Upload
oskidol
View
241
Download
1
Embed Size (px)
Citation preview
7/22/2019 Construction Cost Data Workbook
1/29
CONSTRUCTION COST DATA WORKBOOK
Neil Sinclair, Philip Artin and Stewart Mulfrd
DMS Internatinal
Cnference n the Internatinal C!pari"n Pr#ra!
Wrld Ban$
Wa"hin#tn, D%C%, March &&'&(, )**)
7/22/2019 Construction Cost Data Workbook
2/29
COLLECTION OF CONSTRUCTION COST DATA
WORKBOOK MODIFIED BILLS OF QUANTITY FORMAT
Introduction
DMS International, Inc. was requested to assist the World Bank with creating a
method of collecting construction cost data from member countries throughout the world
to assist with economic studies. The task of data collection is a difficult procedure and
can be prone to wide ariations. Based upon our e!perience as construction cost
consultants, estimators and quantit" sure"ors we chose to deelop a data collection
method based upon a workbook format. #ur workbook defines construction line items
and quantities for relatiit" simple building t"pes. In fact, four building t"pes hae been
chosen$
%esidential house
Warehouse
%oad
#ffice building
The workbooks would be sent to member countries to be completed b" local
contractors, estimators or quantit" sure"ors. When completed the data would be
collected and anal"&ed b" the World Bank as part of its oerall economic stud".
Before we e!plain further about our workbook format and design, reference must
be made to preious studies and methods of construction cost data collection. #ne
comprehensie reiew of past practices has been completed b" Dubner and Mc'en&ie (.
2
7/22/2019 Construction Cost Data Workbook
3/29
This detailed stud" compares arious methods and documents the adantages and
disadantages of each method. The method that proides the best opportunit" for data
collection was noted as the Bills of )uantit" *B#)+ method. This method appears to
hae adantages oer the other methods but "et een with the B#) method some
potential pitfalls e!ist.
B#) is basicall" a listing b" trade of certain construction components that
make up the total pro-ect. The pro-ect ma" be an office building or a warehouse. The
B#) documents quantities for each element of the building t"pe such as cubic meters
of concrete foundations or square meters of roofing material. B#)s are used
frequentl" to assist in deeloping tenders or bids for pro-ects throughout the world. The
B#) ma" be proided b" an independent part" or in house b" the bidding contractor.
#nce the quantit" of concrete footing is known a unit price to coer for material, labor
and equipment is applied to deelop the cost of each line item or component. The total
pro-ect is basicall" a summation of all the indiidual line items. /arious leels of
sophistication in terms of measurement detail and description e!ist with B#)s but the
same principals appl". The paper prepared b" Dubner and Mc'en&ie(, suggests that
the B#) method offers the best opportunit" for data collection, though the" suggest
issues that must be dealt with to allow data collection to proe more successful than in
the past. The issues highlighted were$
Interpretation of specifications
0!pertise to price B#)
pplicabilit" of specifications to local design criteria
#er sophistication and requirement to price detail pro-ect work break downs
3
7/22/2019 Construction Cost Data Workbook
4/29
Silke Stapel1also highlights arious issues with cost data collection along the similar
lines as Dubner and Mc'en&ie(. Stapel 1is part of 0urostat, an organi&ation that has
actuall" performed data collection on behalf of 02 member states. 3art of the 0urostat
data collection used detailed Bills of )uantities.
Stapel 1along similar lines as Dubner and Mc'en&ie(noted some issues such as$
Data collection was e!pensie in terms of resources required to implement
s"stem
Bills of )uantities adopted b" 0urostat appear too cumbersome in terms of leel
of detail and sophistication
It would appear that the 0urostat data applies to adanced 4ountries in terms of
construction management and professional e!pertise. The 0urostat sure"s collect
prices for about (5 Bills of )uantities. The t"pical Bills of )uantities could hae up to
(666 line items.
Modified pproach
In our approach, we hae attempted to incorporate improements into the
workbook approach such as$
3roide a consistent quantit" of materials and line items to price
7ine items are simple and comprise basic building materials common to most
countries *e.g. cubic meters of footings+
4
7/22/2019 Construction Cost Data Workbook
5/29
)uantities and line items reflect appro!imate quantities according to a trade
break down. The trade breakdown adopted reflects merican Institute of
4onstruction Specifiers, (8 diisions trade format. The trade format reflects a
traditional worldwide understanding of how a pro-ect is built and categori&ed b"
specialt".
