CENTRAL INSTITUTE OF TOOL DESIGNBALANAGAR HYDERABAD CCTV … · CENTRAL INSTITUTE OF TOOL DESIGNBALANAGAR HYDERABAD CCTV SURVEILLANCE SYSTEM TECHNICAL SPECIFICATION FOR CCTV SURVEILLANCE

CENTRAL INSTITUTE OF TOOL DESIGNBALANAGAR HYDERABAD CCTV SURVEILLANCE SYSTEM

TECHNICAL SPECIFICATION FOR CCTV SURVEILLANCE Page 1 of 16

INTRODUCTION

1.1 CENTRAL INSTITUTE OF TOOL DESIGN (CITD), Balanagar, Hyderabad-37

intends to implement state of the art IP SURVEILLANCE technology for general monitoring of common areas and for intrusion detection in its perimeter through proactive and analytical surveillance. Scope of the

project is briefly listed below:

1.2 Supply and Installation of state of the art, low light visual cameras both Bullet type and Dome types as mentioned in Annexures.

1.3 Supply and Installation of state of the art, Wide Dynamic Range visual

cameras. 1.4 Supply and installation of a comprehensive Centralized Video Management

System with a Central Monitoring Station with a video wall. 1.5 Interfacing all cameras from different locations through LAN to the Central

Monitoring Station.

1.6 Supply and implementation of all other associated hardware, software and licenses for VMSs, Analytical apps and IP surveillance cameras.

1.7 Maintenance of the system. TECHNICAL SPECIFICATION IS GIVEN AND INDEXED IN THE

FOLLOWING PAGES.

2 INDEX

Standard Specification Scope

Bids Design & Construction General Requirement

Service Inspection and Testing (FAT)

Site Acceptance Test Warranty Annual Maintenance Contract (AMC)

Rejection

Job Specification Application

System Description Vendor’s scope of supply (Bill of Materials)

Summary of IP SURVEILLANCE system

Data Sheet Fixed IR Bullet Camera (FIBC) IR Dome Camera

Fixed Wide-Dynamic Camera (FWS) Video Management System (VMS) – Server

Command Center Workstation Command Center Display

Minimum Required Qualification Criteria



STANDARD SPECIFICATION FOR IP SURVEILLANCESYSTEM

3 Scope

3.1 This Specification, together with the data sheets attached herewith,

covers the requirements for the Design, Materials supply, Testing, Inspection, Shipping, Installation and Commissioning of the IP surveillance system.

3.2 The related Standards referred to herein and mentioned below shall be of

the latest edition prior to the date of purchaser’s enquiry. 3.3 IP-66 Totally protected against dust. Protected against temporary flooding

of water, e.g. for use on ship decks - limited ingress permitted.

3.4 NEMA-4X Enclosures constructed for either indoor or outdoor use to provide a degree of protection to personnel against access to hazardous parts; to

provide a degree of protection of the equipment inside the enclosure against ingress of solid foreign objects (windblown dust); to provide a

degree of protection with respect to harmful effects on the equipment due to the ingress of water (rain, sleet, snow, splashing water, and hose

directed water); that provides an additional level of protection against corrosion; and that will be undamaged by the external formation of ice on the enclosure.

3.5 IK-10 Withstanding impact of 20 joule

3.6 UL60950IT Equipment Safety

In the event of any conflict between this specification, data sheets, related standards, codes, etc. the vendor should refer the matter to the purchaser

for clarification and only after obtaining the same should proceed with submitting his response to the items in question.

3.7 Purchaser’s data sheets indicate the minimum requirements of Camera,

Lens, Video Management System (VMS), intrusion detection system,

Central Monitoring System, Video Wall etc. However, this does not absolve the vendor of the responsibility for proper selection with respect to the

following:

3.8 Selection of lens focal length, camera resolution, monitor resolution, controllability limits of pan and tilt mechanism etc for proper monitoring.

3.9 Selection of compatible camera, controls unit and monitor for the special application.

4 Bids

4.1 Vendor’s quotation shall include a detailed specification sheet for each item providing all the details regarding type, construction, power supply

requirements, etc., of an IP surveillance system and its accessories. Following data MUST be furnished by vendor in their offer:



4.2 Minimum illumination required by camera to produce color image.

4.3 Voltage and frequency variation.

4.4 Interconnecting cable specifications. 4.5 Vendor shall provide detailed dimensional and sectional drawings including

mounting details for all the units offered. All dimensions shall be in millimeters.

