Upload
foremost-canada
View
307
Download
3
Embed Size (px)
DESCRIPTION
Â
Citation preview
Full Line Catalogue
2pc Toilets6Lpf / 1.6GpfCarlin .................................................................. 3
Cody .................................................................. 5
Crista .................................................................. 7
4.8Lpf / 1.28GpfCarlin .................................................................. 9
Caven ................................................................ 11
Cody .................................................................. 13
Crista .................................................................. 15
Additional ComponenetsAdditional Components .................................. 17
6Lpf / 1.6Gpf or 3Lpf / 0.8GpfCarson ................................................................ 19
Camri .................................................................. 21
Cullen ................................................................. 23
3.8Lpf / 1GpfCadell................................................................. 25
Cato ................................................................... 27
Clancy ................................................................ 29
Case ................................................................... 31
Total ToiletsCarlin 6Lpf / 1.6 Gpf ......................................... 33
Carlin 4.8Lpf / 1.28Gpf ..................................... 35
Caven 4.8Lpf / 1.28Gpf .................................... 37
Cody 4.8Lpf / 1.28Gpf ...................................... 39
Crista 4.8Lpf / 1.28Gpf ...................................... 41
Carson 6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf ............ 43
1pc Toilets6Lpf / 1.6GpfChloe .................................................................. 45
Caden ................................................................ 47
1pc Toilets 4.8Lpf / 1.28GpfChloe .................................................................. 49
Caden ................................................................ 51
Caldwell ............................................................. 53
4.8Lpf / 1.28Gpf or 3Lpf / 0.8GpfClaire .................................................................. 55
Canby ................................................................ 57
Concealed Trapway 4.8Lpf / 1.28GpfCali ..................................................................... 59
Cayla .................................................................. 61
Toilet SeatsPlasticRound Front ....................................................... 63
Elongated Front ................................................ 65
BidetCale .................................................................... 67
Cambrie ............................................................. 69
Drop-In SinksCatalina ............................................................. 71
Cailyn ................................................................. 73
Curtis ................................................................... 75
Undermount SinksConnor ............................................................... 77
Calvin ................................................................. 79
Camden ............................................................ 81
Catena ............................................................... 83
Collette .............................................................. 85
Pedestal LavatoriesCaprice .............................................................. 87
Carley ................................................................. 89
Calena ............................................................... 91
Light Commercial ProductsCornell ................................................................ 93
Carlo ................................................................... 95
Carlton ............................................................... 97
Canata .............................................................. 99
Colter.................................................................. 101
Clay .................................................................... 103
Clark ................................................................... 105
Cleo .................................................................... 107
Chane ................................................................ 109
Caledon ............................................................. 111
Chelsea .............................................................. 113
Cassidy ............................................................... 115
Carmin ............................................................... 117
Clayton .............................................................. 119
Product Index
Issued: May 2014www.contrac.ca
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
3Revised: May 2014
6Lpf / 1.6Gpf 2pc Round FrontRegular Height
Carlin
• Low consumption toilet• 6Lpf / 1.6Gpf• Round front bowl• Vitreous china• 15½" Bowl height• Chrome tank lever• 12" (305mm) Rough-in• Refer to page 17 for additional tank
options• 2" Fully glazed ball pass trapway• Siphon jet flush action• Water surface (210mm x 156mm) 8¼" x 6¼"• 440mm(W) x 670mm(D) x 765mm(H)
17¼"(W) x 26⅜"(D) x 30⅛"(H)
• IAPMO cUPC• ASME A112.19.2 / CSA B45.1-2008• MaP tested 800g• LEED Compliant
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Shape of Toilet Seat:Round front (Not included)
800g
É P R E U V ET E S T E D
4722BFT - Bowl
4721BFT - Lined Tank
4721BFTU - Unlined Tank
Notes:The drawing below shows a rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*For additional component options and specifications, please visit www.contrac.ca*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· Low consumption toilet
· 6Lpf / 1.6Gpf
· Round front bowl
· Vitreous china
· 15½" Bowl height
· Chrome tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· Siphon jet flush action
· Water surface (210mm x 156mm) 8¼" x 6¼ "
· Toilet seat not included
Overall Dimensions:
440mm(W) x 670mm(D) x 765mm(H)
17¼"(W) x 26⅜"(D) x 30⅛"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
· MaP tested 800g
· LEED Compliant
Shipping:
Tank 1.93 cube 34 lbs (GW)
Bowl 3.38 cube 46 lbs (GW)
4722BFT Bowl4721BFT Lined Tank4721BFTU Unlined Tank
CARLIN6Lpf / 1.6Gpf 2PC ROUND FRONT
REGULAR HEIGHT
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Finished Wall
C/L of OutletFinished Floor
440mm(17¼")
350mm(13¾")
356mm(14")
235mm(9¼")
765mm(30⅛")
393mm(15½")
500mm(19⅝")305mm(12")
420mm(16½")
C/L of seat post holes140mm(5½")
670mm(26⅜")10mm(⅜")
630mm(25")
204mm(8")
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
5Revised: May 2014
6Lpf / 1.6Gpf 2pc ElongatedRegular Height
Cody4722BET - Bowl
4721BFT - Lined Tank
4721BFTU - Unlined Tank
• Low consumption toilet• 6Lpf / 1.6Gpf• Elongated bowl• Vitreous china• 15½" Bowl height• Chrome tank lever• 12" (305mm) Rough-in• Refer to page 17 for additional tank
options• 2" Fully glazed ball pass trapway• Siphon jet flush action• Water surface (218mm x 165mm) 8½" x 6½"• 440mm(W) x 725mm(D) x 760mm(H)
17¼"(W) x 28½"(D) x 30"(H)
• IAPMO cUPC• ASME A112.19.2 / CSA B45.1-2008• MaP tested 800g• LEED Compliant
Shape of Toilet Seat:Elongated (Not included)
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Notes:The drawing below shows a rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*For additional component options and specifications, please visit www.contrac.ca*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· Low consumption toilet
· 6Lpf / 1.6Gpf
· Elongated bowl
· Vitreous china
· 15½" Bowl height
· Chrome tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· Siphon jet flush action
· Water surface (218mm x 165mm) 8½" x 6½"
· Toilet seat not included
Overall Dimensions: 440mm(W) x 725mm(D) x 760mm(H)
17¼"(W) x 28½"(D) x 30"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
· MaP tested 800g
· LEED Compliant
Shipping:
Tank 1.93 cube 34 lbs (GW)
Bowl 3.58 cube 48 lbs (GW)
4722BET Bowl4721BFT Lined Tank4721BFTU Unlined Tank
CODY6Lpf / 1.6Gpf 2PC ELONGATED
REGULAR HEIGHT
520mm(20½")
440mm(17¼")
350mm(13¾")
356mm(14")
245mm(9⅝")
760mm(30")
393mm(15½")
725mm(28½")
C/L of Seat Post Holes140mm(5½")
690mm(27⅛")
Finished Floor
305mm(12")
C/L of Outlet
204mm(8")
Finished Wall
10mm(⅜")
470mm(18½")
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
7Revised: May 2014
6Lpf / 1.6Gpf 2pc 17" High Elongated
Crista4722BIT - Bowl
4721BFT - Lined Tank
4721BFTU - Unlined Tank
• Low consumption toilet• 6Lpf / 1.6Gpf• Elongated bowl• Vitreous china• 17" Bowl height• Chrome tank lever• 12" (305mm) Rough-in• Refer to page 17 for additional tank
options• 2" Fully glazed ball pass trapway• Siphon jet flush action• Water surface (240mm x 160mm) 9½" x 6¼"• 440mm(W) x 740mm(D) x 790mm(H)
17¼"(W) x 29⅛"(D) x 31"(H)
• IAPMO cUPC• ASME A112.19.2 / CSA B45.1-2008• ADA Guidelines & ANSI A117.1• MaP tested 800g• LEED Compliant
Shape of Toilet Seat:Elongated (Not included)
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Notes:The drawing below shows a rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to complywith the local disability codes and standards prior to installing the product.
*For additional component options and specifications, please visit www.contrac.ca*Bone and Biscuit available through Direct import (CIF) only.
4722BIT Bowl4721BFT Lined tank4721BFTU Unlined tank
Product Specs:
· Low consumption toilet · 6Lpf / 1.6Gpf · Elongated bowl · Vitreous china · 17" Bowl height · Chrome tank lever
· 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway · Siphon jet flush action
· Water surface (240mm x 160mm) 9½" x 6¼" · Toilet seat not included
Overall Dimensions: 440mm(W) x 740mm(D) x 790mm(H) 17¼"(W) x 29⅛"(D) x 31"(H)
Compliance Certifications:
Meets or exceeds the following: · IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008 · ADA Guidelines & ANSI A117.1 · MaP tested 800g · LEED Compliant
Shipping:
Tank 1.93 cube 34 lbs (GW)
Bowl 3.96 cube 50 lbs (GW)
CRISTA6Lpf / 1.6Gpf 2PC 17" HIGH ELONGATED
520mm(20½")
440mm(17¼")
350mm(13¾")
356mm(14")
245mm(9⅝")
790mm(31")
432mm(17")
740mm(29⅛")
C/L of Seat Post Holes140mm(5½")
470mm(18½")
695mm(27⅜")
Finished Floor
305mm(12")
C/L of Outlet
204mm(8")
10mm(⅜")
Finished Wall
Revised: January 2014CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551
www.contrac.ca
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
9Revised: May 2014
4.8Lpf / 1.28Gpf 2pc Round FrontRegular Height
Carlin4722BFV - Bowl
4721BFV - Lined Tank
4721BFVU - Unlined Tank
• High efficiency toilet• 4.8Lpf / 1.28Gpf• Round front bowl• Vitreous china• 15½" Bowl height• Chrome tank lever• 12" (305mm) Rough-in• Refer to page 17 for additional tank
options• 2" Fully glazed ball pass trapway• 3" Flapper• Siphon jet flush action• Water surface (209mm x 155mm) 8¼" x 6⅛"• 440mm(W) x 670mm(D) x 765mm(H)
17¼"(W) x 26⅜"(D) x 30⅛"(H)
• IAPMO cUPC• US EPA WaterSense• ASME A112.19.2 / CSA B45.1-2008• MaP tested 1000g• LEED Compliant
Shape of Toilet Seat:Round front (Not included)
1000g
É P R E U V ET E S T E D
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Notes:The drawing below shows a rough-in at a minimum dimension of 305mm (12") from finished wall to C/L ofoutlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibilityis assumed for use of superseded or voided pages.
*For additional component options and specifications, please visit www.contrac.ca*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· High efficiency toilet
· 4.8Lpf / 1.28Gpf
· Round front bowl
· Vitreous china
· 15½" Bowl height
· Chrome tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Water surface (209mm x 155mm) 8¼" x 6⅛"
· Toilet seat not included
Overall Dimensions:
440mm(W) x 670mm(D) x 765mm(H)
17¼"(W) x 26⅜"(D) x 30⅛"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 /
CSA B45.1-2008
· MaP tested 1000g
· LEED Compliant
Shipping:
Tank 1.93 cube 34 lbs (GW)
Bowl 3.38 cube 46 lbs (GW)
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
4722BFV Bowl4721BFV Lined Tank4721BFVU Unlined Tank
Finished Wall
C/L of OutletFinished Floor
440mm(17¼")
350mm(13¾")
356mm(14")
235mm(9¼")
765mm(30⅛")
393mm(15½")
500mm(19⅝")305mm(12")
420mm(16½")
C/L of seat post holes140mm(5½")
670mm(26⅜")10mm(⅜")
630mm(25")
204mm(8")
CARLIN4.8Lpf / 1.28Gpf 2PC ROUND FRONT
REGULAR HEIGHT
Revised: January 2014CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551
www.contrac.ca
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
11Revised: May 2014
Caven4722BRV - Bowl
4721BFV - Lined Tank
4721BFVU - Unlined Tank
• High efficiency toilet• 4.8Lpf / 1.28Gpf• Round front bowl• Vitreous china• 17" Bowl height• Chrome tank lever• 12" (305mm) Rough-in• Refer to page 17 for additional tank
options• 2" Fully glazed ball pass trapway• 3" Flapper• Siphon jet flush action• Water surface (220mm x 160mm) 8⅝" x 6¼"• 440mm(W) x 702mm(D) x 800mm(H)
17¼"(W) x 27⅝"(D) x 31½"(H)Shape of Toilet Seat:Round front (Not included)
4.8Lpf / 1.28Gpf 2pc17" High Round Front
• IAPMO cUPC• US EPA WaterSense• ASME A112.19.2 / CSA B45.1-2008• ADA Guidelines & ANSI A117.1• MaP tested 800g• LEED Compliant
800g
É P R E U V ET E S T E D
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Notes:The drawing below shows a rough-in at a minimum dimension of 305mm (12") from finished wall to C/L ofoutlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibilityis assumed for use of superseded or voided pages.
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to complywith the local disability codes and standards prior to installing the product.
*For additional component options and specifications, please visit www.contrac.ca*Bone and Biscuit available through Direct import (CIF) only.
Product Specs: · High efficiency toilet
· 4.8Lpf / 1.28Gpf
· Round front bowl
· Vitreous china
· 17" Bowl height
· Chrome tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Water surface (220mm x 160mm) 8⅝" x 6¼"
· Toilet seat not included
Overall Dimensions: 440mm(W) x 702mm(D) x 800mm(H)
17¼"(W) x 27⅝"(D) x 31½"(H)
Compliance Certifications: Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 /
CSA B45.1-2008
· ADA Guidelines &
ANSI A117.1
· MaP tested 800g
· LEED Compliant
Shipping:Tank 1.93 cube 34 lbs (GW)
Bowl 4.6 cube 56 lbs (GW)
4722BRV Bowl4721BFV Lined Tank4721BFVU Unlined Tank
FinishedWall
C/L of OutletFinished Floor
440mm(17¼")
350mm(13¾")
356mm(14")
247mm(9¾")
800mm(31½")
432mm(17")
528mm(20¾")305mm(12")
420mm(16½")
C/L of seat post holes140mm(5½")
702mm(27⅝")10mm(⅜")
660mm(26")
204mm(8")
CAVEN4.8Lpf / 1.28Gpf 2PC 17" HIGH ROUND FRONT
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
13Revised: May 2014
4.8Lpf / 1.28Gpf 2pc ElongatedRegular Height
Cody4722BEV - Bowl
4721BFV - Lined Tank
4721BFVU - Unlined Tank
• High efficiency toilet• 4.8Lpf / 1.28Gpf• Elongated bowl• Vitreous china• 15½" Bowl height• Chrome tank lever• 12" (305mm) Rough-in• Refer to page 17 for additional tank
options• 2" Fully glazed ball pass trapway• 3" Flapper• Siphon jet flush action• Water surface (216mm x 165mm) 8½" x 6½"• 440mm(W) x 725mm(D) x 760mm(H)
17¼"(W) x 28½"(D) x 30"(H)
• IAPMO cUPC• US EPA WaterSense• ASME A112.19.2 / CSA B45.1-2008• MaP tested 800g• LEED Compliant
800g
É P R E U V ET E S T E D
Shape of Toilet Seat:Elongated (Not included)
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Notes:
4722BEV Bowl4721BFV Lined Tank4721BFVU Unlined Tank
520mm(20½")
440mm(17¼")
350mm(13¾")
356mm(14")
245mm(9⅝")
760mm(30")
393mm(15½")
725mm(28½")
C/L of Seat Post Holes140mm(5½")
690mm(27⅛")
Finished Floor
305mm(12")
C/L of Outlet
204mm(8")
FinishedWall
10mm(⅜")
470mm(18½")
CODY4.8Lpf / 1.28Gpf 2PC ELONGATED
REGULAR HEIGHT
The drawing below shows a rough-in at a minimum dimension of 305mm (12") from finished wall to C/L ofoutlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibilityis assumed for use of superseded or voided pages.
