CompactCom E

7/27/2019 CompactCom E

http://slidepdf.com/reader/full/compactcom-e 1/4

CompactCom

Compact Plug-in interfaces - the next

generation product for embedded industrial

commuication

► Profibus

► DeviceNet► CANopen► Profinet-IO► EtherNet/IP► Modbus-TCP► PowerLink ► CC-Link ► Modbus-RTU► RS232► RS485►

USB► Wireless

ANYBUS EMBEDDED PRODUCTS



ANYBUS COMPACTCOM

Active and Passive

modules provide a

complete communication

solution.

The growing use and fragmentation of Industrial Ethernet and Fieldbus communicationmakes it even more difficult to decide whichnetworks to support when you release a new product. Is only Profibus enough for you or doyou need to support several fieldbuses? What

about Ethernet, which industrial versions willbe the right choice? Should you have USB orRS232? Will your customers ask for wireless like WiFi or Bluetooth? Is there any new technology coming up?

Where do you intend to sell your product, whichnetworks are used in different countries anddifferent industries? What about conformanceand certification? There are many factors that need be consideredbefore selecting the right communicationinterface for your product. With Anybus-CC youhave full flexibility and can choose from a widerange of connectivity solutions for your product.

Gone are the days of a long and complex in-design for network connectivity. The flexibility

of the Anybus-CC is unrivaled. You canchoose from modules supporting Fieldbusnetworks, any Ethernet protocol, USB, Wirelessor even a Serial interface without having tomake any hardware or software changes to yourproduct. With fewer requirements to size, cost,

interface methods and performance, the Anybus-CC reaches an even wider target marketfor automation devices.

It can easily be integrated into traditional devicessuch as PLC’s, Drives, Robot Controllers, WeighScales, HMI’s, but thanks to its small size isnow also ideal for Valve Manifolds, Motion and Temperature Controllers, Sensors, I/O Blocksand Bar Code Readers, just to name a few

applications.

Anybus Compact-Com, (Anybus-CC), has been designed to meet modern network

connectivity requirements, featuring low price, small size and an easy integration

process. At the same time, Anybus-CC provides the performance and functionality

required to meet the communication demands of HMI’s, robot controllers,drives, valve blocks, instruments, scales and many more industrial products.

The Anybus-CC module uses the CompactFlash ® form factor and connector. The

module is completely covered by a robust plastic housing, which enables easy

handling and installation at any time in the logistic chain between manufacturer

and end customer.

Innovative design and

functionality - providing

optimal flexibility.

With its unique CompactFlash® connection the Anybus-CC

simply plugs into the host application.

There are two versions of Anybus-CC modulesavailable.

Active Modules: Handles the full protocolstack up to Layer 7, suitable for networks such asProfibus, EtherNet/IP or CC-Link. Allnecessary software and hardware is included onthe active Anybus- CC modules and they can beinterfaced through an asynchronousserial interface or via a parallel interface. Bothinterface alternatives support the same data

exchange methods, functionality and features.

● 8-bit 2kB Dual Port Ram Parallel Interface

● Asynchronous half duplex SCI Serial Interface

Passive Modules: Handles basic

communications tasks such as converting serial telegrams to any supported network. It issuitable for USB, Bluetooth or as an EthernetSerial Server.

● Passive SCI Serial Interface (Transparent pass-through)

Link Module: The Link Module conceptconsists of an active Anybus-CC moduleconnected to an external converter that enablescommunication on the selected network. This

is a way to use the Anybus-CC concept alsofor legacy networks such as Modbus Plus orInterbus.

ANYBUS EMBEDDE D PRODUCTS

Designed to meet modern network connectivity require-

ments, featuring low price, small size and easy integration.

Take a closer look at Anybus CompactCom!

The Active & Passive family featuring Fieldbus, Ethernet, Serial,USB and Wireless modules.

