Upload
foremost-canada
View
265
Download
13
Embed Size (px)
DESCRIPTION
2015 Contrac Catalogue
Citation preview
2015 full line catalogue
www.contrac.ca
product index
slow closeRound Front.........59
Elongated Front...61
regularRound Front.........63
Elongated Front...65
Cale..........................67
Cambrie..................69
Kolby.....................93
Cornell.....................95
Carlo....................97
Carlton....................99
Colter.....................101
Clay.....................103
Clark......................105
Cleo........................107
Chane....................109
Caledon.................111
4.8lpf Carlin..........................3
Caven®......................5
Cody®.........................7
Crista®.......................9
6lpf Carlin..........................11
Cody®.........................13
Crista®.......................15
Tanks4.8L / 6L....................17
4.8/3lpfCarson......................19
Camri........................21
Cullen.......................23
3.8lpfCadell.......................25
Cato..........................27
Clancy......................29
Case..........................31
4.8lpfChloe........................45
Caden.......................47
Caldwell..................49
total toiletsCarlin 4.8Lpf...........33
Caven® 4.8Lpf.........35
Cody® 4.8Lpf...........37
Crista® 4.8Lpf..........39
Carson 4.8/3Lpf.....41
Carlin 6Lpf..............43
drop-inCatalina®.................71
Cailyn.......................73
Curtis........................75
light commercial products
undermountConnor.....................77
Calvin.......................79
Camden..................81
Catena....................83
Collette...................85
concealedCali®.........................55
Cayla.......................57
4.8/3lpfClaire........................51
Canby.......................53
Chelsea.................113
Cassidy...................115
Carmin.....................117
Clayton....................119
Hygienic Sink........121
2pctoilets
sinks
lcp
1pctoilets
toiletseats
bidets
pedestalsCaprice....................87
Carley®.....................89
Calena.....................91
Issued: October 2015
www.contrac.caPage 3
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
High efficiency toilet
Round front bowl
Vitreous china
15½" Bowl height
Chrome tank lever
12" Rough-in
2" Fully glazed ball pass trapway
Siphon jet flush action
Water surface 8¼" x 6⅛"
17¼"(W) x 26⅜"(D) x 30⅛"(H)
IAPMO cUPC
US EPA WaterSense
ASME A112.19.2 / CSA B45.1-2008
MaP tested 1000g
LEED Compliant
CERTIFICATIONS
FEATURES
Not Included
COLOUR
TOILET SEAT
Soft white
BOWL4722BFV
LINED TANK4721BFV
UNLINED TANK4721BFVU
4.8Lpf2pc toiletCarlin
Notes:The drawing below shows a rough-in at a minimum dimension of 305mm (12") from finished wall to C/L ofoutlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibilityis assumed for use of superseded or voided pages.
*For additional component options and specifications, please visit www.contrac.ca*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· High efficiency toilet
· 4.8Lpf / 1.28Gpf
· Round front bowl
· Vitreous china
· 15½" Bowl height
· Chrome tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Water surface (209mm x 155mm) 8¼" x 6⅛"
· Toilet seat not included
Overall Dimensions:
440mm(W) x 670mm(D) x 765mm(H)
17¼"(W) x 26⅜"(D) x 30⅛"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 /
CSA B45.1-2008
· MaP tested 1000g
· LEED Compliant
Shipping:
Tank 1.93 cube 34 lbs (GW)
Bowl 3.38 cube 46 lbs (GW)
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
4722BFV Bowl4721BFV Lined Tank4721BFVU Unlined Tank
Finished Wall
C/L of OutletFinished Floor
440mm(17¼")
350mm(13¾")
356mm(14")
235mm(9¼")
765mm(30⅛")
393mm(15½")
500mm(19⅝")305mm(12")
420mm(16½")
C/L of seat post holes140mm(5½")
670mm(26⅜")10mm(⅜")
630mm(25")
204mm(8")
CARLIN4.8Lpf / 1.28Gpf 2PC ROUND FRONT
REGULAR HEIGHT
Revised: June 2015 5970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 5
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
High efficiency toilet
Round front bowl
Vitreous china
17" Plus Height bowl
Chrome tank lever
12" Rough-in
2" Fully glazed ball pass trapway
3" Flapper
Siphon jet flush action
Water surface 8⅝" x 6¼"
17¼"(W) x 27⅝"(D) x 31½"(H)
IAPMO cUPC
US EPA WaterSense
ADA Guidelines & ANSI A117.1
ASME A112.19.2 / CSA B45.1-2008
MaP tested 800g
LEED Compliant
CERTIFICATIONS
FEATURES
Not Included
COLOUR
TOILET SEAT
Soft white
BOWL4722BRV
LINED TANK4721BFV
UNLINED TANK4721BFVU
4.8Lpf2pc toiletCaven®
Notes:The drawing below shows a rough-in at a minimum dimension of 305mm (12") from finished wall to C/L ofoutlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibilityis assumed for use of superseded or voided pages.
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to complywith the local disability codes and standards prior to installing the product.
*For additional component options and specifications, please visit www.contrac.ca*Bone and Biscuit available through Direct import (CIF) only.
Product Specs: · High efficiency toilet
· 4.8Lpf / 1.28Gpf
· Round front bowl
· Vitreous china
· 17" Plus Height bowl
· Chrome tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Water surface
· Toilet seat not included
Overall Dimensions: 440mm(W) x 702mm(D) x 800mm(H)
Compliance Certifications:Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 /
CSA B45.1-2008
· ADA Guidelines &
ANSI A117.1
· MaP tested 800g
· LEED Compliant
Shipping:Tank 1.93 cube 34 lbs (GW)
Bowl 4.6 cube 56 lbs (GW)
4722BRV Bowl4721BFV Lined Tank4721BFVU Unlined Tank
FinishedWall
C/L of OutletFinished Floor
350mm(13¾")
356mm(14")
247mm(9¾")
800mm
432mm(17")
528mm(20¾")305mm(12")
C/L of seat post holes
660mm(26")
204mm(8")
CAVEN®4.8Lpf / 1.28Gpf 2PC 17" HIGH ROUND FRONT
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Revised: June 2015 5970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 7
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
High efficiency toilet
Elongated bowl
Vitreous china
15½" Bowl height
Chrome tank lever
12" Rough-in
2" Fully glazed ball pass trapway
3" Flapper
Siphon jet flush action
Water surface 8½" x 6½"
17¼"(W) x 28½"(D) x 30"(H)
IAPMO cUPC
US EPA WaterSense
ASME A112.19.2 / CSA B45.1-2008
MaP tested 800g
LEED Compliant
CERTIFICATIONS
FEATURES
Not Included
COLOUR
TOILET SEAT
Soft white
BOWL4722BEV
LINED TANK4721BFV
UNLINED TANK4721BFVU
4.8Lpf2pc toiletCody®
Notes:
4722BEV Bowl4721BFV Lined Tank4721BFVU Unlined Tank
520mm(20½")
440mm(17¼")
350mm(13¾")
356mm(14")
245mm( ")
760mm(30")
393mm(15½")
725mm(28½")
C/L of Seat Post Holes140mm(5½")
690mm(27 ")
Finished Floor
305mm(12")
C/L of Outlet
204mm(8")
FinishedWall
10mm( ")
470mm(18½")
CODY®4.8Lpf / 1.28Gpf 2PC ELONGATED
REGULAR HEIGHT
The drawing below shows a rough-in at a minimum dimension of 305mm (12") from finished wall to C/L ofoutlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibilityis assumed for use of superseded or voided pages.
*For additional component options and specifications, please visit www.contrac.ca*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· High efficiency toilet
· 4.8Lpf / 1.28Gpf
· Elongated bowl
· Vitreous china
· 15½" Bowl height
· Chrome tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Water surface (216mm x 165mm) 8½" x 6½"
· Toilet seat not included
Overall Dimensions:
440mm(W) x 725mm(D) x 760mm(H)
17¼"(W) x 28½"(D) x 30"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 /
CSA B45.1-2008
· MaP tested 800g
· LEED Compliant
Shipping:
Tank 1.93 cube 34 lbs (GW)
Bowl 3.58 cube 48 lbs (GW)
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 9
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
High efficiency toilet
Elongated bowl
Vitreous china
17" Plus Height bowl
Chrome tank lever
12" Rough-in
2" Fully glazed ball pass traway
3" Flapper
Siphon jet flush action
Water surface 8½" x 6⅛"
17¼"(W) x 29⅛"(D) x 31"(H)
IAPMO cUPC
US EPA WaterSense
ADA Guidelines & ANSI A117.1
ASME A112.19.2 / CSA B45.1-2008
MaP tested 1000g
LEED Compliant
CERTIFICATIONS
FEATURES
Not Included
COLOUR
TOILET SEAT
Soft white
BOWL4722BHV
LINED TANK4721BFV
UNLINED TANK4721BFVU
4.8Lpf2pc toiletCrista®
Notes:The drawing below shows a rough-in at a minimum dimension of 305mm (12") from finished wall to C/L ofoutlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibilityis assumed for use of superseded or voided pages.
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to complywith the local disability codes and standards prior to installing the product.
*For additional component options and specifications, please visit www.contrac.ca*Bone and Biscuit available through Direct import (CIF) only.
4722BHV Bowl4721BFV Lined Tank4721BFVU Unlined Tank
Product Specs: · High efficiency toilet
· 4.8Lpf / 1.28Gpf
· Elongated bowl
· Vitreous china
· 17" Plus Height bowl
· Chrome tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Water surface (216mm x 155mm) 8½" x 6⅛"
· Toilet seat not included
Overall Dimensions: 440mm(W) x 740mm(D) x 790mm(H)
17¼"(W) x 29⅛"(D) x 31"(H)
Compliance Certifications: Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 /
CSA B45.1-2008
· ADA Guidelines &
ANSI A117.1
· MaP tested 1000g
· LEED Compliant
Shipping:Tank 1.93 cube 34 lbs (GW)
Bowl 3.96 cube 50 lbs (GW)
520mm(20½")
440mm(17¼")
350mm(13¾")
356mm(14")
245mm(9⅝")
790mm(31")
432mm(17")
740mm(29⅛")
C/L of Seat Post Holes140mm(5½")
470mm(18½")
695mm(27⅜")
Finished Floor
305mm(12")
C/L of Outlet
204mm(8")
10mm(⅜")
Finished Wall
CRISTA®4.8Lpf / 1.28Gpf 2PC 17" HIGH ELONGATED
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Revised: June 2015 5970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 11
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Low consumption toilet
Round front bowl
Vitreous china
15½" Bowl height
Chrome tank lever
12" Rough-in
2" Fully glazed ball pass trapway
Siphon jet flush action
Water surface 8¼" x 6¼"
17¼"(W) x 26⅜"(D) x 30⅛"(H)
IAPMO cUPC
ASME A112.19.2 / CSA B45.1-2008
MaP tested 800g
LEED Compliant
CERTIFICATIONS
FEATURES
Not Included
COLOUR
TOILET SEAT
Soft white
BOWL4722BFT
LINED TANK4721BFT
UNLINED TANK4721BFTU
6Lpf2pc toiletCarlin
Notes:The drawing below shows a rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*For additional component options and specifications, please visit www.contrac.ca*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· Low consumption toilet
· 6Lpf / 1.6Gpf
· Round front bowl
· Vitreous china
· 15½" Bowl height
· Chrome tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· Siphon jet flush action
· Water surface (210mm x 156mm) 8¼" x 6¼ "
· Toilet seat not included
Overall Dimensions:
440mm(W) x 670mm(D) x 765mm(H)
17¼"(W) x 26⅜"(D) x 30⅛"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
· MaP tested 800g
· LEED Compliant
Shipping:
Tank 1.93 cube 34 lbs (GW)
Bowl 3.38 cube 46 lbs (GW)
4722BFT Bowl4721BFT Lined Tank4721BFTU Unlined Tank
CARLIN6Lpf / 1.6Gpf 2PC ROUND FRONT
REGULAR HEIGHT
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
C/L of OutletFinished Floor
440mm(17¼")
350mm(13¾")
356mm(14")
235mm(9¼")
765mm(30⅛")
393mm(15½")
500mm(19⅝")305mm(12")
420mm(16½")
C/L of seat post holes140mm(5½")
670mm(26⅜")10mm(⅜")
630mm(25")
204mm(8")
Revised: June 2015 5970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
Finished Wall
www.contrac.caPage 13
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Cody®BOWL
4722BETLINED TANK4721BFT
UNLINED TANK4721BFTU
6Lpf2pc toilet
Low consumption toilet
Elongated bowl
Vitreous china
15½" Bowl height
Chrome tank lever
12" Rough-in
2" Fully glazed ball pass trapway
Siphon jet flush action
Water surface 8½" x 6½"
17¼"(W) x 28½"(D) x 30"(H)
IAPMO cUPC
ASME A112.19.2 / CSA B45.1-2008
MaP tested 800g
LEED Compliant
CERTIFICATIONS
FEATURES
Not Included
COLOUR
TOILET SEAT
Soft white
Notes:The drawing below shows a rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*For additional component options and specifications, please visit www.contrac.ca*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· Low consumption toilet
· 6Lpf / 1.6Gpf
· Elongated bowl
· Vitreous china
· 15½" Bowl height
· Chrome tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· Siphon jet flush action
· Water surface (218mm x 165mm) 8½" x 6½"
· Toilet seat not included
Overall Dimensions: 440mm(W) x 725mm(D) x 760mm(H)
17¼"(W) x 28½"(D) x 30"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
· MaP tested 800g
· LEED Compliant
Shipping:
Tank 1.93 cube 34 lbs (GW)
Bowl 3.58 cube 48 lbs (GW)
4722BET Bowl4721BFT Lined Tank4721BFTU Unlined Tank
CODY®6Lpf / 1.6Gpf 2PC ELONGATED
REGULAR HEIGHT
520mm(20½")
440mm(17¼")
350mm(13¾")
356mm(14")
245mm(9⅝")
760mm(30")
393mm(15½")
725mm(28½")
C/L of Seat Post Holes140mm(5½")
690mm(27⅛")
Finished Floor
305mm(12")
C/L of Outlet
204mm(8")
Finished Wall
10mm(⅜")
470mm(18½")
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 15
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Low consumption toilet
Elongated bowl
Vitreous china
17" Plus Height bowl
Chrome tank lever
12" Rough-in
2" Fully glazed ball pass trapway
Siphon jet flush action
Water surface 9½" x 6¼"
17¼"(W) x 29⅛"(D) x 31"(H)
IAPMO cUPC
ASME A112.19.2 / CSA B45.1-2008
ADA Guidelines & ANSI A117.1
MaP tested 800g
LEED Compliant
CERTIFICATIONS
FEATURES
Not Included
COLOUR
TOILET SEAT
Soft white
BOWL4722BIT
LINED TANK4721BFT
UNLINED TANK4721BFTU
6Lpf2pc toiletCrista®
Notes:The drawing below shows a rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to complywith the local disability codes and standards prior to installing the product.
*For additional component options and specifications, please visit www.contrac.ca*Bone and Biscuit available through Direct import (CIF) only.
