Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 1

Internetworking

Chapter 2

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 3

Agenda

Internetworking Basics Internetworking Model The OSI Reference Model Ethernet Networking Wireless Networking Data Encapsulation

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 4

Possible causes of LAN traffic congestion are

Too many hosts in a broadcast domain Broadcast storms Multicasting Low bandwidth Adding hubs for connectivity to the network A large amount of ARP or IPX traffic (IPX is a No

vell

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 5

Network Segmentation

Collision domain Broadcast domain

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 6

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 7

Two advantages of using routers in your network are They don’t forward broadcasts by default. They can filter the network based on layer

3 (Network layer) information (i.e., IP address).

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 8

Four router functions in your network can be listed as

Packet switching Packet filtering Internetwork communication Path selection

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 9

Internetworking Model

The Layered Approach Advantages of Reference Models

It divides the network communication process into smaller and simpler components, thus aiding component development, design, and troubleshooting.

It allows multiple-vendor development through standardization of network components.

It encourages industry standardization by defining what functions occur at each layer of the model.

It allows various types of network hardware and software to communicate.

It prevents changes in one layer from affecting other layers, so it does not hamper development.

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 10

The OSI Reference Model

The upper layers

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 11

The lower layers

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 12

Layer functions

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 13

Application Layer

The Application layer of the OSI model marks the spot where users actually communicate to the computer.

Sample -> World Wide Web (WWW) E-mail gateways Electronic data interchange (EDI) Special interest bulletin boards Internet navigation utilities Financial transaction services13

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 14

The Presentation Layer

It presents data to the Application layer and is responsible for data translation and code formatting.

This layer is essentially a translator and provides coding and conversion functions. A successful data-transfer technique is to adapt the data into a standard format before transmission.

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 15

The Session Layer

The Session layer is responsible for setting up, managing, and then tearing down sessions between Presentation layer entities.

This layer also provides dialogue control between devices, or nodes. It coordinates communication between systems, and serves to organize their communication by offering three different modes: simplex, half duplex, and full duplex.

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 16

The Transport Layer

The Transport layer segments and reassembles data into a data stream.

Services located in the Transport layer both segment and reassemble data from upper-layer applications and unite it onto the same data stream.

They provide end-to-end data transport services and can establish a logical connection between the sending host and destination host on an internetwork.

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 17

The Transport layer is responsible for providing mechanisms for multiplexing upper-layer applications, establishing sessions, and tearing down virtual circuits.

The Transport layer can be connectionless or connection-oriented.

Some of you are probably familiar with TCP and UDP already.

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 18

Flow Control

Data integrity is ensured at the Transport layer by maintaining flow control and by allowing users to request reliable data transport between systems. The segments delivered are acknowledged back to th

e sender upon their reception. Any segments not acknowledged are retransmitted. Segments are sequenced back into their proper order

upon arrival at their destination. A manageable data flow is maintained in order to avoi

d congestion, overloading, and data loss.

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 19

Connection-Oriented Communication

a call setup, or a three way handshake

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 20

Transmitting segments with flow control

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 21

Windowing

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 22

Acknowledgments

It guarantees that the data won’t be duplicated or lost.

This is achieved through something called positive acknowledgment with retransmission a technique that requires a receiving machine to communicate with the transmitting source by sending an acknowledgment message back to the sender when it receives data.

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 23

Transport layer reliable delivery

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 24

The Network Layer

The Network layer (also called layer 3) manages device addressing, tracks the location of devices on the network, and determines the best way to move data, which means that the Network layer must transport traffic between devices that aren’t locally attached.

Two types of packets are used at the Network layer: Data packets : routed protocolrouted protocol Route update packets : routing protocolrouting protocol

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 25

Routing table used in a router

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 26

Here are some points about routers that you should really commit to memory:

Routers, by default, will not forward any broadcast or multicast packets.

Routers use the logical address in a Network layer header to determine the next hop router to forward the packet to.

Routers can use access lists, created by an administrator, to control security on the types of packets that are allowed to enter or exit an interface.

Routers can provide layer 2 bridging functions if needed and can simultaneously route through the same interface.

Layer 3 devices (routers in this case) provide connections between virtual LANs (VLANs).

Routers can provide quality of service (QoS) for specific types of network traffic.

