Clad - ESI · sustainable forests to ensure that a full Chain of Custody certification can be achieved. As one of the founder members of the Forests Forever initiative and supporters

Cladsimply stunning cladding solutions

Clad21st century cladding solutions

02 External Cladding

ArborClad is wholly committed to supplying the highestquality, sustainable cladding products. Working withindustry leading manufacturers alongside their ownspecialist manufacturing facilities.

At the heart of the ArborClad external cladding rangeis the environment. Chosen specifically for theirenvironmental qualities, Chain of Custody iscommonplace across the entire range.

A specialist range comprisingthe highest quality, sustainablecladding products, Arborclad isperfect for any application, fromdomestic and commercial torefurbishment.

04 Range overview

06 Traditional cladding range

10 Thermally treated cladding range

17 Pre-finished cladding range

18 Endless possibilities

22 Your project how you need it

24 Case studies

28 Installation guidelines

PEFC/16-37-361

PEFC Certified

Promoting SustainableForest Management

www.pefc.org

External Cladding 03


Clad21ST CENTURY CLADDING SOLUTIONS

THERMAL CLADDING RANGE | PAGE 10

/ Softwood and hardwood options

/ Improved stability, durability and performance

/ Increased weather resistance

/ Chemical-free treatment applied through the full board section, virtually eliminatingrot and insect attack

/ Environmentally focused

/ Uniformity of product colour in its natural state

/ More even weathering over time than traditional timber claddings

/ Can be fire treated and/or finished with a stain or paint if required.

/ Bespoke profiles and trim available.

TRADITIONAL CLADDING RANGE | PAGE 06

/ Cost-effective range of durable, resilient traditional claddings

/ Environmentally focused

/ Suitable for a range of applications

/ Treated Redwood, Larch and WesternRed Cedar species

/ Bespoke profiles and other species also available

/ Can be fire treated and/or finished with a stain or paint if required.

/ Bespoke profiles and trim available.

The completecladding solution


An ideal solutionTimber cladding is being specified today more and more by local authorities, architects and developersfor its environmental credentials and for its ease ofworking, natural beauty, performance andcompetitive price.

Timber is one building material that has an unrivalledpedigree for use in construction, which is why timber is an ideal choice for use as an external cladding.

Working with some of Europe’s leadingmanufacturers ArborClad has selected a range ofproducts at the forefront of design and technology to meet today’s challenging cladding requirements.

Standard profilesTraditional cladding styles and patterns are always going to be in Vogue. For this reason our standard stock range is based on the popular shiplap andoffset cladding profiles. It is also why the moretraditional Redwood, Larch and Western Red Cedarspecies are included.

These are timber species with a proven performance and appearance and, alongside the other products in the range, ensure the perfect solution for any installation is available.

Domestic, commercial and refurbishmentIdeal for commercial, domestic and refurbishmentprojects, ArborClad cladding range offers a perfectstarting point from where you can select thematerials most suited to each individual project. The longer a building product lasts the better it is for the environment, especially a critical externalenvelope component such as cladding.

Bespoke profiles*We deal with timber on a daily basis, so we know its limitations. We also know that you occasionally want to be different and stand out from the crowd!

At ArborClad we employ skilled woodworkingmachinists who are able to produce a full range of bespoke profiles to suit even the most demandingof specifications. These bespoke items can beproduced, in addition to the timbers featured in thestandard cladding range, from a wide variety ofother timber species - Green Oak, Sweet Chestnut,Douglas Fir, Cumaru to name a few.

For further details, or to discuss your exactrequirements please get in touch and our dedicated team will do their utmost to assist.

Committed to the environmentArborClad has achieved Chain of Custody* certification covering all of theCompany’s divisions, providing compliance with government specificationsfor timber from legal and well-managed sources as well as meeting therequirements of the construction industry's independent third party auditorganisations.

PEFC/16-37-361

PEFC Certified


www.pefc.org

*Please note that minimum order quantities may apply.


A range of traditional cladding productssuitable for various applications

The traditional cladding range is a selection of the most popular timberspecies currently used today in the UK market for exterior cladding.Selected to meet a wide range of budgets the timbers are machined by experts into a wide selection of standard sizes and profiles.

We are also able to provide a fully comprehensive selection of timber species in profiles specific to your exact requirements.

Whatever your project requirements, you can be sure of ArborClad’srenowned reliability and customer service.

