CETECOM - Module Integration Presentation

7/30/2019 CETECOM - Module Integration Presentation

1/16

CETECOM Inc.

CETECOM Inc.

Modular Integration Presentation(PTCRB Testing & Certification)

Milpitas, CA San Diego, CA


2/16

CETECOM Inc.

Who is CETECOM?

World leading test & certification lab Mobile & Wireless communications

State-of-the-art facilities strategically located.

Network: 11 locations in 8 countries world-wide

CETECOM USA leading GSM/UMTS lab in US


3/16

CETECOM Inc.

Who is CETECOM?

State-of-the-art facilities in 11 locations world-wide.


4/16

CETECOM Inc.

A Comprehensive Service Portfolio

Mobile Communications

2G, 2.5G, & 3G

Bluetooth

FCC, IC, CE Mark

International Type Approvals

Antenna Testing

OTA (Over-the-Air)

Wi-Fi and GSM/UMTS

Wi-Fi CERTIFIEDTesting

SAR (Specific Absorption Rate)

HAC (Hearing Aid Compatibility)


5/16

CETECOM Inc.

PTCRB Certification Process

CTIA handles the certification process for PTCRB:

1) Schedule testing

Notify the lab of your desired test schedule as soon as possible. Give the lab at least 2-3 weeks lead time if possible.

2) Submit Certification Request

Submit a formal certification request through the PTCRB website (www.ptcrb.com) Select CETECOM in Milpitas, CA (listed as CETECOM Inc.)

CTIA will invoice $3,125, which needs to be paid prior to final approval


6/16

CETECOM Inc.

PTCRB Certification Process

3) Testing is Performed Applicable PTCRB Testing is performed and must be completed before the approval stage

4) Report Upload

CETECOM Inc. will upload all report documentation to the PTCRB database.

5) PTCRB approval Once fees are paid to CTIA and the test reports are reviewed the device is approved for

PTCRB**.

**Please note that all FCC or IC approvals/certification must be completed prior to PTCRB certification.


7/16

CETECOM Inc.

PTCRB Certification Requirements

PTCRB Certification is required for all products entering the North Americanmarkets through a GSM Carrier.

Integration of a PTCRB certified module into a device requires: Reduced set of GSM conformance testing

RSE (Radiated Spurious Emission)

FCC Certification

OTA (Over-the-Air)


8/16

CETECOM Inc.

PTCRB Testing Requirements

NAPRD.03 Section 13.2.3.x:

IMEI SV Number Check Protocol test to confirm that the software version on the module used in device is

the same as the certified version.

SIM Electrical (Section 13.2.3.3) Required for all off-board SIM holders.

Emergency Call Testing (Section 13.2.3.1) Emergency call testing may be required for devices with an audio interface.

MMI (Man Machine Interface) Testing (Section 13.2.3.5) All applicable test cases where the integrator provides an MMI:

SS (Supplementary Services), SATK (SIM Application Toolkit), SMS (Short MessageService, MMS (Multimedia Message Service), IMPS (Instant Message and PresenceService), VT (Video Telephony), PoC (Push to Talk Over Cellular, Java


9/16

CETECOM Inc.

PTCRB Testing Requirements

RSE (Radiated Spurious Emissions) (Section 13.2.3.4) RSE testing according to GSM specification (51.010-1) is to be performed on all

devices integrating a certified module

testing is performed on ALL supported GSM bands: GSM 850/900/1800/1900


10/16

CETECOM Inc.

FCC/EU Testing

The following FCC testing may be required for your device:

FCC Part 22 (850 Mhz Band) FCC Part 24 (1900 Mhz Band)

FCC Part 15.247 (For Integrated Bluetooth modules and/or WLAN modules)

FCC Approval and Listing (Through TCB/FCC)

IC Approval and Listing (Through TCB)

The following EU testing may be required for your device:

EN 301 511 EN 301 489-7 for GSM Europe

EN 301 489-24 for UMTS Europe EN 301 908-1 for RSE UMTS in Europe EN 301 489-17 and EN 300 328 for Europe (For Integrated Bluetooth modules and/or WLAN modules)

NBEO (Notified Body Review for CE)

**The product is exempt from FCC Certification if the module manufacture allows use of the modules FCC ID.


11/16

CETECOM Inc.

OTA (Over-the-Air)

TRP (Total Radiated Power) Measurement of the devices transmitter performance 3D Pattern shows maximum & minimum points of transmitterperformance

TIS (Total Isotropic Sensitivity)Measurement of the devices receiver performance3D Pattern shows maximum & minimum points of receiverperformanceIntermediate channels have to be tested and to pass the limits

OTA Testing is Tested per Band (850/1900)GSM, GPRS/EGPRS, W-CDMA

Vodafone OTA Testing


12/16

CETECOM Inc.

SAR (Specific Absorption Rate)

SAR Testing is required for all devices that has an

antenna that operates within 20cm of the humanbody (ie. Handsets, Tablet PCs, etc)

SAR Standards: FCC OET Bulletin 65 Supplement C IEEE 1528

EN 50361

IEC 62209-1 IEC 62209-2

Australian ARPANSAVodafoneVFTST_1.901_SAR_Data_cards_V1.0


13/16

CETECOM Inc.

Other Services: Bluetooth Qualification

Bluetooth Qualification Test Facility (BQTF)

Full Bluetooth SIG Qualification RF conformance testing Protocol conformance testing Profile interoperability testing

BQB review & listing

BQE (Bluetooth Qualification Expert) consulting services fortesting & qualification


14/16

CETECOM Inc.

Other Services: Wi-Fi CertifiedTesting

March 2006: appointed a Wi-Fi AllianceAuthorized Test Lab Milpitas, CA

Wi-Fi CERTIFIED testing for 802.11 a/b/g products WPA

WPA2

Extended EAP

WMM

WMM Powersave

802.11 h & d

802.11 n

Wi-Fi Protected Setup


15/16

CETECOM Inc.

Why CETECOM?

One-stop shopping less devices to manage with respect to testing (and possibly updating) for the

customer.

All testing (EMC, OTA, SAR, GSM, WiFi, Bluetooth) is handled under one roof.

Quality of Service Direct access to the engineers/managers involved in your project.

Experience several levels of expertise on hand.

Convenience Knowing youre in good hands and things will get done right the first time around.


16/16

CETECOM Inc.

Thank You!

We look forward to working with you!

Please Visit:www.cetecomusa.com

Contact for Sales: Michael Lavia ([email protected])Contact for PTCRB: Adolfo Bayo ([email protected])

Contact for Regulatory: Lothar Schmidt ([email protected])

Documents

CETECOM - Module Integration Presentation