4722BIT Bowl4721BFT Lined tank4721BFTU Unlined tank
Product Specs:
· Low consumption toilet · 6Lpf / 1.6Gpf · Elongated bowl · Vitreous china · 17" Plus Height bowl · Chrome tank lever
· 12" (305mm) Rough-in · 2" Fully glazed ball pass trapway · Siphon jet flush action
· Water surface (240mm x 160mm) 9½" x 6¼" · Toilet seat not included
Overall Dimensions: 440mm(W) x 740mm(D) x 790mm(H) 17¼"(W) x 29⅛"(D) x 31"(H)
Compliance Certifications:
Meets or exceeds the following: · IAPMO cUPC · ASME A112.19.2 / CSA B45.1-2008 · ADA Guidelines & ANSI A117.1 · MaP tested 800g · LEED Compliant
Shipping:
Tank 1.93 cube 34 lbs (GW)
Bowl 3.96 cube 50 lbs (GW)
CRISTA®6Lpf / 1.6Gpf 2PC 17" HIGH ELONGATED
520mm(20½")
440mm(17¼")
350mm(13¾")
356mm(14")
245mm(9⅝")
790mm(31")
432mm(17")
740mm(29⅛")
C/L of Seat Post Holes140mm(5½")
470mm(18½")
695mm(27⅜")
Finished Floor
305mm(12")
C/L of Outlet
204mm(8")
10mm(⅜")
Finished Wall
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Revised: June 2015 5970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 17
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible. Issued: October 2015www.contrac.caPage 17
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Right Hand Lever
4721BFTU-RHUnlined Tank
Low Profile Tank
4721BFVU-LTUnlined Tank
10" Rough-In
4700BFT Lined Tank4700BFTU
Unlined Tank
14" Rough-In
4724BFTLined Tank4724BFTU
Unlined Tank
10" Rough-In
4700BFVU Unlined Tank
14" Rough-In
4724BFV Lined Tank4724BFVU
Unlined Tank
• Soft White vitreous china.• All 6Lpf tanks are compatible with 6Lpf Carlin, Cody® and Crista® toilet bowls excluding Total Toilet models.
Locking Tank
4721BFT-LLined Tank4721BFTU-L
Unlined Tank
Right Hand Lever
4721BFVU-RHUnlined Tank
4.8Lpf Tanks
Locking Tank
4721BFV-LLined Tank4721BFVU-L
Unlined Tank
*For further details and specifications, please visit www.contrac.ca
• Soft White vitreous china.• All 4.8Lpf tanks are compatible with 4.8Lpf Carlin, Caven®, Cody® and Crista® toilet bowls excluding Total
Toilet models.
Tanks
6Lpf Tanks
© Copyright Contrac® 2015. All rights reserved.
This page intentionally left blank.
www.contrac.caPage 19
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
High efficiency dual flush toilet
Round front bowl
Vitreous china
15½" Bowl height
Soft white top push button
12" Rough-in
1¾" Fully glazed ball pass trapway
3" Dual flush valve
Siphon jet flush action
Water surface 8⅞" x 6¼"
17⅜"(W) x 27⅛"(D) x 31⅝"(H)
IAPMO cUPC
US EPA WaterSense
ASME A112.19.2 / CSA B45.1-2008
MaP Premium tested 1000g
LEED Compliant
Carson BOWL/LINED TANK4720BPW
BOWL/UNLINED TANK4720BPWU
4.8Lpf/3Lpf2pc toilet
CERTIFICATIONS
FEATURES
Not Included
COLOUR
TOILET SEAT
Soft white
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L ofoutlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ANSI standard A112.19.2. These measurements are subject to change or cancellation. No responsibilityis assumed for use of superseded or voided pages.
Product Specs:
· High efficiency dual flush toilet
· 4.8Lpf / 1.28Gpf or 3Lpf / 0.8Gpf
· Round front bowl
· Vitreous china
· 15½" Bowl height
· Soft white top push actuator
· 12" (305mm) Rough-in
· 1¾" Fully glazed ball pass trapway
· 3" Dual flush valve
· Siphon jet flush action
· Water surface (225mm x 160mm) 8⅞" x 6¼"
· Toilet seat not included
Overall Dimensions:
440mm(W) x 690mm(D) x 805mm(H)
173⁄8"(W) x 271⁄8"(D) x 31⅝"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 /
CSA B45.1-2013
· MaP Premium tested 1000g
· LEED Compliant
Shipping:
Cube 6.08
GW 78 lbs
4720BPW Lined Tank
4720BPWU Unlined Tank
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
440mm(173⁄8")
356mm(14")
356mm(14")
252mm(9⅞")
395mm(15½")
805mm(31⅝")
Finished Floor C/L of Outlet
530mm(20⅞")305mm(12")
420mm(16½")
657mm(25⅞")
690mm(271⁄8")205mm(8")
Finished Wall
C/L of Seat Post Holes140mm(5½")
10mm(⅜")
CARSON4.8Lpf / 3Lpf 2PC DUAL FLUSH
ROUND REGULAR HEIGHT
*Bone and Biscuit available through Direct import (CIF) only.
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 21
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Camri BOWL/LINED TANK4720BLW
BOWL/UNLINED TANK4720BLWU
CERTIFICATIONS
FEATURES
COLOUR
TOILET SEAT
Not Included
Soft white
High efficiency dual flush toilet
Elongated bowl
Vitreous china
15½" Bowl height
Soft white top push button
12" Rough-in
1¾" Fully glazed ball pass trapway
3" Dual flush valve
Siphon jet flush action
Water surface 8" x 6"
17⅜"(W) x 29¼"(D) x 31⅝"(H)
IAPMO cUPC
US EPA WaterSense
ASME A112.19.2 / CSA B45.1-2008
MaP Premium tested 800g
LEED Compliant
4.8Lpf/3Lpf2pc toilet
Notes:
4720BLW Lined Tank
4720BLWU Unlined Tank
440mm(173⁄8")
356mm(14")
803mm(31⅝")
253mm(9⅞")
356mm(14")
305mm(12")
395mm(15½")
743mm(29¼")
C/L of Seatpost holes
140mm(5½")
470mm(18½")
10mm(⅜")
719mm(28¼")
205mm(8")
515mm(20¼")
Finished Wall
C/L of OutletFinished Floor
CAMRI4.8Lpf / 3Lpf 2PC DUAL FLUSH
ELONGATED REGULAR HEIGHT
Product Specs:
· High efficiency dual flush toilet
· 4.8Lpf / 1.28Gpf or 3Lpf / 0.8Gpf
· Elongated bowl
· Vitreous china
· 15½" Bowl height
· Soft white top push button
· 12" (305mm) Rough-in
· 1¾" Fully glazed ball pass trapway
· 3" Dual flush valve
· Siphon jet flush action
· Water Surface (205mm x 150mm) 8" x 6"
· Toilet seat not included
Overall Dimensions:
440mm(W) x 743mm(D) x 803mm(H)
173⁄8"(W) x 29¼"(D) x 31⅝"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 /
CSA B45.1-2013
· MaP Premium tested 800g
· LEED Compliant
Shipping:Cube 6.41
GW 86.59 lbs
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L ofoutlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibilityis assumed for use of superseded or voided pages.
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
*Bone and Biscuit available through Direct import (CIF) only.
www.contrac.caPage 23
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Cullen BOWL/LINED TANK4720BNW
BOWL/UNLINED TANK4720BNWU
COLOUR
TOILET SEAT
Not Included
Soft white
High efficiency dual flush toilet
Elongated bowl
Vitreous china
17" Plus Height bowl
Soft white top push button
12" Rough-in
1¾" Fully glazed ball pass trapway
3" Dual flush valve
Siphon jet flush action
Water surface 9½" x 6½"
17⅜"(W) x 29½"(D) x 31½"(H)
IAPMO cUPC
US EPA WaterSense
ASME A112.19.2 / CSA B45.1-2008
MaP Premium tested 800g
LEED Compliant
FEATURES
CERTIFICATIONS
4.8Lpf/3Lpf2pc toilet
4720BNW Lined Tank
4720BNWU Unlined Tank
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
10mm(⅜")
305mm(12")
440mm(173/8")
800mm(31½")
432mm(17")
C/L of Seatpost holes
140mm(5½")
750mm(29½")
470mm(18½")
531mm(21")
717mm(28¼")
205mm(8")
356mm(14")
356mm(14")
255mm(10")
Finished Floor
C/L of Outlet
Product Specs:
· High efficiency dual flush toilet
· 4.8Lpf / 1.28Gpf or 3Lpf / 0.8Gpf
· Elongated bowl
· Vitreous china
· 17" Plus Height bowl
· Soft white top push button
· 12" (305mm) Rough-in
· 1¾" Fully glazed ball pass trapway
· 3" Dual flush valve
· Siphon jet flush action
· Water surface (240mm x 165mm) 9½" x 6½"
· Toilet seat not included
Overall Dimensions:
440mm(W) x 750mm(D) x 800mm(H)
173/8"(W) x 29½"(D) x 31½"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 / CSA B45.1-2013
· MaP Premium tested 800g
· LEED Compliant
Shipping:
Cube 6.44
GW 89.23 lbs
CULLEN
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
4.8Lpf / 3Lpf 2PC DUAL FLUSH ELONGATED 17” HEIGHT
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
*Bone and Biscuit available through Direct import (CIF) only.
Finished Wall
www.contrac.caPage 25
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
High efficiency toilet
Round front bowl
Vitreous china
15½" Bowl height
Soft white tank lever
12" Rough-in
1¾" Fully glazed ball pass trapway
3" Flapper
Siphon jet flush action
Water surface 8⅞" x 6¼"
17¼"(W) x 27⅛"(D) x 31⅝"(H)
IAPMO cUPC
US EPA WaterSense
ASME A112.19.2 / CSA B45.1-2008
MaP Premium tested 600g (Lined)
MaP Premium tested 800g (Unlined)
LEED Compliant
Cadell 3.8Lpf2pc toilet
Not Included
BOWL/LINED TANK5730BFV*
BOWL/UNLINED TANK5730BFVU
COLOUR
TOILET SEAT
Not Included
Soft white
FEATURES
CERTIFICATIONS
(Unlined tank)
*Direct import (CIF) only - Please contact your sales representative for further information
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L ofoutlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibilityis assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· High efficiency toilet
· 3.8Lpf / 1Gpf
· Round front bowl
· Vitreous china
· 15½" Bowl height
· Soft white tank lever
· 12" (305mm) Rough-in
· 1¾" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Water surface (225mm x 1 0mm) 8 " x "
· Toilet seat not included
Overall Dimensions:
440mm(W) x 690mm(D) x 803mm(H)
1 "(W) x 2 "(D) x 31 "(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 / CSA B45.1-2008
· MaP tested 600g
(Lined tank)
· MaP tested 800g
(Unlined tank)
· MaP Premium certified
· LEED Compliant
Shipping:
Cube 6.08
GW 97 lbs
Notes:
5730BFV Lined Tank
5730BFVU Unlined Tank
440mm(17 ")
803mm(31 ")
250mm(9 ")
356mm(14")
690mm(27 ")
530mm(20 ")
356mm(14")
394mm(15½")
C/L of Seatpost holes
140mm (5½")
420mm(16½")
10mm( ")202mm(8")
657mm(25 ")
C/L of OutletFinished floor
305mm(12")
CADELL3.8Lpf / 1Gpf 2PC ROUND FRONT
REGULAR HEIGHT
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
(Unlined Tank)
Finished Wall
CERTIFICATIONS
FEATURES
www.contrac.caPage 27
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Not Included
COLOUR
TOILET SEAT
Soft white
(Unlined tank)
High efficiency toilet
Elongated bowl
Vitreous china
15½" Bowl height
Soft white tank lever
12" Rough-in
1¾" Fully glazed ball pass trapway
3" Flapper
Siphon jet flush action
Water surface 8" x 6"
17¼"(W) x 29¼"(D) x 31½"(H)
IAPMO cUPC
US EPA WaterSense
ASME A112.19.2 / CSA B45.1-2008
MaP Premium tested 600g (Lined)
MaP Premium tested 800g (Unlined)
LEED Compliant
Cato BOWL/LINED TANK5730BEV*
BOWL/UNLINED TANK5730BEVU
FEATURES
CERTIFICATIONS
*Direct import (CIF) only - Please contact your sales representative for further information
3.8Lpf2pc toilet
Notes:
5730BEV Lined Tank5730BEVU Unlined Tank
440mm(17¼")
356mm(14")
803mm(31½")
392mm(15½")
744mm(29¼")
C/L of Seatpost holes
140mm (5½")
470mm(18½")
356mm(14")
253mm(9⅞") 515mm(20¼")
10mm(⅜")202mm(8")
719mm(28⅜")
C/L of OutletFinished floor
305mm(12")
Product Specs:
· High efficiency toilet
· 3.8Lpf / 1Gpf
· Elongated bowl
· Vitreous china
· 15½" Bowl height
· Soft white tank lever
· 12" (305mm) Rough-in
· 1¾" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Water surface (205mm x 150mm) 8" x 6"
· Toilet seat not included
Overall Dimensions:
440mm(W) x 744mm(D) x 803mm(H)
17¼"(W) x 29¼"(D) x 31½"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 /
CSA B45.1-2008
· MaP tested 600g
(Lined tank)
· MaP tested 800g
(Unlined tank)
· MaP Premium certified
· LEED Compliant
Shipping:
Cube 6.54
GW 92 lbs
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L ofoutlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibilityis assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
CATO3.8Lpf / 1Gpf 2PC ELONGATED
REGULAR HEIGHT
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
(Unlined Tank)
Finished Wall
www.contrac.caPage 29
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
CERTIFICATIONS
FEATURES
COLOUR TOILET SEAT
Not Included
Soft white
High efficiency toilet
Round front bowl
Vitreous china
17" Plus Height bowl
Soft white tank lever
12" Rough-in
1¾" Fully glazed ball pass trapway
3" Flapper
Siphon jet flush action
Water surface 8⅝" x 6¼"
17¼"(W) x 27⅝"(D) x 31½"(H)
IAPMO cUPC
US EPA WaterSense
ASME A112.19.2 / CSA B45.1-2008
ADA Guidelines & ANSI A117.1
MaP Premium tested 600g (Lined)
MaP Premium tested 800g (Unlined)
LEED Compliant
Clancy BOWL/LINED TANK5730BIV*
BOWL/UNLINED TANK5730BIVU
(Unlined tank)
*Direct import (CIF) only - Please contact your sales representative for further information
3.8Lpf2pc toilet
Product Specs:
· High efficiency toilet
· 3.8Lpf / 1Gpf
· Round front bowl
· Vitreous china
· 17" Plus Height bowl
· Soft white tank lever
· 12" (305mm) Rough-in
· 1¾" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· ater Surface (220mm 1 0mm) 8 " "
· Toilet seat not included
Overall Dimensions:
440mm(W) x 702mm(D) x 800mm(H)
17 "(W) x 27 "(D) x 31 "(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 / CSA B45.1-2008
· ADA Guidelines & ANSI A117.1
· MaP Tested 600g
(Lined tank)
· MaP Tested 800g
(Unlined tank)
· MaP Premium certified
· LEED Compliant
Shipping:
Cube 6.38
GW 89 lbs
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Products are designed to comply ADA / ANSI A117.1 Standard. It shall be the responsibility of the installer to complywith the local disability codes and standards prior to installing the product.
*Bone and Biscuit available through Direct import (CIF) only.