Cost-effective range of durable, resilient traditional claddings

Environmentally focused

Suitable for a range of applications

Treated Redwood, Larch & Western Red Cedar species

Bespoke profiles and other speciesalso available

Can be fire treated and/or finishedwith a stain or paint if required.


OFF

SET

SHIP

LAP

TGV1

TGV2

OTHER SPECIES AVAILABLE

SAMPLES TECHNICAL ASSISTANCE

ADVICE ON FIRE RESISTANCE

Sizes shown are finished unless otherwise stated. Subject to stock availability at the time of order. Timber cladding, whenleft in its natural state, will oxidise and turn a silver grey colour over time, due to the effects of exposure to sunlight.

traditionalredwood cladding

European Redwood shiplap and offsetcladding with square end detail. Foruse where economy is the priority.

Profiles available: Offset / Shiplap / Tongue & Groove

Sizes available (finished sizes shown): 15mm x 119mm in random lengths19mm x 117mm in random lengths19mm x 140mm in random lengths

Areas of use:Refurbishment / Domestic / Commercial*

Durability:Slightly durable. Moderately durable if a finish is applied.

Use class: 3

Material density:470-510kg/m3

Finish options available:To prevent the natural weathering of materials a paint, stain or oil finish featuring UV filter is recommended

Bespoke options:The range can be machined to any requiredprofile, including splayed and TG&V. A widerange of additional sections are also available at competitive rates and short lead times


Contact your nearest ArborClad dealer for:

OFF

SET

SHIP

LAP


traditional larch cladding

Larch shiplap and offset cladding withsquare end detail. A highly durableand resilient solution.

Profiles available: Offset / Shiplap

Sizes available (finished sizes shown): 19mm x 140mm in random lengths


Durability:Moderately durable

Use class: 3



Bespoke options:The range can be machined to any required profile, including splayed and TG&V. A wide range of additional sections are also available at competitive rates and short lead times






OFF

SET

SHIP

LAP


traditional cedar cladding

Western Red Cedar shiplap andoffset cladding with square enddetail. A highly durable andresilient solution.




Durability:Durable

Use class: 3



Bespoke options:The range can be machined to any required profile, including splayed and TG&V. A wide range of additional sections are also available at competitive rates and short lead times


PEFC/16-37-361

PEFC Certified


www.pefc.org





With improved stability and durabilityqualities, thermally treated claddingprovides added long term benefitsand flexibility.Through the treatment applied, the timber is less prone to absorb or losemoisture, helping to restrict the potential for swelling, shrinkage or distortion.

During the thermal treatment process, the wood also acquires a beautifulbrown colour and its velvet-like surface is pleasant to the touch. At its best, thewood possesses nuances of antique and fine wood shades that bring warmthto any project, be this for an internal or external application.

Softwood and hardwood options

Improved stability, durability and performance

Increased weather resistance

Chemical-free treatment appliedthrough the full board section,virtually eliminating rot and insectattack


Uniformity of product colour in its natural state

More even weathering over time than traditional timber claddings

Can be fire treated and/or finishedwith a stain or paint if required.


The thermal treatment processHeat treatment (within a range of 160ºC to 215ºC)has the effect of modifying the properties of wood. Thethermal treatment process consists of heating wood totemperatures exceeding its spontaneous combustiontemperature with the water vapour present having aprotective function. A natural process, the varyingtemperatures, varying treatment duration and varyingdrying techniques require no chemical additives andimpart new properties to the treated wood.

Through the treatment applied, the timber is lessprone to absorb or lose moisture, helping to restrictthe potential for swelling, shrinkage or distortion.

During the thermal treatment process, the wood alsoacquires a beautiful brown colour and its velvet-likesurface is pleasant to the touch. At its best, the woodpossesses nuances of antique and fine wood shadesthat bring warmth to any project, be this for aninternal or external application.

Leading suppliersArborClad has chosen to work with the world’s leadingsuppliers of thermally treated timbers. ArborCladThermo-D Redwood undergoes the traditional heattreatment cycle which the Finnish ThermowoodAssociation has developed, approved and promotedsince their formation in 1985.

A Thermo-S cycle of heat treatment is available, but this is only for products which are to be used in internalapplications, such as flooring. The Thermo-S treatmentis a shorter process and provides a lighter colour. Due to the limitations of use the process is likely to be gradually phased out.

