Upload
others
View
13
Download
0
Embed Size (px)
Citation preview
At Work For YouAt Work For You
Climbing formwork
CS 240 is a crane-dependent climbing system that can be used both as a load-bearing scaffold or as a working and safety scaffold.
CS 240 CLIMBING SCAFFOLD
At Work For You
Product advantages CS 240
Quick
Quick and effective final assembly of the accessory parts on site
Economical
Climbing scaffold units can be pre-assembled according to project requirements and arrive on site ready to use
Easy handling
Formwork can be rolled back from concrete by means of move-off unit
Safe
Guardrail posts ensure that all platforms are safe
Versatile High adaptability and load-carrying capacity of the climbing scaffold
Usable either with frame panel or timber beam wall formwork
Applicable for great heights of more than 100 m
CS 240 H is usable on inclined walls up to 30°.
Formwork can be rolled back from concrete by means of move-off unit
For versatile application: The CS 240 climbing scaffold with retractable formwork, available in two different versions: either as CS 240 L for use with wall formwork with through ties in concreting position or as CS 240 H for use on inclined walls up to 30°.
Product description CS 240 L Climbing scaffoldPlatform widths Working platform: 2.40 m | Trailing platform: 2.02 m | Pouring platform: 0.82 m
Maximum formwork height 5.40 m
Clearance from concrete Up to 83 cm
Relevant standards Load-bearing scaffold accord. to EN 12811 Working and safety scaffolds accord. to EN 12811 part 1
Influence width per CS brackets With 4 m formwork height, up to 4.75 m (depending on wind load)
Handling Crane
Formwork MANTO | H 20 wall formwork | PLATINUM 100
Application above ground Up to 100 m and higher (accord. to statics)
Product description CS 240 H Climbing scaffoldPlatform widths Working platform = 2.60 m | Trailing platform = 2.02 m | Pouring platform = 1.30 m
Maximum formwork height 5.40 m
Clearance from concrete Up to 95 cm
Relevant standards Load-bearing scaffolds accord. to EN 12811 Working and safety scaffolds accord. to EN 12811 part 1
Influence width per CS brackets With 4 m formwork height, up to 4.75 m (depending on wind and concrete load)
Handling Crane
Application above ground Up to 100 m and higher (accord. to static calculation)
Max. formwork height for use as dam bracket
3.90 m (accord. to static calculation)
Inclined walls Up to ± 30° (accord. to static calculation)
Applicable for great heights of more than 100 m
Technical specifications CS 240
CS 240 H
Overview of the main system components of the CS 240 L and CS 240 H climbing scaffolds with one trailing platform
Frame formwork
Concreting platform, width = 1.30 m
Formwork beam
Customized wall formwork
Push-pull spindle
Formwork height
adjustment
Wind securing device
1. trailing platform, width = 2.02 m
Working platform beam
Working platform, width = 2.40 m
Formwork panel
Bracket anchoring
Move-off carriage
CS 240 L
Anchor
Concreting platform, width = 1.30 m
Formwork beam
Push-pull spindle
Formwork height
adjustment
Move-off carriage
Wind securing device
1. trailing platform, width = 2.02 m
Working platform beam
Working platform, width = 2.60 m
Formwork panel
Bracket anchoring
CS 240 H
CS 240 integrates with
MANTO® PLATINUM 100 H 20 wall formwork
Application & Use
Wall formwork Inclined walls
UAEPhone: +971 4 8132000
EgyptPhone: +202 2359 1568
Saudi ArabiaPhone: +966 12 691 7690
MalaysiaPhone: +60 3 42965455
SingaporePhone: +65 68 626122