Upload
others
View
13
Download
0
Embed Size (px)
Citation preview
Certificate of Factory Production Control
0765-CPR-0372 In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the ConstructionProducts Regulation or CPR), this certificate applies to the construction product
Birch plywood EN 636-3 S phenol-formaldehyde (PF) | unfaced/laminated | unfaced (EN 636-1 and EN 636-2) for use as structural components in dry and humid
conditions; laminated and edge sealed (EN 636-3) for external use as structural components | birch plywood
placed on the market by A/S Latvijas Finieris
Bauskas iela 591004 Riga
Latvia and produced in the factory
A/S Latvijas Finieris mill "Lignums"Finiera iela 6
1016 RigaLatvia
This certificate attests that all provisions concerning the assessment and verification of constancy of performance described in AnnexZA of the standard
EN 13986:2004+A1:2015
under system 2+ are applied and that the factory production control fulfills all the prescribed requirements set out above. This certificate was first issued on 13 February 2014 and will remain valid as long as the test methods and factory production controlrequirements included in the harmonized standard, used to assess the performance of the declared characteristics, do not change,and the product, and the manufacturing conditions in the plant are not modified significantly.
Vorstand der Fraunhofer-GesellschaftProf. Dr.-Ing. habil. Prof. E.h. Dr.-Ing. E.h. mult. Dr. h.c.Reimund Neugebauer, PräsidentProf. (Univ. Stellenbosch) Dr. rer. pol. Alfred GossnerProf. Dr. rer. publ. ass. iur. Alexander KurzProf. Dr. rer. nat. Georg Rosenfeld
Fraunhofer-Gesellschaft zur Förderungder angewandten Forschung e. V., München
WKI ist eine eingetragene Markeder Fraunhofer Gesellschaft
Fraunhofer-Institute for Wood ResearchWilhelm-Klauditz-Institut WKI
Bienroder Weg 54 E, 38108 Braunschweig, Germany
Braunschweig, 2 February 2017 Dipl.-Ing. Harald SchwabHead of the Testing, Supervision
and Certifying Body
Certificate of Factory Production Control
0765-CPR-0499 In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the ConstructionProducts Regulation or CPR), this certificate applies to the construction product
Birch plywood EN 636-3 S phenolic-formaldehyde (PF) | unfaced/laminated | unfaced (EN 636-1 and EN 636-2) for use as structural components in dry and humid
conditions; laminated and edge sealed (EN 636-3) for external use as structural components | birch plywood
placed on the market by A/S Latvijas Finieris
Bauskas iela 591004 Riga
Latvia and produced in the factory
A/S Latvijas Finieris mill "Verems"
Lejas Ancupani 4604 Veremu parish
Latvia This certificate attests that all provisions concerning the assessment and verification of constancy of performance described in AnnexZA of the standard
EN 13986:2004+A1:2015
under system 2+ are applied and that the factory production control fulfills all the prescribed requirements set out above. This certificate was first issued on 13 February 2014 and will remain valid as long as the test methods and factory production controlrequirements included in the harmonized standard, used to assess the performance of the declared characteristics, do not change,and the product, and the manufacturing conditions in the plant are not modified significantly.
Vorstand der Fraunhofer-GesellschaftProf. Dr.-Ing. habil. Prof. E.h. Dr.-Ing. E.h. mult. Dr. h.c.Reimund Neugebauer, PräsidentProf. (Univ. Stellenbosch) Dr. rer. pol. Alfred GossnerProf. Dr. rer. publ. ass. iur. Alexander KurzProf. Dr. rer. nat. Georg Rosenfeld
Fraunhofer-Gesellschaft zur Förderungder angewandten Forschung e. V., München
WKI ist eine eingetragene Markeder Fraunhofer Gesellschaft
Fraunhofer-Institute for Wood ResearchWilhelm-Klauditz-Institut WKI
Bienroder Weg 54 E, 38108 Braunschweig, Germany
Braunschweig, 2 February 2017 Dipl.-Ing. Harald SchwabHead of the Testing, Supervision
and Certifying Body
Certificate of Factory Production Control
0765-CPR-0373 In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the ConstructionProducts Regulation or CPR), this certificate applies to the construction product
Birch plywood EN 636-3 S phenolic-formaldehyde (PF) | unfaced/laminated | unfaced (EN 636-1 and EN 636-2) for use as structural components in dry and humid
conditions; laminated and edge sealed (EN 636-3) for external use as structural components | birch plywood
placed on the market by A/S Latvijas Finieris
Bauskas iela 591004 Riga
Latvia and produced in the factory
A/S Latvijas Finieris mill "Furniers"Bauskas iela 59
1004 RigaLatvia
This certificate attests that all provisions concerning the assessment and verification of constancy of performance described in AnnexZA of the standard
EN 13986:2004+A1:2015
under system 2+ are applied and that the factory production control fulfills all the prescribed requirements set out above. This certificate was first issued on 13 February 2014 and will remain valid as long as the test methods and factory production controlrequirements included in the harmonized standard, used to assess the performance of the declared characteristics, do not change,and the product, and the manufacturing conditions in the plant are not modified significantly.
Vorstand der Fraunhofer-GesellschaftProf. Dr.-Ing. habil. Prof. E.h. Dr.-Ing. E.h. mult. Dr. h.c.Reimund Neugebauer, PräsidentProf. (Univ. Stellenbosch) Dr. rer. pol. Alfred GossnerProf. Dr. rer. publ. ass. iur. Alexander KurzProf. Dr. rer. nat. Georg Rosenfeld
Fraunhofer-Gesellschaft zur Förderungder angewandten Forschung e. V., München
WKI ist eine eingetragene Markeder Fraunhofer Gesellschaft
Fraunhofer-Institute for Wood ResearchWilhelm-Klauditz-Institut WKI
Bienroder Weg 54 E, 38108 Braunschweig, Germany
Braunschweig, 2 February 2017 Dipl.-Ing. Harald SchwabHead of the Testing, Supervision
and Certifying Body