Additionally, we are happy to offer to our customersArborClad Thermo-D Platowood Spruce andHardwood. Platowood, of Holland, are one of theworld’s innovators in heat treatment of wood and have a unique pedigree of supply into today’s claddingmarket. The Platowood heat treatment process is alonger treatment which, in the case of the spruce,actually enhances the timber durability.

Focusing on the environmentThe ArborClad cladding range has been selectedusing timbers sourced only from well managed andsustainable forests to ensure that a full Chain ofCustody certification can be achieved. As one of thefounder members of the Forests Forever initiative and supporters of wood for good, we feel it is ourresponsibility to provide environmental solutions forthe timber cladding market today.

For further details, or to discuss your exactrequirements please get in touch and our dedicated team will do their utmost to assist.


OFF

SET

SHIP

LAP


Thermo-Dredwood cladding

Thermally treated European Redwoodcladding for long term internal andexternal use.


Sizes available (finished sizes shown): 19mm x 117mm in random lengths19mm x 140mm in random lengths


Durability:Durable

Use class: 3

Material density:450kg/m3

Finish options available:Can be painted, stained and fire treated to Euroclass B

Bespoke options:Supplied as Class D treatment cycle for externaluse. Also available as Class S suitable for internaluse only

PEFC/16-37-361

PEFC Certified


www.pefc.org






13

OFF

SET

SHIP

LAP


Thermo-Dspruce cladding

European Spruce selected grade forcladdings, suitable for structuralapplications.


Sizes available (finished sizes shown): 19mm x 117mm in random lengths19mm x 140mm in random lengths

Areas of use:Refurbishment / Domestic / Commercial

Durability:Very durable

Use class: 3



Bespoke options:Available in any required profile

Additional features:Suitable for structural applications





OFF

SET

SHIP

LAP

CladTHERMORY-SOUTHERN

YELLOW PINE

Thermory-southern yellowpine cladding

Thermally treated Southern Yellow Pinecladding provides a viable knot-freealternative to traditional cedar.




Use class: 2




Sizes shown are finished unless otherwise stated. Subject to stock availability at the time of order. Timber cladding, whenleft in its natural state, will oxidise and turn a silver grey colour over time, due to the effects of exposure to sunlight.14 External Cladding

NEW FOR2014





PEFC/16-37-361

PEFC Certified


www.pefc.org

*

*Ava

ilabl

e on

req

uest

, m

inim

um q

uant

ities

may

app

ly.

Sizes shown are finished unless otherwise stated. Subject to stock availability at the time of order. Timber cladding, whenleft in its natural state, will oxidise and turn a silver grey colour over time, due to the effects of exposure to sunlight. 15

OFF

SET

C6

SHIP

LAP

Thermory-ashcladding

Perfect for exterior and interior use,thermally treated ash provides alimitless opportunity for design.

Profiles available: Offset / Shiplap / C6

Sizes available (finished sizes shown): offset/shiplap 19mm x 140mm in random lengthsC6: 20mm x 155mm x 2.4 - 3.6m lengthscan be used in conjunction with clip system


Durability:Very durable

Use class: 1




NEW FOR2014





*Ava

ilabl

e on

req

uest

, m

inim

um q

uant

ities

may

app

ly.

*

OFF

SET

SHIP

LAP

FRAKE

Thermo-Dfraké cladding

Perfect for exterior and interiorcladding, Fraké is a premium heatmodified timber species

Profiles available: Shiplap / Offset

Sizes available (finished sizes shown): 19mm x 140mm in random lengths19mm x 190mm in random lengths100/125mm nominal widths also available, ask for details


Durability:Durable

Use class: 3




Imag

e us

ed w

ith p

erm

issi

on o

f Pl

atoW

ood

BVIm

age

used

with

per

mis

sion

of

Plat

oWoo

d BV





Sizes shown are finished unless otherwise stated. Subject to stock availability at the time of order. Timber cladding, whenleft in its natural state, will oxidise and turn a silver grey colour over time, due to the effects of exposure to sunlight.16 External Cladding


Fully finished cladding offers a quickand straightforward solution.Benefitting from a quality controlled factory environment for painting and drying,our fully finished cladding ranges ensure a high quality finish, that would be nearimpossible to replicate with a traditional ‘on-site’ application.

Provided by manufacturers who have built a reputation on innovation, flexibilityand a customer friendly approach to their business partnerships, alongside agenerous range of standard* and to order colours and finishes available, it’ssimple to specify the exact cladding solution for your needs.