5730BIV Lined Tank5730BIVU Unlined Tank
CLANCY3.8Lpf / 1Gpf 2PC 17" HIGH ROUND FRONT
305mm(12")
440mm(17 ")
356mm(14")
800mm(31 ")
430mm(17")
702mm(27 ")
C/L of Seatpost holes
140mm (5 ")
420mm(16 ")
356mm(14")
245mm(9 " ) 528mm(20 ")
10mm( ")
202mm(8")
660mm(26")
C/L of OutletFinished floor
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
(Unlined Tank)
Finished Wall
www.contrac.caPage 31
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
CERTIFICATIONS
FEATURES
COLOUR TOILET SEAT
Not Included
Soft white
High efficiency toilet
Elongated bowl
Vitreous china
17" Plus Height bowl
Soft white tank lever
12" Rough-in
1¾" Fully glazed ball pass trapway
3" Flapper
Siphon jet flush action
Water surface 8⅝" x 6⅝"
17¼"(W) x 29⅝"(D) x 31½"(H)
IAPMO cUPC
US EPA WaterSense
ASME A112.19.2 / CSA B45.1-2008
ADA Guidelines & ANSI A117.1
MaP Premium tested 600g (Lined)
MaP Premium tested 800g (Unlined)
LEED Compliant
Case BOWL/LINED TANK5730BOV*
BOWL/UNLINED TANK5730BOVU
(Unlined tank)
*Direct import (CIF) only - Please contact your sales representative for further information
3.8Lpf2pc toilet
Product Specs:
· High efficiency toilet
· 3.8Lpf / 1Gpf
· Elongated bowl
· Vitreous china
· 17" Plus Height bowl
· Soft white tank lever
· 12" (305mm) Rough-in
· 1¾" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Toilet seat not included
· Water Surface (220mm x 170mm) 5⅝" x 6⅝"
Overall Dimensions:
440mm(W) x 754mm(D) x 802mm(H)
17¼"(W) x 29⅝"(D) x 31½"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 / CSA B45.1-2008
· ADA Guidelines & ANSI A117.1
· MaP tested 600g
(Lined tank)
· MaP tested 800g
(Unlined tank)
· MaP Premium certified
· LEED Compliant
Shipping:
Cube
GW 91 lbs
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Products are designed to comply ADA / ANSI A117.1 Standard. It shall be the responsibility of the installer to complywith the local disability codes and standards prior to installing the product.
*Bone and Biscuit available through Direct import (CIF) only.
5730BOV Lined Tank5730BOVU Unlined Tank
CASE3.8Lpf / 1Gpf 2PC 17" HIGH ELONGATED
305mm(12")
440mm(17¼")
(14")
802mm430mm
(17")
C/L of Seatpost holes
250mm( ) 531mm(21")
202mm(8")
717mm(28")
Finished wall
C/L of OutletFinished floor
Colours To Be Specified:Colour: Soft White
Bone (055)*
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
(Unlined Tank)
www.contrac.caPage 33
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
INCLUDED IN THE BOX
FEATURES
CERTIFICATIONS
High efficiency toilet
Round front bowl
Vitreous china
15½" Bowl height
Chrome tank lever
12" Rough-in
2" Fully glazed ball pass trapway
3" Flapper
Siphon jet flush action
Water surface 8¼" x 6⅛"
17¼"(W) x 26⅜"(D) x 30⅛"(H)
IAPMO cUPC
US EPA WaterSense
ASME A112.19.2 / CSA B45.1-2008
MaP tested 1000g
LEED Compliant
Total Toilet Carlin 4.8Lpf2pc toilet
BOWL/LINED TANK4720BFV-TT
Closet bolts, bolt covers, wax ring
and premium plastic toilet seat
COLOURS TOILET SEATSoft white
*Direct import (CIF) only - Please contact your sales representative for further information
Included
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L ofoutlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibilityis assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· High efficiency toilet
· 4.8Lpf / 1.28Gpf
· Round front bowl
· Vitreous china
· 15½" Bowl height
· Chrome tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Water surface (209mm x 155mm) 8¼" x 6⅛"
· Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat
Overall Dimensions:
440mm(W) x 670mm(D) x 765mm(H)
17¼"(W) x 26⅜"(D) x 30⅛"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 /
CSA B45.1-2008
· MaP tested 1000g
· LEED Compliant
Shipping:
Cube 5.89
GW 80 lbs
4720BFV-TT Lined TankDirect Import (CIF) Only
C/L of OutletFinished Floor
440mm(17¼")
350mm(13¾")
356mm(14")
235mm(9¼")
765mm(30⅛")
393mm(15½")
500mm(19⅝")305mm(12")
420mm(16½")
C/L of seat post holes140mm(5½")
670mm(26⅜")10mm(⅜")
630mm(25")
204mm(8")
TOTAL TOILET CARLIN4.8Lpf / 1.28Gpf 2PC ROUND FRONT
REGULAR HEIGHT
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
Finished Wall
www.contrac.caPage 35
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Total Toilet Caven®4.8Lpf2pc toilet
BOWL/LINED TANK
4720BRV-TT
INCLUDED IN THE BOX
FEATURES
CERTIFICATIONS
Closet bolts, bolt covers, wax ring
and premium plastic toilet seat
High efficiency toilet
Round front bowl
Vitreous china
17" Plus Height bowl
Chrome tank lever
12" Rough-in
2" Fully glazed ball pass trapway
3" Flapper
Siphon jet flush action
Water surface 8⅝" x 6¼"
17¼"(W) x 27⅝"(D) x 31½"(H)
IAPMO cUPC
US EPA WaterSense
ADA Guidelines & ANSI A117.1
ASME A112.19.2 / CSA B45.1-2008
MaP tested 800g
LEED Compliant
COLOUR TOILET SEAT
Included
Soft white
*Direct import (CIF) only - Please contact your sales representative for further information
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L ofoutlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibilityis assumed for use of superseded or voided pages.
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to complywith the local disability codes and standards prior to installing the product.
*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· High efficiency toilet
· 4.8Lpf / 1.28Gpf
· Round front bowl
· Vitreous china
· 17" Plus Height bowl
· Chrome tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Water surface (220mm x 160mm) 8⅝" x 6¼"
· Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat
Overall Dimensions:
440mm(W) x 702mm(D) x 800mm(H)
17¼"(W) x 27⅝"(D) x 31½"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 /
CSA B45.1-2008
· ADA Guidelines &
ANSI A117.1
· MaP tested 800g
· LEED Compliant
Shipping:
Cube 6.38
GW 89 lbs
4720BRV-TT Lined TankDirect Import (CIF) Only
C/L of OutletFinished Floor
440mm(17¼")
350mm(13¾")
356mm(14")
247mm(9¾")
800mm(31½")
432mm(17")
528mm(20¾")305mm(12")
420mm(16½")
C/L of seat post holes140mm(5½")
702mm(27⅝")10mm(⅜")
660mm(26")
204mm(8")
TOTAL TOILET CAVEN®4.8Lpf / 1.28Gpf 2PC 17" HIGH ROUND FRONT
445mm(17½")
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
Finished Wall
www.contrac.caPage 37
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Total Toilet Cody®4.8Lpf2pc toilet
BOWL/LINED TANK
4720BEV-TT
High efficiency toilet
Elongated bowl
Vitreous china
15½" Bowl height
Chrome tank lever
12" Rough-in
2" Fully glazed ball pass trapway
3" Flapper
Siphon jet flush action
Water surface 8½" x 6½"
17¼"(W) x 28½"(D) x 30"(H)
IAPMO cUPC
US EPA WaterSense
ASME A112.19.2 / CSA B45.1-2008
MaP tested 800g
LEED Compliant
INCLUDED IN THE BOX
FEATURES
CERTIFICATIONS
Closet bolts, bolt covers, wax ring
and premium plastic toilet seat
COLOUR TOILET SEAT
Included
Soft white
*Direct import (CIF) only - Please contact your sales representative for further information
Notes:
4720BEV-TT Lined TankDirect Import (CIF) Only
520mm(20½")
440mm(17¼")
350mm(13¾")
356mm(14")
245mm(9⅝")
760mm(30")
393mm(15½")
725mm(28½")
C/L of Seat Post Holes140mm(5½")
690mm(27⅛")
Finished Floor
305mm(12")
C/L of Outlet
204mm(8")
Finished Wall
10mm(⅜")
470mm(18½")
TOTAL TOILET CODY®4.8Lpf / 1.28Gpf 2PC ELONGATED
REGULAR HEIGHT
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L ofoutlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibilityis assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· High efficiency toilet
· 4.8Lpf / 1.28Gpf
· Elongated bowl
· Vitreous china
· 15½" Bowl height
· Chrome tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Water surface (216mm x 165mm) 8½" x 6½"
· Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat
Overall Dimensions:
440mm(W) x 725mm(D) x 760mm(H)
17¼"(W) x 28½"(D) x 30"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 /
CSA B45.1-2008
· MaP tested 800g
· LEED Compliant
Shipping:
Cube 6.51
GW 89 lbs
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 39
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Included
High efficiency toilet
Elongated bowl
Vitreous china
17" Plus Height bowl
Chrome tank lever
12" Rough-in
2" Fully glazed ball pass trapway
3" Flapper
Siphon jet flush action
Water surface 8½" x 6⅛"
17¼"(W) x 29⅛"(D) x 31"(H)
Total Toilet Crista®4.8Lpf2pc toilet
BOWL/LINED TANK
4720BHV-TT
IAPMO cUPC
US EPA WaterSense
ADA Guidelines & ANSI A117.1
ASME A112.19.2 / CSA B45.1-2008
MaP tested 1000g
LEED Compliant
INCLUDED IN THE BOX
FEATURES
Closet bolts, bolt covers, wax ring
and premium plastic toilet seat
COLOUR TOILET SEATSoft white
CERTIFICATIONS
*Direct import (CIF) only - Please contact your sales representative for further information
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L ofoutlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibilityis assumed for use of superseded or voided pages.
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to complywith the local disability codes and standards prior to installing the product.
*Bone and Biscuit available through Direct import (CIF) only.
4720BHV-TT Lined TankDirect Import (CIF) Only
Product Specs:
· High efficiency toilet
· 4.8Lpf / 1.28Gpf
· Elongated bowl
· Vitreous china
· 17" Plus Height bowl
· Chrome tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Water surface (216mm x 155mm) 8½" x 6⅛"
· Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat
Overall Dimensions:
440mm(W) x 740mm(D) x 790mm(H)
17¼"(W) x 29⅛"(D) x 31"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 /
CSA B45.1-2008
· ADA Guidelines &
ANSI A117.1
· MaP tested 1000g
· LEED Compliant
Shipping:
Cube 7.0
GW 91 lbs
520mm(20½")
440mm(17¼")
350mm(13¾")
356mm(14")
245mm(9⅝")
790mm(31")
432mm(17")
740mm(29⅛")
C/L of Seat Post Holes140mm(5½")
470mm(18½")
695mm(27⅜")
Finished Floor
305mm(12")
C/L of Outlet
204mm(8")
10mm(⅜")
TOTAL TOILET CRISTA®4.8Lpf / 1.28Gpf 2PC 17" HIGH ELONGATED
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
Finished Wall
www.contrac.caPage 41
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
High efficiency dual flush toilet
Round front bowl
Vitreous china
15½" Bowl height
Soft white top push button
12" Rough-in
1¾" Fully glazed ball pass trapway
3" Flapper
Siphon jet flush action
Water surface 8⅞" x 6¼"
17¼"(W) x 27⅛"(D) x 31⅝"(H)
IAPMO cUPC
US EPA WaterSense
ASME A112.19.2 / CSA B45.1-2008
MaP Premium tested 1000g
LEED Compliant
Total Toilet Carson BOWL/LINED TANK
4720BPW-TT4.8Lpf/3Lpf
2pc toilet
INCLUDED IN THE BOX
FEATURES
CERTIFICATIONS
Closet bolts, bolt covers, wax ring
and premium plastic toilet seat
COLOUR TOILET SEAT
Included
Soft white
*Direct import (CIF) only - Please contact your sales representative for further information
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L ofoutlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibilityis assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· High efficiency dual flush toilet
· 4.8Lpf / 1.28Gpf or 3Lpf / 0.8Gpf
· Round front bowl
· Vitreous china
· 15½" Bowl height
· Soft white top push button
· 12" (305mm) Rough-in
· 1¾" Fully glazed ball pass trapway
· 3" Dual flush valve
· Siphon jet flush action
· Water surface (225mm x 160mm) 8⅞" x 6¼"
· Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat
Overall Dimensions:
440mm(W) x 690mm(D) x 805mm(H)
17¼"(W) x 27⅛"(D) x 31⅝"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 /
CSA B45.1-2013
· MaP tested 1000g
· MaP Premium certified
· LEED Compliant
Shipping:
Cube 6.08
GW 78 lbs
4720BPW-TT Lined TankDirect Import (CIF) Only
440mm(17¼")
356mm(14")
356mm(14")
252mm(9⅞")
395mm(15½")
805mm(31⅝")
Finished Floor C/L of Outlet
530mm(20⅞")305mm(12")
420mm(16½")
657mm(25⅞")
690mm(27⅛")204mm(8")
C/L of Seat Post Holes140mm(5½")
10mm(⅜")
TOTAL TOILET CARSON4.8Lpf OR 3Lpf 2PC ROUND FRONT
DUAL FLUSH REGULAR HEIGHT
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
Finished Wall
www.contrac.caPage 43
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
IAPMO cUPC
ASME A112.19.2 / CSA B45.1-2008
MaP tested 800g
LEED Compliant
Total Toilet Carlin 6Lpf2pc toilet
Closet bolts, bolt covers, wax ring
and premium plastic toilet seat
BOWL/LINED TANK4720BFT-TT
INCLUDED IN THE BOX
FEATURES
Low consumption toilet
Round front bowl
Vitreous china
15½" Bowl height
Chrome tank lever
12" Rough-in
2" Fully glazed ball pass trapway
Siphon jet flush action
Water surface 8¼" x 6¼"
17¼"(W) x 26⅝"(D) x 30⅛"(H)
CERTIFICATIONS
COLOUR
TOILET SEAT
Included
Soft white
*Direct import (CIF) only - Please contact your sales representative for further information
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· Low consumption toilet
· 6Lpf / 1.6Gpf
· Round front bowl
· Vitreous china
· 15½" Bowl height
· Chrome tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· Siphon jet flush action
· Water surface (210mm x 156mm) 8¼" x 6¼ "
· Included in the box: closet bolts, bolt covers, wax ring and premium plastic toilet seat
Overall Dimensions:
440mm(W) x 670mm(D) x 765mm(H)
17¼"(W) x 26⅝"(D) x 30⅛"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
· MaP tested 800g
· LEED Compliant
Shipping:
Cube 5.89
GW 80 lbs
4720BFT-TT Lined TankDirect Import (CIF) Only
TOTAL TOILET CARLIN6Lpf / 1.6Gpf 2PC ROUND FRONT
REGULAR HEIGHT
C/L of OutletFinished Floor
440mm(17¼")
350mm(13¾")
356mm(14")
235mm(9¼")
765mm(30⅛")
393mm(15½")
500mm(19⅝")305mm(12")
420mm(16½")
C/L of seat post holes140mm(5½")
670mm(26⅝")10mm(⅜")
630mm(25")
204mm(8")
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
Finished Wall
www.contrac.caPage 45
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
High efficiency toilet
Round front bowl
Vitreous china
15¾" Bowl height
Chrome tank lever
12" Rough-in
2" Fully glazed ball pass trapway
3" Flapper
Siphon jet flush action
Water surface 8¼" x 6"
16⅞"(W) x 26½"(D) x 27⅛"(H)
IAPMO cUPC
US EPA WaterSense
ASME A112.19.2 / CSA B45.1-2008
MaP tested 800g
LEED Compliant
Chloe LINED TANK4710BFV
4.8Lpf1pc toilet
Not Included
COLOUR
TOILET SEAT
Not Included
Soft white
FEATURES
CERTIFICATIONS
Product Specs:
· High efficiency toilet
· 4.8Lpf / 1.28Gpf
· Round front bowl
· Vitreous china
· 15¾" Bowl height
· Chrome tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Water Surface (209mm x 150mm) 8¼" x 6"
· Toilet seat not included
Overall Dimensions:
429mm(W) x 672mm(D) x 689mm(H)
16⅞"(W) x 26½"(D) x 27⅛"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 / CSA B45.1-2008
· MaP Tested 800g
· LEED Compliant
Shipping:
Cube 8.29
GW 89 lbs
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
429mm(16⅞")
689mm(27⅛")
265mm(10½")
Finished Wall
C/L of OutletFinished Floor
515mm(20¼")305mm(12")
400mm(15¾")
672mm(26½")10mm(⅜")
420mm(16½")
C/L of Seat Post Holes140mm(5½")
CHLOE4.8Lpf / 1.28Gpf 1PC ROUND FRONT REGULAR HEIGHT
4710BFV Lined Tank
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
*Bone and Biscuit available through Direct import (CIF) only.