Anybus Communicator as

as the external converter Active Anybus-CC

Link module

RS-232



Available for:

Profibus

DeviceNet

CANopen

Profinet-IO

EtherNet/IP

Modbus-TCP

PowerLink

CC-Link

Modbus-RTU/ASCII

RS-232

RS-485

USB Wireless

C O M P A C T - C O M

Ideal applications for ABCC integration

LED indicators

Standard 50-pin CompactFlash connector

On-board DC/DC,

opto couplers and

physical layer

● Cost optimized communication

modules for nearly all industrial

applications

● Supports all major Fieldbus

Networks, Industrial Ethernet

Protocols, RS232, RS485, USB

and Wireless

● Plug-in CompactFlash® connection

to host product

● Robust housing for easy handling

and optimised logistics

● Low power consumption

● Very small and compact size

● All network hardware and software

are integrated in the module

● On-board high performance RISC

network microprocessor

● Parallel Dual Port Ram interface for

maximum performance and data

throughput

● Serial asynchronous interface with

configurable baudrates

● Starterkit available including driver

software and demo application

● Size: 52 x 50 x 22mm (L x W x H)

2.04 x 1.97 x 0.86” (L x W x H)

● Integrated PE (Protected Earth)

protection

● Power Supply: 3.3V

● Temp: Operating 0°C to + 70°C

Non-Oper. -40°C to + 85°C

● EMC Compliance: CE Marked

● UL&cUL Compliance: Pending

● RoHS conformance

● Tested and verified for Fieldbus

and Network conformance

KEY FEATURES

TECHNICAL SPECIFICATION

Measuring Devices

RISC network

processor plaform

3.3V design

Standard network specific front and connectors

PE-connection integrated

with module fastening

The module fastening is handled by

the module mehanics; no additional

mounting screws are required.

The only thing that needs to be

considered is the fastening holes in

the PCB. The PE (Protected earth)

connection is made on module

insertion, via a metallic clip at the

bottom of the module.

1.6mm PCB

Locking mechanism

Robust frame cover

with integrated

fastening

ABCC slides onto the PCB

The screw is tightened and the

ABCC is locked into position

Motion Controllers

Valve Manifolds

PLC’s

Drives and Micro Drives

HMI’s



Network specific supported features - Anybus CompactCom

Profibus-DPV1-AB6200 DeviceNet - AB6201 CANopen - AB6202 Profinet-IO - AB6206 Modbus-TCP- AB6204

• Up to 400 bytes of I/O data

• Optional User Parameter Data

support

• Set_Slave_Add support

• ADI access via DPV1 read/

write services

• Device identity customization• Automatic baud rate detection

• Generic and Profibus specific

diagnostic support

• Galvanically isolated bus

electronics

• Generic GSD-file provided

• CIP Parameter Object Support

• Explicit messaging

• Baud rate: 125-500 kbit/s

• UCMM capable

• Bit-strobed I/O

• Change-of-state / Cyclic I/O /

Polled I/O

• Expansion possibilities via CIP

forwarding

• Customizable identity object

• Automatic baud rate detection


electronics

• Supports all standard baud rates

• Automatic baud rate detection

• Supports LSS

• Customizable Identity

Information

• Up to 32 TPDO’s & 32 RPDO’s

(Corresponds to a total of 256bytes of Process Data)

• Up to 16383 ADI’s can be

accessed from the network as

Manufacturer Specific Objects.

• Diagnostic support


electronics

• Profinet Real-time functions

• Baud rate: 100Mbit/s

• Max 256/256 bytes of process

data IN/OUT

• Support for acyclic record data

• Generic GSD-file provided

• Transformer isolated Ethernet

interface

• Available 2006

• IP-address settings configurable

through application interface,

webpage, DHCP or via HMS

config tool

• Baud rate: 10/100 Mbits/s

• Modbus TCP Class0, class1 &

partial class2 slave functionality

• Transformer isolated Ethernet

interface

• Available Q1 2006

EtherNet/IP-AB6205 PowerLink-AB6210 CC-Link - AB6211 Modbus-RTU-AB6203 RS-232 - AB6207

