Embed Size (px)
Citation preview
MARTIN ENGINEERINGleading international developer, manufacturer and supplier of innovations to make the handling of bulk materialsCLEANER, SAFER AND MORE PRODUCTIVE.
Patents and patents pending ® Registered trademark of Martin Engineering Company in the US and other select locations. © 2014 Martin Engineering Company.
SERVICE SOLUTIONSMARTINPLUS® FIELD SERVICES
5
FOUNDATIONS™ BOOKTHE PRACTICAL RESOURCE FOR CLEANER, SAFER, MORE PRODUCTIVE DUST & MATERIAL CONTROL
SILO CLEANING
Knock down buildups and blockages in storage vessels to recover capacity, flow rate and “lost” material.
LASER SURVEY
Precision lasers analyze conveyor structure and components to identify the root causes of misalignment.
SITE SURVEY
Specialists inspect your conveyor to evaluate conditions and assess opportunities for improvement.
DUST MONITORING
On-site inspection and measurement of your system’s airborne and fugitive dust accumulation.
MATERIAL FLOW MODELING
Material is analyzed through Discrete Element Modeling (DEM) to optimize material flow and minimize airborne dust.
CARRYBACK ANALYSIS
Measurement and assessment of your conveyor carryback, identifying areas for reduction and efficiency improvements.
TRAINING AND CERTIFICATION
Workshops teach plant personnel to operate and maintain cleaner, safer and more productive conveyors.
INSTALLATIONMAINTENANCEPROCESS IMPROVEMENT
INSPECT AND ADJUST
At predetermined levels, certified technicians inspect your system, clean and adjust components and provide a detailed report on conveyor condition and performance.
REPAIR AND REPLACE
This package improves the availability and efficiency of your belt conveyor system or air cannon system and your plant workers. It includes the timely replacement of wear parts or repair of Martin Engineering components.
IMPROVE AND OPTIMIZE
Our technicians take ownership of maintaining your belt conveyors and air cannons, replacing components and upgrading as required and seeking opportunities to improve performance.
Over the past 20 years Martin Engineering has presented over 500 workshops to more than 15,000 participants from bulk-materials-handling operations around the world, enabling workers to operate and maintain cleaner, safer and more productive belt conveyors.
The results of Foundations™ Training:- Personnel are properly trained- Belt conveyors are more efficient- Plant is cleaner, safer and more productive- Operation is more profitable!
Belt conveyors are the basic building block of bulk-materials handling. For a plant to be efficient, the conveyor systems must be clean, safe and productive.
The two goals of any bulk-materials handling operation should be to improve conveyor safety and to improve conveyor efficiency.
To better help your operation achieve these goals, Martin Engineering has expanded the Foundations™ training workshop into three programs to fit the needs of individuals and companies with varied levels of experience and responsibility.
All programs offer the opportunity for customization/localization (by prior arrangement) to feature images and discussion of specific equipment, conditions and problems.
FOUNDATIONS™TRAINING
A GLOBAL FAMILY
® Registered trademark of Martin Engineering Company in the US and other select locations.© 2015 Martin Engineering Company. Additional information can be obtained at www.martin-eng.com/trademarks.CLEANER, SAFER & MORE PRODUCTIVE BULK MATERIALS HANDLING
call +44(0)115 946 4746 | visit www.martin-eng.co.ukemail [email protected] | connect
visit martin-eng.co.uk | call +44(0)115-946-4746 | email [email protected]
BELT CLEANERS
PRIMARY CLEANERS
SECONDARY AND SPECIALTY CLEANERS
BELT CLEANER SYSTEMS from Martin Engineering make conveyor systems cleaner, safer and more productive. With belt cleaners, minimalized carryback results in…
Improved maintenance planning and conveyor availability as emergency outages, unscheduled downtime and “hurry-up” repairs are reduced.
Reduced maintenance expenses by lower labor costs for fewer and faster service procedures. Improved manpower utilization by fewer belt tracking and material cleanup chores.
Maximized equipment life by fewer replacements of prematurely worn components damaged by fugitive material and buildup.
Improved working conditions and plant safety and morale by better housekeeping.
visit martin-eng.co.uk | call +44(0)115-946-4746 | email [email protected]
FLOW AID SOLUTIONS
MARTIN® AIR CANNONS supply a quiet but powerful eruption of compressed air that dislodges buildups and enhances the flow of bulk materials, to improve efficiency and maintain profitability.
Since 1974, BIG BLASTER® Air Cannons have been used around the world to prevent buildups and improve material flow. Martin Engineering remains the leader in the application of air cannon technology to overcome bottlenecks and boost the movement of material through high-capacity vessels.
MARTIN® AIR CANNONS
Tornado® Dualport® BigBlaster® Multiport®
MARTIN® NOZZLES
High temperature nozzles and pipes Retractable air cannon nozzle High speed air cannon nozzle
Designed to protect personnel from hazards and risks.
SAFETY SOLUTIONS
Safety Shield for Air Cannons (Manual)
Safety Shield for Air Cannons (Automatic)
Retrofit Air Cannon Valve (for any other tank)
32
TRANSFER POINT SOLUTIONS
1
2
3
4
5
6
UPPER TRACKER1 LOWER TRACKER2 SEALING SYSTEM3
PROTECTION PULLEY4 GUARDASEAL5 IMPACT CRADLE6
visit martin-eng.co.uk | call +44(0)115-946-4746 | email [email protected] 4
Martin® SQC2 Cleaner Martin® DT2S Cleaner Martin® QC2TM Cleaner Martin® Chevron Cleaner
Martin® QC1™ PD Cleaner Martin® QC1™ HD Cleaner Martin® QB1™ CleanerMartin® PV Cleaner
NEW
BELT SUPPORT For an effective, minimum-spillage transfer point, it is essential that the belt’s line of travel be stabilized with proper belt support in the load zone.
SEALING SYSTEM A crucial requirement in any transfer point designed for reduced spillage and high efficiency is an effective sealing system at the edge of the belt.
BELT TRACKING Belt tracking must be controlled before spillage can be eliminated.
TAIL PULLEY PROTECTION Pulley protection plows are installed to remove lumps and stray components from the belt before they can damage the pulley or belt.
