Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Clamp for Pin Insulator
There is Major Chances of Phase to Ground Fault due to
• ExistingNonStandardMethodofbindingPreventsonlyParallelMovementofConductorbutnotLateral.
• PronetoPhasetoGroundFaultsduetoslippingofConductor.
ToovercometheIssuewehavedevelopedaClamptouseoverPinInsulatorforBindingofCon-ductor.ThisPreventsbothLateralandParallelMovementofConductor
Available on below ratingsVoltage Type
400 Porcelain11000 Porcelain11000 Polymer33000 Porcelain33000 Polymer
Properties
Manufacturing Process
Application
Fire Retardant
Magnetic
Corrosion Proof
Chemical Erosion Proof
Non-Conductive
Finishes
Fabrication process
Exterior/Interior
Any Industrial Finish isavailable, Standard
is Zinc
Polyester Resin withglass ber
Exterior/Interior
Any Industrial Finishis available,
Standard is Yellow
Extrusion Process
Interior
Any Interior match isavailable, standardis European White
(Wood and Mable nishesalso available)
Mild Steel(Galvanized) FRP PVC
UV Protected
Weight Heavy Medium Light
Load bearing Capacity
Type of Cable Trays
1. Ladder Type: Two Longitude side rails connected by rungs at regular interval.2. Trough Type: Structures with a solid or perforated bottom with. Integrated or separate longitude side rails.
3. Channel Type: Structures with a solid or perforated bottom with integral side rails.
Cable TraysSTAY POWERED UP ALWAYS
When we designed this new cable management and multidiscipline support system we had one thing in mind: To be Simply the Best. This cable support systems are evaluated as per market trends, customer requirements, design and cost factors. Cable trays are safe ,durable and cost effective product for routing & supporting power cables as well as control cables for indoor & outdoor applications. RMC offers wide variety of cable trays in various materials like FRP, G.I./M.S. & PVC cable trays. Various type of cable trays are used in different applications and various industries that is:
Railways, Electrical/Utility, Aerospace & Automotive, Highway & Roads ,Offshore & Oil & Gas, Chemical Processing, Cooling Towers, Construction, Defense.
All the cables trays are certied by the recognized laboratories. Test certicates are available on request.
FITTING & ACCESSORIES
HeadOf�ice:B-11 (B&C) Malviya Industrial Area,2nd B Road, Jaipur – 302017 Rajasthan , INDIA
Phone:+91-141-4400222Fax:+91-141-4031516E-Mail: [email protected] Website: www.rmcindia.in
Works:7 KMS from Chaksu, Kotkhawda Road,Village Badodiya , Tehsil : ChaksuTonk Road, Jaipur – 303901 Rajasthan, INDIA
Dealer/Distributor
COUPLER PLATE
HORIZONTAL ELBOW
VERTICAL ELBOW INSIDE
HORIZONTAL CROSS
HORIZONTAL TEE
VERTICAL ELBOW OUTSIDE
HORIZONTAL REDUCER
(STRAIGHT, RIGHT HAND, LEFT HAND)
To connect two tray sections in same plane
To change direction in same plane.
Changes direction upward from thehorizontal plane.
To join cable tray sections in fourdirections at 90° intervals in same plane.
To join cable tray sections in threedirections at 90° intervals in same plane.
Changes direction downward from thehorizontal plane.
Suitable to join cable tray sections of
different widths.
ALL PICTURES SHOWN ARE FOR ILLUSTRATION PURPOSE ONLY. ACTUAL PRODUCT MAY VARY DUE TO PRODUCT ENHANCEMENT.
STAY POWERED UP ALWAYS
METER BOXES,JUNCTION BOXES &DISTRIBUTION BOXES
METER BOXES,JUNCTION BOXES &DISTRIBUTION BOXES
LTCT/HT/AMR METER BOX
We offer IP Enclosures in various material and sizes to enclose and protect Energy Meters. RMC Enclosures are provided with IP Level from IP-33 to IP-65 and are customized as per the customers requirements like Push Fit Type Locking System, Sensor System, with Louvers etc. All our Enclosures are tamper proof/theft proof and are fire Resistant, UV Resistant and Self Extinguishing, which is an essential requirement with electrical utilities. DT Meter Boxes are available with the option of Modem Mounting Arrangements, TTB,CT’s etc. as per the customers requirements. The Applicable Standards are IS:13947(part-1) for Ingress Protection, IS:13410 for SMC Materials, IS:14772 for Enclosures and other tests as per customers requirements. Various Sizes are listed, however other dimensions may also be made as per the customer's requirements.
