cHina beiging OFFice guangzHOu OFFice Heavy Duty CNC … Series.pdf · 2014-09-18 · Basic Structure Bed & Guide Way ... Quill Dia. Quill Travel Travel Thrust MT#6 (Built-In)

Heavy Duty CNC Turning Center

L600/700 Series

2012-03-4000 Ver. 2 ENG

LISH

Head Office & Factory391-8 Gaumjung-Dong, Seongsan-Gu, Changwon, Gyeongnam, KoreaTEL : +82 55 280 9114, FAX : +82 55 282 9680 http : //www.hyundai-wia.com, E-mail : [email protected]

Seoul Office9th Floor Landmark Tower 837-36, Yeoksam Dong, Gangnam-Gu, Seoul, KoreaTEL : +82 2 2112 8452~63, FAX : +82 2 2112 8400

Hyundai-Wia MacHine aMerica cOrp. 450 Commerce Blvd. Carlstadt, New Jersey, U.S.A., 07072TEL : +1 201 636 5600 FAX : +1 201 636 5678http ://www.hyundai-kiamachine.com

cHicagO OFFice751 Landmeier Rd. Elk Grove Village, IL 60007 U.S.A.TEL : +1 847 640 8870(#201) FAX : +1 847 640 8701 http ://www.hyundai-kiamachine.com

L.a OFFice11155 Knott Ave, Suit F, Cypress, CA 90630 U.S.A TEL : +1 714 373 5480 FAX : +1 714 373 5485 http ://www.hyundai-kiamachine.com

argentina OFFiceAV, Alicia Moreau de Justo 1848 of 4-6 Puerto Madero(C1107AFL). Buenos Aires, Argentina TEL : +54 11 4313 1917 FAX : +54 11 4313 1929 http ://www.hyundai-kiamachine.com

Hyundai-Kia eurOpe gMbH Kaiserleipromenade 5, D-63067 Offenbach,Germany TEL : +49 69 271 472700 FAX : +49 69 271 472719 http ://www.hyundai-kia.de

raunHeiM Service centerKelsterbacher Str. 38-46 D-65479 Raunheim, Germany TEL : +49 6142 834 0 FAX : +49 6142 834 100 http ://www.hyundai-kia.de

cHina beiging OFFiceRoom 908 No. 38 Xiaoyun Road, Chaoyang District, Beijing China 100027 TEL : +86 10 8453 9850~2 FAX : +86 10 8453 9853

SangHai OFFiceRoom 501 Ocular B/D, No.1366 Wu Zhong Road, 201103 Shanghai, Chian TEL : +86 21 3431 0370~2 FAX : +86 21 3431 0376

guangzHOu OFFiceRoom 906, International Finance Place, No.8 Huaxia Road, Pearl River New Town, Tianhe District, Guangzhou, China, 510623 TEL : +86 20 8550 6595~6 FAX : +86 20 8550 6597

cHengdu OFFiceRoom 2103, Block A, Times Plaza, Zongfu Road, Chengdu, China 610016 TEL : +86 28 8665 5550 FAX : +86 28 8665 2985

WuHan OFFice Room 43-05, New World International Trade Building(Wuhan) No.568 Jianshe Avenue, Jianghan District, Hankou, Wuhan, Hubei 430022 TEL : +86 - 27 - 5952- 3256~7 FAX : +86 - 27 - 5952 - 3258

QingdaO OFFiceRoom 1207, Zhaoyin Building, 36 Hongkong Middle Road, Qungdao, shandong 266071, China TEL : +86 - 532 - 8667-9333~5 FAX : +86 - 532 - 8667-9338

SHenyang OFFiceRoom 1304, Fortune Center No. 53 Bezhan Road Shenhs, D StrictShenyang, China 110013 TEL : +86 - 24 - 3228 - 6640 FAX : +86 - 24 - 3228 - 6642

india cHennai OFFiceNo.6, Papparambakkam Village, Thiruvallur Taluk & District - 602025 Tamilnadu, India TEL : +91- 44 - 3717 - 6333 FAX : +91 - 44 - 3717 - 6363

※ Specifications are subject to change for improvement without notice.