www.contrac.caPage 47
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
High efficiency toilet
Elongated bowl
Vitreous china
15¾" Bowl height
Soft white tank lever
12" Rough-in
2" Fully glazed ball pass trapway
3" Flapper
Siphon jet flush action
Water surface 9" x 6¼"
Smooth close toilet seat included
16⅝"(W) x 28½"(D) x 26⅛"(H)
IAPMO cUPC
US EPA WaterSense
ASME A112.19.2 / CSA B45.1-2008
MaP tested 800g
LEED Compliant
Caden LINED TANK4710BEV-TS
4.8Lpf1pc toilet
Included
COLOUR
TOILET SEAT
Soft white
CERTIFICATIONS
FEATURES
Product Specs:
· High efficiency toilet
· 4.8Lpf / 1.28Gpf
· Elongated bowl
· Vitreous china
· 15¾" Bowl height
· Soft white tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Water Surface (230mm x 160mm) 9" x 6¼"
· Smooth close toilet seat included
Overall Dimensions:
423mm(W) x 723mm(D) x 663mm(H)
16⅝"(W) x 28½"(D) x 26⅛"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 / CSA B45.1-2008
· MaP Tested 800g
· LEED Compliant
Shipping:
Cube 7.25
GW 90 lbs
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
CADEN4.8Lpf / 1.28Gpf 1PC ELONGATED REGULAR HEIGHT
423mm(16⅝")
663mm(26⅛")
272mm(10¾")
Finished Wall
C/L of OutletFinished Floor
543mm(21⅜")305mm(12")
400mm(15¾")
723mm(28½")10mm(⅜")
470mm(18½")
C/L of Seat Post Holes140mm(5½")
4710BEV-TS Lined Tank
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
*Bone and Biscuit available through Direct import (CIF) only.
www.contrac.caPage 49
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Caldwell LINED TANK4710BIV
LINED LOCKING TANK4710BIV-L*
4.8Lpf1pc toilet
CERTIFICATIONS
FEATURES
*Direct import (CIF) only - Please contact your sales representative for further information
COLOUR TOILET SEAT
Not Included
Soft white
High efficiency toilet
Elongated bowl
Vitreous china
17" Plus Height bowl
Chrome top push button
Allen key locking mechanism (only
applicable on locking tank option)
12" Rough-in
2" Fully glazed ball pass trapway
3" Flush valve
Siphon jet flush action
Water surface 8⅝" x 6"
15"(W) x 29"(D) x 27¾"(H)
IAPMO cUPC
US EPA WaterSense
ADA Guidelines & ANSI A117.1
ASME A112.19.2 / CSA B45.1-2008
MaP tested 800g
LEED Compliant
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to complywith the local disability codes and standards prior to installing the product.
*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· High efficiency toilet
· 4.8Lpf / 1.28Gpf
· Elongated bowl
· Vitreous china
· 17" Plus Height bowl
· Chrome top push button
· Allen key locking mechanism (applicable only on locking tank option)
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· 3" Flush valve
· Siphon jet ush action
· ater Surface (220mm x 150mm) 8 " x "
· Toilet seat not included
Overall Dimensions:
380mm(W) x 735mm(D) x 705mm(H)
15"(W) x 29"(D) x 27¾"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 / CSA B45.1-2008
· ADA Guidelines & ANSI A117.1
· MaP tested 800g
· LEED Compliant
Shipping:
Cube 8.8
GW 85 lbs
380mm(15")
705mm(27¾")
35 mm(14")
255mm(10")
Finished Wall
C/L of OutletFinished Floor
5 0mm(22")305mm(12")
430mm(17")
735mm(29")200mm(8")
10mm( ")
C/L of Seat Post Holes140mm(5½")
470mm(18½")
CALDWELL4.8Lpf / 1.28Gpf 1PC 17" HIGH ELONGATED
4710BIV Lined Tank
4710BIV-L* Lined Locking Tank (optional)*Direct Import (CIF) Only
Optional
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (0 )*
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 51
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
*Direct import (CIF) only - Please contact your sales representative for further information
High efficiency dual flush toilet
Round front bowl
Vitreous china
15½" Bowl height
Soft white top push button
12" Rough-in
1¾" Fully glazed ball pass trapway
3" Dual flush valve
Siphon jet flush action
Water surface 8¼" x 6⅛"
15"(W) x 27"(D) x 28¾"(H)
Claire LINED TANK5710BFX
UNLINED TANK5710BFXU*
IAPMO cUPC
US EPA Watersense
ASME A112.19.2 / CSA B45.1-2008
MaP Premium tested 800g
LEED Compliant
CERTIFICATIONS
FEATURES
Not Included
COLOUR
TOILET SEAT
Soft white
4.8Lpf/3Lpf1pc toilet
Product Specs:
· High efficiency dual flush toilet
· 4.8Lpf / 1.28Gpf or 3Lpf / 0.8Gpf
· Round front bowl
· Vitreous china
· 15½" Bowl height
· Soft white top push button
· 12" (305mm) Rough-in
· 1¾" Fully glazed ball pass trapway
· 3" Dual flush valve
· Siphon jet flush action
· Water Surface (210mm x 155mm) 8¼" x 6⅛"
· Toilet seat not included
Overall Dimensions:
383mm(W) x 687mm(D) x 730mm(H)
15"(W) x 27"(D) x 28¾"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 / CSA B45.1-2008
· MaP Tested 800g
· MaP Premium certified
· LEED Compliant
Shipping:
Cube 7.50
GW 88 lbs
383mm(15")
730mm(28¾")
243mm(9½")
Finished Wall
C/L of OutletFinished Floor
557mm(22")305mm(12")
394mm(15½")
687mm(27")10mm(⅜")
C/L of Seat Post Holes
140mm(5½")
420mm(16½")
CLAIRE4.8Lpf / 1.28Gpf OR 3Lpf / 0.8Gpf 1PC ROUND FRONT
DUAL FLUSH REGULAR HEIGHT
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
5710BFX Lined Tank
5710BFXU* Unlined Tank*Direct Import (CIF) Only
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 53
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
CERTIFICATIONS
FEATURES
Not Included
COLOUR
TOILET SEAT
Soft white
Canby LINED TANK5710BEX
UNLINED TANK5710BEXU*
4.8Lpf/3Lpf1pc toilet
High efficiency dual flush toilet
Elongated bowl
Vitreous china
15½" Bowl height
Soft white top push button
12" Rough-in
1¾" Fully glazed ball pass trapway
3" Dual flush valve
Siphon jet flush action
Water Surface 8⅞" x 6½"
15⅛"(W) x 29¼"(D) x 28¾"(H)
IAPMO cUPC
US EPA WaterSense
ASME A112.19.2 / CSA B45.1-2008
MaP tested 800g
MaP Premium certified
LEED Compliant
*Direct import (CIF) only - Please contact your sales representative for further information
Product Specs:
· High efficiency dual flush toilet
· 4.8Lpf / 1.28Gpf or 3Lpf / 0.8Gpf
· Elongated bowl
· Vitreous china
· 15½" Bowl height
· Soft white top push button
· 12" (305mm) Rough-in
· 1¾" Fully glazed ball pass trapway
· 3" Dual flush valve
· Siphon jet flush action
· Water Surface (225mm x 165mm) 8⅞" x 6½"
· Toilet seat not included
Overall Dimensions:
385mm(W) x 742mm(D) x 730mm(H)
15⅛"(W) x 29¼"(D) x 28¾"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 / CSA B45.1-2008
· MaP Tested 800g
· MaP Premium certified
· LEED Compliant
Shipping:
Cube 8.23
GW 88 lbs
CANBY4.8Lpf / 1.28Gpf OR 3Lpf / 0.8Gpf 1PC DUAL FLUSH
ELONGATED REGULAR HEIGHT
l
385mm(15⅛")
730mm(28¾")
246mm(9⅝")
Finished Wal
C/L of OutletFinished Floor
560mm(22")305mm(12")
394mm(15½")
742mm(29¼")10mm(⅜")
470mm(18½")
C/L of Seat Post Holes140mm(5½")
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
5710BEX Lined Tank
5710BEXU* Unlined Tank*Direct Import (CIF) Only
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 55
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Cali UNLINED TANK4710BOVU
4.8Lpf1pc toilet
CERTIFICATIONS
FEATURES
COLOUR TOILET SEATSoft white
(Unlined Tank)
High efficiency toilet
Elongated bowl with concealed
skirted trapway
Vitreous china
16⅞" Plus Height bowl
Soft white tank lever
12" Rough-in
2" Fully glazed ball pass trapway
3" Flapper
Siphon jet flush action
Water Surface 9½" x 6⅝"
Decorative chrome and soft white
side caps included
Smooth close toilet seat included
15½"(W) x 28½"(D) x 29⅞"(H)
IAPMO cUPC
US EPA WaterSense
ASME A112.19.2 / CSA B45.1-2008
ADA Guidelines & ANSI A117.1
MaP tested 800g (Lined tank)
MaP tested 1000g (Unlined tank)
LEED Compliant
Included
Notes:
Product Specs:
· High efficiency toilet
· 4.8Lpf/1.28Gpf
· Elongated bowl with concealed skirted trapway
· Vitreous china
· 16⅞" Plus Height bowl
· Soft white tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Water surface (240mm x 170mm) 9½" x 6⅝"
· Decorative chrome and soft white side caps included
· Smooth close toilet seat included
Overall Dimensions:
392mm (W) x 725mm (D) x 760mm (H)
15½" (W) x 28½" (D) x 29⅞" (H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A 12.19.2 / CSA B45.1-2008
· ADA Guidelines & ANSI A117.1
· MaP Tested 800g (Lined tank)
· MaP Tested 1000g (Unlined tank)
Shipping:
Cube
9.39
GW
92.50lbs
4710BOV Lined Tank
Colours To Be Specified:Colour: Soft White
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to complywith the local disability codes and standards prior to installing the product.
CALI4.8Lpf / 1.28Gpf 1PC 167/8" HIGH ELONGATED
4710BOVU Unlined Tank
392mm(15½")
368mm(14⅜")
760mm(29⅞")
200mm(7⅞")
550mm(21⅝")
465mm(18¼")
305mm(12")
430mm(16⅞")
275mm(10⅞")
C/L of Seatpost holes
140mm(5½")
470mm(18½")
10mm(⅜")
Finished Wall
Finished Floor
725mm(28½")
Colours To Be Specified:Colour: Soft White
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
(Unllined Tank)
·
· LEED Compliant
www.contrac.caPage 57
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
CERTIFICATIONS
FEATURES
COLOUR TOILET SEAT
Included
Soft white
High efficiency toilet
Elongated bowl with concealed
skirted trapway
Vitreous china
16½" Plus Height bowl
Soft white tank lever
12" Rough-in
2" Fully glazed ball pass trapway
3" Flapper
Siphon jet flush action
Water Surface 9½" x 6⅝"
Decorative chrome and soft white
side caps included
Smooth close toilet seat included
15"(W) x 28½"(D) x 31"(H)
IAPMO cUPC
US EPA WaterSense
ASME A112.19.2 / CSA B45.1-2008
ADA Guidelines & ANSI A117.1
MaP tested 1000g
LEED Compliant
Cayla 4.8Lpf2pc toilet
BOWL4782BOV
LINED TANK4781BOV
UNLINED TANK4781BOVU
Product Specs:
· High efficiency toilet
· 4.8Lpf / 1.28Gpf
· Elongated bowl with concealed skirted trapway
· Vitreous china
· 16½" Plus Height bowl
· Soft white tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· 3" Flapper
· Siphon jet flush action
· Water surface (240mm x 170mm) 9½" x 6 "
· Decorative chrome and soft white side caps included
· Smooth close toilet seat included
Overall Dimensions: 382mm(W) x 722mm(D) x 788mm(H)
15"(W) x 28½"(D) x 31"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC · US EPA WaterSense
· ASME A112.19.2 / CSA B45.1-2008 · ADA Guidelines & ANSI A117.1
· MaP Tested 1000g
· LEED Compliant
Shipping:
Tank 1.32 cube 30.4 lbs (GW)
Bowl 5.72 cube 88 lbs (GW)
4782BOV Bowl4781BOV Lined Tank4781BOVU Unlined Tank
CAYLA4.8Lpf / 1.28Gpf 2PC 16½" HIGH ELONGATED
382mm(15")
348mm(13¾")
363mm(14¼")
338mm(13 ")
788mm(31")
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
FinishedWall
420mm(16½")
722mm(28½")
Post Holes140mm(5½")
C/L of Seat
470mm(18½")
190mm(7½")
547mm(21½")
Finished Floor305mm(12")
C/L of Outlet
Colour: Soft White
Bone (055)*
Biscuit (066)*
Notes:The drawing below shows a rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to complywith the local disability codes and standards prior to installing the product.
*Bone and Biscuit available through Direct import (CIF) only.
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.ca Issued: October 2015Page 59
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
COLOURSoft white Smooth close plastic toilet seat
Fits all standard round front toilet bowls
Individually boxed
5 Pieces in master carton
14⅜"(W) x 16⅞"(D) x 1"(H)
FEATURES
TOILET SEATTS6120SCSmooth Close Round Front
Product Specs:
· Smooth close plastic toilet seat
· Fits all standard round front toilet bowls
· Individually boxed
· 5 Pieces in master carton
Overall Dimensions:
365mm(W) x 429mm(D) x 25mm(H)
14⅜"(W) x 16⅞"(D) x 1"(H)
Shipping:
Cube 0.38
4.5 (Master carton)
GW 3.7 lbs
60 lbs (Master carton)
TS6120SC Round Front
SMOOTH CLOSE ROUND FRONTTOILET SEAT
Notes: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
10¼"
8¼"
14⅜"
16⅞"
5½"
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.ca Issued: October 2015Page 61
The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
COLOURSoft white Smooth close plastic toilet seat
Fits all standard elongated toilet bowls
Individually boxed
5 Pieces in master carton
14½"(W) x 18⅞"(D) x 1"(H)
FEATURES
TOILET SEATTS7150SCSmooth Close Elongated
Product Specs:
· Smooth close plastic toilet seat
· Fits all standard elongated front toilet bowls
· Individually boxed
· 5 Pieces in master carton
Overall Dimensions:
368mm(W) x 480mm(D) x 25mm(H)
14½"(W) x 18⅞"(D) x 1"(H)
Shipping:
Cube 0.47
5.48 (Master carton)
GW 4.2 lbs
45 lbs (Master carton)
TS7150SC Elongated Front
SMOOTH CLOSE ELONGATED FRONTTOILET SEAT
Notes: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
12⅜"
8⅝"
14½"
18⅞"
5½"
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 63
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
COLOURSoft white Regular hinge plastic toilet seat
Fits all standard round front toilet bowls
Individually boxed
10 Pieces in master carton
14½"(W) x 18⅞"(D) x 1⅛"(H)
FEATURES
TOILET SEATTS0060Round Front
*Direct import (CIF) only - Please contact your sales representative for further information
Product Specs:
· Regular hinge plastic toilet seat
· Fits all standard round front toilet bowls
· Individual polybag
· 10 Pieces in master carton
Overall Dimensions:
368mm(W) x 480mm(D) x 28mm(H)
14½"(W) x 18⅞"(D) x 1⅛"(H)
Shipping:
Cube 0.22
2.83 (Master carton)
GW 2.48 lbs
28 lbs (Master carton)
TS0060 Round Front
ROUND FRONTTOILET SEAT
10"
8¼"
14½"
18⅞"
5½"
Colour To Be Specified:Colour: Soft White
1¾"
*Direct import (CIF) only - Please contact your sales representative for further information
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 65
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
COLOURS
Regular hinge plastic toilet seat
Fits all standard elongated toilet bowls
Individually boxed
10 Pieces in master carton
14"(W) x 18⅜" - 18½(D) x 1⅝"(H)
FEATURES
TOILET SEATTS1209Elongated
COLOURSoft white
*Direct import (CIF) only - Please contact your sales representative for further information
Product Specs:
· Regular hinge plastic toilet seat
· Fits all standard elongated front toilet bowls
· Individual polybag
· 10 Piece in master carton
Overall Dimensions:
355mm(W) x 466mm - 471mm(D) x 41mm(H)
14"(W) x 18⅜" - 18½”(D) x 1⅝"(H)
Shipping:
Cube 0.24
2.89 (Master carton)
GW 2.64 lbs
30 lbs (Master carton)
TS1209 Elongated Front
ELONGATED FRONTTOILET SEAT
Notes: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
12"
8⅞"
14"
5½"
18⅜" min18½" max
Colour To Be Specified:Colour: Soft White*Direct import (CIF) only - Please contact your
sales representative for further information
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 67
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Cale
IAPMO cUPC
ASME A112.19.2 / CSA B45.1-2008
CERTIFICATIONS
FEATURES
COLOURSoft white
Vitreous china
15½" Bowl height
4 Holes (3 faucet holes with 8" center
and 1 small hole for pop-up rod)
Fits deck mounted fitting
Flushing rim
Vertical cleansing spray
Integral overflow
Faucet not included
14¾"(W) x 25⅜"(D) x 15½"(H)
4 Hole Bidet4830BLX
Notes:▲ Dimensions shown for location of supplies are suggested. "P"trap and fittings not furnished with bidet and must be ordered separately. Provisions must be made for the installation of trap in floor.
• Refer to installation instructions supplied with Bidet and fitting for additional information.
*Bone and Biscuit available through Direct import (CIF) only.
4830BLX 4-Hole Bidet
CALE4-HOLE BIDET
Finished Floor
Finished Wall
Wall Supply Floor Supply Lag Bolts
Ø24mm(1")
204mm(8")
Ø35mm(1⅜")
Ø44mm(1¾")
Ø24mm(1")
282mm(11½")102mm
(4")
280mm(11")
335mm(13⅛")
395mm(15½")
645mm(25⅜")65mm(2½") 374mm
(14¾")
Ø64mm(2½")
125mm(5")
●
235mm(9¼")Finished Floor
Product Specs:
· Vitreous china
· 15½" Bowl height
· 4 Holes (3 faucet holes with 8" center and
1 small hole for pop-up rod)
· Fits deck mounted fitting
· Flushing rim
· Vertical cleansing spray
· Integral overflow
· Faucet not included
Overall Dimensions:
374mm(W) x 645mm(D) x 395mm(H)
14¾"(W) x 25⅜"(D) x 15½"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1 - 2008
Shipping:Cube 4.00
GW 44 lbs
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 69
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Cambrie
IAPMO cUPC
ASME A112.19.2 / CSA B45.1-2008
CERTIFICATIONS
FEATURES
COLOURSoft white
Vitreous china
15⅜" Bowl height
Single hole faucet drilling
To be installed with horizontal
spray bidet faucet
Integral overflow
Faucet not included
14⅛"(W) x 21⅞"(D) x 16"(H)
Single Hole Bidet5810BLX
Notes:▲ Dimensions shown for location of supplies are suggested. "P" trap and fittings not furnished with bidet and must be ordered separately. Provisions must be made for the installation of trap in floor.
*Bone and Biscuit available through Direct import (CIF) only.
5810BLX Single Hole Bidet
CAMBRIESINGLE HOLE BIDET
Finished FloorFinished Wall
Wall Supply
Floor Supply Lag Bolts
125mm(5")
Finished Floor
Product Specs:
· Vitreous china
· 15⅜" Bowl height
· Single hole faucet drilling
· Horizontal cleansing spray
· Integral overflow
Overall Dimensions:
358mm(W) x 555mm(D) x 405mm(H)
14⅛"(W) x 21⅞"(D) x 16"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1 - 2008
Shipping:Cube 3.51
GW 44 lbs
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
165mm(6½")
245mm(9⅝")
398mm(15⅝")
555mm(21⅞")
215mm(8½")
405mm(16")
140mm(5½")
65mm(2½")
358mm(14⅛")
Ø35mm(1⅜")
Ø44mm(1¾")
Ø64mm(2½")
Ø10mm (⅜")
365mm (14⅜")
250mm(9⅞")
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 71
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
COLOURSoft white Vitreous china
Front overflow hole
Single hole, 4" or 8" faucet center
Template supplied
Faucet not included
20"(W) x 16⅞"(D) x 7⅝"(H)
IAPMO cUPC
ASME A112.19.2 / CSA B45.1-2008
ADA Guidelines & ANSI A117.1
CERTIFICATIONSFEATURES
Catalina®Oval
Drop-In SinkSINGLE HOLE 4110BGW
4" CENTER4140BGW
8" CENTER4180BGW
Product Specs:
· Vitreous china
· Front overflow hole
· Single hole, 4" or 8" faucet center
· Template supplied
· Faucet not included
Overall Dimensions:
510mm(W) x 430mm(D) x 194mm(H)
20"(W) x 16⅞"(D) x 7⅝"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
· ADA Section 4.19
Shipping:
Cube 1.84
GW 17 lbs
4110BGW Single Hole4140BGW 4" Center4180BGW 8" Center
CATALINA®OVAL DROP-IN SINK
204mm (8")
Single Hole, 102mm(4") or 204mm(8")
62mm(2½")
3 Holes32mm(1¼")
180mm(7⅛")
OverflowHole
44mm
(1¾")64mm
(2½") Counter top cut out478mm x 394mm
(18⅞" x 15½")
510mm(20")
260mm(10¼")
318mm(12½")
Counter Top
Supplies As Required
1¼" O.D.Waste
430mm(16⅞")
195mm(7⅝")
155mm(6⅛")
Note:Dimensions shown for locationof supplied and waste are suggested.
Notes: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
This product is designed to comply with ADA requirements, if installed according to the standard. It is the responsibilityof the installer to comply with this standard prior to installation
*Bone and Biscuit available through Direct import (CIF) only.
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Revised: June 2015 5970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 73
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Vitreous china
Front overflow hole
Single hole, 4" or 8" faucet center
Template supplied
Faucet not included
19"(W) x 19"(D) x 8⅛"(H)
FEATURES
Cailyn Round Drop-In Sink
SINGLE HOLE 4110BRW
4" CENTER4140BRW
8" CENTER4180BRW
COLOURSoft white IAPMO cUPC
ASME A112.19.2 / CSA B45.1-2008
ADA Guidelines & ANSI A117.1
CERTIFICATIONS
204mm (8")
Product Specs:
Overall Dimensions:
484mm(W) x 484mm(D) x 206mm(H)
19"(W) x 19"(D) x 8 "(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
· ADA Section 4.19
Shipping:
Cube 1.27
GW 20 lbs
4110BRW Single Hole4140BRW 4" Center4180BRW 8" Center
3 Holes32mm(1¼")
181mm
OverflowHole
43mm
(1¾")64mm
(2½")
484mm(19")
260mm(10¼")
318mm(12½")
Counter Top
Supplies As Required
1¼" O.D.Waste
484mm(19")
206mm(8 ")
CAILYNROUND DROP-IN SINK
Note:Dimensions shown for locationof supplied and waste are suggested.
Notes:Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
This product is designed to comply with ADA requirements, if installed according to the standard. It is the responsibilityof the installer to comply with this standard prior to installation.
*Bone and Biscuit available through Direct import (CIF) only.
Single Hole, 102mm(4") or 204mm(8")
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
(7 ")
Revised: June 2015 5970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 75
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Vitreous china
Front overflow hole
4" faucet center
Template supplied
Faucet not included
21"(W) x 17¾"(D) x 8"(H)
FEATURES
Curtis Semi-Oval Drop-In Sink
4" CENTER4140BEW
COLOURSoft white IAPMO cUPC
ASME A112.19.2 / CSA B45.1-2008
ADA Guidelines & ANSI A117.1
CERTIFICATIONS
Product Specs:
· Vitreous china
· Front overflow hole
· 4" Faucet center
· Template supplied
· Faucet not included
Overall Dimensions:
535mm(W) x 435mm(D) x 205mm(H)
21"(W) x 17¾"(D) x 8"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
· ADA Section 4.19
Shipping:
Cube 1.73
GW 17 lbs
Notes:Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
This product is designed to comply with ADA requirements, if installed according to the standard. It is the responsibilityof the installer to comply with this standard prior to installation.
*Bone and Biscuit available through Direct import (CIF) only.
4140BEW 4" Center
CURTISSEMI-OVAL DROP-IN SINK
Counter top
102mm(4")
51mm(2")
3 Holes32mm(1¼")
215mm(8½")
45mm(1¾")
65mm(2½")
Overflow HoleNote:Dimensions shown for location of suppliesand waste are suggested.
Counter Top Cut Out495mm x 400mm
(19½" x 15¾")
535mm(21")
260mm(10¼")
318mm(12½") 204mm(8")
Supplies AsRequired
1¼" O.D.Waste
435mm(17¾")
205mm(8")
150mm
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Revised: June 2015 5970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 77
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Vitreous china
Front overflow hole
Template and mounting hardware
supplied
Overall dimensions (W x D x H):
(OD): 17" x 14" x 7½"
(ID): 15" x 12" x 5½"
IAPMO cUPC
ASME A112.19.2 / CSA B45.1-2008
CERTIFICATIONSFEATURES
Connor 17" Oval Undermount Sink4210CFY
COLOURSoft white
430mm(17")
45° 273mm (10¾")
380mm(15")
355mm(14")
305mm(12")
95mm(3¾")
70mm(2¾")
64mm(2½")
44mm(1¾")
Overflow Hole
CountertopCut Out
(Template Supplied)Mounting Clips
(4 Pieces)
190mm(7½")
140mm(5½")
355mm(14")13mm(½")
327mm (12⅞")
204mm(8")
Counter Top
Supplies As Required1¼" O.D.
Waste
430mm(17")
Detail of Mounting Clip
Sink
Brass insert
ClipScrew
Countertop Note:Dimensions shown forlocation of suppliesand ″P″ trap aresuggested.
Product Specs:
· Vitreous china
· Front overflow hole
· Template and mounting hardware supplied
Overall Dimensions (W x D x H):
(OD): 430mm(17") x 355mm(14") x 190mm(7½")
(ID): 380mm(15") x 305mm(12") x 140mm(5½")
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
Shipping:
Cube 1.11
GW 16 lbs
Notes: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
4210CFY Undermount Sink
CONNOR17" OVAL UNDERMOUNT SINK
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 79
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Vitreous china
Front overflow hole
Template and mounting hardware
supplied
Overall dimensions (W x D x H):
(OD): 19¼" x 16⅛" x 7⅝"
(ID): 17" x 13¾" x 5¾"
IAPMO cUPC
ASME A112.19.2 / CSA B45.1-2008
CERTIFICATIONSFEATURES
Calvin 19¼" Oval Undermount Sink4220CFY
COLOURSoft white
Notes: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
4220CFY Undermount Sink
CALVIN19¼" OVAL UNDERMOUNT SINK
Product Specs:
· Vitreous china
· Front overflow hole
· Template and mounting hardware supplied
Overall Dimensions (W x D x H):
(OD): 490mm(19¼") x 410mm(16⅛") x 195mm(7⅝")
(ID): 430mm(17") x 350mm(13¾") x 145mm(5¾")
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
Shipping:
Cube 1.53
GW 19 lbs
490mm (19¼")
45° 273mm (10¾")
430mm(17")
410mm(16⅛")
350mm(13¾")
100mm(4")
70mm(2¾")
64mm(2½")
44mm(1¾")
Overflow Hole
CountertopCut Out
(Template Supplied)Mounting Clips
(4 Pieces)
195mm(7⅝")
145mm(5¾")
410mm(16⅛")15mm(⅝")
327mm (12⅞")
204mm(8")
Counter Top
Supplies As Required
32mm(1¼") O.D.Waste
Detail of Mounting Clip
Sink
Brass insert
ClipScrew
Countertop Note:Dimensions shown forlocation of suppliesand ″P″ trap aresuggested.
490mm(19¼")
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Revised: 5970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
June 2015
www.contrac.caPage 81
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Vitreous china
Front overflow hole
Template and mounting hardware
supplied
Overall dimensions (W x D x H):
(OD) 16" x 16" x 7½"
(ID) 13⅝" x 13⅝" x 5½"
IAPMO cUPC
ASME A112.19.2 / CSA B45.1-2008
CERTIFICATIONSFEATURES
4210CHYCamden 16" Square Undermount Sink
COLOURSoft white
Notes: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· Vitreous china
· Front overflow hole
· Template and mounting hardware supplied
Overall Dimensions (W x D x H):
(OD): 406mm(16") x 406mm(16") x 190mm(7½")
(ID): 345mm(13⅝") x 345mm(13⅝") x 140mm(5½")
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
Shipping:
Cube 1.43
GW 24 lbs
4210CHY Undermount Sink
CAMDEN16" SQUARE UNDERMOUNT SINK
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
1¼" O.D.Waste
Supplies As Required
Detail of Mounting Clip
Sink
Brass insert
ClipScrew
Countertop Note:Dimensions shown forlocation of suppliesand ″P″ trap aresuggested.