4.6 The offer shall also include a block–diagram showing all units with model

numbers and interconnecting cabling with size and type indicated.

4.7 Vendor shall furnish certificate for weatherproof housing for offered

system from statutory authority along with the offer. 4.8 Vendor shall furnish a list summing up all the deviations, if any, from the

purchaser’s data sheets. Also vendor should provide reasons for these deviations wherever possible.

4.9 Vendor shall enclose catalogues giving detailed technical specifications

and their technical information for the items covered in the bid. 4.10 Vendor’s quotation, catalogues, drawings and maintenance manuals shall

be in English.

4.11Vendor shall also quote for the following:

Annual Maintenance Contract (AMC) for three years (year wise break-up

required), which will be used after expiring the warranty period. Vendor has to depute engineer for preventive maintenance (four visits per

annum) for preventive maintenance. Further vendor shall quote rate for emergency visit on Man-day basis for emergency problems. Based on the actual duration, payment will be made. CITD will maintain spares as per

vendor recommendation.

5 Design & Construction

5.1 Power Supply - The control system, monitors, camera video management system and other critical components of the IP SURVEILLANCE system

shall be connected to the organization’s power supply system: 230V AC +or- 10%, (60 Hz + or - 3Hz).

5.2 Degree of protection

The minimum enclosure protection degree for the system components shall be in accordance with IP66 as follows.

- Outdoor IP 66 minimum - Indoor IK10. - Panels with open door IP20 (Live parts shielded)



5.3 Cameras will be installed outdoors where conditions apply as per site and utility data.

5.4 The flame protection type of the electrical materials shall be in accordance

with the area classification and conform to IS: 5571. When certain materials require to be of a particular type of protection, this will be specified in the requisition.

5.5 All materials installed inside a hazardous area shall have a certificate of

conformity or a declaration of compliance issued by the appropriate authority.

6 General Requirements

6.1 The system shall include all hardware, wiring, cabinets, materials and application software for fully functional system as defined in the

requisition.

6.2 Components shall be of industrial quality. Consumer electronics is not allowed.

Camera, Lens, Housing, PT unit : As per data sheet

Analytical Applications : As per data sheet

Video Management System : As per data sheet

Client Machines : As per data sheet

Video Wall :As per data sheet

7 Service

7.1 Training -Supplier is required to provide training on system operation and

maintenance for 3 Technicians at CITD’s site. Vendor shall provide necessary training manual and instruction manual.

7.2 Installation and Commissioning - Supplier is required to install and commission the total system as per the technical specification and the

location drawings submitted by them. Cable laying is in the vendor scope. 8 Inspection and Testing

8.1 Vendor shall submit the following test certificates and test reports for purchaser’s review:

8.2 Performance test report.

8.3 Certificates form a statutory body for Weather Proof (IP 66) enclosures. 8.4 Dimensional drawing.

8.5 System architecture



9 Factory Acceptance Test (FAT)

9.1 Vendor shall be ready for test and demonstration of integrity of the

system hardware and software at vendor’s site on demand. If demanded, no material or equipment shall be transported until all required tests are successfully completed and certified 'Ready for Shipment' by CITD

deputed officials. Factory Acceptance Test shall be carried out in the presence of the CITD representatives. CITD can demand FAT procedure

from vendor at least four weeks in advance for its acceptance. Vendor shall intimate exact date of FAT at least two weeks in advance.

Following tests/checks shall be carried out as a minimum.

9.2 Physical dimensional checks and workmanship 9.3 Performance testing of all individual system and integrated system.

9.4 Review of all certificates and test reports as indicated in this specification.

10 Site Acceptance Test

10.1 The following site acceptance will be carried out as a minimum:

10.2 System Architecture Performance

10.3 Functional test of all individual and integrated components of the system.

Note: The detailed Site Acceptance procedure will be provided during the detailed engineering of the system.

11 Warranty

11.1 Vendor shall provide full warranty for the complete IP SURVEILLANCE system (All hardware and software supplied under this tender) and shall

be fully responsible in respect of proper design, quality and operation of the equipment, accessories etc. for a period of 12 months from the date of commissioning. Vendor shall include four periodically visit per annum for

preventive maintenance of the system during warranty period.

