE. هــذه األكــيـــاس لــهــا قـــوة حتــمل تـــغــيــراتالـــطـــقس و�ــكـــنـــهــا أن حتـــفظ ا�ـــواد لــفـــتــرة أطـــول� وهي تـــنــافساألكـــيـــــــاس الـــورقــــــــيـــة ا�ـــعـــتـــادة فـي ســـرعـــة مـأل ا�ــــــــواد. أي أنأكــيـاس HYBRIDPRO تــســمح بــفــتــرة تـــخــزين أطــول لــلــمــواد فيالـعـراء� فطـبـقـة البـولي ايـثيـلـ� الـعازلـة تـقوم بـوقـايـتهـا من األمـطار

ومن تسرب الرطوبة.

ا�ميزات:

وقاية �تازة من تغيرات الطقس عند التخزين في العراء •

FFS ال حتتاج للتكلفة الباهظة ألنظمة الـ • • لها مظهر المع جذاب و�كن طبعها بحتى ثمانية ألوان

• تتميز بسرعة ا�أل وسرعة تفريغ الهواء • صـديـقـة لـلبـيـئـة: خـفيـفـة الـوزن� يـسهل فـصل مـكـونـاتـها من

البالستيك والورق إلعادة التدوير

�زيد مـن ا�علومات عن منتج HYBRIDPRO� برجاء االطالع علىwww.mondigroup.com/hybrid-pro ا�وقع اإللكتروني

و�ــكــنك الـتــعــرف عــلى قــائـمــة مــنــتـجــات شــركـة Mondi لــلـحــلـولا�بتكرة لألكياس الورقية من خالل الفيديو التالي:

Mondi ١ وفقـا حلـجم البـيعـات. ا�صـدر: دراســــــــــة � إعـدادها لـصـــــــالحمن قبل Eurosac, Freedonia World Industrial Bags وتقييم إداري.

Mondi Industrial Bags

Africa

ARABIC Edition


Team

13

lati

n am

eriC

an e

diti

on

cEMENTINTERNATIONAl

13

Quality through competence – our partner in Latin America!

cEMENT INTERNATIONAl publishes a bilingual issue in the Spanish and Portugese languages once per year. The “Latin American Edition” will be closely tailored to the re quirements of readers in the Latin American countries. It is produced locally in Santiago de Chile, Chile by Graduate Engineer César Cataldo. Due to his excellent contacts to the Latin American cement industry, established during his 20-year activities at various different cement industry companies in the region, optimal distribution of the journal with no random scatter loss is guaranteed. Assisting him will be Sandra Henschel, who has received well- founded and professional training and education as a translator and has had many years of career experience in the translation of technical journals.

LaTin aMeRiCan edition

Distribution: Latin America Circulation: 1 000 copiesIssue No. 1: PD: 15.12.17 | AD: 24.11.17

Dipl.-Ing. César Cataldo

Dipl.-Ing. César Cataldo studied mechanical engineering at the Technical University of Valparaíso, Chile. He began his professional career at Cemento Melón, the cement manu-facturer with the strongest market position in Chile, as a maintenance engineer for underground mining at El Navío. Subsequently, he moved to Germany, studied production economics and management at the Technical University Berlin and acquired experience as a technical translator. After his return to Chile, he again worked at Cemento Melón as a project engineer at the cement works

La Calera. Following this, he worked as technical manager for the German company Schenck Process in Chile. Today, César Cataldo is active as senior technical consultant for the cement industry in South America, with focus on maintenance and production processes as well as project engineering.

Sandra Henschel studied Hispanistics at the Humboldt University in Berlin and economics at the Technical University Berlin, before going to Chile to work as a translator. She specialises in scientific/technical literature and in the translation of technical journals from various different industrial branches.

ceMento internAcionAl ciMento internAcionAl

Soluciones de intralogística individualizadas y eficientes

BEUMER ofrece sistemas sostenibles

El Grupo BEUMER con casa matriz en Alemania y compa-ñías del grupo en todo el mundo, es un proveedor integral de soluciones de sistema individualizadas que proporcio-nan una mayor eficiencia en la industria del cemento. El crecimiento gestionado, la presencia en el mercado global y un amplio rango de productos en las áreas de tecnología de transporte, carga, llenado, paletizado y envasado asegu-ran el éxito a largo plazo de la compañía. En el Grupo BEUMER trabajan actualmente cerca de 4.000 personas en todo el mundo y generaron una facturación anual de aprox. 680 millones de euros en el año 2014. El Grupo BEUMER ofrece un amplio soporte al cliente para todos sus produc-tos y sistemas completos – en todos sus desarrollos – con enfoque en la sustentabilidad. El portafolio de BEUMER incluye correas transportadoras cóncavas para el transporte continuo y económico de grandes cantidades de piedra caliza, por ejemplo desde la cantera hasta la planta. El Grupo BEUMER desarrolla apiladores y rascadores de puente, los componentes esenciales para los lechos de mezcla, que apilan todo tipo de graneles en forma confiable, garantizando un resultado de mezcla óptima. Dado que la producción de cemento consume grandes cantidades de energía, el Grupo BEUMER ofrece sistemas para usar fuentes de energía alternativas llamadas AFR [alternative fuel and raw materials] estableciendo por lo tanto su nuevo campo comercial en los sistemas AFR.

