Configurator PRIMERGY TX300 S8 - Fujitsu PRIMERGY TX300 S8 / RX350 S8 System configurator and order

  • View
    0

  • Download
    0

Embed Size (px)

Text of Configurator PRIMERGY TX300 S8 - Fujitsu PRIMERGY TX300 S8 / RX350 S8 System configurator and order

  • PRIMERGY TX300 S8

    PRIMERGY RX350 S8

    System configurator and order-information guide

    Contents

    Instructions

    Configuration diagram 3.5" HDDs

    Configuration diagram 2.5" HDD/SSDs

    Configurator

    I Basic unit

    II Processor

    III Memory

    IV Graphics & GPGPU & Co-Processors

    V Accessible drives / HDD Extension Box

    VI Modular Raid Controller for 3.5" Hard Disks

    VII Modular Raid Controller for 2.5" Hard Disks or SSDs

    VIII 3.5" SAS / SATA Hard Disk Drives

    IX 2.5" SAS / SATA Hard Disk Drives or SSDs

    X PCIe-SSD

    XI External SAS Disk Array & Backup Drives

    XII Fibre Channel

    XIII Communication/ Network

    XIV System Management Products (RemoteView)

    XV Miscellaneous

    XVI Country specific Power Cords

    Change report

    August 2014

  • PRIMERGY TX300 S8 / RX350 S8 System configurator and order information guide

    Edition 30th of November 2015

    Instructions

    This document contains basic product and configuration information that will enable you to configure your system via PC-/SystemArchitect.

    Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete PRIMERGY Rack system.

    You can configure your individual PRIMERGY server in order to adjust your specific requirements.

    The System configurator is divided into several chapters that are identical to the current price list and PC-/SystemArchitect.

    Please follow the lines. If there is a junction, you can choose which way or component you would like to take. Go through the configurator by following the lines from the top to the bottom.

    Section III Memory

    There are X memory slots which can be equipped with XXX MB.

    It is permissible to make up to X passes through the memory upgrade options.

    S26361-XXX-XXX S26361-XXX-XXX

    Memory XXX MB Memory XXX MB

    X times

    max. X times per system max. X times per system

    In one chapter you can only select as many components (here 4x) as the arrow indicates. 4x

    Please note that there are information symbols which indicate necessary information.

    For further information see:

    http://ts.fujitsu.com/products/standard_servers/index.html (internet)

    https://partners.ts.fujitsu.com/com/order-supply/configurators/primergy_config/Pages/default.aspx (extranet)

    Prices and availability see price list and PC-/SystemArchitect. Subject to change and errors excepted.

    cnfgTX300S8.xlsx Instr. 2 of 27

  • PRIMERGY TX300 S8 / RX350 S8 System configurator and order information guide

    Edition 30th of November 2015

    Configuration diagram PRIMERGY

    System unit (3.5" HDDs )

    SIDE VIEW FRONT VIEW

    Hot plug power supplies 3 x 5.25" bays available

    3 x HH 5.25" free or 2 x HH 5,25" free + Option A or

    0 x HH 5.25" free + Option C

    Option A Option C

    1.6 * 5.25" 3x 1.6 * 5.25"

    Memories CPUs

    Memory CPU1

    ( Channel A + B + C + D )

    Bank I (4 Modules) Xeon DP

    Bank II (4 Modules) CPU incl. Heatpipe

    Bank III (4 Modules)

    Xeon DP

    Memory CPU2 CPU incl. Heatpipe

    ( Channel E + F + G + H)

    Accessible drives ( V )

    Bank I (4 Modules) Processor ( II )

    Bank II (4 Modules) Xeon 4C, 6C or 8C Mounting Kit DVD(sl) + LSP/LSD: (Option A)

    Bank III (4 Modules) CPU with serial QPI - support for SL (0.5") DVD Drive + LSD (Local Service Display)

    Interface and - occupies one 5.25" bay

    Memory ( III ) 4 memory channels MtK DVD(sl) + LSP/LSD + 2x SAS/SATA LFF HDD: (Option B)

    - support for 2x 3.5" SAS/SATA HDD hot plug

    + support for SL (0.5") DVD Drive + LSD (Local Service Display)

    MtK DVD(sl) + 4x SAS/SATA LFF HDD: (Option C)

    - support for 4x 3.5" SAS/SATA HDD hot plug

    + support for SL (0.5") DVD Drive

    PCI Slots

    (

    3 x 1

    2 0 m

    m S

    ta n

    d a rd

    F a n

    s ;

    N o

    R e d

    u n

    d a n

    c y )

    Hard disk drives ( VI )

    Slot 9 PCIe-3 x4, 252mm @ CPU2 3.5" SAS/SATA Possibility to install PCIe x8 cards Option D

    4-port SAS backplane

    Slot 8 PCIe-3 x16, 252mm* @ CPU2

    1 * 3.5" SAS / SATA

    Slot 7 PCIe-3 x4, 252mm* @ CPU2

    Possibility to install PCIe x8 cards 1 * 3.5" SAS / SATA

    Slot 6 PCIe-3 x16, 252mm* @ CPU2

    1 * 3.5" SAS / SATA

    Slot 5 PCIe-2 x4, 252mm* @ CPU2

    Possibility to install PCIe x8 cards 1 * 3.5" SAS / SATA

    Slot 4 PCIe-3 x8, max. 180mm @ CPU1 Possibility to install PCIe x16 cards 4-port SAS backplane

    Slot 3 PCIe-3 x8, max. 180mm @ CPU1 1 * 3.5" SAS / SATA

    Slot 2 PCIe-3 x8, max. 180mm @ CPU1 1 * 3.5" SAS / SATA

    Slot 1 PCIe-3 x8, max. 180mm @ CPU1 1 * 3.5" SAS / SATA

    Reserved for modular LAN-Controller

    2x internal USB

    Slot 10 PCIe-3 x8, max. 168mm @ CPU1 1x USSD 1 * 3.5" SAS / SATA

    Internal - reserved for modular RAID-Controller 1x USB Port

    * Slot 5-8 can carry 312mm cards as well but special release required

    Key: Included in basic unit Option ( LP ready = Slots for low profile boards)

    One CPU, one memory per CPU and one PSU has to be selected for an orderable basic unit.

