Upload
ethelbert-riley
View
217
Download
0
Embed Size (px)
Citation preview
Chemistry Calculations
• Convert 1000ml to L
• Convert 5943g to kg.
• Convert 5.68L to mL
1 L
5.943 kg
5, 680 mL
• Convert 2.5841 kg to g.
• How many significant digits does 5.3937 have?
• How many significant digits does 5.0037 have?
2, 584.1 g
5
5
• How many significant digits does 0.3937 have?
How many significant digits does 0.3037 have?
How many significant digits does 0.3030 have?
4
4
4
• How many significant digits does 50.3700 have?
• How many significant digits does 0.0037 have?
How many significant digits does 050.30630 have?
6
2
7
• Write the number 58,000 in scientific notation.
• Write the number 0.00058 in scientific notation.
• Write the number 58,000.0 in scientific notation.
5.8 x 10^4
5.8 x 10 ^-4
5.80000 x 10^4
• Write 5.0 x 10 ^ 6 in a standard number.
Write 4.8 x 10 ^ -4 in a standard number.
Write 4.683 x 10 ^ 2 in a standard number.
5, 000, 000
0.00048
468.3
• Report to the correct number of significant digits. 3.50mL + 0.15 L + 45.6mL
• Report to the correct number of significant digits. 5.4g -1.3 g
4.0mL
• Report to the correct number of significant digits. 3.4cm x 3.61 cm x 2 cm
199.1 mL
1.0 g/mL
20 cm³
• Report to the correct number of significant digits.• 3.5048 – 3.294678 x 4.03 =
• Report to the correct number of significant digits.
367g + 3.4056 kg =
• Report to the correct number of significant digits.• 44C x 34.5g
2.3 g
-9.77
3770. g
7.0 x 10²
• If your beaker + oil + kernels before the lab was 107.9 and the beaker + oil + kernels after the popping was 106.7, what is the mass of the water in the kernels?
• If the mass of the kernels from above was 2.7 before the lab what is the mass after the lab?
• What is the % of water in the popcorn using the data above?
1.2 g
1.5 g
44%
• The following measurements were taken 4.5 g, 4.6g, 4.6g. Actual = 5.5 g. Are these values precise, accurate, neither, or both?
• If the lines on a graduated cylinder increase by one, what place value can you measure to?
• If a graduated cylinder increases by 0.2 what place value can you measure to?
Precise, not accurate
tenths
hundredths
• If the measurement from a ruler was 3.50cm, what were the increments on the ruler?
• If the mass from a triple beam balance was recorded as 150 g is this correct?
• What is the correct formula for percentage error?
0.1 cm (or 1 mm)
No, the measurement must go to the hundredths, or two decimal places.
E-A x 100
A