Upload
wilbur-suanding
View
217
Download
0
Embed Size (px)
Citation preview
We understand your needs better
Construction Products Catalog 2013
l The pack clearly indicates material groups for which it is most suitable.
l The blade diameter is clearly displayed to avoid incorrect blade selection
l Dos amd Donts mentioned on each pack point out correct and appropriate usage of Clipper Diamond Blades.
l The construction material for which the product can be used is prominently mentioned along the product pictogram, to reduce incorrect diamond blade selection.
Clear and dynamic packaging
Safety : The Number 1 Priority for NORTON
Wear a respirator. Wear eye protection. Read the instructions.
Wear gloves. Wear hearing protection. Not to be used for side grinding.
Conformity to Safety Regulations: EN13236l NORTON is one of the first diamond tool manufacturers to comply with Safety and Quality Control
regulations laid by European Product Code - EN13236.l NORTON certifies that all their diamond products fully comply with the requirements of EN13236.l NORTON strongly advises users not to use products that do not carry the marking of EN13236.
ww
w.g
rin
dw
elln
ort
on
.co
m
DOl Ensure that the product is suitable for its purpose.l Disconnect the power to the machine before fitting
the diamond blade.l Examine all products before mounting and
periodically, for possible defects or damage (core flatness, fatigue cracks, undercutting, arbor damage.)
l Check that correct mounting devices are used and that they are clean, undistorted and free from burrs.
l Always use a correctly designed and adjusted guard (on the blade and belts).
l Wear appropriate personal protective equipment at all times.
l Ensure accordance between product direction arrow/ machine rotation.
Norton Diamond Blade - Important Usage Information
Diamond Blades are safe if used correctly.
DO NOTl Use a machine that is not in good working order or one with
defective parts.l Force the abrasive onto the mounting device or modify the size
of the mounting hole.l Exceed the maximum operating speed marked on the product.l Apply shock or excessive force to the product or let it overheat.l Use mounting flanges which are not clean and flat.l Tighten the mounting device excessively.l Start the machine until the guard is in place and fastened
securely.l Grind material for which the product is not designed.l Stop the abrasive by applying pressure to its surface. Let it stop
naturally.l Exceed permissible rotation speeds : refer to values mentioned
on the product.
Diamond Blades are dangerous, if abused.
Professional Blades
Professional Blades - Value for Money Good value for money laser-welded blade, for wet or dry cutting. Versatile product designed for petrol handheld saws, floor saws and masonry saws.
ProductCode
Type Application Size Brand
Dia Bore Height
CP1112 Segmented Marble & Natural Stone 300 50 12 Stone Cut
CP2212 Continuos Rim Tiles and Marble 300 50 10 Stone Cut
CP1114 Segmented Marble & Natural Stone 350 50 12 Stone Cut
CP2614 Segmented Concrete / Asphalt 350 50 10 Concrete Super
CP2814 Segmented Granite 350 50 10 Stone Cut
CPK14C Segmented Concrete / Asphalt 350 50 10 Concrete Super
CPK14G Segmented Granite 350 50 10 Stone Cut
CPK14S Segmented Noise Less 350 50 10 Noiseless Blade
CP1116 Segmented Marble & Stone 400 50 12 Stone Cut
CP2616 Segmented Concrete / Asphalt 400 50 10 Concrete Super
CP2618 Segmented Concrete / Asphalt 450 50 10 Concrete Super
CP2620 Segmented Concrete / Asphalt 500 50 10 Concrete Super
Diamond Saw BladesSegmented Blade Segmented Blade has number of gullets which help in dirt removal and smooth cutting of the material. The segments are made up of optimum bond matrix which hold the diamonds and provide a faster cut rate and a longer blade life. This general purpose blade is ideal for cutting stones, bricks, blocks, cured concrete and masonry.
Continuous Rim Blade Continuous Rim Blade is used to produce chip-free, clean cuts on a variety of hard, ceramic materials. The high quality diamond provide for a faster cut-rate and a longer blade life. The consistent diamond distribution and concentration combined with high-quality steel core reduces distortion at high operating temperatures, reduces the vibration and thus provide high performance.