Para cargar rápidamente el cemento terminado y sin generar polvo en los vehículos de transporte a granel, BEUMER ofrece cabezales de carga a granel y también sistemas de carga para materiales a granel en bolsas ya sea en camiones, barcos y vagones. De este modo, como proveedor único está ofreciendo equipamiento y sistemas para líneas de envasado de una sola fuente: BEUMER expandió su portafolio de productos con el BEUMER fillpac® para el llenado de cemento en los más variados tipos de bolsas. La serie paletizadora a capas BEUMER paletpac® paletiza las bolsas de cemento permitiendo la formación de pilas precisas y estables. Además, BEUMER ofrece el BEUMER stretch hood® para el embalado con film estirable sobre palets enteros de cemento para el trans-porte seguro y el almacenamiento en el exterior, con protección contra la humedad, la radiación ultravioleta y la suciedad.

Soluções de intralogística individuais e eficientes

A BEUMER oferece sistemas sustentáveis

O BEUMER Group com sede na Alemanha e empresas do Grupo em todo o mundo, é um fornecedor de soluções integradas de sistemas individualizados que proporcionam maior eficiência na indústria de cimento. O crescimento gerenciado, presença no mercado global e uma vasta gama de produtos nas áreas de tecnologia de transporte, carga, enchimento, paletização e embalagem asseguram o sucesso da empresa a longo prazo. Atualmente, cerca de 4.000 pessoas trabalham no BEUMER Group ao redor do mundo, gerando um volume de negócios anual de aprox. 680 milhões de euros em 2014. O O BEUMER Group oferece um suporte ao cliente abrangente para todos os produtos e sistemas completos – em todos os seus empreendimentos – com foco na sustentabilidade. O portfólio da BEUMER inclui, por exemplo, correias trans-portadoras côncavas para o transporte contínuo e econômico de grandes quantidades de calcário da pedreira para a fábrica. O BEUMER Group desenvolve stackers e reclaimers, componentes essenciais para a mistura, que empilha todo o tipo de produtos a granel de forma confiável, garantindo um resultado de mistura otimizado. Devido às grandes quantidades de energia que a produção de cimento consome, o BEUMER Group oferece sistemas que empregam fontes de energia alternativas chamadas AFR (alternative fuel and raw materials) estabelecendo, portanto, seu novo campo comercial nos sistemas AFR.

Para carregar rapidamente o cimento (terminado) sem gerar pó nos veículos de transporte a granel, a BEUMER oferece trombas de carga a granel e, também, sistemas de carga para materiais a granel ensacados, seja em camin-hões, navios ou vagões. Deste modo, como fornecedor completo, oferece equipamentos e sistemas para linhas de embalagem de uma só fonte: a BEUMER expandiu seu portfólio de produtos com o BEUMER fillpac® para enchi-mento de cimento nos mais variados tipos de sacos. A linha de paletizadoras BEUMER paletpac® paletiza os sacos de cimento permitindo a formação de uma pilha precisa e estável. Além disso, a BEUMER apresenta o BEUMER strech hood® para a embalagem com filme estirável sobre paletes inteiros inteiros de cimento para o transporte seguro e a armazenagem no exterior, com proteção contra a umidade, a radiação ultravioleta e a sujeira.

INFO

RMAC

IÓN

DE EM

PRES

AS





2/1 page € 3 260 / US$ 3 690 € 3 960 / US$ 4 500 € 4 660 / US$ 5 300 € 5 360 / US$ 6 100

1/1 page € 1 630 / US$ 1 850 € 1 980 / US$ 2 240 € 2 330 / US$ 2 640 € 2 680 / US$ 3 030

1/2 page € 900 / US$ 1 020 € 1 250 / US$ 1 415 € 1 600 / US$ 1 810 € 1 950 / US$ 2 205

1/3 page € 630 / US$ 715 € 980 / US$ 1 110 € 1 330 / US$ 1 505 € 1 680 / US$ 1 900

1/4 page € 490 / US$ 560 € 840 / US$ 950 € 1 190 / US$ 1 350 € 1 540 / US$ 1 750

South America


CEMENTINTERNATIONAL


e-Jo

urna

l

Banner advertising for the E-JournalcEMENT INTERNATIONAl as E-journal, the digital version of the journal, has already been introduced to our readers as from issue 01.2011. It is possible to leaf through each new issue on the screen in the form of what is called a Flip Book. Immediately after publication of the issue, each subscriber to cEMENT INTERNATIONAl receives per newsletter a link, with which he or she can quite simply reach the Flip Book of the latest issue.