    Slim DVD

    Air - Channel

    1. PSU 2. PSU 3. PSU 4. PSU

    Air - Channel

    1.6 * 5.25"

    Slim DVD

    P C

    Ie S

    lo ts

    @ C

    P U

    2 P

    C Ie

    S lo

    ts @

    C P

    U 1

    F a n 1

    1.6 * 5.25"

    LSD Option

    not used

    2 x

    9 2

    m m

    F a

    n s

    ( o

    p ti

    o n

    a l

    fo r

    re d

    u n

    d a

    n c

    y )

    F a n 3

    F a n 5

    F a n 2

    F a n 4

    F a n 6

    4 x

    9 2

    m m

    F a

    n s

    ( n

    o r

    e d

    u n

    d a

    n c

    y )

    SAS / SATA

    SAS / SATA

    SAS / SATA

    SAS / SATA

    cnfgTX300S8.xlsx Conf. diagram 3.5" HDDs 3 of 27

  • PRIMERGY TX300 S8 / RX350 S8 System configurator and order information guide

    Edition 30th of November 2015

    Configuration diagram PRIMERGY

    System unit (2.5" HDDs ) prepared for up to 8, 16 or 24x 2.5" Hard disk drives

    SIDE VIEW FRONT VIEW

    Hot plug power supplies 3 x 5.25" bays available

    3 x HH 5.25" free or

    2 x HH 5.25" free + Option A or

    1 x HH 5.25" free + Option F or 0 x HH 5.25" free + Option A + Option F

    Option A

    Memories CPUs 1.6 * 5.25"

    Memory CPU1

    ( Channel A + B + C )

    Bank 1 (4 Modules) Xeon DP Option A Option F

    Bank 2 (4 Modules) CPU incl. Heatpipe 1.6 * 5.25" 8x 2.5"

    Bank 3 (4 Modules) SAS2.0

    Xeon DP

    Memory CPU2 CPU incl. Heatpipe

    ( Channel D + E + F)

    Accessible drives ( V )

    Bank 1 (4 Modules) Processor ( II )

    Bank 2 (4 Modules) Xeon 4C, 6C or 8C Mounting Kit DVD(sl) + LSD: (Option A)

    Bank 3 (4 Modules) CPU with serial QPI - support for SL (0.5") DVD Drive + LSD

    Interface and - occupies one 5.25" bay

    Memory ( III ) 4 memory channels

    optional SFF SAS/SATA HDD extension Box: (Option F)

    - support for 8x 2.5" (SFF) SAS/SATA HDD hot plug SAS2.0 only

    - occupies two 5.25" bays

    PCI Slots

    (

    3 x 1

    2 0 m

    m S

    ta n

    d a rd

    F a n

    s ;

    N o

    R e d

    u n

    d a n

    c y )

    Slot 9 PCIe-3 x4, 252mm @ CPU2 Possibility to install PCIe x8 cards

    Slot 8 PCIe-3 x16, 252mm* @ CPU2

    Slot 7 PCIe-3 x4, 252mm* @ CPU2

    Possibility to install PCIe x8 cards

    Slot 6 PCIe-3 x16, 252mm* @ CPU2

    Slot 5 PCIe-2 x4, 252mm* @ CPU2

    Possibility to install PCIe x8 cards

    Slot 4 PCIe-3 x8, max. 180mm @ CPU1 Possibility to install PCIe x16 cards

    Slot 3 PCIe-3 x8, max. 180mm @ CPU1

    Slot 2 PCIe-3 x8, max. 180mm @ CPU1

    Slot 1 PCIe-3 x8, max. 180mm @ CPU1

    Reserved for modular LAN-Controller

    Slot 10 PCIe-3 x8, max. 168mm @ CPU1

    Internal - reserved for modular RAID-Controller internal USB

    or USSD

    * Slot 5-8 can carry 312mm cards as well but special release required

    Key: Included in basic unit Option ( LP ready = Slots for low profile boards)

    One CPU, one memory per CPU and one PSU has to be selected for an orderable basic unit.

    Slim DVD

    8x SAS2.0 backplane

    2 .5

    " S

    A S

    /S A

    T A

    2 .5

    " S

    A S

    /S A

    T A

    2 .5

    " S

    A S

    /S A

    T A

    2 .5

    " S

    A S

    /S A

    T A

    LSD Option

    not used

    2 .5

    " S

    A S

    /S A

    T A

    2 .5

    " S

    A S

    /S A

    T A

    2 .5

    " S

    A S

    /S A

    T A

    1. PSU 2. PSU 3. PSU 4. PSU

    Slim DVD

    1.6 * 5.25"

    1.6 * 5.25"

    1 *

    2 .5

    " S

    A S

    / P

    C Ie

    1 *

    2 .5

    " S

    A S

    / P

    C Ie

    S A

    S 2 .0

    o r

    S A