3ro-ects chosen offer little comple!it" that would impact construction means and
methods. The pro-ects proide materials used in nearl" all construction pro-ects
such as concrete, steel, wood, and plumbing piping, irrespectie of what countr"
or location this pro-ect ma" be located.
3ro-ects chosen are eas" to understand allowing the estimator to grasp the
oerall pro-ect massing and configuration. Workbooks contain outline drawings.
3ro-ect content proides for the basic construction products used e!tensiel" in
an" pro-ect. This limits the specification issues that proide inconsistenc" among
different 4ountries. Basic materials such as concrete are relatiel" similar from
4ountr" to 4ountr".
Designs chosen offer little comple!it" for pricing purposes. If the material or
component is not widel" used then an opportunit" e!ists for each indiidual
estimator to customi&e pricing based upon best local practices. This will occur to
some limited e!tent from 4ountr" to 4ountr" but as long as a substitute of equal
is priced then this ariable factor will be minimi&ed.
3ro-ect site work and substructures are quantified therefore minimi&ing pro-ect
cost ariances b" building on a flat site as compared to a steepl" sloping site.
5
7/22/2019 Construction Cost Data Workbook
6/29
#utline specifications proided show basic specifications that allow the estimator
to use more locall" compliant products.
Its accepted that the workbook could and should onl" be completed b" someone
e!perienced in estimating construction pro-ects. To hae the workbook completed b"
ine!perienced estimators would onl" add to the potential for erroneous data. B"
keeping the models and format basic b" design the chances of greater oerall success
will e!ist. person e!perienced in estimating construction costs should hae little
problem working through the workbook and creating a complete price for each pro-ect.
The probabilit" of success with the collection of cost data must be iewed in two
parts. 3art one being the design and format of the actual workbook and part two being
the e!pertise of the person completing the workbook e!ercise. It would be rather foolish
to issue the workbook to an indiidual unqualified in pricing B#) or creating cost
estimates. The success of the workbook format will onl" e!ist if the data is priced b"
qualified indiiduals. 0en with qualified indiiduals ariations will occur. Sinclair 9
found that een qualified estimators would not produce equal estimates gien the same
information from which to create an estimate. The balance of this paper identifies this
:estimating; problem to allow the perceied problems of collecting data ia workbooks to
be put totall" into perspectie. The author of this paper agrues that perfection of data
collection can onl" be a goal but can neer be achieed.
6
7/22/2019 Construction Cost Data Workbook
7/29
The 0stimating 3roblem
or those
readers not familiar with cost estimating, the process inoled is comple!. 7earning
about cost estimating will help non?cost?estimators understand what is inoled and
what limitations e!ist when reiewing cost data generated b" cost estimators.
>ig. (.( The estimating ob-ectie$ to hit the target.
>igure (.( illustrates sub-ectie estimates attempting to hit the target, which is the actual
cost. The sub-ectie alue chosen b" each estimator was considered to represent the
resources required b" each firm to complete an e!ample office?building pro-ect. We can
see that the estimates are all scattered around the target of actual cost.
7/22/2019 Construction Cost Data Workbook
8/29
9. 4ost of labor
@. 4ost of material and selection of an appropriate wastage allowance.
5. ddition of oerheads and profit
3roblem ( ? 4hoice of work Method
There ma" be man" or onl" a few work methods aailable. >or instance, should
the estimator assume a three?man or a four?man crew, composed of two or three
brickla"er with either one or two laborers= Will there be central mortar mi!ing or
indiidual mi!ers for each crew=
7/22/2019 Construction Cost Data Workbook
9/29
3roblem 9? 4ost of labor
7/22/2019 Construction Cost Data Workbook
10/29
n estimator has to posses the skill and e!pertise to assemble the known facts and
rationall" sole the estimating equation. igure (.9 amplifies stages 5 and 8, here the estimator selects a range of most likel"
alues and, after a process of fine tuning and :weighing up; of the situation, the
estimator modifies his or her initial crude selection and finall" selects a alue that he or
she considers to be most likel".;
10
7/22/2019 Construction Cost Data Workbook
11/29
>ig. (.9 >ine tuning an estimate.