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 27

The Data Link Layer

The Data Link layer provides the physical transmission of the data and handles error notification, network topology, and flow control.

The Data Link layer formats the message into pieces, each called a data frame, and adds a customized header containing the hardware destination and source address.

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 28

Data Link layer with the Ethernet and IEEE specifications.

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 29

The IEEE Ethernet Data Link layer has two sublayers: Media Access Control (MAC) 802.3 Defines

how packets are placed on the media. Contention media access is “first come/first served” access where everyone shares the same bandwidth—hence the name. Physical addressing is defined here,

Logical Link Control (LLC) 802.2 Responsible for identifying Network layer protocols and then encapsulating them.

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 30

Switches and Bridges at the Data Link Layer

Layer 2 switching is considered hardware-based bridging because it uses specialized hardware called an application-specific integrated circuit (ASIC).

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 31

The Physical Layer

we find that the Physical layer does two things: It sends bits and receives bits. Bits come only in values of 1 or 0—a Morse code with numerical values.

The Physical layer specifies the electrical, mechanical, procedural, and functional requirements for activating, maintaining, and deactivating a physical link between end systems.

This layer is also where you identify the interface between the data terminal equipment (DTE) and the data communication equipment (DCE).

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 32

Hubs at the Physical Layer

A hub is really a multiple-port repeater. A repeater receives a digital signal and reamplifies or regenerates that signal, and then forwards the digital signal out all active ports without looking at any data.

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 33

Ethernet Networking

Lecture 2-2

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 34

The success of Ethernet is due to the following factors: Simplicity and ease of maintenance Ability to incorporate new technologies Reliability Low cost of installation and upgrade

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 35

802.3 Ethernet in Relation to The OSI Model

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 36

IEEE 802.x Standards

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 37

Ethernet Technologies Mapped to the OSI model

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 38

Ethernet Addressing

We get into how Ethernet addressing works. It uses the Media Access Control (MAC) address burned into each and every Ethernet Network Interface Card (NIC).

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 39

MAC Address Format

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 40

Generic Frame Format

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 41

IEEE 802.3

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 42

Ethernet II Frame Format

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 43

Ethernet II and IEEE 802.3 Frame Format

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 44

Media Access Control (MAC)

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 45

MAC Rules and Collision Detection/Backoff

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 46

MAC Rules and Collision Detection/Backoff

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 47

Ethernet Timing

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 48

Interframe Spacing

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 49

Backoff

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 50

Error Handling

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 51

Types of Collisions

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 52

The effects of having a CSMA/CD network sustaining heavy collisions include

Delay Low throughput Congestion

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 53

Ethernet Errors

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 54

Ethernet Errors

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 55

FCS Errors

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 56

Parameters for 10 Mbps Ethernet Operation

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 57

Manchester Encoding Examples

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 58

Parameters for 100-Mbps Ethernet Operation

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 59

MLT-3 Encoding Example (100Base-TX)

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 60

NRZI Encoding Examples (100Base-FX)

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 61

Parameters for Gigabit Ethernet Operation

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 62

Actual 1000Base-T Signal Transmission

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 63

Gigabit Ethernet Layers

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 64

Gigabit Ethernet Media Comparison

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 65

Parameters for 10-Gbps Ethernet Operation

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 66

10GBASE LX-4 Signal Multiplexing

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 67

Wireless Networking

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 68

Benefits of WLANs

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 69

Evolution of Wireless LANs

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 70

Unlicensed Frequency Bands

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 71

Wireless Technologies

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 72

Distance Versus Speed

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 73

Wireless Technologies

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 74

In-Building WLANs

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 75

The IEEE 802 Standards

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 76

IEEE 802.11 Protocols

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 77

IEEE 802.11 Standards

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 78

Data Encapsulation

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 79

Data Encapsulation

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 80

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 81

Computer Network by P.It-arun Computer Engineering Dept, RMUTT. 82

Summary

OSI model—the seven-layer model used to help application developers design applications that can run on any type of system or network. Each layer has its special jobs and select responsibilities within the model to ensure that solid, effective communications do, in fact, occur.

Remember that hubs are Physical layer devices and repeat the digital signal to all segments except the one it was received from.

Switches segment the network using hardware addresses and break up collision domains.

Routers break up broadcast domains (and collision domains) and use logical addressing to send packets through an internetwork.