Arriving ready to install, protected against stain and mould formation and theharmful effects of UV radiation, fully finished cladding offers a straightforwardand effective solution.

Available in rustic, traditional andmetal effect finishes

No on-site finishing required

Range of paint finishes available

Can save time & money


End matched profiles

Suitable for a range of applications

Increased speed of installation

Manufacturers paint warranty

*Standard colours may vary; please confirm prior to ordering.

endless possibilitiesWith its inherent quality, durability and stability the possible applications forthermally treated wood are extensive. With performance and environmentalbenefits built in it’s the material of choice whatever the application.


Floo

ring

Landscaping

WORKING WITH


Dec

king

THERMO-D RED

Contact us for more guidance and information

Feat

ures

Fenc

ing

Dec

king

Skir

ting

and

arch

itrav

eD

ocks

Brid

ge d

ecki

ngA

sh t

herm

al d

ecki

ng

Redw

ood

ther

mal

dec

king

20

endless possibilitiesDeckingFencing

BalconiesRoofsDocks

HousesSaunas

FeaturesSheet piling

Sound barriersRetaining wallsBridge decking

Landscape structuresSkirting & architraves

Bollards, posts & stakesRainscreen & solar shade

Contact us for more detailsand to discuss your specific

requirements


From concept to completion...Your cladding, how you need it


Clad21ST CENTURY CLADDING SOLUTIONS

Based on years of experience, ArborClad specialises increating traditional and bespoke timber cladding solutionsto exacting specifications. Computer-controlled cuttingmachines allow precision profiling in manufacture,providing a truly bespoke service. Traditional designsthrough to more elaborate requirements are catered for byour team, who provide a timber cladding solution that notonly meets your needs but those of your building.

Timber is a natural product. Its hygroscopic propertiesmean that, through changes in moisture and humidity,timber cladding may move and, regardless of type orspecies, over time turn a silver grey colour through naturaloxidation.

It can, unless naturally durable or pre-treated, be subject tomould or insect attack. For this reason it is important, whenchoosing your cladding, that consideration be given to thelocation, species, treatment and surface finish you require.ArborClad work with leading manufacturers who provide acomprehensive range of timber preservatives, fire andfinishing systems to ensure that your cladding will lookgood for longer.

timber preservatives, priming, staining. Ask for details.

*Dependent on specification, ask for details.

Bespoke profiles are available to meet your particularspecifications, the only limit is your imagination.

fi

CALL US TO DISCUSS YOUR INDIVIDUAL REQUIREMENTS

Fire protection is a crucial consideration for modern buildingsof today along with development and refurbishment ofexisting structures. Where Building Regulations require fireperformance in accordance with British Standards (TypicallyClass 0 or Class 1) or Euroclass B or C, ArborCladrecommends, and can provide, pre-treatment with a qualityassured flame retardant applied by a processor approved bythe product manufacturer. Available for both internal orexternal use and, if required, complete with a wide range ofsupplier finishing applications (paints/stains etc) ArborCladcan provide the complete solution for today’s high demands.

NB - Designers should satisfy themselves that the description of theperformance achieved in fire test ‘classification reports’ corresponds withthe species and size of cladding that they plan to specify.

With one of the most comprehensive ranges of timber cladding available on theUK market today, ArborClad timber cladding can help transform a project from‘everyday’ into a dramatic design statement.

From concept to completion, we work regularly with architects, local builders,renovators, major contractors and national house builders to ensure that theproduct specified is the right product for the right situation and at the right price.


Commercial cladding

The ArborClad timber cladding range is an idealsolution where cost and longevity are key drivers to specification.

Building designers, timber frame manufacturers andspecifiers are choosing timber cladding for its inherentqualities and its suitability for use in panel sections andoff-site modular construction.

Utilising off-site manufacturing techniques and the latestdesign technology, panels are able to be transported tosite ready for erection, saving both time and associatedconstruction costs. The advantage of producing panelsin a controlled environment mean that additional qualitycontrol checks can be made and accuracy and quality ofinstallation enhanced before the product has left thefactory gate.

Timber cladding, in particular when used with timberframe construction, provides a durable and lightweightfinishing option. The result being that the buildingexterior appears warm, fresh and clean in appearancewhilst also benefiting from additional thermal andacoustic performance.

The commercial cladding projects shown on this page, sited in both Wales and Doncaster, utilised over 500m2 of ArborClad Traditional Larch cladding,creating a highly durable and resilient exterior.