406mm(16")
345mm(13⅝")
406mm(16")
345mm(13⅝") 30mm(1¼")
110mm(4⅜")
65mm(2½")44mm(1¾")
100mm(4")
Counter TopCut Out
(Template Supplied)
Mounting Clips(4 Pieces)
Overflow Hole 12mm x 50mm (½" x 2") 327mm
(12⅞")273mm(10¾")
204mm(8")
406mm(16")
Counter Top
406mm(16")
190mm(7½")
140mm(5½")
12mm(½")
Revised: June 2015 5970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 83
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
IAPMO cUPC
ASME A112.19.2 / CSA B45.1-2008
CERTIFICATIONS
Catena 20" Rectangular Undermount Sink4210CIY
FEATURES
Vitreous china
Front overflow hole
Template and mounting hardware
supplied
Overall dimensions (W x D x H):
(OD): 20" x 15½" x 7½"
(ID): 17¾" x 13⅛" x 5½"
COLOURSoft white
Notes: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
510mm(20")
450mm(17¾")
395mm(15½")
335mm(13⅛")
65mm(2½") 44mm(1¾")
Overflow Hole 12mm x 50mm (½" x 2")
CountertopCut Out (Template Supplied)
Mounting Clips(4 Pieces)
130mm(5⅛")
30mm(1⅛")
110mm(4¼") 510mm(20")
327mm(12⅞")
273mm(10¾")
204mm(8")
Supplies As Required1¼" O.D Waste
Counter Top
190mm(7½")
140mm(5½")
12mm(½")
395mm(15½")
Detail of Mounting Clip
Sink
Brass insert
ClipScrew
Countertop Note:Dimensions shown forlocation of suppliesand ″P″ trap aresuggested.
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
Product Specs:
· Vitreous china
· Front overflow hole
· Template and mounting hardware supplied
Overall Dimensions (W x D x H):
(OD): 510mm(20") x 395mm(15½") x 190mm(7½")
(ID): 450mm(17¾") x 335mm(13⅛") x 140mm(5½")
Compliance Certifications:
Meets or exceeds the following :
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
Shipping:
Cube 1.72
GW 27 lbs
CATENA20" RECTANGULAR UNDERMOUNT SINK
4210CIY Undermount Sink
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 85
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Vitreous china
Front overflow hole
Template and mounting hardware
supplied
Overall dimensions (W x D x H):
(OD): 21½" x 14" x 7½"
(ID): 19" x 11⅝" x 5½"
IAPMO cUPC
ASME A112.19.2 / CSA B45.1-2008
CERTIFICATIONS
Collette 21½" Rectangular Undermount Sink4220CIY
FEATURES COLOURSoft white
Notes: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
4220CIY Undermount Sink
COLLETTE21½" RECTANGULAR UNDERMOUNT SINK
Product Specs:
· Vitreous china
· Front overflow hole
· Template and mounting hardware supplied
Overall Dimensions (W x D x H):
(OD): 545mm(21½") x 355mm(14") x 190mm(7½")
(ID): 485mm(19") x 295mm(11⅝") x 140mm(5½")
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
Shipping:
Cube 1.64
GW 25 lbs
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
545mm(21½")
485mm(19")
355mm(14")
295mm(11⅝")
65mm(2½") 44mm(1¾")
Overflow Hole 12mm x 50mm (½" x 2")
CountertopCut Out (Template Supplied)
Mounting Clips(4 Pieces)
130mm(5⅛")
30mm(1⅛")
110mm(4¼") 545mm(21½")
327mm(12⅞")
273mm(10¾")
204mm(8")
Supplies As Required1¼" O.D Waste
Counter Top
190mm(7½")
140mm(5½")
12mm(½")
355mm(14")
Detail of Mounting Clip
Sink
Brass insert
ClipScrew
Countertop Note:Dimensions shown forlocation of suppliesand ″P″ trap aresuggested.
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 87
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Vitreous china
Rear overflow hole
Single hole, 4" or 8" faucet center
Supplied with mounting hardware
Faucet not included
22¾"(W) x 19"(D) x 34"(H)
IAPMO cUPC
ASME A112.19.2 / CSA B45.1-2008
CERTIFICATIONS
FEATURES
COLOURSoft white
BASIN WITH SINGLE HOLE4313DMX
BASIN WITH 4" CENTER4343DMX
BASIN WITH 8" CENTER4383DMX
PEDESTAL LEG
4344DMXCaprice Pedestal Lavatory
Notes: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASMEstandard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Product Specs:
· Vitreous china
· Rear overflow hole
· Single hole, 4" or 8" faucet center
· Supplied with mounting hardware
· Faucet not included
Overall Dimensions:
580mm(W) x 482mm(D) x 865mm(H)
22¾"(W) x 19"(D) x 34"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
Shipping:
Basin 2.36 cube
43 lbs (GW)
Leg 0.8 cube
24 lbs (GW)
CAPRICEPEDESTAL LAVATORY
527mm(20¾")
32mm(1¼") Dia.3 Holes
220mm(8⅝")
80mm(3⅛")
Overflow Hole
580mm(22¾")
44mm(1¾")64mm
(2½")
482mm(19")
Pedestal AnchorScrew Holes2mm x 10mm (⅛" x ⅜") Dia.
Finished Wall
Note: Dimensions shown for location of supplies and waste are suggested.*Actual dimensions must be taken from fixture.
*67mm(2⅝")
220mm(8⅝")
110mm(4⅜")
Supplies As Required
190mm(7½")
1¼" O.D. Waste
204mm(8")
225mm(8⅞")
12mm x 20mm(½" x ⅞")
Holes For Anchor
865mm(34")
579mm(22¾")
535mm(21")
Finished Floor190mm(7½")
95mm(3¾")
Back View
Single Hole,102mm(4") or 204mm(8")
Faucet Center
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
4313DMX Basin with Single Hole4343DMX Basin with 4" Center4383DMX Basin with 8" Center4344DMX Pedestal Leg
Revised: June 2015 5970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
*Bone and Biscuit available through Direct import (CIF) only.
www.contrac.caPage 89
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
CERTIFICATIONS
FEATURES
Vitreous china
Rear overflow hole
Single hole, 4" or 8" faucet center
Supplied with mounting hardware
Faucet not included
23½"(W) x 19¼"(D) x 33⅝"(H)
IAPMO cUPC
ASME A112.19.2 / CSA B45.1-2008
BASIN WITH 4" CENTER5343DMX
BASIN WITH 8" CENTER5383DMX
PEDESTAL LEG
5344DMXCarley®Pedestal Lavatory
COLOURSoft white
BASIN WITH SINGLE HOLE5313DMX
Notes: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
*Bone and Biscuit available through Direct import (CIF) only.
Product Specs:
· Vitreous china
· Rear overflow hole
· Single hole, 4" or 8" faucet center
· Supplied with mounting hardware
· Faucet not included
Overall Dimensions:
596mm(W) x 489mm(D) x 855mm(H)
23½"(W) x 19¼"(D) x 33⅝"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
Shipping:
Basin 2.64 cube
30 lbs (GW)
Leg 0.89 cube
18 lbs (GW)
5343DMX Basin with 4" Center5383DMX Basin with 8" Center5344DMX Pedestal Leg
CARLEY®PEDESTAL LAVATORY
465mm(18⅜")
410mm(16")
102mm(4") or 204mm(8")Faucet Center
205mm(8")
Finished Wall
35mm(1¼")
64mm(2½") 44mm(1¾") 489mm(19¼")
Note: Dimensions shown for locationof supplies and waste are suggested.
596mm(23½")
215mm(8½")
691mm(27¼")
Supplies As Required
855mm(33⅝")
FinishedFloor
190mm(7½")
569mm(22⅜")
525mm(20⅝")
32mm(1¼")O.D. Waste
204mm(8")
115mm(4½")
Back View
Colours To Be Specified:Colour: Soft White
Bone (055)*
Biscuit (066)*
58mm(2¼")
170mm(6¾")
Revised: August 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
Single Hole,
5313DMX Basin with Single Hole
www.contrac.caPage 91
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Vitreous china
Rear overflow hole
4" faucet center
Supplied with mounting hardware
Faucet not included
20⅞"(W) x 17⅛"(D) x 31½"(H)
IAPMO cUPC
ASME A112.19.2 / CSA B45.1-2008
CERTIFICATIONS
FEATURES
BASIN WITH 4" CENTER5343AMX
PEDESTAL LEG
5344AMXCalena
COLOURSoft white
Pedestal Lavatory
Notes:
Product Specs:
· Vitreous china
· Rear overflow hole
· 4" faucet center
· Supplied with mounting hardware
· Faucet not included
Overall Dimensions:
530mm (W) x 435mm (D) x 800mm (H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A A
Shipping:
Basin
Leg
5343AMX Basin with 4" Center5344AMX Pedestal Leg
CALENAPEDESTAL LAVATORY
Note:Dimensions shown for location
435mm
ØØ
(
(4")Faucet Center
530mm( ")
55mm(2 ")
800mm")
")
")
Opening at rear
Colours To Be Specified:Colour: Soft White
*Bone and Biscuit available through Direct import (CIF) only.
Finished Wall
FinishedFloor
Back View
"
Supplies As Required
32mm
Waste
204mm(8")
")
438mm")
")
Mounting HolesØ ")
Colours To Be Specified:Colour: Soft White
Bone (055)*
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 93
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
CERTIFICATIONS
FEATURES
Kolby 0.47LpfWall Mount Urnial
TOP INLET 4810BSX
REAR INLET4810BSY
Ultra High efficiency urinal
Vitreous china
Washout flush action
¾" Top or back inlet spud
Outlet connection threaded
2" inside NPTF
Flushing rim
Extended sides for privacy
Integral trap
12⅜'' rim from finished wall
Wall hangers and screws included
Flushometer not included
13⅞"(W) x 12⅜"(D) x 21⅝"(H)
IAPMO cUPC
ASME A112.19.2 / CSA B45.1-2008
ADA Guidelines & ANSI A117.1
LEED Compliant
COLOURSoft white
*
*Please note: In order to comply with WaterSense certification this urinal must be used with 0.47Lpf WaterSense labeled flushometer.
Notes:Flush Valve is not included and must be ordered separately. Provide suitable reinforcement for all wall supports.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASMEstandard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Complies with ADA Section 4.18 when installed per code.
Product Specs:
· Ultra High efficiency urinal
· 0.47Lpf / 0.125Gpf
· Vitreous china
· Washout flush action
· ¾" Top or back inlet spud
· Outlet connection threaded 2" inside NPTF
· Flushing rim
· Extended sides for privacy
· Integral trap
· 123/8” rim from finished wall
· Wall hangers and screws included
Overall Dimensions:
352mm(W) x 314mm(D) x 550mm(H)
137/8"(W) x 123/8"(D) x 215/8"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
Please note: In order to comply with WaterSense certification this urinal must be used with 0.47Lpf / 0.125Gpf WaterSense labeled flushometer.
· ASME A112.19.2 / CSA B45.1-2013
· LEED Compliant
Shipping:
Cube 2.85
GW 35 lbs
4810BSX Top Inlet Wall Mount Urinal
4810BSY Rear Inlet Wall Mount Urinal
KOLBY0.47Lpf WALL MOUNT URINAL
Finished Floor
Colours To Be Specified:Colour: Soft White
810m
m(3
1⅞”)
· Flushometer not included
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 95
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
CERTIFICATIONS
FEATURES
Cornell 1.9LpfWall Mount Urinal
TOP INLET 4810BEX
REAR INLET4810BEY
COLOURSoft white
IAPMO cUPC
US EPA WaterSense
ASME A112.19.2 / CSA B45.1-2008
LEED Compliant
High efficiency urinal
Vitreous china
Washout flush action
¾" Top or back inlet spud
Outlet spud with 1½" tubing tailpiece
Flushing rim
Mounting hardware supplied
For concealed carrier installation
(fits Zurn Z1221-130123 carriers)
Integral strainer
Flushometer not included
12⅝"(W) x 12¾"(D) x 18"(H)
Colours To Be Specified:Colour: Soft White
Notes:Flush Valve is not included and must be ordered separately. Provide suitable reinforcement for all wall supports.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASMEstandard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Complies with ADA Section 4.18 when installed per code.
4810BEX Top Inlet Wall Mount Urinal
4810BEY Rear Inlet Wall Mount Urinal
Product Specs:
· High efficiency urinal
· 1.9Lpf / 0.5Gpf
· Vitreous china
· Washout flush action
· ¾" Top or back inlet spud
· Outlet spud with 1½" tubing tailpiece
· Flushing rim
· Mounting hardware supplied
· For concealed carrier installation (fits
Zurn Z1221-130123 carriers)
· Integral strainer
· Flushometer not included
Overall Dimensions:
321mm(W) x 324mm(D) x 457mm(H)
12 "(W) x 12¾"(D) x 18"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
Please note: In order to comply with WaterSense certification this urinal must be used with 1.9Lpf / 0.5Gpf WaterSense labeled flushometer.
· ASME A112.19.2 / CSA B45.1-2008
· LEED Compliant
Shipping:
Cube 2.35
GW 36 lbs
CORNELL1.9Lpf / 0.5 Gpf WALL MOUNT URINAL
292mm(11½")
305mm(12")
457mm(18")
292mm(11½")
Finished Floor32mm(1¼")
321mm(12 ")170mm(6 ")
1½" O.D. Waste
1½" O.D. Tailpiece
103mm(4")
121mm(4¾")
¾" SpudHangers
61mm(2½")
Finished Wall
66mm(2½")
115mm(4½")
324mm(12¾")
432mm(17") Max.
610mm(24")Optional To Finished Floor
180mm(7")
¾" S.P.S or ¾" C.W.TSupply To Flush Valve
19mm (¾")Top Spud
orBack Spud
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 97
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
CERTIFICATIONS
FEATURES
Carlo 1.9LpfWall Mount Urinal
COLOURSoft white
TOP INLET 4810BHX
REAR INLET4810BHY
IAPMO cUPC
US EPA WaterSense
ASME A112.19.2 / CSA B45.1-2008
LEED Compliant
High efficiency urinal
Vitreous china
Washout flush action
¾" Top or back inlet spud
Outlet connection threaded
2" inside NPTF
Flushing rim
Mounting hardware supplied
For concealed carrier installation
(fits Zurn Z1221-130125 carriers)
Extended sides for privacy
Integral trap
Flushometer not included
18¼"(W) x 13¾"(D) x 27"(H)
Notes:Flush Valve is not included and must be ordered separately. Provide suitable reinforcement for all wall supports.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASMEstandard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Complies with ADA Section 4.18 when installed per code.
Product Specs:
· High efficiency urinal
· 1.9Lpf / 0.5Gpf
· Vitreous china
· Washout flush action
· ¾" Top or back inlet spud
· Outlet connection threaded 2" inside NPTF
· Flushing rim
· Mounting hardware supplied
· For concealed carrier installation (fits
Zurn Z1221-130125 carriers)
· Extended sides for privacy
· Integral trap
· Flushometer not included
Overall Dimensions:
465mm(W) x 350mm(D) x 685mm(H)
18¼"(W) x 13¾"(D) x 27"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
Please note: In order to comply with WaterSense certification this urinal must be used with 1.9Lpf / 0.5Gpf WaterSense labeled flushometer.
· ASME A112.19.2 / CSA B45.1-2008
· LEED Compliant
Shipping:
Cube 4.94
GW 60 lbs
CARLO1.9Lpf / 0.5Gpf WALL MOUNT URINAL
4810BHX Top Inlet Wall Mount Urinal
4810BHY Rear Inlet Wall Mount Urinal
Colours To Be Specified:Colour: Soft White
685mm(27")
440mm(17 ")
Finished Floor
292mm(11½")
102mm(4")
121mm(4¾")
445mm(17½")
320mm(12½")
465mm(18¼")
C/L of Outlet
430mm(17")
110mm(4 ")
2 Hangers
¾" S.P.S or ¾"C.W.T Supply To Flush Valve
Finished Wall
69mm(2¾")
350mm(13¾")
242mm(9½")
13mm(½")
432mm(17") Max.
610mm(24")Optional
2" N.P.T FemaleOutlet Connection
19mm(¾")Spud
8mm x 25mm( " x ")
Slot
19mm (¾")Top Spud
orBack Spud
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 99
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
CERTIFICATIONS
FEATURES
Carlton 1.9LpfWall Mount Urinal
COLOURSoft white
TOP INLET4810BFX
IAPMO cUPC
US EPA WaterSense
ASME A112.19.2 / CSA B45.1-2008
LEED Compliant
High efficiency urinal
Vitreous china
Washout flush action
¾" Top inlet spud
Outlet connection threaded
2" inside NPTF
Flushing rim
Mounting hardware supplied
For concealed carrier installation
(fits Zurn Z1221-130119 carriers)
Extended sides for privacy
Integral trap
Flushometer not included
17½"(W) x 14¾"(D) x 27"(H)
Notes:Flush Valve is not included and must be ordered separately. Provide suitable reinforcement for all wall supports.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASMEstandard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Complies with ADA Section 4.18 when installed per code.
Product Specs:
· High efficiency urinal
· 1.9Lpf / 0.5Gpf
· Vitreous china
· Washout flush action
· ¾" Top inlet spud
· Outlet connection threaded 2" inside NPTF
· Flushing rim
· Extended sides for privacy
· Integral trap
· Elongated 14¾" rim from finished wall
· For concealed carrier installation (fits
Zurn Z1221-130119 carriers)
· Flushometer not included
Overall Dimensions:
445mm(W) x 375mm(D) x 684mm(H)
17½"(W) x 14¾"(D) x 27"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
Please note: In order to comply with WaterSense certification this urinal must be used with 1.9Lpf / 0.5Gpf WaterSense labeled flushometer.
· ASME A112.19.2 / CSA B45.1-2008
· LEED Compliant
Shipping:
Cube 5.27
GW 65 lbs
4810BFX Top Inlet Wall Mount Urinal
CARLTON1.9Lpf / 0.5Gpf WALL MOUNT URINAL
Finished Floor
684mm(27")
485mm(9¾")
292mm(11½")
121mm(4¾")
102mm(4")
19mm(¾")Spud
375mm(14¾")2 Hangers
418mm(16½")
200mm(7⅞")
¾" S.P.S. or ¾" C.W.T.Supply To Flush Valve
257mm(10⅛")
445mm(17½")
C/L of Outlet
Finished Wall
165mm(6½")60mm
(2½")
375mm(14¾")
13mm(½")
432mm(17") Max.610mm(24")
Optional2" N.P.T Female Outlet Connection
8mm x 25mm(⅜" x ⅞")
Slot
19mm (¾")Top Inlet Spud
Colours To Be Specified:Colour: Soft White
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 101
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
CERTIFICATIONS
FEATURES
Colter 4.8LpfElongated Flushometer Bowl
COLOURSoft white
TOP INLET 4762BEX
REAR INLET4762BEU
Not Included
TOILET SEAT
(Top Inlet)
High efficiency Flushometer bowl
Elongated bowl
Vitreous china
15⅛" Bowl height
10" Rough-in
2" Fully glazed ball pass trapway
1½" Top or back inlet spud
Siphon jet flush action
Water surface 10⅝" x 7¼"
Flushometer not included
15"(W) x 27¾"(D) x 15⅛"(H)
IAPMO cUPC
ASME A112.19.2 / CSA B45.1-2008
MaP tested 1000g (Top inlet)
MaP tested 600g (Rear inlet)
LEED Compliant
Product Specs:
· High efficiency flushometer bowl
· 4.8Lpf / 1.28Gpf · Will also function with 6Lpf / 1.6Gpf flushometer
· Elongated bowl
· Vitreous china
· 1 " Bowl height
· 10" (254mm) Rough-in
· 2" Fully glazed ball pass trapway
· Siphon jet flush action
· 1½" Top or back inlet spud
· Water surface (2 0mm 185mm) 10 " "
· Toilet seat and flushometer not included
Overall Dimensions:
382mm(W) x 705mm(D) x 385mm(H)
15"(W) x 27 "(D) x 15 "(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
· MaP tested 1000g (Top Inlet)
· MaP tested 600g (Rear Inlet)
Please note: MaP testing was completed with Sloan Flushometer Valve Model: Royal 111-1.2
· LEED Compliant
Shipping:
Cube 4.17
GW 56 lbs
Colours To Be Specified:Colour: Soft White
4762BEX Top Inlet Flushometer Bowl
4762BEU Rear Inlet Flushometer Bowl
Notes:This toilet is designed to rough-in at a minimum dimension of 254mm (10") from finished wall toC/L of outlet. Flush valve not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerancesestablished by ASME standard A112.19.2. These measurements are subject to change or cancellation.No responsibility is assumed for use of superseded or voided pages.
COLTER4.8Lpf / 1.28Gpf ELONGATED
FLUSHOMETER BOWL
Finished Floor
470mm(18½")Ø15mm( ")
38mm(1½") Spud
140mm(5½")
550mm(21 ")
254mm(10")
385mm(15 ")
705mm(27¾")382mm(15")
243mm(9½")
Finished Wall
C/L of Outlet
38mm(1½") Spud
38mm (1½")Top Spud
orBack Spud
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
(Top Inlet)
www.contrac.caPage 103
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
CERTIFICATIONS
FEATURES
Clay TOP INLET 4762BOX
REAR INLET4762BOU
(Top Inlet)
IAPMO cUPC
ASME A112.19.2 / CSA B45.1-2008
ADA Guidelines & ANSI A117.1
MaP tested 1000g (Top inlet)
MaP tested 500g (Rear inlet)
LEED Compliant
High efficiency flushometer bowl
Elongated bowl
Vitreous china
16⅝" Plus Height bowl
10" Rough-in
2" Fully glazed ball pass trapway
1½" Top or back inlet spud
Water surface 9⅞" x 6⅝"
Flushometer not included
15"(W) x 27¾"(D) x 16⅝"(H)
COLOURSoft white
Not Included
TOILET SEAT
4.8LpfElongated Flushometer Bowl
Product Specs:
· High efficiency flush valve bowl
· 4.8Lpf / 1.28Gpf
· Will also function with 6Lpf / 1.6Gpf flushometer
· Elongated bowl
· Vitreous china
" Plus Height Bowl
· 10" (254mm) Rough-in
· 2" Fully glazed ball pass trapway
· Siphon jet flush action
· 1½" Top or back inlet spud
· Toilet seat and flushometer not included
Overall Dimensions:
382mm(W) x 705mm(D) x 424mm(H)
15"(W) x 27¾"(D) x 16 "(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
· ADA Guidelines & ANSI A117.1
· MaP tested 1000g (Top Inlet)
· MaP tested 500g (Rear Inlet)
Please note: MaP testing was completed with Sloan Flushometer Valve Model: Royal 111-1.2
· LEED Compliant
Shipping:
Cube 4.55
GW 50 lbs
4762BOX Top Inlet Flushometer Bowl
4762BOU Rear Inlet Flushometer Bowl
Notes:This toilet is designed to rough-in at a minimum dimension of 254mm (10") from finished wall toC/L of outlet. Flush valve not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerancesestablished by ASME standard A112.19.2. These measurements are subject to change or cancellation.No responsibility is assumed for use of superseded or voided pages.
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer tocomply with the local disability codes and standards prior to installing the product.
470mm(18½")
Finished Floor
140mm(5½")
243mm(9½")
545mm(21½")
254mm(10")
705mm(27¾")
424mm(16 ")
382mm(15")
C/L of Outlet
CLAY4.8Lpf / 1.28Gpf ELONGATED FLUSHOMETER BOWL
38mm(1½") Spud
38mm(1½") Spud
Finished Wall
38mm (1½")Top Spud
orBack Spud
Colours To Be Specified:Colour: Soft White
(Top Inlet)
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 105
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
CERTIFICATIONS
FEATURES
Clark TOP INLET 4762CEX
REAR INLET4762CEU
(Top Inlet)
High efficiency flushometer bowl
Elongated bowl
Vitreous china
2" Fully glazed ball pass trapway
Siphon jet flush action
1½" Top or back inlet spud
Water surface 10¼" x 8⅝"
Flushometer not included
15⅜"(W) x 25½"(D) x 13⅛"(H)
IAPMO cUPC
ASME A112.19.2 / CSA B45.1-2008
ADA Guidelines & ANSI A117.1
MaP tested 1000g (Top inlet)
MaP tested 500g (Rear inlet)
LEED Compliant
COLOURSoft white
Not Included
TOILET SEAT
4.8LpfElongated Flushometer Bowl
Product Specs:
· High efficiency flushometer bowl
· 4.8Lpf / 1.28Gpf
· Will also function with 6Lpf / 1.6Gpf flushometer
· Elongated bowl
· Vitreous china
· 2" Fully glazed ball pass trapway
· Siphon jet flush action
· 1½" Top or back inlet spud
· Water surface (260mm x 260mm) 10¼" x 8⅝"
15⅜"(W) x 25½"(D) x 13⅛"(H)
· Toilet seat and flushometer not included
Overall Dimensions:
390mm(W) x 650mm(D) x 335mm(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
· ADA Guidelines & ANSI A117.1
· MaP tested 1000g (Top Inlet)
· MaP tested 500g (Rear Inlet)
Please note: MaP testing was completed with Sloan Flushometer Valve Model: Royal 111-1.2
· LEED Compliant
Shipping:
Cube 3.79
GW 50 lbs
4762CEX Top Inlet Wall Hung Flushometer Bowl4762CEU Rear Inlet Wall Hung Flushometer Bowl
Notes:• Toilet models designed to meet ADA Accessibility Standard when top of seat at 432mm to 482mm (17" to 19") from finished floor. Flush valve not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerancesestablished by ASME standard A112.19.2. These measurements are subject to change or cancellation.No responsibility is assumed for use of superseded or voided pages.
CLARK4.8Lpf / 1.28Gpf ELONGATED
WALL HUNG FLUSHOMETER BOWL
Colours To Be Specified:Colour: Soft White
468mm(18½")
Finished Floor
140mm(5½")
390650mm(25½")
335mm(13 ")
381mm(15")
432mm(17") Max.
ADA Height
38mm(1½") Spud
(4762CEX only)
38mm(1½") Spud
38mm (1½")Top Spud
orBack Spud
Finished Wall
230mm(9")
Ø38mm(1½")Spud
(4762CEU only)
Ø57mm(2¼")
190mm(7½")
Ø25mm(1")
254mm(10")
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
(Top Inlet)
www.contrac.caPage 107
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
IAPMO cUPC
US EPA WaterSense
ASME A112.19.2 / CSA B45.1-2008
ADA Guidelines & ANSI A117.1
MaP Premium tested 1000g
LEED Compliant
CERTIFICATIONS
FEATURES
Cleo 3.8Lpf 2pc Pressure Assist
BOWL5722BOY
UNLINED TANK5721BOY
High efficiency pressure assist toilet
Sloan FLUSHMATE® Flush
Elongated bowl
Vitreous china
17" Plus Height bowl
Chrome tank lever
12" Rough-in
2" Fully glazed ball pass trapway
Siphon jet flush action
Water Surface 8" x 6½"
17⅝"(W) x 28⅛"(D) x 31½"(H)
COLOUR TOILET SEAT
Included
Soft white
Product Specs:
· High efficiency pressure assist toilet
· 3.8Lpf / 1Gpf
· Powerful and Quiet pressure assisted
Sloan FLUSHMATE® Flush assures clean
and complete removal of all waste
· Elongated bowl
· Vitreous china
· 17" Plus Height bowl
· Chrome tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· Siphon jet flush action
· Water surface (203mm x 165mm) 8" x 6½"
· Toilet seat not included
Overall Dimensions:
447mm(W) x 716mm(D) x 799mm(H)
17⅝"(W) x 28⅛"(D) x 31½"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 / CSA B45.1 2008
· ADA Guidelines & ANSI A117.1
· Map tested 1000g · MaP Premium certified
· LEED Compliant Shipping:
Tank 1.43 cube
33 lbs (GW)
Bowl 4.59 cube
52 lbs (GW)
10mm(⅜")
305mm(12")
431mm(17")
C/L of Seatpost holes
140mm(5½")
447mm(17⅝")
799mm(31½")
470mm(18½")
357mm(14")
262mm(10⅜")
356mm(14")
716mm(28⅛")202mm(8")
547mm(21½")
5722BOY Bowl
Finished FloorC/L of Outlet
Finished Wall
CLEO 3.8Lpf / 1Gpf 2PC 17" HIGH
ELONGATED PRESSURE ASSIST
693mm(27¼")
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to complywith the local disability codes and standards prior to installing the product.
5721BOY Unlined Pressure Assist Tank
Colours To Be Specified:Colour: Soft White
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 109
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
IAPMO cUPC
US EPA WaterSense
ASME A112.19.2 / CSA B45.1-2008
ADA Guidelines & ANSI A117.1
MaP Premium tested 1000g
LEED Compliant
CERTIFICATIONS
FEATURES
Chane3.8Lpf
2pc Rear Outlet Pressure Assist
BOWL5722BMY
UNLINED TANK5721BOY
High efficiency pressure assist toilet
Sloan FLUSHMATE® Flush
Elongated siphon jet action bowl
Vitreous china
17" Plus Height bowl
Chrome tank lever
Back outlet flange
2" Fully glazed ball pass trapway
Water surface 11⅝" x 7⅞"
17½"(W) x 29¾"(D) x 31½"(H)
COLOUR TOILET SEAT
Included
Soft white
Notes:This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L ofoutlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibilityis assumed for use of superseded or voided pages.
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to complywith the local disability codes and standards prior to installing the product.