ProductCode
Application Size Color Brand
Dia Bore Height CP8005 Marble and Granite 80 20 5 Stone CutCP105C Tiles and Marble 105 20 5 Stone Cut RimCP2204 Marble and Granite 105 20 5 Star Cut RimCP2268 Granite and Concrete 110 20 9 Star RimCP224A Tiles and Marble 110 20 10 AtlasCPM224 Marble and Granite 110 20 5 AtlasCP2724 Marble and Granite 110 20 9 ClipperCP2240 Tiles and Marble 110 20 10 Bear+
ProductCode
Application Size Color Brand
Dia Bore Height
Turbo BladesCP4068 Granite and Concrete 110 20 9 Star TurboCPM404 Marble and Granite 110 20 7.5 AtlasCP2744 Marble and Granite 110 20 9 ClipperCP4040 Marble and Granite 110 20 10 Bear+
Thin Turbo Blades
CP117T Marble and Granite 110 20 9 Samrat
Turbo and Thin Turbo Blades Sinter Turbo Blade combines the advantages of both Continuous Rim and Segmented Rim blade in cutting of bricks, blocks, tiles, concrete and masonry materials. Designed for fast cutting with less chipping, better cooling and excellent dust removal.
ww
w.g
rin
dw
elln
ort
on
.co
m
ProductCode
Application Size Color BrandDia Bore Height
CP1104 Natural Stones 105 20 8 Stone CutCP2804 Granite 110 20 7.5 ClipperCP2904 Granite 110 20 9 ClipperCP8868 Granite and Concrete 110 20 9 StarCP1145 Granite/ Marble / Concrete 110 20 10 SamratCP1140 Marble & Granite 110 20 10 BearCP114A Granite / Marble / Concrete 110 20 10 AtlasCP2704 Marble and Granite 110 20 9 ClipperCPM004 Marble and Granite 110 20 7.5 AtlasCP1259 Marble and Granite 125 20/22.23 9 SamratCP1549 Marble & Granite 154 20/22.23 9 Samrat
CP1810 Marble & Granite 180 20/22.23 10 Samrat
CP1010 Marble & Granite 250 22.23/25.4 10 Samrat
Flat Diamond Wheels Diamond Flat Wheels are mainly one-sided wheels used for calibrating, leveling, smoothing and sculpturing stones to adjust thickness and flatness of stone slabs and are featured with high removal, low noise and long life.
ProductCode
SegmentDiameter Bore Height Type
CPX8s 80 20 10 Segmented
CPX8c 80 20 10 Turbo
CPX10s 100 20 10 Segmented
CPX10c 100 20 10 Turbo
Tuck Points Univeral Dry and Wet cutting Tuck Point Blades are used for making grooves on the surface of the construction materials and repairing grout, cleaning and routing cement morton joints. Thicker segments provide a faster cut-rate and longer blade life used for cutting green concrete, joints of bricks or blocks, masonry or granite.
Available in 4 and 8 diameter Diamond Segmented Blades in 5.5 mm segment thickness.
Cup Wheels Diamond Cup Wheels are mainly used for buffing, beveling, smoothing and sculpturing stones. Cup Wheels are designed for wet and dry grinding on concrete, brick, blocks, medium-to-hard stone and masonry.
ProductCode
Size Brand
Dia Bore Height
CPM4F 105 20 8 Continuous
CPM4FT / CPZ4FT 105 20 8 Turbo
ww
w.g
rin
dw
elln
ort
on
.co
m
Wood Cutter BladesTCT Circular Saw Blade for wood cutting is a specially designed multipurpose diamond blade ideal for rip and crosscut application suitable for both hardwood and softwood. Its directional cut does not allow the wood dust and heat to accumulate, thereby giving a smooth and comfortable cut.
Their sharp and tall teeth arrangement helps in fast, smooth and comfortable cutting for all wood cutting applications.