11.2 Vendor shall quote items required for fulfilling the warranty requirement other than mandatory spares as given in specification of this tender.

Vendor shall extend all technical assistance and support during warranty period for all works to be carried out to make system functional as per the specification without any price implication and time delay.

12 Annual Maintenance Contract (AMC)

12.1 Vendor shall offer Annual Maintenance Contract (AMC) for a period of

three years. The offer shall be year wise for three years. The AMC will come in to force after expiry of the warranty period. Owner shall maintain the spare parts as suggested by the vendor. Vendor shall make four

preventive maintenance visit per annum and shall extend technical support to maintain the system (Hardware as well as software). Further



vendor shall quote rate for emergency visit on Man-day basis for emergency problems. Based on the actual duration, payment will be

made.

13 Rejection

13.1 Vendor shall make his offer in detail with respect to every item of the purchaser’s specification. Any other not confirming fully to this shall be

summarily rejected. JOB SPECIFICATIONS

14 Application

14.1 IP Surveillance system will be used for general monitoring of common

areas and for perimeter view from Video wall monitors installed in Central Control Room.

15 System Description

15.1 This tender is intended to procure and install Cameras with features low-light image, Wide Dynamic Range, Infrared view etc for security

surveillance and connecting group of cameras through Video Management System(VMS) in the Central control room as per requirements. The VMS

are in turn connected to a separate CITDSURVEILLANCE LAN Network to provide viewing of these Cameras across the network only. However, the network should be plug and play for connecting to CITD’s existing

network. 15.2 For continuous monitoring during Day / Night, it is required to install the

Cameras which can work under very low light and change the mode from Colour to B/W through IR Cut filters. The cameras will be mounted in safe place and it shall be able to withstand harsh environment of CITD

perimeter(IP 66 enclosures).

15.3 Vendor shall prescribe suitable interconnect cables for camera, switches and workstation and video wall based on the connection diagram of the camera. Vendor has to provide technical catalog and other details to

substantiate cable selection. Wherever distance is more, it shall be preferred to use optical cables only.

15.4 Summary of Job:

- Design , Engineering - Manufacture

- Testing( Factory Acceptance Test and Site Acceptance Test) - Supply

- Installation - Commissioning - Training

- Documentation - Warranty



Vendor’s Scope of Supply (Bill of Materials)

16 Hardware:

16.1 Twenty Six Numbers of IR bullet cameras, locations as per Annexure-A.

16.2 Twenty Three IR dome cameras, locations as per Annexure-B.

16.3 One Wide Dynamic Range camera, covering the main entrance. 16.4 Centralised Video Management System with license of Sixty Four cameras.

16.5 VMS Server with 12*4 TB Hard disk space and providing recording for

atleast 30 days at full frame rate and resolutions. 16.6 1No of workstations at the Central Command center.

16.7 Eleven Smart PoE Switches for controlling and powering cameras.

16.8 Four Media Converters for fiber cable terminations.

16.9 04 nos of Display for Video Wall structure-40” wall mounted LED TV with

PIP for 16 cameras each

16.10 Mounting accessories for cameras and TV monitors

16.11 Over and above requirements if any accessories like Junction boxes, etc

are required for safe and successful operation shall be part of Vendor’s

scope of supply and work.

17 Software: 17.1 Video Management System (VMS) client software as per attached

technical specification with necessary license for each control room system as per requirements.

17.2 Client software to interact with all the proposed VMS simultaneously with

necessary license for 64 users as per attached technical specification.

Client software shall be Web enabled.