*For additional component options and specifications, please visit www.contrac.ca*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· High efficiency toilet
· 4.8Lpf / 1.28Gpf
· Elongated bowl
· Vitreous china
· 15½" Bowl height
· Chrome tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Water surface (216mm x 165mm) 8½" x 6½"
· Toilet seat not included
Overall Dimensions:
440mm(W) x 725mm(D) x 760mm(H)
17¼"(W) x 28½"(D) x 30"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 /
CSA B45.1-2008
· MaP tested 800g
· LEED Compliant
Shipping:
Tank 1.93 cube 34 lbs (GW)
Bowl 3.58 cube 48 lbs (GW)
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
15Revised: May 2014
4.8Lpf / 1.28Gpf 2pc 17" High Elongated
Crista4722BHV - Bowl
4721BFV - Lined Tank
4721BFVU - Unlined Tank
• High efficiency toilet• 4.8Lpf / 1.28Gpf• Elongated bowl• Vitreous china• 17" Bowl height• Chrome tank lever• 12" (305mm) Rough-in• Refer to page 17 for additional tank
options• 2" Fully glazed ball pass trapway• 3" Flapper• Siphon jet flush action• Water surface (216mm x 155mm) 8½" x 6⅛"• 440mm(W) x 740mm(D) x 790mm(H)
17¼"(W) x 29⅛"(D) x 31"(H)
• IAPMO cUPC• US EPA WaterSense• ASME A112.19.2 / CSA B45.1-2008• ADA Guidelines & ANSI A117.1• MaP tested 1000g• LEED Compliant
1000g
É P R E U V ET E S T E D
Shape of Toilet Seat:Elongated (Not included)
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Notes:The drawing below shows a rough-in at a minimum dimension of 305mm (12") from finished wall to C/L ofoutlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibilityis assumed for use of superseded or voided pages.
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to complywith the local disability codes and standards prior to installing the product.
*For additional component options and specifications, please visit www.contrac.ca*Bone and Biscuit available through Direct import (CIF) only.
4722BHV Bowl4721BFV Lined Tank4721BFVU Unlined Tank
Product Specs: · High efficiency toilet
· 4.8Lpf / 1.28Gpf
· Elongated bowl
· Vitreous china
· 17" Bowl height
· Chrome tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Water surface (216mm x 155mm) 8½" x 6⅛"
· Toilet seat not included
Overall Dimensions: 440mm(W) x 740mm(D) x 790mm(H)
17¼"(W) x 29⅛"(D) x 31"(H)
Compliance Certifications: Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 /
CSA B45.1-2008
· ADA Guidelines &
ANSI A117.1
· MaP tested 1000g
· LEED Compliant
Shipping:Tank 1.93 cube 34 lbs (GW)
Bowl 3.96 cube 50 lbs (GW)
520mm(20½")
440mm(17¼")
350mm(13¾")
356mm(14")
245mm(9⅝")
790mm(31")
432mm(17")
740mm(29⅛")
C/L of Seat Post Holes140mm(5½")
470mm(18½")
695mm(27⅜")
Finished Floor
305mm(12")
C/L of Outlet
204mm(8")
10mm(⅜")
Finished Wall
CRISTA4.8Lpf / 1.28Gpf 2PC 17" HIGH ELONGATED
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca 17The images shown are a representation of the finish and color, and may not reflect every characteristic possiblBone and Biscuit available through Direct import (CIF) only.
www.contrac.ca 17
Additional Components
Right Hand Lever
4721BFTU-RHUnlined Tank
Low Profile Tank
4721BFVU-LTUnlined Tank
10" Rough-In
4700BFT Lined Tank4700BFTU
Unlined Tank
14" Rough-In
4724BFTLined Tank4724BFTU
Unlined Tank
10" Rough-In
4700BFVU Unlined Tank
14" Rough-In
4724BFV Lined Tank4724BFVU
Unlined Tank
• Soft White vitreous china.• All 6Lpf/1.6Gpf tanks are compatible with 6Lpf/1.6Gpf Carlin, Cody and Crista toilet bowls excluding Total
Toilet models.
Locking Tank
4721BFT-LLined Tank4721BFTU-L
Unlined Tank
Right Hand Lever
4721BFVU-RHUnlined Tank
6Lpf / 1.6Gpf Tanks
4.8Lpf / 1.28Gpf Tanks
Locking Tank
4721BFV-LLined Tank4721BFVU-L
Unlined Tank
*For further details and specifications, please visit www.contrac.ca
• Soft White vitreous china.• All 4.8Lpf/1.28Gpf tanks are compatible with 4.8Lpf/1.28Gpf Carlin, Caven, Cody and Crista toilet bowls
excluding Total Toilet models.
Revised: January 2014
© Copyright Contrac® 2014. All rights reserved.
This page intentionally left blank.
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
19Revised: May 2014
6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf 2pcRound Front Dual Flush Regular Height
Carson4720BFWLined Tank / Bowl
4720BFWUUnlined Tank / Bowl
• High efficiency dual flush toilet• 6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf• Round front bowl• Vitreous china• 15½" Bowl height• Soft white top push button• 12" (305mm) Rough-in• 1¾" Fully glazed ball pass trapway• 3" Dual flush valve• Siphon jet flush action• Water surface (225mm x 160mm) 8⅞" x 6¼"• 440mm(W) x 690mm(D) x 805mm(H) 17¼"(W) x 27⅛"(D) x 31⅝"(H)
• IAPMO cUPC• US EPA WaterSense• ASME A112.19.2 / CSA B45.1-2008• MaP tested 1000g (Lined tank)• MaP tested 800g (Unlined tank)• LEED Compliant
Shape of Toilet Seat:Round front (Not included)
1000g
É P R E U V ET E S T E D
(Lined Tank)
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L ofoutlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibilityis assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· High efficiency dual flush toilet
· 6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf
· Round front bowl
· Vitreous china
· 15½" Bowl height
· Soft white top push button
· 12" (305mm) Rough-in
· 1¾" Fully glazed ball pass trapway
· 3" Dual flush valve
· Siphon jet flush action
· Water surface (225mm x 160mm) 8⅞" x 6¼"
· Toilet seat not included
Overall Dimensions:
440mm(W) x 690mm(D) x 805mm(H)
17¼"(W) x 27⅛"(D) x 31⅝"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 /
CSA B45.1-2008
· MaP tested 1000g
(Lined tank)
· MaP tested 800g
(Unlined tank)
· LEED Compliant
Shipping:
Cube 6.08
GW 78 lbs
4720BFW Lined Tank
4720BFWU Unlined Tank
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
440mm(17¼")
356mm(14")
356mm(14")
252mm(9⅞")
395mm(15½")
805mm(31⅝")
Finished Floor C/L of Outlet
530mm(20⅞")305mm(12")
420mm(16½")
657mm(25⅞")
690mm(27⅛")204mm(8")
Finished Wall
C/L of Seat Post Holes140mm(5½")
10mm(⅜")
CARSON6Lpf / 1.6Gpf OR 3Lpf / 0.8Gpf 2PC ROUND FRONT
DUAL FLUSH REGULAR HEIGHT
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
21Revised: May 2014
6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf2pc Elongated Dual Flush Regular Height
Camri4720BEWLined Tank / Bowl
4720BEWUUnlined Tank / Bowl
• High efficiency dual flush toilet• 6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf• Elongated bowl• Vitreous china• 15½" Bowl height• Soft white top push button• 12" (305mm) Rough-in• 1¾" Fully glazed ball pass trapway• 3" Dual flush valve• Siphon jet flush action• Water Surface (205mm x 150mm) 8" x 6"• 440mm(W) x 743mm(D) x 803mm(H) 17¼"(W) x 29¼"(D) x 31⅝"(H)
• IAPMO cUPC• US EPA WaterSense• ASME A112.19.2 / CSA B45.1-2008• MaP tested 800g• LEED Compliant
800g
É P R E U V ET E S T E D
Shape of Toilet Seat:Elongated (Not included)
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Notes:
4720BEW Lined Tank
4720BEWU Unlined Tank
440mm(17¼")
356mm(14")
803mm(31⅝")
253mm(9⅞")
356mm(14¼")
305mm(12")
395mm(15½")
743mm(29¼")
C/L of Seatpost holes
140mm(5½")
470mm(18½")
10mm(⅜")
719mm(28⅞")
205mm(7⅞")
515mm(20¼")
Finished Wall
C/L of OutletFinished Floor
CAMRI6Lpf / 1.6Gpf OR 3Lpf / 0.8Gpf 2PC ELONGATED
DUAL FLUSH REGULAR HEIGHT
Product Specs:
· High efficiency dual flush toilet
· 6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf
· Elongated bowl
· Vitreous china
· 15½" Bowl height
· Soft white top push button
· 12" (305mm) Rough-in
· 1¾" Fully glazed ball pass trapway
· 3" Dual flush valve
· Siphon jet flush action
· Water Surface (205mm x 150mm) 8" x 6"
· Toilet seat not included
Overall Dimensions:
440mm(W) x 743mm(D) x 803mm(H)
17¼"(W) x 29¼"(D) x 31⅝"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 /
CSA B45.1-2008
· MaP tested 800g
· LEED Compliant
Shipping:Cube 6.54
GW 86 lbs
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L ofoutlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibilityis assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
23Revised: May 2014
6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf2pc 17" High Elongated Dual Flush
Cullen4720BIWLined Tank / Bowl
4720BIWUUnlined Tank / Bowl
• High efficiency dual flush toilet• 6Lpf / 1.6Gpf or 3.0Lpf / 0.8Gpf• Elongated bowl• Vitreous china• 17" Bowl height• Soft white top push button• 12" (305mm) Rough-in• 1¾" Fully glazed ball pass trapway• 3" Dual flush valve• Siphon jet flush action• Water surface (240mm x 165mm) 9½" x 6½"• 440mm(W) x 750mm(D) x 800mm(H) 17¼"(W) x 29½"(D) x 31½"(H)
• IAPMO cUPC• US EPA WaterSense• ASME A112.19.2 / CSA B45.1-2008• MaP tested 800g• LEED Compliant
800g
É P R E U V ET E S T E D
Shape of Toilet Seat:Elongated (Not included)
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
4720BIW Lined Tank
4720BIWU Unlined Tank
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
10mm(⅜")
305mm(12")
440mm(17¼")
800mm(31½")
432mm(17")
C/L of Seatpost holes
140mm(5½")
750mm(29½")
470mm(18½")
531mm(21")
717mm(28¼")
205mm(8")
356mm(14")
356mm(14")
255mm(10")
Finished Floor
Finished Wall
C/L of Outlet
Product Specs:
· High efficiency dual flush toilet
· 6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf
· Elongated bowl
· Vitreous china
· 17" Bowl height
· Soft white top push button
· 12" (305mm) Rough-in
· 1¾" Fully glazed ball pass trapway
· 3" Dual flush valve
· Siphon jet flush action
· Water surface (240mm x 165mm) 9½" x 6½"
· Toilet seat not included
Overall Dimensions:
440mm(W) x 750mm(D) x 800mm(H)
17¼"(W) x 29½"(D) x 31½"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 / CSA B45.1-2008
· MaP tested 800g
· LEED Compliant
Shipping:
Cube 6.88
GW 89.23 lbs
CULLEN6Lpf / 1.6Gpf OR 3Lpf / 0.8Gpf
2PC 17" HIGH ELONGATED DUAL FLUSH
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
25Revised: May 2014
3.8Lpf / 1Gpf 2pcRound Front Regular Height
Cadell5730BFV - Lined Tank / Bowl
5730BFVU - Unlined Tank / Bowl
• High efficiency toilet• 3.8Lpf / 1Gpf• Round front bowl• Vitreous china• 15½" Bowl height• Soft white tank lever• 12" (305mm) Rough-in• 1¾" Fully glazed ball pass trapway• 3" Flapper• Siphon jet flush action• Water surface (225mm x 160mm) 8⅞" x 6¼"• 440mm(W) x 690mm(D) x 803mm(H) 17¼"(W) x 27⅛"(D) x 31⅝"(H)
• IAPMO cUPC• US EPA WaterSense• ASME A112.19.2 / CSA B45.1-2008• MaP tested 800g• MaP Premium certified• LEED Compliant
Shape of Toilet Seat:Round front (Not included)
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Running change for square foot print
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L ofoutlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibilityis assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· High efficiency toilet
· 3.8Lpf / 1Gpf
· Round front bowl
· Vitreous china
· 15½" Bowl height
· Soft white tank lever
· 12" (305mm) Rough-in
· 1¾" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Water surface (225mm x 160mm) 8⅞" x 6¼"
· Toilet seat not included
Overall Dimensions:
440mm(W) x 690mm(D) x 803mm(H)
17¼"(W) x 27⅛"(D) x 31⅝"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 / CSA B45.1-2008
· MaP tested 800g
· MaP Premium certified
· LEED Compliant
Shipping:
Cube 6.08
GW 97 lbs
Notes:
5730BFV Lined Tank5730BFVU Unlined Tank
440mm(17¼")
803mm(31⅝")
250mm(9⅞")
356mm(14")
690mm(27⅛")
530mm(20⅞")
356mm(14")
394mm(15½")
C/L of Seatpost holes
140mm (5½")
420mm(16½")
10mm(⅜")202mm(8")
657mm(25⅝")
Finished wall
C/L of OutletFinished floor
305mm(12")
CADELL3.8Lpf / 1Gpf 2PC ROUND FRONT
REGULAR HEIGHT
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: May 2014
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
27Revised: May 2014
3.8Lpf / 1Gpf 2pcElongated Regular Height
Cato5730BEV - Lined Tank / Bowl
5730BEVU - Unlined Tank / Bowl
• High efficiency toilet• 3.8Lpf / 1Gpf• Elongated bowl• Vitreous china• 15½" Bowl height• Soft white tank lever• 12" (305mm) Rough-in• 1¾" Fully glazed ball pass trapway• 3" Flapper• Siphon jet flush action• Water surface (205mm x 150mm) 8" x 6"• 440mm(W) x 744mm(D) x 803mm(H) 17¼"(W) x 29¼"(D) x 31½"(H)
• IAPMO cUPC• US EPA WaterSense• ASME A112.19.2 / CSA B45.1-2008• MaP tested 800g• MaP Premium certified• LEED Compliant
Shape of Toilet Seat:Elongated (Not included)
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Notes:
5730BEV Lined Tank5730BEVU Unlined Tank
440mm(17¼")
356mm(14")
803mm(31½")
392mm(15½")
744mm(29¼")
C/L of Seatpost holes
140mm (5½")
470mm(18½")
356mm(14")
253mm(9⅞") 515mm(20¼")
10mm(⅜")202mm(8")
719mm(28⅜")
Finished wall
C/L of OutletFinished floor
305mm(12")
Product Specs:
· High efficiency toilet
· 3.8Lpf / 1Gpf
· Elongated bowl
· Vitreous china
· 15½" Bowl height
· Soft white tank lever
· 12" (305mm) Rough-in
· 1¾" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Water surface (205mm x 150mm) 8" x 6"
· Toilet seat not included
Overall Dimensions:
440mm(W) x 744mm(D) x 803mm(H)
17¼"(W) x 29¼"(D) x 31½"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 /
CSA B45.1-2008
· MaP tested 800g
· MaP Premium certified
· LEED Compliant
Shipping:
Cube 6.54
GW 92 lbs
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L ofoutlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibilityis assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
CATO3.8Lpf / 1Gpf 2PC ELONGATED
REGULAR HEIGHT
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: May 2014
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
29Revised: May 2014
3.8Lpf / 1Gpf 2pc17" High Round Front
Clancy5730BIV - Lined Tank / Bowl
5730BIVU - Unlined Tank / Bowl
• High efficiency toilet• 3.8Lpf / 1Gpf• Round front bowl• Vitreous china• 17" Bowl height• Soft white tank lever• 12" (305mm) Rough-in• 1¾" Fully glazed ball pass trapway• 3" Flapper• Siphon jet flush action• Water Surface (220mm x 160mm) 8⅝" x 6¼"• 440mm(W) x 702mm(D) x 800mm(H) 17¼"(W) x 27⅝"(D) x 31½"(H)
• IAPMO cUPC• US EPA WaterSense• ASME A112.19.2 / CSA B45.1-2008• ADA Guidelines & ANSI A117.1• MaP tested 600g• MaP Premium certified• LEED Compliant
Shape of Toilet Seat:Round front (Not included)
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Running change for square foot print
Product Specs:
· High efficiency toilet
· 3.8Lpf / 1Gpf
· Round front bowl
· Vitreous china
· 17" Bowl height
· Soft white tank lever
· 12" (305mm) Rough-in
· 1¾" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Water Surface (220mm x 160mm) 8⅝" x 6¼"
· Toilet seat not included
Overall Dimensions:
440mm(W) x 702mm(D) x 800mm(H)
17¼"(W) x 27⅝"(D) x 31½"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 / CSA B45.1-2008
· ADA Guidelines & ANSI A117.1
· MaP Tested 600g
· MaP Premium certified
· LEED Compliant
Shipping:
Cube 6.38
GW 89 lbs
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Products are designed to comply ADA / ANSI A117.1 Standard. It shall be the responsibility of the installer to complywith the local disability codes and standards prior to installing the product.
