Embed Size (px)
Citation preview
Close Coupled End Suction Centrifugal Pump 3D SERIES
EBARA Pumps Malaysia Sdn Bhd6, Jalan TP3, UEP Subang Jaya Industrial Park,47620 Subang Jaya, Selangor, Malaysia.Tel : 03-8023 6622 Fax : 03-8023 9355Email : [email protected] Website : www.ebara.com.my
EPM 3D SERIES 1114
* All specifications are subject to change without prior notice.* Dimensional details are provided for reference only.
Authorised dealer:
PUMP
Close Coupled End SuctionCentrifugal Pump Type 3D SERIES
APPLICATIONS
FEATURES
• 3D SERIES is the new EBARA range of close coupled pumps (3D) and standardized pumps manufactured according to EN733 (3DS-3DP) with cast iron body and AISI 304 or AISI 316 stainless steel impeller.• 3D, 3DS and 3DP pumps represent a versatile range suitable for a lot of applications and offer significant advantages in terms of reliability, efficiency and cost saving.• The pumps are “Back pull-out” design: the motor, the coupling, the support and the impeller can be removed without disconnecting the pump body from the pipes.
• Handling of water and clean, chemically non-aggressive liquids. Water supply - Boosting system
EBARA introduces the 3D SERIES which is perfectly interchangeable with the 3 SERIES stainless steel range. The stainless steel hydraulic section and the motor are manufactured according to EBARA's rigorous standards and are the same on both product versions. This allows significant advantages to both the end user and the installer, as you can transform the product based on the application simply purchasing the pump body and keeping intact the extraordinary performances of the stainless steel hydraulics. Moreover, the complete 3D SERIES and 3 SERIES ranges can be customized with different mechanical seals and motors.
• Washing plants - Industry• Water circulation in climate control systems• Irrigation - Agriculture
PERFORMANCE CHART (4 POLE)
at 1450 min-1
(according to ISO 9906 Attachment A)
3D SERIES (.)4 32
3D SERIES (.)4 40
3D SERIES (.)4 50
3D SERIES (.)4 65
Close Coupled End Suction Centrifugal Pump 3D SERIESClose Coupled End Suction Centrifugal Pump 3D SERIES
PERFORMANCE CHART (2 POLE)
at 2900 min-1 (according to ISO 9906 Attachment A)
3D SERIES (.) 32
3D SERIES (.) 40
3D SERIES (.) 50
3D SERIES (.) 65
(M) Single-phase version only for 3D SERIES
CONSTRUCTION
SPECIFICATIONS
• Available with 50Hz (2 and 4 poles)• Perfectly interchangeable with the stamped steel 3 SERIES version• High energy efficiency up to 85% thanks to the impeller and new volute: MEI > 0.4• Cast iron pump body EN-GJL-250-EN 1561• Mechanical seal conforming to EN12756 (ex DIN 24960)• AISI 304 stainless steel impeller, stamped and welded with laser technology, for sizes 32, 40 and 50; AISI 316 microcasted steel for all size 65 versions
• 50Hz version : Flow rate up to 138 m3/h Head up to 71 m• Temperature of the pumped liquid : from -5°C to +90°C for the standard version from -5°C to +110°C for the H-HS-HW-HSW versions from -5°C to +120°C for the E version• Maximum operating pressure : 10 bar (PN 10) • Cast iron pump body EN-GJL-250-EN 1561 • Mechanical seal conforming to EN12756 (ex DIN 24960)• 3DP SERIES available in the bare shaft version (3DPF)
• IE2 motors according to Regulation (CE) no. 640/2009 and IEC 60034-30; IE3 upon request• Protection rating: IP55• Insulation class: F • Performances according to EN 60034-1• Continuous operation
PUMP
MOTOR
Back pull-out design
The motor, the coupling, the support and the
impeller can be removed without disconnecting the
pump body from the pipes.
A
C
B
A
B
C
Motors:
Pump Body :
Impeller :
Support structure :• Reinforced to with stand forces and stresses of the plant
• High resistant to pipe stresses, thanks to its cast iron structure with integrated support feet• High accurate design to reduce pressure losses• Perfectly interchangeable with the 3 SERIES stamped steel body
• Made of stainless steel, with high hydraulic efficiency and excellent NPSH value• Hydraulically balanced to prevent axial thrust towards the seal• Efficiency level exceeding 85% for size 65 pumps
• IE2• IE3 from 7.5kW up to 22kW• Other version available upon request.
