Upload
doquynh
View
232
Download
0
Embed Size (px)
Citation preview
High Integrity Valves at a Lower Cost and Reduced Delivery Time*
*Compared to Engineer to Order Valves
Engineer to Order:
Size2" thru 30" (Class 150#, 300#, 600#) 2" thru 18" (Class 900#)
Temperature -45°C (-50°F) / 204°C (400°F)
Body Material A350-LF2
Ball & Seats A182-F316 / A182-F51 / A351-CF8M / A995-Gr.4A (based on size/class)
Stem Material 17-4PH
Seat Insert Nylon or PEEK
Seat Configuration SPExSPE (option with SPExDPE)
Seals HNBR or PTFE+Elgiloy Lip seals
Bolts & Nuts L7M/G7M
Engineering Design
Material Purchasing Machining Assembly
& Testing28 - 34 Weeks
Configure to Order:
Material Purchasing Machining Assembly
& Testing20 - 24 Weeks
Configure to Order Ball ValvePreconfigured, Engineered Ball Valve Line
[email protected] www.circorenergy.com/pibiviesse
Reference Standards API 6D 24th Edition
NACE MR0175 (last edition) (wetted parts)
API 607 / ISO 10497
ASME B16.15 (NPS < 22” & NPS = 24”)
ASME B16.47-Series A (NPS > 24”)
NDE’s 100% Visual and dimensional
100% MPI on Pressure Retaining Parts in Carbon Steel
100% DPI on ball, seats, stem
NDE operators are certified per EN 473/UNI EN ISO 9712 by CICPND, which is accredited by ACCREDIA (cert. N° 012C) per EN 45013/ISO 17024
NDE Instruments:1) Spectrometers 2) Wood lamps 3) Magnaflux 4) Photometers
Hardness Test Instruments (Vickers-Rockwell-Brinell-Shore)
Surface roughness Instruments
Gauge Radioactivity
Material Certification CTO valves will be made in Italy (Country of Origin), with Raw Materials procured globally through CIRCOR’s supply chain.
EN10204:2004 – 3.1– Body, Closures, Gland Plate / Body cover– Ball, Seats, Stem– Bolting
EN10204:2004 – 2.2 / 2.1– Other components
Final Testing & Painting Hydrostatic Shell Test per API 6D, 9.3– Pressure: 1.5 times the design pressure– Acceptance criteria: zero leakage
Hydrostatic Seat Test per API 6D, 9.4– Pressure: 1.1 times the design pressure– Acceptance criteria: zero leakage (ISO 5208-Rate A)
Low Pressure Pneumatic Air Seat Test per API 6D, H,3,3 Type II– Pressure: 5.5 barg– Acceptance criteria: zero leakage (ISO 5208-Rate A)
Our internal inspectors and operators for leak test are certified in accordance with ASNT-SNT-TC-1A and approved by a III level Examined ASNT.
Painting– Pibiviesse STD.001– First Coat: High Build Epoxy Paint, D.F.T 75μm– Final Color: RAL 7035 - Light Grey
Documentation Package– General Assembly Drawing– Name Plate Drawing– Bill of Material– Overall Dimension Drawing
– Torque Table– ITP Pibiviesse Standard Format– Painting Procedure– Test Reports
[email protected] www.circorenergy.com/pibiviesse