Summary of IP Surveillance system

18.1 Supply Portion:

Item Description Quantity Preferred Makes

Fixed IR Bullet Camera 26 Nos. Axis/Sony/Bosch/Pelco

IR Dome Camera 23 Nos. Axis/Sony/Bosch/Pelco

WDR Camera 01 Nos. Axis/Sony/Bosch/Pelco

VMS for 64 clients 1 Nos. Milestone/Mindtree/

QNAP/Videonetics

VMS + Recording Server 01 Nos. Milestone/Mindtree/

QNAP/Videonetics

Workstation 01 Nos. Lenovo/HP/Dell

08 port switch 11 Nos Cisco/Allied Telesis/Juniper

Media Converters 04 Nos Cisco/Allied Telesis/Juniper

Display for Video Wall 02 Nos Sony/Samsung/Barco

1 KVA UPS 15 Nos APC/Powertech/Remco

OFC cable with HDPE pipe As required

GI Pole As required

Other accessories As required

18.2 Service Portion:

Item Description Quantity

System installation and commissioning LUMP SUM

Control room Setup LUMP SUM

Annual Maintenance Contract (AMC) Year wise

DATA SHEET

Fixed IR Bullet Camera (FIBC)

19.1 The FIBC shall be composed of video camera, lens, IR LEDs, Housing,

interconnection cables and accessories. All to be included in the scope of

supply. Each FIBC shall only have one interconnection cable in order to lower the installation cost and increase operation safety. There shall be no

outside cabling between field cable junction box and camera housing. 19.2 Camera Function

- To capture and transmit images from perimeter and common areas

- Automatic control of image brightness (Electronic shutter) - Automatic control of lens iris - Automatic IR illumination on low lights

- Day and night Operation



19.3 Technical requirements

Sno Particulars Description

01. Camera Resolution

The Camera should be able to provide a resolution of 1080p(1920x1080) to 160x90 resolution in 25 fps

02. Image Sensor

Should be Progressive Scan based RGB CMOS 1/2.8” Sensor or better

03. Lens Should have avarifocal 3.5mm-9.5mm, IR Corrected autofocus, remote focus and zoom, P-Iris lens

04. Minimum Illumination

Camera should be able to produce color image @ 0.25 Lux @ F1.4 and b/w images @ 0.06lux , and with 0 lux with IR

illumination on.

05. Infrared The camera should have highly efficient LEDs with

adjustable intensity and angle of illumination. The camera should have less than 3 LEDs for covering atleast 15m

06. Day/Night vision

The camera should have automatically removable IR cut filter

07. Frame Rate The camera should be able to provide upto25 frames per second

09. Video Streaming

The camera should be able to provide multiple, individually configurable streams in H.264/Motion JPEG, with controllable frame rate and bandwidth with VBR/CBR in

H.264 mode.

09. WDR The camera should be able to provide WDR

10. Security The camera should have password protection, IP Address filtering, HTTPS encryption, IEEE 802.1x network access

control, Digest authentication, and User Access log

11. Protocols The camera should support IPv4/v6, HTTP, HTTPSc,

SSL/TLSc , QoS Layer 3 DiffServ, FTP,CIFS/SMB, SMTP, Bonjour, UPnPTM, SNMPv1/v2c/v3 (MIB-II),DNS, DynDNS,

NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP,DHCP, ARP, SOCKS

12. API The camera should provide for open API for software integration including camera OEM’s own API and Camera application platform

13. ONVIF The supplied camera should be ONVIF certified

14. Intelligent Video

The camera should have built in Video Motion Detection, Active Tampering Alarm, and ability to port third party applications on the edge.

15. Even Triggers

The camera should have event triggers for intelligent video, Edge storage events, and external inputs

16. Casing The camera casing should be polyester polycarbonate blend with a IP66 and NEMA 4X rated enclosure.

17. Memory The camera should have atleast 256 MB RAM with 128 MB flash

18. Power The camera should utilize Power of Ethernet IEEE 802.3af/802.3at Type 1 Class 3, max 11.2W

19. Edge Storage

Support for microSD/MicroSDHC/MicroSDXC slot supporting memory card upto 64 GB



20. Operating

Conditions

The camera should be able to operate in below conditions

1. -300 to 500 C with PoE 2. Humidity 10-100% RH (condensing)

21. Warranty The OEM should offer the warranty of Three years with local support office in India extendable to 5 years.

IR Dome Camera

20.1 Camera Function

The IR Dome camera is required to be mounted at indoor and outdoor areas in the building. It should have IR capabilities with WDR and low-light sensitivity to capture events at low light levels.



01. Camera Resolution

The Camera should be able to provide a resolution of 1080p(1920x1080) to 160x90 resolution in 50 fps

02. Image Sensor

Should be Progressive Scan based RGB CMOS 1/2.8” Sensor or better

03. Lens Should have a varifocal, remote focus and zoom 3.5 -10.5 mm or better lens

04. Minimum Illumination

Camera should be able to produce color image @ 0.25 Lux @ F1.4(with WDR) and b/w images @ 0.05 lux @ F1.4 (with WDR) and 0 lux with IR.