Close Coupled End Suction Centrifugal Pump 3D SERIESClose Coupled End Suction Centrifugal Pump 3D SERIES
PERFORMANCE CHART (2 POLE)
at 2900 min-1 (according to ISO 9906 Attachment A)
3D SERIES (.) 32
3D SERIES (.) 40
3D SERIES (.) 50
3D SERIES (.) 65
(M) Single-phase version only for 3D SERIES
CONSTRUCTION
SPECIFICATIONS
• Available with 50Hz (2 and 4 poles)• Perfectly interchangeable with the stamped steel 3 SERIES version• High energy efficiency up to 85% thanks to the impeller and new volute: MEI > 0.4• Cast iron pump body EN-GJL-250-EN 1561• Mechanical seal conforming to EN12756 (ex DIN 24960)• AISI 304 stainless steel impeller, stamped and welded with laser technology, for sizes 32, 40 and 50; AISI 316 microcasted steel for all size 65 versions
• 50Hz version : Flow rate up to 138 m3/h Head up to 71 m• Temperature of the pumped liquid : from -5°C to +90°C for the standard version from -5°C to +110°C for the H-HS-HW-HSW versions from -5°C to +120°C for the E version• Maximum operating pressure : 10 bar (PN 10) • Cast iron pump body EN-GJL-250-EN 1561 • Mechanical seal conforming to EN12756 (ex DIN 24960)• 3DP SERIES available in the bare shaft version (3DPF)
• IE2 motors according to Regulation (CE) no. 640/2009 and IEC 60034-30; IE3 upon request• Protection rating: IP55• Insulation class: F • Performances according to EN 60034-1• Continuous operation
PUMP
MOTOR
Back pull-out design
The motor, the coupling, the support and the
impeller can be removed without disconnecting the
pump body from the pipes.
A
C
B
A
B
C
Motors:
Pump Body :
Impeller :
Support structure :• Reinforced to with stand forces and stresses of the plant
• High resistant to pipe stresses, thanks to its cast iron structure with integrated support feet• High accurate design to reduce pressure losses• Perfectly interchangeable with the 3 SERIES stamped steel body
• Made of stainless steel, with high hydraulic efficiency and excellent NPSH value• Hydraulically balanced to prevent axial thrust towards the seal• Efficiency level exceeding 85% for size 65 pumps
• IE2• IE3 from 7.5kW up to 22kW• Other version available upon request.
Close Coupled End Suction Centrifugal Pump 3D SERIES
* All specifications are subject to change without prior notice.* Dimensional details are provided for reference only.
PUMP
Close Coupled End SuctionCentrifugal Pump Type 3D SERIES
APPLICATIONS
FEATURES
• 3D SERIES is the new EBARA range of close coupled pumps (3D) and standardized pumps manufactured according to EN733 (3DS-3DP) with cast iron body and AISI 304 or AISI 316 stainless steel impeller.• 3D, 3DS and 3DP pumps represent a versatile range suitable for a lot of applications and offer significant advantages in terms of reliability, efficiency and cost saving.• The pumps are “Back pull-out” design: the motor, the coupling, the support and the impeller can be removed without disconnecting the pump body from the pipes.
• Handling of water and clean, chemically non-aggressive liquids. Water supply - Boosting system
EBARA introduces the 3D SERIES which is perfectly interchangeable with the 3 SERIES stainless steel range. The stainless steel hydraulic section and the motor are manufactured according to EBARA's rigorous standards and are the same on both product versions. This allows significant advantages to both the end user and the installer, as you can transform the product based on the application simply purchasing the pump body and keeping intact the extraordinary performances of the stainless steel hydraulics. Moreover, the complete 3D SERIES and 3 SERIES ranges can be customized with different mechanical seals and motors.
• Washing plants - Industry• Water circulation in climate control systems• Irrigation - Agriculture
PERFORMANCE CHART (4 POLE)
at 1450 min-1
(according to ISO 9906 Attachment A)
3D SERIES (.)4 32
3D SERIES (.)4 40
3D SERIES (.)4 50
3D SERIES (.)4 65
EBARA Pumps Malaysia Sdn Bhd6, Jalan TP3, UEP Subang Jaya Industrial Park,47620 Subang Jaya, Selangor, Malaysia.Tel : 03-8023 6622 Fax : 03-8023 9355Email : [email protected] Website : www.ebara.com.my
EPM 3D SERIES 1114
Authorised dealer:
