Truck Series

Compressor/Vacuum PumpsFor Liquid Waste Tankers

Utile compressor-vacuum pumps are proven performers in the field, benefiting from: -

• Excellent reliability and performance

• Low noise level

• Superior innovative design

• Low maintenance costs

MODEL MAXIMUM MAXIMUM MAXIMUM DISPLACEMENT VACUUM PRESSURE COOLING m3/hr (cfm) mm Hg (ins Hg) bar g (psig) LA215 475 (280) 635 (25) 1.75 (25) AIRL320 830 (489) 686 (27) 1.75 (25) FANLW402 478 (282) 711 (28) 1.75 (25) AIRLW625 623 (367) 711 (28) 1.75 (25) FANLW825 908 (535) 711 (28) 1.75 (25) FANLF450 & 450BSE 898 (529) 559 (22) 1.40 (20) AIRMD220 - 920 534 (905) 724 (28.5) 2.75 (40) WATER

Vacuum Pump:Liquid Waste Tanker

LF450

These aircooled exhausters have been designed for the medium size tanker or gully emptier, and are equipped with our ballast air injection system to ensure cool vacuum operation.

LA215 L320

A high displacement aircooled vacuum pump with a double shaft extension and ballast cooling for continuous operation up to 22”Hg.The LF450BSE version, is fitted with a mechanical oil pump and auxiliary oil reservoir

MODEL LF450MIN/MAX SPEED - rpm 900 1100

DISPLACEMENT - m3/hr (cfm) 733 898

(432) (529)

CAPACITY - m3/hr at 381mm Hg 645 788 (cfm at 15”Hg) (380) (464)

MAX VACUUM - mm Hg (“Hg) 559 (22)

kW (hp) at MAX VACUUM 13.8 16.9

(18.5) (22.6)kW at 0.5 Bar G. 14.1 21.6(hp at 7.5 P.S.I.G.) (24.0) (29.0)WEIGHT - kgs (lbs.) 210 (462)

LF450 LF450BSE

The LA215 is suitable for operation up to 25”Hg. The fancooled L320 will work at a constant 27”Hg. A mechanical oil pump to give a constant feed rate under all operating conditions is fitted to the LA215 and L320. Alternative versions of these pumps have suction oiling

MODEL LA215 L320MIN/MAX SPEED - rpm 900 1300 900 1100DISPLACEMENT - m3/hr (cfm) 329 475 679 830 (194) (280) (400) (489) CAPACITY - m3/hr at 381mm Hg 272 399 584 725 (cfm at 15”Hg) (160) (235) (344) (427)

MAX VACUUM - mm Hg (“Hg) 635 (25) 686 (27)kW (hp) at MAX VACUUM 8.2 11.2 14.9 18.6 (11.0) (15.0) (20.0) (25.0)

kW at 0.5 Bar G. 6.4 9.3 17.2 20.8 (hp at 7.5 P.S.I.G.) (8.5) (12.5) (23.0) (28.0)

WEIGHT - kgs (lbs.) 120 (264) 220 (484)

LA215 & L320

L320

LF450BSE

OUTLETINLET

700

344

200

150

136

150

DIA

29.9

9730

.011

75

200230

388

150

173

220

2 1/2" BSP2 1/2" BSP

OUTLETINLET

790

35.0

18D

IA.

3" B.S.P. 3" B.S.P.

286

303

270

176

35.0

02

76

245

485

198

273

318

198

379

INLET

696

348

DIA

.34

.90

34.9

2

69

175

303

270

318

273

380

198

198

283245

3" BSP 3" BSPOUTLET

69

348

718

348

69

303

270

433

575

175

34.9

2 D

IA.

34.9

0

318

273

198

198

245 283

3" BSPOUTLETINLET

3" BSP

LW402 - 825

MD220-920

Heavy-duty aircooled vacuum pumps incorporating our patented high flow ballast air injection system, enabling continuous running with a closed inlet at 27/28” Hg.