Heavy Duty CNC Turning Center

L600/700 Series

High Accuracy, High Rigidity, Large Capacity, Heavy-Duty CNC Turning Center

Turret

Easy to Operate

● BMT Turret● Mill Tool Holders● Machining

● FANUC 32i-A● Software

Basic Structure● Bed & Guide Way● Spindle● Tail Stock

Large Capacity, Easy to OperateHeavy-Duty CNC Turning Center

• Powerful Cutting Capacity with 3 step Gear Box

45kW [60Hp] (Max. Torque 6,928Nm [5,114 lbf.ft])

• High Speed Indexing Turret driven by Servo Motor

• C-axis Function (M Series)

• Programmable Tail Stock as Standard (Built-in Type)

• Standard Manual Guide Function with Fanuc 32i-A

L600/700 Series

HYUNDAI WIA MACHINE TOOL 2 3

BASIC STRUCTURE

The L600/700 features a 45° slant bed design which was developed using finite element analysis (FEA) to absorb vibration and minimize thermal growth, ensures a stable platform for powerful, precise cutting capabilities.

FEM Structure Interpretation

Heavy-Duty, Large Work Capacity, CNC Turning Center

Box guideways provide unsurpassed long-term rigidity and accuracy, even under the heaviest of cutting operations

All axis are driven by large diameter, high precision double-nut ball screws.

The double pretension design provides outstanding positioning and repeatability with virtually no thermal growth.

All ball screws are connected directly to the servo drive motors without gears or belts, to eliminate backlash.

Box Guide Way for All Axes

Pre-tensioned & Double Anchored Ball screw

Each axis is directly connected to a highly reliable digital servo motor to provide high rigidity and minimal thermal distortion.

Servo Drives

L700LMA

Ball-screw Deviation (Diameter)

Deviation (μm)

Number of Positioning Repeated (Time)

The 3-step gearbox offers powerful low end torque for heavy cuts as well as high speed rotation for improved surface finish

3-step Spindle Gear Box

• Thermally symmetrical headstock has special heat insulation board, which insulates heat from base to maintain high accuracy during long hour’s continuous operation

• To accomplish advanced stability even during heavy duty cutting, a combination of P4 level double cylindrical roller bearings and angular bearings are configured in multiple rows.

• Advanced double locking device, separating spindle bearing and pulley, to prevent releasing of spindle bearing pretension from interrupted cutting, heavy duty cutting, chuck cylinder operation, and belt pulley tension

Built-in Tail Stock

Geared Head Spindle

The built-in tail stock ensures high accuracy even during heavy, powerful cutting and can be controlled automatically or manually.

Spindle

Tail Stock

Taper

Quill Dia.

Quill Travel

Travel

Thrust

MT#6 (Built-In)

Ø160mm (Ø6.3″)

132.5mm (52″)

1,580[3,180]mm (62.2″[125.2″])

3,360kgf (7,407 lbf)

ITEM L600/700 Series

The C Axis is capable of 0.001° control with 100r/min positioning speed. Contour machining with the C axis is also possible, enabling the operator to machine outer shapes and pockets using rotating tools.

C axis Control

Chuck Size

Spindle Bore

Spindle Speed (rpm)

Output (Max./Cont.)

Torque (Max./Cont.)

Spindle Type

Spindle Nose

C-axis Indexing

inch

mm(in)

r/min

kW(HP)

N.m

-

-

deg

Opt. [21″/18″]

Ø152 (6″)

1,800

45/37 (60/50)

5,610 / 901.6

BELT + 3STEP GEAR

A2-15

360° (0.001° )

Opt. [24″]

Ø181 (7″)

1,500

45/37 (60/50)

6,928 / 1,117

BELT + 3STEP GEAR

A1-15

360° (0.001° )

ITEM L600LMA L700LMA

L600 Series L700 Series

[ ] : L Type


TURRET

Number of Tool

Tool Size

Indexing Time

OD

ID

Output (Max./Cont.)

Speed (rpm)

Torque (Max./Cont.)

Collet size

Type

12EA

□32mm (1.3″)

ø80mm (3.1″)

0.4sec/step

11/7.5kW (15/10HP)

3,000r/min

140/95.4N.m

Ø34(ER50)mm

BMT85

Latest generation BMT top plate increases tool performance and rigidity by securing each tool with 4 screws. Overall cutting power and capability has been improved for all applications, including; milling, drilling and tapping

For long parts, such as shafts, the optional hydraulic steady-rest(s) increases rigidity and minimizes vibration. Long bed (L) configurations of the L600/700 offer two steady rests for added support of oversized workpieces.

The large 12-station BMT turret enables the L600/700 Series lathes to perform high accuracy milling operations in a single set-up.

