Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
Coley InstrumentsBurnside Industrial Estate,Kilsyth, Glasgow.G65 9JX.
A Division of STEWART BUCHANAN GAUGES LTD
Tel: 01236 821533. Fax: 01236 824090. Email: [email protected]
stewarts-group.com
COLEY Instruments LONG ESTABLISHED MANUFACTURERS OF HIGH QUALITY PRESSURE & TEMPERATURE GAUGES
FOR THE HVAC INDUSTRYMATCHING PRODUCTS COMPLYING WITH M&E 3, M&E 6, M&E 100, Y11, EN837, BS1780 & BS5235
MANUFACTURED IN OUR KILSYTH FACTORY TO ISO9002 / BS5750
LARGE STOCK RANGE OF INSTRUMENTS AND ACCESSORIES OFFERING IMMEDIATE DELIVERY TO ANYWHERE IN THE UK
COMPANY LOGO’S SCREEN PRINTED ON DIALS BY ARRANGEMENT
TEST CERTIFICATES AVAILABLE FOR ALL OUR PRODUCTS
stewarts-group.com
Notes for Guidance
PRESSURE GAUGES
Steam & GasesFor pressure ranges 25 bar & above, FULL SAFETY PATTERN gauges must be used, details on request.For pressure ranges below 25 bar, Standard Gauges must be fitted with a blow out device. Please specify.For low pressure Natural Gas, we offer gauges to INP3 specification, details on request.Working PressuresWhilst gauges will withstand a full scale pressure, it is recommended that the working pressure should not exceed 75%of the scale for steady pressures; and 65% of the scale range for fluctuating pressures.Operating TemperatureAmbient and fluid temperatures acting upon the gauge should be within the range of –20 / +60deg C.To protect the gauge from a fluid that is too hot, a syphon or similar device must be installed close to the gauge to provide a condensate fluid in the pressure element.
TEMPERATURE GAUGES
It is recommended that the maximum working temperature does not exceed 60% of the scale range.Ambient temperatures acting upon the gauge should be within the range of –20 / + 60C.It is essential the bulb is not forced against the bottom of the pocket when tightening the stem nut. This can lead to an increase in pressure within the bulb and cause incorrect readings.Always allow an approximate 5mm gap in the bottom of the pocket before tightening the stem nut.
We manufacture a wide range of Instruments for all Industries and would be pleased to discuss any special requirements.
stewarts-group.com
PRESSURE GAUGES
• 100mm & 150mm Dial Sizes• Black Case with Chrome Bezel as standard• Stainless Steel Weatherproof Case for External Mounting• (Optional Glycerine Fill for Condensation)• Matching in appearance to our range of Thermometers• 3/8” BSP Bottom Connection• Loose Red Pointer• Compliant with Y11, M&E3, EN837, BS1780
6109P76106P74109P74106P70 – 20 Bar
6109P66106P64109P64106P60 – 14 Bar
6109P56106P54109P54106P50 – 10 Bar
6109P46106P44109P44106P40 – 6 Bar
6109P36106P34109P34106P30 – 4 Bar
6109P26106P24109P24106P20 – 2 Bar
6109P16106P14109P14106P10 – 1 Bar
150mm dialSurface Mount
150mm dialDirect Mount
100mm dialSurface Mount
100mm dialDirect Mount
Scale Range
Standard Ranges & Part Numbers
*For Weatherproof Case add - “SS” to Part Number. i.e. “4106P2 -SS”. Also available in other scales - Please enquire
stewarts-group.com
ALTITUDE GAUGES
• 100mm & 150mm Dial Sizes• Black Case with Chrome Bezel as standard• Stainless Steel Weatherproof Case for External Mounting• (Optional Glycerine Fill for Condensation)• Matching in appearance to our range of Thermometers• 3/8” BSP Bottom Connection• Loose Red Pointer• Compliant with Y11, M&E3, EN837, BS1780
6109A66106A64109A64106A60 – 10 Bar + Met
6109A56106A54109A54106A50 – 6 Bar + Met
6109A46106A44109A44106A40 – 4 Bar + Met
6109A36106A34109A34106A30 – 2.5 Bar + Met
6109A26106A24109A24106A20 – 1.6 Bar + Met
6109A16106A14109A14106A10 – 1 Bar + Met
150mm dialSurface Mount
150mm dialDirect Mount
100mm dialSurface Mount
100mm dialDirect Mount
Scale Range
Standard Ranges & Part Numbers
*For Weatherproof Case add - “SS” to Part Number. i.e. “4106A2 -SS”. Also available in other scales - Please enquire
stewarts-group.com
DIFFERENTIAL GAUGES
• 100mm & 150mm Dial Sizes• Black Case with Chrome Bezel as standard• Stainless Steel Weatherproof Case for External Mounting• (Optional Glycerine Fill for Condensation)• Matching in appearance to our range of Thermometers• 3/8” BSP Bottom Connections• Opposed Bourdon Tube Design• Compliant with Y11, M&E3, EN837, BS1780
OB11-6S5OB11-6D5OB11-4S5OB11-4D512 Bar0-3 Bar
OB11-6S4OB11-6D4OB11-4S4OB11-4D410 Bar0-2.5 Bar
OB11-6S3OB11-6D3OB11-4S3OB11-4D38 Bar0-2 Bar
OB11-6S2OB11-6D2OB11-4S2OB11-4D26 Bar1-1.5 Bar
OB11-6S1OB11-6D1OB11-4S1OB11-4D14 Bar0-1 Bar
150mm Surface Mount
150mm Direct Mount
100mm Surface Mount
100mm Direct Mount
Max Line PressureDial Range
Standard Ranges & Part Numbers
Due to the wide range available, these instruments are strictly made to order only.The ratio between maximum line pressure and dial range must be no more than 4 : 1.A selection of ranges in Bar are shown above. Other scales are available, details on request.