*Bone and Biscuit available through Direct import (CIF) only.
5730BIV Lined Tank5730BIVU Unlined Tank
CLANCY3.8Lpf / 1Gpf 2PC 17" HIGH ROUND FRONT
305mm(12")
440mm(17¼")
356mm(14")
800mm(31½")
430mm(17")
702mm(27⅝")
C/L of Seatpost holes
140mm (5½")
420mm(16½")
356mm(14")
245mm(9⅝" ) 528mm(20⅞")
10mm(⅜")
202mm(8")
660mm(26")
Finished wall
C/L of OutletFinished floor
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
31Revised: May 2014
3.8Lpf / 1Gpf 2pc17" High Elongated
Case5730BOV - Lined Tank / Bowl
5730BOVU - Unlined Tank / Bowl
• High efficiency toilet• 3.8Lpf / 1Gpf• Elongated bowl• Vitreous china• 17" Bowl height• Soft white tank lever• 12" (305mm) Rough-in• 1¾" Fully glazed ball pass trapway• 3" Flapper• Siphon jet flush action• Water Surface (220mm x 170mm) 8⅝" x 6⅝"• 440mm(W) x 754mm(D) x 802mm(H) 17¼"(W) x 29⅝"(D) x 31½"(H)
• IAPMO cUPC• US EPA WaterSense• ASME A112.19.2 / CSA B45.1-2008• ADA Guidelines & ANSI A117.1• MaP tested 600g• MaP Premium certified• LEED Compliant
Shape of Toilet Seat:Elongated (Not included)
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· High efficiency toilet
· 3.8Lpf / 1Gpf
· Elongated bowl
· Vitreous china
· 17" Bowl height
· Soft white tank lever
· 12" (305mm) Rough-in
· 1¾" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Water Surface (220mm x 170mm) 8⅝" x 6⅝"
· Toilet seat not included
Overall Dimensions:
440mm(W) x 754mm(D) x 802mm(H)
17¼"(W) x 29⅝"(D) x 31½"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 / CSA B45.1-2008
· ADA Guidelines & ANSI A117.1
· MaP Tested 600g
· MaP Premium certified
· LEED Compliant
Shipping:
Cube 6.9
GW 91 lbs
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Products are designed to comply ADA / ANSI A117.1 Standard. It shall be the responsibility of the installer to complywith the local disability codes and standards prior to installing the product.
*Bone and Biscuit available through Direct import (CIF) only.
5730BOV Lined Tank5730BOVU Unlined Tank
CASE3.8Lpf / 1Gpf 2PC 17" HIGH ELONGATED
305mm(12")
440mm(17¼")
356mm(14")
802mm(31½")
430mm(17")
754mm(29⅝")
C/L of Seatpost holes
140mm (5½")
470mm(18½")
356mm(14")
250mm(9⅞" ) 531mm(21")
10mm(⅜")
202mm(8")
717mm(28")
Finished wall
C/L of OutletFinished floor
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
33Revised: May 2014
6Lpf / 1.6Gpf 2pc Round FrontRegular Height
Total Toilet Carlin4720BFT-TT Lined Tank / Bowl
• Low consumption toilet• 6Lpf / 1.6Gpf• Round front bowl• Vitreous china• 15½" Bowl height• Chrome tank lever• 12" (305mm) Rough-in• 2" Fully glazed ball pass trapway• Siphon jet flush action• Water surface (210mm x 156mm) 8¼" x 6¼"• Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat• 440mm(W) x 670mm(D) x 765mm(H) 17¼"(W) x 26⅝"(D) x 30⅛"(H)
• IAPMO cUPC• ASME A112.19.2 / CSA B45.1-2008• MaP tested 800g• LEED Compliant
Shape of Toilet Seat:Round front (Included)
800g
É P R E U V ET E S T E D
Direct import (CIF) only - Please contact your sales representative for further information.
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· Low consumption toilet
· 6Lpf / 1.6Gpf
· Round front bowl
· Vitreous china
· 15½" Bowl height
· Chrome tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· Siphon jet flush action
· Water surface (210mm x 156mm) 8¼" x 6¼ "
· Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat
Overall Dimensions:
440mm(W) x 670mm(D) x 765mm(H)
17¼"(W) x 26⅝"(D) x 30⅛"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
· MaP tested 800g
· LEED Compliant
Shipping:
Cube 5.89
GW 80 lbs
4720BFT-TT Lined TankDirect Import (CIF) Only
TOTAL TOILET CARLIN6Lpf / 1.6Gpf 2PC ROUND FRONT
REGULAR HEIGHT
Finished Wall
C/L of OutletFinished Floor
440mm(17¼")
350mm(13¾")
356mm(14")
235mm(9¼")
765mm(30⅛")
393mm(15½")
500mm(19⅝")305mm(12")
420mm(16½")
C/L of seat post holes140mm(5½")
670mm(26⅝")10mm(⅜")
630mm(25")
204mm(8")
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
35Revised: May 2014
4.8Lpf / 1.28Gpf 2pc Round FrontRegular Height
Total Toilet Carlin4720BFV-TT Lined Tank / Bowl
• High efficiency toilet• 4.8Lpf / 1.28Gpf• Round front bowl• Vitreous china• 15½" Bowl height• Chrome tank lever• 12" (305mm) Rough-in• 2" Fully glazed ball pass trapway• 3" Flapper• Siphon jet flush action• Water surface (209mm x 155mm) 8¼" x 6⅛"• Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat• 440mm(W) x 670mm(D) x 765mm(H) 17¼"(W) x 26⅜"(D) x 30⅛"(H)
• IAPMO cUPC• US EPA WaterSense• ASME A112.19.2 / CSA B45.1-2008• MaP tested 1000g• LEED Compliant
Shape of Toilet Seat:Round front (Included)
1000g
É P R E U V ET E S T E D
Direct import (CIF) only - Please contact your sales representative for further information.
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L ofoutlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibilityis assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· High efficiency toilet
· 4.8Lpf / 1.28Gpf
· Round front bowl
· Vitreous china
· 15½" Bowl height
· Chrome tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Water surface (209mm x 155mm) 8¼" x 6⅛"
· Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat
Overall Dimensions:
440mm(W) x 670mm(D) x 765mm(H)
17¼"(W) x 26⅜"(D) x 30⅛"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 /
CSA B45.1-2008
· MaP tested 1000g
· LEED Compliant
Shipping:
Cube 5.89
GW 80 lbs
4720BFV-TT Lined TankDirect Import (CIF) Only
Finished Wall
C/L of OutletFinished Floor
440mm(17¼")
350mm(13¾")
356mm(14")
235mm(9¼")
765mm(30⅛")
393mm(15½")
500mm(19⅝")305mm(12")
420mm(16½")
C/L of seat post holes140mm(5½")
670mm(26⅜")10mm(⅜")
630mm(25")
204mm(8")
TOTAL TOILET CARLIN4.8Lpf / 1.28Gpf 2PC ROUND FRONT
REGULAR HEIGHT
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
37Revised: May 2014
Total Toilet Caven4720BRV-TT Lined Tank / Bowl
• High efficiency toilet• 4.8Lpf / 1.28Gpf• Round front bowl• Vitreous china• 17" Bowl height• Chrome tank lever• 12" (305mm) Rough-in• 2" Fully glazed ball pass trapway• 3" Flapper• Siphon jet flush action• Water surface (220mm x 160mm) 8⅝" x 6¼"• Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat• 440mm(W) x 702mm(D) x 800mm(H) 17¼"(W) x 27⅝"(D) x 31½"(H)
Shape of Toilet Seat:Round front (Included)
4.8Lpf / 1.28Gpf 2pc17" High Round Front
• IAPMO cUPC• US EPA WaterSense• ASME A112.19.2 / CSA B45.1-2008• ADA Guidelines & ANSI A117.1• MaP tested 800g• LEED Compliant
800g
É P R E U V ET E S T E D
Direct import (CIF) only - Please contact your sales representative for further information.
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L ofoutlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibilityis assumed for use of superseded or voided pages.
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to complywith the local disability codes and standards prior to installing the product.
*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· High efficiency toilet
· 4.8Lpf / 1.28Gpf
· Round front bowl
· Vitreous china
· 17" Bowl height
· Chrome tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Water surface (220mm x 160mm) 8⅝" x 6¼"
· Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat
Overall Dimensions:
440mm(W) x 702mm(D) x 800mm(H)
17¼"(W) x 27⅝"(D) x 31½"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 /
CSA B45.1-2008
· ADA Guidelines &
ANSI A117.1
· MaP tested 800g
· LEED Compliant
Shipping:
Cube 6.38
GW 89 lbs
4720BRV-TT Lined TankDirect Import (CIF) Only
Finished Wall
C/L of OutletFinished Floor
440mm(17¼")
350mm(13¾")
356mm(14")
247mm(9¾")
800mm(31½")
432mm(17")
528mm(20¾")305mm(12")
420mm(16½")
C/L of seat post holes140mm(5½")
702mm(27⅝")10mm(⅜")
660mm(26")
204mm(8")
TOTAL TOILET CAVEN4.8Lpf / 1.28Gpf 2PC 17" HIGH ROUND FRONT
445mm(17½")
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
39Revised: May 2014
4.8Lpf / 1.28Gpf 2pc ElongatedRegular Height
Total Toilet Cody4720BEV-TT Lined Tank / Bowl
• High efficiency toilet• 4.8Lpf / 1.28Gpf• Elongated bowl• Vitreous china• 15½" Bowl height• Chrome tank lever• 12" (305mm) Rough-in• 2" Fully glazed ball pass trapway• 3" Flapper• Siphon jet flush action• Water surface (216mm x 165mm) 8½" x 6½"• Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat• 440mm(W) x 725mm(D) x 760mm(H) 17¼"(W) x 28½"(D) x 30"(H)
• IAPMO cUPC• US EPA WaterSense• ASME A112.19.2 / CSA B45.1-2008• MaP tested 800g• LEED Compliant
800g
É P R E U V ET E S T E D
Shape of Toilet Seat:Elongated (Included)
Direct import (CIF) only - Please contact your sales representative for further information.
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Notes:
4720BEV-TT Lined TankDirect Import (CIF) Only
520mm(20½")
440mm(17¼")
350mm(13¾")
356mm(14")
245mm(9⅝")
760mm(30")
393mm(15½")
725mm(28½")
C/L of Seat Post Holes140mm(5½")
690mm(27⅛")
Finished Floor
305mm(12")
C/L of Outlet
204mm(8")
Finished Wall
10mm(⅜")
470mm(18½")
TOTAL TOILET CODY4.8Lpf / 1.28Gpf 2PC ELONGATED
REGULAR HEIGHT
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L ofoutlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibilityis assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· High efficiency toilet
· 4.8Lpf / 1.28Gpf
· Elongated bowl
· Vitreous china
· 15½" Bowl height
· Chrome tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Water surface (216mm x 165mm) 8½" x 6½"
· Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat
Overall Dimensions:
440mm(W) x 725mm(D) x 760mm(H)
17¼"(W) x 28½"(D) x 30"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 /
CSA B45.1-2008
· MaP tested 800g
· LEED Compliant
Shipping:
Cube 6.51
GW 89 lbs
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
41Revised: May 2014
4.8Lpf / 1.28Gpf 2pc 17" High Elongated
Total Toilet Crista4720BHV-TT Lined Tank / Bowl
• High efficiency toilet• 4.8Lpf / 1.28Gpf• Elongated bowl• Vitreous china• 17" Bowl height• Chrome tank lever• 12" (305mm) Rough-in• 2" Fully glazed ball pass trapway• 3" Flapper• Siphon jet flush action• Water surface (216mm x 155mm) 8½" x 6⅛"• Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat• 440mm(W) x 740mm(D) x 790mm(H) 17¼"(W) x 29⅛"(D) x 31"(H)
• IAPMO cUPC• US EPA WaterSense• ASME A112.19.2 / CSA B45.1-2008• ADA Guidelines & ANSI A117.1• MaP tested 1000g• LEED Compliant
1000g
É P R E U V ET E S T E D
Shape of Toilet Seat:Elongated (Included)
Direct import (CIF) only - Please contact your sales representative for further information.
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L ofoutlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibilityis assumed for use of superseded or voided pages.
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to complywith the local disability codes and standards prior to installing the product.
*Bone and Biscuit available through Direct import (CIF) only.
4720BHV-TT Lined TankDirect Import (CIF) Only
Product Specs:
· High efficiency toilet
· 4.8Lpf / 1.28Gpf
· Elongated bowl
· Vitreous china
· 17" Bowl height
· Chrome tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Water surface (216mm x 155mm) 8½" x 6⅛"
· Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat
Overall Dimensions:
440mm(W) x 740mm(D) x 790mm(H)
17¼"(W) x 29⅛"(D) x 31"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 /
CSA B45.1-2008
· ADA Guidelines &
ANSI A117.1
· MaP tested 1000g
· LEED Compliant
Shipping:
Cube 7.0
GW 91 lbs
520mm(20½")
440mm(17¼")
350mm(13¾")
356mm(14")
245mm(9⅝")
790mm(31")
432mm(17")
740mm(29⅛")
C/L of Seat Post Holes140mm(5½")
470mm(18½")
695mm(27⅜")
Finished Floor
305mm(12")
C/L of Outlet
204mm(8")
10mm(⅜")
Finished Wall
TOTAL TOILET CRISTA4.8Lpf / 1.28Gpf 2PC 17" HIGH ELONGATED
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
43Revised: May 2014
6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf 2pcRound Front Dual Flush Regular Height
Total Toilet Carson4720BFW-TTLined Tank / Bowl
• High efficiency dual flush toilet• 6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf• Round front bowl• Vitreous china• 15½" Bowl height• Soft white top push button• 12" (305mm) Rough-in• 1¾" Fully glazed ball pass trapway• 3" Dual flush valve• Siphon jet flush action• Water surface (225mm x 160mm) 8⅞" x 6¼"• Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat• 440mm(W) x 690mm(D) x 805mm(H) 17¼"(W) x 27⅛"(D) x 31⅝"(H)
• IAPMO cUPC• US EPA WaterSense• ASME A112.19.2 / CSA B45.1-2008• MaP tested 1000g• LEED Compliant
Shape of Toilet Seat:Round front (Included)
1000g
É P R E U V ET E S T E D
Direct import (CIF) only - Please contact your sales representative for further information.