The advantages for readers are very clear: • full access immediately: every subscriber

can start reading, as soon as the issue is published.

• easy to use and reader friendly: zooming of the individual articles or advertise-ments

A longtime reader wish has come to fruition! The advantages for advertisers are evident: • prime placement of the banner on our

start page • linking of your banner to your homepage• linking of your advertisement to your

homepage• a good opportunity for advertising in close

proximity to your target groups All this and at our very reasonable prices too!

Formats and rates (Euro / US$ net):Format: 213 x 71 Pixel by 72 dpi (75 mm width x 25 mm height)

Data format: GIF or JPEG in the RGB mode

Banner for one issue € 185 / US$ 210

Banner for three issues € 500 / US$ 570

Banner for all six issues € 890 / US$ 1 010

PLEASE NOTE! In addition to your banner, if you would also like a link from your advertisement to your Internet page, this would cost a processing fee of € 25 / US$ 29, per issue ordered


Dear Sir/Madam

Welcome to the homepage of the currentissue of CEMENT INTERNATIONAL.Simply click on the cover of the new issueand your exclusive E-Journal will appearimmediately!


subs

CriP

tion

s

The subscription price for cEMENT INTERNATIONAl shows that quality does not have to be costly. Annual subscription rate abroad € 318 / US$ 355 including postage costs. Single issue price € 58 / US$ 65 including postage costs.

Easy ordering at www.verlagbt.de

Subscriptions – quality at a fair price

Print issue E-Journal


cEMENT INTERNATIONAl the official organ of the (German Cement Works Association)

and of the Hungarian Cement Association

44 CEMENT INTERNATIONAL 4 4/2016 4 VOL. 14

PROD

UCTS

hoppers, with a cross beam for crane or fork-lift truck or with a cross cutter for slitting big bags, are available to upgrade the unit.

A rocker device has also been developed for easier emptying of big bags. This uses a number of “boxers” to loosen bulk materials that have a tendency to bridge and form blockages at the inlet area. Smooth running can be ensured by an impactor – electrical or pneumatic – and, if necessary, cell meters or gate valves can be used for even filling of the conveyor.

One hundred per cent dust-proofing is guar-anteed by the “Premium” loading unit with its pneumatically inflatable sealing collar, double bellows, integrated filter unit, height adjustment by electrical winch, closure cone, filling level indicator and innovative control system. As an option the BULKup, including accessories, can also be supplied in a stain-less steel version.

Available in two sizes

Two alternatives are available depending on the delivery volume required: BULKup BU 135 with a conveying capaci-ty up to max. 25 m3/h and a drive power of approx. 3 kW or BULKup BU 200 with a conveying capacity up to max. 60 m3/h and a drive power of approx. 7.5 kW.

Test, lease or buy

The design combines outstanding economy with high Schrage quality. The series production also ensures very competitive pricing. If preferred, the BULKup can also be leased instead of purchased. The electrically driven system can also be tried out under real operating conditions at the customer’s own business or at Schrage’s technical centre in Friedeburg.

The BULKup in comparison with other systems

The market in general offers a number of different technol-ogies for bulk handling – but these are mostly screw or belt conveyors.

In contrast to these systems, the new BULKup also allows very fine free-flowing products to be conveyed at a 45° angle. Extremely high reverse flow of the product can be expect-ed at such a delivery angle with screw conveyors while bulk transport on an open conveyor belt is even worse. With the BULKup the bulk material is not agitated in the individ-ual chambers between the conveyor discs so there is no segregation of mixed products during transport, and thanks to the low chain speed the product is also treated very gently.

All important aspects at a glance

The mobile BULKup is an efficient loading aid that can save time, reduce logistical costs and minimise operating and per-sonnel costs. Other advantages are its quick and economical start-up and high level of availability. No adaptations or con-version measures are required at the loading location itself. The conveying system can be set up at any desired location with a 400 V connection.

The BULKup is also characterised by its low-noise and almost maintenance-free operation and low power consumption. It is only necessary to check the chain tension and the wearing parts at intervals. Other advantages are its easy and safe han-dling and accident-free and reliable operation, even by one person, as well as the long service life, excellent price/per-formance ratio and the enormous shortening of transfer and loading times. It also minimises the risk of accidents when loading toxic or explosive substances.