The thought process preiousl" described and shown in fig.(.1 and (.9 applies to our
h"pothetical brickwork e!ample, but generall" indicates how and estimator arries at a
solution for each separate item of the cost estimate. total cost estimate consists of
numerous line items and specific sections relating to arious trades and specialists
subcontractors. This thought process will usuall" be repeated on numerous occasions
during the compilation of one single estimate or bills of quantit".
7ocation
Since a construction pro-ects location affects the final cost, an estimator must
understand what particular locational factors will be encountered and what
considerations should be taken into account when formulating the estimate. 0stimators
are aware that costs in Boston are different that costs in Miami, but not eer"one is
aware that the locational ariation within the Boston area or within the Miami area also
11
7/22/2019 Construction Cost Data Workbook
12/29
influence construction costs. >or e!ample, the pro-ect location ma" be a restricted cit"
center infill site or a remote countr" site, each haing its own particular difficulties that
the contractor must oercome.
/arious locational difficulties are described$
(. %emoteness
1. 4onfined sites
9. 7abor aailabilit"
@. Weather
5. Design considerations *related to location+.
8. /andalism and site securit"
%emoteness
remote construction site, for e!ample, a pro-ect site located high in the Blue
%idge Mountains of /irginia, poses a contracting organi&ation with a difficult set of
problems to cope with.
4ommunication 3roblems
If adequate communications such as telephone are not aailable, then a radio or
cellular?t"pe installation is required. telephone is a requisite to an" construction
pro-ect$ lack of communication during the construction process can result in ma-or,
costl" errors. In addition, because the pro-ect location is further awa" from the head
office, additional long?distance telephone charges will be incurred.
12
7/22/2019 Construction Cost Data Workbook
13/29
Transportation 3roblems
ll material and labor must be transported to the building site. If the transport
route is poor *if, indeed, an" route e!ists at all+, then dela"s in material delieries ma"
occurA large ehicles ma" damage narrow bridges or other items of propert", whose
replacements costs must be borne b" the contractor.
It ma" be necessar" for the contractor to widen the e!isting route or construct a
bridge to allow material trailers access into the -ob site. The route that is proposed
should be studied carefull" b" the estimator. 0!isting capacit" of e!isting bridges on
route should be established to erif" if equipment loads can be accommodated of if the
bridge needs to be strengthened b" the contractor. >inall", the cost of hauling items of
equipment to the -ob site increases as the distance increases. Cien these
considerations, the requirement for management to make the correct equipment
selections becomes er" important.
Increased Material 4ost
Increased material cost is primaril" due to increased transport charges such as
when distance for haulage from the depot to a remote -ob site is longer than the haulage
associated with other construction pro-ects the estimator has preiousl" worked on.
er"@ found that if the material was fragile or ha&ardous, then transport costs
fluctuated widel" depending on distance. err" crossing or bridges with tolls increase
the basic cost of materials.
13
7/22/2019 Construction Cost Data Workbook
14/29
3ower and Water
3ower and water are a necessit" for building construction. Water is needed for
materials such as concrete, for cleaning the building, and for man" other uses. Salt
water is not acceptable in most specifications for concrete or mortar mi!ing, so remote
pro-ects without a conenient domestic water suppl", een if the site has access to
thousands of gallon of seawaterA require water to be trucked to the -ob site. The cost of
water depends on the hauling costs. In some instances wells can be dug to pump water
to the surfaceA of course, the costs inoled must be considered in the estimate.
If no power source is aailable, then power must be proided b" generators.
4onfined Sites
The problems associated with confined sites generall" take the form of
congestion resulting in restricted working areas resulting in low productiit" from labor
and equipment. These difficulties are generall" associated with downtown sites, but this
need not alwa"s be the case.
In e!treme cases, congestion can limit the choice of work methods, t"pes of
equipment used, and si&e of crew to be emplo"ed. 4areful inestigation of the
problems likel" to be associated with each particular site will allow a realistic
assessment of factors such as productiit" to be made. 3ro-ect startup requires a
careful utili&ation of resources in order to proide production outputs that ma!imi&e
profits. 4onfined sites create logistical problems. Material moement should be
minimi&ed$ each time an item of material is moed, its cost to install in place increases.
When materials are deliered to a confined site, the material should be used
14
7/22/2019 Construction Cost Data Workbook
15/29
immediatel". If this is not possible, a storage area should be aailable to receie the
material, or, if possible, the material should be offloaded directl" at its intended
utili&ation point.