stewarts-group.com
MIS THERMOMETERS to suit 21/2” Pocket
• 100mm & 150mm Dial Sizes• Black Case with Chrome Bezel as standard• Stainless Steel Weatherproof Case for External Mounting• (Optional Glycerine Fill for Condensation)• Matching in appearance to our range of Pressure Gauges• 1/2” BSP Pockets in Stainless Steel or Brass• Lagging extension on stem or on extended pockets• Compliant with Y11, M&E3, BS5235
M6101L2DM6101R2DM61002DM61062D0-60CCOND. WTR
M6101L2CM6101R2CM61002CM61062C0-200CHTHW
M6101L2BM6101R2BM61002BM61062B-20+40CCHILL. WTR
150mm dial Left Entry
150mm dialRight Entry
150mm dial Back Entry
150mm dialBottom Entry
Scale RangeService
M6101L2AM6101R2AM61002AM61062A0-120CLTHW/HTG
M4101L2DM4101R2DM41002DM41062D0-60CCOND. WTR
M4101L2CM4101R2CM41002CM41062C0-200CHTHW
M4101L2BM4101R2BM41002BM41062B-20+40CCHILL. WTR
M4101L2AM4101R2AM41002AM41062A0-120CLTHW/HTG
100mm dial Left Entry
100mm dialRight Entry
100mm dial Back Entry
100mm dialBottom Entry
Scale RangeService
Standard Ranges / Part Numbers to suit 2 ½” pocket
*For Weatherproof Case add - “SS” to Part Number. i.e. “M41062A -SS”. Also available in other scales - Please enquire
stewarts-group.com
MIS THERMOMETERS to suit 4” Pocket
• 100mm & 150mm Dial Sizes• Black Case with Chrome Bezel as standard• Stainless Steel Weatherproof Case for External Mounting• (Optional Glycerine Fill for Condensation)• Matching in appearance to our range of Pressure Gauges• 1/2” BSP Pockets in Stainless Steel or Brass• Lagging extension on stem or on extended pockets• Compliant with Y11, M&E3, BS5235
M6101L4DM6101R4DM61004DM61064D0-60CCOND. WTR
M6101L4CM6101R4CM61004CM61064C0-200CHTHW
M6101L4BM6101R4BM61004BM61064B-20+40CCHILL. WTR
150mm dial Left Entry
150mm dialRight Entry
150mm dial Back Entry
150mm dialBottom Entry
Scale RangeService
M6101L4AM6101R4AM61004AM61064A0-120CLTHW/HTG
M4101L4DM4101R4DM41004DM41064D0-60CCOND. WTR
M4101L4CM4101R4CM41004CM41064C0-200CHTHW
M4101L4BM4101R4BM41004BM41064B-20+40CCHILL. WTR
M4101L4AM4101R4AM41004AM41064A0-120CLTHW/HTG
100mm dial Left Entry
100mm dialRight Entry
100mm dial Back Entry
100mm dialBottom Entry
Scale RangeService
Standard Ranges / Part Numbers to suit 4” pocket
*For Weatherproof Case add - “SS” to Part Number. i.e. “M41064A -SS”. Also available in other scales - Please enquire
stewarts-group.com
GF THERMOMETERS to suit 21/2” Pocket
• 100mm & 150mm Dial Sizes• Black Case with Chrome Bezel as standard• Stainless Steel Weatherproof Case for External Mounting• (Optional Glycerine Fill for Condensation)• Matching in appearance to our range of Pressure Gauges• 1/2” BSP Pockets in Stainless Steel or Brass• Lagging extension on stem or on extended pockets• Compliant with Y11, M&E3, BS5235
G6101L2CG6101R2CG61002CG61062C0-200CHTHW
G6101L2BG6101R2BG61002BG61062B-20+6CCHILL. WTR
150mm dial Left Entry
150mm dialRight Entry
150mm dial Back Entry
150mm dialBottom Entry
Scale RangeService
G6101L2AG6101R2AG61002AG61062A0-120CLTHW/HTG
G4101L2CG4101R2CG41002CG41062C0-200CHTHW
G4101L2BG4101R2BG41002BG41062B-20+60CCHILL. WTR
G4101L2AG4101R2AG41002AG41062A0-120CLTHW/HTG
100mm dial Left Entry
100mm dialRight Entry
100mm dial Back Entry
100mm dialBottom Entry
Scale RangeService
Standard Ranges / Part Numbers to suit 2 ½” pocket
*For Weatherproof Case add - “SS” to Part Number. i.e. “G41062A -SS”. Also available in other scales - Please enquire