ArborClad Traditional Larch


Case studies

Cumbria PartnershipNHS Foundation Trust

The UK’s first specification ofthermally treated PlatowoodFraké timber cladding forms the exterior facade of CumbriaPartnership NHS FoundationTrust’s newly refurbished ten-bedpsychiatric intensive care unit.

The facility, known as RowanwoodWard, is part of the CarletonClinic on Cumwhinton Road inthe city. It has been extensivelydeveloped and finished with 150 m2 of this highly durable andattractive cladding solution.

ArborClad Thermo-DPlatowood Hardwood

CambournePrimary School

Finished in ArborClad Pre-FinishedRustic cladding, the new temporarybuildings that house Cambourne’sThird Primary School make a visuallydramatic yet environmentallysustainable statement to both schoolusers and the community of whichthe school is a part.

In less than six weeks from receipt of order, the cladding was suppliedand delivered to site in a bespokeRAL colour, along with a broadrange of specially manufacturedjoints, corners and finishes to ensurea perfect fit and so that the productretains its weather resistantproperties.

ArborClad Pre-Finished Rustic


University of Sheffield

Some 40,000 running metres of thermally treatedtimber cladding, conditioned for exposed externalapplication, was installed extensively on The Universityof Sheffield’s latest accommodation blocks at the newEndcliffe Student Village in the city.

With a service life of up to 30 years, thermally treatedcladding is ideal for use where an attractive, durableand ecological solution is required. The treatment process ensures enhanced weatherperformance through the removal of moisture contentand naturally occurring resin. The treated cladding isfully stable, meaning that no additional processes orfinishing is required on site.

Thermally treated cladding is one of several claddingsolutions offered by ArborClad. The range has beenselected using timbers sourced only from well managedand sustainable forests to ensure that a full Chain ofCustody certification can be achieved.

ArborClad Thermo-D Redwood



Marks and Spencer’sBradford, West Yorkshire

Marks and Spencer’s new multi-million pound northerndistribution centre in Bradford, West Yorkshire, has beencompleted with a facade of high performance thermallytreated Plato®Wood cladding supplied by Howarth Timber& Building Supplies.

The high-technology centre, close to the motorwaynetwork, is part of Marks & Spencer’s programme toconsolidate its existing logistics network. The new lowcarbon facility has been designed to meets the demands of M&S’s environmental initiative, known as Plan A.

Plato®Wood is a stable, durable and chemical-free timbercladding solution, as functional as it is aestheticallyattractive. It is sourced from certified sustainable forestsand is suitable for both ground and fresh water contact.From its Bradford merchant branch, Howarth supplied over 900m2 plus for installation on this prestigious project.

One of a comprehensive number of cladding solutionsfrom Howarth, Plato®Wood requires minimal maintenance,is 100% recyclable, has a life expectancy in excess of 30 years and is certified by the Forest Stewardship Council.

ArborClad Thermo-D Platowood Spruce

Timber is a natural product and providing it is treated in accordance with the manufacturersrecommendations it will remain looking good and will last a lifetime. The following installation guidelines are additional areas you may wish to consider when selecting and fitting your external cladding. For further information please refer to the manufacturers recommendations.

Installation guidelines

• It’s preferable to use stainless steel nails for all speciesbut especially those with a high tannin content, andthey are essential for timbers installed ‘green’. By usingStainless Steel this avoids permanent staining due to thereaction of the tannin on mild steel or galvanised nails.

• If using battens*, we recommend a minimum size of 38mm x 50mm (finished size).

HardwoodStainless steel screws/annular ring shank nails are the preferredmethod of fixing for hardwood boards. Stainless steel screwsare preferable, and essential for timbers installed ‘green’:

• Slight over-drilling of the screw holes will allow for any movement in the wood and prevent splits.Countersinking screws is also recommended.

• Where ‘green’ wood is used, it may be necessary to fit washers to the screws to maintain the fixingsecurity. This can become a design feature.

• Metal clips, which also provide a ‘secret fix’ effect, mayalso be considered. Screw fixings should be minimum40mm or half the width of the board, whichever is thegreat, from the end of the boards to avoid splitting.

Fixing external cladding

SoftwoodStainless steel annular ring shank/round head nailsare appropriate for fixing softwood cladding:

• The nail length is generally minimum 50mm or 2.5times the thickness of the board being fixed whicheveris the greater and should be punched slightly belowthe wood’s surface.