The BMT turret is driven by a high torque servo motor with a 0.4 second indexing time in either direction

Milling Turret ("M" TYPE)

Exchange of BMT Tools

Hydraulic Steady Rest

Turret

Mill Turret

Mill Turret Torque & Output

Chuck Work

460

460

990

990

Center Work

1,090

1,970

1,970

3,590

Center Work

300

300

600

600

Center Work

520

850

920

1,530

Max. Work (kgf)ITEM

L600A/MA

L600LA/LMA

L700A/MA

L700LA/LMA

Std. Work (kgf)

Load Capacity

Machining

Auto Q-Setter

Machining Ability

Turning 〈Material〈JIS〉:S45C(Carbon steel〉

Spindle rpm

Cutting speed

Cutting depth

Forwarding

Chip discharge

Tool diameter

Cutting speed

Cutting depth

Forwarding

Chip discharge

96 r/min

150 m/min

12 mm

0.65 mm/rev

1,170 cc/min

Ø180 mm

130 m/min

50 mm

0.14 mm/rev

814 cc/min

U-Drilling 〈Material〈JIS〉:S45C(Carbon steel〉

Machining Variation

Heavy-duty cutting (O.D) U-Drilling

L600/700 Series has the widest processing span within the same class, which increases available products. (Steady rest contact dia. : Max.13")

Cutting tools are calibrated quickly and accurately with the addition of a q-setter.

Each tool tip is touched off manually using a sensor that inputs the position automatically

Wide Processing Range

L700MA


The above result might be different by types of processing circumstance

O.D Cutting

Face Milling

Drilling

End Milling

I.D Cutting

O.D Hole Drilling

I.D Threading

Ball-End Milling

Milling Tool HolderLive milling tools may utilize an ER collet adapter, allowing both faces to be fixed. This provides increased accuracy and repeatability.

Angular Milling HeadStraight Milling Head

U-Drill

Collet&Cap

Endmill

Endmil

Drill

Tap

Drill

Tap

Face Cutter

Easy to Operate

Programming system for creating CNC programs easily.

HYUNDAI WIA's smart system is customized to provide user friendly functions which aid in the setup and operation of the machine.

M-Code List Opt. Calcultor Opt. Product Guide Opt.

HW-PGi F Programming Guide i for Fanuc System

HW-TL : Torque LimiterBy sensing the contact load amount on the machine, the torque limiter retracts immediately upon tool impact, to minimize damage to the machine

HW-TM : Tool Monitoring System Opt.

HW-TM

Torque Limiter Diagram

Realistic 3D solid animationPrograming is simulated

Example of easy programmingReadily programing with interactive type, without code

Engraving CycleEngraving Programs are instantly created

by entering the required text.

❖ When you order these options, Please contact sales man

• Real-time cut monitoring• 2 Channel screen display • Self learning for machining amount • 3 stage of status monitoring

(wear/break/no-load)


Easy to Operate

Programming system for creating CNC programs easily.

HYUNDAI WIA's smart system is customized to provide user friendly functions which aid in the setup and operation of the machine.

M-Code List Opt. Calcultor Opt. Product Guide Opt.

HW-PGi F Programming Guide i for Fanuc System

HW-TL : Torque LimiterBy sensing the contact load amount on the machine, the torque limiter retracts immediately upon tool impact, to minimize damage to the machine

HW-TM : Tool Monitoring System Opt.

HW-TM

Torque Limiter Diagram

Realistic 3D solid animationPrograming is simulated

Example of easy programmingReadily programing with interactive type, without code

Engraving CycleEngraving Programs are instantly created

by entering the required text.

❖ When you order these options, Please contact sales man

• Real-time cut monitoring• 2 Channel screen display • Self learning for machining amount • 3 stage of status monitoring

(wear/break/no-load)

unit : mm(in)

Specifications

External Dimensions

L600A/600MA/700A/700MA

L600LA/600LMA/700LA/700LMA

unit : mm(in)

unit : mm(in)

Tooling System

Interference

L600MA/LMA L700MA/LMA

FACE HOLDER

FACE HOLDER

OD HOLDER

ID HOLDER

ID HOLDER

STRAIGHT MILLHOLDER

ANGULAR MILLHOLDER

EXTENDOD HOLDER

OD HOLDER

EXTENDOD HOLDER

L600A/LA L700A/LA

L600MA/LMAL700MA/LMA

L600A/LAL700A/LA


unit : mm(in)

Specifications

Tooling Travel Range L600A/MA L700A/MA

unit : mm(in)

Tooling Travel Range L600LA/LMA L700LA/LMA


Specifications

L600A L600MA L600LA L600LMAø1,050 (41.3″)

ø820 (32.3″)

ø920 (36.2″)

1,650 (65″) 3,250 (128″)

ø117

Opt. [ø530/ø450 (20.9″/17.7″)]

ø152 (6″)

1,800

45/37 (60/50)

