Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
CONDOR CLASSIC Design pressure up to 21 bar
Steam production from 1.500 to 15.000 Kg/h
STEAM
FIRE TUBE
INDUSTRIAL BOILER ITALY S.R.L.
Offices and Production Unit: Via E. Fermi, 64/66 - 24050 GRASSOBBIO (BG)
Cod. Fisc. / P.IVA 04024170161 REA: BG-428870
www.industrialboileritaly.com - [email protected]
Tel: +39 035 0521398 Fax: +39 035 0521 443
Standardkessel’s Condor Classic steam boiler is a pressurized boiler, three pass design with a completely wet back.
It has been especially designed for the combustion of both liquid and gaseous fuels and it is supplied with the all accessories according to the currently norms for an automatic functioning.
The Condor Classic fascinates for its simplicity and the maintenance does not request any dismounting.
The steam boiler has been designed according to the most advanced techniques by highly qualified personnel in our factory.
The tube plates are manually drilled at cold in order to maintain physical characteristics of the material.
The construction is performed according to the European directive P.E.D. 97/23/CE with calculations code VSG rev. ‘95.
All joints are accurately electric welded and are executed with manual/automatic process. Those weldings are also certified EN288/3.
Description More over, the following non destructive controls are made with presence of a certified inspector:
Ultrasonic test on the combustion chamber inspection hole
X-rays on the crosses and weldings
Penetrant liquid on the corner weldings
The exchange area is particularly vast in order to maintain low specific thermal loads and high efficiency even during high rate continuously.
The particular position of the smoke tubes around the fire room ensures a fair distribution of the smokes.
The smoke tubes are internally smooth and free from any loose turbulator to facilitate easy maintenance ensuring also a constant high speed which avoids the soot residues, involving thus a constant efficiency.
The steam boiler Condor Classic has been famous for over 40 years for its strong construction and long working life.
Condor Classic are particular for:
Oversized and totally wet exchange surface
Low thermical load
No turbulators
Manual drilling on the smoke tube plates to maintain the physical characteristics
Hole reaming on the smoke tube plates
Expanding smoke tubes
Perfect adaptability for the liquid and gaseous fuels
High and constant thermal efficiency
Easy maintenance.
STEAM
CONDOR CLASSIC
Boiler versions
STANDARD VERSION
Steam boiler Condor Classic in standard version with 3 pass design.
ECO VERSION
Steam boiler Condor Classic with ECONOMIZER for the preheating of the water inlet. This version is supplied with a modulating regulation.
PRE-HEATER VERSION
Steam boiler Condor Classic with PREHEATER for the comburent air preheating. With this version the burner is supplied with a separate fan.
STEAM HEATER VERSION
Steam boiler Condor Classic with STEAM HEATER for the production of superheated steam. We can add to this version an ECONOMIZER or a PREHEATER.
STEAM
CONDOR CLASSIC
Equipments
Pos. Description Pos. Description
1 Water level limiter electrocode 13 Feedwater pump check valve
2 Safety pressure switch 14 Interception valve
3 Regulation pressure switch 15 Check valve
4 Regulation / modulation pressure switch 16 Feedwater interception pump
5 Manometer 17 Steam injector
6 Safety valves 18 Steam injector main valve
7 Level indicators 19 Blowdown interception valve
8 Floating level regulators 20 Manual blowdown valve
9 Interception valve for floating regulators 21 Main steam valve
10 Drain valve (floating regulator) 22 Control panel
11 Drain valve (instrumentation tube) 23 Burner
12 Feedwater pump complete with engine
STEAM
CONDOR CLASSIC
Boiler dimensions
Model Steam
production Capacity A B C D E ØF
Kg/h kW mm mm mm mm mm mm
2500 2500 1744 5240 4100 2500 2700 2600 550
3000 3000 2093 6300 5200 2500 2700 2600 550
3500 3500 2442 5650 4500 2500 3000 3000 550
4000 4000 2791 5700 4500 2500 3000 2850 600
4500 4500 3140 6100 4600 2500 3000 2850 600
5000 5000 3488 6600 5400 2500 3000 2850 600
6000 6000 4186 6850 5500 2700 3200 3200 700
7000 7000 4884 7300 5750 300 3400 3350 700
8000 8000 5581 7400 6200 300 3400 3350 800
9000 9000 6279 7850 6300 3200 3600 3570 800
10000 10000 6977 8000 6450 3200 3700 3660 800
12000 12000 8372 8600 6900 3400 3750 3680 850
14000 14000 9767 9300 7700 3700 4100 4050 900
15000 15000 10465 9400 7700 3700 4100 4050 900
STEAM
CONDOR CLASSIC
From the commitment in the technological research of Standardkessel
Italiana and Standardkessel International, always specialized in the high
powered industrial boilers, are born the SKI generators which are carried
out by means of innovative processes that ensure a high efficiency and a
long lifespan.
Water-tube, smoke-tube, diathermal-oil industrial boilers and complete
thermal power plants.
INDUSTRIAL BOILER ITALY S.R.L. Offices and Production Unit: Via E. Fermi, 64/66 - 24050 GRASSOBBIO (BG)
Cod. Fisc. / P.IVA 04024170161 REA: BG-428870
www.industrialboileritaly.com - [email protected]
Tel: +39 035 0521 398 Fax: +39 035 0521 443