• Boards over 100mm wide should have double fixings.

• Make sure that butt joints always meet on sufficient batten support width (see below).

Part 1. The basic rules for installing cladding


*Whi

lst

not

a re

quire

men

t w

e w

ould

rec

omm

end

that

all

timbe

r ba

ttens

use

d ar

e tr

eate

d w

ith p

rese

rvat

ive.

Board sizesHorizontal boards:

• Shiplap or feather edge type boards should have a minimum of 10mm overlap, but allow 2mm gapsbetween the upstands for movement in the timber.

• Tongued and grooved boards should have amaximum face width of 150mm, with a 2mmclearance above the tongue for expansion. Most commercially produced profiles will include these tolerances. Install with the tongue upwards.

• Open joint boards should have an 8-15mm gap at the ‘water face’. Chamfered edges allow the boards to overlap slightly, reducing any exposure of the cavity.

Vertical boards:• The face width of vertical boards should not exceed

150mm. The most versatile fixing method is board onboard. Any overlap should be a minimum of 20mm.

Diagonal boards:• Should be fixed on battens, as for vertical boards,

taking into consideration the comments above foroverlaps or tongue and groove styles.

Using battensNOTE: We recommend a minimum batten* size of 38mm x 50mm (finished size).

Use battens that are preservative treated and structurallygraded to ensure they are able to carry the weight of theboard material. Fix horizontal boards to vertical battens,taking care where boards are jointed to ensure they sitsecurely on sufficient batten width. Conversely, fix verticalboards to horizontal battens, with vertical ‘counter’battens to facilitate drainage and ventilation. Supportbattens should be fixed at spacings of no more than600mm, whether vertical or horizontal. And at no morethan 400mm for diagonal boards.

These spacings will maintain the overall stability of the cladding.

Remember the cavityThe timber cladding you are fixing to the building is effectively an outer layer of protection against the elements. However, a cavity should be formed behind the cladding to allow any water or moisture that might penetrate the cladding to escape. This ensures internal and external surfaces of the wood maintain a similar moisture content, reducing the potential for movement and distortion, allowingventilation between the inner and outer surfaces.

The cavity should be at least 19mm wide, but may be wider, depending on the thickness of fixing battens. A weatherproof membrane is usually required to protect the structure, although this may not be needed on masonry. Additionally, if not sealed a fly screemembrane should also be used to prevent insectinfiltration.

Part 2. Types of cladding installation

Part 3. Precautionsfor bottom fixing


*Whi

lst

not

a re

quire

men

t w

e w

ould

rec

omm

end

that

all

timbe

r ba

ttens

use

d ar

e tr

eate

d w

ith p

rese

rvat

ive.

Window and door openingsOpenings within a wall require special attention to avoid the need to notch or split the boards. These openings need to be dimensionally compatiblewith the cladding to provide a good appearance aswell as allowing for fixings. Thought also needs to be given to the 3-dimensional relationship of anyflashings, sills etc. to allow for adequate drainage of water from the cladding surface and board ends.

Corner detailsThis is an important area of fixing detail, not justaesthetically but functionally, to ensure adequateprotection against water.

Mitring boards at corners is not recommended for pre-finished products, as natural movement of thetimber will allow the joint to open, causing failure of the surface coating and water ingress.

Mitring the ends of boards can be considered, but it is advisable to provide a gap between any adjoiningsurfaces and pre-finishing/treating all exposed ends.

Internal and external corners are more easily detailedon vertical boarding. These can be jointed by ‘tonguingand grooving’ to give added stability and protection.

Part 4. Cladding details

Solutions for internal cladding anglesTimber allows for a wide variety of design options for finishing. These can be simple solutions orbespoke profile manufacture. Below are just a few commonly used solutions for forming internal angles.

Solutions for external cladding anglesTimber allows for a wide variety of design options for finishing. These can be simple solutions orbespoke profile manufacture. Below are just a few commonly used solutions for forming external angles.

Part 5. Profile lay and coverage persqm (finished sizes)

15 x 119mm shiplap 109mm 9.1015 x 119mm T&G 112mm 8.90

19 x 117mm shiplap 100mm 10.019 x 117mm offset 95mm 10.519 x 117mm T&G 112mm 8.90

19 x 140mm shiplap 125mm 8.0019 x 140mm offset 120mm 8.3019 x 140mm T&G 135mm 7.40

Cover size lmt /m219 x 147mm secret-fix 122mm 8.19

19 x 190mm shiplap 175mm 5.7019 x 190mm offset 170mm 5.88

23 x 145mm offset 120mm 8.30

Please note: All offset profiles allow for installation by secret-fixing or secret-fix offset. For further information or advice please contact us.

