Embed Size (px)
Citation preview
Collets on pressureSpecial colletsPick-up colletsGuide bushingsBar feed colletsCAV bar feed colletsInside clamping sleevesRotating insertsTurbo-bar feed colletsTurbo rotating insertsVKK
With the new productnavigator you will easily find thecollet needed for your machine.
Visit us onlinewww.edgetechnologies.com
EdgeOnline
SUMMARY.
Custom Solutions 2
Products 6
CUSTOM SOLUTIONS
Edge Technologies I www.edgetechnologies.com2
S-Slot guide bushing
• Ideal if high-pressure cleaning is used in the machine, no chip and dirt debris
in the guide bush
• Concentricity of the guide bush <0.005 mm
• Deviations of the material can be bypassed
• Ideal for square- and hex material
• Even guiding
• Guiding without marks on the material
• Easy to clean after the use
S-Slot collet
• Clamping without marks on the material
• Concentricity of the collet <0.005 mm
• Deviations of the material can be by-passed
• Ideal for square- and hex material
• High and even tension
• No debris in the collet, since it completely closes
• Easy to clean after the use
SB guide bushing
• Ideal for swiss type machines
• For materials with hard gliding properties, like titanium
• Prevents welding of guiding area and part (Stick-Slip-Effect)
BL guide bushing
• For titanium processing, has better gliding properties
• Ideal for smaller quantities, is the less expensive alternative to the SB guide bush
• Prevents the welding of the material in the guide bush
Brass-/ Synthetic- / Aluminum collets
• Prevents stains on the material
• Inserts are exchangeable after wearing and tearing
• Ideal for material sensitive to scratching and excellent for smooth pick-up
Long-nose guide bushing
• Improves the stability of the part, when used with power-tools, by shifting
the guiding area forward
CUSTOM SOLUTIONS
Special Collets
• Various special profiles, steps and adaptation to partial contours realizable
Overgripping collet
• Used on a pick-off spindle when it is required to clear a shoulder and grip on
a smaller diameter beyond (over the shoulder collet)
Guide bush with extended HM-insert (carbide insert)
• Guiding surface up to 40 mm
• Machining of a bigger part spectrum
• High concentricity
Closed bar feed collets
• Reduces the changeover time due to complete use of the channel
• Higher holding time due to closed slots
• Available in all common models and also usable for profile material
Collets with carbide insert
• All the standard collets are available with carbide insert
• advantage: larger endurance
Step collet
• Clamping on two different diameters possible
• Available for all collet types
Edge Technologies I www.edgetechnologies.com 3
ALL COLLETS WITH THE FOLLOWING INNER CONTOURS AVAILABLE:
Edge Technologies I www.edgetechnologies.com4
Smooth
• Standard up to ø 5,9• Bigger sizes also available in smooth with additional cost
Serrated
• Standard grooved from diameter ø 6,0 and above
Serrated
• vertical & horizontal grooved (L & Q)
ALL COLLETS WITH THE FOLLOWING INNER CONTOURS AVAILABLE:
Carbide coating• (inside)
Supergrip
Edge Technologies I www.edgetechnologies.com 5
DEAD LENGTH COLLETS SERIES 100
part no. ø d(mm)
D d
L
A
l
K°S
ø D(mm)
length L (mm) coneα (degree) inside shape clamping range (mm)
16
21
20
22
16
15
16
42
30
47,5
41
64
46
64
12
13,7
15,5
18,7
19
19,5
21
8
8
10
11
13
14
15
101 E
102 E
109 E
112 E
116 E
118 E
120 E
1,0
1,5 - 2,5
3,0 - 6,0
0,5 - 6,0
0,5 - 0,9
1,0
1,5 - 2,5
3,0 - 7,0
PR
0,5 - 8,0
PR
1,0 - 2,5
3,0 - 10,0
4,0 - 8,0
0,5 - 10,5
PR
0,5 - 0,9
1,0 - 1,5
2,0 - 2,5
3,0 - 12,0
12,5 - 13,0
2,0 - 3,5
4,0 - 8,0
10,0
0,5
0,5
0,5
0,1
0,5
0,5
PR
0,5
PR
0,5
0,5
1,0
0,5
PR
0,1
0,5
0,5
0,5
0,5
0,5
0,5
>> Table to be continued
Edge Technologies I www.edgetechnologies.com6
ø A(mm)
length I (mm)
5
3
5,5
6
6
6
6
8
9
10
12
13
15
15
increments (mm)
F 8
F 10
F 13
F 15
PR = per request
Custom solutions can be delivered for all dead length collets.