stewarts-group.com
GF THERMOMETERS to suit 4” Pocket
• 100mm & 150mm Dial Sizes• Black Case with Chrome Bezel as standard• Stainless Steel Weatherproof Case for External Mounting• (Optional Glycerine Fill for Condensation)• Matching in appearance to our range of Pressure Gauges• 1/2” BSP Pockets in Stainless Steel or Brass• Lagging extension on stem or on extended pockets• Compliant with Y11, M&E3, BS5235
G6101L4CG6101R4CG61004CG61064C0-200CHTHW
G6101L4BG6101R4BG61004BG61064B-20+60CCHILL. WTR
150mm dial Left Entry
150mm dialRight Entry
150mm dial Back Entry
150mm dialBottom Entry
Scale RangeService
G6101L4AG6101R4AG61004AG61064A0-120CLTHW/HTG
G4101L4CG4101R4CG41004CG41064C0-200CHTHW
G4101L4BG4101R4BG41004BG41064B-20+60CCHILL. WTR
G4101L4AG4101R4AG41004AG41064A0-120CLTHW/HTG
100mm dial Left Entry
100mm dialRight Entry
100mm dial Back Entry
100mm dialBottom Entry
Scale RangeService
Standard Ranges / Part Numbers to suit 4” pocket
*For Weatherproof Case add - “SS” to Part Number. i.e. “G41064A -SS”. Also available in other scales - Please enquire
stewarts-group.com
BIMETAL THERMOMETERS
• 100mm & 150mm Dial Sizes• Black Case with Chrome Bezel as standard• Matching in appearance to our range of Pressure Gauges• Complete with 1/2” BSP Pockets in Brass
B209B64B208B64B209B44B208B44100mm-20+60CChill/Cond Wtr
B209B62B208B62B209B42B208B4250mm-20+60CChill/Cond Wtr
B209A64B208A64B209A44B208A44100mm0-120CLTHW/HTG
B209A62B208A62B209A42B208A4250mm0-120CLTHW/HTG
150mm Dial
Back Entry
150mm Dial
Bottom Entry
100mm Dial
Back Entry
100mm Dial
Bottom Entry
Pocket Length
Scale RangeService
Standard Ranges & Part Numbers
Note: No lagging extension on Bimetal Thermometers
stewarts-group.com
POCKETS FOR MIS & GF THERMOMETERS
• Pockets are threaded ½” BSP• Available in Stainless Steel or Brass• Extended Pockets have 50mm lagging extension• Standard Pockets have no lagging extension• Special Pockets are available on request• Heat conducting paste available on request
412BX412B212BX212BBrass
412SSX412SS212SSX212SSStainless Steel
4” Extended4” Standard2 ½” Extended2 ½” StandardPocket Material
Part Numbers
Spare Pockets for Bimetal Thermometers (NOT COMPATIBLE WITH MIS or GF)
2” X ½” BSP Brass Pockets - Type 212BMB4” X ½” BSP Brass Pockets - Type 412BMB
stewarts-group.com
GAUGE ACCESSORIES
3/8” BSP Mild Steel ‘U’ Syphon - Type No. 38MSU3/8” BSP Mild Steel Ring Syphon - Type No. 38MSR3/8” BSP Brass U Syphon - Type No. 38BRU3/8” BSP Brass Ring Syphon - Type No. 38BRR3/8” BSP S/S type ‘S’ Syphon - Type No. 38SSS
3/8” BSP F/F Brass Gauge Cock - Type No. 38GC3/8” BSP F/F S/S Needle Valves - Type No. 38SSNV3/8” BSP Brass Snubber - Type No. 38BS
Notes
Gauge CocksMaximum working pressure is 25 Bar.Maximum working temperature is 60C.For MTHW, HTHW & Steam applications we recommendOur 38SSNV needle valve.
SyphonsMaximum working pressure is 100 Bar.Maximum working temperature is 120C.For HTHW & Steam applications we recommend our 38SSS syphon.
stewarts-group.com
Tel: 01236 821533. Fax: 01236 824090. Email: [email protected]
OTHER PRODUCTSBeing part of the STEWARTS group we have available one of thewidest range of Pressure & Temperature Instruments & Valves on the market today.These Include: Test Gauges, Distant Reading Thermometers, Safety Pattern Gauges and Much more.
Please enquire for any instrument item you may require.