The estimator needs to consider the unique logistical problems associated with
each -ob site. These problems, including restricted access, restricted material la" down
area, restricted equipment storage areas, and restricted location for site trailers, affect
the t"pe of equipment that can be used, the effectie management of the -ob, the worker
productiit", and the amount of labor inoled in handling material. Since confined sites
nearl" alwa"s pose logistical problems, the unit prices used b" the estimator must
account for the increased costs.
7abor ailabilit"
0ach location has ar"ing amount of aailable skilled and unskilled labor,
depending on the condition of the local econom". If labor of an" kind is not aailable
locall" *as ma" be the case in remote areas+, then labor must be imported from other
location. In order to moe labor from one area to another, a financial incentie is
usuall" required. The magnitude of this incentie will ar" depending on the state of the
labor market. If labor is imported, accommodations ma" hae to be proided. 7abor
camps comprising full time kitchen staff, dormitories, leisure facilities, etc., hae been
set up on ma-or construction pro-ect to house the contractors labor force. The leisure
facilities keep the labor force rela!ed and occupied during an" rest periods. 7iing and
working on a remote construction site can be er" demorali&ing, after a while, and b"
15
7/22/2019 Construction Cost Data Workbook
16/29
keeping the morale leel high, labor turnoer is reduced. Cenerall", the cost of
importing labor will follow the laws of suppl" and demand.
Weather
Since the building process is highl" weather dependent, e!treme conditions can
greatl" affect building costs. These e!treme weather conditions include large amount of
rain or snow, occurrences of ice and frost, and high humidit" and heat. Their effects on
cost include the following situation. 4oncrete pours in temperatures below @6 degrees
>ahrenheit require special precaution. With cold weather concreting, the cost of
admi!tures, insulation the formwork, remoing ice from formwork, and protecting the
freshl" placed concrete from dropping below the specified temperatures must be taken
in to account b" the estimator. ot onl" does cold weather affect concrete, but hot
weather concreting has its associated problems as well. During periods when the
temperature e!ceeds E6 degrees >ahrenheit, special precautions are required to reduce
and maintain the concrete below this temperature. >or e!ample, ingredients such as
the water ma" be cooled or chopped ice can be utili&ed. nother alternatie is to use
liquid nitrogen to cool the concrete. dmi!tures and low heat cement can be used to
control the set and hardening times of the concrete to achiee the design strength and
qualit". ll these precautions and procedures increase the cost of pouring, placing, and
curing concrete.
0!posed sites ma" hae problems associated with high winds, which affect crane
and hoisting operations, and the contractors dust control program. dditional
temporar" bracing to partl" completed structures ma" be required to preent a collapse
16
7/22/2019 Construction Cost Data Workbook
17/29
due to high wind gusts. In areas where hurricanes occur, the estimator should consider
the cost of temporar" measures required to preent damage to a structure before,
during, and after a hurricane. It would be prudent to allow for the costs inoled in
bracing, tieing down structures proiding sand banks, garaging equipment, and storing
particular materials such as doors and windows off the -ob site, unless safe, dr", and
secure storage e!ists on the pro-ect.
7abor productiit" is also associated with the weather. During poor weather
when it is cold, damp, and wind", the morale of workers e!posed to aderse elements,
drops, which in turn results in a decline of productiit". During da"s when it ma" be
impossible to work, such as during a torrential rain, the productiit" is &ero.
Design 4onsiderations *related to location+
The location of a pro-ect has certain aspects that must be considered b" a
designer. >or e!ample, in historic >rederick, Mar"land, all designs must harmoni&e with
the e!isting historical buildings. 3lanning committees ma" dictate the material
selections and configurations that designers must abide b" to suit certain local
conditions.
These design considerations can create estimating problems in historic districts.
The estimator must know if the materials specified are, in fact, locall" aailable of if local
labor e!ists to carr" out complicated historical work, such as ornate plaster workA if not,
a specialist will be required. Traditional building techniques tended to be labor
intensie. If the same techniques must be repeated, then the estimator must be familiar
with the procedures inoled. If workers are required to use traditional, building methods
17
7/22/2019 Construction Cost Data Workbook
18/29
with which the" are unfamiliar, then a learning cure cost needs to be built into an" unit
price.