• IP-address settings configurable

through application interface,

webpage, DHCP or via HMS

config tool

• Baud rate: 10/100 Mbits/s

• EtherNet/IP adapter

• Transformer isolated Ethernetinterface

• Generic EDS-file provided


• Protocol compliant to IAONA

Real-time classes 3+4

• Address settings configurable

through application interface and

Ethernet services

• Baud rate: 100 Mbits/s

• Transformer isolated Ethernetinterface

• Available 2006

• Total 128 I/O points (bit) and

32 words

• Number of occupied stations: 1-4

• Support profiles for a “Remote

Device”

• Baud rate: 156kbit/s, 625kbit/s,

2,5Mbit/s, 5Mbit/s, 10Mbit/s• Galvanically isolated bus

electronics

• Available 2006

• Modbus RTU slave functionality

with RS232/485 on the fieldbus

side

• Max 256 byte input and 256 byte

output process data

• Optically isolated interface

• Baud rate: 1,2 Kbit/s - 115,2Kbit/s

• Support for Class0, Class1 &

partially Class2 slave

functionality

• Supports both RTU and ASCII


• Physical layer converter for the

RS-232 communication standard

• Supports any baud rate up to

250 Kbps

• No configuration necessary,

since the module acts only on

the physical layer.

RS-485 - AB6208 USB - AB6209 Wireless Starterkit

• Physical layer converter for the

RS-422 or RS-485

communication standard


10 Mbit

• No configuration necessary,

since the module acts only on

the physical layer.


• Physical layer converter for

USB communication standard

(USB 1.1 & USB 2.0 full speed)


3 Mbit

• The baud rate is set from the

host computer side

• Software drivers supported


• Physical layer converter for

wireless communication

standards

• Support standard baud rates and

specific profiles

• Available 2006

The StarterKit provides a quick

and simple way to test the Anybus

CompactCom

A serial hardware adapter for

connection to PC (The adapter

can be used for test setup in PC

environment and for softwaredownload to the CompactCom

Also Included:

• Anybus CompactCom module

1-2 pieces (for selected

fieldbus or passive modules)

• Application connectors

• Anybus CompactCom

mechanical drawings and

manuals

• Anybus CompactCom

application driver software

HMS INDUSTRIAL NETWORKS ABPilefeltsgatan 93-95

SE 302 50, Halmstad

Sweden

Tel: +46 35 17 29 00

Fax: + 46 35 17 29 09Email: [email protected]

HMS INDUSTRIAL NETWORKS INC1925 N.Clybourn, Suite 300

Chicago, IL 60614

USA

Tel: +1 773 404 3486

Fax: +1 773 404 1797Email: [email protected]

HMS INDUSTRIAL NETWORKS GMBHHaid-und-Neu Str. 7

DE 76131, Karlsruhe

Germany

Tel: +49 721 96472-0

Fax: + 49 721 96472-10Email: [email protected]

HMS INDUSTRIAL NETWORKSNara Building II 9F, 2-2-8 Shin Yokohama,

Kohoku-ku, Yokohama-shi, Kanagawa-ken

223-0033, Japan

Tel: +81 45 478 5340

Fax: +81 45 476 0315Email: [email protected]

HMS INDUSTRIAL NETWORKSC/O EFA Automazione s.r.l.

Via S. Aleramo 2, I-20063

Cernusco S/N, Milan, Italy

Tel: +39 0292 113180

Fax: +39 0292 113164Email: [email protected]

www.anybus.com

Anybus® is a registered trademark of HMS Industrial Networks AB, Sweden, USA, Germany and other

countries. Other marks and words belong to their respective companies. All other product or service names

mentioned in this document are trademarks of their respective companies.

Part No: MM0001 Version 1 03/2005 - © HMS Industrial Networks - All rights reserved

Documents

CompactCom E