TF8
TF10
TF15
DEAD LENGTH COLLETS SERIES 100
Edge Technologies I www.edgetechnologies.com 7
16
15
16
64
54
67
21
26
28
16
20
20
1212 E
136 E
138 E
0,5 - 0,9
1,0 - 2,5
3,0 - 12,0
3,0 - 10,0
0,5 - 0,9
1,0 - 1,5
2,0 - 2,5
3,0 - 16,0
16,5 - 17,0
3,0 - 3,5
4,5 - 7,5
4,0 - 14,0
4,0 - 10,0
0,5 - 0,9
1,0 - 1,5
2,0 - 2,5
3,0 - 16,0
16,5 - 17,0
4,0 - 6,0
7,0 - 14,0
7,0 - 11,0
0,1
0,5
0,5
1,0
0,1
0,5
0,5
0,5
0,5
0,5
1,0
1,0
1,0
0,1
0,5
0,5
0,5
0,5
1,0
1,0
1,0
16
19
21
6
5
7
>> Table to be continued
F 16
F 20-201
F 20-87
All collets mentioned in this catalog can be delivered with a long nose.
part no. ø d(mm)
ø D(mm)
length L (mm) coneα (degree) inside shape clamping range (mm)ø A(mm)
length I (mm) increments (mm)
TF16
TF20
D d
L
A
l
K°S
DEAD LENGTH COLLETS SERIES 100
Edge Technologies I www.edgetechnologies.com8
15
16
15
16
15
55
77
70
80
65
30
35
38
42
38
22
25
28
30
30
140 E
145 E
148 E
157 E
EF 30
0,5 - 0,9
1,0
1,5 - 2,5
3,0 - 16,0
16,5 - 18,0
4,0 - 15,0
4,0 - 10,0
0,5 - 0,9
1,0
1,5 - 2,5
3,0 - 20,0
20,5 - 22,0
4,0 - 6,0
7,0 - 17,0
7,0 - 14,0
1,5 - 2,5
3,0 - 24,0
24,5 & 25,0
4,0 - 6,0
7,0 - 16,0
17,0 & 19,0
18,0 & 20,0
0,5 - 2,9
3,0 - 24,5
25,0 - 27,0
5,0 - 6,5
7,0 - 17,0 & 19,0
18,0
20,0
3,0 - 25,0
5,0 - 17,0 & 19,0
0,1
0,5
0,5
0,5
1,0
1,0
0,1
0,5
0,5
0,5
1,0
1,0
1,0
0,5
0,5
1,0
1,0
0,1
0,5
0,5
0,5
1,0
0,5
1,0
>> Table to be continued
21
27
28
34
32
6
10
7
10
6
F 22
F 25
F 28
F 30
1446 E
part no. ø d(mm)
ø D(mm)
length L (mm) coneα (degree) inside shape clamping range (mm)ø A(mm)
length I (mm) increments (mm)
TF22
TF25
TF30
All long nose collets can also be delivered with special tooling spaces
AD
I
L
d
SK°
DEAD LENGTH COLLETS SERIES 100
AD
I
L
d
SK°
161 E
163 E
F 37
164 E
Edge Technologies I www.edgetechnologies.com 9
32
35
37
38,08
45
48
47
49
75
80
92
108
15
15
16
15
0,5
0,5
0,5
1,0
1,0
1,0
0,5
0,5
0,5
0,5
1,0
1,0
1,0
1,0
1,0
0,1
0,5
0,5
0,5
1,0
1,0
1,0
1,0
1,0
1,0
1,0 - 1,5
2,0 - 2,5
3,0 - 26,0
26,5 & 27,0
28,0
4,0 - 16,0
17,0 & 19,0 & 22,0
18,0 & 20,0 & 21,0
5,0 - 6,0
7,0 - 16,0 & 18,0
17,0 & 19,0
1,0 - 1,5
2,0 - 2,5
3,0 - 30,0
30,5 - 32,0
4,0 - 6,0
7,0 - 17,0
18,0 & 20,0 & 21,0
23,0 & 25,0 & 26,0
19,0 & 22,0 & 24,0 & 27,0
5,0 - 6,0
7,0 - 16,0 & 18,0
17,0 & 19,0
20,0 - 22,0
0,5 - 0,9
1,0 - 2,5
3,0 - 32,0
32,5 - 33,0
4,0 - 27,0
4,0 - 23,0
2,0 & 2,5
3,0 - 32,0
32,5 & 33,0
4,0 - 6,0
7,0 - 27,0
7,0 - 22,0
>> Table to be continued
34
38
40
38
8
8
10
9
F 32
F 35
1536 E
F 38
part no. ø d(mm)
ø D(mm)
length L (mm) coneα (degree) inside shape clamping range (mm)ø A(mm)
length I (mm) increments (mm)
TF37
DEAD LENGTH COLLETS SERIES 100
Edge Technologies I www.edgetechnologies.com1 0
>> Table to be continued
part no. ø d(mm)
ø D(mm)
length L (mm) coneα (degree) inside shape clamping range (mm)ø A(mm)
length I (mm) increments (mm)
15
16
15
94
92
94
55
53
60
42
43
48
171 E
TF 43
173 E
0,5
0,5
1,0
1,0
1,0
1,0
1,0
1,0
1,0
0,5
0,5
0,5
0,5
1,0
1,0
1,0
1,0
1,0
3,0 - 36,0
36,5 - 38,0
4,0 - 14,0
15 & 16 & 18 & 20 & 21 & 23
25,0 - 31,0
17,0 & 19,0 & 22,0 & 24,0
4,0 - 14,0
15,0 - 26,0
3 - 38
4 - 32
4 - 27
1,0
1,5 - 2,5
3,0 - 42,0
42,5 - 43,0
4,0 - 5,5
6,0
7,0 - 14,0
17,0 & 19,0 & 22,0 & 24,0 & 27,0
15 & 16 & 18 & 20 & 21 & 23
25,0 & 26,0 & 28,0 & 29,0 & 31,0
33,0 - 35,0 & 37,0
30,0 & 32,0 & 36,0
4,0 & 5,0
6,0
7,0 - 14,0
15,0 - 24,0 & 26,0
25,0 & 27,0 - 30,0
42
46
50
9
10
9
F 42
F 48A
D
I
L
d
SK°
DEAD LENGTH COLLETS SERIES 100
Edge Technologies I www.edgetechnologies.com 1 1
part no. ø d(mm)
ø D(mm)
length L (mm) coneα (degree) inside shape clamping range (mm)ø A(mm)
length I (mm) increments (mm)
15
15
15
94
100
94
60
54
70
48
48
58
TF48
BS38komplett
177EF58
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0 - 43
4 - 37
4 - 30
1,0 - 40
5 - 34
5 - 28
4,0 - 9,0
10,0 - 52,0
8,0 - 12,0
13,0 - 22,0
23,0 - 27,0
28,0 - 36,0
37,0 - 42,0
43,0 - 44,0
8,0 - 12,0
13,0 - 22,0
23,0 - 27,0
30,0 - 36,0
50
44
60
9
10
9
Try our collets sealed.
