Upload
dinhdat
View
230
Download
1
Embed Size (px)
Citation preview
RSTAB8
RFEM 5
News in
Content Page
1
2
3 3
2
2New Add-On Modules
Main Programs
Add-On Modules
5.05.0018 / 8.05.0018Version:
&
Dlubal Software GmbH Structural analysis and design software
(C) www.gbi-statik.de
New Features
New Features
1 New Add-On Modules
New
Featu
res
RFEM
RSTA
B
5Dlubal Software GmbH Structural analysis and design software
The add-on module RF-/TIMBER NBR performs the
ultimate and serviceability limit state design for
members according to the Brazilian timber
construction standard NBR 7190:1997.
In addition to the stress analyses, it is also possible
to perform stability analysis for members in
RF-/TIMBER NBR according to the equivalent
member method or the second order analysis.
RF-/TIMBER NBR
?
?
?
?
?
?Update of the French material standard for solid
timber to NF EN 338:2009-12
?
?
?
?
?
?
?
?
?
Search function in the material library
New type of member load: pipe internal pressure
Implementation of the steels from NS EN 1993-1-
1:2014-04 to the material library
New material "BauBuche" in the material library
Implementation of the ÖNORM B 1995-1-1:2014
to the material library as well as to the
combinatorics according to EN 1990 + EN 1995
Implementation of the member, surface and solid
bodies in the Project Navigator - Display
Implementation of the National Annexes of
Bulgaria, Cyprus and Latvia for the automatic
combinatorics according to EN 1990
Implementation of the National Annexes of
Portugal, Bulgaria, Cyprus and Ireland for the
automatic combinatorics according to EN 1990
+ EN1995
Implementation of the wind and snow generator
for Bulgaria
Extension of the global calculation parameters
concerning the handling of pipe internal pressure
(Bourdon effect)
Update of stainless steels according to Z-30.3-6
in the material library
Material library in Dutch
I-sections of Gerdau in the cross-section database
Interfaces to Revit 2016 as well as to Tekla 21
RFEM and RSTAB
2 New Features in the Main Programs
2
Visualization of the design results in RFEM
Search function in the material library
Member types in the Project Navigator - Display
5Dlubal Software GmbH Structural analysis and design software
?New member end release nonlinearity "Plastic
hinge" and "Scaffolding".
?Implementation of the feature „Nodal Restraints“
for easier simulation of e.g. diaphragms or stiff
planes
?Revision and improvement of the feature "Special
selection". It is now also possible to select loads
?Extension of the dialogue for gas volumes
?Release of further solving methods when using
nonlinear member end releases
?More possibilities for the output of the stresses
on members in the RFEM Results Navigator
(RF-STEEL license necessary)
?
?
?
?
Extension of the calculation parameters:
implementation of settings for cables and
membranes
Implementation of line releases
Import of the FE mesh from RF-IMP also for
calculations according to the linear static analysis
Release of the feature "Joints"
RFEM
?Implementation of the design formula
corresponding to the design
?Fading-out of all performed designs if torsional
load and cross-section class 4 are combined (by
x-location)
?Implementation of a control option for the
direction of the precamber in the details of the
module (as well all as in other STEEL modules
and in RF-/STEEL SIA, RF-/STEEL AISC,
RF-/ALUMINIUM etc.)
RF-/STEEL EC 3
3 New Features Add-On Modules
?Implementation of an option for the buckling
class of general cross-sections to the details of
the module
RF-/STEEL GB
3
Visualization of the design formula corresponding to the
design in STEEL EC3
Settings for cables and membranes
Dialogue for member end release nonlinearity "Plastic hinge”
New
Featu
res
RFEM
RSTA
B
5Dlubal Software GmbH Structural analysis and design software
4
?Release of the approach 2* according to
EN 1997-1 for determining the bearing
resistance for the calculation with the National
Annexes for Germany and Austria
?Implementation of a reinforcement mesh library
?Export and import of user-defined reinforcement
meshes
RF-/FUNDATION Pro
?
?
?
?
?
?
?
In RF-/DYNAM Pro, it is now possible to keep
existing results. This reduces the effort for
calculation because not all dynamic load cases
are calculated after each modification.
The input has been simplified for the time history
analysis. The drop-down menu has been changed
to a table format.
Definitions of time diagrams by using functions
Implementation of the current Australian
standard AS 1170.4 as well as of the Austrian NA
RSTAB:
Implementation of a direct integration
Masses on nodal supports and members with
elastic foundations but also on non-
supported nodes and members can be
deactivated (Option "Neglect masses" in the
detail settings)
RF-/DYNAM Pro
Keeping existing results in RF-DYNAM Pro
?Extension of the reinforcement mesh library with
American templates
RF-CONCRETE Surfaces
?Output of the roughness factors c and mue for
the design of the shear joint
?Optimization of the function "Defined link
spacings"
RF/-CONCRETE
New reinforcement mesh library in RF-FOUNDATION Pro
Definition of a time diagram by using functions in
RF-DYNAM Pro
New
Featu
res
RFEM
RSTA
B
5Dlubal Software GmbH Structural analysis and design software
?Improvement of the Results Navigator of
RF-/JOINTS (the results of different cases can now
be displayed simultaneously)
RF-/JOINTS - Modules
5
?Implementation of the ductility check
RF-/JOINTS Steel - Pinned
?Implementation of the modifications of Annex
A2 to EC 5
? Possibility to save the thickness and further
settings of the steel plate as default settings
? Graphical display of the dowel forces
? Optional adaptation of the average gross density
of the timber in the material library (thus, it is
possible to use other materials such as LVL or
BauBuche)
? User-defined definition of the contours of the
steel plates
? Reduction of the tensile strength according to
DIN EN section NA 8.1.6 (NA.4) is now also
possible in other National Annexes
? Optional export of the joint stiffness to RFEM
(thus, it is possible to calculate internal forces
taking account of the slip of the joint)
RF-/JOINTS Timber - Steel to Timber
?Revision of the table 1.6 for the climatic load
parameters
RF-GLASS
?Optional reduction of the shear strain
? Output of the shear stresses according to the
orthotropic direction possible
? Integration of the ÖNORM B 1995-1-1:2015-06
as well as of the National Annex of Portugal
? Update of the strengths and layers of the
producer Derix
RF-LAMINATE
Simultaneous display of different cases of RF-JOINTS in RFEM
Graphical display of the dowel forces in
RF-JOINTS Timber - Steel to Timber
Reduction of the shear strain in RF-LAMINATE
New
Featu
res
RFEM
RSTA
B
5Dlubal Software GmbH Structural analysis and design software
6
?Implementation of the National Annexes of
Lithuania and Malaysia
SHAPE-MASSIVE
?Adaptation of the factor kshape for the torsional
design according to EN 1995-1-1/A2
? Integration of ÖNORM B 1995-1-1:2015-06 as
well as of the NA of Norway NS EN 1995-1-1
? French standard NF EN 338:2009-12 in the
material library
RF-/TIMBER Pro
?Cross-sections of the company STEICO in the
material library
?Implementation of the National Annexes to EC 5
of Norway and Latvia
RF-/LIMITS
Cross-sections of the company STEICO in the limit library
New
Featu
res
RFEM
RSTA
B