Product Specs:
· High efficiency pressure assist toilet
· 3.8Lpf / 1.0Gpf
· Powerful and Quiet pressure assisted
Sloan FLUSHMATE® Flush assures clean
and complete removal of all waste
· Elongated siphon jet action bowl
· Vitreous china
· 17" Plus Height bowl
· Chrome tank lever
· Back outlet flange
· 2" Fully glazed ball pass trapway
· Water surface (295mm x 198mm) 11⅝" x 7⅞"
· Toilet seat not included
Overall Dimensions:
447mm(W) x 755mm(D) x 800mm(H)
17½"(W) x 29¾"(D) x 31½"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· US EPA WaterSense
· ASME A112.19.2 / CSA B45.1-2008
· ADA Guidelines & ANSI A117.1
· MaP tested 1000g
· MaP Premium certified
· LEED Compliant
Shipping:
Tank 1.43 cube / 33 lbs (GW)
Bowl 5.13 cube / 60 lbs (GW)
Colours To Be Specified:Colour: Soft White
5722BMY Bowl
5721BOY Unlined Pressure Assist Tank
CHANE3.8Lpf / 1.0Gpf 2PC 17" HIGH ELONGATED
REAR OUTLET PRESSURE ASSIST
430mm(17")
Finished Floor
638mm(25⅛")
470mm(18½")
755mm(29¾")
755mm(29¾") 209mm(9⅞")
Finished Wall
C/L of Seat Post Holes140mm(5½")
447mm(17½")
357mm(14⅛")
375mm(14⅞")
232mm(9¼")
800mm(31½")
232mm(9¼")
375mm(14⅞")
150mm(5⅞")
108mm(4¼")
Ø82mm(3¼")
Ø65mm(2⅝")
22*12mm(⅞"*½")
Back View
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 111
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
CERTIFICATIONS
FEATURES
Caledon4.8Lpf
2pc KindergartenToilet
COLOURSoft white
Included
TOILET SEAT
IAPMO cUPC
ASME A112.19.2 / CSA B45.1-2008
ADA Guidelines & ANSI A117.1
MaP tested 800g
LEED Compliant
High efficiency toilet
Vitreous china
11" Bowl height
Soft white tank lever
Allen key locking mechanism
(applicable only on locking
tank option)
10" Rough-in
2" Fully glazed ball pass trapway
Siphon jet flush action
Plastic toilet seat included
Water surface 9¼" x 8¼"
17"(W) x 24¼"(D) x 26⅜"(H)
BOWL/LINED TANK4760BKV
BOWL/LINED LOCKING TANK4760BKV-L
CALEDON4.8LPF 2PC KINDERGARTEN
Colours To Be Specified:Colour: Soft White
254mm(10")
432mm(17")
380mm(15")
671mm(26⅜")
280mm(11")
617mm(24¼")
C/L of Seatpost holes
140mm (5½")
380mm(15")
343mm(13½")
217mm(8½") 440mm(17⅜")
10mm(⅜")
203mm(8")
575mm(22⅝")
Finished wall
C/L of OutletFinished floor
Product Specs:
· 4.8Lpf
· Vitreous china
· 11" Bowl height
· Soft white tank lever
· Allen key locking mechanism (applicable only on locking tank option)
· 10" (254mm) Rough-in
· 2" Fully glazed ball pass trapway
· Siphon jet flush action
· Water surface (235mm x 210mm) 9¼" x 8¼"
· Plastic toilet seat included
Overall Dimensions:
432mm(W) x 617mm(D) x 671mm(H)
17"(W) x 24¼"(D) x 26⅜"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1 2013
· LEED Compliant
· MaP tested 800g
Shipping:
Cube 4.3
GW 72 lbs
4760BKV Lined Tank
4760BKV-L Lined Locking Tank (optional)
Notes:This toilet is designed to rough-in at a minimum dimension of 254mm (10") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.Important: Dimensions of fixtures are nominal and may vary within the range of tolerances establishedby ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Colours To Be Specified:Colour: Soft White
Optional
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
· ADA Guidelines & ANSI A117.1
www.contrac.caPage 113
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
IAPMO cUPC
ASME A112.19.2 / CSA B45.1-2008
ADA Guidelines & ANSI A117.1
CERTIFICATIONS
Chelsea Wall Mount Sink
FEATURES
Vitreous china
Front overflow hole
Single hole, 4" or 8" faucet center
Mounting hardware supplied
Optional metal support leg
(Supplied by others)
Faucet not included
19⅛"(W) x 17⅜"(D) x 8½"(H)
COLOURSoft white
SINGLE HOLE 4610BHW
4" CENTER4640BHW
8" CENTER4680BHW
Ø
Ø
Ø
Notes: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to complywith the local disability codes and standards prior to installing the product.
Product Specs:
· Vitreous china
· Front overflow hole
· Single hole, 4" or 8" faucet center
· Mounting hardware supplied
· Optional metal support legs (Supplied by others)
· Faucet not included
Overall Dimensions:
485mm(W) x 440mm(D) x 215mm(H)
19⅛"(W) x 17⅜"(D) x 8½"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
· ADA Guidelines & ANSI A117.1
Shipping:
Cube 1.88
GW 26.5 lbs
4610BHW Single Hole4640BHW 4" Center4680BHW 8" Center
485mm(19⅛")
Dimensions shown for location ofSupplies and “P” Trap are suggested.Provide reinforcement for wall supports.*Actual dimensions must be taken from fixture.
Single hole, 102mm(4") or 204mm(8")
70mm(2¾")
60mm(2⅜")
216mm(8½")
84mm(3¼")
Overflow Hole
18mm(¾")
44mm(1¾")
32mm(1¼") 105mm(4⅛")
Access HolesFor Metal Stands (x6)
107mm(6¾")
440mm(17⅜")
787mm(31") Min
-869mm
(34") Max.
756mm(29¾") Min
-781mm
(30¾") Max.
Finished Floor
133mm(5¼")
6x BracketAnchor Hole(8mm Dia.)
Anchor Screw Hole x 2
Mounting Bracket
Supplies As Required
Drain Plug Outlet 1¼" O.D. Waste
215mm(8½") 235mm
(9¼")279mm
(11")
204mm(8")
64mm(2½")
CHELSEAWALL MOUNT SINK
Colours To Be Specified:Colour: Soft White
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 115
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
IAPMO cUPC
ASME A112.19.2 / CSA B45.1-2008
ADA Guidelines & ANSI A117.1
CERTIFICATIONS
CassidyFEATURES
COLOURSoft white
SINGLE HOLE 4313DGX
4" CENTER4343DGX
8" CENTER4383DGX
Vitreous china
Rear overflow hole
Single hole, 4" or 8" faucet center
Mounting screws and cut-out
template supplied
8" Front overhang
Wall secured lavatory for countertop
or vanity installation
Faucet not included
24"(W) x 20"(D) x 7⅜"(H)
Semi-Recessed Sink
Colours To Be Specified:Colour: Soft White
Product Specs:
· Vitreous china
· Rear overflow hole
· Single hole, 4" or 8" faucet center
· Mounting screws and cut-out
template supplied
· 8" Front overhang
· Wall secured lavatory for countertop or
vanity installation
· Faucet not included
Overall Dimensions:
610mm(W) x 510mm(D) x 188mm(H)
24"(W) x 20"(D) x 7⅜"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
· ADA Guidelines & ANSI A117.1
Shipping:
Cube 2.32
GW 44 lbs
Notes: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to complywith the local disability codes and standards prior to installing the product.
4313DGX Single Hole4343DGX 4" Center4383DGX 8" Center
CASSIDYSEMI-RECESSED SINK
41mm(1⅝")64mm(2½")
63mm(2½")
35mm(1⅜")x 3 Holes
210mm(8¼")
510mm(20")
864mm(34") Max.ADA Height
610mm(24")
Finshed Wall
Counter Top
Finshed Floor
170mm(6⅝")
188mm(7⅜")
205mm(8")
685mm(27") Min.ADA Height
Single hole, 102mm(4") or 204mm(8")
Revised: Oct. 2015 5970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
305mm(12")
www.contrac.caPage 117
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
IAPMO cUPC
ASME A112.19.2 / CSA B45.1-2008
ADA Guidelines & ANSI A117.1
CERTIFICATIONS
CarminFEATURES
COLOURSoft white
SINGLE HOLE 4610BHZ
4" CENTER4640BHZ
8" CENTER4680BHZ
Wall Mount Sink with Ledge
Vitreous china
Rear overflow hole
Single hole, 4" or 8" faucet center
Mounting bracket and hardware
supplied
For concealed arm carrier
installation (fits Zurn Z1231-EZ,
Z1231-EZR, Z1253, Z1254 arm carriers)
Back splash ledge
Faucet not included
20"(W) x 18⅜"(D) x 10⅜"(H)
Product Specs:
· Vitreous china
· Rear overflow hole
· Single hole, 4" or 8" faucet center
· Mounting bracket and hardware supplied
· For concealed arm carrier installation (fits Zurn
Z1231-EZ, Z1231-EZR, Z1253, Z1254 arm carriers)
· Back splash ledge
· Faucet not included
Overall Dimensions:
510mm(W) x 467mm(D) x 262mm(H)
20"(W) x 18⅜"(D) x 10⅜"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
· ADA Guidelines & ANSI A117.1
Shipping:
Cube 2.87
GW 38 lbs
Notes: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASMEstandard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to complywith the local disability codes and standards prior to installing the product.
4610BHZ Single Hole 4640BHZ 4" Center 4680BHZ 8" Center
44mm(1¾")64mm(2½")
32mm(1¼")x 3 Holes
212mm(8⅞")
110mm(4⅜")
510mm(20")
416mm(16⅜")
160mm(6¼")
160mm(6¼")
410mm(16⅛")
467mm(18⅜")
193mm(7⅝")
864mm(34") Max.ADA Height
x2 Carrier Arm HolesØ60mm(2⅜")
Finshed Wall
Finshed Floor
262mm(10⅜")
685mm(27") Min.
ADA Height
205mm(8")102mm (4")
Single hole, 102mm(4") or 204mm(8")
Ø27mm(1") x 6 Floor Stand Holes
CARMINWALL MOUNT SINK WITH LEDGE
Colours To Be Specified:Colour: Soft White
Back View
Revised: June 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
www.contrac.caPage 119
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Vitreous china
Rear overflow hole
Single hole, 4" or 8" faucet center
Mounting bracket and hardware
supplied
For concealed arm carrier instal-
lation (fits Zurn Z1231-EZ, Z1231-EZR,
Z1253, Z1254 arm carriers)
Faucet not included
20½"(W) x 23"(D) x 21⅜"(H)
IAPMO cUPC
ASME A112.19.2 / CSA B45.1-2008
ADA Guidelines & ANSI A117.1
CERTIFICATIONS
FEATURES
COLOURSoft white
SINGLE HOLE
4610CHZ4" CENTER4640CHZ
8" CENTER4680CHZ
SHROUD4644CHZClayton Wall Mount Sink
with Shroud
Product Specs:
· Vitreous china
· Rear overflow hole
· Single hole, 4" or 8" faucet center
· Mounting bracket and hardware supplied
· For concealed arm carrier installation (fits Zurn
Z1231-EZ, Z1231-EZR, Z1253, Z1254 arm carriers)
· Faucet not included
Overall Dimensions:
520mm(W) x 585mm(D) x 543mm(H)
20½"(W) x 23"(D) x 21⅜"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2008
· ADA Guidelines & ANSI A117.1
Shipping (Sink):
Cube 2.93
GW 49 lbs
Shipping (Shroud):
Cube 1.48
GW 21 lbs
4610CHZ Single Hole4640CHZ 4" Center 4680CHZ 8" Center4644CHZ Shroud
CLAYTONWALL MOUNT SINK WITH SHROUD
Colours To Be Specified:Colour: Soft White
520mm(20½")
419mm(16½")
130mm(5⅛")
140mm(5½")
90mm(3½")100mm(4")
Ø25mm(1") x 6 CarrierArm Locking Holes
79mm(3⅛")
Finished Wall
Finished Floor
Toe Clearance
Knee Clearance
184mm(7¼")208mm(8⅛") 32mm(1¼")
44mm(1¾")64mm(2½")
584mm(23")
543mm(21⅜")
314mm(12⅜")
Single hole, 102mm(4") or 204mm(8")
838mm(33") Max.
695mm (27⅜")685mm
(27") Min.
203mm(8")
279mm(11")
759mm (29⅞") 735mm
(29") Min.
229mm(9") Min.
Revised: Oct. 20155970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
x2 Carrier Arm Holes
Ø60mm(2⅜")
10mm(⅜")
70mm(2¾")
222mm(8¾")
89mm(3½")C/L of supplies
267mm(10½") 318mm
(12½")
391mm - 419mmMaxMin
(15⅜" - 16½")
432mm(17")
C/L of ¼" O.D. waste
265mm(10½")
8mm(⅜")
390mm(15⅜")
155mm(6⅛")
370mm(14½")
Shroud
Important: This sink is designed to comply with ADA ASME A117.1 and OBC barrier-free standard when installed in accordance with this measurement. Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.Minimum 230mm (9") ADA toe clearance. Adjustable distance to comply with overall unit height.
NOTE: When using a fixed distance carrier arm system, please refer to the min/max dimensions that arereferenced on the actual instruction spec sheet included with the product.
www.contrac.caPage 121
Issued: October 2015The images shown are a representation of the finish and color, and may not reflect every characteristic possible.
Vitreous china, with Nanoglaze
Single hole faucet center
Built-in backsplash
Offset drain
No overflow (to prevent
contamination)
Slanted deck to prevent
water pooling
Mounting hardware supplied
For concealed arm carrier
(provided by others) installation
Acrylic shroud leg included
Faucet not included
20½"(W) x 18¾"(D) x 23"(H)
IAPMO cUPC
ASME A112.19.2 / CSA B45.1-2013
CSA Z8000-11
CERTIFICATIONS
FEATURES
COLOURSoft white
SINGLE HOLEWITH SHROUD 4610AFVHygienic Sink
Wall Mounted Hygienic Sink
with Shroud
HYGIENIC SINKWALL MOUNTED HYGIENIC SINK WITH SHROUD
Colours To Be Specified:Colour: Soft White
Product Specs:
· Vitreous china, with Nanoglaze
· Single hole faucet center
· Built-in backsplash
· Offset drain
· No overflow (to prevent contamination)
· Slanted deck to prevent water pooling
· Mounting hardware supplied
· For concealed arm carrier (provided by others) installation
· Acrylic shroud leg included
· Faucet not included
Overall Dimensions:
520mm(W) x 475mm(D) x 585mm(H)
20½"(W) x 18¾"(D) x 23"(H)
Compliance Certifications:
Meets or exceeds the following:
· IAPMO cUPC
· ASME A112.19.2 / CSA B45.1-2013
· CSA Z8000-11
Shipping:
Cube 3.5
GW 57 lbs
4610AFV Single Hole with Shroud
Dimensions shown for sink installation height are suggested.
Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
842mm - 864mm(31" - 34")
260mm(10¼")
585mm(23")
72mm
FinishedWall
Finished Floor
(2⅞")
x2 Carrier Arm HolesØ60mm(2⅜")
420mm(16½")
Back View
280mm(11")
320mm(12½")
520mm(20½")
475mm(18¾")
375mm(14¾")
190mm(7½")
Ø25mm(1") x 6 Arm Locking Holes
Ø35mm(1⅜")
Ø43mm(1⅝")
Ø68mm(2⅝")
155mm(6⅛")
92mm(3⅝")
75mm(3")
140mm(5½")
140mm(5½")
120mm(4¾")
265mm(10½")
95mm(3¾")
105mm(4⅛")
220mm(8⅝")
100mm(4")
71mm(2¾")
60mm(2⅜")
245mm(9⅝")
320mm(12½")
290mm(11⅜")
290mm(11⅜")60mm(2⅜")
x2 Moutning HolesØ10mm(⅜")
x2 Moutning HolesØ16x22mm(⅝" x ⅞")
230mm(9")
420mm(16½")
10mm(⅜")
Revised: Oct. 2015 5970 Chedworth Way, Unit A, Mississauga, ON, Canada L5R 3V5 www.contrac.ca
© Copyright Contrac® 2015. All rights reserved.
This catalogue contains information on a variety of our vitreous china products distributed by Contrac®. While the informationcontained in this catalogue was believed to be accurate at the time of printing, it is not guaranteed to be so, and it is subject to change. Please contact
a Contrac® customer service representative should you require in-depth information on aproduct or its application.
1.888.256.7551 www.contrac.ca
5970 Chedworth Way, Unit A, Mississauga, Ontario, Canada L5R 3V5www.contrac.ca