05. Infrared The camera should have highly efficient LEDs with adjustable intensity and angle of illumination. The camera should have

less than 3 LEDs for covering atleast 15m

06. Frame Rate The camera should be able to provide upto50 frames per

second

07. Video

Streaming

The camera should be able to provide multiple, individually

configurable streams in H.264/Motion JPEG, with controllable frame rate and bandwidth with VBR/CBR in H.264 mode.

08. WDR The camera should be able to provide WDR of upto 120 dB.

09. Security The camera should have password protection, IP Address

filtering, HTTPS encryption, IEEE 802.1x network access control, Digest authentication, and User Access log

10. Protocols The camera should support IPv4/v6, HTTP, HTTPSc, SSL/TLSc , QoS Layer 3 DiffServ, FTP,CIFS/SMB, SMTP,

Bonjour, UPnPTM, SNMPv1/v2c/v3 (MIB-II),DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP,DHCP, ARP, SOCKS

11. API The camera should provide for open API for software integration including camera OEM’s own API and Camera

application platform



The camera should have built in Video Motion Detection, Active Tampering Alarm, and ability to port third party

applications on the edge.



14. Multi-view The camera should have capability to crop out 2 different

view areas in the live image and provide separate streams for both.

15. Even Triggers

The camera should have event triggers for analytics and edge storage events

16. Casing The camera casing should be aluminum inner camera module with IP66 and NEMA 4X rated IK10 impact resistant casing dehumidifying membrane

17. Memory The camera should have atleast 512 MB RAM with 256 MB flash

18. Power The camera should utilize Power of Ethernet IEEE 802.3af/802.3at Type 1 Class 3, max 10.8w

19. Edge Storage


20. Operating Conditions

The camera should be able to operate in -300 to 500 C with Humidity levels of 10-100% RH (condensing)

21. Approvals The camera should have EN/IEC/UL certifications

22. Warranty The OEM should offer the warranty of Three years with local

support office in India extendable to 5 years.

Fixed WDR Camera (FWC)

21.1 The FWC shall be composed of video camera, lens, and housing, interconnection cables and accessories. All to be included in the scope of supply. Each FWC shall only have one interconnection cable in order to

lower the installation cost and increase operation safety. There shall be no outside cabling between field cable junction box, pan and tilt unit and

camera housing. 21.2 Camera Function

- To capture and transmit images from Main Gate

- Automatic control of image brightness (Electronic shutter) - Automatic Wide Dynamic Range control - Automatic control of lens iris

- Day and night Operation



01. Camera

Resolution

The Camera should be able to provide a resolution of

1920x1200 to 160x90 resolution in 50 fps

02. Image

Sensor

Should be Progressive Scan based RGB CMOS 1/2.8”

Sensor or better

03. Lens Should have an IR Corrected, varifocal, CS Mount,

Megapixel resolution P-Iris 3.0 – 8mm varifocal lens

04. Minimum

Illumination

Camera should be able to produce color image @ 0.18 Lux

and b/w images @ 0.04 lux @ F1.3

05. Frame Rate The camera should be able to provide upto 5oframes per

second



06. Video

Streaming

The camera should be able to provide multiple, individually

configurable streams in H.264/Motion JPEG, with controllable frame rate and bandwidth with VBR/CBR in H.264 mode.

07. WDR The camera should be able to provide WDR of upto 120 dB.

08. Image settings

The camera should have barrel distortion control, day/night shift levels, Electronic Image Stabilization, and defogging features

09. Audio The camera should have two-way audio streaming

10. Security The camera should have password protection, IP Address

filtering, HTTPS encryption, IEEE 802.1x network access control, Digest authentication, and User Access log

11. Protocols The camera should support IPv4/v6, HTTP, HTTPSc, SSL/TLSc , QoS Layer 3 DiffServ, FTP,CIFS/SMB, SMTP,

Bonjour, UPnPTM, SNMPv1/v2c/v3 (MIB-II),DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP,DHCP, ARP, SOCKS

12. API The camera should provide for open API for software integration including camera OEM’s own API and Camera

application platform



The camera should have built in Video Motion Detection, Active Tampering Alarm, Audio Detection and ability to port

third party applications on the edge.