ProductCode
Size Type
Dia Bore Teeth
CP416 110 20 16 Clipper Woodcutter
CP430 110 20 30 Clipper Woodcutter
CP440 110 20 40 Clipper Woodcutter
CP440R 110 20 40 Clipper Woodcutter
CP440A 110 20 40 Atlas Woodcutter
CP440B 110 20 40 Bear Woodcutter
CP440C 110 20 40 Clipper Woodcutter
CP440T 110 20 40 Ultra Thin
CP530 125 20 30 Clipper Woodcutter
CP540 125 20 40 Clipper Woodcutter
CP540A 125 20 40 Atlas Woodcutter
CP540B 125 20 40 Bear Woodcutter
CP540C 125 20 40 Clipper Woodcutter
CP640 150 20 / 22.23 40 Clipper Woodcutter
CP740 180 22.23/25.4 40 Clipper Woodcutter
CP760 180 22.23/25.4 60 Clipper Woodcutter
CP1840 180 22.23/25.4 40 Clipper Woodcutter
CP1860 180 22.23/25.4 60 Clipper Woodcutter
ProductCode
Size Type
Dia Bore Teeth
CP2040 200 22.23 / 25.4 40 Clipper Woodcutter
CP2060 200 22.23 / 25.4 60 Clipper Woodcutter
CP2080 200 22.23 / 25.4 80 Clipper Woodcutter
CP2540 250 22.23 / 25.4 40 Clipper Woodcutter
CP2560 250 22.23 / 25.4 60 Clipper Woodcutter
CP2580 250 22.23 / 25.4 80 Clipper Woodcutter
CP2510 250 25.4 /30 100 Aluminum Wood Cutting
CP2512 250 25.4 /30 120 Aluminum Wood Cutting
CP3040 300 25.4 / 30 40 Clipper Woodcutter
CP3060 300 25.4 / 30 60 Clipper Woodcutter
CP3080 300 25.4 / 30 80 Clipper Woodcutter
CP3010 300 25.4 /30 100 Aluminum Wood Cutting
CP3012 300 25.4 /30 120 Aluminum Wood Cutting
CP3510 350 25.4 /30 100 Aluminum Wood Cutting
CP3512 350 25.4 /30 120 Aluminum Wood Cutting
Polishing Pads & Sponge Wheels
Diamond Polishing Pads & Sponge WheelsThese Diamond flexible polishing pads are suitable for shaping and polishing corner angle and the inside and outside arc of the stone surface. This Resin bond diamond polishing pads are made with top quality diamonds and resin. This is for high gloss finish on all the stones and is very economical.
These pads are available with colour coded velcro backing and can be bent or distorted freely and are available in various mesh / grit sizes.
Diamond Polishing Pads are made available in Grits 5000, 8000 & 12000.
Premium WoodCutter Blades
ProductCode
Application Size Brand
Dia Bore Teeth
CP430P Woodcutting 110 20 30 Clipper Premium
CP440P Woodcutting 110 20 40 Clipper Premium
CP540P Woodcutting 125 20 40 Clipper Premium
Product Application Size Grit Availability Brand
Code Dia Bore Thickness
CPM Marble and Granite 100 20 2.5 50, 100, 200, 400, 800, 100, 1200, 1500, 2000, 3000 Clipper
CPZ Marble and Granite 100 20 3 50, 100, 200, 400, 800, 100, 1200, 1500, 2000, 3000 Clipper Premium
ww
w.g
rin
dw
elln
ort
on
.co
m
This Electroplated Diamond Glass Saw Blade is designed to give fast, clean & chip-free cutting of glass and tiles with the smoothest edge available. This blade is used for cutting hard and ceramic tiles. This blade has a thin kerf and utilizes a small diamond grit to make your Glass and Tile Cutting smooth whether on Decorative Glass, Plate Glass or cutting Glass Tile.
ProductCode
Type Application Size Brand
Dia Bore Kerf
CPG100 Glass Cutter Tiles and Glass 100 20 1 Clipper
Glass Cutter Blade
Diamond Core Drill BitsDiamond Core Drill Bits are used for drilling holes for air-conditioned, water pipe, gas nozzle on the wall and floor and are also used for drilling wide range of hard to soft materials with or without steel reinforcing, cured and reinforced concrete, prestressed concrete, asphalt, brick, block, stone. Norton Diamond Core Bits are designed for fast drilling and maximum life with no damage on the wall.
Availability
l Product Code : CPK 6, 8, 10, 12, 16, 20, 25, 30, 35, 40, 45 mm Dia. with a length of 90 mm
l Product Code : CPJ 52, 76, 102, 127, 152 and 200 mm Dia. with a length of 450 mm
Adaptor can be made available based on requirement.
Construction Products Division, Leela Business Park, 5th Level, Andheri-Kurla Road, Mumbai - 400 059. India. Tel: 40212121, 40212168
Field Offices Phone Numbers: l Ahmedabad 66052564-65 l Bangalore 25587248, 25091145, 25585737 l Chennai 28252370/ 0336/ 0797 l Jamshedpur 2228432, 2227337 l Kolkata 40037837-50 l Ludhiana 2423650, 2425851
l Mumbai 40132578-97 l Noida 0120-4061800-99 l Pune 25510891-2-4, 25510876 l Secunderabad 27713040