METER BOX Single/Three Phase Whole Current Meters &Ct operated Meters
Single/Three Phase Multi Meters
APPLICATION
MULTI METER BOX
METER BOX FOR ENERGY METERS
MATERIAL
SMC
Mild Steel (Deep Drawn & Fabrication)
Polycarbonate
ProductCode
Dimensions in MMH x W x D
Material
Note: Please ask for more available or current DIE list if required
METER BOX
D
W
H
LTCT/HT/AMR METER BOX
LTCT METER BOX HT/AMR METER BOX
MULTI METER BOX
Mb2522MB2525MB2822MB3322MB3429MB3922MB4030MB4537MB5030MB5345MB5728MB6535MB6550MB7450MB7627MB8135MB9035MB9045
MB10035MB8080
MB10070-DMB10070-SMB100100DDMB2820DDMB2822DDMB3025DDMB4030DDMB5030DDMB5743DDMB8135DDMB9646PCMB2418PCMB2525PCMB2619PCMB3025PCMB3527PCMB4025PCMB4633PCMB5542
250X220X135 250X250X160 285X225X135335X225X135340X285X125 390X225X140 400X300X190 450X375X200 500X300X230530X450X180570X280X220 650X350X250 650X500X250700X480X210 765X275X175810X350X230 900X350X250900X450X250
1000X350X230800X800X275
1000X700X2201000X700X250
1000X1000X325285X200X150285X225X135300X250X160400X300X160500X300X160575X430X150810X350X230 960X460X215240X180X115250X250X160 260X190X120300X250X130350X270X200400X250X135460X330X170550X425X130
SMCSMCSMCSMCSMCSMCSMCSMCSMCSMCSMCSMCSMCSMCSMCSMCSMCSMCSMCSMCSMCSMCSMCDDDDDDDDDDDDDDDDPCPCPCPCPCPCPCPC
BOTTOM VIEW
BOTTOM VIEW
Distribution Boxes for A.B. Cables (Nut & Bolt Type)
Distribution Boxes for A.B. Cables (MOC)
Distribution Boxes for A.B. Cables (Spring Loaded)
Distribution Boxes for Various Rating of Distribution transformers
APPLICATION
We offer the largest variety of service connection boxes with variations like single/three phase incoming and polyphase outgoing, All the DB’s are protected with various level of INGRESS protection till IP-65. We provide many varities in the bus bar arrangements to choose from; bare, insulated and spring loaded bus bars or the same may be provided with switchgears like MCB’s or MCCB’s of ratings as required by the customers. The Appl icable Standards are IS:13947(part-1) for ingress protection, Is:13410 for SMC Materials, IS:14772 for Enclosures, IS:8623 for temperature rise and HV Test and other tests as per our customers requirements.
DISTRIBUTION BOXES
MATERIAL
Product Code Dimensions in MMH x W x D
Note: Please ask for more available or currentDIE list if required
Material
Distribution_Box_16_KVAwith Meter Arrangement
Distribution_Box_25_KVAwith 2 O/G Connection
Distribution_Box 100_250_630_KVAwith Switch Disconnector
Db2525DB2522DB2818DB3020DB3322DB3527DB3429DB3550DB3922DB4030DB4537DB2413DB2822DB6535DB7450DB5030
DB10070-DDB10070-SDB100100DDDB2822DDDB4230
DDDB10050DDDB100100DDDB130105
PCDB2525PCDB3527PCDB4030
250X250X160 250X220X135280x180x140300X200X100335X225X135350X270X200340X290X150 345X480X210390X225X140 400X300X190 450X375X200 240x130x110285X225X135650X350X250 700X500X210 500X300X230
1000X700X2201000X700X2501000x1000x325285X225X120418X300X120
1000X500X1701000X1000X3251305X1050X325
250X250X160 350X270X200400X300X190
SMC
Mild Steel (Deep Drawn & Fabrication)
Polycarbonate
BOTTOM VIEW
BOTTOM VIEW
BOTTOM VIEW
SIDE VIEW
SIDE VIEW
SIDE VIEW
FRONT VIEW
FRONT VIEW
FRONT VIEW
DOOR OPEN VIEW
DOOR OPEN VIEW
DOOR OPEN VIEW
HeadOffice:B-11 (B&C) Malviya Industrial Area,2nd B Road, Jaipur – 302017 Rajasthan , INDIA
Phone:+91-141-4400222Fax:+91-141-4031516E-Mail: [email protected] Website: www.rmcindia.in
Works:7 KMS from Chaksu, Kotkhawda Road,Village Badodiya , Tehsil : ChaksuTonk Road, Jaipur – 303901 Rajasthan, INDIA
JUNCTION BOXES
Product Code Dimensions in MM H x W x D