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L ofoutlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibilityis assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· High efficiency dual flush toilet
· 6Lpf / 1.6Gpf or 3Lpf / 0.8Gpf
· Round front bowl
· Vitreous china
· 15½" Bowl height
· Soft white top push button
· 12" (305mm) Rough-in
· 1¾" Fully glazed ball pass trapway
· 3" Dual flush valve
· Siphon jet flush action
· Water surface (225mm x 160mm) 8⅞" x 6¼"
· Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat
Overall Dimensions:
440mm(W) x 690mm(D) x 805mm(H)
17¼"(W) x 27⅛"(D) x 31⅝"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 /
CSA B45.1-2008
· MaP tested 1000g
· LEED Compliant
Shipping:
Cube 6.08
GW 78 lbs
4720BFW-TT Lined TankDirect Import (CIF) Only
440mm(17¼")
356mm(14")
356mm(14")
252mm(9⅞")
395mm(15½")
805mm(31⅝")
Finished Floor C/L of Outlet
530mm(20⅞")305mm(12")
420mm(16½")
657mm(25⅞")
690mm(27⅛")204mm(8")
Finished Wall
C/L of Seat Post Holes140mm(5½")
10mm(⅜")
TOTAL TOILET CARSON6Lpf / 1.6Gpf OR 3Lpf / 0.8Gpf 2PC ROUND FRONT
DUAL FLUSH REGULAR HEIGHT
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
45Revised: May 2014
6Lpf / 1.6Gpf 1pc Round FrontRegular Height
Chloe5710BFT - Lined Tank
5710BFTU - Unlined Tank* *(Direct import (CIF) only - Please contact your sales representative for further information.)
• Low consumption toilet• 6Lpf / 1.6Gpf• Round front bowl• Vitreous china• 15¾" Bowl height• Chrome tank lever• 12" (305mm) Rough-in• 2" Fully glazed ball pass trapway• Siphon jet flush action• Water Surface (200mm x 150mm) 7⅞" x 6"• 429mm(W) x 672mm(D) x 689mm(H) 16⅞"(W) x 26½"(D) x 27⅛"(H)
• IAPMO cUPC• ASME A112.19.2 / CSA B45.1-2008• MaP tested 600g• LEED Compliant
Shape of Toilet Seat:Round front (Not included)
600g
É P R E U V ET E S T E D
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· Low consumption toilet
· 6Lpf / 1.6Gpf
· Round front bowl
· Vitreous china
· 15¾" Bowl height
· Chrome tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· Siphon jet flush action
· Water surface (200mm x 150mm) 7⅞" x 6"
· Toilet seat not included
Overall Dimensions:
429mm(W) x 672mm(D) x 689mm(H)
16⅞"(W) x 26½"(D) x 27⅛"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
· MaP tested 600g
· LEED Compliant
Shipping:
Cube 7.48
GW 83 lbs
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
CHLOE6Lpf / 1.6Gpf 1PC ROUND FRONT
REGULAR HEIGHT
5710BFT Lined Tank5710BFTU* Unlined Tank*Direct Import (CIF) Only
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
429mm(16⅞")
689mm(27⅛")
265mm(10½")
Finished Wall
C/L of OutletFinished Floor
515mm(20¼")305mm(12")
400mm(15¾")
672mm(26½")10mm(⅜")
420mm(16½")
C/L of Seat Post Holes140mm(5½")
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
47Revised: May 2014
6Lpf / 1.6Gpf 1pc ElongatedRegular Height
Caden5710BET-TS - Lined Tank
• Low consumption toilet• 6Lpf / 1.6Gpf• Elongated bowl• Vitreous china• 15¾" Bowl height• Soft white tank lever• 12" (305mm) Rough-in• 2" Fully glazed ball pass trapway• Siphon jet flush action• Water Surface (275mm x 210mm) 10⅞" x 8¼"• Smooth close toilet seat included• 423mm(W) x 723mm(D) x 663mm(H) 16⅝"(W) x 28½"(D) x 26⅛"(H)
• IAPMO cUPC• ASME A112.19.2 / CSA B45.1-2008• MaP tested 600g• LEED Compliant
600g
É P R E U V ET E S T E D
Shape of Toilet Seat:Elongated (Included)
Running change to soft white tank lever
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
CADEN6Lpf / 1.6Gpf 1PC ELONGATED REGULAR HEIGHT
Product Specs:
· Low consumption toilet
· 6Lpf / 1.6Gpf
· Elongated bowl
· Vitreous china
· 15¾" Bowl height
· Soft white tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· Siphon jet flush action
· Water Surface (275mm x 210mm) 10⅞" x 8¼"
· Smooth close toilet seat included
Overall Dimensions:
423mm(W) x 723mm(D) x 663mm(H)
16⅝"(W) x 28½"(D) x 26⅛"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
· MaP tested 600g
· LEED Compliant
Shipping:
Cube 7.25
GW 90 lbs
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
5710BET-TS Lined Tank
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
423mm(16⅝")
663mm(26⅛")
272mm(10¾")
Finished Wall
C/L of OutletFinished Floor
543mm(21⅜")305mm(12")
400mm(15¾")
723mm(28½")10mm(⅜")
470mm(18½")
C/L of Seat Post Holes140mm(5½")
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
49Revised: May 2014
4.8Lpf / 1.28Gpf 1pc Round FrontRegular Height
Chloe4710BFV - Lined Tank
4710BFVU - Unlined Tank* *(Direct import (CIF) only - Please contact your sales representative for further information.)
• High efficiency toilet• 4.8Lpf / 1.28Gpf• Round front bowl• Vitreous china• 15¾" Bowl height• Chrome tank lever• 12" (305mm) Rough-in• 2" Fully glazed ball pass trapway• 3" Flapper• Siphon jet flush action• Water Surface (209mm x 150mm) 8¼" x 6"• 429mm(W) x 672mm(D) x 689mm(H) 16⅞"(W) x 26½"(D) x 27⅛"(H)
• IAPMO cUPC• US EPA WaterSense• ASME A112.19.2 / CSA B45.1-2008• MaP tested 800g• LEED Compliant
Shape of Toilet Seat:Round front (Not included)
800g
É P R E U V ET E S T E D
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· High efficiency toilet
· 4.8Lpf / 1.28Gpf
· Round front bowl
· Vitreous china
· 15¾" Bowl height
· Chrome tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Water Surface (209mm x 150mm) 8¼" x 6"
· Toilet seat not included
Overall Dimensions:
429mm(W) x 672mm(D) x 689mm(H)
16⅞"(W) x 26½"(D) x 27⅛"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 / CSA B45.1-2008
· MaP Tested 800g
· LEED Compliant
Shipping:
Cube 8.29
GW 89 lbs
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
429mm(16⅞")
689mm(27⅛")
265mm(10½")
Finished Wall
C/L of OutletFinished Floor
515mm(20¼")305mm(12")
400mm(15¾")
672mm(26½")10mm(⅜")
420mm(16½")
C/L of Seat Post Holes140mm(5½")
CHLOE4.8Lpf / 1.28Gpf 1PC ROUND FRONT REGULAR HEIGHT
4710BFV Lined Tank4710BFVU* Unlined Tank*Direct Import (CIF) Only
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
51Revised: May 2014
4.8Lpf / 1.28Gpf 1pc ElongatedRegular Height
Caden4710BEV-TS - Lined Tank
• High efficiency toilet• 4.8Lpf / 1.28Gpf• Elongated bowl• Vitreous china• 15¾" Bowl height• Soft white tank lever• 12" (305mm) Rough-in• 2" Fully glazed ball pass trapway• 3" Flapper• Siphon jet flush action• Water Surface (230mm x 160mm) 9" x 6¼"• Smooth close toilet seat included• 423mm(W) x 723mm(D) x 663mm(H) 16⅝"(W) x 28½"(D) x 26⅛"(H)
• IAPMO cUPC• US EPA WaterSense• ASME A112.19.2 / CSA B45.1-2008• MaP tested 800g• LEED Compliant
Shape of Toilet Seat:Elongated (Included)
800g
É P R E U V ET E S T E D
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· High efficiency toilet
· 4.8Lpf / 1.28Gpf
· Elongated bowl
· Vitreous china
· 15¾" Bowl height
· Soft white tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Water Surface (230mm x 160mm) 9" x 6¼"
· Smooth close toilet seat included
Overall Dimensions:
423mm(W) x 723mm(D) x 663mm(H)
16⅝"(W) x 28½"(D) x 26⅛"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 / CSA B45.1-2008
· MaP Tested 800g
· LEED Compliant
Shipping:
Cube 7.25
GW 90 lbs
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
CADEN4.8Lpf / 1.28Gpf 1PC ELONGATED REGULAR HEIGHT
423mm(16⅝")
663mm(26⅛")
272mm(10¾")
Finished Wall
C/L of OutletFinished Floor
543mm(21⅜")305mm(12")
400mm(15¾")
723mm(28½")10mm(⅜")
470mm(18½")
C/L of Seat Post Holes140mm(5½")
4710BEV-TS Lined Tank
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
53Revised: May 2014
4.8Lpf / 1.28Gpf 1pc17" High Elongated
Caldwell4710BIV - Lined Tank
4710BIV-L - Lined Locking Tank**(Direct import (CIF) only - Please contact your sales representative for further information.)
• High efficiency toilet• 4.8Lpf / 1.28Gpf• Elongated bowl• Vitreous china• 17" Bowl height• Chrome top push button• Allen key locking mechanism (applicable only on locking tank option)• 12" (305mm) Rough-in• 2" Fully glazed ball pass trapway• 3" Flush valve• Siphon jet flush action• Water Surface (220mm x 150mm) 8⅝" x 6"• 380mm(W) x 735mm(D) x 705mm(H) 15"(W) x 29"(D) x 27¾"(H)
• IAPMO cUPC• US EPA WaterSense• ASME A112.19.2 / CSA B45.1-2008• ADA Guidelines & ANSI A117.1• MaP tested 800g• LEED Compliant
800g
É P R E U V ET E S T E D
Shape of Toilet Seat:Elongated (Not included)
Optional
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to complywith the local disability codes and standards prior to installing the product.
*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· High efficiency toilet
· 4.8Lpf / 1.28Gpf
· Elongated bowl
· Vitreous china
· 17" Bowl height
· Chrome top push button
· Allen key locking mechanism (applicable only on locking tank option)
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· 3" Flush valve
· Siphon jet flush action
· Water Surface (220mm x 150mm) 8⅝" x 6"
· Toilet seat not included
Overall Dimensions:
380mm(W) x 735mm(D) x 705mm(H)
15"(W) x 29"(D) x 27¾"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 / CSA B45.1-2008
· ADA Guidelines & ANSI A117.1
· MaP tested 800g
· LEED Compliant
Shipping:
Cube 8.8
GW 85 lbs
380mm(15")
705mm(27¾")
356mm(14")
255mm(10")
Finished Wall
C/L of OutletFinished Floor
560mm(22")305mm(12")
430mm(17")
735mm(29")200mm(8")
10mm(⅜")
C/L of Seat Post Holes140mm(5½")
470mm(18½")
CALDWELL4.8Lpf / 1.28Gpf 1PC 17" HIGH ELONGATED
4710BIV Lined Tank
4710BIV-L* Lined Locking Tank (optional)*Direct Import (CIF) Only
Optional
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: February 2014
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
55Revised: May 2014
4.8Lpf / 1.28Gpf or 3Lpf / 0.8Gpf 1pcRound Front Dual Flush Regular Height
Claire5710BFX - Lined Tank
5710BFXU - Unlined Tank**(Direct import (CIF) only - Please contact your sales representative for further information.)
• High efficiency dual flush toilet• 4.8Lpf / 1.28Gpf or 3Lpf / 0.8Gpf• Round front bowl• Vitreous china• 15½" Bowl height• Soft white top push button• 12" (305mm) Rough-in• 1¾" Fully glazed ball pass trapway• 3" Dual flush valve• Siphon jet flush action• Water Surface (210mm x 155mm) 8¼" x 6⅛"• 383mm(W) x 687mm(D) x 730mm(H) 15"(W) x 27"(D) x 28¾"(H)
• IAPMO cUPC• US EPA WaterSense• ASME A112.19.2 / CSA B45.1-2008• MaP tested 800g• MaP Premium certified• LEED Compliant
Shape of Toilet Seat:Round front (Not included)
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· High efficiency dual flush toilet
· 4.8Lpf / 1.28Gpf or 3Lpf / 0.8Gpf
· Round front bowl
· Vitreous china
· 15½" Bowl height
· Soft white top push button
· 12" (305mm) Rough-in
· 1¾" Fully glazed ball pass trapway
· 3" Dual flush valve
· Siphon jet flush action
· Water Surface (210mm x 155mm) 8¼" x 6⅛"
· Toilet seat not included
Overall Dimensions:
383mm(W) x 687mm(D) x 730mm(H)
15"(W) x 27"(D) x 28¾"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 / CSA B45.1-2008
· MaP Tested 800g
· MaP Premium certified
· LEED Compliant
Shipping:
Cube 7.50
GW 88 lbs
383mm(15")
730mm(28¾")
243mm(9½")
Finished Wall
C/L of OutletFinished Floor
557mm(22")305mm(12")
394mm(15½")
687mm(27")10mm(⅜")
C/L of Seat Post Holes
140mm(5½")
420mm(16½")
CLAIRE4.8Lpf / 1.28Gpf OR 3Lpf / 0.8Gpf 1PC ROUND FRONT
DUAL FLUSH REGULAR HEIGHT
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
5710BFX Lined Tank
5710BFXU* Unlined Tank*Direct Import (CIF) Only
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
57Revised: May 2014
4.8Lpf / 1.28Gpf or 3Lpf / 0.8Gpf 1pcElongated Dual Flush Regular Height
Canby5710BEX - Lined Tank
5710BEXU - Unlined Tank**(Direct import (CIF) only - Please contact your sales representative for further information.)
• High efficiency dual flush toilet• 4.8Lpf / 1.28Gpf or 3Lpf / 0.8Gpf• Elongated bowl• Vitreous china• 15½" Bowl height• Soft white top push button• 12" (305mm) Rough-in• 1¾" Fully glazed ball pass trapway• 3" Dual flush valve• Siphon jet flush action• Water Surface (225mm x 165mm) 8⅞" x 6½"• 385mm(W) x 742mm(D) x 730mm(H) 15⅛"(W) x 29¼"(D) x 28¾"(H)
• IAPMO cUPC• US EPA WaterSense• ASME A112.19.2 / CSA B45.1-2008• MaP tested 800g• MaP Premium certified• LEED Compliant
Shape of Toilet Seat:Elongated (Not included)
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· High efficiency dual flush toilet
· 4.8Lpf / 1.28Gpf or 3Lpf / 0.8Gpf
· Elongated bowl
· Vitreous china
· 15½" Bowl height
· Soft white top push button
· 12" (305mm) Rough-in
· 1¾" Fully glazed ball pass trapway
· 3" Dual flush valve
· Siphon jet flush action
· Water Surface (225mm x 165mm) 8⅞" x 6½"
· Toilet seat not included
Overall Dimensions:
385mm(W) x 742mm(D) x 730mm(H)
15⅛"(W) x 29¼"(D) x 28¾"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 / CSA B45.1-2008
· MaP Tested 800g
· MaP Premium certified
· LEED Compliant
Shipping:
Cube 8.23
GW 88 lbs
CANBY4.8Lpf / 1.28Gpf OR 3Lpf / 0.8Gpf 1PC DUAL FLUSH
ELONGATED REGULAR HEIGHT
l
385mm(15⅛")
730mm(28¾")
246mm(9⅝")
Finished Wal
C/L of OutletFinished Floor
560mm(22")305mm(12")
394mm(15½")
742mm(29¼")10mm(⅜")
470mm(18½")
C/L of Seat Post Holes140mm(5½")
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
5710BEX Lined Tank
5710BEXU* Unlined Tank*Direct Import (CIF) Only
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
59Revised: May 2014
4.8Lpf / 1.28Gpf 1pc 16⅞" High Elongated
Cali4710BOV - Lined Tank
4710BOVU - Unlined Tank
• High efficiency toilet• 4.8Lpf / 1.28Gpf• Elongated bowl with concealed skirted trapway• Vitreous china• 16⅞" Bowl height• Soft white tank lever• 12" (305mm) Rough-in• 2" Fully glazed ball pass trapway• 3" Flapper• Siphon jet flush action• Water Surface (240mm x 170mm) 9½" x 6⅝"• Smooth close toilet seat included• 392mm(W) x 725mm(D) x 760mm(H) 15½"(W) x 28½"(D) x 29⅞"(H)
• IAPMO cUPC• US EPA WaterSense• ASME A112.19.2 / CSA B45.1-2008• ADA Guidelines & ANSI A117.1• MaP tested 800g (Lined tank)• MaP tested 1000g (Unlined tank)• LEED Compliant
Shape of Toilet Seat:Elongated (Included)
Colours Available:Soft white
(Unlined Tank)
Notes:
Product Specs:
· High efficiency toilet
· 4.8Lpf/1.28Gpf
· Elongated bowl with concealed skirted trapway
· Vitreous china
· 16⅞" Bowl height
· Soft white tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Water surface (240mm x 170mm) 9½" x 6⅝"
· Smooth close toilet seat included
Overall Dimensions:
392mm (W) x 725mm (D) x 760mm (H)
15½" (W) x 28½" (D) x 29⅞" (H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A 12.19.2 / CSA B45.1-2008
· ADA Guidelines & ANSI A117.1
· MaP tested 800g
(Lined tank)
· MaP tested 1000g
(Unlined tank)
· LEED Compliant
Shipping:
Cube
9.39
GW
92.50lbs
4710BOV Lined Tank
Revised: May 2014 CONTRAC® 5970 Chedworth Way, Unit A, Mississauga Ontario Canada L5R 3V5 ● 1.888.256.7551
www.contrac.ca
Colours To Be Specified:Colour: Soft White
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to complywith the local disability codes and standards prior to installing the product.