The conveying system is delivered fully assembled in a con-tainer by truck or sea freight.

The BULKup is ideal when bulk material has to be handled and short conveying distances have to be bridged with a quick, simple, inexpensive and mobile solution. 3

Figure 3: The BULKup transports nearly all types of bulk solids gently and safely

Figure 4: The BULKup can be equipped with various feed hoppers for sacks and big bags or filling by wheel loader

To get more out of your plant, visit www.khd.com

Get More Out Of Your Alternative Fuels

With KHD PYROJET®

KHD’s PYROJET® Burners are raising the bar in environmental

stewardship by combining the highest possible alternative fuel rates with

the lowest amount of harmful emissions, outfitted with flexible connection

systems to easily integrate into existing plants. No burner on the market

meets the same standards for production quality and efficiency.

Throughout our 160 year history, KHD has focused on developing products that do more than just generate higher output. We’ve focused on creating innovative

products that help make a positive impact on our environment without losing out on performance.

get more out of your plant.

Lake Garda, ItalyJust one of the many environmental neighbors of KHD Humboldt Wedag

CLEANTECHNOLOGIES

42-45_Schrage_CS5.indd 44 19.09.16 12:20

CEMENT INTERNATIONAL 4 4/2016 4 VOL. 14 45

PROD

UCTS

To get more out of your plant, visit www.khd.com

Get More Out Of Your Alternative Fuels

With KHD PYROJET®

KHD’s PYROJET® Burners are raising the bar in environmental

stewardship by combining the highest possible alternative fuel rates with

the lowest amount of harmful emissions, outfitted with flexible connection

systems to easily integrate into existing plants. No burner on the market

meets the same standards for production quality and efficiency.

Throughout our 160 year history, KHD has focused on developing products that do more than just generate higher output. We’ve focused on creating innovative

products that help make a positive impact on our environment without losing out on performance.

get more out of your plant.

Lake Garda, ItalyJust one of the many environmental neighbors of KHD Humboldt Wedag

CLEANTECHNOLOGIES

42-45_Schrage_CS5.indd 45 19.09.16 12:20

cEMENT INTERNATIONAl is a reader-friendly journal, as a result of its appealing and attractive layout, which has been proved by the results of a questionnaire: Readers spend an average of 1.20 hours reading cEMENT INTERNATIONAl before it is forwarded on, mostly through the firm’s circu-lation system to several co-workers. Due to this internal circulation, it reaches approximately ten readers per issue, i.e., ten readers x 3 718 distribution copies = 37 180 reader contacts per issue! After reading, cEMENT INTERNATIONAl is not discarded, but saved and filed for future reference.

cEMENT INTERNATIONAl offers readers topical and well-sub stantiated technical articles from all areas of cement technology, selected by its highly competent editorial team and is thus counted as the No. 1 source of information for everyone concerned with the manufacture and properties of the binders cement, lime and gypsum and ready-mixed mortar. As a result of the factual and informative report-ing, cEMENT INTERNATIONAl is mainly addressed to the specialized management responsible for decision-making in the technical area and for the planning of new investments, current measures and modernization projects.

Dear Sir/Madam

Welcome to the homepage of the currentissue of CEMENT INTERNATIONAL.Simply click on the cover of the new issueand your exclusive E-Journal will appearimmediately!

WWW.VERLAGBT.DE/CEMENTINTERNATIONAL.HTM

COMPARE US …

… WITH ALL THE OTHER CEMENT-JOURNALS

PRACTICE-RELATED EXPERIENCE

Both reports on practical experience and up-to-date information from the areas of research and development are presented. Concomitant reports and short news items and announcement indicate to readers forthcoming trends in scientific-, product- and market developments.

INTERNATIONAL

CEMENT INTERNATIONAL with international orientation is bilingual (German/English). As the official organ of the Ger-man Cement Works Association (VDZ) and the Hungarian Cement Association, the journal can lay claim to the highest standards und superlative quality.

TARGET GROUP ORIENTED

Plant operators, staff at research- and testing institutes, from universities and public authorities, as well as representatives of the plant and supply industry are able to profit from the up-to-minute information featured on the latest findings from research and practice.

THE TECHNICAL JOURNALFOR THE CEMENT INDUSTRY

Anz_CI_A4_11_2014.indd 2 17.11.14 16:04

Cover picture, page one: © HeidelbergCement AG, Heidelberg, Germany

Documents

cEMENT - verlagbt.de · 2016-11-21 · Maintenance in the cement industry • Modern maintenance and repair schemes • Diagnostic techniques and maintenance management • Strategies