>> Table to be continued
AD
I
L
d
SK°
Edge Technologies I www.edgetechnologies.com1 2
DEAD LENGTH COLLETS SERIES 100
15
15
15
110
115
130
84
106
107
66
88
90
185 E
190 E
193 E
1,0
1,0
0,5
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
3,0 - 7,0
8,0 - 60,0
60,5 - 62,0
61,0 - 65,0
8,0 - 17,0
19,0 & 22,0 & 24,0 & 27,0
7,0 & 18,0 & 20,0 & 21,0 & 23,0
25,0 & 26,0 & 28,0 & 29,0 & 31,0
38,0 & 41,0
30,0 & 32,0 & 36,0
33,0 - 35,0
37,0 & 39,0 & 40,0
42,0 - 55,0
7,0 - 14,0
15,0 - 19,0
21,0 & 23,0 & 24,0 & 26,0 & 32,0
20,0 & 22,0 & 25,0 & 28,0
27 & 29 & 30 & 31 & 33 & 34
35,0 - 41,0
60,0 - 80,0
20,0 - 80,0
short
73 9F 66
F 88
F 90
part no. ø d(mm)
ø D(mm)
length L (mm) coneα (degree) inside shape clamping range (mm)ø A(mm)
length I (mm) increments (mm)
AD
I
L
d
SK°
DRAW-IN COLLETS SERIES 300
part no. ø d (mm)
DS
K°
dG
L
ø D (mm) length L (mm) coneα (degree) inside shape clamping range (mm) increments (mm)
15
20
20
20
16
18
20
22,5
53
82
90
84
102
100
7
21,5
32
32
33,5
36
38
5
15
23
23
25
28
28
671 / 652
324 E
358 E
359 E
363 E
366 E
367 E
PR
1,0
1,5 - 2,5
3,0 - 13,0
0,5 - 0,9
1,0
1,5 - 2,5
3,0 - 20,0
20,5 & 21,5
3,5
4,0 - 6,0
4,5 - 6,5
7,0 - 14,0
16,0 & 18,0
0,5 - 20,0
1,5 - 2,5
3,0 - 22,0
PR
1,5 - 2,5
3,0 - 23,0
PR
0,5 - 0,9
1,0
1,5 - 2,5
3,0 - 24,0
PR
PR
0,5
0,5
0,1
0,5
0,5
1,0
1,0
1,0
0,5
0,5
0,5
PR
0,5
0,5
PR
0,1
0,5
0,5
PR
thread G
M 3,5 x 0,6
M 13 x 1
M 21 x 1
Tr. 23 x 1,5
M 23 x 1
Tr. 27 x 1/20“
Tr. 28 x 1,5
>> Table to be continued
PR = per request
Custom solutions can be delivered for all draw-in collets.
Edge Technologies I www.edgetechnologies.com 1 3
Edge Technologies I www.edgetechnologies.com1 4
DRAW-IN COLLETS SERIES 300
part no. ø d (mm) ø D (mm) length L (mm) coneα (degree) inside shape clamping range (mm) increments (mm)
10
20
83
110
37,5
45
31,75
32
385 E
386 E
1,5 - 2,5
3,0 - 26,0
4,0
5,0 - 6,0
7,0 - 16,0
5,5
17,0 & 19,0 & 22,0
18,0 &20,0 &21,0 &23,0
25,0 & 26,0
17,0 & 19,0
18,0
20,0 & 22,0
1,0
1,5 - 2,5
3,0 - 29,0
29,5 & 30,0
PR
0,5
1,0
1,0
1,0
0,5
0,5
PR
thread G
Tr. 32 x 1,5
outer thread:31,45 x 1/20“
inner thread:26,44 x 1,058
1510570,358KDT 38
B0385
8 - 44
10 - 36
10 - 30
1,0
1,0
1,0
M50 x 1,5
PR = per request
part no. ø d (mm) ø D (mm) length L (mm) coneα (degree) inside shape clamping range (mm) increments (mm)thread G
DS
K°
dG
L
PICK-UP COLLETS
part no. ø d (mm)
D S
I
L
dAK°
ø D (mm) length L (mm) Type Inside shape clamping range (mm) increments (mm)
Gauthier
Gauthier
Strohm
Strohm
Strohm
Strohm
Traub
Strohm
TNS 28
Manurhin K’MX
TNS 60
TNS 30 / 42
TNM 65
TNS 65
23
23
21
variable
17
variable
22
36
46
46
56
65
65
79,5
55,5
14
18
14,5
14,5
17
17
19
28
40
40
58
54,75
71,5
85
55
thread
thread
12
12
15
15
16
24
35
35
45
46
61,5
71
44,4
75 - 81.1410
75 - 14.0498
M 105
M 105
M 125
M 125
694285
M 205
612
612 M
719976
721
952
725070
722
1,0 - 7,0
1,0 - 10,0
1,0 - 8,5
3,0 - 8,0
1,0 - 12,0
1,0 - 12,0
1,0 - 10,0
2,5
3,0 - 20,0
PR
1,0 - 5,5
6,0 - 30,0
PR
1,0 - 5,5
6,0 - 30,0
PR
PR
1,0 - 7,5
8,0 - 42,0
PR
5,0 - 19,0
20,0 - 56,0
57,0 - 59,0
8,0 - 65,0
3,0 - 7,0
8,0 & 9,0
10,0 - 37,0
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
PR
PR
0,5
PR
PR
0,5
PR
1,0
PR
1,0
PR
1,0
1,0
1,0
1,0
1,0
1,0
ø A (mm)
11
12
10,5
10,5
13
13
13
22
32
32
48
62
42
length I (mm)
23
23
6
variable
2
variable
2,5
6
6
6
6
6
8,5
M 10 x 1
M 12 x 1
reinforced shaft
PR = per request
extended nose
extended nose
Custom solutions can be delivered for all pick-up collets.
Edge Technologies I www.edgetechnologies.com 1 5
Edge Technologies I www.edgetechnologies.com1 6
DRAW-IN COLLETS-SW
part no. ø d (mm)
DS
15°
d
G
L
ø D (mm) lenght L (mm) thread G inside shape clamping range (mm) increments (mm)
ø 19,7 x 1,666
ø 24,7 x 1,693
ø 24,7 x 1,693
ø 25,7 x 1,693
73
97,6
112
106
26,3
33,7
33,7
40
20
25
25
32
SW 20
SW 25
SW 25 VB
SB 32
0,5 - 1,0
1,5 - 2,5
3,0 - 14,5
14,5 - 16,0
PR
0,5 - 1,0
1,5 - 2,5
3,0 - 19,0
PR
0,5 - 1,0
1,5 - 2,5
3,0 - 19,0
PR
3,0 - 23,5
24 -28,0
PR
0,1
0,5
0,5
0,5
PR
0,1
0,5
0,5
PR
0,1
0,5
0,5
PR
0,5
0,5
PR
45° / 5°
45° / 5°
45° / 5°
45° / 5°
Custom solutions can be delivered for all draw-in collets with extended nose.
PR = per request
Edge Technologies I www.edgetechnologies.com 1 7
DRAW-IN COLLETS-HYDROMAT
G
d
L
D
S15°
31
31
44
50
53
part no. ø d (mm) ø D (mm) length L (mm) thread G inside shape clamping range (mm) increments (mm)
ø 19,7 x 1,666
ø 24,7 x 1,693
ø 29,7 x 1,693
ø 29,7 x 1,693
M 42 x 1,5
96,5
97,6
106
122
115
26,3
33,7
40
53
53
20
25
32
32
45
SHW 20
SHW 25
SHB 32
SHB 32 / 45
SHB 45
1,0 - 3,0
3,5 - 13,5
14,0 - 20,0
a.A. / PR
1,0 - 3,0
3,5 - 17,5
18,0 - 25,0
a.A. / PR
3,0 - 23,5
24,0 - 28,0
a.A. / PR
3,0 - 23,5
24,0 - 41,0
a.A. / PR
3,0 - 36,0
36,5 - 41,0
a.A. / PR
0,1
0,5
0,5
PR
0,1
0,5
0,5
PR
0,5
0,5
PR
0,5
0,5
PR
0,5
0,5
PR
steps clamping length
PR = per request
45° / 5°
45° / 5°
45° / 5°
45° / 5°
Custom solutions can be delivered for all draw-in collets-Hydromat.
All draw-in collets-Hydromat available in quick change version.
Edge Technologies I www.edgetechnologies.com1 8
ADJUSTABLE GUIDE BUSHINGS WITH CARBIDE INSERT
G d
L
D S
K
30
16
30
16
16
30
15
16
16
30
30
30
12
16
16
30
16
50
44
50
53
53
50
41,5
63
59
52
60
55
57,5
68
68
61
77
13
12,5
15
14,5
14,5
16
16
18
19,5
20
22
24
24
29
29
29,5
29
9
9
11
11
11
12
13
14
16
16
18
20
21
22
22
24
26
F 351
I 351
F 352
I 352
F 3001 / TD7
F 103
T 340
T 330
I 353
TD10
F 850
F 853
F 104
T 221
SNC15
I 354
F 391
TD20 R
F 605
0201
TD 26
0,8 - 5,5
0,8 - 5,6
1,0 - 7,5
1,0 - 7,0
1,0 - 7,0
1,0 - 7,5
1,0 - 8,0
1,0 - 9,0
1,0 - 10,5
3,0 - 10,0
3,0 - 6,0
1,0 - 12,0
1,0 - 13,0
4,0 - 13,0
3,0 - 8,0
2,0 - 13,0
3,0 - 15,0
4,0 - 12,0
3,0 - 8,0
2,0 - 15,0
4,0 - 13,0
3,0 - 10,0
3,0 - 18,0
4,0 - 14,0
3,0 - 12,0
2,0 - 17,0
4,0 - 15,0
3,0 - 12,0
2,0 - 20,0
4,0 - 16,0
3,0 - 13,0
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
1,0
1,0
0,1
0,1
1,0
1,0
0,1
0,5
1,0
1,0
0,5
1,0
1,0
0,5
1,0
1,0
0,5
1,0
1,0
0,5
1,0
1,0
M 8 x 0,6
M 8 x 0,75
M 10 x 0,6
M 10 x 0,8
M 10 x 0,75
M 12 x 1
M 12,5 x 0,75
M 13 x 0,75
M 14 x 1
M 16 x 1
M 16 x 1
M 20 x 1
M 18 x 1
M 19 x 1
M 22 x 1
M 24 x 1
M 25 x 1
part no. ø d (mm) ø D (mm) lenght L (mm) coneα (degree) clamping range (mm) increments (mm)thread G inside shape
>> Table to be continued
Custom solutions can be delivered for all guide bushings.
All guide bushings available with enlarged guide area and oversize.
Edge Technologies I www.edgetechnologies.com 1 9
ADJUSTABLE GUIDE BUSHINGS WITH CARBIDE INSERT
part no. ø d (mm) ø D (mm) length L (mm) coneα (degree) clamping range (mm) increments (mm)thread G inside shape
16
16
30
30
10
30
30
16
20
16
16
82
82
81
71
87,5
71
71
82
82
82
82
34
34
38
39
41
48
48
49
48
51
54
28
28
28
32
34
40
40
42
42
44
48
T 223
TD25 NS
TD 255
T 223
I 357
TD25
F 355
T 227
CD25
F 854
F 105
T 229
TD32 S
TD 32
ML 36
ST 38 / STM38
M 25 x 1
M 27 x 1
M 25 x 1
M 32 x 1
M 34 x 1
M 36 x 1
M 40 x 1
M 40 x 1
M 40 x 1
M 42 x 1
M 46 x 1
3,0 - 21,0
22,0
3,0 - 17,0
3,0 - 14,0
22,0
3,0 - 21,0
4,0 - 17,0
3,0 - 14,0
3,0 - 22,0
3,0 - 25,0
4,0 - 22,0
3,0 - 15,0
3,0 - 26,0
3,0 - 26,0
4 - 32,0
33,0
4,0 - 27,0
3,0 - 25,0
4,0 - 32,0
33,0
4,0 - 27,0
3,0 - 25,0
3,0 - 35,0
3,0 - 38,0
0,5
1,0
1,0
0,5
1,0
1,0
0,5
0,5
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
G d
L
D S
K
All guide bushings also availablewith BL-coating.
In S-Slot design. Guide bushing also in SB available.
Edge Technologies I www.edgetechnologies.com2 0
CAV - BAR FEED COLLETS
Z
P
SD
part no. Channel ø D (mm) ø Z (mm) clamping range (mm)
M6x1L
M6x1L
M6x1L
10
10
10
10
16
16
16
7
10
12
15
17
19
21
25
25/32
25/34
7
10
12
15
17
19
21
25
32
34
CAV 7
CAV 10
CAV 12
CAV 15
CAV 17
CAV 19
CAV21
CAV25
CAV32
CAV34
1,5 - 5,9
2,0 - 8,5
8,5 - 10,5
2,99 - 13,87
13,87 - 15,97
15,97 - 16,99
17 - 19
5,08 - 22,22
15,5 - 29,5
19 - 31
length L (mm)
40
40
40
55
55
55
55
76
76
76
4
4
4
6
6
6
8
8
8
8
8
8
BAR FEED COLLETS FOR BAR LOADERS
part no. Channel ø D (mm) ø P (mm) clamping range (mm) increments (mm)
M 4
M 5
M 4
7 H 7
M 5
8 H 7
8 H 7
11 H 7
11 H 7
11 H 7
14 H 7
14 H 7
14 H 7
14 H 7
20 H 7
20 H 7
5 / 5,5
7 / 7,5
7
10
10
12
13
15
16
18
20
21
22
23
25
28
D 5
D 7
D 7
D 10
D 10
D 12
D 13
D 15
D 16
D 18
D 20
D 21
D 22
D 23
D 25
D 28
200 E
208 E
Bechler
210 E
Bechler
212 E
213 E
203 E
SHK 16
218 E
225 E
SHK 21
SHK 22
SHK 23
222 E
227 E
1,0 - 1,4
1,5 - 4,5
1,0 - 1,4
1,5 - 5,9
6,0 - 6,2
PR
1,0 - 1,5
2,0 - 3,5
4,0 - 8,5
9,0 - 10,0
2,0 - 8,5
3,0 - 3,5
4,0 - 9,5
10,0 - 11,0
2,0 - 4,0
4,5 - 12,0
3,0 - 3,5
4,0 - 13,0
13,5 - 14,0
3,0 - 3,5
4,0 - 13,0
13,5 - 15,0
3,0 - 4,5
5,0 - 16,0
4,0 - 5,5
6,0 - 18,0
18,5 - 19,0
PR
PR
PR
4,0 - 5,5
6,0 - 23,0
23,5 - 24,0
3,0 - 7,5
8,0 - 25,0
25,5 - 26,5
0,1
0,1
0,1
0,1
0,1
PR
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
PR
PR
PR
0,5
0,5
0,5
0,5
1,0
0,5
length L (mm)
37
37
30
40
26
40
40
40
40
40
65
65
65
65
65
65
ø Z (mm)
>> Table to be continuedPR = per request
Edge Technologies I www.edgetechnologies.com 2 1
Z
P
SD
Edge Technologies I www.edgetechnologies.com2 2
BAR FEED COLLETS FOR BAR LOADERS
8
8
8
8
part no. Channel ø D (mm) ø P (mm) clamping range (mm) increments (mm)
20 H 7
20 H 7
20 H 7
20 H 7
SHK 30
SHK 32
SHK 34
SHK 36
6,0 - 9,5
10,0 - 25,5
26,0 - 28,0
6,0 - 9,5
10,0 - 28,5
29,0 - 30,0
10,0 - 32,0
8,0 - 9,5
10,0 - 30,0
30,5 - 33,0
4,0 - 10,0
4,5 - 10,5
11,0 - 24,0
11,5 - 21,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
1,0
1,0
1,0
1,0
length L (mm)
65
65
65
65
ø Z (mm)
D 30
D 32
D 34
D 36
30
32
34
36
Additional cost for bar feed collets from channel D 10 - D 36
Z
P
SD
TRAUB BAR FEED COLLETS
part no. channel ø D (mm) thread G lenght L (mm) clamping range (mm) increments (mm)
50
65
65
65
65
65
65
65
M 8 x 1
M 10 x 1
M 12 x 1
M 12 x 1
M 17 x 1
M 17 x 1
M 17 x 1
M 25 x 1,5
11
14
19
21
24
28
32
34
D 12
D 16
D 20
D 23
D 26
D 30
D 33
D 36
12 G
16 G
20 G
23 G
26 G
30 G
33 G
36 G
3,0 - 10,0
3,0 - 13,0
3,0 - 18,0
5,0 - 18,0
4,0 - 22,5
3,0 - 26,0
10,0 - 30,0
4,0 - 32,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
CUCCHI BAR FEED COLLETS
part no.
S
L
DG
ø D (mm) thread G length L (mm) clamping range (mm)
65
65
65
70
70
70
70
70
M 18 x 1,5 L
M 18 x 1,5 L
M 18 x 1,5 L
M 18 x 1,5 L
M 18 x 1,5 L
M 25 x 1,5 L
M 25 x 1,5 L
M 25 x 1,5
28
29
30
35
36
38
41
42
PB 28
PB 29
PB 30
PB 35
PB 36
PB 38
PB 41
PB 42
10,0 - 26,0
10,0 - 27,0
10,0 - 28,0
10,0 - 33,0
10,0 - 34,0
10,0 - 36,0
20,0 - 39,0
20,0 - 40,0
Edge Technologies I www.edgetechnologies.com 2 3
Z
P
SD
Edge Technologies I www.edgetechnologies.com2 4
BAR FEED COLLETS EDGE & IEMCA STYLE
part no. channel
D
L
S
G
ø D (mm) thread G length L (mm) clamping range (mm) increments (mm)
40
40
42
42
42
42
59
59
59
59
59
59
78
78
78
78
78
78
78
80
80
80
80
80
80
80
80
80
80
80
M 5 x 0,5
M 6 x 0,75
M 7 x 0,75
M 8 x 1
M 8 x 1
M 8 x 1
M 10 x 1
M 10 x 1
M 10 x 1
M 10 x 1
M 10 x 1
M 10 x 1
M 25 x 1,5
M 25 x 1,5
M 25 x 1,5
M 25 x 1,5
M 25 x 1,5
M 25 x 1,5
M 25 x 1,5
M 25 x 1,5
M 25 x 1,5
M 25 x 1,5
M 25 x 1,5
M 25 x 1,5
M 25 x 1,5
M 25 x 1,5
M 25 x 1,5
M 25 x 1,5
M 25 x 1,5
M 25 x 1,5
7,5
10
12
15
16
18
20
20
23
25
27
30
32
34
35
37
38
40
42
45
46
50
51
55
56
58
60
65
70
75
D 7,5
D 10
D 12
D 15
D 16
D 18
D 20
D 20
D 23
D 25
D 27
D 30
D 32
D 34
D 35
D 37
D 38
D 40
D 42
D 45
D 46
D 50
D 51
D 55
D 56
D 58
D 60
D 65
D 70
D 75
SE 7,5
SE 10
SE 12
SE 15
SE 16
SE 18
SE 20
SE 22
SE 23
SE 25
SE 27
SE 30
SE 32
SE 34
SE 35
SE 37
SE 38
SE 40
SE 42
SE 45
SE 46
SE 50
SE 51
SE 55
SE 56
SE 58
SE 60
SE 65
SE 70
SE 75
2,0 - 6,5
2,0 - 8,0
2,0 - 10,0
4,0 - 13,0
7,0 - 14,0
12,5 - 16,0
4,0 - 18,0
14,0 - 20,0
14,0 - 21,0
17,0 - 23,0
19,0 - 25,0
3,0 - 28,0
25,0 - 30,0
8,0 - 32,0
20,0 - 33,0
31,0 - 35,0
31,0 - 35,0
20,0 - 37,0
20,0 - 40,0
20,0 - 42,0
20,0 - 44,0
44,0 - 47,0
43,0 - 48,0
20,0 - 54,0
20,0 - 54,0
20,0 - 54,0
20,0 - 57,0
56,0 - 63,0
60,0 - 68,0
67,0 - 72,0
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