5,610 / 901.6

BELT + 3STEP GEAR

A2-15

- 360° (0.001°) - 360° (0.001°)

500/1,680 (19.7″/66.1″) 500/3,280 (19.7″/129.1″)

12/16 12/12

BOX GUIDE

12

□32×32 (1″×1″)

ø80 (3.1″)

0.4

- 11/7.5 (15/10) - 11/7.5 (15/10)

- 3,000 - 3,000

- 140/95.4 - 140/95.4

- Ø34 (ER50) - Ø34 (ER50)

- BMT85 - BMT85

MT6 (Built-in)

ø160 (6.3″)

132 (5.2″)

1,580 (62.2″) 3,180 (125.2″)

570 (150.6) 770 (203.4)

4.0 (1.06)

70

Over 50

220/60 (200/50)

6,220×3,025 (244.9″×119.1″) 7,820x3,025 (307.9″×119.1″)

2,700 (106.3″)

18,000 (3,968.3) 23,500 (51,808.6)

FANUC 32i-A

CAPACITY

Swing Over the Bed

Swing Over the Carriage

Max. Turning Dia.

Max. Turning Length

Bar Capacity

Chuck Size

Spindle Boreb

Spindl Speed (rpm)

Motor (Max/Cont.)

Torque (Max/Con.)

Spindle Type

Spindle Nose

C-axis Indexing

Travel (X/Z/B)

Rapid Travel (X/Z/B)

Slide Type

No. of Tool

Tool Size OD

ID

Indexing Time

Motor (Max/Cont.)

Milling Tool Speed (rpm)

Touque (Max/Cont.)

Collet Size

Type

Taper

Quill Dia.

Quill Travel

Travel

Coolant Tank

Lubricating Tank

Electric Power Supply

Thickness of Power Cable

Voltage

Floor Space (L×W)

Height

Weight

Controller

FEED

LIvE TOOL

TAILSTOCk

TANkCAPACITy

SPIndle

TuRRET

MACHINE

NC

POWERSuPPLy

❖ Specifications are subject to change for improvement without notice.

mm(in)

mm(in)

mm(in)

mm(in)

mm(in)

mm(in)

mm(in)

r/min

kW(HP)

N.m

deg

mm(in)

m/min

EA

mm(in)

mm(in)

sec/step

kW(HP)

r/min

N.m

mm(in)

-

-

mm(in)

mm(in)

mm(in)

ℓ(gel)

ℓ(gel)

kVA

Sq

V/Hz

mm(in)

mm(in)

kg(lb)

-

ITEM

Specifications

[ ] : Option

CAPACITY

Swing Over the Bed

Swing Over the Carriage

Max. Turning Dia.

Max. Turning Length

Bar Capacity

Chuck Size

Spindle Boreb

Spindl Speed (rpm)

Motor (Max/Cont.)

Torque (Max/Con.)

Spindle Type

Spindle Nose

C-axis Indexing

Travel (X/Z/B)

Rapid Travel (X/Z/B)

Slide Type

No. of Tool

Tool Size OD

ID

Indexing Time

Motor (Max/Cont.)

Milling Tool Speed (rpm)

Touque (Max/Cont.)

Collet Size

Type

Taper

Quill Dia.

Quill Travel

Travel

Coolant Tank

Lubricating Tank

Electric Power Supply

Thickness of Power Cable

Voltage

Floor Space (L×W)

Height

Weight

Controller

FEED

LIvE TOOL

TAILSTOCk

TANkCAPACITy

SPIndle

TuRRET

MACHINE

NC

POWERSuPPLy

❖ Specifications are subject to change for improvement without notice.

mm(in)

mm(in)

mm(in)

mm(in)

mm(in)

mm(in)

mm(in)

r/min

kW(HP)

N.m

deg

mm(in)

m/min

EA

mm(in)

mm(in)

sec/step

kW(HP)

r/min

N.m

mm(in)

-

-

mm(in)

mm(in)

mm(in)

ℓ(gel)

ℓ(gel)

kVA

Sq

V/Hz

mm(in)

mm(in)

kg(lb)

-

ITEM L700A L700MA L700LA L700LMA ø1,050 (41.3″)

ø820 (32.3″)

ø920 (36.2″)

1,650 (65″) 3,250 (128″)

ø165 (6.5″)

Opt. [ø610 (24″)]

ø181 (7.1″)

1,500

45/37 (60/50)

6,928 / 1,117

BELT+3STEP GEAR

A1-15

- 360° (0.001°) - 360° (0.001°)

500/1,680 (19.7″/66.1″) 500/3,280 (19.7″/129.1″)

12/16 12/12

BOX GUIDE

12

□32×32 (1″×1″)

ø80 (3.1″)

0.4

- 11/7.5 (15/10) - 11/7.5 (15/10)

- 3,000 - 3,000

- 140/95.4 - 140/95.4

- Ø34 (ER50) - Ø34 (ER50)

- BMT85 - BMT85

MT6 (Built-in)

ø160 (6.3″)

132 (5.2″)

1,580 (62.2″) 3,180 (125.2″)

570 (150.6) 770 (203.4)

4.0 (1.06)

70

Over 50

220/60 (200/50)

6,220×3,025 (244.9″×119.1″) 7,820x3,025 (307.9″×119.1″)

2,700 (106.3″)

18,000 (3,968.3) 23,500 (51,808.6)

FANUC 32i-A

Specifications

[ ] : Option


Standard & Optional

● : Standard ○ : Option ☆ : Prior Consultation X : Non Application - : Impossible

Door Inter-Lock

Total Splash Guard

Chuck Pressure Failure Detector

Back Spin Torque Limiter (BST)

Torque Limiter

Electric Device

Call Light

Call Light

Call Light & Buzzer

Electric Cabinet Light

Remote MPG

Spindle Load Meter

Spindle RPM Meter

Work Counter

Total Counter

Tool Counter

Multi Tool Counter

Electric Circuit Breaker

AVR(Auto Voltage Regulator)

Transformer & Cable

Auto Power Off

Measurement

Q-Setter

Automatic Q-Setter

Work Close Confirmation Device

(Only for Special Chuck)

Work Setter

Linear Scale

Coolant Level Sensor (Only for Chip Conveyor)

Environment

Air Conditioner

Dehumidifier

Oil Mist Collector

Oil Skimmer

MQL (Minimal Quantity Lubrication)

Fixture & Automation

Auto Door

Auto Shutter (Only for Automatic System)

Sub Operation Pannel

Bar Feeder Interface

Bar Feeder (FEDEK)

Extra M-Code 4ea

Automation Interface

I/O Extension (IN & OUT)

Parts Catcher

Turret Work Pusher (For Automation)

Hyd. Device

Standard Hyd. Cylinder

Standard Hyd. Unit

Software

Machine Guidance

HWTM (Tool Monitoring System)

DNC Software

Dialogue Program

ETC

Tool Box

Customized Color

CAD & CAM

❖ The specifications as above will only serve as a reference.

L600A(LA) L600MA(LMA)

● ●

● ●

○ ○

● ●

☆ ☆

● ●

○ ○

○ ○

○ ○

☆ ☆

○ ○

○ ○

☆ ☆

☆ ☆

☆ ☆

☆ ☆

☆ ☆

○ ○

☆ ☆

○ ○

○ ○

– –

● ●

○ ○

○ ○

☆ ☆

○ ○

○ ○

☆ ☆

○ ○

○ ○

○ ○

○ ○

☆ ☆

○ ○

☆ ☆

X X

☆ ☆

– –

– –

○ ○

☆ ☆

○ ○

○ ○

X X

☆ ☆

● ●

● ●

☆ ☆

☆ ☆

○ ○

● ●

☆ ☆

☆ ☆

☆ ☆

Safety Device

Main Spindle Hollow Chuck 3 Jaw

Main Spindle Solid Chuck 3 Jaw

Standard Soft Jaw (1set)

Chuck Clamp Foot Switch

2 Steps Hyd, Pressure Device

Spindle Inside Stopper

5° Index

Cs-Axis (0.001°)

Chuck Open/Close Confirmation Device

2 Steps Chuck Foot Switch

Turret

Tool Holder

Mill Turret

Straight Milling Head (Radial)

Angular Milling Head (Axial)



Boring Sleeve

Drill Socket

U-Drill Cap

Long Boring Bar I.D Holder

Swivel Head

Tail Stock & Steady Rest

Built-In Tail Stock

Programable Tail Stock

Manual Type Steady Rest

Manual Type Hyd. Steady Rest

Programable Hyd. Steady Rest

Dead Center

2 Steps Tail Stock Pressure System

Quill Forward/Reverse Confirmation Device

Tail Stock Foot Switch

Coolant & Air Blow

Standard Coolant (Nozzle)

Bed Flushing Coolant

Chuck Coolant (Upper Chuck)

Gun Coolant

Spindle Thru Coolant (Only for Special Chuck)

Thru Coolant for Live Tool

Chuck Air Blow (Upper Chuck)

Tail Stock Air Blow (Upper Tail Stock)