CALI4.8Lpf / 1.28Gpf 1PC 16⅞" HIGH ELONGATED
4710BOVU Unlined Tank
392mm(15½")
368mm(14⅜")
760mm(29⅞")
200mm(7⅞")
550mm(21⅝")
465mm(18¼")
305mm(12")
430mm(16⅞")
275mm(10⅞")
C/L of Seatpost holes
140mm(5½")
470mm(18½")
10mm(⅜")
Finished Wall
Finished Floor
725mm(28½")
Colours To Be Specified:Colour: Soft White
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
61Revised: May 2014
4.8Lpf / 1.28Gpf 2 pc 16½" High Elongated
Cayla
• High efficiency toilet• 4.8Lpf / 1.28Gpf• Elongated bowl with concealed skirted trapway• Vitreous china• 16½" Bowl height• Soft white tank lever• 12" (305mm) Rough-in• 2" Fully glazed ball pass trapway• 3" Flapper• Siphon jet flush action• Water Surface (240mm x 170mm) 9½" x 6⅝"• Decorative chrome and soft white side caps included• Smooth close toilet seat included• 382mm(W) x 722mm(D) x 788mm(H) 15"(W) x 28½"(D) x 31"(H)
• IAPMO cUPC• US EPA WaterSense• ASME A112.19.2 / CSA B45.1-2008• ADA Guidelines & ANSI A117.1• MaP tested 1000g• LEED Compliant
Shape of Toilet Seat:Elongated (Included)
4782BOV - Bowl
4781BOV- Lined Tank
4781BOVU - Unlined Tank
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Available 2nd Quarter 2014
Product Specs:
· High efficiency toilet
· 4.8Lpf / 1.28Gpf
· Elongated bowl with concealed skirted trapway
· Vitreous china
· 16½" Bowl height
· Soft white tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Water surface (240mm x 170mm) 9½" x 6⅝"
· Decorative chrome and soft white side caps included
· Smooth close toilet seat included
Overall Dimensions: 382mm(W) x 722mm(D) x 788mm(H)
15"(W) x 28½"(D) x 31"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC · US EPA WaterSense
· ASME A112.19.2 / CSA B45.1-2008 · ADA Guidelines & ANSI A117.1
· MaP Tested 1000g
· LEED Compliant
Shipping:
Tank 1.32 cube 30.4 lbs (GW)
Bowl 5.72 cube 88 lbs (GW)
4782BOV Bowl4781BOV Lined Tank4781BOVU Unlined Tank
CAYLA4.8Lpf / 1.28Gpf 2PC 16½" HIGH ELONGATED
382mm(15")
348mm(13¾")
363mm(14¼")
338mm(13⅜")
788mm(31")
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Finished Wall
10mm(⅜")
420mm(16½")
722mm(28½")
Post Holes140mm(5½")
C/L of Seat
470mm(18½")
190mm(7½")
547mm(21½")
Finished Floor305mm(12")
C/L of Outlet
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Notes:The drawing below shows a rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to complywith the local disability codes and standards prior to installing the product.
*Bone and Biscuit available through Direct import (CIF) only.
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Features
63www.contrac.ca
Toilet Seat
Round FrontTS6120SC
• Smooth close plastic toilet seat• Fits all standard round front toilet bowls• Individually boxed• 5 Pieces in master carton• 365mm(W) x 429mm(D) x 25mm(H) 14⅜"(W) x 16⅞"(D) x 1"(H)
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· Smooth close plastic toilet seat
· Fits all standard round front toilet bowls
· Individually boxed
· 5 Pieces in master carton
Overall Dimensions:
365mm(W) x 429mm(D) x 25mm(H)
14⅜"(W) x 16⅞"(D) x 1"(H)
Shipping:
Cube 0.38
4.5 (Master carton)
GW 3.7 lbs
60 lbs (Master carton)
TS6120SC Round Front
ROUND FRONTTOILET SEAT
Notes: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
10¼"
8¼"
14⅜"
16⅞"
5½"
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Features
65www.contrac.ca
Toilet Seat
Elongated FrontTS7150SC
• Smooth close plastic toilet seat• Fits all standard elongated front toilet bowls• Individually boxed• 5 Pieces in master carton• 368mm(W) x 480mm(D) x 25mm(H) 14½"(W) x 18⅞"(D) x 1"(H)
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· Smooth close plastic toilet seat
· Fits all standard elongated front toilet bowls
· Individually boxed
· 5 Pieces in master carton
Overall Dimensions:
368mm(W) x 480mm(D) x 25mm(H)
14½"(W) x 18⅞"(D) x 1"(H)
Shipping:
Cube 0.47
5.48 (Master carton)
GW 4.2 lbs
45 lbs (Master carton)
TS7150SC Elongated Front
ELONGATED FRONTTOILET SEAT
Notes: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
12⅜"
8⅝"
14½"
18⅞"
5½"
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
67Revised: May 2014
4 Hole Bidet
Cale4830BLX
• Vitreous china• 15½" Bowl height• 4 Holes (3 faucet holes with 8" center and 1 small hole for pop-up rod)• Fits deck mounted fitting• Flushing rim• Vertical cleansing spray• Integral overflow• Faucet not included• 374mm(W) x 645mm(D) x 395mm(H) 14¾"(W) x 25⅜"(D) x 15½"(H)
• IAPMO cUPC• ASME A112.19.2 / CSA B45.1-2008
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Notes:▲ Dimensions shown for location of supplies are suggested. "P"trap and fittings not furnished with bidet and must be ordered separately. Provisions must be made for the installation of trap in floor.
• Refer to installation instructions supplied with Bidet and fitting for additional information.
*Bone and Biscuit available through Direct import (CIF) only.
4830BLX 4-Hole Bidet
CALE4-HOLE BIDET
Finished Floor
Finished Wall
Wall Supply Floor Supply Lag Bolts
Ø24mm(1")
204mm(8")
Ø35mm(1⅜")
Ø44mm(1¾")
Ø24mm(1")
282mm(11½")102mm
(4")
280mm(11")
335mm(13⅛")
395mm(15½")
645mm(25⅜")65mm(2½") 374mm
(14¾")
Ø64mm(2½")
125mm(5")
●
235mm(9¼")Finished Floor
Product Specs:
· Vitreous china
· 15½" Bowl height
· 4 Holes (3 faucet holes with 8" center and
1 small hole for pop-up rod)
· Fits deck mounted fitting
· Flushing rim
· Vertical cleansing spray
· Integral overflow
· Faucet not included
Overall Dimensions:
374mm(W) x 645mm(D) x 395mm(H)
14¾"(W) x 25⅜"(D) x 15½"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1 - 2008
Shipping:Cube 4.00
GW 44 lbs
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
69Revised: May 2014
Single Hole Bidet
Cambrie5810BLX
• Vitreous china• 15⅜" Bowl height• Single hole faucet drilling• To be installed with horizontal spray bidet
faucet • Integral overflow• Faucet not included• 358mm(W) x 555mm(D) x 405mm(H)• 14⅛"(W) x 21⅞"(D) x 16"(H)
• IAPMO cUPC• ASME A112.19.2 / CSA B45.1-2008
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Notes:▲ Dimensions shown for location of supplies are suggested. "P" trap and fittings not furnished with bidet and must be ordered separately. Provisions must be made for the installation of trap in floor.
*Bone and Biscuit available through Direct import (CIF) only.
5810BLX Single Hole Bidet
CAMBRIESINGLE HOLE BIDET
Finished FloorFinished Wall
Wall Supply
Floor Supply Lag Bolts
125mm(5")
Finished Floor
Product Specs:
· Vitreous china
· 15⅜" Bowl height
· Single hole faucet drilling
· Horizontal cleansing spray
· Integral overflow
Overall Dimensions:
358mm(W) x 555mm(D) x 405mm(H)
14⅛"(W) x 21⅞"(D) x 16"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1 - 2008
Shipping:Cube 3.51
GW 44 lbs
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
165mm(6½")
245mm(9⅝")
398mm(15⅝")
555mm(21⅞")
215mm(8½")
405mm(16")
140mm(5½")
65mm(2½")
358mm(14⅛")
Ø35mm(1⅜")
Ø44mm(1¾")
Ø64mm(2½")
Ø10mm (⅜")
365mm (14⅜")
250mm(9⅞")
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
71Revised: May 2014
Oval Drop-In Sink
Catalina4110BGW - Single Hole
4140BGW - 4" Center
4180BGW - 8" Center
• Vitreous china• Front overflow hole• Single hole, 4" or 8" faucet center• Template supplied• Faucet not included• 510mm(W) x 430mm(D) x 194mm(H) 20"(W) x 16⅞"(D) x 7⅝"(H)
• IAPMO cUPC• ASME A112.19.2 / CSA B45.1-2008• ADA Section 4.19
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· Vitreous china
· Front overflow hole
· Single hole, 4" or 8" faucet center
· Template supplied
· Faucet not included
Overall Dimensions:
510mm(W) x 430mm(D) x 194mm(H)
20"(W) x 16⅞"(D) x 7⅝"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
· ADA Section 4.19
Shipping:
Cube 1.84
GW 17 lbs
4110BGW Single Hole4140BGW 4" Center4180BGW 8" Center
CATALINAOVAL DROP-IN SINK
204mm (8")
Single Hole, 102mm(4") or 204mm(8")
62mm(2½")
3 Holes32mm(1¼")
180mm(7⅛")
OverflowHole
44mm
(1¾")64mm
(2½") Counter top cut out478mm x 394mm
(18⅞" x 15½")
510mm(20")
260mm(10¼")
318mm(12½")
Counter Top
Supplies As Required
1¼" O.D.Waste
430mm(16⅞")
195mm(7⅝")
155mm(6⅛")
Note:Dimensions shown for locationof supplied and waste are suggested.
Notes: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
This product is designed to comply with ADA requirements, if installed according to the standard. It is the responsibilityof the installer to comply with this standard prior to installation
*Bone and Biscuit available through Direct import (CIF) only.
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: May 2014
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
73Revised: May 2014
Round Drop-In Sink
Cailyn4110BRW - Single Hole
4140BRW - 4" Center
4180BRW - 8" Center
• Vitreous china• Front overflow hole• Single hole, 4" or 8" faucet center• Template supplied• Faucet not included• 484mm(W) x 484mm(D) x 206mm(H) 19"(W) x 19"(D) x 8⅛"(H)
• IAPMO cUPC• ASME A112.19.2 / CSA B45.1-2008• ADA Section 4.19
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
204mm (8")
Product Specs:
· Vitreous china
· Front overflow hole
· Single hole, 4" or 8" faucet center
· Template supplied
· Faucet not included
Overall Dimensions:
484mm(W) x 484mm(D) x 206mm(H)
19"(W) x 19"(D) x 8⅛"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
· ADA Section 4.19
Shipping:
Cube 1.27
GW 20 lbs
4110BRW Single Hole4140BRW 4" Center4180BRW 8" Center
3 Holes32mm(1¼")
181mm(7⅛")
OverflowHole
43mm
(1¾")64mm
(2½")
484mm(19")
260mm(10¼")
318mm(12½")
Counter Top
Supplies As Required
1¼" O.D.Waste
484mm(19")
206mm(8⅛")
CAILYNROUND DROP-IN SINK
Note:Dimensions shown for locationof supplied and waste are suggested.
Notes: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
This product is designed to comply with ADA requirements, if installed according to the standard. It is the responsibilityof the installer to comply with this standard prior to installation.
*Bone and Biscuit available through Direct import (CIF) only.
Single Hole, 102mm(4") or 204mm(8")
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: May 2014
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
75Revised: May 2014
Semi-Oval Drop-In Sink
Curtis4140BEW - 4" Center
• Vitreous china• Front overflow hole• 4" Faucet center• Template supplied• Faucet not included• 535mm(W) x 435mm(D) x 205mm(H) 21"(W) x 17¾"(D) x 8"(H)
• IAPMO cUPC• ASME A112.19.2 / CSA B45.1-2008• ADA Section 4.19
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· Vitreous china
· Front overflow hole
· 4" Faucet center
· Template supplied
· Faucet not included
Overall Dimensions:
535mm(W) x 435mm(D) x 205mm(H)
21"(W) x 17¾"(D) x 8"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
· ADA Section 4.19
Shipping:
Cube 1.73
GW 17 lbs
Notes: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
This product is designed to comply with ADA requirements, if installed according to the standard. It is the responsibilityof the installer to comply with this standard prior to installation.
*Bone and Biscuit available through Direct import (CIF) only.
4140BEW 4" Center
CURTISSEMI-OVAL DROP-IN SINK
Counter top
102mm(4")
51mm(2")
3 Holes32mm(1¼")
215mm(8½")
45mm(1¾")
65mm(2½")
Overflow HoleNote:Dimensions shown for location of suppliesand waste are suggested.
Counter Top Cut Out495mm x 400mm
(19½" x 15¾")
535mm(21")
260mm(10¼")
318mm(12½") 204mm(8")
Supplies AsRequired
1¼" O.D.Waste
435mm(17¾")
205mm(8")
150mm(5⅞")
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: May 2014
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
77Revised: May 2014
17" Oval Undermount Sink
Connor4210CFY
• Vitreous china• Front overflow hole• Template and mounting hardware supplied• Overall dimensions (W x D x H): (OD): 430mm(17") x 355mm(14") x 190mm(7½") (ID): 380mm(15") x 305mm(12") x 140mm(5½")
• IAPMO cUPC• ASME A112.19.2 / CSA B45.1-2008
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Installed
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
430mm(17")
45° 273mm (10¾")
380mm(15")
355mm(14")
305mm(12")
95mm(3¾")
70mm(2¾")
64mm(2½")
44mm(1¾")
Overflow Hole
CountertopCut Out
(Template Supplied)Mounting Clips
(4 Pieces)
190mm(7½")
140mm(5½")
355mm(14")13mm(½")
327mm (12⅞")
204mm(8")
Counter Top
Supplies As Required1¼" O.D.
Waste
430mm(17")
Detail of Mounting Clip
Sink
Brass insert
ClipScrew
Countertop Note:Dimensions shown forlocation of suppliesand ″P″ trap aresuggested.