Edge Technologies I www.edgetechnologies.com 2 5
GUIDE SLEEVES FOR BAR LOADERS (VKK)
part no. ø D (mm)
DP
L
ø P (mm) length L (mm)
40
40
40
65
65 / 90
65 / 90
65 / 90
65 / 90
65 / 90
65 / 90
65 / 90
90
90
90
90
90
7 H 7
8 H 7
11 H 7
14 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
10,3
12,3
15,3
20,3
25,3
28,3
30,3
32,3
36,3
38,3
40,3
42,3
45,3
50,3
60,3
65,3
VKK 10
VKK 12
VKK 15
VKK 20
VKK 25
VKK 28
VKK 30
VKK 32
VKK 36
VKK 38
VKK 40
VKK 42
VKK 45
VKK 50
VKK 60
VKK 65
VKK 67 up to 100
Edge Technologies I www.edgetechnologies.com2 6
INSIDE CLAMPING SLEEVES SHK
L
Z
S DP
part no. ø D (mm) ø Z (mm) length L (mm) increments (mm)
4
4
6
6
8
8
8
SHKI 7
SHKI 10
SHKI 12
SHKI 15
SHKI 18
SHKI 20
SHKI 25
SHKI 28 up to SHKI 50
37
40
40
40
40
65
65
PR
1,0
1,0
1,0
1,0
1,0
1,0
1,0
PR
ø P (mm)
M 5
7
8
11
11
14
20
20
7
10
12
15
18
20
25
28 - 50
PR = per request
Inside clamping sleeves can also be delivered sealed.
Edge Technologies I www.edgetechnologies.com 2 7
FMB TURBO-BAR FEED COLLETS
part no. channel
D
S
L
P
ø D (mm) ø P (mm) clamping range (mm) increments (mm)
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
25
28
30
32
34
35
36
38
40
42
44
45
50
54
55
D 25
D 28
D 30
D 32
D 34
D 35
D 36
D 38
D 40
D 42
D 44
D 45
D 50
D 54
D 55
SHT 25
SHT 28
SHT 30
SHT 32
SHT 34
SHT 35
SHT 36
SHT 38
SHT 40
SHT 42
SHT 44
SHT 45
SHT 50
SHT 54
SHT 55
4,0 - 7,5
8,0 - 20,0
20,5 - 23,0
PR
PR
5,0 - 8,0
9,0 - 27,0
27,5 - 28,0
5,0 - 8,5
9,0 - 28,0
28,5 - 30,0
PR
PR
6,0 - 9,0
10,0 - 30,0
30,5 - 33,0
33,5 - 34,0
PR
10,0 - 36,0
36,5 - 38,0
6,0 - 10,0
11,0 - 39,0
39,5 - 40,0
40,5
PR
6,0 - 11,0
12,0 - 42,0
42,5 - 43,0
6,0 - 12,0
13,0 - 44,0
45,0 - 47,0
47,5 - 48,0
PR
PR
0,5
0,5
0,5
PR
PR
1,0
0,5
0,5
0,5
0,5
0,5
PR
PR
1,0
0,5
0,5
0,5
PR
1,0
PR
1,0
0,5
0,5
PR
1,0
1,0
0,5
1,0
1,0
1,0
0,5
PR
PR
length L (mm)
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
PR = per request
Edge Technologies I www.edgetechnologies.com2 8
FMB TURBO-BAR FEED COLLETS
part no. channel
D
S
L
P
ø D (mm) ø P (mm) clamping range (mm) increments (mm)
90
90
90
90
90
90
90
110
20 H 7
20 H 7
20 H 7
20 H 7
20 / 35 H 7
35 H 7
35 H 7
35 H 7
60
63
65
70
75
80
90
100
D 60
D 63
D 65
D 70
D 75
D 80
D 90
D 100
SHT 60
SHT 63
SHT 65
SHT 70
SHT 75
SHT 80
SHT 90
SHT 100
Additional cost for turbo-bar feed collets
10,0 - 15,0
16,0 - 55,0
56,0 - 57,0
58,0
PR
8,0 - 15,0
16,0 - 60,0
61,0 - 63,0
PR
PR
40,0 - 76,0
50,0 - 84,0
60,0 - 95,0
4,0 - 10,0
11,0 - 20,0
21,0 - 30,0
31,0 - 40,0
from 41,0
1,0
1,0
1,0
PR
1,0
1,0
1,0
PR
PR
1,0
1,0
1,0
1,0
1,0
1,0
1,0
PR
length L (mm)
Larger bore diameter also available in closed design.
PR = per request
It is recommended to use turbo-bar feed collets from size D 40 with a spring.
All turbo-bar feed collets can be delivered in XT-version for XT-bar loaders.