Turret Air Blow

Air Gun

Spindle Thru Air Blow (Only for Special Chuck)

High Pressure Coolant

Power Coolant System (For Automation)

Coolant Chiller

Chip Disposal

Coolant Tank

Chip Conveyor (Hinge/Scraper)

Special Chip Conveyor (Drum Filter)

Chip Box

18〞

21〞

24〞

18〞

21〞

24〞

Radial

Collet Type,1ea

Collet Type,1ea

Adapter Type

Adapter Type

1Set

2Sets

1Set

2Sets

6Bar

20Bar

570ℓ

770ℓ

Front (Right)

Rear (Rear)

Standard(180ℓ)

Swing(200ℓ)

Large Size(330ℓ)

Costomized

1 Color : ■

3 Color : ■■■

3 Color : ■■■B

LED Type

LED Type

Digital

Digital

Digital

6ea

9ea

70kVA

TACO

SMC

X Axis

Z Axis

Standard

High Speed

16Contact

32Contact

Main SP.

Hollow

58bar/63ℓ

Need Munsel No.


○ ○

○ ○

– –

○ ○

○ ○

– –

● ●

● ●

○ ○

☆ ☆

☆ ☆

X ●

○ ○

○ ○

● ●

– ●

– ●

– ●

– ○

– ○

● ●

○ ○

● ●

LA ☆ LMA ☆

– ☆

● ●

● ●

☆ ☆

X X

LA ☆ LMA ☆

○ ○

LA ○ LMA ○

● ●

☆ ☆

● ●

● ●

● ●

● ●

○ ○

○ ○

☆ ☆

– X

○ ○

☆ ☆

☆ ☆

○ ○

☆ ☆

○ ○

○ ○

☆ ☆

☆ ☆

● ●

LA ● LMA ●

○ ○

X X

☆ ☆

○ ○

○ ○

○ ○

☆ ☆

Spindle & Chuck

● : Standard ○ : Option ☆ : Prior Consultation X : Non Application - : Impossible


Door Inter-Lock

Total Splash Guard

Chuck Pressure Failure Detector

Back Spin Torque Limiter (BST)

Torque Limiter

Electric Device

Call Light

Call Light

Call Light & Buzzer

Electric Cabinet Light

Remote MPG

Spindle Load Meter

Spindle RPM Meter

Work Counter

Total Counter

Tool Counter

Multi Tool Counter

Electric Circuit Breaker

AVR(Auto Voltage Regulator)

Transformer & Cable

Auto Power Off

Measurement

Q-Setter

Automatic Q-Setter

Work Close Confirmation Device

(Only for Special Chuck)

Work Setter

Linear Scale

Coolant Level Sensor (Only for Chip Conveyor)

Environment

Air Conditioner

Dehumidifier

Oil Mist Collector

Oil Skimmer

MQL (Minimal Quantity Lubrication)

Fixture & Automation

Auto Door

Auto Shutter (Only for Automatic System)

Sub Operation Pannel

Bar Feeder Interface

Bar Feeder (FEDEK)

Extra M-Code 4ea

Automation Interface

I/O Extension (IN & OUT)

Parts Catcher

Turret Work Pusher (For Automation)

Hyd. Device

Standard Hyd. Cylinder

Standard Hyd. Unit

Software

Machine Guidance

HWTM (Tool Monitoring System)

DNC Software

Dialogue Program

ETC

Tool Box

Customized Color

CAD & CAM

❖ The specifications as above will only serve as a reference.


● ●

● ●

○ ○

● ●

☆ ☆

● ●

○ ○

○ ○

○ ○

☆ ☆

○ ○

○ ○

☆ ☆

☆ ☆

☆ ☆

☆ ☆

☆ ☆

○ ○

☆ ☆

○ ○

○ ○

– –

● ●

○ ○

○ ○

☆ ☆

○ ○

○ ○

☆ ☆

○ ○

○ ○

○ ○

○ ○

☆ ☆

○ ○

☆ ☆

X X

☆ ☆

– –

– –

○ ○

☆ ☆

○ ○

○ ○

X X

☆ ☆

● ●

● ●

☆ ☆

☆ ☆

○ ○

● ●

☆ ☆

☆ ☆

☆ ☆

Safety Device

Main Spindle Hollow Chuck 3 Jaw

Main Spindle Solid Chuck 3 Jaw

Standard Soft Jaw (1set)

Chuck Clamp Foot Switch

2 Steps Hyd, Pressure Device

Spindle Inside Stopper

5° Index

Cs-Axis (0.001°)

