WELDERS TO THE NATION SINCE 1951

(Formerly Known as Advani-Oerlikon Ltd.)www.adorwelding.com

PLASMACUT 25

APPLICATIONS• Recommended for air plasma cutting applications of all electrically conducting sheet metal up to 25 mm thick in the industries

like sheet metal fabrication, Bus and coach body building workshops, Railway and transport workshops, power stations, chemical & fertiliser plants, construction & maintenance workshops, food processing and pharmaceutical equipments using SS, scrap cutting & demolition, ship breaking etc

• Most recommended for applications where good cutting finish with minimum distortion and HAZ, burrfree, drossfree clean cuts with narrow curf are required

• Ideally suitable for metal cutting applications where Oxy Acytelene cutting process is not feasible or Oxy/Acetylene gases are not available, good clean cuts with higher cutting productivity are desired

SALIENT FEATURES• Air plasma cutting outfit with Rugged, Robust design and well established diode based power source

• User friendly controls on the front panel, requires minimum training to the operator• Provided with special "Safety -Interlock" for operator protection• Light weight and flexible torch with 8 mtr long hose assembly• Provided with Air pressure safety switch for "fail safe' cutting• Provided with double air filter cum pressure regulator unit to ensure clean compressed air for excellent cut quality

BRIEF SPECIFICATIONS:

MODELS

Supply voltage

PhaseInput KVA @ 100% Duty cycleOpen circuit voltageCutting current rangeCutting current @ 60% Duty cycle Type of cooling

Class of insulationDimensionsWeight (approx.)Cutting Torch

UNIT PLASMACUT 25

Volt 415No 3

KVA 28Volt 300Amp 100Amp 100Type Forced AirClass Bmm 800x370x825Kg 165

Model CCT 25(A)

CHAMPT400 The New world class Indigenous Inverter based DC welder

Suitable for CELLULOSIC

Electrodes and long Welding cables

• Three phase inverter based, high efficiency and high power factor DC Welder

• Suitable for Long distance welding and cellulosic electrodes

• Enhanced Reliability due to SMD technology • Capable of Welding with all types of cellulosic

electrodes including 6010, 7010G and 8010G

• High frequency IGBT based Rectifier • Arc force adjustment on panel. • TIG Welding possible with Lift Arc / External HF Unit. • Light weight, compact and portable for easy

handling. • Capable of Welding with 100 meter + 100 meter

welding and return cables.

∗ Warranty: One year from the date of purchase. ADOR WELDING LIMITED warrants that all new equipment sold from Plant/Area Offices / Authorized Distributors are free from defects in materials and workmanship and will perform in full accordance with applicable specifications.

∗ In view of continuous development, ADOR WELDING LIMITED reserves the right to modify/change the design and /or the specifications without any prior notice. ∗ Backup by dedicated customer care package.

TECHNICAL SPECIFICATIONS

Registered & Corporate Office: Ador House, 6, K. Dubash Marg, Fort, Mumbai 400 001. INDIA.

Tel: +91 22 6623 9300 / 2284 2525. Fax: +91 22 2287 3083 / 2596 6562 / 2596 6062. Email: cmo@adorians.com

CHAMPT400

TECHNICAL SPECIFICATIONS UNIT CHAMPT400

INPUT Input Supply: Volts. 415 , +15%, -10% Phase No. 3 Frequency Hz 50/60 Input KVA @ 415V Supply @ 100% duty cycle KVA 14 @ No Load KVA 0.24 Power Factor Up to 0.93 Efficiency % ≥ 85

OUTPUT Open Circuit Voltage Volts 85V DC Welding Current Range Amps 10-400 Welding Current (40°C 10 minute cycle) @ 60% duty cycle Amps 400 @ 100% duty cycle Amps 310 GENERAL Suitable for Welding Electrode Size mm Ø 2.5, 3.2, 4, 5 and 6.3 mm Arc force setting Adjustable by Potentiometer Current Display (Set current and Actual current) A 3 digit –7 segment digital panel meter Ingress Protection Class IP23 Cooling Type Forced Air Insulation Class H Welding Output Terminals Stud type for Lug type cable connections Dimensions Length mm 610 Width mm 295 Height (with Handle) mm 520 Height (without Handle) mm 480 Weight (approx.) Kg 37

ORDERING INFORMATION Standard Power Source - MMA outfit CHAMPT400 F10.34.501.0047 Welding Cable Assembly (Optional) S17.01.002.0059 Remote control unit (Optional) 10 mtr. S17.01.002.0049 Earthing Cable Assembly (Optional) S17.01.002.0050

SALIENT FEATURES: • IGBT based latest PWM inverter technology.

• High efficiency. • High OCV and suitable for Cellulosic electrodes.

• Smooth and stable arc with minimum spatter. • Controls provided for adjustments of Arc force.

• TIG operation possible with external HF TIG Control unit

PROTECTIONS WITH AUTO RESET:

! Input Supply Voltage protections for over and under voltage

! Over Temperature

! Protection against single phasing

l

llllllllll

Versatile applications, including cross-country & inplant pipe and tube welding. Ideal for site fabrication, repair and maintenance.

Highly reliable, even in most hostile site conditions. Savings in fuel and longer runs before next refuelling. Specially proven with Cellulosic and other special types of electrodes. Wide range of auxiliary power sources available.

Controlled noise levels. Attractive warranties. Excellent pre & post sales service.

Auxiliary generator protected by MCB

Brushless design for welding power generator --negligible maintenance.

Remote control unit with 10 mtr. cable provided.

Fuel gauge, Hour Meter, Engine protection for low lube oil pressure and high cylinder temperature provided as standard scope of supply.

Powered Performance

www.adorwelding.comWELDERS TO THE NATION SINCE 1951

(Formerly Known as Advani-Oerlikon Ltd.)