The local climate also dictates the designers choices in mechanical and
electrical s"stems and in the choice of materials and design of the building enelope.
Material resources will fluctuate from location to location throughout the countr", and the
designer must inestigate what materials are locall" and economicall" aailable.
>inall", each localit" tends to hae its own construction trade practices, and the
estimator should be familiar with them.
/andalism and Site Securit"
Site integrit" is an important problem in urban areas. 3rotectie measures can be
e!pensie, for e!ample, when 1@?hour guard serice and perimeter enclosures, are
required. The leel of securit" will depend on the risk to the pro-ect from the
surrounding neighborhood. The local police should be consulted.
/ariabilit" of 0stimates
The following are where cost ariances between one estimate and another can
occur$
(. )uantit" take off.
1. Material 4osts.
9. 7abor 4osts.
@. 7abor productiit" forecasts.
5. Work Methods.
18
7/22/2019 Construction Cost Data Workbook
19/29
8. 4onstruction equipment costs.
F. Indirect Gob costs.
E. Subcontractor quotations.
H. )uotations from material suppliers.
(6. 2nknown site conditions.
((. 7ocational >actors.
(1. 4ost associated with the time element of the construction pro-ect and escalation
costs.
(9. Staging and pro-ect start up costs.
(@. #erheads.
(5. 3rofit element.
(8. 4ontingenc" and risk allocation.
(F. 0rrors in estimate formulation.
(E. Basis of information used to formulate estimate.
(H. Market forces.
Wendes5, commenting on the estimating abilit" of estimators lists the following points
concerning their performance when estimating pro-ects$
(. %easonabl" correct with shop labor if eer"thing is standard.
1. Cood with raw material and equipment pricing.
9. :#ka"; with subcontractor quotes if the" are familiar with the workA :bomb out; if the"
are unfamiliar.
19
7/22/2019 Construction Cost Data Workbook
20/29
@. t the :high school leel; with their quantit" take offs.
5. 2nsatisfactor" with special items.
8. 3oor with field labor.
F. >ail with oerhead markups.
E. 4oerage of profit is in the realm of wishful thinking.
/ariances between estimates and actual costs do occur. The estimator,
unfortunatel", alwa"s appears to be incorrect, since an estimate is an :estimate;, which
is a forecast of the anticipated future cost. Man" forces can, in realit", cause the actual
cost to ar" from the estimated cost. It sometimes appears to owners and management
that, when the estimate does not equal the actual costs, a mistake has been made.
Because it is an estimate, it should alwa"s be e!pected that the actual cost will ar"
somewhat from the estimated cost. It is the -ob of the estimator to minimi&e the e!tent
of ariance between estimate and actual cost. n" data collection s"stem must be able
to recogni&e that ariances e!ist.
0!planation of /ariances ? Wh" Do The" #ccur =
s preiousl" discussed, the author beliees that there are (H ma-or areas where
differences between cost estimates can e!ist. When compiling the cost estimate, each
of the (H categories has to be dealt with b" the estimator. In dealing with each
categor", the estimator has to make seeral assessments, such as what subcontractor
price for dr"wall should be used in the cost estimate or what labor productiit" shall be
used for the carpenters installing intricate millwork. The total cost estimate is made up
20
7/22/2019 Construction Cost Data Workbook
21/29
of numerous smaller cost estimates for each actiit" required to complete the oerall
pro-ect. The estimating equation is therefore composed of a series of calculations, the
estimator has to assess and propose a monetar" solution. The total cost estimate is the
total of all the minor monetar" solutions.
0ach assessment the estimator performs is based on$
3reiousl" recorded data *historical data+
The estimators own past e!perience.
3reious e!perience of others.
7/22/2019 Construction Cost Data Workbook
22/29
>ig. (.@ Basic reasons for ariances being introduced into cost estimates the sub-ectie assessment.
7/22/2019 Construction Cost Data Workbook
23/29
lwa"s be war" of working with historical data that "ou are not familiar with.
/arious sources of historical data are aailable, such as published price books,
cost information publication serices, trade -ournals, and, most important, cost feedback
from actual pro-ects that the estimators firm has been inoled with and therefore most
knowledgeable of.
ctual cost feedback is the best information to use if it were recorded and
documented properl". The feedback c"cle *see >ig (.5+ is of critical importance. In
order for estimating to be effectie, feedback from the -ob site must occur. ctual costs
should be compared with estimated costs to inform the estimator of his or her
performance during the estimating phase. 2nfortunatel", the feedback process is not
carried out effectiel" within the industr". To quote the Business %ound Table %eport
on modern management s"stemsF$ :0en within companies, a feedback of actual costs
is not consistentl" used to reiew and ad-ust the basis for estimating future pro-ects.;
23
7/22/2019 Construction Cost Data Workbook
24/29
>ig. (.5 4ompan" cost feedback c"cle.
Sound estimates are produced from a combination of e!perience and recorded
cost data of similar work preiousl" performed. The cost data, if proper feedback
procedures hae been adopted, will hae been refined oer time to reflect accurate
costs for performing certain operations. The estimator can use these data to formulate
estimates accuratel" for future work. If the data to formulate are incorrectl" used or
formulated, then mistakes will undoubtedl" occur.
ccurac" /ersus 0conom"
0stimating inoles the assessment of probabilities and risks making complete
accurac" impossible. igure (.8 indicates the accurac" ersus econom" dilemma. s more of the
estimators time and effort are deoted to the preparation of the cost estimate, a point is
reached where obtaining the utmost accurac" is not economical. s we hae discussed
(66J accurac" is impossible.
24
7/22/2019 Construction Cost Data Workbook
25/29
7/22/2019 Construction Cost Data Workbook
26/29
The 3areto Distribution in 0stimates
The estimator will price *or at least consider+ each item he has discoered, such
as cubic quantit" of concrete footings, walls or slabs. These items ma" be in the form of
a detailed quantit" take off or some other form sufficientl" detailed to enable confident
estimating to occur.
0ach of the items discoered b" the estimator has a cost importance that aries
in magnitude. Some items are of more cost importance than others, since the" form a
larger percentage of the total cost than the minor items do. The 3areto(effect is seen
to occur, that is, a small proportion of the items account for a er" large proportion of
the cost. Inestigation into the cost structure of items in Bills of )uantities b" Brown E
has shown that, t"picall", 16J of the items priced contained at least E6J of the total
cost. *See >ig (.E+
>ig. (.E 3areto principle applied to estimating. *%eprinted from %. Brown, Investigating into the Feasibilityof Applying the Pareto Principle to SMM ills of !"antities of #ost Planning$ 3ro-ect %eport,
7oughborough 2niersit", 2'.+
1At the end of the 19 thcentury an Italian economist, Vilfredo areto, de!elo"ed a cur!e #no$n as %areto&s 'a$ of
(istri)ution*+
26
7/22/2019 Construction Cost Data Workbook
27/29
The 3areto effect can be used to great adantage b" appl"ing strict control oer
the ma-or itemsA the chance of ma-or errors and discrepancies occurring is therefore
reduced. #wing to the time constraints inoled with preparing a competitie bid, the
3areto effect should be taken adantage of. 0stimators should be quick to recogni&e
what the ma-or items of cost importance are and deote attention to these items. When
faced with abnormal conditions, the search for the critical items of cost ma" take longer,
but the 3areto principle should still appl". Both Dubner and Mc'en&ie( and Stapel1
recogni&ed this aspect with current B#) methods. We hae attempted to proide
concise and specific line items in the modified work book approach to accomplish ma-or
resource saings at er" little, if an", e!pense of qualit".
It has been noted that wide ariances do occur between estimates. If (66
estimators prepared an estimate for the same pro-ect using identical drawings and
specifications, then (66 different estimates would be submitted. %emarkabl", though,
the bottom line of the estimates would be within an acceptable range of some N? (6J
of each other. This is often the case when contractors submit bids for pro-ects. The
bids submitted b" the ma-orit" of bidders are quite often er" close to each other.
Though, when e!amination of the bidders estimates occur, the cost difference between
each of the trades differ greatl" *up to 15J+ and when e!amination of the cost to
complete each actiit" within each of the trades occurs, the cost differences between
each bidders numbers can be as much as 56J. The degree of difference between
estimates will therefore differ depending on whether "ou are e!amining the bottom lines,
the trade amounts, or the cost of actiities within each trade. Creater ariances within
estimates occur when uncertaint" e!ists, such as in e!caation work. #ur workbook
27
7/22/2019 Construction Cost Data Workbook
28/29
7/22/2019 Construction Cost Data Workbook
29/29