Chuck Open/Close Confirmation Device

2 Steps Chuck Foot Switch

Turret

Tool Holder

Mill Turret





Boring Sleeve

Drill Socket

U-Drill Cap

Long Boring Bar I.D Holder

Swivel Head

Tail Stock & Steady Rest

Built-In Tail Stock

Programable Tail Stock

Manual Type Steady Rest

Manual Type Hyd. Steady Rest

Programable Hyd. Steady Rest

Dead Center

2 Steps Tail Stock Pressure System

Quill Forward/Reverse Confirmation Device

Tail Stock Foot Switch

Coolant & Air Blow

Standard Coolant (Nozzle)

Bed Flushing Coolant

Chuck Coolant (Upper Chuck)

Gun Coolant

Spindle Thru Coolant (Only for Special Chuck)

Thru Coolant for Live Tool

Chuck Air Blow (Upper Chuck)

Tail Stock Air Blow (Upper Tail Stock)

Turret Air Blow

Air Gun

Spindle Thru Air Blow (Only for Special Chuck)

High Pressure Coolant

Power Coolant System (For Automation)

Coolant Chiller

Chip Disposal

Coolant Tank

Chip Conveyor (Hinge/Scraper)

Special Chip Conveyor (Drum Filter)

Chip Box

18〞

21〞

24〞

18〞

21〞

24〞

Radial

Collet Type,1ea

Collet Type,1ea

Adapter Type

Adapter Type

1Set

2Sets

1Set

2Sets

6Bar

20Bar

570ℓ

770ℓ

Front (Right)

Rear (Rear)

Standard(180ℓ)

Swing(200ℓ)

Large Size(330ℓ)

Costomized

1 Color : ■

3 Color : ■■■

3 Color : ■■■B

LED Type

LED Type

Digital

Digital

Digital

6ea

9ea

70kVA

TACO

SMC

X Axis

Z Axis

Standard

High Speed

16Contact

32Contact

Main SP.

Hollow

58bar/63ℓ

Need Munsel No.


– –

– –

○ ○

– –

– –

○ ○

● ●

● ●

○ ○

☆ ☆

☆ ☆

X ●

○ ○

○ ○

● ●

– ●

– ●

– ●

– ○

– ○

● ●

○ ○

● ●

LA ☆ LMA ☆

– ☆

● ●

● ●

☆ ☆

X X

LA ☆ LMA ☆

○ ○

LA ○ LMA ○

● ●

☆ ☆

● ●

● ●

● ●

● ●

○ ○

○ ○

☆ ☆

– X

○ ○

☆ ☆

☆ ☆

○ ○

☆ ☆

○ ○

○ ○

☆ ☆

☆ ☆

● ●

LA ● LMA ●

○ ○

X X

☆ ☆

○ ○

○ ○

○ ○

☆ ☆

Spindle & Chuck

Controller

FANUC 32i-A

Controlled axes

Simultaneous controllable axes

Least input increment

Least command increment

High speed HRV control

Inch / Metric conversion

Interlock

Machine lock

Emergency stop

Stored stroke check 1

Stored stroke check 2, 3

Mirror image

Follow-up

Servo-off

Backlash compensation

Position switch

Unexpected disturbance

torque detection

High resolution moving control (HRM)

LCD / MDI

Automatic operation (memory)