15. Even

Triggers

The camera should have event triggers for intelligent video,

Edge storage events, external inputs and shock detection

16. Casing The camera casing should be metal(zinc) with an IP66 and

NEMA 4X rated IK10 impact resistant aluminum enclosure.

17. Memory The camera should have atleast512 MB RAM with 256 MB

flash

18. Power The camera should utilize Power of Ethernet IEEE

802.3af/802.3at Type 1 Class 3, max 12.95W or 25.5 W in High PoE

19. Edge Storage


20. Operating Conditions

The camera should be able to operate in below conditions 3. -300 to 500 C with PoE

4. -400 to 500 C with High PoE Midpsan 5. Humidity 10-100% RH (condensing)

21. Warranty The OEM should offer the warranty of Three years with local

support office in India extendable to 5 years.

22. Approvals The camera should have EN/UL/IEC approvals



22 Video Management Server Specification


01. Processor Quad-core Intel® i5-3.7 Ghz processor

02. Memory 8 GB DDR3 RAM

03. Form Factor 2U Form factor

04. Hard Disk 12nos of 4 TB SATA Enterprise drives

05. HDD Capacity 12 x hotswappable and lockable tray

06. Network Interface

4 Gigabit Ethernet port

07. Recording Throughput

450 Mbps

08. Video Output HDMI (Full HD; 1920x1080), VGA

09. Channel

Supported

64 channels

10. Local Display

Mode

FULL HD 1080p 300 FPS

Local Monitoring: Upto 36 channels per page Local playback: Upto 4 channels per page

11. Remote Monitoring

Multichannel, sequential and full screen display modes, max 64 channels per page

12. Remote Playback

Multichannel, sequential display mode upto 16 channels per page

13. Intelligent Video Analytics

Motion detection, missing object, foreign object, out of focus, and camera occlusion

14. Export Convert recording files into AVI/MP4

15. LAN Four Gigabit LAN with failover/load-balancing or multi-

IP Setting mode

16. Operating System

Embedded linux

17. Disk Management

Single disk, RAID 0, RAID 1, RAID5. RAID 5+ Hot Spare, RAID6, RAID6+ Hot Spare, RAID10, RAID10+

Hot Spare and JBOD/Linear Online RAID Capacity Expansion/Online RAID Level

Migration/HDD S.M.A.R.T./Bad blocks scan

18. Certifications CE, FCC, VCCI, BSMI, LVD

23 Command Center Workstation


01. Processor Intel Xeon Processor E3-1240 v3 (Quad Core HT, 3.40GHz Turbo, 8MB) or higher

02. Memory 8 GB DDR3 memory

03. Hard Disk 1 TB 3.5 inch Serial ATA (7200 rpm) HDD

04. DVD RW 16X DVD RW Drive



24 Command Center Display


01. Screen Size The screen size should be 32”

02. Panel Technology

The Panel should be 60Hz Direct LED backlight

03. Resolution The display should offer 1920 x 1080 resolution

04. Brightness The display should have brightness of 350 nits cd/m2

05. Contrast Ratio The display should have a contrast ratio of 5000:1

06. Viewing Angle The display should have a viewing angle of 1780/1780

07. Orientation The display should offer landscape and portrait both

orientation formats

08. Input The display should have VGA (D-Sub), DVI-D, Component

(CVBS common), HDMI, Stereo Mini Jack inputs

09. Output The display should have Stereo Mini jack output

10. External Control The display should have a RS232C(in/out) and RJ45 port

11. Power Supply The display should have a power supply of AC 100-240 V,

50/60 Hz and a power consumption of 65W in typical usage and 121 W max in any usage

12. Operating Temperature

The display should be able to operate in 00 - 400 C with 10-80% humidity

13. Additional Features

The display should have Built-in Speaker (10W + 10W), Magic Clone (to USB), Auto Source Switching & Recovery, Lamp Error Detection, Super Clear Coating, Temperature

Sensor, RS232C/RJ45 MDC, Plug and Play (DDC2B), Clock Battery, PIP/PBP, Video Wall (10x10), Image Rotation,