Note: Please ask for more available or current DIE list if required
Pole Mounted Junction Boxes with Distribution Blocks, ControlTerminal Box, Aerial Fuse Box, Wall mounted control Panel
APPLICATION
We offer the largest variety of Junction boxes with variations like single/three phase incoming and polyphase outgoing, All the Junction Boxes are protected with various level of INGRESS protection till IP-65. The Applicable Standards are IS:13947(part-1) for ingress protection, Is:13410 for SMC Materials, IS:14772 for Enclosures,
MATERIAL
SMC, Polycarbonate, Mild Steel (Deep Drawn & Fabrication)
Jb1010JB1816JB1510JB1414JB2014JB1616JB2413JB2525JB2713JB2822JB2818JB2522JB3020JB3322JB3527JB3549JB3429JB3922JB4030JB4537JB5030JB5728JB6535JB7048
JB70100JB10069JB10069
JB100100DDJB2822DDJB4230PCJB2525PCJB3527PCJB4030
103x103x73185x165x60155x100x60140x140x95200X140X95155x155x100240x130x110255X255X160273x136x113285X225X135280x180x60
250X220X130300X200X100335X225X135350X270X200350X490X210340X290X150390x225x140400x300x190450x375x200500x300x230570x280x220650x350x250700x480x210
700X1000X300 1000X690X2201000x690x250
1000x1000x325285X225X120418X300X120250X250X160 350X270X200400X300X190
Dealer/Distributor
BOTTOM VIEW
BOTTOM VIEW
BOTTOM VIEW
FRONT VIEW
FRONT VIEW
FRONT VIEW
DOOR OPEN VIEW
DOOR OPEN VIEW
DOOR OPEN VIEW
SIDE VIEW
SIDE VIEW
SIDE VIEW
Can be fabricated as per custom requirements.
FRP Pultruded gratings are manufactured with a high percentage of glass, providing durability
and an extremely high unidirectional strength and stiffness making it the ideal solution for
application where longer support spans are required. Combine the corrosion resistance, long
service life, low maintenance with the low cost of installation, and Safe-T-Span offers a life cycle
cost that is signicantly lower than that of metal.
Reduced maintenance and
replacement costs
Enhanced workplace safety
Reduced installation costs
Dimensionally stable in
many environments
BenefitsCorrosion Resistant
Slip-Resistant gritted top
surface
Strong yet lightweight
Low coefcient of
expansion and contraction
FeaturesFloor System
Walkways
Work Platforms
Stairs
Ramps
Trench Covers
Catwalks
Applications
FRP Molded gratings are available in a variety of resins, standard and custom colors, depths, panel sizes and mesh congurations. Surface options include a meniscus or integrally applied grit top, both of which offer superior, slip resistant footing. FRP Molded grating is used in place of traditional materials for a FRP solution that ts a wide range of applications and environments.
Corrosion Resistant
Bi-directional Strength
Slip Resistant
Low Maintenance
High Strength to Weight Ratio
Fire Retardant
Lightweight
Impact Resistant
Long Service Life
Superior Ergonomics
Benefits
Standard available size of Moulded Gratings 1220x2440MM with hole size of 38x40x40MM
STAY POWERED UP ALWAYS
FEATURES
RANGE & SPECIFICATION
APPLICATIONS
Ÿ Ideal replacement for Insulating Rubber mats at places like sub-stations,control Rooms and trench covers
Ÿ Anti-corrosive,light weight yet strong,
Ÿ Can withstand the load of Breaker Trolleys Without obstructing their movement
Ÿ High Dielectric Strength and Life Expectancy
Ÿ Easy to Fix on oor, Insulating Protection for life
Ÿ Load bearing Capacity As per IS.
Ÿ Conrms to IS 13410,BS 5734,ASTM D5948,DIN 16913
Ÿ Turnkey contractors.
Ÿ Electrical control rooms.
Ÿ Railways.
Ÿ Govt and commercial complexes.
Ÿ Contractors of Govt departments.
Ÿ Industries.
SMC/FRPCHEQUERED PLATES
Rating of Equipment Recommended Thickness
3.3KV Equipment 2.56.6KV Equipment 2.5
11.0KV Equipment 2.522.0KV Equipment 2.533.0KV Equipment 5.066.0KV Equipment 5.0EHT Switch Yard 10.0
Size (Mts) 1 x 1 (Standard Size) Standard Thicknesses (Mm) 1.5 - 25MMMaterial of Construction Sheet Moulding Compound (SMC)
Custom Thicknesses can be provide on requirement.
Standard Colour Off-white
Custom Against LargeRequirements
Other colours canbe offered
STAY POWERED UP ALWAYS
FEATURES
RANGE & SPECIFICATION
• Excellent dielectric properties such as volume resistivity,
surface resistivity, arc resistance and comparative tracking
index
• Can withstand continuous temperatures up to 400°C
• Anti-corrosive and resistant to most acids, alkalis and
chemicals
• Lightweight, strong, stiff, and clean
• Non-hygroscopic and retains its dielectric properties
even in presence of high humidity
• Weather proof
• Self-coloured and maintenance-free
SMC/FRP SHEETS
Size (Mts) 1 x 1 (Standard Size) Standard Thicknesses (Mm) 1.5 - 25MMMaterial of Construction Sheet Moulding Compound (SMC)
Custom Thicknesses can be provide on requirement.
Standard Colour Off-white
Custom Against LargeRequirements
Other colours canbe offered
HeadOffice:B-11 (B&C) Malviya Industrial Area,2nd B Road, Jaipur – 302017 Rajasthan , INDIA
Phone:+91-141-4400222Fax:+91-141-4031516E-Mail: [email protected] Website: www.rmcindia.in
Works:7 KMS from Chaksu, Kotkhawda Road,Village Badodiya , Tehsil : ChaksuTonk Road, Jaipur – 303901 Rajasthan, INDIA
Dealer/Distributor
Intelligent Power Module
IPM is a smart electric safety supervision and power management system that includes both hardware and software, which integrates the most latest and advanced technologies like AI, Big data, IoT and cloud computing. The Smart IPM gives you protection against short circuit, overload, over voltage, under voltage, unbalance and phase loss.
• Abnormal Humming and Chattering Detection• DATA Access and Control on Android Application• Remote Disconnection Feature• Indication for Earth Leakage• Surge Protection
FEATURES
Additional Integrated Features
Power Management
Smart Metering Smart Control Smart Monitoring Full Protection
Available on below ratingsNo. of poles Rating in Amp. No. of feeders
2 16 Single2 32 Single2 40 Single2 63 Single2 80 Single2 100 Single & Double4 16 Single4 32 Single4 40 Single4 63 Single4 80 Single4 100 Single & Double4 125 Single & Double4 250 Single & Double4 400 Single & Double4 630 Single & Double
The device works with the combination of hardware and software and the data is col-lected and stored , processed and displayed for computing and management and to create an alarm system and prevention system in or-der to prevent tampering and accidents and to ensure a trouble free operations and power distribution. It also analyse and gives you alert of meter tampering, box door open, indication for type of fault and measurement of fault current.
Intelligent Power ModuleTransformer Rating (KVA)
Full load Incoming current in Amp.
No. of feederOutgoing
current in Amp.Box sizein mm.
Protocol
10 43 Single 63 MB4030 MQTT
16 69 Single 80 MB4030 MQTT
25 108Single 125 MB5030 MQTTDouble 63 MB6535
40 172Single 250 MB5030 MQTTDouble 125 MB8080
50 215Single 250 MB5030 MQTTDouble 125 MB8080
63 84Single 100 MB4030 MQTTDouble 50 MB6535
100 133Single 250 MB5030 MQTTDouble 80 MB6535
160 213Single 250 MB5030 MQTTDouble 125 MB8080Three 80 MB8080
200 266Single 400 MB6550 MQTTDouble 125 MB8080Three 100 MB100100
250 333Single 400 MB6550 MQTTDouble 250 MB8080Three 125 MB8080
315 419
Single 630 MB6550 MQTTDouble 250 MB8080
Three 250+125MB8080+ MB5030
400 532
Single 630 MB6550 MQTTDouble 400 MB100100
Three 250MB8080+ MB5030
500 665
Single 630 MB6550 MQTTDouble 400 MB100100
Three 250MB8080+ MB5030
630 838
Double 400 MB100100 MQTT
Three 400MB100100+
MB6550
Four 250MB8080+ MB8080
990 1317
Three 400MB100100+
MB6550MQTT
Four 400MB100100+ MB100100