Cover size lmt /m2


Part 6.AccessoriesPart 6.Accessories

EXTERNALCORNER (TIMBER)

INTERNALCORNER (TIMBER)

FLY MESH(SUPPLIED IN ROLLS)

TREATED TIMBERBATTENS

STAINLESS STEEL

SCREWS/NAILS

4 4 4 4 4

4 4 4 4 4

4 4 4 4 4

4 4 4 4 4

4 4 4 4 4

4 4 4 4 4

4 4 4 4 4

4 4 4 4 4

REDWOOD

LARCH

CEDAR

REDWOOD

SPRUCE

SOUTHERN YELLOW PINE

ASH

FRAKE


Minimum batten* size: 38mm x 50mm (finished size).

Accessories are also available for the ArborClad Pre-Finished cladding range. Please ask for details.

Note. These accessories are just a few provided by manufacturers to make installation of your cladding as simpleand straightforward as possible. Accessories may vary in size and availability per cladding range. ArborClad is ableto manufacture bespoke cladding profiles and accessories to your exact requirements. For clarification and furtherdetails please contact us.

*Whi

lst

not

a re

quire

men

t w

e w

ould

rec

omm

end

that

all

timbe

r ba

ttens

use

d ar

e tr

eate

d w

ith p

rese

rvat

ive.

HOWARTH WINDOWS & DOORSNew Holland 01469 530 577 windows&[email protected] DN19 7RT

HOWARTH TIMBER & BUILDING SUPPLIESNORTH WESTAccrington 01254 380 500 [email protected] BB5 0DNAshton 0161 330 1634 [email protected] OL7 0AGBlackburn 01254 699 696 [email protected] BB1 3EEBurnley 01282 426 241 [email protected] BB10 1RZBury 0161 761 6416 [email protected] BL9 6AQDarwen 01254 873 552 [email protected] BB3 2ESManchester 0161 834 8505 [email protected] M4 5HDOldham 0161 620 2128 [email protected] OL1 3LJRochdale 01706 710 962 [email protected] OL16 2AASale 0161 973 9578 [email protected] M33 6LB

YORKS & LINCSBarnsley 01226 289 494 [email protected] S75 2BLBradford 01274 871 411 [email protected] WF15 8ERBrighouse 01484 720 666 [email protected] HD6 1PEDewsbury 01924 462 186 [email protected] WF13 2AFGrimsby 01472 361 621 [email protected] DN32 9BALeeds 0113 2000 100 [email protected] LS9 0RAMalton 01653 697 776 [email protected] YO17 6BTScunthorpe 01724 860 325 [email protected] DN15 6XHThorne 01405 813 515 [email protected] DN8 5DYWakefield 01924 372 291 [email protected] WF1 5DWYork 01904 629 931 [email protected] YO26 4ZH

MIDLANDSCorby 01536 407 079 [email protected] NN18 8ETDerby 01332 360 233 [email protected] DE1 3QTMansfield 01623 624 455 [email protected] NG19 7JGNewcastle 01782 715 900 [email protected] ST5 1AW

LONDON & SOUTH EASTDartford 01322 286 844 [email protected] DA1 1BNLondon 020 8691 6237 [email protected] SE4 2LYTottenham 020 8808 4337 [email protected] N17 6RA

HOWARTH TIMBER ENGINEERED SOLUTIONSAshton 0161 339 4581 [email protected] OL7 0AGBreighton 01757 288 300 [email protected] YO8 6LYBury St. Edmunds 01284 772 700 [email protected] IP32 7QW

HOWARTH GREENHOUSERochdale 01706 356 230 [email protected] OL16 2AA

A specialist range comprising the highest quality,sustainable cladding products. Perfect for any application,

from domestic and commercial to refurbishment.

Available from your nearest branch of Howarth Timber, the UK’s largest privately owned and operated timber group

with branches located nationwide

Due to a policy of continual product development, ArborClad reserves the right to alter anyof the information given in this publication without prior notice.

07/14

Documents

Clad - ESI · sustainable forests to ensure that a full Chain of Custody certification can be achieved. As one of the founder members of the Forests Forever initiative and supporters