Sample collet with spring for reinforcement
INSIDE CLAMPING SLEEVES TURBO
DPS
L
Edge Technologies I www.edgetechnologies.com 2 9
part no. channel ø D (mm) ø P (mm) clamping range (mm) increments (mm)
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 H 7
20 / 35 H 7
35 H 7
35 H 7
35 H 7
25
28
30
32
34
35
36
38
40
42
44
45
50
54
58
60
63
65
70
75
80
90
100
D 25
D 28
D 30
D 32
D 34
D 35
D 36
D 38
D 40
D 42
D 44
D 45
D 50
D 54
D 58
D 60
D 63
D 65
D 70
D 75
D 80
D 90
D 100
SHTI 25
SHTI 28
SHTI 30
SHTI 32
SHTI 34
SHTI 35
SHTI 36
SHTI 38
SHTI 40
SHTI 42
SHTI 44
SHTI 45
SHTI 50
SHTI 54
SHTI 58
SHTI 60
SHTI 63
SHTI 65
SHTI 70
SHTI 75
SHTI 80
SHTI 90
SHTI 100
10,0 - 20,0
21,0 - 23,0
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
1,0
1,0
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
length L (mm)
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
110
PR = per request
Inside clamping sleeves turbo can be delivered sealed.
ROTATING INSERTS FOR BAR LOADERS
P
Z
D
B
L
Edge Technologies I www.edgetechnologies.com3 0
part no. manufacturer ø D (mm) ø B (mm) ø P (mm) entire length (mm)
8
8
8
12
12
17
17
20
20
20
20
10,5
12,5
13,5
15
18
20
22
25
30
32
36
FMB, Iemca, Irco
FMB, Iemca, Irco
FMB, Iemca, Irco
FMB, Iemca, Irco, Traub
FMB, Iemca, Irco, Traub
FMB, Iemca, Irco, Traub
FMB, Iemca, Irco, Traub
FMB, Iemca, Irco, Traub
FMB, Iemca, Irco, Traub
FMB, Iemca, Irco, Traub
FMB, Iemca, Irco, Traub
D 10
D 12
D 13
D 15
D 18
D 20
D 22
D 25
D 30
D 32
D 36
7
8
8
11
11
14
14
20
20
20
20
100
100
100
100
100
116
116
119
119
119
119
ø Z (mm)
4
4
4
6
6
8
8
8
8
8
8
ROTATING INSERTS FOR BAR LOADERS
P B
L
Z
D
part no. manufacturer ø D (mm) ø B (mm) ø Z (mm) entire length (mm)
9
11
10,5
12,5
Traub
Traub
D 10
D 12
4
4
88
88
ø P (mm)
7
8
Edge Technologies I www.edgetechnologies.com 3 1
ROTATING INSERTS FOR BAR LOADERS
G
L
D d
part no. manufacturer ø D (mm) threat G entire length (mm)
M 4
M 5
5,5
7,5
FMB, Traub
FMB, Traub
D 5
D 7
75
82
ø d (mm)
4,5
6,4
ROTATING INSERTS FOR BAR LOADERS EDGE STYLE
G1 G2
L
D
part no. manufacturer ø D (mm) thread G 1 entire length (mm)
M 45,5IemcaD 5 90
thread G 2
M 4
ROTATING INSERTS IEMCA BAR LOADERS FOR SCHLENKER SYSTEM
part no. manufacturer
M5
139
7,5
M6x
0,75
entire length (mm)ø D (mm)
D 7 Iemca - Schlenker adapter 7,5 139
Edge Technologies I www.edgetechnologies.com3 2
ROTATING INSERTS FOR BAR LOADERS
G1 G2
L
D
part no. manufacturer ø D (mm) thread G 1 entire length (mm)
M 3
M 4
M 4
M 5
M 6
M 6
5,5
7
7,5
8,5
10,5
13,5
Tornos
Tornos
Tornos
Tornos
Tornos
Tornos
ERT 0550
ERT 0700
ERT 0750
ERT 0850
ERT 1050
ERT 1350
54
47
47
47
52
72
thread G 2
M 3
M 5
M 5
M 5
M 6
M 6
ROTATING INSERTS FOR BAR LOADERS
M 5
M 6
7
12
LNS / Tryton
LNS / Tryton
7 TR
12 TR
63
72
M 4
M 6
ROTATING INSERTS FOR BAR LOADERS
M 5
M 5
M 5
7
10
10
Bechler
Bechler
Bechler
7 B
10 B (A)
10 B (B)
84
84
96
M 5
M 5
M 5
part no. manufacturer ø D (mm) thread G 1 entire length (mm)thread G 2
part no. manufacturer ø D (mm) thread G 1 entire length (mm)thread G 2
Edge Technologies I www.edgetechnologies.com 3 3
FMB TURBO ROTATING INSERTS
part no. ø P (mm)
L
P
D
B
ø D (mm) ø B (mm)
20
25
25
30
30
30
33
33
33
33
42
42
42
51
51
51
51
51
65
65
65
82
25
30
32
34
36
38
40
42
44
45
50
54
55
58
60
63
65
70
75
80
90
100
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20 / 35
35
35
35
D 25
D 30
D 32
D 34
D 36
D 38
D 40
D 42
D 44
D 45
D 50
D 54
D 55
D 58
D 60
D 63
D 65
D 70
D 75
D 80
D 90
D 100
entirw length (mm)
196
196
196
196
196
196
206
206
206
206
206
206
206
231
231
231
231
231
231
231
231
231
Edge Technologies
11600 Adie RoadMaryland Heights, MO 63043Phone: (314) 692-8388Fax: (314) 692-5152
www.edgetechnologies.com