Product Specs:
· Vitreous china
· Front overflow hole
· Template and mounting hardware supplied
Overall Dimensions (W x D x H):
(OD): 430mm(17") x 355mm(14") x 190mm(7½")
(ID): 380mm(15") x 305mm(12") x 140mm(5½")
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
Shipping:
Cube 1.11
GW 16 lbsNotes: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
4210CFY Undermount Sink
CONNOR17" OVAL UNDERMOUNT SINK
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
79Revised: May 2014
19¼" Oval Undermount Sink
Calvin4220CFY
• Vitreous china• Front overflow hole• Template and mounting hardware supplied• Overall dimensions (W x D x H): (OD): 490mm(19¼") x 410mm(16⅛") x 195mm(7⅝") (ID): 430mm(17") x 350mm(13¾") x 145mm(5¾")
• IAPMO cUPC• ASME A112.19.2 / CSA B45.1-2008
Installed
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Notes: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
4220CFY Undermount Sink
CALVIN19¼" OVAL UNDERMOUNT SINK
Product Specs:
· Vitreous china
· Front overflow hole
· Template and mounting hardware supplied
Overall Dimensions (W x D x H):
(OD): 490mm(19¼") x 410mm(16⅛") x 195mm(7⅝")
(ID): 430mm(17") x 350mm(13¾") x 145mm(5¾")
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
Shipping:
Cube 1.53
GW 19 lbs
490mm (19¼")
45° 273mm (10¾")
430mm(17")
410mm(16⅛")
350mm(13¾")
100mm(4")
70mm(2¾")
64mm(2½")
44mm(1¾")
Overflow Hole
CountertopCut Out
(Template Supplied)Mounting Clips
(4 Pieces)
195mm(7⅝")
145mm(5¾")
410mm(16⅛")15mm(⅝")
327mm (12⅞")
204mm(8")
Counter Top
Supplies As Required
32mm(1¼") O.D.Waste
Detail of Mounting Clip
Sink
Brass insert
ClipScrew
Countertop Note:Dimensions shown forlocation of suppliesand ″P″ trap aresuggested.
490mm(19¼")
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
81Revised: May 2014
16" Square Undermount Sink
Camden4210CHY
• Vitreous china• Front overflow hole• Template and mounting hardware supplied• Overall dimensions (W x D x H): (OD): 406mm(16") x 406mm(16") x 190mm(7½") (ID): 345mm(13⅝") x 345mm(13⅝") x 140mm(5½")
• IAPMO cUPC• ASME A112.19.2 / CSA B45.1-2008
Installed
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Notes: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· Vitreous china
· Front overflow hole
· Template and mounting hardware supplied
Overall Dimensions (W x D x H):
(OD): 406mm(16") x 406mm(16") x 190mm(7½")
(ID): 345mm(13⅝") x 345mm(13⅝") x 140mm(5½")
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
Shipping:
Cube 1.43
GW 24 lbs
4210CHY Undermount Sink
CAMDEN16" SQUARE UNDERMOUNT SINK
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
1¼" O.D.Waste
Supplies As Required
Detail of Mounting Clip
Sink
Brass insert
ClipScrew
Countertop Note:Dimensions shown forlocation of suppliesand ″P″ trap aresuggested.
406mm(16")
345mm(13⅝")
406mm(16")
345mm(13⅝") 30mm(1¼")
110mm(4⅜")
65mm(2½")44mm(1¾")
100mm(4")
Counter TopCut Out
(Template Supplied)
Mounting Clips(4 Pieces)
Overflow Hole 12mm x 50mm (½" x 2")
327mm(12⅞")
273mm(10¾")
204mm(8")
406mm(16")
Counter Top
406mm(16")
190mm(7½")
140mm(5½")
12mm(½")
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
83Revised: May 2014
20" Rectangular Undermount Sink
Catena4210CIY
• Vitreous china• Front overflow hole• Template and mounting hardware supplied• Overall dimensions (W x D x H): (OD): 510mm(20") x 395mm(15½") x 190mm(7½") (ID): 450mm(17¾") x 335mm(13⅛") x 140mm(5½")
• IAPMO cUPC• ASME A112.19.2 / CSA B45.1-2008
Installed
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Notes: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
510mm(20")
450mm(17¾")
395mm(15½")
335mm(13⅛")
65mm(2½") 44mm(1¾")
Overflow Hole 12mm x 50mm (½" x 2")
CountertopCut Out (Template Supplied)
Mounting Clips(4 Pieces)
130mm(5⅛")
30mm(1⅛")
110mm(4¼") 510mm(20")
327mm(12⅞")
273mm(10¾")
204mm(8")
Supplies As Required1¼" O.D Waste
Counter Top
190mm(7½")
140mm(5½")
12mm(½")
395mm(15½")
Detail of Mounting Clip
Sink
Brass insert
ClipScrew
Countertop Note:Dimensions shown forlocation of suppliesand ″P″ trap aresuggested.
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Product Specs:
· Vitreous china
· Front overflow hole
· Template and mounting hardware supplied
Overall Dimensions (W x D x H):
(OD): 510mm(20") x 395mm(15½") x 190mm(7½")
(ID): 450mm(17¾") x 335mm(13⅛") x 140mm(5½")
Compliance Certifications:
Meets or exceeds the following :
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
Shipping:
Cube 1.72
GW 27 lbs
CATENA20" RECTANGULAR UNDERMOUNT SINK
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
4210CIY Undermount Sink
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
85Revised: May 2014
21½" Rectangular Undermount Sink
Collette4220CIY
• Vitreous china• Front overflow hole• Template and mounting hardware supplied• Overall dimensions (W x D x H): (OD): 545mm(21½") x 355mm(14") x 190mm(7½") (ID): 485mm(19") x 295mm(11⅝") x 140mm(5½")
• IAPMO cUPC• ASME A112.19.2 / CSA B45.1-2008
Installed
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Notes: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
4220CIY Undermount Sink
COLLETTE21½" RECTANGULAR UNDERMOUNT SINK
Product Specs:
· Vitreous china
· Front overflow hole
· Template and mounting hardware supplied
Overall Dimensions (W x D x H):
(OD): 545mm(21½") x 355mm(14") x 190mm(7½")
(ID): 485mm(19") x 295mm(11⅝") x 140mm(5½")
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
Shipping:
Cube 1.64
GW 25 lbs
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
545mm(21½")
485mm(19")
355mm(14")
295mm(11⅝")
65mm(2½") 44mm(1¾")
Overflow Hole 12mm x 50mm (½" x 2")
CountertopCut Out (Template Supplied)
Mounting Clips(4 Pieces)
130mm(5⅛")
30mm(1⅛")
110mm(4¼") 545mm(21½")
327mm(12⅞")
273mm(10¾")
204mm(8")
Supplies As Required1¼" O.D Waste
Counter Top
190mm(7½")
140mm(5½")
12mm(½")
355mm(14")
Detail of Mounting Clip
Sink
Brass insert
ClipScrew
Countertop Note:Dimensions shown forlocation of suppliesand ″P″ trap aresuggested.
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
87Revised: May 2014
Pedestal Lavatory
Caprice4313DMX - Basin with Single Hole
4343DMX - Basin with 4" Center
4383DMX - Basin with 8" Center
4344DMX - Pedestal Leg
• Vitreous china• Rear overflow hole• Single hole, 4" or 8" faucet center• Supplied with mounting hardware• Faucet not included• 580mm(W) x 482mm(D) x 865mm(H) 22¾"(W) x 19"(D) x 34"(H)
• IAPMO cUPC• ASME A112.19.2 / CSA B45.1-2008
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Notes: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASMEstandard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· Vitreous china
· Rear overflow hole
· Single hole, 4" or 8" faucet center
· Supplied with mounting hardware
· Faucet not included
Overall Dimensions:
580mm(W) x 482mm(D) x 865mm(H)
22¾"(W) x 19"(D) x 34"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
Shipping:
Basin 2.36 cube
43 lbs (GW)
Leg 0.8 cube
24 lbs (GW)
CAPRICEPEDESTAL LAVATORY
527mm(20¾")
32mm(1¼") Dia.3 Holes
220mm(8⅝")
80mm(3⅛")
Overflow Hole
580mm(22¾")
44mm(1¾")64mm
(2½")
482mm(19")
Pedestal AnchorScrew Holes2mm x 10mm (⅛" x ⅜") Dia.
Finished Wall
Note: Dimensions shown for location of supplies and waste are suggested.*Actual dimensions must be taken from fixture.
*67mm(2⅝")
220mm(8⅝")
110mm(4⅜")
Supplies As Required
190mm(7½")
1¼" O.D. Waste
204mm(8")
225mm(8⅞")
12mm x 20mm(½" x ⅞")
Holes For Anchor
865mm(34")
579mm(22¾")
535mm(21")
Finished Floor190mm(7½")
95mm(3¾")
Back View
Single Hole,102mm(4") or 204mm(8")
Faucet Center
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
4313DMX Basin with Single Hole4343DMX Basin with 4" Center4383DMX Basin with 8" Center4344DMX Pedestal Leg
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
89Revised: May 2014
Pedestal Lavatory
Carley5343DMX - Basin with 4" Center
5383DMX - Basin with 8" Center
5344DMX - Pedestal Leg
• Vitreous china• Rear overflow hole• 4" or 8" faucet center• Supplied with mounting hardware• Faucet not included• 596mm(W) x 489mm(D) x 855mm(H) 23½"(W) x 19¼"(D) x 33⅝"(H)
• IAPMO cUPC• ASME A112.19.2 / CSA B45.1-2008
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Notes: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· Vitreous china
· Rear overflow hole
· 4" or 8" faucet center
· Supplied with mounting hardware
· Faucet not included
Overall Dimensions:
596mm(W) x 489mm(D) x 855mm(H)
23½"(W) x 19¼"(D) x 33⅝"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
Shipping:
Basin 2.64 cube
30 lbs (GW)
Leg 0.89 cube
18 lbs (GW)
5343DMX Basin with 4" Center5383DMX Basin with 8" Center5344DMX Pedestal Leg
CARLEYPEDESTAL LAVATORY
465mm(18⅜")
410mm(16")
102mm(4") or204mm(8")
Faucet Center
205mm(8")
Finished Wall
35mm(1¼")
64mm(2½") 44mm(1¾") 489mm(19¼")
Note: Dimensions shown for locationof supplies and waste are suggested.
596mm(23½")
215mm(8½")
691mm(27¼")
Supplies As Required
855mm(33⅝")
FinishedFloor
190mm(7½")
569mm(22⅜")
525mm(20⅝")
32mm(1¼")O.D. Waste
204mm(8")
115mm(4½")
Back View
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Revised: January 2014
58mm(2¼")
170mm(6¾")
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
91Revised: May 2014
Pedestal Lavatory
Calena5343AMX - Basin with 4" Center
5344AMX - Pedestal Leg
• Vitreous china• Rear overflow hole• 4" faucet center• Supplied with mounting hardware• Faucet not included• 530mm(W) x 435mm(D) x 800mm(H) 20⅞"(W) x 17⅛"(D) x 31½"(H)
• IAPMO cUPC• ASME A112.19.2 / CSA B45.1-2008
Colours Available:Soft white / Bone* / Biscuit*
*Bone and Biscuit available through Direct import (CIF) only.
Notes:
Product Specs:
· Vitreous china
· Rear overflow hole
· 4" faucet center
· Supplied with mounting hardware
· Faucet not included
Overall Dimensions:
530mm (W) x 435mm (D) x 800mm (H)
20⅞" (W) x 17⅛" (D) x 31½" (H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
Shipping:
Basin 2.15 cube
29 lbs (GW)
Leg 0.97 cube
17 lbs (GW)
5343AMX Basin with 4" Center5344AMX Pedestal Leg
CALENAPEDESTAL LAVATORY
Note: Dimensions shown for locationof supplies and waste are suggested.
Revised: January 2014
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca
435mm(17⅛")
Ø 44mm(1¾")Ø 64mm(2½")
186mm(7⅜")
Ø 32mm(1¼")
102mm(4")Faucet Center
530mm(20⅞")
55mm(2⅛")
800mm(31½")
210mm(8¼")
173mm(6¾")
Opening at rear
Colours To Be Specified:Colour: Soft White
Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
Finished Wall
432mm(17")
FinishedFloor
Back View
(70mm)2¾"
Supplies As Required
32mm(1¼")O.D. Waste
204mm(8")
650mm(25½")
518mm(20⅜")
438mm(18¼")
165mm (6½")
Mounting HolesØ 13mm(½")
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
93Revised: May 2014
1.9Lpf / 0.5Gpf Wall Mount Urinal
Cornell4810BEXTop Inlet Wall Mount Urinal
4810BEYRear Inlet Wall Mount Urinal
• High efficiency urinal• 1.9Lpf / 0.5Gpf• Vitreous china• Washout flush action• Outlet spud with 1½" tubing tailpiece• Flushing rim• Mounting hardware supplied• For concealed carrier installation (fits Zurn Z1221-130123 carriers)• Integral strainer• Flushometer not included• 321mm(W) x 324mm(D) x 457mm(H) 12⅝"(W) x 12¾"(D) x 18"(H)
• IAPMO cUPC• US EPA WaterSense• ASME A112.19.2 / CSA B45.1-2008• LEED Compliant
Colours Available:Soft white
Colours To Be Specified:Colour: Soft White
Notes:Flush Valve is not included and must be ordered separately. Provide suitable reinforcement for all wall supports.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASMEstandard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Comply ADA Section 4.18 when installed per code.
4810BEX Top Inlet Wall Mount Urinal4810BEY Rear Inlet Wall Mount Urinal
Product Specs:
· High efficiency urinal
· 1.9Lpf / 0.5Gpf
· Vitreous china
· Washout flush action
· Outlet spud with 1½" tubing tailpiece
· Flushing rim
· Mounting hardware supplied
· For concealed carrier installation (fits
Zurn Z1221-130123 carriers)
· Integral strainer
· Flushometer not included
Overall Dimensions:
321mm(W) x 324mm(D) x 457mm(H)
12⅝"(W) x 12¾"(D) x 18"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
Please note: In order to comply with WaterSense certification this urinal must be used with 1.9Lpf / 0.5Gpf WaterSense labeled flushometer.
· ASME A112.19.2 / CSA B45.1-2008
· LEED Compliant
Shipping:
Cube 2.35
GW 36 lbs
CORNELL1.9Lpf / 0.5 Gpf WALL MOUNT URINAL
292mm(11½")
305mm(12")
457mm(18")
292mm(11½")
Finished Floor32mm(1¼")
321mm(12⅝")170mm(6⅝")
1½" O.D. Waste
1½" O.D. Tailpiece
103mm(4")
121mm(4¾")
¾" SpudHangers
61mm(2½")
Finished Wall
66mm(2½")
115mm(4½")
324mm(12¾")
432mm(17") Max.
610mm(24")Optional To Finished Floor
180mm(7")
¾" S.P.S or ¾" C.W.TSupply To Flush Valve
19mm (¾")Top Spud
orBack Spud
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
95Revised: May 2014
1.9Lpf / 0.5Gpf Wall Mount Urinal
Carlo4810BHXTop Inlet Wall Mount Urinal
4810BHYRear Inlet Wall Mount Urinal
• High efficiency urinal• 1.9Lpf / 0.5Gpf• Vitreous china• Washout flush action• Outlet connection threaded 2" inside NPTF• Flushing rim• Mounting hardware supplied• For concealed carrier installation (fits Zurn Z1221-130125 carriers)• Extended sides for privacy• Integral trap• Flushometer not included• 465mm(W) x 350mm(D) x 685mm(H) 18¼"(W) x 13¾"(D) x 27"(H)
• IAPMO cUPC• US EPA WaterSense• ASME A112.19.2 / CSA B45.1-2008• LEED Compliant
Colours Available:Soft white
Notes:Flush Valve is not included and must be ordered separately. Provide suitable reinforcement for all wall supports.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASMEstandard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Comply ADA Section 4.18 when installed per code.
Product Specs:
· High efficiency urinal
· 1.9Lpf / 0.5Gpf
· Vitreous china
· Washout flush action
· Outlet connection threaded 2" inside NPTF
· Flushing rim
· Mounting hardware supplied
· For concealed carrier installation (fits
Zurn Z1221-130125 carriers)
· Extended sides for privacy
· Integral trap
· Flushometer not included
Overall Dimensions:
465mm(W) x 350mm(D) x 685mm(H)
18¼"(W) x 13¾"(D) x 27"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
Please note: In order to comply with WaterSense certification this urinal must be used with 1.9Lpf / 0.5Gpf WaterSense labeled flushometer.