Button Lock, Smart Scheduling, Smart F/W update, Built-In MagicInfo (Lite, Premium-S, VideoWall-S)

14. Internal Media Player

The display should have Internal Media player with Cortex-A9 1Ghz Dual Core processor, 1GB DDR3 RAM, 4GB FDM,USB (2)

15. Bezel Width The display should not have a Bezel width more than 17.4 mm(bottom 22.00 mm)

16. Green Management

Display should have EMC emission standard and should be ENERGY STAR 5.0 and RoHS compliant

05. Graphics 1 GB NVIDIA QUADRO K600 Graphic card or higher

06. Operating System

Win 7 professional or higher



25 Minimum required qualification criteria

25.1 The bidder should be registered company in India for last three years and

attach copies of company incorporation certificate, three years balance sheet and PAN Card.

25.2 Sole vendor should have previous experience of installation & commissioning of IP based video surveillance system for government

projects ( at least 1) in last two years out of which at least one order from a government undertaking worth Rs 80 lakhs or more for any make of IP camera. Bidder to provide proof of the same.

25.3 Should have experienced professionals with adequate experience in

handling the devices/services of similar capacities. 25.4 The bidder should have a Branch office at Hyderabad to provide necessary

service support. Bidder to furnish their Hyderabad office address and TIN number for the same. The bidder should have minimum two certified

technical engineers from the camera OEM. 25.5 Must have the competency of catering to all the domains in the tender.

25.6 The main products (IP Camera and Video Management System) shall be

manufactured by a make whose quality system is in compliance with the ISO-9001.

25.7 All the camera and camera accessories should be from a single OEM only.

25.8 VMS offered should be ONVIF compliant 25.9 Attachment of all relevant datasheets of the products being offered along

with Technical Bid is compulsory.

25.10 If required, the TEC may ask demonstration during Technical Evaluation. Schedule for the same will be informed in advance.

25.11 OEM should have Existence for more than 5 years in India. None of the products quoted should have been declared end of life at the time of

delivery.

25.12 All systems and components must be in compliance with FCC, CE, UL and RoHs requirements.

25.13 The vendor should be able to provide effective maintenance services after the implementation of the above project.

25.14 Vendor to provide Manufacturer Authorization Form from Camera and VMS

OEM for participation in the above tender.

25.15 The manufacturer shall provide the option of extended warranty for the

camera. The optional extended warranty shall be available in two-year extension blocks for a total warranty period of maximum five years.



Annexure-A

Locations of IR Bullet Cameras

1 Mounted on Security Room, covering the Scooter Parking. 2 Mounted on front side of HMC Building.

3 Mounted on backside of HMC Building. 4 Mounted on backside of CNC Building.

5 Mounted on backside of Hostel-1. 6 Mounted on front side of Hostel 1 7 Mounted on backside of Hostel-2.

8 Mounted on front side of Hostel 2 9 Mounted on backside of Hostel-3.

10 Mounted on front side of Hostel 3 11 Tool Room both corners (2 cameras). 12 Diploma Block (4 cameras).

13 On top of PD’s Residence. 14 Backside of PD’s Residence

15 On top of VES Building. 16 On backside of VES building

17 On top of Generator Shed. 18 On top of old generator shed 19 In Hostel 2 (International) 4 cameras

Total – 26 Cameras

Annexure-B

Locations of Dome Cameras

1 Reception, Administration Building (2 cameras). 2 Tool Room Centre.

3 Training Tool Room. 4 CAD/CAM Building entrance.

5 CAD/CAM Building, Ground Floor. 6 CAD/CAM Building, First Floor. 7 Diploma Block, both floors (4 cameras).

8 Canteen. 9 Hostel-1, both floors (2 cameras).

10 Hostel-2 (International), 2 floors (2 cameras). 11 Hostel-3, 4 floors (4 cameras). 12 HMC Building

13 CNC Building 14 VES Building (2 cameras)

Total – 23 Cameras

Documents

CENTRAL INSTITUTE OF TOOL DESIGNBALANAGAR HYDERABAD CCTV … · CENTRAL INSTITUTE OF TOOL DESIGNBALANAGAR HYDERABAD CCTV SURVEILLANCE SYSTEM TECHNICAL SPECIFICATION FOR CCTV SURVEILLANCE