Optional pneumatic operation of the 4 way valve which has a built in non-return valve as standard. The LW625/825 are fancooled and have the lubrication pump mounted inside the large capacity oil reservoir. Additional foot pads for side mounting

LW402

MODEL LW402 LW625 LW825 MIN/MAX SPEED - rpm 900 1300 850 1100 850 1100 DISPLACEMENT - m3/hr (cfm)

332 478 534 690 700 907 (196) (282) (315) (407) (413) (535)

CAPACITY - m3/hr at 381mm Hg 283 429 450 590 637 854 (cfm at 15”Hg) (167) (253) (266) (348) (376) (504)

MAX VACUUM - mm Hg (“Hg) 711 (28) 711 (28) 711 (28)

kW (hp) at MAX VACUUM 8.0 13.1 4.4 16.7 18.0 23.5

(10.7) (17.5) (19.3) (22.4) (24.1) (31.5)

kW at 0.5 Bar G. 7.1 11.5 9.5 22.4 15.1 22.0 (hp at 7.5 P.S.I.G.) (9.4) (15.4) (12.7) (20.7) (20.2) (29.5)

WEIGHT - kgs (lbs.) 140 (308) 230 (506) 265 (583)

LW625-825

This range of four MD watercooled machines is designed for continuous running at higher duties than the aircooled L range, and is suitable for large tankers or gully evacuators.

The lubrication system is by means of a mechanical oil pump giving a metered flow to the bearings and cylinder. The lubricator is direct mounted at the rear of the machine.

MD220-270 MD630-920

MODEL MD220 MD270 MD630 MD920

MIN/MAX SPEED - rpm 800 1375 800 1375 750 950 750 950

DISPLACEMENT - m3/hr (cfm) 310 539 381 656 834 1056 1210 1534

(183) (275) (225) (338) (492) (623) (714) (905)

CAPACITY - m3/hr at 381mm Hg 261 442 325 576 695 895 1012 1322 (cfm at 15”Hg) (154) (230) (192) (295) (410) (528) (597) (780)

MAX VACUUM - mm Hg (“Hg) 724 (28.5) 724 (28.5) 724 (28.5) 724 (28.5)

kW (hp) at MAX VACUUM 5.3 11.6 8.7 12.6 13.5 16.5 19.4 24.0

(7.0) (15.5) (11.6) (16.8) (18.1) (22.1) (26.1) (32.2)

kW at 0.5 Bar G. 8.1 13.3 10.0 16.5 16.5 23.8 28.8 36.2 (hp at 7.5 P.S.I.G.) (10.8) (17.8) (13.3) (22.1) (22.1) (31.9) (38.5) (48.5) WEIGHT - kgs (lbs.) 194 (427) 187 (411) 260 (572) 370 (814)

Dim A BLW625 344 750LW825 395 852

MD920

LW402

DIM MD220 MD270 A 215 212

DIM A B C D EMD630 228 430 830 920 92MD920 343 545 1060 1150 74

INLET3" TABLE 'D'

305

254

279

216

389

219

168

219

822

422

95

'A'

35.0

0 D

IA.

35.0

2

168

3" TABLE DOUTLET

OUTLET INLETE

405A

45.0

18

D

C

B

A 405

90

219

171

146

230

146

244

483

230230

230

45.0

02 D

IA

125 PN16 125 PN16

75

690

149

29.9

97 D

IA

300

250 150

200

321

499

176

200

150

127127345

2 1/2" BSPOUTLET

30.0

10

INLET/

4" B.S.P.OUTLET

250

300

211

38.0

18

121

A

140 140

B

188 201

570

442

200

250

200

250

38.0

02 D

IA

INLET/

0 1000 2000 3000 4000 5000 6000

0

10

20

30

40

50

TIM

E - M

INUT

ES

90% VACUUM

80% VACUUM

60% VACUUM

TANK CAPACITY50 10 15 20 25

GALLONS

CUBIC METRES

Approximate Evacuation Times

The Utile Engineering Co. Ltd. Irthlingborough, Northamptonshire. NN9 5UG. EnglandTel: +44 (0)1933 650216 Fax: +44 (0)1933 652738 E-mail: sales@utileengineering.com www.utileengineering.com

Whilst the details contained in this leaflet are representative of the machines, the actual products may differ from the illustrations due to improvements in design. Certified copies and performance curves will be supplied on request.

All dimensions in millimetres unless stated.

Imperial Example:

Evacuate a 3500 gallon vessel to 90% vacuum using the MD630 at 750 RPM.

MD630 displacement at 750 RPM is 492 cfm

Curve reading is 25 minutes

Actual Evacuation Time

= 25 x 100

492

= 5.1 minutes

Metric Example:

Evacuate a 20 cubic metre vessel to 90% vacuum using the MD630 at 750 RPM.

MD630 displacement at 750 RPM is 834 m3/hr

Curve reading is 31 minutes

Actual Evacuation Time

= 31 x 170

834

= 6.3 minutes

Imperial:To obtain actual evacuation time multiply result from curve by: - 100 pump displacement (cfm)

Metric:To obtain actual evacuation time multiply result from curve by: - 170 pump displacement (m3/hr)