· ASME A112.19.2 / CSA B45.1-2008
· LEED Compliant
Shipping:
Cube 4.94
GW 60 lbs
CARLO1.9Lpf / 0.5Gpf WALL MOUNT URINAL
4810BHX Top Inlet Wall Mount Urinal4810BHY Rear Inlet Wall Mount Urinal
Colours To Be Specified:Colour: Soft White
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
685mm(27")
440mm(17⅜")
Finished Floor
292mm(11½")
102mm(4")
121mm(4¾")
445mm(17½")
320mm(12½")
465mm(18¼")
C/L of Outlet
430mm(17")
110mm(4⅜")
2 Hangers
¾" S.P.S or ¾"C.W.T Supply To Flush Valve
Finished Wall
69mm(2¾")
350mm(13¾")
242mm(9½")
13mm(½")
432mm(17") Max.
610mm(24")Optional
2" N.P.T FemaleOutlet Connection
19mm(¾")Spud
8mm x 25mm(⅜" x ⅞")
Slot
19mm (¾")Top Spud
orBack Spud
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
97Revised: May 2014
1.9Lpf / 0.5Gpf Wall Mount Urinal
Carlton4810BFXTop Inlet Wall Mount Urinal
• High efficiency urinal• 1.9Lpf / 0.5Gpf• Vitreous china• Washout flush action• ¾" Top inlet spud• Outlet connection threaded 2" inside NPTF• Flushing rim• Mounting hardware supplied• For concealed carrier installation (fits Zurn Z1221-130119 carriers)• Extended sides for privacy• Integral trap• Flushometer not included• 445mm(W) x 375mm(D) x 684mm(H) 17½"(W) x 14¾"(D) x 27"(H)
• IAPMO cUPC• US EPA WaterSense• ASME A112.19.2 / CSA B45.1-2008• LEED Compliant
Colours Available:Soft white
Notes:Flush Valve is not included and must be ordered separately. Provide suitable reinforcement for all wall supports.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASMEstandard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Comply ADA Section 4.18 when installed per code.
Product Specs:
· High efficiency urinal
· 1.9Lpf / 0.5Gpf
· Vitreous china
· Washout flush action
· ¾" Top inlet spud
· Outlet connection threaded 2" inside NPTF
· Flushing rim
· Extended sides for privacy
· Integral trap
· Elongated 14¾" rim from finished wall
· For concealed carrier installation (fits
Zurn Z1221-130119 carriers)
· Flushometer not included
Overall Dimensions:
445mm(W) x 375mm(D) x 684mm(H)
17½"(W) x 14¾"(D) x 27"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
Please note: In order to comply with WaterSense certification this urinal must be used with 1.9Lpf / 0.5Gpf WaterSense labeled flushometer.
· ASME A112.19.2 / CSA B45.1-2008
· LEED Compliant
Shipping:
Cube 5.27
GW 65 lbs
4810BFX Top Inlet Wall Mount Urinal
CARLTON1.9Lpf / 0.5Gpf WALL MOUNT URINAL
Finished Floor
684mm(27")
485mm(9¾")
292mm(11½")
121mm(4¾")
102mm(4")
19mm(¾")Spud
375mm(14¾")2 Hangers
418mm(16½")
200mm(7⅞")
¾" S.P.S. or ¾" C.W.T.Supply To Flush Valve
257mm(10⅛")
445mm(17½")
C/L of Outlet
Finished Wall
165mm(6½")60mm
(2½")
375mm(14¾")
13mm(½")
432mm(17") Max.610mm(24")
Optional2" N.P.T Female Outlet Connection
8mm x 25mm(⅜" x ⅞")
Slot
19mm (¾")Top Inlet Spud
Colours To Be Specified:Colour: Soft White
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
99Revised: May 2014
1.9Lpf / 0.5Gpf Wall Mount Urinal
Canata4810BMXTop Inlet Wall Mount Urinal
• High efficiency urinal• 1.9Lpf / 0.5Gpf• Vitreous china• Siphon jet flush action• ¾" Top inlet spud• Outlet connection threaded 2" inside NPTF• Flushing rim• Integral trap• Wall hanger included• Elongated 13⅞" rim from finished wall• Flushometer not included• 365mm(W) x 351mm(D) x 542mm(H) 14⅜"(W) x 13⅞"(D) x 21⅜"(H)
• IAPMO cUPC• US EPA WaterSense• ASME A112.19.2 / CSA B45.1-2008• LEED Compliant
Colours Available:Soft white
Colours To Be Specified:Colour: Soft White
Product Specs:
· High efficiency urinal
· 1.9Lpf / 0.5Gpf
· Vitreous china
· Siphon jet flush action
· ¾" Top inlet spud
· Outlet connection threaded 2" inside NPTF
· Flushing rim
· Integral trap
· Wall hanger included
· Elongated 13⅞" rim from finished wall
· Flushometer not included
Overall Dimensions:
365mm(W) x 351mm(D) x 542mm(H)
14⅜"(W) x 13⅞"(D) x 21⅜"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
Please note: In order to comply with WaterSense certification this urinal must be used with 1.9Lpf / 0.5Gpf WaterSense labeled flushometer.
· ASME A112.19.2 / CSA B45.1-2008
· LEED Compliant
Shipping:
Cube 3.14
GW 33 lbs
4810BMX Top Inlet Wall Mount Urinal
CANATA1.9Lpf / 0.5Gpf WALL MOUNT URINAL
Finished Floor
542mm(21⅜")
292mm(11½")
121mm(4¾")
102mm(4")
365mm(14⅜") 2 Hangers
¾" S.P.S. or ¾" C.W.T.Supply To Flush Valve
Finished Wall
57mm(2¼")
351mm(13⅞")
432mm (17") Max.610mm(24")
Optional2" N.P.T Female Outlet Connection
19mm (¾")Top Inlet Spud
Ø41mm (1⅝")
Notes:Flush Valve is not included and must be ordered separately. Provide suitable reinforcement for all wall supports.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Comply ADA Section 4.18 when installed per code.
158mm(6¼")
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
101Revised: May 2014
4.8Lpf / 1.28GpfElongated Flushometer Bowl
Colter4762BEX Top Inlet Flushometer Bowl
4762BEURear Inlet Flushometer Bowl
• High efficiency flushometer bowl• 4.8Lpf / 1.28Gpf• Will also function with 6Lpf / 1.6Gpf flushometer • Elongated bowl• Vitreous china• 15⅛" Bowl height• 10" (254mm) Rough-in• 2" Fully glazed ball pass trapway• Siphon jet flush action• Water surface (270mm x 185mm) 10⅝" x 7¼"• Flushometer not included• 382mm(W) x 705mm(D) x 385mm(H) 15"(W) x 27¾"(D) x 15⅛"(H)
• IAPMO cUPC• ASME A112.19.2 / CSA B45.1-2008• MaP tested 800g (Top inlet)• MaP tested 600g (Rear inlet)• LEED Compliant
Colours Available:Soft white
Shape of Toilet Seat:Commercial Elongated(Not included)
800g
É P R E U V ET E S T E D
(Top Inlet)
Product Specs:
· High efficiency flushometer bowl
· 4.8Lpf / 1.28Gpf · Will also function with 6Lpf / 1.6Gpf flushometer
· Elongated bowl
· Vitreous china
· 15⅛" Bowl height
· 10" (254mm) Rough-in
· 2" Fully glazed ball pass trapway
· Siphon jet flush action
· Water surface (270mm x 185mm) 10⅝" x 7¼"
· Toilet seat and flushometer not included
Overall Dimensions:
382mm(W) x 705mm(D) x 385mm(H)
15"(W) x 27¾"(D) x 15⅛"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
· MaP tested 800g (Top Inlet)
· MaP tested 600g (Rear Inlet)
Please note: MaP testing was completed with Sloan Flushometer Valve Model: Royal 111-1.2
· LEED Compliant
Shipping:
Cube 4.17
GW 56 lbs
Colours To Be Specified:Colour: Soft White
4762BEX Top Inlet Flushometer Bowl4762BEU Rear Inlet Flushometer Bowl
Notes:This toilet is designed to rough-in at a minimum dimension of 254mm (10") from finished wall toC/L of outlet. Flush valve not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerancesestablished by ASME standard A112.19.2. These measurements are subject to change or cancellation.No responsibility is assumed for use of superseded or voided pages.
COLTER4.8Lpf / 1.28Gpf ELONGATED
FLUSHOMETER BOWL
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
Finished Floor
470mm(18½")Ø15mm(⅝")
38mm(1½") Spud
140mm(5½")
550mm(21⅝")
254mm(10")
385mm(15⅛")
705mm(27¾")382mm(15")
243mm(9½")
Finished Wall
C/L of Outlet
38mm(1½") Spud
38mm (1½")Top Spud
orBack Spud
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
103Revised: May 2014
4.8Lpf / 1.28GpfElongated Flushometer Bowl
Clay4762BOX Top Inlet Flushometer Bowl
4762BOURear Inlet Flushometer Bowl
• High efficiency flushometer bowl• 4.8Lpf / 1.28Gpf• Will also function with 6Lpf / 1.6Gpf flushometer • Elongated bowl• Vitreous china• 16⅝" Bowl height• 10" (254mm) Rough-in• 2" Fully glazed ball pass trapway• Water surface (250mm x 170mm) 9⅞" x 6⅝"• Flushometer not included• 382mm(W) x 705mm(D) x 424mm(H) 15"(W) x 27¾"(D) x 16⅝"(H)
• IAPMO cUPC• ASME A112.19.2 / CSA B45.1-2008• ADA Guidelines & ANSI A117.1• MaP tested 800g (Top inlet)• MaP tested 500g (Rear inlet)• LEED Compliant
Colours Available:Soft white
Shape of Toilet Seat:Commercial Elongated(Not included)
800g
É P R E U V ET E S T E D
(Top Inlet)
Product Specs:
· High efficiency flush valve bowl
· 4.8Lpf / 1.28Gpf
· Will also function with 6Lpf / 1.6Gpf flushometer
· Elongated bowl
· Vitreous china
· 16⅝" Bowl height
· 10" (254mm) Rough-in
· 2" Fully glazed ball pass trapway
· Siphon jet flush action
· Water surface (250mm x 170mm) 9⅞" x 6⅝"
· Toilet seat and flushometer not included
Overall Dimensions:
382mm(W) x 705mm(D) x 424mm(H)
15"(W) x 27¾"(D) x 16⅝"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
· ADA Guidelines & ANSI A117.1
· MaP tested 800g (Top Inlet)
· MaP tested 500g (Rear Inlet)
Please note: MaP testing was completed with Sloan Flushometer Valve Model: Royal 111-1.2
· LEED Compliant
Shipping:
Cube 4.55
GW 50 lbs
4762BOX Top Inlet Flushometer Bowl4762BOU Rear Inlet Flushometer Bowl
Notes:This toilet is designed to rough-in at a minimum dimension of 254mm (10") from finished wall toC/L of outlet. Flush valve not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerancesestablished by ASME standard A112.19.2. These measurements are subject to change or cancellation.No responsibility is assumed for use of superseded or voided pages.
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer tocomply with the local disability codes and standards prior to installing the product.
470mm(18½")
Finished Floor
15mm(⅝")
140mm(5½")
243mm(9½")
545mm(21½")
254mm(10")
705mm(27¾")
424mm(16⅝")
382mm(15")
C/L of Outlet
CLAY4.8Lpf / 1.28Gpf ELONGATED FLUSHOMETER BOWL
38mm(1½") Spud
38mm(1½") Spud
Finished Wall
38mm (1½")Top Spud
orBack Spud
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
Colours To Be Specified:Colour: Soft White
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
105Revised: May 2014
4.8Lpf / 1.28GpfElongated Flushometer Bowl
Clark4762CEX Top Inlet Wall Hung Flushometer Bowl
4762CEURear Inlet Wall Hung Flushometer Bowl
• High efficiency flushometer bowl• 4.8Lpf / 1.28Gpf• Will also function with 6Lpf / 1.6Gpf flushometer • Elongated bowl• Vitreous china• 2" Fully glazed ball pass trapway• Siphon jet flush action• Water surface (260mm x 220mm) 10¼" x 8⅝"• Flushometer not included• 390mm(W) x 650mm(D) x 335mm(H) 15⅜"(W) x 25½"(D) x 13⅛"(H)
• IAPMO cUPC• ASME A112.19.2 / CSA B45.1-2008• ADA Guidelines & ANSI A117.1• MaP tested 800g (Top inlet)• MaP tested 500g (Rear inlet)• LEED Compliant
Colours Available:Soft white
Shape of Toilet Seat:Commercial Elongated(Not included)
800g
É P R E U V ET E S T E D
(Top Inlet)
Product Specs:
· High efficiency flushometer bowl
· 4.8Lpf / 1.28Gpf
· Will also function with 6Lpf / 1.6Gpf flushometer
· Elongated bowl
· Vitreous china
· 2" Fully glazed ball pass trapway
· Siphon jet flush action
· Water surface (260mm x 220mm) 10¼" x 8⅝"
· Toilet seat and flushometer not included
Overall Dimensions:
390mm(W) x 650mm(D) x 335mm(H)
15⅜"(W) x 25½"(D) x 13⅛"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
· ADA Guidelines & ANSI A117.1
· MaP tested 800g (Top Inlet)
· MaP tested 500g (Rear Inlet)
Please note: MaP testing was completed with Sloan Flushometer Valve Model: Royal 111-1.2
· LEED Compliant
Shipping:
Cube 3.79
GW 50 lbs
4762CEX Top Inlet Wall Hung Flushometer Bowl4762CEU Rear Inlet Wall Hung Flushometer Bowl
Notes:• Toilet models designed to meet ADA Accessibility Standard when top of seat at 432mm to 482mm (17" to 19") from finished floor. Flush valve not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerancesestablished by ASME standard A112.19.2. These measurements are subject to change or cancellation.No responsibility is assumed for use of superseded or voided pages.
CLARK4.8Lpf / 1.28Gpf ELONGATED
WALL HUNG FLUSHOMETER BOWL
Colours To Be Specified:Colour: Soft White
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
468mm(18½")
Finished Floor
15mm(⅝")
140mm(5½")
390mm(15⅜")650mm(25½")
335mm(13⅛")
381mm(15")
● 432mm(17") Max.
ADA Height
38mm(1½") Spud
(4762CEX only)
38mm(1½") Spud
38mm (1½")Top Spud
orBack Spud
Finished Wall
230mm(9")
Ø38mm(1½")Spud
(4762CEU only)
Ø57mm(2¼")
190mm(7½")
Ø25mm(1")
254mm(10")
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
107Revised: May 2014
3.8Lpf / 1Gpf 2pc17" High Elongated Pressure Assist
Cleo5722BOY - Bowl
5721BOY - Unlined Tank
• High efficiency pressure assist toilet• 3.8Lpf / 1Gpf• Powerful and Quiet pressure assisted Sloan FLUSHMATE® Flush assures clean and complete removal of all waste• Elongated bowl• Vitreous china• 17" Bowl height• Chrome tank lever• 12" (305mm) Rough-in• 2" Fully glazed ball pass trapway• Siphon jet flush action• Water Surface (203mm x 165mm) 8" x 6½"• 447mm(W) x 716mm(D) x 799mm(H) 17⅝"(W) x 28⅛"(D) x 31½"(H)
• IAPMO cUPC• US EPA WaterSense• ASME A112.19.2 / CSA B45.1-2008• ADA Guidelines & ANSI A117.1• MaP tested 1000g• MaP Premium certified• LEED Compliant
Colours Available:Soft white
Shape of Toilet Seat:Elongated (Not included)
Product Specs:
· High efficiency pressure assist toilet
· 3.8Lpf / 1Gpf
· Powerful and Quiet pressure assisted
Sloan FLUSHMATE® Flush assures clean
and complete removal of all waste
· Elongated bowl
· Vitreous china
· 17" Bowl height
· Chrome tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· Siphon jet flush action
· Water surface (203mm x 165mm) 8" x 6½"
· Toilet seat not included
Overall Dimensions:
447mm(W) x 716mm(D) x 799mm(H)
17⅝"(W) x 28⅛"(D) x 31½"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 / CSA B45.1 2008
· ADA Guidelines & ANSI A117.1
· Map tested 1000g · MaP Premium certified
· LEED Compliant
· Map Premium certified
Shipping:
Tank 1.43 cube
33 lbs (GW)
Bowl 4.59 cube
52 lbs (GW)
10mm(⅜")
305mm(12")
431mm(17")
C/L of Seatpost holes
140mm(5½")
447mm(17⅝")
799mm(31½")
470mm(18½")
357mm(14")
262mm(10⅜")
356mm(14")
716mm(28⅛")202mm(8")
547mm(21½")
5722BOY Bowl
Finished FloorC/L of Outlet
Finished Wall
CLEO 3.8Lpf / 1Gpf 2PC 17" HIGH
ELONGATED PRESSURE ASSIST
693mm(27¼")
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to complywith the local disability codes and standards prior to installing the product.
