• cold stores• freezers• process spaces• outdoor covered areas

• cold stores• freezers• process spaces• outdoor covered areas

Internal heater

Battery pack

LED driver

The luminaire is equipped with an internal heating unit (composed of thermostat & heater) specially designed for optimized warm-up of battery to operate in the harsh environment of down to -20°C. In case of power failure the heating unit is not in operating mode. The battery lifetime depends on the actual operating environment conditions.

• Aluminium die cast;

• Glass; • CLASS II; • 8W 24 LED

(12+12)

160lm SE-SA-PS; • 24W 36 LED

(18+18)

224lm SE-SA-PS.

• AT - LG – LGFM• 1 - 3h;• Ni-MH battery;• 12h recharge time;• IP66 - IK09;• wall or recessed.

Progetto Ottico

Aluminium reflector

Progetto Ottico

LED light source

Cilindrical lens

Maximal uniformity on pictogram

Optical project

Top performance

W L B H8 391 174 59,524 391 174 59,5

Dimensions

1) untighten front screws2) open the fixture

Installation

3) install the body 4) wire it

Class II insulationInstallation

5) click mount front and body. Front gets automaticall powered

Installation

6) screw front on body

Installation of pictograms

d=30m

Part Number

Description

15010 SCHERMO DX/SX ACCIAIO EM15011 SCHERMO BASSO ACCIAIO EM

15012 STAFFA CONTROS/INCASSO ACC LED

Accessories

“Flag” installation

Recessed installation accessory Ceiling

Wall-ceiling recessed installation

Magnetic test button