Clarion D X Z 735 MP

7/30/2019 Clarion D X Z 735 MP

1/11

Service ManualAM/FM CD/MP3/WMA Player

Model

Clarion Co., Ltd.50 Kamitoda, Toda-shi,Saitama 335-8511Japan

ServiceDept.:5-66 Azuma,Kitamoto-shi,Saitama 364-0007Japan

Tel:+81-48-541-2335/ 2432 FAX:+81-48-541-2703

Published by Service Dept.

298-6037-00 FEB.2003 X

Printed in P.R.C.

(PE-2561B-A for U.S.A.)

SPECIFICATIONS

FM tuner section

Frequency range: 87.9MHz to 107.9MHz

(PE-2561B-A)

87.0MHz to 108MHz

(PE-2561K-A/B)

Usable sensitivity: 9dBf

50dB quieting sensitivity: 15dBf

Alternate channel selectivity: 70dB

Ste reo separ ation : 3 5d B( 1kHz)

Frequency response: 30Hz to 15kHz (+3/-3dB)

AM tuner sectionFr eq ue ncy r an ge : 53 0kHz to 1 710 kHz

(PE-2561B-A)

531kHz to 1602kHz

(PE-2561K-A/B)

Usabl e sensitivity: 25 uV

(PE-2561K-A/B for Other Countries)

Bass control action: +16dB, -12dB (50Hz/80Hz/120Hz)

Treble control action: +12/-12dB (8kHz/12kHz)

Line output level: 1. 8V ( CD 1 kH z)

General

Power supply voltage: 14.4V DC(10.8 to 15.6V allowable),

negative ground

Current consumption: Less than 15A, 3A

Speaker impedance: 4ohm(4ohm to 8ohm allowable)

Weight: Source unit 1.3kg

Remote control unit

30g(including battery)

D imension s( mm): So ur ce unit

178(W)x50(H)x157(D)

Remote control unit

44(W)x110(H)x27(D)

NOTE* We cannot supply PWB with component parts in principle. When a

circuit on PWB has failure, please repair it by component parts


2/11

COMPONENTS

PE-2561B-A/PE-2561K-A/B

Source unit 1

Mounting bracket 300-4976-00 1

300-7742-00 1

DCP case 335-6035-20 1

Escutcheon(OUT-ES) 370-6037-00 1

Extension lead 854-6349-50 1

Remote control unit RCB-164-600 1

Battery(SUM-3) 1

Parts bag

Removal key 331-2497-00 2

Screw 716-0496-01 1

Screw 716-0872-11 1

To engineers in charge of repair or inspecti-on of our products.

Before repair or inspection, make sure to follow the inst-

ructions so that customers and Engineers in charge of

repair or inspection can avoid suffering any risk or injury.

1. Use specified parts.

The system uses parts with special safety features against fire

and voltage. Use only parts with equivalent characteristics whenreplacing them.

The use of unspecified parts shall be regarded as remodeling for

which we shall not be liable. The onus of product liability (PL) shall

not be our responsibility in cases where an accident or failure is as

a result of unspecified parts being used.

2. Place the parts and wiring back in their original positions after

Disconnect the battery terminal after turning the ignition key off.

If wrong wiring connections are made with the battery connected,

a short circuit and/or fire may occur. If extensive damage is

caused due to negligence of repair, the legal responsibility shall

be with the repairing company.

5. Cautions regarding chips.

Do not reuse removed chips even when no abnormality is ob-

served in their appearance. Always replace them with new ones.

(The chip parts include resistors, capacitors, diodes, transistors,

etc).The negative pole of tantalum capacitors is highly suscep-

tible to heat, so use special care when replacing them and

check the operation afterwards.

6. Cautions in handling flexible PWB

Before working with a soldering iron, make sure that the iron tip

temperature is around 270 C. Take care not to apply the iron tip

repeatedly (more than three times) to the same patterns. Also

take care not to apply the tip with force.

7. Turn the unit OFF during disassembly and parts replacement.

Recheck all work before you apply power to the unit.

8. Cautions in checking that the optical pickup lights up.

The laser is focused on the disc reflection surface through the

lens of the optical pickup. When checking that the laser optical

diode lights up, keep your eyes more than 30cms away from

the lens. Prolonged viewing of the laser within 30cms may dam-age your eyesight.

9. Cautions in handling the optical pickup

The laser diode of the optical pickup can be damaged by elec-

trostatic charge caused by your clothes and body. Make sure

to avoid electrostatic charges on your clothes or body, or dis-

charge static electric ity before handling the optical pickup.

9-1.Laser diode

The laser diode terminals are shorted for transportation in

order to prevent electrostatic damage.After replacement, open the shorted circuit. When removing

the pickup from the mechanism, short the terminals by sol-

dering them to prevent this damage.

9-2.Actuator

The actuator has a powerful magnetic circuit. If a magnetic

material is put close to it, its characteristics will change. En-

sure that no foreign substances enter through the ventilation

slots in the cover.

9-3.Cleaning the lens

Dust on the optical lens affects performance. To clean the

lens, apply a small amount of isopropyl alcohol to lens paper

and wipe the lens gently.

FEATURES1. MP3 and WMA File Playable with ID3-TAG and WMA-TAG Display

2. DUAL ZONE Control with Dedicated RCA Line Level Outputs

3. 1-Bit D/A Converters and 8-Times Oversampling Digital Filter

4. Z-ENHANCER PLUS for Sound Creation with 4 Adjustment Modes

(2-Band P.EQ)

5. MAGNA BASS EX for Dynamic Bass Tuning, Volume LevelDependent

6. Flip Down Detachable Aluminum Face with 80-Variable Color LC

Display and Control Buttons

7. Screen Saver with User Programmable MESSAGE

INFORMATION

8. CeNET with Balanced Audio Line Transmission and Dynamic

Noise Canceling

CHANGING THE RECEPTION AREA


3/11

CAUTIONUse of controls, adjustments, or performance of procedures other

than those specified herein, may result in hazardous radiation

exposure.

The COMPACT DISC player and mini disc player should not be

adjusted or repaired by anyone except properly qualified servicepersonnel.

Bottom view of Source Unit

That means 50 channels of completely commercial-free music.

Plus up to 50 more channels of news, sports, and entertainment

from names like CNBC, Discovery, SCI-FI Channel, A&E, House

of Blues, E!, NPR, Speedvision and ESPN.

Sirius is live, dynamic entertainment, completely focused onlisteners. Every minute of every day of every week will be different.

All 50 commercial-free music cahnnels are created in-house and

hosted by DJs who know love the music. Do you like Reggae?

How about Classic Rock or New Rock?

Sirius has an array of choices spanning a vast range of musical

tastes including the hits of 50 s, 60 s, 70 s, 80 s as well as Jazz,

Country, Blues, Pop, Rap, R&B, Bluegrass, Alternative, Classical,

Heavy Metal, Dance and many others...

From its state-of-the-art, digital broadcasting facility in Rockfeller

Center, New York City, Sirius will deliver the broadcast, deepest

mix of radio entertainment from coast to coast.

Sirius will bring you music and entertainment programing that is

simply not available on traditional radio in any market across the

country.

It s radio like you ve never heard before.

So Get Sirius and Listen Up! For more information, visit siriusradio.

com.

286-

Clarion Co.,Ltd.MADE IN

MODEL

12V GROUND

AM 530-1710kHz/FM 87.9-107.9 MHz

SERIAL No.

PE-

T HIS DEVICE COMPLIES WIT H PART 15 OF T HE F CC RULES.OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

(2)THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,

INCLUDING INT ERF ERENCE T HAT MAY CAUSE UNDESIREDOPERATION.

T HIS PRODUCT ION COMPLIES WIT H DHHS RULES 21 CF RSUB-CHAPT ER J APPLICABLE AT DAT E OF MANUF ACT URE.

CLARION CO., LTD.50 KAMITODA, TODA-SHI, SAITAMA-KEN, JAPAN.

MANUFACTURED:

What is Sirius Satellite Radio?Sirius is radio the way it was meant to be: Up to 100 new channels

of digital quality programming delivered to listeners coast to coast

via satellite.

ERROR DISPLAYS

If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem.

Error Display Cause Measure

A DISC is loaded upside-down inside the CD deck anddoes not play.

Eject the disc then reload it properly.

ERROR 2 A DISC inside the CD changer is not loaded. This is a failure of CD changers mechanism.

ERROR 3 A DISC inside the CD changer cannot be played due toscratches, etc.

Replace with a non-scratched, non-warped disc.

ERROR 6 A DISC inside the CD changer cannot be played beca-use it is loaded upside-down.

Eject the disc then reload it properly.

ERROR 2 An MD inside the MD changer is not loaded. This is a failure of MD changers mechanism.

ERROR 3 An MD inside the MD changer cannot be played due to

scratches etc

Replace with a non-scratched, non-warped disc.

ERRO R H Displayed when the temperature in the MD changer is

too high and playback has been stopped automatically.

Lower the surrounding temperature and wait for

a while to cool off MD changer.

A DISC is caught inside the CD deck and is not ejected. This is a failure of CD deck's mechanism.ERROR 2

ERRO R 3 A DISC cannot be played due to scratches, etc. Replace with a non-scratched, non-warped disc.CD/MP3/

WMA

CD

changer

MD

changer

Mode

ERROR 6


4/11


5/11

BLOCK DIAGRAM


6/11

CIRCUIT DIAGRAM:

CD PWB(B3) section 1/2

-17-DXZ735MP

LED PWB (B4)-B

LED PWB (B4)-A

S101

S102

D102D101AN1105W-RR AN1105W-RR

Q102PS1192H PS1192H

Q101

TR-ATR-B

J101

816-2624-50 FLAT WIRE

TO 15PAGE PICK UP UNITTO18PAGECDPW

BSECTION2/2


7/11

CIRCUIT DIAGRAM:

CD PWB(B3) section 2/2

-1 -8 DXZ735MP

TO21PAGEMAINPWBJ900

TO 17PAGE CD PWB SECTION1/2

TO 17PAGE CDPWB SECTION1/2

TO17PAGECDPWBSECTION1/2

TO17PAGECDPWBSECTION1/2

TO 17PAGE CDPWB SECTION1/2


8/11

CIRCUIT DIAGRAM:

Switch PWB (B2) section

-19-DXZ735MP

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1


9/11

CIRCUIT DIAGRAM:

Main PWB (B1) section 1/4

-21-DXZ735MP

FROM 19

J3


10/11

CIRCUIT DIAGRAM:


-22-DXZ735MP



11/11

CIRCUIT DIAGRAM:


-23-DXZ735MP

1

8 16

9

1

1

3

10

Documents

Clarion D X Z 735 MP