5721BOY Unlined Pressure Assist Tank
Colours To Be Specified:Colour: Soft White
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
109Revised: May 2014
3.8Lpf / 1.0Gpf 2pc 17" HighElongated Rear Outlet Pressure Assist
Chane5722BMY - Bowl
5721BOY - Unlined Tank
• High efficiency pressure assist toilet• 3.8Lpf / 1.0Gpf• Powerful and Quiet pressure assisted Sloan FLUSHMATE® Flush assures clean and complete removal of all waste• Elongated siphon jet action bowl• Vitreous china• 17" Bowl height• Chrome tank lever• Back outlet flange• 2" Fully glazed ball pass trapway• Water surface (295mm x 198mm) 11⅝" x 7⅞"• 447mm(W) x 755mm(D) x 800mm(H) 17½"(W) x 29¾"(D) x 31½"(H)
• IAPMO cUPC• US EPA WaterSense• ASME A112.19.2 / CSA B45.1-2008• ADA Guidelines & ANSI A117.1• MaP tested 1000g• MaP Premium certified• LEED Compliant
Colours Available:Soft white
Shape of Toilet Seat:Elongated (Not included)
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L ofoutlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibilityis assumed for use of superseded or voided pages.
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to complywith the local disability codes and standards prior to installing the product.
Product Specs:
· High efficiency pressure assist toilet
· 3.8Lpf / 1.0Gpf
· Powerful and Quiet pressure assisted
Sloan FLUSHMATE® Flush assures clean
and complete removal of all waste
· Elongated siphon jet action bowl
· Vitreous china
· 17" Bowl height
· Chrome tank lever
· Back outlet flange
· 2" Fully glazed ball pass trapway
· Water surface (295mm x 198mm) 11⅝" x 7⅞"
· Toilet seat not included
Overall Dimensions:
447mm(W) x 755mm(D) x 800mm(H)
17½"(W) x 29¾"(D) x 31½"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 / CSA B45.1-2008
· ADA Guidelines & ANSI A117.1
· MaP tested 1000g
· MaP Premium certified
· LEED Compliant
Shipping:
Tank 1.43 cube / 33 lbs (GW)
Bowl 5.13 cube / 60 lbs (GW)
Colours To Be Specified:Colour: Soft White
5722BMY Bowl
5721BOY Unlined Pressure Assist Tank
CHANE3.8Lpf / 1.0Gpf 2PC 17" HIGH ELONGATED
REAR OUTLET PRESSURE ASSIST
430mm(17")
Finished Floor
638mm(25⅛")
470mm(18½")
755mm(29¾")
755mm(29¾") 209mm(9⅞")
Finished Wall
C/L of Seat Post Holes140mm(5½")
447mm(17½")
357mm(14⅛")
375mm(14⅞")
232mm(9¼")
800mm(31½")
232mm(9¼")
375mm(14⅞")
150mm(5⅞")
108mm(4¼")
Ø82mm(3¼")
Ø65mm(2⅝")
22*12mm(⅞"*½")
Back View
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
111Revised: May 2014
6Lpf / 1.6Gpf 2pc Kindergarten
Caledon4760BKT - Lined Tank / Bowl
4760BKT-L - Lined Locking Tank / Bowl
• Low consumption toilet• 6Lpf / 1.6Gpf• Vitreous china• 11" Bowl height• Soft white tank lever• Allen key locking mechanism (applicable only on locking tank option)• 10" (254mm) Rough-in• 2" Fully glazed ball pass trapway• Siphon jet flush action• Plastic toilet seat included• Water surface (235mm x 210mm) 9¼" x 8¼"• 432mm(W) x 617mm(D) x 671mm(H) 17"(W) x 24¼"(D) x 26⅜"(H)
• IAPMO cUPC• ASME A112.19.2 / CSA B45.1-2008• LEED Compliant
Colours Available:Soft white
Shape of Toilet Seat:Kindergarten (Included)
Optional
Notes:This toilet is designed to rough-in at a minimum dimension of 254mm (10") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Colours To Be Specified:Colour: Soft White
Product Specs:
· Low consumption toilet
· 6Lpf / 1.6Gpf
· Vitreous china
· 11" Bowl height
· Soft white tank lever
· Allen key locking mechanism (applicable only on locking tank option)
· 10" (254mm) Rough-in
· 2" Fully glazed ball pass trapway
· Siphon jet flush action
· Water surface (235mm x 210mm) 9¼" x 8¼"
· Plastic toilet seat included
Overall Dimensions:
432mm(W) x 617mm(D) x 671mm(H)
17"(W) x 24¼"(D) x 26⅜"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1 2008
· LEED Compliant
Shipping:
Cube 4.3
GW 72 lbs
CALEDON 6Lpf / 1.6Gpf 2PC KINDERGARTEN
254mm(10")
432mm(17")
380mm(15")
671mm(26⅜")
280mm(11")
617mm(24¼")
C/L of Seatpost holes
140mm (5½")
380mm(15")
343mm(13½")
217mm(8½") 440mm(17⅜")
10mm(⅜")
203mm(8")
575mm(22⅝")
Finished wall
C/L of OutletFinished floor
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
Optional
4760BKT Lined Tank
4760BKT-L Lined Locking Tank (optional)
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
113Revised: May 2014
Wall Mount Sink
Chelsea4610BHW - Single Hole
4640BHW - 4" Center
4680BHW - 8" Center
• Vitreous china• Front overflow hole• Single hole, 4" or 8" faucet center• Mounting hardware supplied• Optional metal support leg (Supplied by others)• Faucet not included• 485mm(W) x 440mm(D) x 215mm(H) 19⅛"(W) x 17⅜"(D) x 8½"(H)
• IAPMO cUPC• ASME A112.19.2 / CSA B45.1-2008• ADA Guidelines & ANSI A117.1
Colours Available:Soft white
Ø
Ø
Ø
Notes: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to complywith the local disability codes and standards prior to installing the product.
Product Specs:
· Vitreous china
· Front overflow hole
· Single hole, 4" or 8" faucet center
· Mounting hardware supplied
· Optional metal support legs (Supplied by others)
· Faucet not included
Overall Dimensions:
485mm(W) x 440mm(D) x 215mm(H)
19⅛"(W) x 17⅜"(D) x 8½"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
· ADA Guidelines & ANSI A117.1
Shipping:
Cube 1.88
GW 26.5 lbs
4610BHW Single Hole4640BHW 4" Center4680BHW 8" Center
485mm(19⅛")
Dimensions shown for location ofSupplies and “P” Trap are suggested.Provide reinforcement for wall supports.*Actual dimensions must be taken from fixture.
Single hole, 102mm(4") or 204mm(8")
70mm(2¾")
60mm(2⅜")
216mm(8½")
84mm(3¼")
Overflow Hole
18mm(¾")
44mm(1¾")
32mm(1¼") 105mm(4⅛")
Access HolesFor Metal Stands (x6)
107mm(6¾")
440mm(17⅜")
787mm(31") Min
-869mm
(34") Max.
756mm(29¾") Min
-781mm
(30¾") Max.
Finished Floor
133mm(5¼")
6x BracketAnchor Hole(8mm Dia.)
Anchor Screw Hole x 2
Mounting Bracket
Supplies As Required
Drain Plug Outlet 1¼" O.D. Waste
215mm(8½") 235mm
(9¼")279mm
(11")
204mm(8")
64mm(2½")
CHELSEAWALL MOUNT SINK
Colours To Be Specified:Colour: Soft White
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
115Revised: May 2014
Semi-Recessed Sink
Cassidy4313DGX - Single Hole
4343DGX - 4" Center
4383DGX - 8" Center
• Vitreous china• Rear overflow hole• Single hole, 4" or 8" faucet center• Mounting screws and cut-out template supplied• 8" Front overhang• Wall secured lavatory for countertop or vanity installation• Faucet not included• 614mm(W) x 512mm(D) x 180mm(H) 24⅛"(W) x 20⅛"(D) x 7"(H)
• IAPMO cUPC• ASME A112.19.2 / CSA B45.1-2008• ADA Guidelines & ANSI A117.1
Colours Available:Soft white
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
Colours To Be Specified:Colour: Soft White
Product Specs:
· Vitreous china
· Rear overflow hole
· Single hole, 4" or 8" faucet center
· Mounting screws and cut-out
template supplied
· 8" Front overhang
· Wall secured lavatory for countertop or
vanity installation
· Faucet not included
Overall Dimensions:
614mm(W) x 512mm(D) x 180mm(H)
24⅛"(W) x 20⅛"(D) x 7"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
· ADA Guidelines & ANSI A117.1
Shipping:
Cube 2.32
GW 44 lbs
Notes: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to complywith the local disability codes and standards prior to installing the product.
4313DGX Single Hole4343DGX 4" Center4383DGX 8" Center
CASSIDYSEMI-RECESSED SINK
44mm(1¾")64mm(2½")
62mm(2½")
32mm(1¼")x 3 Holes
220mm(8⅝")
512mm(20⅛")
864mm(34") Max.ADA Height
614mm(24⅛")
Finshed Wall
Finshed Floor
170mm(6⅝")
180mm(7")
205mm(8")
685mm(27") Min.ADA Height
Single hole, 102mm(4") or 204mm(8")
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
117Revised: May 2014
Wall Mount Sink with Ledge
Carmin4610BHZ - Single Hole
4640BHZ - 4" Center
4680BHZ - 8" Center
• Vitreous china• Rear overflow hole• Single hole, 4" or 8" faucet center• Mounting bracket and hardware supplied• For concealed arm carrier installation (fits Zurn Z1231-EZ, Z1231-EZR, Z1253, Z1254 arm carriers)• Back splash ledge• Faucet not included• 510mm(W) x 467mm(D) x 262mm(H) 20"(W) x 18⅜"(D) x 10⅜"(H)
• IAPMO cUPC• ASME A112.19.2 / CSA B45.1-2008• ADA Guidelines & ANSI A117.1
Colours Available:Soft white
Product Specs:
· Vitreous china
· Rear overflow hole
· Single hole, 4" or 8" faucet center
· Mounting bracket and hardware supplied
· For concealed arm carrier installation (fits Zurn
Z1231-EZ, Z1231-EZR, Z1253, Z1254 arm carriers)
· Back splash ledge
· Faucet not included
Overall Dimensions:
510mm(W) x 467mm(D) x 262mm(H)
20"(W) x 18⅜"(D) x 10⅜"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
· ADA Guidelines & ANSI A117.1
Shipping:
Cube 2.87
GW 38 lbs
Notes: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASMEstandard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to complywith the local disability codes and standards prior to installing the product.
4610BHZ Single Hole 4640BHZ 4" Center 4680BHZ 8" Center
44mm(1¾")64mm(2½")
32mm(1¼")x 3 Holes
212mm(8⅞")
110mm(4⅜")
510mm(20")
416mm(16⅜")
160mm(6¼")
160mm(6¼")
410mm(16⅛")
467mm(18⅜")
193mm(7⅝")
864mm(34") Max.ADA Height
x2 Carrier Arm HolesØ60mm(2⅜")
Finshed Wall
Finshed Floor
262mm(10⅜")
685mm(27") Min.
ADA Height
205mm(8")102mm (4")
Single hole, 102mm(4") or 204mm(8")
Ø27mm(1") x 6 Floor Stand Holes
CARMINWALL MOUNT SINK WITH LEDGE
Colours To Be Specified:Colour: Soft White
Back View
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca Revised: January 2014
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
www.contrac.ca
Features Compliance Certifications
Meets or exceeds the following:
119Revised: May 2014
Wall Mount Sink with Shroud
Clayton4610CHZ - Single Hole
4640CHZ - 4" Center
4680CHZ - 8" Center
4644CHZ - Shroud
• Vitreous china• Rear overflow hole• Single hole, 4" or 8" faucet center• Mounting bracket and hardware supplied• For concealed arm carrier installation (fits Zurn Z1231-EZ, Z1231-EZR, Z1253, Z1254 arm carriers)• Faucet not included• 520mm(W) x 585mm(D) x 543mm(H) 20½"(W) x 23"(D) x 21⅜"(H)
• IAPMO cUPC• ASME A112.19.2 / CSA B45.1-2008• ADA Guidelines & ANSI A117.1
Colours Available:Soft white
Product Specs:
· Vitreous china
· Rear overflow hole
· Single hole, 4" or 8" faucet center
· Mounting bracket and hardware supplied
· For concealed arm carrier installation (fits Zurn
Z1231-EZ, Z1231-EZR, Z1253, Z1254 arm carriers)
· Faucet not included
Overall Dimensions:
520mm(W) x 585mm(D) x 543mm(H)
20½"(W) x 23"(D) x 21⅜"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
· ADA Guidelines & ANSI A117.1
Shipping (Sink):
Cube 2.93
GW 49 lbs
Shipping (Shroud):
Cube 1.48
GW 21 lbs
Important: This sink is designed to comply with ADA ASME A117.1 and OBC barrier-free standard when installed in accordance with this measurement. Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
4610CHZ Single Hole4640CHZ 4" Center 4680CHZ 8" Center4644CHZ Shroud
CLAYTONWALL MOUNT SINK WITH SHROUD
Colours To Be Specified:Colour: Soft White
520mm(20½")
420mm(16½")
130mm(5⅛")
140mm(5½")
90mm(3½")100mm(4")
Ø25mm(1") x 6 FloorStand Holes
80mm(3⅛")
Finished Wall
Finished Floor
222mm(8¾")
x2 Carrier Arm HolesØ59mm(2⅜")
10mm(⅜")432mm(17")
410mm(16⅛")
265mm(10½")
8mm(⅜") 390mm(15⅜")
208mm(8⅛") 32mm(1¼")
44mm(1¾")64mm(2½")
585mm(23")
543mm(21⅜")
315mm(12⅜")
Single hole, 102mm(4") or 204mm(8")
840mm(33") Max.
695mm685mm
(27") Min.
155mm(6⅛")
370mm(14½")
205mm(8")
280mm(11")
Back ViewShroud
CONTRAC® 5970 Chedworth Way, Unit A, Mississauga, Ontario Canada L5R 3V5 ● 1.888.256.7551www.contrac.ca
760mm735mm
(29") Min.
295mm(3⅛")230mm(9") Min.
Revised: January 2014
© Copyright Contrac® 2014. All rights reserved.
This catalogue contains information on a variety of our vitreous china products distributed by Contrac®. While the informationcontained in this catalogue was believed to be accurate at the time of printing, it is not guaranteed to be so, and it is subject to change. Please contact
a Contrac® customer service representative should you require in-depth information on aproduct or its application.
1.888.256.7551 www.contrac.ca
5970 Chedworth Way, Unit A, Mississauga, Ontario, Canada L5R 3V5www.contrac.ca