MDI operation

Search function

Program restart

Wrong operation prevention

Buffer register

Program check function

Single block

Manual jog feed

Manual handle feedrate

Feed command

Feedrate override

Jog override

Rapid traverse override

Override cancel

Feed per minute, feed per rotation

Nano interpolation

Dwell

Axis control / Display unit

Operation

Feed functions

Program input & interpolation functions

Program input & interpolation functions Data in/output & editing functions

Thread retract

Variable lead threading

1st reference point return

Reference point return check

2nd reference point return

Program stop / End

Tape code

Optional block skip

Maximum programmable

dimensions

Program number

Absolute and incremental

programming

Decimal point input

Plane selection

Work coordinate system selection

Manual absolute

Direct drawing dimension

programming

G code system

Programmable data input

Sub program call

Custom macro B

Addition of custom macro

common variable

Multiple repetitive cycles

Multiple repetitive cycles Ⅱ

Canned cycles for turning

Manual guide i

Miscellaneous function

Miscellaneous function lock

Spindle speed command

Constant surface speed control

Spindle speed override

Spindle orientation

Rigid tapping

Tool function

Tool offset pairs

Tool offset

Tool nose radius compensation

Geometry / Wear compensation

Direct input of measured tool

compensation value B

Tool life management

Reader / Puncher interface

Memory card input/output

Embedded ethernet

Part program storage length

Number of registrable programs

expansion

Memory lock

Background editing

Extended part program edition

Self-diagnosis function

History display

Help function

External message

Run hour / Parts count display

Display of actual spindle speed

and T code

Actual cutting feedrate display

Operating monitor screen

Graphic display

Spindle / Servo setting screen

Selection of 5 optional language

Erase CRT screen display

Automatic data backup

Cs contouring control

Stored pitch error compensation

Polar coordinate interpolation

Cylindrical interpolation

Canned cycles for drilling

spindle orientation expansion

Spindle synchronous control

Torque control

Y axis offset

Angular axis control

Fast ethernet

Optional block skip

3rd and 4th reference point return

G code system

Part program storage length

Polygon turning

Helical interpolation

Dynamic graphic display

Protection of data at 8 levels

Tool Monitoring function

Options

Auxiliary / Spindle speed functions

Tool function / Tool compensation

Data in/output & editing functions

Max. 4 axes are available

X, Z axes

X, Z, C axes (M type machine)

X, Z, Y, C axes (Y type machine)

X, Z, B, C axes (MS type machine)

2axes / Linear and circular (Max. 4axes)

X, Z, Y, B axes : 0.001 mm (0.0001”)

C axis : 0.001 deg

X, Z, Y, B axes : 0.001 mm (0.0001”)

C axis : 0.001 deg

G20 / G21

Each axis / All axes

All axes

Over-travel

+/- 0~9999 pulses

(Rapid traverse & cutting feed)

Back-spin torque limiter (BST)

10.4” Color LCD

Sequence, program

Dry run., program check

Rapid, jog, handle

x1, x10, x100

F code feedrate direct command

0~200 % (10% units)

0~2,000 mm/min[79 ipm]

F1, F5, F25/F50, F100%

Positioning / Linear / Circular

(G00 / G01 / G02, G03)

G04, 0~9999.9999 sec

100 Mbps

256 Kbyte

Max. 500 programs

Copy, move, change of NC program

Alarm & operation display

Load meter, etc

Screen saver

Turn mill

Turn mill

Turn mill

Turn mill

Turn mill

Turn mill, Sub spindle

Sub spindle

Sub spindle

Y type machine

Y type machine

(Except SK150/T210/250SY)

100 Mbps (Option board is required)

9 ea

B / C

512 Kbyte

HWTM (Built-in Fanuc type)

G28, manual

G27

G30

M00, M01 / M02, M30

EIA / ISO

1 ea

+/- 9999.9999”

O4 digits

G17, G18, G19

G52 to G59

“ON” fixed

Included chamfering / Corner R`

A

G10

10 folds nested

#100 to #199, #500 to #999

Conversational programming

M4 digits

S4 digits, binary output

50% to 150% (10% units)

T2 + 2

64 pairs

G40, G41, G42

RS232C

Functions according to machine specification

•Figures in inch are converted from metric values.

•Design and specifications subject to change without notice.

Display, diagnosis & setting functions


ENERGY SAVING & ECO FRIENDLY

HYUNDAI WIA leads the way in Energy saving and Eco Friendly Machine Tools.

All machines are designed and built with power saving methods and

environmental consideration in mind.

MQL : Minimal Quantity Lubrication Energy Saving

Economy Lubrication SystemOil Skimmer

Mist Collector

Minimum quantity lubrication or near-dry machining has revolutionized how machining operations are cutting costs, improving tool life and being environmentally responsible.

The goal of this system is to spray only the amount of lubricant required to prevent heat and chip build up at the cutting tool or work piece face.

By applying lubricant only when the machines axis are moving lubrication consumption is reduced by 30% compared to standard systems.

Power Consumption Monitor

Real time power consumption can be monitored through the OP screen

ECO System

Coolant

(Wet Cutting)

MQL Cutting

(Semi-Dry)

Lubricating Minimal

Mist Oil

Compressed Air

Cooling

Chip Disposal

An oil skimmer can increase coolant and tool life by removing tramp oil contaminants.

Fine particles (1~10㎛) generated during machining can contaminate the working area and surrounding environment.

The mist collector catches and removes these particles to reduce the level of hazards in the air and reduce the accumulation of surface contaminates in your facility.

❖ This Catalogue made by recycle paper

Example of Machining Center Application

Opt.

Opt.

Opt.

Documents

cHina beiging OFFice guangzHOu OFFice Heavy Duty CNC … Series.pdf · 2014-09-18 · Basic Structure Bed & Guide Way ... Quill Dia. Quill Travel Travel Thrust MT#6 (Built-In)